Kramer Single Page Switcher Template AV Control Software Instruction Manual

Using the Single Page Switcher Template
This article will explain how to download the 'single page switcher template' and use it for a project
1. Change the background.
There are three pages in this template that can have their background changed.
2. Rename the buttons.
■
Go to Entrances in the 'control screen' panel and click on 'Set input names'.
■
Click on the input name to set.
■
In the property
for the
set variable action, set the variable value
to equal whatever you want each input to be called.
3.
Remove buttons and add switching commands.
■
For less than 8 inputs, delete the buttons you don't need.
■
For more than 8 inputs, see the article on Creating a Template to properly add more buttons.
■
Drag the switching commands onto the input buttons (the example below uses a Kramer VP-773 as the switcher).
4. Drag volume and mute commands onto their corresponding buttons.
5.
On the welcome page:
■
Drag the display power on command (and any other power on commands)
to the full screen button.
6. On the exit page:
■
Drag all power off commands to the 'yes' button.
7. Save and sync
">