Stand alone wall mounted DMX controller Technical datasheet Touch-sensitive
Add to my manuals
4 Pages
advertisement
146 mm
106 mm
SUNSET
Color
R G B
233 076 030
BAR
Stand alone wall mounted DMX controller
Technical datasheet Revision date 30 JULY 2013
Ref. DPAD Gold www.daslight.com
Rechargeable battery
Touch-sensitive user interface
Screw-terminal rear connector
(5 pins)
Extension socket rear connectors
(2x10 pins)
Power+DMX socket
(RJ45)
Ethernet socket
(RJ45)
Front access connections
Page 1/4
Version 1.0
11 mm data led mini usb reset button micro
SD dmx led
Package
Software
Interface, sdcard, datasheet, cdrom, usb cable
DVC3 on PC/Windows
Mobile Apps
Available colors Black frame, various front panel design
Options See the OPTIONS table
Standards
Temperature
DMX Lightpad 3 + ARCOLIS on iPhone/iPad/Android
EC, EMC, ROHS, ETL, UL (some are in process)
-10ºC to 45ºC
Dimensions
Weight
146x106x11 mm Complete package 177x146x48 mm
247 g 8.71 oz Complete package 492 g 17.4 oz
Power Supply
CONNECTION
SPECIFICATIONS
6V DC 0.6A, optional
DMX Output #1 First universe, 512 channels DMX512 output
DMX Output #2 Second universe, 512 channels DMX512 output
USB USB communication for PC/Mac software
Ethernet
Ports 1,2,...,8
User interface
Advanced networking features
8 Contact closure inputs, connect to ground for operating
10 buttons, 1 wheel, 1 color display, 5 leds
(Touch-sensitive keypad)
Micro sd card for stand alone memory use (supplied) SD card
RESET
RS232
Output relay
Clock
Push button for feet operation
RS232 serial communication for external synchronisation
Automatic standby 5V signal
Real-time clock and calendar
Built-in features
•
•
Screw-terminal rear connector
(5 pins)
Extension socket rear connectors
(2x10 pins)
•
•
•
•
Power+DMX socket
(RJ45)
•
•
•
•
•
•
Ethernet socket
(RJ45)
•
Front access connections
USB
• power/data leds
•
•
RJ2BLOCK
POWER4M
VERSIONS
OPTIONS / ACCESSORIES
RJ45 to connector block converter for POWER+DMX
Dedicated power adapter 110-220V to 6VDC
WHITE, choices of wheel design
© Daslight 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Stand alone wall mounted DMX controller
Technical datasheet Revision date 30 JULY 2013
Ref. DPAD Gold www.daslight.com
Page 2/4
Version 1.0
EASY INSTALLATION
1. Mount an electrical box inside the wall
The S.T.I.C.K. controller can be installed in any standard electrical backbox. If you use a double size box, you can insert the power supply inside.
2. Connect the wires
POWER: Connect a 5.5V or 6V DC 0.6A.
Be sure to not invert the + and the ground.
DMX: Connect the DMX cable to the lighting receivers (Leds, Dimmers, Fixtures..)
