Installation and Operating Guide I Warranty

Model Numbers lZ42PX2D/Z42PX2DH/Z42PX2tDiZ42PX21DH I PLASMA TV ze

1

0

(!> Z(XWI i}ht 2OO__,LG Electronics USA, Inc,

zenit h_,__

Warning/Caution

WARNING/CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER

SERVICEABLE PARTS iNSiDE REFER TO QUAUF_ED SERVICE PER_NNEL

The lightning flash w_h arrowhead sym_I, ve]tege" within the product's enclosure that may be of st.dfi_

cient magnitude to constitute a risk of e_estric shock to persons.

The exclamation im_nt anca point within an equilateral triangle is intended to alert the user to the presence of operating and maintenance (se_icing) instructions in the literature accompanying the app[F

WARNING/CAUTION:

TO PREVENT F_RE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAiN OR MOISTURE_

FCC NOTICE

A Class B

digital

device

This equipment has been tested and found to comply with the _imits for a Class B digital device, pursuant to Part

15 of the FCC Ru_e& These limits are designed to provide reasonable protection against harmfu_ interference in a residential installation, This equipment generates, uses and can radiate radio frequency energy and_ if not inst_m_ and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference wi[I not occur in a particular instai[a_en, ff this equipment d_s cause harmful interference to radio or television reception, v_ich can be determined by turning the equipment off by one or more of the foilowing measures: and on, the user is encouraged to try to correct the interference

° Reorient or relocate the receiving antenna.

- hcrease the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Consult the dealer or an experienced radio[TV technician for help_

• Any changes or modifications not expressly approved by the party res_nsible for comptF

ance could void the user's authority to operate the equipment,

CAUTION:

Do not attempt to modify this product in any way without wntten authoriza_on from LG Electronics.

Unauthorized m,_ ific_ion could void the user's authority to operate this product.

COMPLIANCE:

The responsible party for this devi_ compliance is:

Zen_h E_ectronics Corporation

1o201-816_2000

Marked and Distributed in the United States by LG Electronics U.S.A., Inc.

1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 http :t!www ze n ith,co m

WARNING/CAUTION

TO REDUCE THE RiSK OF FIRE AND ELECTRIC

RAIN OR MOISTURE

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

2 Plasma TV 206_4022

I

ions

F

IMPORTANT SAFETY INSTRUCTIONS

important safety instructions shaJl be provided with each apparatus This information shalt be given in a _parate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supptied with the apparatus, This infom'_tion shaii be given in a language acceptable to the c_untry where the apparatus is intended to be used, The important safety instructions shah be entitled "important Safety Instructions".

The following safety instructions shall be includwhere applicable, and, when used, shah be verbatim as follows.

Additional safety information may be inctuded by adding statements after the end of the fomtowing safety instruction list, At the manufacturer's option, a picture or drawing th_ illustrates the intent of a specific safety instruction may be piaced imn_diately adjacent to that safety instruction :

1. Read these instructions,

2, Keep these instructions.

3, Heed ati warnings,

4. Follow all instructions,

5, Do not use this apparatus near water.

6, Clean only with dry cloth,

7, Do not block any ventilation openings. Install in accordance with the manufacturer's instructions,

8. Do not install near any heat sources such as r_lators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.

9. Do not defeat the safety purpose of the polarized or groundtng-ty_ plug, A polarized plug has two blades with

one wider that= the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the

third prong are provided for your safety, If the provided plug d_s not fit into your outlet, consult an electrician for replacement of the obsolete outlet,

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience _ceptacles, and the point where they exit from the apparatus,

11. Only use att_hments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tdpod, bracket, or table s_cHled by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid Injury from tipover.

_RTABLE CART WARNING

206_4022 Owner's Manual 3

Safety Instructions

13. Unplug this apparatus during lightning storms or when unused for long periods of time. t4. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as po_r-supply cord or plug; is damaged, liquid has been spilled or objects have fallen into

the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.

15, CAUTION concerning the Power Cord :

Most appliances recom_nd they be placed upon a dedicated circuit; that

is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owneCs manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or

cracked wire insulation are dangerous. Any _ these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration,

unplug it, discontinue use of the appliance, and have the cord replaced

with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse_ such as being

twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

16, O_door Use Marking :

WARNING - To Reduce The Risk Of Fire Or El_tric Shock, Do Not Expose This Appliance To Rain Or Moisture,

17. Wet Location Marking :

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

4 Plasma TV 206_4022

Contents

WamingiCaution

Safety instructions

...............................

.............................

3-4

2

Intr_uction

Controls ................................

Connection Options ......................

Remote Control Key Functions ...........

7

9~10

8

Installation

Accessories

Installation

..............................

_nstructions ..................

_nJ¢_ 1he TV as_ b _e wail to prote_ the set

11

11-- 12 tum_ .................................

External Equipment Connections

An_nna or Cable Connection

..........

...........

VCR Setup .........................

Extemat AiV Sou rce Setup ................

DVD Setup .............................

CableCARD _ Setup, . .................

HDSTB Setup ....................

PC Setup ...........................

Monitor Out Setup ......................

Digita_ Audio Output ......................

HDM[ ............................

11

13-18

13_14

16

17

18

18

19~21

14

15

15

16

Operation

Turning the TV On .....................

On-screen Menus Language Selection ........

Setup Menu Options

EZ Scan (Channe_ Search) ..................

ManuaJ S_n ..........................

Channe} Edit .......................

DTV Signa_ Strength ......................

Channe_ Label Setup ....................

input Source ...........................

Input Label ............................

Video Menu Options

EZ Picture ........................

Manua_ Picture Cor4rof (Custom Option) ......

Color Temperature Contro_ ................

Vi_o Reset ..........................

Audio Menu Options

Audio Language ........................

EZ SoundRite / EZ Sound ..................

22

22

26

26

26

27

27

23

23

24

24

25

25

25

Setup and Operation, Checklist

Manual Sound Controt (Custom Option)

Front Surround ....................

TV S_akers OrJOff Setup ................

BBE .................................

Stereo!SAP

Broa_asts

_me Menu Op_ons

Setup ..........

Auto CJock Setup .........................

Manual C_ock Setup .....................

On/Off Timer Setup .....................

Sleep Timer / Auto Off ..................

Option Menu Features

Aspect Ratio Contro_ ......................

Cinema 3:2 M_e Setup ..................

Caption ...............................

Caption /Text ...........................

Caption Option

JSM Meth_

..........................

...........................

Low Power ............................

Lock Menu Options

Parenta_ Lock Setup ...................

CableCARD _' Function

Cable menu options .....................

Scrambled channe_ ......................

Cable Channel List ......................

En_rgency Alert Message

EPG (Electronic Program Guide)

Brief Info ................................

EZ Mute ................................

............

...............

Freeze & Magnify ...........................

Screen Setup for PC mode ..................

.....

External Control Device Setup ................

IR Codes ................................

37

44~49

50~51

30

30

30

31

32

32

33

33

34

34

35

27

28

28

29

29

38

38

39

39

40

41

42

42

43

Programming

Programming the Remote

Codes

......................

........................

Troubleshooting

M_intenance

Checklist ......................

.................................

Product Specifications

Warranty

.........................

.................................

52

53~54

55

56

57

59 ~60

Setup and Operation Checklist

(See pages 13~21 for available connection and operational setup options,)

1. Unpack TV and all accessories, 5_ Turn video source equipment on,

2. Connect all external video and audio equipment.

see pages 13_18.

3 _nsta_Jbatteries in remote control

See page 9,

4, Turn TV on.

See page 22.

6. Select viewing

See pages

7, Fine4une

8. Additional

25.

source source

See pages 26_ _, features image

See Contents above, for TVI set up and sound ence or as required by source, to your piersona[ prefer-

After reading this m_nual, keep it handy for future reference.

206-4022 Owner's Manual 5

IntroductiOn

I n!

io n

What is a Plasma Display Panel (PDP)?

A plasma display pane_is the _atest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewabie, Re PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent _amps,

How does it work?

PDP is an array of c_tls, known as pixels, which are comprised of 3 sub pixels, corres_nding to the co_ors red, green, and blue.

Gas in a plasma state is used to react with phosphors in each subopixel to produce colored light (red, green, or b_ue) These phos- phors are the same types used in Cathode Ray Tube (CRT) devices such as televisions and common computer rr#nitors.

You get the dch, dynamic c_tors that you expect Each sub-pixel is individually controlled by advanced e_ectronics to produce over

16 million different colors.

All of these mean th_ you get perfect irr_ages that are easily viewabfe in a display that is less than 5 inches thick.

160 ° - Wide angle range of vision

"four flat panel plasma screen offers an exceptionally broad viewing angle =oover 160 degrees. This means that the disptay is dear and visible to viewers anywhere in the room who can see the screen.

Wide Screen

The screen of the Plasma Display is so wide that your viewing experience is as if you are in a theater,

Multimedia

Connect your plasma display to a PC and you can use it for conferencing, games, and tnternet browsing, The Picture-imPicture feature ailovcs you to view your PC and ,video images simultaneously,

Versatile

The light weight and thin size _kes it easy to in.It

your plasma display in a variety of locations where conventional TVs wiII not fit.

The PDP

Manufacturing

Pr_ess: a few minute colored dots may be

present

on the PDP screen

The PDP (Plasma Display Panel)_ which is the display device of this preduct_ is composed of 0,9 to 2_2 million A few cell defects will normat_y occur in the PDP manufacturing process _veral acceptable, This also occurs in other PDP manufacturers' products, tiny, minute

The tiny dots colored appearing dots visible on the screen does not mean should that this PDP be is defective, Thus a few ceit defects are not sufficient cause for the PDP to be exchanged or returned, Our production technoiogy minimizes these cell defects during the manufacture and operation of this produ_,

6 Plasma TV 206_4022

This is a simp_ffie,d representation of front panel_

Here shown may be somewhat different from your TV

Front Panel Controls

Introduction

206-4022

POWER Button

Remote Control; Sensor

MENU Button

TV/V[DEO Button

CHANNEL (V, A) B_tons

VOLUME (4,1_) Buttons

Power Standby Indicator

-Without CableCARD": Illuminates red in standby mo_, Illuminates green when the

TV i_ turned on_

-Inserting Me CabteCARD

TM

: Illuminates orange in standby mode Hluminates green when the TV is turned on

Owner's Manual 7

Introduction

CableCARD

TM

Used for

CabteCARD

TM received from

Cable Service

Provider,

Back Connection Panel

S-VIDEO [np_

A connection available to provide better picture quality than the video inp_.

VIDEO Input

Connects the video signal from a video device,

AUDIO Input

Use to connect to hear stereo sound from an externaJ devil.

RGB/AUDIO

Connect from

INPUT the monitor a PC to the output appropriate connecter

input porL

Remote Control Port

Connect your wi red remote contro_ here

DVDiDTV Input S_Video Input

(Coat, orient 1-2) Connect S-

Connect a component video!audio

device to

Video out from an S-VIDEO these acks, device to the S-

WDEO input,

Antenna input

Connect over=the o air signaEs to this

8 Plasma TV

HDMIiDVI connect a

DV}(Video) signa_ to

HDMIiDVI.

Digital Audio (DVI:

Digital Visual;

Interface/Component2)

Input/

Digital Audio Output

Connect digita_ audio from various ty_s of equipment.

Note: In standby mode, these ports wi# not work_

Audio/Video

Connect audio/video ou_ut from external device to

these jacks,

Monitor Output

Connect a second TV or Monitor

CABLE Input

Connect cable signals to this

_ack, either directly or through a cabte box.

Power Cord _cket

This -P# operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

206_4022

Introduction

When using the remote control, aim it at the remote contral sensor on the TV.

TV

- Rotates the input mode between Antenna and CabEe,

- Video, Front Video, Component 1 _2, RGB-

DTV (or RGB=PC) and HDM_!DV_

input sources, screen returns to the last TV.

Selects the remote oporating mode: TV,

DVD, VCR, AUDFO, CABLE or STB.

SeJect a mode other than TV, for the remote to operate an external device.

Extema_ input modes rotate in regular sequence: Antenna, Cable, Video, Front

Video, Component 1_2, RGB-DTV (or

RGB-PC) and HDMI/DVL input sources

(Video, Front Video_ Component 1-2 input sources are linked automatically, these are connected ) only if

Brings up the main menu to the screen,

RATIO

Changes the aspect ratio

Clears aI_ omscreen displays and returns to

TV viewing from any menu.

Lets you select the amount of time before your TV turns if.seif off

Switches the sound on or off.(Refer to p.42)

EZ

Selects a factory preset picture mode depending on the viewing environment,

Selects the sound appropriate for the program's character.

When you watch the TV, information disp_ays on top of the screen.

Not available in Component 1-2, RGB and HDM_/DVl mode.

(Refer _ p.41 )

FAV

Scralis the Favorite channels.

Tones to the recent channels.

FREEZE

Freezes the currer_Ny-viewed picture.

Main picture is frozen.

Installing Bakeries

• Open the battery compartment cover on the back side and instal_ the batteries matching correct palarity (+ with + - with =).

• Install t_ 1.5V AA batteries.

Don't mix o_d or used batteries with new ones.

Close cover.

206-4022 Owner's Manual 9

Introduction

Turns your TV or any other programmed equipment on or off, _pending on mode.

Shows program schedule

THUMB_K {Ul_'Down/Lefl) Righf_ENTER) \.

Allows you to navigate the omscreen menus "-..\ and adjust the system settings to your prefo e fence,

\-\

Setect a closed caption:

Off, CC1-4, Text1-4,

_ncreases/decreases the sound level

Selects the sound appropriate for the program's character.

ADJ

Adjusts _reen _sition_ size, and phase in

PC mode.

VCRtDVD BUTTONS

Contro_ some video cassette recorders or DVD players.

("RECORD" avai{ab_e for DVD p_ayers.) button is not

Moves the Lis_ngs Gdd forward or backward in 24 hour increments

CHANNEL UPfD,OWN

Selects available channe{s found with EZ

_an,

PAGE UP/PAGE DOWN

Moves from one full set of screen infOrma_on to the next one.

_tects MTS sound: Mono, Stereo, and

SAP in AnaL_ mode.

Change the audio

_angaage in DTV mode.

'tO Plasma TV

LIGHT

Illuminates the remote control buttons of selected mode,

206_4022

Installation

i I

Ensure that the following accessories are included with your p_asma display.

If an accessory is missing, please contact the dealer where you purchased the product

Owneds Manual Batteries Power Cord

Remote Control

2-VVaH bracke_

D-sub 15 pin Cable

Secure the TV assembly by joining it to a wa_l by using the TV!lNall

brackets.

° ff the set will be mounted on a desk top_ insert the 2 eye-bolts and tighten them securely in the up_r holes as shown.

Install the wa_l brackets on the wa[_ with 2 bo_ts _, (net suppli_ with the product), as shown,

Match Me height of the eye-boL_ and the walt brackets.

Check to be sure the eye-botts and the brackets are tightened securely_

206-4022

• _cure the TV assembly to the wal_ with strong strings or wire caMes, (not supplied with the product), as shown.

Owner's Manual 11

Ins_llation

• The TV _n be instalied in vadous ways such as on a wall, or on a des_op etc

• The TV is designed to be mounted horizontally.

The speakers shown are optonaL

• It is recommended Mat Z4 2 _× 2 D Z 4 2-_X 2D rr_de_ only be used at an altitude of _ess than 3281 feet (lO00m) to Get the best quality pi_re and sound.

.

It is recommended that Z 4 2 F_× 2 D H, Z 4 2 f' X Z 1DH model only be used at an attitu de of less than 658 t feet (200Ore) to get the best quality picture and sound,

GROUNDING

Ensure that you connect the ea_ ground wire to prevent possible electric shock If grounding methods are not possible, have a qualified electrician install a separate circuit breaker, Do not try to ground the unit by connecting _ to telephone wires, lightening rods, or gas pipes.

Shoff,,¢ircu_

Breaker

Power

Supply

For proper ventilation, allow a dear_ ance of 4 '_on each side and the top,

2,36" on the bottom, and 2" from the wail Detailed instaJtation instructions

are included in the optona[ Desktop

Stand Installaton

To Install on a Desktop

Pedestal mount minimum ailowab_eclearances for adequate ven@a_on

12 Plasma TV 206_4022

Installation

1, Analog and Digital TV signals provided on antenna

Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections

For optimum picture quality, adjust antenna direction if nee_d,

_,_,_ Malti4ami[y Dweilings/Apartments

(Connect to wa_t antenna s_ket)

Wail Antenna

ZjJ

Bror_e Wire

2. Analog and Digital TV signals provided on cable

Cable TV Wait

B_oe_ Wire

206_4022 Owner's Manual 13

Ins_llation

3. Analog and Digital TV signals provided on cable and; antenna

f

Antenna Bronze Wire

Cable IV Wa_t

Jack t'um d®kwise to t_hien.

RF Coaxial Wire (75 ohm)

To improve the picture quatity in a poor signal area, p_ease purcha_ a signal amplifier and instaJl properly.

° If the antenna needs to be split for two TVs install a '2-

Way Signal Splitter" in the connections,

° If the _tenna

er for assistance, is not installed properly, contact your deah

To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Use the JSM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.

if the 4:3 picture format is used; the fixed Jrr_ages on the sides of the screen may remain visible on the screen.

Connection Option 1

Set VCR output switch to channel 3 or 4 _d then tune the TV to the same channel number.

Connection Option 2

1. Connect the audio and video c_bles from the

VCR's output iacks to the TV input jacks, as shown in the figure.

When connecting the TV to VCR, rr_atch the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

if you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular

VCR to the Video input.

2. Insert a video ta_ into the VCR and press

PLAY on the VCR.

(Refer to the VCR owner's manuaJ .)

3. _lect the input source with using the

TViVlDEO button on the remote control Note that this TV finds the connected input sources automaticaJly for Video, Front Video and

Component 1-2. It is presumed that RGB and

HDMI!DW

sources are connected.

Do not connect to both Video and

S-Video at the same time.

O []

VCR Rear

14 Plasma TV 206_4022

Installation

How to connect

Connect the audio and video cabtes from the external equip = merits output jacks to the TV input jacks, as shown in the figure.

When connecting the -PC to external equipment, match the jack cotors (Video = yellow, Audio Left = white, and Audio

Right = red)

How to use

1 Select the input source with using the TM/VIOEO button on the rerr_>te controi Note that this TV finds the connected input sources autom_icatly for Video, Front Video and

Component 1-2 It is presumed that RGB and HDM_/DV_ sources are connected.

2, Operate the corresponding external equipment,

Camcorder

Video Game

Device

DVD

or

How to connect

I Connect the DVD video o_puts (Y, P& PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outpu_ to the AUDIO iNPUT jacks on the TV, as shown in the figure

2, If your DVD only has an S-Video output jack, connect this to the S-V_DEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

Note: If your DVD player does not have component video output, use S-Video.

How to uSe

I. Turn on the DVD player_ insert a DVD.

2, Use the TVNIDEO button on the remote control to select Component the Video or Front Video external input source.)

3. Refer to the DVD pfayeCs manaal for opera4Jng instructions.

1 or Component 2.

(If connected to S=VIDEO, select

, Component input ports

To get be_er picture quality, connect a DVD pqayer to the component inpt._t ports as shown below, l Component ports No tea:

. Digital Audio

. DigitalAudio

will not work" for Component operation has priodty are connected at lhe same lime.

I input source.

ff DigitalAudio andAUDlO L/R

I Video output ports

206-4022 Owner's Manual 15

Ins_llation

How to use

Insert the CableCARD '_ received from the came so.ice

the CabEeCARD _ slot of TV back panel.

provider to

If the pairing information a_ut this TV and the CabteCARD is auto° matically displayed on the screen, contact with the cabte service provider by phone.

Note :

* CableCARD _ have the types d Motorob3, Scientific Atlant& SCM etc.

These 3 types of CaMeCARD '_ can be uscd for this PLASMA TV.

Caution: When removing the CabteCARD _', do not drop it as this my cause impact to the

CaMeCARD r',_

This TV can receive Digi_l Over4he-a_r/Cable signals without an extemaE digi_l set-top box. However, if you do receive Digital signals from a digital set-top box or other digitaJ external device, refer to the figure as shown beUow.

This TV sup_rts HDCP (High-bandwidth Digi_l Contents Protection) protocol for Digital Contents (480p,720p,1080i).

DIgftal Set4op Box

How to connect

Use the TV's COMPONENT for vi_o connections, make the corresponding

(Y_ PB, P_) _NPUT, RGB or HDM_iDVI jack depending on your set4op box connector, Then, audio connections

How to use

1. Turn on the digitaJ set4op box. (Refer to the owner's manual for the digita_ set4op box.)

2. Use TViVIDEO on the remote controJ to select Component

Component 2, RGB-D-P¢, or HDMI!DVI source,

1,

Signa!

480i

480£_

720£

1080i

Component

Yes

Yes

Yes

Yes

1/2 . RGB-DTV _ HDM!f£)\,/t

No

Yes

Yes

Yes

16 Plasma TV 206_4022

Installation

This TV provides Rug and Play capability, meaning that the PC adjusts automatically to the TV's settings,

The TV perceives 640x480, 6OHz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly:

<When the PC supports OVl>

How to connect

1. Connect the PC to HDMI/DVI port of this TV with an HDMF-to-DVt cable(not supplied with this product).

2. If the PC(or the sound card of the PC) has a fiber optic digital audio output connector, connect the PC's audio output to DIGI-

TALAUD_O(OPTICAL) port for DW INPUT.

3. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio output to AUDLO INPUT port _ocated on the right side of RG8 iNPUT port.

How To Use

1. To get the best picture quality, adjust the PC graphics card to 1_4x768,

2. Select HDMI/DVl input source in input source option of S_UP

60Hz menu.(Refer to P.25)

T¢/VIDEO button is a_so available for this purpose.

3. Check the image on your TV. There may be noise associated with the resolution, vertical pottem, contrast or brightness in PC mode.

if noise is present, change the PC output to another reseMion, change the refresh rate to another rate or adiust the brightness and contrast on the VIDEO m,_nu unti_ the picture is dear: if the refresh rate of the PC graphic card can not be changed, change the PC graphic card or censult the manufacturer of the PC graphic card.

<When the PC supports RGB>

How to connect

1. Connect the PC to RGB _NPUT port of this TV with a RGB cable(not supplied with this product),

2. If the PC(or the sound card of the PC) has an analog audio output connector, connect the PC's audio ou_ut to AUDIO iNPUT port _ocated on the right side of RG8 INPUT port.

How To Use

1. To g_ the best picture quality, adjust the PC graphics card to 1024x76& 60 Hz.

2. Select RGB-PC input source in input source option of SETUP menu.(Refer to P.25)

Once you select RGS-PC in main input option of SETUP menu, TVNIDEO button is also available for this purpose.

3. Check the image on your TV. There may be noise associated with the resoMion, vertical pattern, contrast or brightness in PC mode.

If noise is present, change the PC output to another resolution, ch_ge the refresh rate to another rate or adjust the brightness and contrast on the VIDEO _nu unti_ the picture is dear.

If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card,

Monitor Display Specifications

Re_lution

720x400

640x480

Horizontal

Frequency(KHz)

31,469

37,927

31 469

37.861

37,500

43,269

(RGB-PC)

Vertical

Frequency(Hz)

70.08

85,03

59.94

72.80

75.08

85_,

Resolution

800x600

1024x768

Horizontal

Frequency(KHz)

35156

37.879

4&077

46.875

53.674

48.363

56.476

6&023

Vertical

Frequency(Hz)

5625

60.31

72.18

75.00

85.06

60,00

70.06

75,02

2064022 Owner's Manual 17

Ins_llation

Monitor Display Specifications (HDMIiDVL Mode)

Resolution

640x480

8_x600

Ho rizontal

Frequency(KHz)

31.469

37.861

37.500

35,156

37 _879

48.077

48.875

Vertical

Frequency(Hz)

59.94

72 80

75 O0

56.25

_,31

72,18

75.00

Resolution

1024x768

Horizontal

Frequency(KHz)

48.363

56.476

60.023

Vertical

Frequency(Hz)

60.00

70.06

75.02

The TV has a special signa_ output capability which allows you to hook up a second TV or monitor.

Connect the second TV or monitor to the TV's MONITOR OUTPUT.

See the Operating Manual of the second TV or monitor for further details regarding that devicds input setting&

Notes:

* Component, RGB-PCiRGB_DTV.

cannot be used for Monitor out.

HDM_/DVL DTV input sources

, When connecting with external audio equipments, such as amplifers or speakers ptea_ turn the TV speakers off.(Refer to p.28)

* We recommend to use the video and audio output jacks for VCR recording.

Send the TV's audio to extemaE audio equipment (stereo system) via the Digital Audio Output (Optical) port

How to conrtect

1. Connect one end of an optical cable to the TV Digita_ Audio

(OpticaO Output port

2_ Connect the other end of the opti_i cable to the digital audio (optcat) input on the audio equipment,

See the external audio equipment instruction rrk3nua_ for operation,

Note: When connoting ampfifers or speakers ptease turn the TV sl_akers p 28;

with extema!

audio equipments, such as off.(Refer to

Caution: Do not look into the optical output port,

Looking at the iaser beam may damage your vision,

18 Plasma TV 206_4022

Installation

14_H _N_TI_I MULTIM_ iI'_RF_

- HDMI

TM, the HDMi logo and High-Definition

- This TV can receive the High-Definition

-This TV supports HDCP(High-bandwidth tion,

Multimedia interface is a trademark or registered trademark of HDMI Ucensing_"

Mult_dia Interface(HDMt) or the Digital Visual lnterface(DVl).

Digital Contents Protection) Protocol for 720x480p, 1280x720p, and 1920x1080i resolu-

- When you connect this TV with a source device(DVD prayer, Set Top Box or PC) suppo_ng Auto HDMI/DVl function, the output resolu_on of the source device wilt be automatic_ly set to 1280x720p.

- If the source device does not support Auto HDMI/DV[, you need to set the output resolution appropriately.

To get the best picture quality, adjust the DVD Ptayer or Set Top Box's output reso[u_on to 1280x720p, and the PC graphics card's output resolution to 1024x76& 60Hz,

- If the source device has an HDM[ output, no other audio connection is necessary because HDMFto°HDMI both video and audio, connection includes

- If the source device has a DVl output and no HDMI output_ a separated audio connection is necessary.

<When the source device(DVD player or Set Top Box) supports HDMI>

How To Connect

1. Connect the souse device to HDMItDV] port of this TV with an HDMI cable(not supplied with this product)

2. No separated audio connection is necessary:

How To Use

- If the source device supports Auto HDM[ function, the output resolution of the source device will _ automatically

- If the source device does not support Auto NDM], you need to set the output resolution appropriately.

To get the best picture quality, adjust the output resolution of the source _v{ce to 1280x720p.

- Select HDMIiDVl input source in input source option of SETUP menu.(Refer to P.25)

TV/VIDEO button is atso ava#able for this purpose.

<When the source device(DUD player or Set Top Box) supports DVI>

set to 1280x720p.

How To Connect

I. Connect the source device to HDMI/DV] port of this TV with a HDMFto_DVI cable(not supplied with this product).

2. A separated audio connection is necessary.

3_ tf the source device has a fiber optic digital audio output, connect the audio output to DIGITAL AUDiO(OPTICAL)

INPUT.

port for DVl

4. If the source device has an analog audio output connector, connect the PC's audio outp_

right si_ of RGB INPUT port.

How To Use to AUDIO INPUT port located on the

if the source device suppo_ Auto DVt fun_on, the output resolution of the source device wif[ be autom_ticaIUy set to 1280x720p_

If the source device does not support Auto OVl, you need to set the o_put resofution appropriately.

To get the best picture quality, adjust the output resolution of the source device to 1280×720p

- Select HDMi/DVl input source in input source option of SETUP menu(Refer to £25)

TV/VIDEO button is also available for this purpose

206-4022 Owner's Manual 19

Ins_llation

Cable sample

f.-

___

4_

20 Plasma TV

(not supplied with the product)

HDMI Cable

HDMI to DVI Cable

(not supplied with the product)

(not supplied with the product)

Fiber Optic Digital Audio Cable

Analog Audio Cable(RCA type)

(not supplied with the product)

Analog Audio Cable(Stereo to RCA type)

(not supplied with the product)

jJ

206_4022

Installation

How to use

1 Connect the HDM_/DVl Source Devices(DVD Player or Set Top Box or PC) and the TV SET

2, Turn on the display by pressing the POWER button on the TV SET and HDM]iDW Source Devices remote control

3, Select HDMi/DVI Input source in input source option of SETUP menu,(Refer to P.25)

4 Check the image on your TV SET, There may be noise associated with the resofution, vertice[ pattern, contrast or brightness in

HDMt/DVI Source Devices ff noise is present, change the HDM[!DVl

Source Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu ur_tJI the picture is dear, [f the refresh rate of the PC graphics card can not changed, change the PC graphics card or consult the manufacturer of the PC graphics cord,

Notes:

Depending on the g_phics ¢_rd_ DOS mode may not work if you use a HDMI to DVI Cable

- Avoid keeping a fixed imago on the TV SET screen for a long period of time.

The fixed image may become permanently" imprinted on the _reen, Use the Orbiter screen saver when possibte_

- When Source Devices connected HDMI/DV!

input, output PC Reeolution(VGA, SVGA, XGA), Pos#io& Size may not fit to

Screen, As shown the lower picture, press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service cente_:

- When Source Devices connected HDMI/DW Input output TV SET Re.solution(48Op_ 720p 108@)_ TV SET Display fit EtA/CEA_

86I-B Specification to Scr_n_ If not, refer to the Manual of HDMI/DVI Source Devices or contact your service cente_ o In case HDMI/DVI Source Devices is not connected Cable or poor cable connectio&

Input, And In case of, Video Resolution not supported TV SET output in HDMI/DVI

"NO SIGNAL"

Source Devices,

OSD display

"INVALID in HDMI/DW

FORMAT" OSD display_ Refer to the Manual of HDMI/DVI Source Devices or contact your service center,

PC mode

in This Mode, the Supported TV SET Resolution Specification

1920 x 1080 I @ 59,94Hzi60Hz

1280 x 720 P @ 59.94Hz/60Hz,

16:9

16:9(preferred

720 x 480 P @ 59.94Hz

/ 60Hz, 16:9

720 x 480 P @ 59.94Hz

/ 60Hz, 4:3 format)

In This Mode, the Supported PC Resolution Specification

640 x 480 @ 60Hz

640 x 480 @ 72Hz

640 x 480 @ 75Hz

- 800 x 600 @ 56Hz

800 x 600 @ 60Hz

- 800 x 6_ @ 72Hz

- 800 x 6_ @ 75Hz

1024 x 768 @ 60Hz(preferred

1024 x 768 @ 70Hz

1024 x 768 @ 75Hz format)

206_4022 Owner's Manual 21

in this m_ual the OSD {On Screen Dismay) may _ different _om your T¢_s _,4_se _ is ju_ an examine to help you with the W o_ion

First cc_aeet power _ord correctly. A_this m_eer_ tf_e TV switches lo standby n_×/_ la stan_Sy moxSe_oturn TV oe. press the 0iI, _._V_DE:O ,,, OH (& iT') huron on the TV er p_ess #_ POWER

TV INPUT TVNIDEO CH (A l T)_ Num_

2 Selec_ the viewing soar_ by using TV/VID£O huron on the remo_e contro4.

This TV is programmed to remember which power state _ was last set _o. even if _'_e_,_er cord is out

3 £_er_ tie shed us :_sgtt_e TV_press t_ POWER bu_on on the r_lo_e ¢o_tro_ The TV reve_s te sta#dby mode

, t_y_ i_ter_d to be a_sy on _,acat_d'_dtscor_nect the _s_uer peg ti'o_s tt_eway _wet e_fle_.

CabteCARD _: _@mir_atee_ed in sta_dby _:_'?ede, on

• _eserd_g _e C_@CARD u:/ttumit_es orartge ia s_a_'}dbymode, fl@m_aatesgreer_ wt_ the TV is turned on

0

TV Set:up

The menus can be shown on _e s_s_'een_n the selected Iang_a_ First se_,x yc_r _anguage

1 P[ess the MENU button a_ _@n us_ & / T buses to select the _!;I n'let_j

2 P_ess tt_e _ bu_on, and _he_ u_ & 1 _ buttoo to select _e

3 P_ess _s l_ burn a_ then use _ll/_ b_tlon to select you_ desired lar_uage.

Free] this peiet on, the et_-ecreer_ mem-_s will be shown i_ the s_ec:_ed _ g_age.

4 Press EXIT butlor_ _o return tO TV vi_¢ir_ e_ _ess MENU butt0_i t:ereturn te the previous menu

22 P_asma TV 206°4022

Operatic_;_

- Automatically finds a_ c}_n_e_s available through antennae o_ cable inputs and slores them in memory on the channe{ list o Run EZ Scer_ again atter any AntennalCabte _ect_n cha_s

A password is requ red _ogain access to EZ Scan menu i_the Lock System s turned on.

t Press the MENU butto_ and _er_ use A _T button to _4ect _ _

2 Press _heI_ bU_tOna_d then _se & fT bulon to _l_t _ menu

3. Press the ENTER _lon to _gin the char_nel search

Allow EZ Scan to _plete the chan_el _rch cyc_ for ANTENNA, and CABLE.

t P_8s the MENU button and thee u_ _ _T b#Aon _o select the SETUP menu

2 Press _e _ bulon a_d thee use _ _• bulon to select Mo_ _---_n

3. Press the _ button and the_ u_e _ __ button to select TV. DT V, CATV, and

CADTV

4. Press tlr_eI_ button a_d then use A _• button 1o select chanr_/ numbe_ yeu want to add or delete,

5. Press the ENTER button to add or de_ete to_ t_e cha_el n_mber.

6_ P_÷SS[XIT button to [eh,Jm V3TV vie_¢in# or #_ess MENU button to {etl,jm V._ lhe p_evious nr_R[._

" _#s

Edit.

number _sa ph,.csiea_chat}hal t_umbe_ which is diff_,ten_hem the _om_at ct&ettne_numt_4r shown in Channe_

• When insert_n_ the Ca_eCARD_ CAT"_ CADTV i_ t'_'t worMng in Man_:_atScan.

• TV ana_ antenna(overothe-aiO TV s_qn_

D TVi dig#a_ antennatOvero#_oa)d 7V s_gna_

CATV' analog cable TV a_goa_

CADTV digitat cable TV signal

206-4022 Owner's Manua_ 28

Operation

Creaie twe d_ffere_l ly[_es d ¢hanne_ }_e_s_mmemery "Custom List '_amd

"Favorite List" from _ defautt channel hst created #ore _e EZ 8can channei a._arch.

- A Cus_em Ust can _ created by _Ogg_ingeach c_'_aenelca _ eft wilh ENTER button The char_neB im t_a Cus_;,m Ust are di%_ayed ir_black eolef, and ihe

cPannels de_ete_ from the Custom List are disp_ay_ in gray color_ Once a e_nnel is highlighted y_ can add or delete the channe_ by re_erring _othe s_aH window a_the t¢,_p-_lta:)me_ d the screen You cam c_ea_e yew ow_

Fav<:>dleLieL Usa t_e FAV bu_on er_ lhe _emeLe (,'_'drOIwhen a channel h_gh_ghted and then y_ can add or _leta the channel totfrom the _avo_te

Met

1. Press the M_NU bution and then u_ _ _ burton to se_eeith_sS_ menu

2, Press the _ button and thee us4__ _ bu_'_ to se_ct C_r_el _

3 Press the _ button _ou wil_ now see a ec_eer'_filled w_tb ¢_ne} humors and a previ@_:picture

4. Use _ t_ _ f_ button to select a ehah_el and then _ the ENTER but_e to add or de_e_ it. Press FAV button to add bhe channeI to the Favorite Def.

5. Pleas EX_ bu_on _ retain te TV viewir_ or _ress MENU bu_on to i'etum to _he previous menu

,. Shows how strong your DTV signal is and whaler you need to adiust you_ antenna _ digita_cable input

The b_ghei, the signal strength, the _esslikely y_ ale to expe_'_nce picture degtadati_}_

OTV S_nal: Only when the inf,)t£ signal _sDTV or CADTV tbis function is available

1, Press the _ENN buiten ar_l then u_ & _ bu_on ta s_e_i the $_JP me#u

2, Press the _ button and then u_ & __ butto_ _#se_ct _r_ s_

3 Vi_w the on-screen s_gna_s_en_h monitor to see _hequa_i_ d _e signa_ being r_;_e_ved

4, P_ess _J(,|T button to return to TV viewing or p_ess M_NU button _o_etum to the previous menu

P/asma TV

" C_OOSe _ies_ labeb fo_ your charalels

I_ a channel tabe_is provid¢_don the si_e] frorn the broadcasting station_ the 'IV displays a abort name _or a channel even _ you did_t preset a _abetfar the o_nnek

1 Press l_/e MENU ba_lan and the_ use A _V button to selee_ the &_J'P me#u

2 Preen _e It, butteH and the_ use A ,,'_' butto_ to select _r_l _k

8 Press the IP bu_ea Y(_._wil! n(_w s_ a sereen filled with Let_S and a preview scr_n,

4 U_ the CHAfv bu_oa to selee_ a ¢_{_ne{ to Label

5 U_ A _T/< fib buttoe to seIect the appropriate tabe_ for the channel, thee press ENTER buses 1os_ the Labe_ to the setect_td channel

_fyou press _NTER butten in %V view ng made, you w_ltsee the ohan_e_ banner.

, _or e×ampte:

Change the p,_;_uresource so you can watch your SV, cable *D_,VCR; DV©, o_ any other devices that are cennect_ _o you_ TV

1_ Press the MENU baSeR and then u_ • _ bu_en to _lect She_;_

2 Press the !_ batto_ a_s_then u_ _ t_ but!_

|_ se}_st _ _ce menu.

3 Press the _ bud!on a_'_dthef_ u_ & /• bu_o# to select the sea,tee: Anten[ia

Cable, Video, Fr_

HDMVDVI

Video, Come.eat1

Cotangent2 RGB*Di'V (or RGB.PC)_

4. Press EXI_ b_tton to re[urn to TV view_ o{ press M_NU buti_os to [e_um to the previous menu

• _:_t_jgle _GB:DTV acid RGB-PCI sdect RGB-DT_(e¢ RGB-P@_ and preen _ :

Sets a ilabei to each _npat source or le[s you skp _he #spul so _rce whi@ is eat in u_ when yeaJpress TVtVI_O bu_on.

1. Press the M_U bui_oa a[_d _herr u_ _ __ butter' te select lhe _P menu

2 Press the_ button and then u_ & _V button to s@ect _ut_!

3 Press the _ button and then use _ z• bu_en to select the source: Video, Front

Video Component1 Comanche2, RGB HDMitDVL

4 Press the _il z_ bulto_'_to select the la_l

5 Press _XIT buttor_ to retain to TV v@wing or press _EN_ buttc_ to return to the previous menu

2064022 Owt_r_ Manual 25

Opera#on

°

EZ Picture a@usts the TV lot me best p<ture ap[_arar'_;e Se_eet me preset va_t_ n the EZ Pic1_._{e based on me pr_ram category

-

W_en adiestin 9 Video menu options (contrast brightness cob< sharpness, Int end color temperalure menua_ y; EZ

Pictere autoi_r_k_a _ychanges to ¢Qst_om

Dayl|ght N_ma!

Hight T|_, the factory and are not ad}us_b_e.

Movie Video Game a_d Spot_ settings are preset fo_ op_m_._mpketure quaiit# a_

1 Press Ibe _ PIC butto_sre_aled@ to select lhe picture ap_a[arlce setup eption as sh@wnbelow:

Custom (your own set_mgs} Daylighi, Norn__l Night Time Movie, Vt_ _me, ned Spor_;_

Yo_ can also e_e the V_EO mena to adjust _ Pi_wte.

2 Press the EX_ button to save and return b TV v_w_n 9 or pre_s MENU be_on to return _ the prevmoe menu.

Adius_ _he p_etureappearance b s_it yo_ prefe_enee and v_ew_r_9

1 Press ibe MENU bu_bn ned thee use & _V button to sel_;t the _ menu

2 Press _e I_ bu_on and then use A YV button to seteet _he_s_r_ picture option

3. Press the _ button and _en usa _I ziP,bulton to make appropriate adjus_en[s.

4_ Press EXIT bu_e_ k] return to TV viewing or press MEN_ butIo_ Io return _:O p_evio_s menu

Ch(_se on_ d thr_ automatm @lot adi_sstmente Set to warm _oenhan¢:e _tter colo_s sueh as _d _ _ b eoo_b see tess inten_ cobrs with mo_e blue

1 Press the MENU bu:R_ and thee use & _V button lo se_e/_tlhe V;_EO merm

2 Press tF_;_ button ar_ thee a_ A _• bu_ee to ee_:mtC_

3 Press the _ butto_ mid then use & ¢• b_on t_ se_ @her _

W_

_r_e_e ot

4 Press _XIT batten to return to 7V vi÷wing o_ press _NU baron 1o _etum to the previous menu.

Use te qUeHy reset al_ _he Video menu opt{ons to their otig na_factory p[esw_t ve_es

1 Press, #_e MENU baron and tber_ use & _V b_[ton to select the V_

2 Pres_ _ _ bu_on and then u_ ,1_ ,-_ button to se_ct V_ _,

3, Press tt-_ I_ butt_ lo reset the V_deo menu options _o _ig_nal vah#es, me_u,

26 P@sma TV 20G45_2

Other _ar_esges may be ave tabIe it a digital signa _sprovided by the broad° casting statler

1_Press the MENU button and then use A _V bu_en to sel_t the A_O menu

2 Press _el_ buAon and _en use A _T but"ton to select A_,_ La,_e.

3, Press _he i_ button and then use A _V b_Jttor_to se_ecL Er_glsh Spanish_ or

_:ench

4 Press E×_ butt_q to ret_m to TV viewing _ press MENU bu_on te return to the previous menu,

.. Scans to: chang_-_ _nsound _e_e/durra9 eommerciais, than adjusts the sound to r_atch the speoiiied audio level EZ Sour_Rite makes sure that _he volume lave! remains consisi:en_ whether you ale watchiag a commercial or a regu{ar

TV pr_am

1. Press the MENU bu_4o_ and then use A _V bu_ton te saint the &_ menu.

2 Press the Ib bu8or_ and then use A JT button to seteCt _Se_r_le.

3, P_ess the _ but_¢_'_ and then use & _ V batten to setec_ _ e: _.

4, Press EX_ butk_n to Letde te TV v_ewin 9 ar press M_NU butten te re_um to the p[evio_s reeeu

EZ Sound lets you enio_ the best S_and w_tt®_J_ the TV _ts the appropriate soun:d options ba_d on t#'_ pr_ram content.

When ad}us[_ng seu_ eptioas (t_ble _ss a_d f_ant earre_nd) manualiy_ EZ Sound ee_'na_cai/y switches _o C_to_.

N_mal Stature News Mu_c ar_:l T_te_ are prese_ for go_ seund quality at 1he factory and are eat adius_able

I Press the EZ SOUND bulten ref_ated_y te select _he appropriate

C_tom (y_;_r own se4tings}

- You _n al_ adiuet _ _"_

No_al in the

S_a_

AUDIO

_ews mere

M_C

2. Press _IT me_o s{_Jnd setup and Theater, as shown below: bb_o£ to save and return to TV viewing o_ press MEN_ buses to rett_m to t_e p_evious

,. Adiust the _eund to suit you: _ste end r_m situations.

1. Press _e MENU butte# and then use _ _V butto_ to select the _0 menu_

2 Press the I_ button and then use _ _V buAon |o setect tte desired sound ep#on

(_alance T_e'_le n,r _)

3 Press the _ b_tton and then use _ z_ butt_ to make appropriate ad_as_ents

4 Press EX_ button to re[uT_ to TV viewing or press M_NU bu_e_ to return to _P_e pd:)vious me_,

206-4022 Owner_ Manual 27

Ope_at_en

is a tr'adernafk of SRS Lab_. Ir_c

.* TruS_foued XT technoi:_y is l_rs_fpora_ed _m_ £cense tom SRS Labs _rs;

Manufactured u_r tcense _ro_ Do_by Labyatories "Oolby_ ar_ the _oubte D symbol are #adem_rks d Do_by babo[atof/e4_

1 Press t£@MENU bu_ a#d then use Ai,tT butto_ to select the Alb_:lO me_u.

2 P_e,_she !_ bulen and hen u_ A zV btJl_s_ to select Su,._d,

& Press the 1_ button and t_en _Jse& __ button to setect ¢_, _ _t'_,e_

$¥s_ or $_It {Sound Re_l#eva_System:} _o_ XII',

,3D _choSound S¥_|em

Crea_es a stu_ _g simulated stereo eff_[s from aRy _ono sound 8r_d a

_ea/stic _hree-d mensier_a_ second with a very wide and de_) seared stage rite stereo sound.

2ekes advanta_ of any rnultF.channe_format without needing _ add e×t_a speakers of equi#menb Diae9 c_ad_ bass endchmerd and the addti_._ d s_ereoaud_ enhancgment that prefixes ae immersive sound e×_f_enc_ from standard stereo material

4 Press EXIT bule;_ t; _etun to TV viewing or press MEN_ bWten _e _etum te the previous menu

TurnTV spea£ers el if using e×lemal audio equ p_-_enLFeature fume the TV

Spea_ers _Son Or_ cx eJf.

1 P_ess _he MENU butlon and then use ,L __ b_.lten to select the A_lO menu

2 P_ess the I_ b_tton and thee use ,i, f_ button _o_ee_ _Sl_e_.

3. Ress the _ b_t_n and thee use &/_ b_l_n _o_ee_ _.

4. Ress EXIT b_tof_ to return to TV viewingor press MENU button Io re_um k> the previous rr_nu

28 Pf,'_sma TV 206_4022

, BBE High Ddini_on Sound restores ctarRy and presenoe for be_er speech inie_ligibility aT_dmusic _ealism t. P_ess _ MENU buttor_ and then use A _T buttor_ to select _e A_|O menu,

2 P_÷ss the _ button and _hen use A _T button _ se_x;l _E.

3 P_e_ssthe _ button and _hen u,_ A _T button to se_;l _ or O{I.

4 Press EXIT buttes to return to TV viewing or press MENU _dtton to return to the previeus menu

• _ Manda_ured un_r license #ore _E Sound _ne.

. Treble Bass or BBE aren't suitable for _ TS_ mode.

This TV e_n receive MTS s4ereo pYc9rams and any SAP (Sec_ndeq/Audio Program) thor accompanies the stereo p_ogram: if the star,on transmits an additiona_ sound sig_a_ as well as the origine_ o_e

- Wt'_o hawng se_eceedS_eteo or SAP bt_tto_ on the remo[e control ths TV can orfly r_:,*eve the s_gnaI wb_n _heTV slatio_ transro_ts the proper s_r a_s

Mo_o sound is a#tomaSca_y rece_,_ed# the brc_d@st is only _ Mono; eve_ _eugh Stereo or SAP has been selec£ed,

- Se_'t Mono if yo_Jws_qt/e isten ie m_o sound during steree/SAP b _n9

Stereo or SAP can be r_ived in a Anaiog c_nnet

1, Use the SAP button to select you_ des#e_ MIS mo_e in e ana_ _nel Each time you prese the _P belton Mono

S_etee or SAP eppe_r in turn

" f other iang_._ee a_'eavailable (_ #_e d}gilai signa, select _hem wi_h #_e SAP bt_o_.

2. Pr÷ss _X_ b_e_r k_ save a_d _e_umto TV v_ewing.

206-4022 ©_r}ersMamJa# 29

Opera#on lhe l_ _seel autematioally from a dig_taicha_ne_ s_gna_

The di.gi_t channel eigna_ includes informa_on for Shec_rent rime provid_ by Shebroadcastin@ station

- Sol the c!_k

manually i_the current time is set incorrect!y by the auto ClOCkfunction

1 Press the MENU bu_c_ and then u_ & _*T butt_ to se_ct the T_

2 P_es #}e _ buyer at_d _en L_ A l T button te setec_ ,&u_ Ci_

3 Press _e I_ bu_ton a_d then u_ A _'V bo_len Io select _or_.

menu

4 P_e_s #_e_ button a_d then [J_) _ _• begun to select _u_ viewing a_ea t#_e zor_: _, Cen_,,-_[ Mo_t_.

Pacific, Alaska_ or _aallo

5 Press EXIT _u_ton to return te fV viewing or press M_N_ burn to return to

_he previous menu o # current _Jmeset_ng is wrong, _e_t the dock rnanuailly.

o Whe_ you set up [V guide on screen system _edIC_ se_eclrd menu is not

1 Press the _ENU bu_-} and then use & f_ butt_ to se_cl _he_

2. Press #_e!_ button ar_ _';en #_ _ __ bu_on to sele_;t M_ _.

menu,

3 Press the _ b_tten a_/J bher_use _ __ buttonto seteet eil_tBr the year, data o_ time option Once selected use _e A _ b_£ton to set the yea_ date and

_ime ®#ons

4 Press EX_ buttan to return to TV viewing or press M_N_ bu_on te re_um te ihe previous menu

,. 11mar hJne_on operates Only iSLhecurrent _me has been set.

- Off-_rne_ function overrides OmTirne_ function if they a_e bd_ set to the same t_me

The TV rnLusfbe n standby mode for ihe On-T_mer ta werk o If you do not p{ese any bu_on wathin 2 hours after the TV turns on with rne On 11mer tunrt_cm, the TV wiUautemabea_ly reve£ to standby mode

1 Press the MENU button and then u_ _ fv buttc_ to se_ct the Trt_._ menu.

2 Press trve_ butt_ and then use _ t_ buff/on to setert _ Th_,t or _T_t

3 Press #_e_ but_en and then us8 _ _ boron to select On

* To cance__I I_,u_iur_tk_ _lectOff

4. Pres_ the _ bu_on and '_henuse _ _T huron to set it_ h_r.

5. Press _e _ button a_t £hen {_se_ _ button to se_ _'_ minu_es.

6 For only _ _ f_acl_io_

Pre_ the _ button and then use _ / V button to select the channel a_turn-on.

Press the _ b_ton an_ then use & _T burn to set tb@sound lave at tureen

7 Pre_ EXIT bettoB to return to TV viewing o_ press MEN_ button to relum to _he previous meeu,

30 P@en_a TV 206,4022

he Seep T_merlures lhe ifV oft at i_e preset t_me Note tha_this _tt'_ng is c_eared wLen _ TV is turned

You can also set u_ the _leep _mer n the T_E me_,

I Press _he TIMER b_lon repeatedly to se_e¢_the number d minules ;rst _he_ option aptness on _he _'_een to!_owed by ee follew_ sleep timer options: 10 _, 30, 60, 90 120, 180, and 240 minutes

2 When _ number of minutes you want is disp_Sy_ on the set.n, press _e ENTER bution The timer begins to coun_ down from the number o_ minutes _4ected

3 _TO Fema_r_ngmihu_s before _ TV byns c_ press re@TIMER butten _ce

,, _f set _ on an8 the_e _s no inpuI[ signal the TV t_ms o# automaticaiiy m_u_es e_ter 10

1 Press #_ MENU huron and _he_ use _ t_ button to select the T_

2 Pre_s _he _ button ar_<]tte_ use _ _ I buffoe _o sd_dt _L_ Ot_.

menu

3 Pressthe I_ button ar_ th_ use A _ button to se_ @¢r=_

4 Press EXIT button to return to TV viewing or preps MEI%I_ button to re_um to _he

_evious menu

20G4022 Owne{_ Manua_ 81

- Lets yc_ choose the way ao ar_a_ picture w_tb a 43 aspect ra_io is d splayed on yc&_tT'V with a 16:9 ratio pi_ure t_ymat

When you recede an analG._picture wi_ a 4:3 aspect ratio on y_[ 16:9 TV_you need to s_ci_ how the pmture is to be dis played

If you are viewin# a picture w_th a 16:9 as_ct ratio_y_ can't use the Horizon aspect ratio option.

- _40n_onaspect ra'bo is not available to{ C_m_nent t-2(480p_20Fz1080i)/RGB@TV (480p_/1080i}t_DM!_VI*DTV

(720p/10_0@TV(720p/_ Oa_i}input _Jf_e

In RGB PC/DVI@C _apu_source on_y use 4:3 or 169 aspect ratio are available.

/ ff a fixed #_age _Sd_sp/ayed oe #_e screen @t 8 tong #me. Ltimag_emay beeline imp6n_ed _ tt_ screen and rerm_in visi_ b_e

1 P_ess the RATIO bu_ton _eT_ated_yto setect the desired pm_uCetom_at.

Y_ can a_so ad}ust _s]l_ct _-e in the 0_0_ menu.

Select the preper picture pr_..'¢_tflOnlo match the source's irr_aOe. (4:3 .....413 16:9 .....16:9)

Choose @3 when you want _ vi_ a p#;t#re with an odgina_ 4:3 aspect _a_ie wWagray bars appeari_# at both the _eRand right s_des

Choose 1_ when yo_ wan_ to ad_._stthe picture horizon_ly, in a _inear proportion to _iilt_ en_e scr_

Choose Hogan wher_ you want lo adjust _he picture in a n_4inear p@pertioe that is more en ar£_ at both sides, to create a spectacuia_ view

Zoo_ 1

Choose ZOO_ I when y_u want _o view tf_e p_ctu_ew theut any altera-i_ Howeve_ the top a_d bo_c_u portio_s of the picture wi_i be ctc_d.

Cheese _e_ _ when you want the pk;tute to l*_ a tared both verlJoa}Iy e×terFJed and ce3pped The p_u_e tak -

_g a ha_ay trad_aoff be#_@n a tera_on and screen coverage.

- Clr_ Zoom

Choose Cl_,e_a _m wren y_ wan_ Ie enlarge the picture r_uet_ the pietu_ size the _tr_ge may become d_atect_;_ eorr_t ptoporbon, : _4_e_}e

You can adjust the eo_arge preport_o_ of Cin÷ma Zoem using _ z V button The adiustment range is t.-.16,

° Moot rrFovies a_e 24 #amed_¢, but TV aigna_ is 30 ttamesi_c.

This optioe/aS the TV do 8:2 pule°down _eration _o_you to watch merges a_ the t_s_ motion appearance.

1 Press tf_ _EN_ bu_ter_and then use & _ huron to se_}¢t the O_ON metal,

2 Press lhei_ bu_)n aod then us,9 _ _V bu_ton to _ect __

3 Press _e i_ b_on and _henu_t _ _ b_t_ to select _ O_.

4. Press EXIT butten !o return to TV viewing or press MEN_ button to return to the previo_Js meRu

This feaa_'e

(}2 P_asma TV 206_4022

QDers#or_

I Press the ME_ bul{on and then see A _T bu_n to select the O_ION menu

2. Press _e _ I:<;¢_¢_at<} then _ A JV b_c_ te setec_Cc_,_l¢_

3.

Press the _ b_er_ and then _;_ A t T bu_r_ to _lect _ _' _.

4. Press EXIT b_Jttonto rehJm to I'V vi_ing er press MENU huH_ h) _lum to the previous menu.

Analog 8roa¢lcasti_ System CapUons

Select a caption mode tel displaying _tioning information i_provided on a p_ogram.

Analog oapho_ displays in_ormafl<_'_at an_ position on the screen

Te_ d_ep_eysintormatJon usua}_y at me bottom posibon and is used _ e data servia.

o Captio_/q_exL # provided by tt_ebroadcaster, wou:_dbe ava_labte fo_ botb digital and ana[_ channels en the Anten_a/Cabie

This TV is pregrammed to _mo_ize the capBoni'te_{ mode wh_eb was last set 1o, wt_n y_J t$&mlhe p_essr ell

1 Use the CC b_tt_l repestediy _e seJect ('3apt_r'_CC1 CC_, CC_ _4 TextI Te_, Te_x_3, O{ T_t4

, _Mute sho_S the selected eap_e_s option (if avaiiab_e on prcsram} when the TV sound is m_led

2 P_ese EXIT b_io_i to save aw_ _e_um to TV vi_wi_g

• You csn _iso u_ the OPTION me_ to select C_t_on/'T_

1. Press the MENU buttcm and _en use _ _ button to select the O_ION me_u.

2 Pros the _ but{<_ and then _._ _ _ V be/1_'_ta _lec_ CapttoniTex_

3 Press _e I_ b_ton 8r_ then u_, A _ button to select caption: CC_, _,,

CC4, Tex|l, T_xt_ Text, o_ Text4

¢C_

• C_'J_T|ON

The term fo_ the words that scroll across the bottom of _e TV screen usua_y the audio podi,oe d {he p_(_yam prov[<_d _er the hea_ing _ml_._red

The term _o¢_he words _hat appear in a _a_geb_ac_f_ame and a_most cover the eM_re screen usually messages provi¢_ by _he breadcaste_

4 Press EXIT bu_on to ret_ _oTV wew_ng or press MENU bu#on to _e_umto rne previous menu

D_ita!

Bto_caating System Captions

Choose _he iiang_age you wa_t the DTV/CADTV Cap_ions te appea n.

o Languages ca!_ be chosen for d_gi_alsources on_y if they a_e in8 uded o_ _he program

1.

Press the MENU b_ttOn and theh use & _V button tOseL÷ct the OPTION meeu

2. P_ess the _ b_J_ and then _;_ _ _ V bu_K_ to _lect Cap_ion/Te_.

3. Press the I_ t_g_ and _n use _ _ V but_ lo select available c_tioa laa_ guages: _llsh Spall_sh Or ¥_el'_ch

4, Press EX_ button to return to ]_Vv_ew_ngor press MEN_ button to return to the p[evio_Js mea_._

206*4022 _4ner's Manua_ 33

O_ratlon

OJstomize the DTV/CADTV captions that _;_ar on ym_r screen,

1 Press tim MENU butt_ and then uee & _Y buyers to select the O_ZON meeu,

2 Press the _ bu_on are then tee A _T bu_on b _rs_t _O1_,

3 Pre_s_tL_e_" butbn a_} titan _se Ii _t_ bL_n b s_(J C_

4 Use A _ V bu_on to c_Jsterr}izeU'mStyle Font e_c_to yo_r prderea@, A pine qew _xm is pr@_ langu_e.

a£the _xt_ d _hes_sr_r_ u_ it the captKer_

• _: Set tt_ size of t_"ewords

• rent: Seed a ty_iace br the w_s_ds

• Text @_: Ohoose a cobr tot the text.

Te_t Op_: S_,)ecfy the opacity bt the le×t (:ebr,

• Bg (_¢kg_eund)_bt:

• _ (k_:kg_o_d)_ltF

COLO.

Sebct a background colo_

Seie_t the epaci_y _or the backgrouild

• _

• _

'P_pe Se_et an e_4e lye.

_et: S_lect a c_or br em edges

5 Press EXIT b_tter_ b return te IV viewing or press MENU button to retdn

to the prevaous mer_a

A t[ozer_ s#li palate from a PCNideo game dismayed on the screen _or probnged image sore@n, rema ning even t:hough the image is chm_ged U_} our ani_

_riode wil tesuit i_ a ghost methm:_ to rain mze any f_×c_ image oil the t Press _he MENU but[c£_ and then u_ A f V bu_lee b se_ed the OPTION m÷_u

2 Pmsxstim _ button and hen use _ _V batt(m iO se#ec! __

3 Preee _£__ b_jtt_ and then use a, / V butbe to seb_ _t_er _o_aL

WaSh, _bl|e_ Ot Inve_e_

W_'te f image s_ickirtg is never a problem, SM is nel rmceseaty o set _e Nermai

• Wh|te wash

Whib Wash rem0ves _m_a_mnt images from U'mS¢_en

Note: A_ ve r_tim,_e may be _ le to dear e-nt_rdyruth

_te Wash. 7b rdum to n_ermd rip,wing, press t_ a_y buses.

• Otbltel

O_tet may help pre_est ghost images H¢_eveL it }s beet net to alb_t_ any fixed image to remain on the screen To avoid a permaner_{ image on the screen _he mage w]l move or_ce pm 2 m_rmtes: Ldt --_ RLght --_U_tde ....

_mSi@ _,_

• Inve_len hversion wil au_:m_a_icaI_ynvert lhe plasma d s{Jay pane_cob every 30 mieutes,

4 Press E_IT bu_on to return to TV viewn 4 or press MENU b_on b return to the previous menu

34 P_asma TV 20£_4022

Low _wer reduces the plasma display powe_ _msumptio_!

I P_ess the MENU but_Y_ a_"_dihen u_ A _ T bu_l{:m to se#ect _he O_'ION

2_ P_ess the _ button _r_d _he_'_ _w _wer,

3 Press the _ huron and _he_ use A _T button to se_t On O__|

" When t/_J se_ec_On the sc_eei1,da_ker_s,

4, Prese EX|T button to return to TV v_wing or press _NU bu_on to return to the pr_vio_Js r_,enu

L)peratJon

206-4022 Owner_ Manual 35

Operatien

Parenta_ Control can be used to btock specific channeis, ratings and other viewing sources

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broa_asfJng station.

The default setting is to allow al_ programs to be viewed.

Viewing can be blocked by choosing the type of the program and the cat-

e@aries. It is _so possible to block aJ[ program

1. Set ratings and categories to be blocked, viewing for a time peril.

To use this function, the following must be done :

2. Specify' a password

& Enable the lock

V-Cl_ip _lng and categories

Rating guidelines are provided by broadcasting stations.

Most television programs and television movies can be btocked by TV

Rating and/or Individua_

System (MPAA) on_y:

Cate_ries, Movies that have been shown at the theaters or direct4o-video movies use the Movie Rating

Ratings for Movies previously shown in theaters:

Movie Ratings :

• Blocking Off

,G

• PG

° PG-I 3

,R

• NC-17 oX

(Permffs all programs)

(Genera] audience}

(Parental guidance sug_sted)

(Parents strongly cautioned)

(Restricted)

(No one 17 and under admitted)

(Adult onty)

If you set PG-13 ; G and PG movies wilt be available _ PG-13, R NC-17 and X will be b_ocked_

Ratings for Television programs including

"_G

• TV-PG

• TV-14

• TV-MA

° TVoy

• TV-Y7

(Genera{ made-for-TV audience)

(Parental guidance suggested)

(Parents strongly cautioned)

(Mature audience only)

(AII children)

(Children 7 years older) movies :

TV Rating Children:

° Age

• Fantasy Violence

(applies

(applies to TV-Y, TWY7) to TV=Y7)

TV Rating General:

• Age

• Dialogue - _xual dialogue

• Language - adult language

• Sex - sexual situations

• Violence

(applies

(applies

(applies to TV-G, to TV-PG, to TV*PG,

TV-PG,

(applies to TV-PG, T\J-14)

TV-14,

TWt4,

TV-14,

(applies to TV-PG, TV-14, TV-MA)

TV-MA)

TV-MA)

TV-MA)

Input Block

• Video, Front Video

° Component 1_ 2

• RGB_ HDMI/DW

(On, Off)

(On, Off)

(On, Off)

36 Plasma TV 206_4022

SOt up bisck n9 schemes to baock s_3f_c charmers ratings and o×lema_ viewing sources o A d s nsquited to gain access toth_s

1, Preesthe MENU hUrOn and _n useA _T buttontoselect _CK menu.

Then_ press the _ _._c_

• The TV is Set up wtlb the ini_al password "0-O-G0k

2. Use the A V button to _s_

_t_on is seceded change _e settings _o y,ca_{pr_erence_

- Lock System: En\a_es of dtsabbs _e b_ki_g _heme you set up prevF ousG

" _ Password: Cha_ge tbe password by inputting a rsew passwe_d twice

- Bi_k Cl_aot: BlOcks any chancels tha_ you do _t want to watch or that you do not want your children to watch

, Mov_ _tng (MPAA): BtOC_Smovies a_:xsording_o tf'_ _:_vie ratings iimts specified so children canRo_ v_w ceR_in movies, You can set the rat.,

_gS iimit by biock n 9 e{Jt alli_L® movies wdh the ra_mgs above a s_ecit_ed

_ve_ K_D n mind mat the m@ae _at ngs I_rat_on_y appi_es to movies shown on TM not fV pr_rams., s_h as soap _as

. TV _attog-Chtldra: Preveets citdld_en from wawh n9 set.in

c_i!@'e_YsTV programs a_O_di_ to the ratings iimit ee_ _ho ehi_dre_ rating does act apply _o other TV programs Unless ye_sb_ock oeMa_nTV programs iintendo ed k_ mahJre audiences n the TV Rating ,- sub menu your @'gdren can view those pr_rams,

• W P_ttng-Ger_ral: _ssed on the ratings blocks cer_in TV pr_rams that you and your tamiiy de net want le view,

• l_p_t _i_k: Enables yo_ to se_t a so_rce to biock _om _ extemai soa_oe devices you have hooked up

3, Pte_ EX_ bursa to return to TV viewing or press _EN_ b_,£tonto return te

|t_ provisoes mer_u

* £f y_ eve€ te,_:get your pase_d,

20G4022 Owner's Manuat 37

Opera#on

* in this manual, the OSD (On Screen Display) may _ different from your TV'S because _ is just example to help the TV o_ration_

The Cable sub menu displays when inserting the CableCARD " to the TV,

= The Cab]eCARD '_ type is Motoroia_ Scientific Atlante (SA), or SCM etc, The

OSD (On screen display) is different from your TV according to your

CableCARD _ type,

1, Press the MENU button and then use A _V button to select the CA]B_ menu_

2, Press the I_ button and then use A/V button to select your desired item

3, Press the I1_ button,

4, Press EXIT button to return to TiV viewing_ nn c_e of Scientific Atlanta Cab]eCARD

TM

Le) CableCARDTM/Host _D Screen

As shown, the parring number means your TV and

CableCARD

TM tD. For further information regarding cable TV serviee, contact your Ioca_ cable TV se_,i_ provider(s).

Insert the Cab_eCARD _, If you de it at first, it _kes about 1 minute to exchange the data between the -PC and the CabieCARD "' Then, TV screen displays as shown righL

Let your cable TV service provider know CableCARD _ _D and Host ID_

If your cable TV service provider is registered CableCARD _' ID and Host ID, you can watch the premium or high value channe_

If you ever registered to the cable _ service provider, you can watch the premium or high value channel without a message,

38 Plasma TV

If the certificate _esn't match between the TV and the CabfeCARD '_' the OSD (On screen display) displays as shown _ett.

206_4022

2 ¸-

3_ 4 ¸,

I _ you enter the C_am._l

_t atle_ ru_sr_ingme EZ Scan w_theut CableCARD _' yo{J car_s_ the cable cb_r_ iist as the piclure 3 above,

2 insert the Cab!eCARD

TM

TP_enthe TV r_ewe a new cabS÷¢ha_ iist which iS _aua_y _e part chaanel, I_takes abou_ 2,~3 mim._tes to gutsier _he _/ble channei lis_ a_te_ nse@r_g lhe CabieCARD _ as _e pk:Ce_e4 above

(Occasiena_iy mere thaa _t _me}

_faf_ emerges_cy situabon occurs during watd'}ing the TV/DTV_'C,_3V!CADTV, you car_ receive a message from cable TV servioe p_evide_(s},

When receMeg an emergertcy message t_@message s @spIayed on the _reer_ as s_n betow er the chancre; is

cha_ged abtoma_cally tea chan,nei that ma_sins the em_eCgencymessage The message ,_i_iautomatically d sappear afte_ some time, ar>d return [e _he _astcha_w_el

206-4022 Owr_r_ Ma_aa_ 39

Remote Control

EPG (Electronic Program Guide)

(In DTV mode)

- Th_s sys_m has an Bledror_i¢ P_ram Osi/de (EPG} to he_pyour' navigation through a]llthe passible viewing ep_ons.

fer all available service5

o Th_sIu_tioa can be u_d on_y wi_r _he EPG ido_matien, is breadcasted by broadcasting companies

..The EPG di_lays the pr_am de_:rlBt_n _or next 7 days.

- Th_s l_nctio_ ;s on_y supped'ted i_ OTV mode

1, Press _@ GUIDE b_-_on to swrlch on EPG

2. Pre_s t_e A pT _1 _, button te _leo_ de,red program _hen p_ess the ENTER bulon to display the selected p_ogram.

3 Press the GUIDE or EXIT bulloa agai_ _esw_tch off EPG and ret_m _oTV vie_ r_g

40 P_aama 7 V 2_1)G4022

Brief Info.

- _ief !_'_foshows the p_esen_ sc_een i_lf_msbo_a,

Press the INFO but_or_to show t_qeBrief tnfe on the scr_n,

|NFO button d_s not work s Com_nentl

- Press #_e INFO bu_on or EXIT button to exit,

Com_nen_ RGB ard HDM#_V/modes.

Operation:, Vrs_hi_ TViDTV/CATV/CADTV

• W_tChir_g'_d_s Pro_t Vid_

- [r_Com_x'}en_l Componer_r2_RGB,

HDM_ffDVl rr¢_s |NFO bu_ is not

- Show _he g#esent scr_[_ ir#<_mat_on

, On Wa[ching wi_hthe upper tnput signa_,

#tess the _FO bu_on

, Press tile _NFO but_{_lor EX_ _, _o_l to eX_L

A: _snr_r info_mat_

B: Progr&m tilJe

C: Day d _k Mo_l_, Y@3[

D: P_c_ram staA _me

E: Program profess ba[

F: Program _i_ash_me

G: Pte\senttirt_

H: A_tiona_ in_mabon, Rete_ to _ icon expta_at_o_on _e r_ht

B C D F

G

O#er3tton

206-4022 Owneyis Manua_ 41

Operation

EZ Mute

Nothing to do with Caption on!Off

using MUTE button_ the mode seiected Caption/Text

When you repe_ediy press the MUTE button, the sound mode is changed in turn, is to be displayed,

(Refer to the picture below) j_

EZ Mute : a special mute mode to activate the dosed caption automaflca_iy.

Mute : Sound is muted,

T

Mute _ : Sound is enabled.

Note: EZ Mute does not operate in Com_nenbtRGB/HDMt/DVI modes,

Freeze & Magnify (DTV/CADTV 720p, or 1080i mode only)

Eniar_s the picture with correct proportions,

When enia_ing the picture, the image may become distorted,

1, Press the FREEZE button in 720p or 1080i mode.

2. Use the & V 7<1 / I_ buttons to select the screen section to be magnified.

3. To return to norma_ viewing press the FREEZE button again.

Note : The Magnify feature is avaitabte only in 720p or 1080i mode, but the

FRE_E button works in aft video formals,

42 Plasma TV 206_4022

Scr n Setup for PC mode

, When RGB cor_ned to PC iP@utand _ect the RGB,-PC, th_s function is used.

, Whe_ HDM/{TVl cormect to PC ir_put arid se_ed HDMt_'DV r_pu_ _his fonct/or_ s _lsed

, in RGBo_TV mode, SIZE and PHASE is not available,

D_$olayPC Adjust Menu Using A_UST button,

Posi'[i_a Adjust _he screen p,r_Jt_on,Afle_ displaying _he Adius_ se_t the sdeen pos_i,s_'_,

Size Adjust the scr_n sze

Phase Ad}#St tb_ phase of Pxel dock

_nHDM_/DVI@C mode, PHASE is r_ol avai_bae

Rese{ niqa_izat_ng Positi_ Size_ Phas@adjustment

_fat_v_r_

206-4022 Owner's Manua/ 48

External Control Device Setup

External Co ntrol Devi ce Set up

Conne_ the RS_232C input jack to an external control device (such _ a computer or an A/V control system) and control the Monitor's functions externally,

Connect the seda] port of the control device to the RS-232C jack on the Monitor back panel.

RS-232C connection cables are net supplied with the Monitor,

PC

No,

2 RXD (Receive data)

4 DTR (DTE si_ ready)

7

9

RTS (Ready to send)

DSR (DCE side ready)

No Connection

RXD

TXD

GND

DTR

DSR

RTS

CTS

iiii iiiii

iiiiii

7-Wire Configurations

(Standard RS-232C cable)

PC PDP

5:::

6;:;

TXD

RXD

GND

DSR

D T R

CTS

RTS

D-Sub 9 D-Sub

44 Plasma TV

@

_

O O

/.

9i

PC

3-Wi re Configu rations

(Not standard)

PDP

RXD

TXD

GND

DTR

D S R

RTS

CTS

TXD

iiiiiiiiiiiiiiiiiiiiiiii_:!i:!i:iiiii!iii!i:i::i::i:i:'J GND

DTR

i!i!i!i!i!iiii_i_:ii,li_i:_6:ii!ii!ii!ii!ii!ii:iiii!:!!ili

DSR

i!i!i!i!i!i!i!i!i!i_i_i_ii_i!i_i_ii_ii_i!_i_i!_!i

__ ___i!_!_:_!__!__!__!__!__!__!__!__!__!__!__!__!__!__!__!__!__!__!__!__!i:!____i:

D-Sub 9 D-Sub 9

206_4022

Extema_ Control Devi_'e SetKp

U_ this function to s_Jci_ a mon_to_ iD number,

Rder to ReN Data Mapping. See pa_ 46

1 Press the MENU bu_on and then use A zT baBon to select the _JP

2 Press tl_ _ b_J_ and than u_ A ,,T button to _ect S_ merm desired man _or IO number, The adNstment range d SZ_I'_ is 1 ~ 99

4. P_essEXiT b_n to return to 1V viewing or press MEt,IU button to retam to bhe previous menu,

. _ud rate 9600 bps (UART}

* Data length : 8 b_ts

" Party None

' U_< a crossed (reverse} cabS.

•Siop bit : I bi_

, Oemmuraca_on e_e : ASCii code

COMMAND ! COMMAND2 DATA

(Ne_ade#mab k a 0-o 1 OL P_

_J& Asp_ Ratio

04. Screen Mu_ k k

05, Voi_me Mute _

(_ Vo:_;me O'entr_ .............................

c d e

*

0 _ I

0--_2

0 _ 64

68. Night.s

09. C<£'_ i0. T_qt i!

Sharpness t2, O_D Seiect i3, Re_e _r_

15 _ss

I6 _arx_

17. ()s_ T;am_era_e

18 _SMMe_od

20. O¢oiter Time _:_N

2! @bRer Pix_ _1_ing j i k k k k

_

Lo_ M_e k k k i k t r

_ m i k h i s

_

P s

0 ._

0 _ 64

0,~ 64

0 ~ _

0 ~ 1

0 ,-_i

0 _..

0 ~

0 _ 2

* t *_FE

! ~3

COM: CON: D£A 0

[[CommandllC_mar_12H

" [

(1_99} on n_e and as He×a dec#nN (0×0_0x63} o_ transm!sa_on#eceiving protc_o_,

, [DATA]: _b transmit e_mand data

Transmit FW data to read status d command, lCr: Carriage Return

ASCii c_£_ OxOD

XSet _D[{ ][Oata][Cr] J

* lCemmand 1]: Frst _mand te c_trol the set.(j k,m or x}

[Command 2]: Second command to contro_ the _t,

{Set [D]: "_)u (:an a@Jst tt_eset ID _a _e desked monitor

_Dnembet In Setup menu AdNstmet_t ran_ s t

,oo99, When selec_ng Set [D 0' every connec_e_

_he Td is coatr_le& Se_ ID is indicat_ as decima

!: ASC# code space (Ox20)

[[Oommand2l[ ][Set IDI[ ][OKl[Data]Ix] ]

The Monitor t_ansm_ls #£}K (acknowledgement} based c_ this _ormat when r_eivie_ no_ma data. At this time, i_the data s data tend mode i{ ndR_es Deaent sla_es da_a {_ the data {s data write mode t returns t_e data c#the PC computa_,

DgTA1

[[Comma d2I[ [Set iDli }{NG][Datai×] ]

The Moni_o_ #ansmits ACK (acknowledgement} ba_d en this _orreat when reeeMn_ abnormal data from nOnoviaNe

_unchons or communication errors.

Data i : Negal C@

2: NO_:supported _unot_>n

3t wait more 1#he

OAT/{2 DATA4 DATA5

2S Chanrel A_i

25. I_ Select

206-4022 m x b b

_/_)_ 0!

*

Ow_rS Manuat 45

External Control Device Setup

01.

Power

(Command2:a)

• To control Power On/Off of the Monitor.

Transmission

[[k][a][ ][Set ID][ ][Data][Cr]

Data 0 : Power Off

Acknowledqement

]

1 : Power On

[[a][ ][Set ID][ ][OK][Data][x] ]

* In a like manner, if other functions transmit 'FF' data based on this format, Acknowledgement presents status about each function, data feedback

02. Input Select (Command2:b) (Main Picture Input)

• To select input source for the Monitor.

Transmission

[[k][b][ ][Set ID][ ][Data][Cr]

Data 0: DTV

1 : Analog

2: Video

3: Front Video

4: Component 1

I

5: Component 2

6: RGB-DTV

7: RGB-PC

8: HDMI/DVI

Acknowledgement

[[b][ ][Set ID][ ][OK][Data]ix] I

03. Aspect Ratio (Command2:c) (Main picture format)

• To adjust the screen format,

You can also adjust the screen format using the RATIO button on remote control or in the Option menu.

Transmission

[[k][c][ ][Set ID][ ][Data][Cr]

J

Date 1:4:3

2:16:9

3: Horizon

4: Zoom 1

5: Zoom 2

6: Set by program

10: Cinema Zoom (1)

1 F: Cinema Zoom (16)

Acknowledqement

[[c][ ][Set ID][ ][OK][Data]ix] ]

04. Screen Mute (Command2:d)

I_ To select screen mute on/off.

Transmission

[[k][d][ ][Set ID][ ][Data][Cr] ]

Data 0 : Screen mute off (Picture on)

1 : Screen mute on (Picture off)

Acknowledqement

[[d][ ][Set ID][ ][OK][Data]ix] ]

46 Plasma TV

05. Volume Mute (Command2:e)

• To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission

[[k][e][ ][Set ID][ ][Data][Cr] J

Data 0 : Volume mute off (Volume on)

1 : Volume mute on (Volume off)

2 : EZ Mute

Acknowledgement

[[e][ ][Set ID][ ][OK][Data]ix] J

06.

Volume Control

(Command2:f)

• To adjust volume.

You can also adjust volume with the volume buttons on remote control,

Transmission

[[k][f][ ][Set ID][ ][Data][Cr]

Data Min:0~ Max:64

]

• Refer to 'Real data mapping' as shown below.

A cknowledqement

[[f][ ][Set ID][ ][OK][Data]ix] ]

07.

Contrast (Command2:g)

• To adjust screen contrast.

You can also adjust contrast in the Video menu.

Transmission

[[k][g][ ][Set ID][ ][Data][Cr]

Data Min:0~ Max:64

]

• Refer to 'Real data mapping' as shown below.

Acknowledqement l[g][ ][Set ID][ ][OK][Data]ix] ]

08. Brightness (Command2:h)

• To adjust screen brightness.

You can also adjust brightness in the Video menu.

Transmission

[[k][h][ ][Set ID][ ][Data][Cr]

Data Min:0Max:64

]

• Refer to 'Real data mapping' as shown below.

Acknowledqement

[[h][ ][Set ID][ ][OK][Data]ix] J

* Real data mapping

0 Step 0

A Step 10 (SET ID 10)

F

10

!

63

64

Step 15 (SET ID 15)

Step 16 (SET ID 16)

Step 99 (SET ID 99)

Step 100

206-4022

09. Color (Command2:i)

I_ To adjust the screen color.

You can also adjust color in the Video menu.

Transmission

[[k][i][ ][Set ID][ ][gata][Cr]

Data Min:0Max:64

]

• Refer to 'Real data mapping'.

See page 46.

Acknowledqement

[[i][ ][Set ID][ ][OK][gata][x] ]

10. Tint (Command2:j)

• To adjust the screen tint.

You can also adjust tint in the Video menu.

Transmission

[[k][j][ ][Set ID][ ][Data][Cr]

Data Red:0~Green:64

J

• Refer to 'Real data mapping'.

See page 46.

Acknowledqement

[[ j ][ ][Set ID][ ][OK][Data][x] J

11.

Sharpness (Command2:k)

!_ To adjust the screen sharpness.

You can also adjust sharpness in the Video menu.

Transmission

[[k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

J

• Refer to 'Real data mapping'.

See page 46.

Acknowledqement

[[k][ ][Set ID][ ][OK][Data][x] J

12. OSD Select (Command2:l)

I_ To select OSD (On Screen Display) on/off.

Transmission

[[k][I][ ][Set ID][ ][Data][Cr]

Data 0: OSD off

J

1: OSD on

Acknowledgement

[[I][ ][Set ID][ ][OK][Data][x] J

13. Remote Control Lock Mode (Command2:m)

• To lock the remote control and the front panel controls on the set.

Transmission

[[k][m][ ][Set Ig][ ][gata][Cr]

Data 0: Lock off

Acknowledqement

[[m][ ][Set Ig][ ][OK][gata][x]

]

1: Lock on

J

14. Treble (Command2:r)

• To adjust treble.

You can also adjust treble in the Audio menu.

Transmission

[[k][r][ ][Set Ig][ ][gata][Cr]

Data Min: 0 ~ Max: 64

J

• Refer to 'Real data mapping'.

See page 46.

Acknowledqement

[[r][ ][Set ID][ ][OK][Data][x] J

15. Bass (Command2:s)

I_ To adjust bass.

You can also adjust bass in the Audio menu.

Transmission

[[k][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

J

• Refer to 'Real data mapping'.

See page 46.

Acknowledqement

[[s][ ][Set ID][ ][OK][Data][x] J

16.

Balance

(Command2:t)

• To adjust balance.

You can also adjust balance in the Audio menu.

Transmission

[[k][t][ ][Set Ig][ ][gata][Cr]

Data Min: 0 ~ Max: 64

J

• Refer to 'Real data mapping'.

See page 46.

Acknowledgement

[[t][ ][Set ID][ ][OK][Data][x] J

206-4022 Owner's Manual 47

17. Color Temperature (Command2:u)

I_ To adjust color temperature.

You can also adjust color temperature in the Video menu.

Transmission

I[k][u][ ][Set ID][ ][Data][Cr]

Data O: Medium 1: Cool 2: Warm

]

A ckno wledqement

I[u][ ][Set ID][ ][OK][Data][x] ]

18.

ISM Method

(Command2:p)

I_ To avoid having a fixed image remain on screen.

Transmission

[[j][p][ ][Set ID][ ][Data][Cr]

Data 1: Inversion

2: Orbiter

4: White Wash

8: Normal

A ckno wledoement

[[p][ ][Set Ig][ ][OK][gata][x]

I[ j ][q][ ][Set ID][ ][Data][Cr]

Data 0: Low Power off

1 : Low Power on

Acknowledgement

I[q] [ ][Set ID][ ][OK][Data][x]

I

I

19.

Low Power

(Command2:q)

I_ To control the Low Power function on/off.

You can also adjust Low Power in Option menu,

Transmission

I

I

20. Orbiter Time Setting (Command2:r)

I_ To adjust orbiter operation time term.

Transmission

I I[ j ][r][ ][Set ID][ ][Data][Cr]

Data Min: 1 - Max: FE

Acknowledgement

I[r][ ][Set ID][ ][OK][Data][x] I

21.

Orbiter Pixel

Setting (Command2:s)

I_ To adjust pixel number in orbiter function.

Transmission

I I[ j ][s][ ][Set ID][ ][Data][Cr]

Data Min: 1 ~ Max:3

Aeknowledqement

I[s][ ][Set ID][ ][OK][Data][x] I

22. Tune Command (Command: m a)

I_ To tune channel to following physical/major/minor number

Transmission

I[m][a][][SetID][][Data0][][Data1][ ][Data2][][Data3][][Data4][][Data5][Cr]I

Data 0: Physical Channel Number(Transmit by Hexadecimal code)

NTSC air:02~45

NTSC cable: 01, 0E~7D

ATSC air:01 ~45

ATSC cable:01 ~87

Data 1 ,Data 2: Major Channel Number (two part)/Channel Number (One part)

Data1: High byte

Data2: Low byte

Two part channel number: Major number-Minor number

One part channel number: If the channel band is ATSC digital cable, it can be used. In case of using one part chan nel number, minor channel does not need.

Data 3, Data 4: Minor Channel Number(Data 3: High byte)(Data 4: Low byte)

Data 5:

Main/Sub

Picture

Main

Sub

6

0

Two/One

Part

Channel

Two

1 One

5

0

Using

_hysical

Channel

Use

1 No Use

4

Resew ed x x x x x x x x x x

×

1

O

0

O

O

3

0

O

0

O

2

0

0

0

0

1

1

1

1

0

0

1

1

1

0

0

1

1

0 Step

0 NTSC Air

1

O

1 NTSO Cable

O ATSC Air

1

0

1

ATSC

C_sd

_

ATSC h_

_

ATSC irc

A'PSC c_e auto

Rese_ed x

1

×

1 x

1

...

Rese_ed

48 Plasma TV 206-4022

*

All data are transmitted by Hexadecimal code

*Two/One part Channel: 6th bit

This bit is used in a cable-ready system.

*Using physical channel: 5th bit

If the channel band is NTSC air or NTSC cable, channel tuning can be done by only physical channel.

In this case, using physical channel bit must be low(0).

But if the channel band is ATSC air or ATSC cable, there are two cases that physical channel enable or disable.

If the physical channel sending is meaningful, you should set this bit low(0).

If the physical channel sending is meaningless, yeu should set this bit high(l).

Example)

1. Analog channel: NTSC cable, channel number(35), main picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01): main picture, two part(it's not mandatory), using physical channel, NTSC cable 'xx' data: don't care major and minor channel number in case analog channel tuning.

2. Digital channel: ATSC air, channel number(don't ical channel, major(30), minor(3)), sub picture know phys-

Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub picture, two part, not using physical channel, ATSC air 'xx' data: don't care analog channel number in case digital channel tuning.

3. Digital channel: ATSC air, channel number(physical(20),major(20), minor(3)), sub picture

Command: ma 00 14 00 14 00 03 82 attribute(0x82): ture, two part, using physical channel, ATSC air.

sub pic-

A cMTo wledqement

[a][ ][Set ID][ ][OK][DataO][Datal][Data2][Data3][Data4][Data5][x]

[a] ][Set ID][ ] NG][Data0 [x

25. Input select(Command: x b) (Main Picture Input)

I_ To select input source for TV.

Transmission

I I[x][b][][Set ID][][Data][Cr]

Data Structu re

DATA(Hex) oo

01

10

11

20

21

40

41

50

6O

90

INPUT

DTV (Antenna)

DTV (Cable)

Analog (Antenna)

Analog (Cable)

Video

Front Video

Component 1

Component 2

RGB DTV

RGB PC

HDMI/DVI

Acknowledgement

I[b][ ][Set ID][ ][OK/NG][Data][x]

23. Channel Add/Del (Command: m b)

I_ To add and delete the channels

Transmission

I I[m][b][ ][Set ID][ ][Data][Cr]

Data 0: Channel Delete

1 : Channel Add

Acknowledgement

[b][ ][Set ID][ ][OK][gata][x]

[b] ][Set ID][ ][NG][Data][x]

24.

Key (Command: m c)

I_ To send IR remote key code

Transmission

J[m][c][

][Set ID][ ][Data][ ][Cr]

Data Key code: Refer to page 51.

Acknowledqement

i[c][

ID][ ][OK][Data][x]

I

I

206-4022 Owner's Manual 49

I

IRCodes

I_ Connect your wired remote contro_ to the Remote Control port on the TV:

I_ Output waveform

Sir_gte pulse, medu]at_ with 37 917KHz s_;nal at 455KHz

__J [__j 1__

Carrier frequency

FcA_=I/Tc= fosc/12

I_ Configuration of f_me

• 1st frame

Lead Low HkJh _..

" Repeat frame

__J

----_

I_ L_d eo_

__J

R_al eod_ --

9 ms

'I

I_ Repeat code

__J

9 ms

225 ms

4,5 ms u_,

I_ Bit description

• Bit "0°

__[--]

" B_ "1°

I t ,i2 ms I-'_

I_ Frame i_te_al : "If

The waveform is frar_smitled as long as a key is depresaexL

Tf T!

__I--1 _ [

TI_ 108ms @455KHz t.:,°

50 Plasma TV

224 m_

I--1I

,.!

206_4022

206-4022

Code (Hexa)

0B

OF

08

C4

C5

79

0E

65

02

03

00

39

40

41

07

06

01

1E

AA i0 ~ 19

4C

1A

09

44

43,

52

58

65

0A

CB

5A

DO

BF

D5

C6

76

77

AF

Function

TV/VlDEO

TV INPUT

POWER

POWER ON

POWER OFF

RAT_O

TIMER

Number Key 0~ 9

- (Dash)

FLASHBK

MUTE

FREEZE

VOL A

VOLv

CH ,I,

CH V

FAV

_NFO

CC

A

T

_1

I_

ENTER

MENU

_ SOUND

BXIT

FREEZE

, SAP

. ADJUST

VIDEO

_tont Video

COMPONENT 1

RGB-pO

HDMI/DVl

Ratio 4:3

Ratio t6:9

Ratio Zoom

Note

R/C Button

R/C Button

R/C Button {Power On/Off)

#!_[ete

D!_rete

R/C Button

!R #£#e (On!Y P£we[ On)

!R ##De (##lY P#vce[ 0#)

R/C Button

R/C Button

R/C Button

R/C Button

R/C Button

R/C Button

RiC Button

RIO Button

R/C Button

R/C Button

R/C Button

RiC Button

RiC Button

R/C Button

RiC Button

R/C Button

RiC Button

RiC Button

R/C Button

BtC B#tton

6_# Bu#£n

RiC Button

R/C Button

R[C By#o#

Di_ret e !B Code (Vide o input _iec#on)

Discrete IR Code (Front V!deo !nput

Selection)

Discrete !R Code (C0mponent!

!nput

Se!ec_en)

Discrete IR Code (RGB:PC Input S#lection)

Di_rete

D!_rete

D!_rete

IR Code

_R Code

_R Code

(HDMIiDV_

(Only

(Only

Input

4:3 Mode}

16:9 Mode)

Selection)

Discrete IR Code (On_y Zoom1 Mode)

IRCodes

Owner's Manual 51

Programming the Remote

I1_ The remote is a multi-brand or a universaf remote It can be pr_rammed other manufacturers.

Note that the remote rr_3y not control a_t models of other b_nds.

to operate most remote4-.,ontro_lable devices of

1, To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the corresponding

After that, press mode button on the remote the POWER button, if the device is turned off then it res_nds pro_dy and the remote need not to be programmed, if not, the remote should be programmed to operate the device.

The programming procedures are explained below.

2, Press the MENU and MUTE button continuously minatod.

at the same time for 2 secends_ the current selected device button will be il[u=

If you den"t press any button for 20 seconds, the Uight on the mode button will be turned off. in that case you have to repeat from step 2.

3. Enter code numbers using the number button on the retT_ote by refenng the code table on the following pages, When preying the button, the light blinks at a time.

If the device turned off, the programming is successful,

4. Press the MENU button to store the code.

After blinking twice, this code is stored.

5. Test the remote functions to see if the device res_nds properly.

If not, repeat from step 2.

52 Plasma TV 206_4022

Programming

Bra_ klWA kKA_

_,MPRO t_NAM

W_DBYNAMIICS

3ROKSONIC

3ANON

_,APEHART

}RAIG

_,URTIS

]AEWOO

MATHES

}AYTRON

)BX

3YNATECH

-=LECTROHOME

_:MERSON

:ISHER

:UNA_

3E

30 VIDEO

4ARleeN KAR_N

41TACHt

NSTANq*REPLAY

IOL

_CPENNY

_ENSEN

JVC

C_

036

129

003

034

031

065

112

108

012

034

059

006

029

028

108

003

03i

005

034

016 t25

072

031

0i2

035

040

043

0i2

048 i30 t07

132

012

004

043

031

031

012

043

146

046 124

033

O_

037

031

103

039

129

033

043

0,40

033

_7

108

116

135

041

0i0

110 11t

11'1 119

(,_3

053

039 043

017

031

025

034

037

131

046

138 c'J_8 009

027

035

101 i53

010

{133 063

!_

136

0,45 t44

018

_3

03"3

026

137

033

013

_

015

101

072

147

01_

1570

033

031

050 lid]

033

055

152

043

C6"J,

Stand

KENWOOD

LG (GOLDSTAR)

LLOYD

LXI

MAGIN

MAGNAVOX

MARk_TZ

MARTA

MATSU

MEII

MEMOREX

MGA

MINOLTA

MITSUBISNI

MTC

MULTITECH

NED

NORDMENDE

OPTONIDA

PANASONIO

PENTAX

PHtLCO

PHtLIPS

PILOT

PIONEER

Codes

014

047

034

048

031

03t

067

101

013

053

066

133

013

063

04.0

031

067

0i2

069

001

101

034

003

0i7

012

I_2_

0,39

034

063

0,6,8

031

101

027

031

003

033

101

046

013

013 620

04.9

651

151

034

024

040

034

023 012

04.8

043

030

{}33

0!0

034

10"2

046

020

0_

070

140,

026

034

033

071

B_21

039

013

114

013

101

034

033

014

063

134

059

039

074

145

031

067

034

101

048

,043

(Y-_

I23

014

1_

041

_7

0GI

072

139

045 04B

059 ¢_1

043

083

033

054

Brand

PORTLAND

PULSAR

QUARTZ

QUASAR

ROA

REALISTIC

R_CO

RUNC©

SAL©RA

SAMSUNG

SANSUI

SANYO

S_TT

SEARS

SHARP

SHINTOM

SONY

SOUNOESIGN

STS

SYLVANIA

SYMPHONIC

TANDY

C_

102

0i7

131

003

013

148

014

032

105

113

125

022

003

145

003

031

053

058 i08

072

011

033

013

040 i0'1

013

03i

067

034

010

031

101

031

024

003

056

077

034

_3

_7

I34

037

147

008

033

054

014

(_ 075

_'_O 033

04i

10.9

062 i40

010

145

034

0_3

144

O14

034040 i01

040

I07

115

_8

014

042

0_

_

057

078

033 f_4 i02

109

120

048

010

135

014

112

009

017

073

0110

C&_O

08-I

149

03i

058

14.9

062

076

034

104

I12

122

129

QBg

_d

TATUNG

TEAC

TECHNICS

TEKNIKA

THOMAS

TMK

TOSHIBA

TOTEVIStON

UNITECH

VECTOR R_EARCH

VICTOR

_,_DEO G_EPTS

Vl DEOSON C

WARDS

YAMAHA

ZENITH

048

012

040

003

031

053

012

034

058

008

059

040

040

0t2

039

034

03i

019

101

034

006

Codes

043

039

033

031

0!3

0_2

!0!

034

013

033

054

034

048

072

043

070

033 034

042

112

047

I31

046

0i7

034

131

039

056

080

024

040

043

101

Brand kBC kJIN kNTRONIK

_RCHER

_,A BLE STAR

_ENTUR ON

_E NTURY

CITIZEN

]OLOUR VOICE

_,OMBANO

_OMTRONICS

}_AMOND

EAGLE

_:ASTERN

LECTRICORD

3E

3EMIN_

.3

C-".,_,es

003 _,4 039 042

046

1i2

052 053

080

019

023

020

057

032

014

005

026

092

007

007

065

072

008

052

{_3,7 0i4

_

081

03,0

L_0

{_

040

066

0"22 025

074

024

O_

8rand

C¢OLFJtCHANNE2

HAMUN

H_TACHI

HOSPITALIiTY

JERROLD

LG (G©LDSTAR)

M-NET

MACOM

MAGNAVOX

MEMOREX

MOVIE TIME

NSC

OAK

PANASONIC

PARAGON

PHILIPS c_s

030

049

052

070

002

009

074

015

073

016

044 i00

006

001

037

033

010

100

028

O_

055

077

{;03

010

I_'_

012

032

028

031

047

012

055

004

052

008

069

101 005

064 079

038 071

037 053

013 02{}

Brand C_

PIONEER

065 085 0g0

034

076

051 052

_ST

PTS

N_¢_S

PRUOER

P U LS AR

RCA

REGAL

WEEK

REGENCY

REMBRANT

SAMSUNG

057

025

102

_JA_I£t,4T}FIOATLP*_C'rA 003

043

SHER_TECH 022

SIGNAL

SIGNATURE

SL MARX

016

059

011

073

100

04'1

049

030

052

030

048

074

050

07i

!01

030

011 041

L';45 046

063

072

(_8

LN-2

Brand

SPRUCER

STARCOM

STAR,GATE

TAD_RAN

TAE KWANG

TA_HAN

TANDY

TEXSCAN

TODOM

TOSHIBA

UNKA

UNTED

UNIVERSAL

CABLE

VIEWSTAR

ZENITH

Codes

047 078

002

008

_'_,.,.4 008

030

007

004

005

026

0i2

087 i00

030

110

105

017

029

039

100

C40

014

053

C_7

02?

015

088

I14

056

024

014

032

018

089

060

_--3

024

O_

086

0_3

206-4022 Owner's Manual 53

Brand

ALPBASTAR

AMPUCA

DSR

BIRDV_EW

CHANNELMASTER

CHAPARRAL

CIITOH

CURTIS

DRAKE

MATHES

DX ANTENNA

ECHOSTAR

E bECTRO

EUROPLUS

FUJITSU

HOME

Codes

050

005

011

14i

024

123

050

051

013

036

008

054

038

093

097

122

089

114

017

1_

014

955

145

0_

052

046

040

09)4

098

129

0i5

00%:_ 012

007

112

CY21 022

018

6?7

010

1!6

056 076

0S7 _8

095 g'9_

099 1_

027

Brar_

GENER__IIN_'RL_4_NT003

133

H_TACHI

}'_JL_S_ON'r_,_CKER

HUGHES

JANIEL

JERROLO

KATHREtN

LEGEND

LG

L/3TRON

LJXOR

MACOM

MEMOREX

NEX_,,'VAVE

NORSAT

060

061

108

051

001

031

139

033

057

068

132

062

010

065

057

028

069

Codes

1134

_4 016

059 i01

1_

03:,Z 039

19}4

147

144

_9 063

124

07'8

125

@29

_1

_4

Brand Codes

RACE SKY $_*TELLIT_

RANASON_C

PANSAT

PERSONAL

RHIUPS

RICO

PRESIDENT

CABLE

PRIMESTAR

PROSAT

R©A

REALISTIC

SAMSUNG

_A[ELU1'£SERWC_CO028

030

072

066

043

123 t43

060

12i

1t7

071 t05

019

_1Et'4'f _F_ ATL_A

SONY

STARCAST

SUPER GUIDE

TEECOM

085

032 t03

04 i

020

023

142

102

1!0

1_

074

03;5, 047

138

!24

02_

1ii

125

075

(257

0_,7

B_

TC,SHtBA

UNUDEN

VtEWSTA_R

WINEGARD

ZENITH

Codes i15

128

08t

091

088

137

002

0i6

044

078

101

099)

I27

025

045

079

135

I46

082

I20

107

042

048

080

136

083

130

043

_9

_6

_4

8raod

AtWA

AKA_

ANAM

BURMECTER

CARVER

CLARION

DAEWOO

DENON

EAN'rASIA

FI NEARTS

FISHER

LG(GOLDBTAR)

HAtTAn

HARMAN/KAR

NKEL

DON

C_

059

21'?

252

086

199

014

125

230

163

003

C@8

1_

014

1_

235

070

139

0t1 023

189 216

236

'3_

2_

027

102

0iS

071

022

053

148

076

060

198

130

_4

221

!43

089

001

087

190

211

034

068

037

078

122

152

O&_J

021

107

_91

6!2

{YL_

058

0?9)

149

153

024

108

192

239

062

095

150

154

OEg

110

210

188 2_

069

12!

!51

155

157 1_

189 201

225

247

159

2"2'6 22?

1@

22,2 224

243

8raod

JVC

KED

KENWOOD

KOHEL

BAD

LOTTE

LX_

MAC NAVOX

MARANTZ

MCINTOSH

MCS

MEMOREX

NAD

ONKYO

OPTIMUS

RANASON_O

PENNEY

Codes

1 i 1

002

034

097

049

104.

107

046

179

201

214

238

103

013

048

133

158

007

142

104,

O3O

045

014

100 i75

004

185

038

170

215

013

186

0_

171

L_46

016

172

176

1_

202

219

2443

040

O_

140

14-1

187

067

197

036

173

177

181

208

223

018 020

,041 081

!12

04-1

057

033 064,

22,3 24,i

089

_

025

047

132

113

251

1'74

17S

183

2!3

232

Braod

PHILIPS

PIONEER

QUASAR

RCA

RCX

REALIS_C

SAMSUNG

8ANSU}

SANYO

SCOTT

SHARP

SHERWOOD

SONY

TAE_ANG

TEAC

TECHNCS

Cedes

072

156

206

005

044

118

012

076

204

011

0i9 i06

03i t62

166

205

080

092 t03 t24

193

026

039

065 t15

113

!12

042

{_I

1_3

143

043

093 t27

_3

094

_}

18,6

(;32

_,2

184

2fY9

106

145,

194

244

135

146 182

195 203

245

138

O83 234

24_

144

05i

117

052

119

199 2_

_

045,

12_ t58

109

248 tY20 073

0?7

t05

163

1'67

_!

164

I68

233

114

249

074

161

165

169

242

010 (_55 106 136

185 187 237

101 113 128 134

Br_

TOSHIBA

THE

V_CTOR

WARDS

"YAMAHA

Codes

218 14?

137

061

088

089

054

199

131

9)55 066 092

8raod

APEX

DENON

_iGi3_L

GE

FiAR_N KAR_N

,jiVC

LG

C_des

022

020

0o5

027

012

001

014

0'_

010 016 _6

8raod

MAC NAV©X

MARANTZ

MITSUBSH

NAB

ONKYO

PANASON_C

Codes

013

024

002

023

008

003

017

_

8raod

PHiUPS

PIONEER

PROCEED

PROSCAN

RCA

SAMSUNG

C_

013

004

021

005

005

011

_i

_6

_

015

B_

SONY

THOMPSON

TOSHIBA

YAMAHA

ZENi'[!4

Codes

007

005 @_

'319 00#

009 0!8

010 06 025

54 Plasma TV 206_4022

Troubleshooting Checklist

• hstaH new batteries.

(Refer to p.9)

No or poor color.

Keep a sufficient distance between the TV and the VCR,

• Activate any function to restore the brightness of the picture,

(If sti]t picture is on the screen for more than 5 minutes, the screen gets dark.}

[ or.,o!.ros°oK,.g

f No output from o,eof

L the speakers

.

Adju_ It.=!_zrtcein the A_ZO menu. (Refer to p.27)

j

206-4022 Owner's Manual 55

Maintenance

t e n a nc e

Early malfunctions can be prevented.

Careful; and regular cleaning _n extend _e a_unt of time you win have your

new TV. Be sure to turn the power off and unplug the power cord _fore you begin any cteaning.

1.

Here's a great way to keep the dust off your screen for awhile.

Wet a soft cloth in a mixture of lukewarm water and a li_e screen fabric softener or dish washing detergent Wring the cloth until it's almost dry, and then use it to wipe the

2, Make sure the excess water is off the screen_ and then let it air-dry before you turn on your TV

To remove dirt or dust, wipe the cabinet w_th a soft, dry_ iint4ree cloth,

Please be sure net to use a wet cloth,

If you expect to leave your TV dormant for a long time (such as a vacation), it's a good idea to unplug the power cord to protect against possibie damage from _ighming or power surgec,

56 Plasma TV 206_4022

uct ons

Width (inches / mm)

Height (inches / mm)

Depth (inches / mm)

Weight (pounds t kg)

Resolution

Power requirement

Television System

Program Coverage

External Antenna Impedance

Oper_Jr_ Temperature Range

Operating Humidity Range

47.6 / 1210

27_6 f 701

11.6 / 295

79 / 35.9

852 x 480 (Dot)

AClOO-240V - 50!60Hz

NTSC-M, ATSC, 64 & 256 QAM

VHP 2 ~ 13 UHF 14 ~ 69, CATVI _ 135, CADTV 1 ~ 13& DTV 2 ~ 69

75 _

32 _ 104';'F (0 - 40°C)

Less than 80%

• The specifications shown above may be changed without prior notice for quality improvement,

Specification

206-4022 Owner's Manual 57

206_4022

Zenith will repair or replace your product, under normal use, during the warranty at Zenith's period option,

("Warranty if it proves to be defective

Period") listed consumer/end effective only user when purchase.

used in the

This warranty

United States.

is good only to the original below, effective consumer/end in material from user of the the or workmanship date of product original and is

WARRANTY

LABOR:

PERIOD:

ONE YEAR from the Date of Purchase.

PARTS: ONE YEAR from the Date of Purchase.

Effective Date of Warranty: Your warranty period

Begins on the date of sale to the original consumer/end

OF SALE user.

OR PROOF

KEEP THE DEALER'S

OF DELIVERY

DATED BILL as evidence of the purchase date.

You will be required to submit a legible copy of your bill of sale or proof of delivery when requesting warranty service.

Repair Parts and Replacement for the remaining period of the

Units original are warranted warranty.

HOW SERVICE IS HANDLED:

In Home Service.

Please Call the Zenith Interactive

Center at 1-877-9ZENITH schedule a service appointment.

(1-877-993-6484) to

Your unit will be repaired stitute model or factory option.

If repaired, or remanufactured.

or replaced reconditioned with unit, a new, subat Zenith's parts used in the repair may be new

Visit our website at http://www.zenithservice.com

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

LIMITATION,

EXTENT

ANY WARRANTY

ANY IMPLIED WARRANTY

OF MERCHANTABILITY

IS REQUIRED

WARRANTY PERIOD ABOVE.

ZENITH WILL

OR FITNESS

BY LAW, IT IS LIMITED

NOT BE LIABLE FOR

FOR A PARTICULAR

ANY

IN DURATION

INCIDENTAL,

PURPOSE.

WITHOUT

TO THE

TO THE EXPRESS

CONSEQUENTIAL,

INDIRECT,

PROFITS,

CONTRACT,

SPECIAL,

TORT, OR

OR PUNITIVE

LOST OR CORRUPTED

OTHERWISE.

DAMAGES

PROGRAMMING

OF ANY

OR

NATURE,

DATA, OR

INCLUDING,

ANY OTHER

Some states do not allow the exclusion

WITHOUT

DAMAGE or limitation

LIMITATION,

WHETHER

LOST

BASED IN of incidental or consequential damages or limitations apply to you.

This warranty on how long gives you specific an implied legal warranty rights and lasts, you may so the also above have exclusion other rights or limitation that vary may from not stat to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

• damage

• service caused required including consult requirements) incorrect the owner's

in shipping as a result manual or transit of or insufficient for improper

AC power installation, supply supply

(please

• installation verters, or repair of antenna cable company supplied other components

• set-up or adjustment in a video system on consumer systems, equipment, controls, cable conor or damage

• damage

• any unitthat caused caused by improper by other adjustments system has been modified components or incorporated into any other product

• replacement

• damage of batteries

(including on the remote control.

cosmetic damage), failure, loss or personal injury due to misuse, abuse, negligence, improper maintenance or storage, or to acts of nature or other causes beyond Zenith's control.

(Causes beyond Zenith's control include but are not limited to lightning strike, power surges, power outages and water damage.)

• Image burn-in

• repair or replacement of warranted parts by other than Zenith Authorized Service Centers.

• units purchased or serviced outside of the U.S.A.

• product where the original factory serial numbers have been removed, defaced or changed in any way.

• product sold and labeled as "as is, where is" or similar disclaimer.

The costs of repair or replacement under these excluded circumstances shall be borne by the consumer.

CONCERNING PIXEL

Plasma TVs typically

FUNCTIONALITY: contain a small number ed and is in compliance with manufacturer's ation or use of your display.

Your Plasma Television contains of pixels that do not function about normally.

specifications, indicating one

Your million display individual has been pixels.

inspectthat any pixel defects do not affect the oper-

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

To uct obtain information, locations customer assistance, or Dealer or prod-

Service

Call 1-877-9Zenith (1-877-993-6484)

365 days per year) and select appropriate menu.

Or visit our website

(24 at http://www.zenithservice.com

hours options from a day, the

• Please check your operating

• Please have your lation available.

product guide you may avoid a service model number, serial number and call.

the date of purchase or the date of original instal-

• If a replacement

Zenith against unit a credit is required, card number under some as surety circumstances for advanced you return the defective

• If a replacement unit to Zenith.

unit within unit is received,

10 working days.

please use the carton and you may shipment.

packaging be asked

Your from credit that to provide card unit will a reserve not in returning deposit be charged the if defective to

• Parts and service charge.

Other

in accordance service requirements with the Zenith will warranty be at the owner's tory warranty pendently service, write owned and operated or call the service

Zenith Customer organizations.

are Zenith's expense.

Interactive responsibility

If you have problems

Center.

Service and will be provided may in obtaining be provided without satisfacby inde-

• To assure proper credit and avoid unnecessary ing any for details.

product for Zenith Warranty Service.

charges,

Contact you must the number obtain below or a Return your

Authorization authorized Zenith before returnrepair facility

IMPORTANT: your product ty problem

Please online.

fill

This out and information that could affect you.

mail your allows

Product

Zenith

Registration to reach you

Card or promptly go to should www.zenithservice.com

we discover a safety to or register reliabili-

TO CONTACT ZENITH BY MAIL:

LG Customer Interactive Center

201 James Record Road

Huntsville, Alabama 35824 http ://www.zenithservice.com

P/N : 3828VA0528D (_)