(for XLR: 1=ground 2=dmx- 3=dmx+)
3. Mount the interface on the wall
First, mount the back side of the interface on the wall with 2 or more screws
Secondly, plug the connectors :
- Ethernet cable
- DMX and power (connector block or RJ45)
POWER+DMX
WITH THE
CONNECTOR BLOCK
DC +
POWER
Ground
Ground
DMX -
DMX +
POWER+DMX
WITH THE
RJ45 CABLE
© Daslight 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
1 DMX +
2 DMX -
(
3 DMX2 +
4 POWER
5 DC +
6 DMX2 -
(
7 POWER
8 GROUND
1.......8
POWER
+DMX
Stand alone wall mounted DMX controller
Technical datasheet Revision date 30 JULY 2013
Ref. DPAD Gold www.daslight.com
Page 3/4
Version 1.0
2x10 pins EXTENSION connector
DMX CHIPS can be
replaced here
DMX
universe #1
DMX
universe #2
VIN
GND
IR_RX
3.3V
Relay
DMX2+
DMX2-
DMX1+
DMX1-
GND_DMX
4
2
8
6
12
10
20
18
16
14
11
9
7
5
19
17
15
13
3
1
PORT1
PORT2
PORT3
PORT4
PORT5
PORT6
PORT7
PORT8
RS232 RX
RS232 TX
Ref: SP485ECN-L
MAX485 CSA
BLACKOUT relay
(energy saving)
using the 2 pins : BK and G (GND)
Example of relay : FINDER
Ref. 22.23.9.012.4000
http://www.findernet.com/fr/products/ profiles.php?serie=22&lang=en
RS232 triggering
Make a cable using the 3 pins : TX, RX and G (GND)
Set the RS232 parameters to : 9600bds 8 bits, no Parity, 2 Stop bits
(x = scene number)
- To play a scene, send 3 bytes :
- To stop a scene, send 3 bytes :
- To pause a scene, send 3 bytes :
- To release a pause, send 3 bytes :
- To reset a scene, send 3 bytes : means Page B Scene #3
1 x 255
2 x 255
3 x 255
4 x 255
5 x 255
Note: the scene number (x) can be from 1 to 40. For instance, 11
Button
<
Compatible connectors:
WURTH ELEKTRONIK ref: 61301021121
MOLEX ref: 10-89-7202
TE Connectivity ref: 1-87227-0
FCI ref: 77313-101-20LF
HARWIN ref: M20-9981046
SAMTEC ref: TSW-110-xx-T-D
FARNELL ref: 1841232
RS ref: 763-6754 673-7534 251-8165
MOUSER ref: 538-10-89-7202
DIGIKEY ref: WM26820-ND
PORT triggering
It is possible to start scenes using the input ports (contact closure). To activate a port, a brief contact must be established between the ports
(1...8) and the ground (GND). This is a contact closure so there is no need to hold the connection, it acts like a basic switch.
P1 P2 P3 P4 ... GND
INTERNAL MENU (hardware configuration)
Button
>
ZONEZONE+
To access the settings menu, hold the on/off button for 3 seconds.
Mode (M): Manages the on/off button and the 4 modes (dimmer, speed, color, scene)
M OFF enable: enables/disables the use of the on/off button so that the controller is permanently on
M Dimm. enable: when enabled, scenes can be made brighter or darker
M Color. enable: when enabled, the color of a scene can be changed
M Speed. enable: when enabled, dynamic scenes can be made faster and slower
M Scene. enable: when enabled, the scene can be changed
M Auto mode: when enabled, the controller will revert to the default mode after it has been left for a specified period of time
M Auto time: the amount of time the controller will wait before reverting to the default mode
M Default: the default mode which the controller will revert to after a certain amount of time
M Dimmer 100%: when enabled, the dimmer mode will adjust between 0% and 100% without saturating to white between 100% and 200%
Arrows (A): Allows you to adjust which modes can be controlled by the arrows
A Dimmer enable: allows for the Dimmer mode to be controlled by the arrows
A Color enable: allows for the Color mode to be controlled by the arrows
A Speed enable: allows for the Speed mode to be controlled by the arrows
A Scene enable: allows for the Scene mode to be controlled by the arrows
© Daslight 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
Stand alone wall mounted DMX controller
Technical datasheet Revision date 30 JULY 2013
Ref. DPAD Gold www.daslight.com
Page 4/4
Version 1.0
Pallet (P): Allows you to adjust which modes can be controlled by the palette wheel
P Dimmer enable: allows for the Dimmer mode to be controlled by the palette wheel
P Color enable: allows for the Color mode to be controlled by the palette wheel
P Speed enable: allows for the Speed mode to be controlled by the palette wheel
P Scene enable: allows for the Scene mode to be controlled by the palette wheel
Scene (S): Scene management
S 0(off) enable: displays an empty off scene before scene 0 in each area
S Pause enable: allows a scene to be paused if the scene mode button is held for 1 second
S Stop enable: allows a scene to be stopped if the scene mode button is held for 4 seconds
S Fade enable: forces a fade time between each scene
S Fade time: the time of the automatic fade between scenes
S Auto reset: when enabled, any color, dimmer or speed overrides will be reset each time the scene is changed
S Trigger delay: adds a short delay each time a new scene is triggered, allowing scenes to be scrolled through without triggering
First Start (F): Default settings when the unit is first powered up
F Scene Nr.: specify a default scene number
F Display Time: when enabled, the time will be displayed on the screen at startup
F Scene Nr.: enables the triggering of a scene at startup. If disabled, no scene will be triggered
Trigger (T): Manages the controllers external triggering properties
T Time enable: enables the clock triggering
T Ports enable: enables the 8 dry contact ports
T RS232 enable: enables scene triggering by RS232
T IR enable: enables the infra red port (disabled by default to prevent interference)
T UDP enable: allows the controller to send and receive UDP messages required for network control
Ethernet (E): Manages the controllers network settings
Ethernet: Enables the Ethernet socket on the controller
Dynamic IP Addr: enables dynamic IP addressing (DHCP) which allows the controller to obtain an IP address from a router
Device’s IP Add: the controllers static IP address it will use if it does not receive an IP address via DHCP
Date/Time (D): Manages the date and time stored inside the controller
Date: the controllers date
Time: the controllers clock time
Graphics (G): Screen management
G Image enable: allows for images to be shown for each scene if they have been assigned in the programming software
G Image full: when enabled, the image will be displayed in full screen and the scene and area will not be visible
G Image time: the time it takes before the image is displayed in full screen
G Sleep enable: when enabled, the screen brightness will dim after a certain amount of time
G Sleep time: the amount of time to wait before sleeping
G Bright normal: the % brightness when the controller is not sleeping
G Bright sleep: the % brightness when the controller is sleeping
G Bright LED: the % brightness of the mode and reset LEDs
DMX Output (X): Manage the timings of the DMX output messages and the page priorities (advanced function!)
X MBB: Mark Before Break- the time to wait between sending each 512 channel DMX message (or ‘packet’)
X Break: Break- the time to wait just before sending a new packet, resetting the DMX line
X MAB: Mark After Break- the message which tells your receiver to begin reading data
X MBS: Mark Between Slots- the delay time between sending each DMX channels data within the DMX packet
Univ-1/Univ-2: each timing can be set differently depending on the universe number
X Alphab Mode: if the same scene is triggered in the global area and a second area, the area with the highest letter will take priority
X LTP Mode: f the same scene is triggered in the global area and a second area, the latest scene triggered takes priority
Sensitive (S): Manage the touch sensitivity settings
S USB Init: reset the touch sensitivity when the USB is connected and disconnected
S Auto Init: automatically reset the touch sensitivity after a period of time
S Auto Time: the time to wait before automatically resetting the touch sensitivity
S High Sense: when enabled, the sensitivity will be increased
S See Values: see each touch sensitive button number and palette value
Language (L): change the language of the text which appears on the screen
About: check the firmware release date and version number and assign a name for the controller
Reset: reset all settings to the factory default
SOFTWARE and LINKS
ARCOLIS sofware (Touch Lighting Editor app for iPhone/iPad, Android)
DMX Lightpad 3 (Remote application for iPhone/iPad, Android)
=>download your application from Google Play or the App Store
ESA, ESAPRO software (Windows)
ESA2 software (Windows, Mac) manuals www.nicolaudie.com (-> Support -> Downloads) www.nicolaudie.com (-> Support -> Downloads)
www.nicolaudie.com/manuals.php
© Daslight 1989-2012. All rights reserved. We reserve the right without notice to amend the technical information and specifications.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement