Yeastar Technology Escene User manual

IP Intercom

IP Intercom User Manual

IS760-P(W)

ESCENE Communication CO. LTD.

ESCENE Communication Co. Ltd www.escene.cn/en

IP Intercom

Copyright and Disclaimer

Copyright

Copyright©2014 ESCENE Communication Co,. Ltd keeps all rights reserved.

Any enterprises or individuals cannot extract ,copy and spread in any form of this document without our written permission .In accordance with the law, copying includes translating the document into other languages or conversing into other formats.

When this document is transmitted in network media, ESCENE Communication Co,.Ltd

allows downloading or printing for private use .Any parts of the document are not allowed to be modified or used for commercial purposes. ESCENE Communication Co,.Ltd will not assume any responsibility for the injuries and losses caused by any unauthorized modification or conversion of the document.

Declaration

Information regarding this guide is subject to change without any notice .

This manual provides accurate statement, information and recommendation to the largest extent, but will not guarantee for any express and implies .Users should take full responsibility for the application of products. ESCENE Communication Co,.Ltd will not make any guarantee for this manual, including but not limited to warranties for implies merchantability and particular purposes. ESCENE Communication Co,.Ltd does not assume any responsibility for indirect or consequential loss caused by the misuse of this manual.

About this manual

Thank you for choosing IP Network Intercom IS710-P(W).This IP Network Intercom is specially designed for the user under the public environment with fashionable appearance and complete functions. This manual aims to help you quickly use IP

Network Intercom IS710-P(W).Before use ,please read the packing list and safety notes section of this manual ,communicate with the system administrator to confirm if the current network environment can meet the requirements of configuring the phone. If this is your first time to use IP Network Intercom IS710-P(W),we recommend that you should read the quick installation guide and product technical manual. The document can be downloaded from the following website: http://www.escene.cn/en.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

Summary

Copyright and Disclaimer ............................................................................................................ 2

1.Getting Started .......................................................................................................................... 4

1.1 Outline ............................................................................................................................. 4

1.2 Product Features ........................................................................................................... 4

1.3 Technical Information ....................................................................................................5

2.Phone Installation ..................................................................................................................... 6

2.1 Embedded ...................................................................................................................... 6

2.2 Equipment installation ................................................................................................... 7

3.Configuration of IP intercom .................................................................................................... 8

3.1 Remote WEB Management ..........................................................................................8

3.2 Network ........................................................................................................................... 9

3.2.1 WIFI Setting ........................................................................................................9

3.2.2 WIFI Status ........................................................................................................ 10

3.2.3 LAN Setting ....................................................................................................... 10

3.2.4 PC Setting ......................................................................................................... 12

3.3 SIP Account .................................................................................................................. 13

3.4 Programmable keys ....................................................................................................14

3.5 Voice ............................................................................................................................. 14

3.6 Phone Book .................................................................................................................. 16

3.7 Advanced Setting ......................................................................................................... 16

3.7.1 Phone Setting ...................................................................................................16

3.7.2 VLAN Setting ..................................................................................................... 17

3.7.3 VPN Setting ....................................................................................................... 17

3.8 Maintenance ................................................................................................................. 17

3.8.1 Log ..................................................................................................................... 18

3.8.2 Password ........................................................................................................... 18

3.8.3 Factory reset ................................................................................................... 18

3.8.4 Auto Provision .................................................................................................19

3.8.5 TR069 Upgrade ................................................................................................20

3.8.6 FTP Upgrade ..................................................................................................... 21

3.8.8 TFTP Upgrade ..................................................................................................22

3.8.9 HTTP Upgrade ..................................................................................................22

3.8.10 Reboot ............................................................................................................. 23

3.9 Phone Status ................................................................................................................ 23

3.10 System Info ................................................................................................................ 24

3.11 Language .................................................................................................................... 25

4. Brief pictures for application environment ..........................................................................25

4.1 Door security system application ...............................................................................25

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

4.2 Fire protection system application .............................................................................26

1.Getting Started

1.1 Outline

Integrated IP network intercom panel IS710-P (W) wired, wireless-based devices is a hands-free intercom system which is adopting a new generation of IP & SIP technology and based on the innovation of carrier-grade IP telephony solution. It solves the problem of nonstandard broadcast protocol existing in the traditional IP digital broadcasting intercom system ,inadequate intelligence, weak application service capacity and the telephone network connectivity difficulty etc. This system is well-organized and its each access point do not need to be wired separately ,meanwhile as long as connecting the device to a local area network ,it can form a powerful intercom communication system with the supporting system and realize the syncretic multi-network of computer network, digital video surveillance, internal communication .Its applications involve financial sector, industrial group, rail transportation, prisons and hospitals etc.

1.2 Product Features

 High-grade brushed aluminum panel is durable ,can be surface mounted, embedded and possesses protection grade IP54 (waterproof cover should be equipped.).

 One key function of the emergency call for help, one key function of fast broadcasting, partition broadcasting, two-way and hands-free calls, remote maintenance, providing the system ports of access control, alarm, recording etc.

 Security Center can directly dial and page any intercom panels, or monitor any intercom panels.

 When facing emergency calling / being monitored, the intercom panel cannot hang up on its own initiative in order to guarantee the fluent call for help .

 It can be embedded in the wall for concealed installation or wall mounted for surface installation , which is suitable to avoid the cable from exposing users , ensure the safety of internal network information and provide the configuration port and remote configuration capabilities.

 In addition to the broadcast mode, the center and the terminal are all adopting twoway hands-free calling patterns, which helps to communicate more intimately.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

 The device has reserved the ganged port for the system of access control, alarm, video surveillance etc.

 Support remote web management and maintenance e.g. account maintenance, software upgrades, volume control and the signal control for switch value .

 Support POE power supply and external power adapter, POE function is unworkable in WIFI series .

 WIFI Series is easy to be installed with strong expansion ,its RJ45 port having a dual-use nature can be used as LAN port which is the same with the use of ordinary series when people manually turn off WIFI.

1.3 Technical Information

Phone features

WEB Multi-language ； Support 1 account line ， one key function of the emergency call for help, realize full-duplex and two-way voice intercom calls; Active / passive support

;Support calls holding, calls waiting and calls transfer; Call transfer (busy turn, blind turn, consulting turn)，mute, don't disturb(DND)，Auto answer，three-way conference, the volume control and so on；support IP direct dial without account;

Network parameters

Support SIP V1（RFC2543）,V2（RFC3261）；Support DNS SRV（RFC3263） ； Support

STUN network penetration ； Support 3 DTMF model: In-band,、RFC2833、SIP INFO ； Support

Network model ： Static IP/DHCP/PPPoE ； built-in DNS/TFTP/FTP terminal ； Support

NAT/DHCP service ； Support SIP and RTP QoS

Security

Support VLAN（802.1pq），LLDP，VPN（L2TP/OPEN_VPN）；Support TLS（Transport

Layer Security ） protocol ； Support information authentication mechanism MD5 ； Support

AES encryption protocol； Support the Root/User level management mode.

Audio features

Wideband encoding: G.722 ； Narrow band encoding: G.711

μ/A , G723.1, G726,

G.729AB ， iLBC ； Support VAD, CNG, AEC, AGC etc. audio processing ； Full duplex speaker, with automatic echo elimination (AEC).

Physical properties

Two RJ-45 10/100M Ethernet interfaces(LAN & Extension performance),under IS710-P,the

LAN port is for LAN;IS710-W LAN port for WIFI series ,when WIFI function opening ,it is PC port ， when WIFI function closing; Extension performance port;1&2 is for MIC Plus-n-

Minus,3&6is for Speaker Plus-n-Minus,4&5is for Power Plus-n-Minus,7&8 is for Button

Control Signal.

One power adapter port; IP network intercom output: 2Watts 8Ω; Power: DC 12V/1A;Two

3.5mm port, namely a recording port, a monitoring trigger alarm or other notification port.

Four 2PIN port, namely the power input, IP network intercom output and two sets of switching value inputs which can be connected to monitor equipment or other security equipment.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

Two 3PIN ports, namely 2 sets of switching value outputs which can be connected to monitor equipment or other security equipment.

One touch button, one key to quickly restore the factory value(refer to soft recovery, not hard recovery).

One high-intensitive anti-sabotage industrial button.

Each motherboard port, check the picture illustration below "Mother Broad Interface".

Carton packaging

The whole Size：168*116*42mm

Product Certification

Platform Compatibility Test (non-certificate)

ZTE/Alcatel-Lucent/Asterisk/Broadsoft/Metaswitch/Yeastar/Avaya/3CX/Elastix/HUAWEI etc.

Mother Broad Interface

2.Phone Installation

Generally system administrator will connect your new IS710-P(W)IP Phone to company

LAN network.If not,please refer to below illustration.

Open IS710-P(W)packing box,according to the packing list,check the related attachment to make sure to no omitting.Packing list as follows.

 IS710-P(W)Phone

 Quick operating guide www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

IS710-P(W) could be installed to internet according to the below steps.

2.1 Embedded

If the product is used for embedding,then the cutting of embedded need to be a little bigger than the installing hole of standard dimension 168*116*42mm .(42mm means the extra aluminum housing thickness.),as follows. Notice: the embedded value is up to the actual situation.

2.2 Equipment installation

1、Open the aluminum housing.

2、built in the IP intercom according to the cutting embedded specification. after built-in, www.escene.cn/en

ESCENE Communication CO. LTD.

fix four M3.5*12 screw on the wall with the screw driver.

IP Intercom

3 、 After installing inter housing,Well-set the related wiring and replace the aluminum housing.then power on and start testing.

3.Configuration of IP intercom

You need to know the IP address of IP network intercom before starting setting. you could learn how to get IP address below. Default IP address is 192.168.1.153.in static status. If getting from

DHCP, you need to search the related IP address by the third software scanning equipment MAC.

(getting IP by DHCP is not suggested.)

3.1 Remote WEB Management

Once input the IP address of intercom on the web browser and tap the “enter” on the keyboard. Then a login screen will pop up from the intercom equipment. You need to input user name and password. Both default user name and password of system is case letters “root” www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

After the log-in，the administrate web page of the intercom will pop up.

The setting and parameter of each option will be describe as follow.

3.2 Network

This option is used for the network setting, please notice that if you have WIFI speaker, then you could set the LAN and VPN.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

3.2.1 WIFI Setting

Pls note that the option is just support item IS710-W.

The below operation will guide you how to connect the WIFI intercom to WIFI network,if you know WIFI hot spot SSID,you could input in the text box are,you could also search

“SITE SURVEY” according to the hot spot.

3.2.2 WIFI Status

Pls note that the option is just support item IS710 -W.Once the device connect to the

WIFI hot spot,you could use the below operation to check the WIFI connecting status. www.escene.cn/en

ESCENE Communication CO. LTD.

3.2.3 LAN Setting

This option is used for setting speaker IP, as shown below.

IP Intercom

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

3.2.4 PC Setting

PC Setting could just being used in IS710-W Model.When setting network bridge pattern at PC port,you could connect another internet equipment to PC port,amount to a port of a switch.

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

3.3 SIP Account

ESCENE IP network intercom can be set up one SIP account, account’s user name, password and server address are mandatory. If all the information filled is valid and correct, then register will be launched from SIP server after submitting and saving.

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

3.4 Programmable keys

This function is reserved for the future.

3.5 Voice

You can manage the speaker volume ranks and microphones which showed in the following table. Please note that in most cases, if you open the microphone and switch to level 7, then don’t use speaker volume more than level 4, unless you can ensure that your coverage is small or noise reduction level is high.

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

3.6 Phone Book

This function is reserved for the future.

3.7 Advanced Setting

In advanced configuration, system parameters are the main points, other options, such as web dial-up, dialing rules, IP filtering strategy, ring tones, certificate management and global server, etc., most are reserved function which could be ignored.

3.7.1 Phone Setting

System parameters can be configured IP network intercom’s basic configuration, PSTN Settings (reserved), QoS, call related, VoIP call forward, time Settings, and others. The commonly used functions in the option below are mainly introduced, other functions do not be arbitrarily changed

3.7.1.1 Switch signal output

Switch signal output 1 ~ 2 which can be controlled by multiple variables, the monitoring server message control is define variable which can coordinate and adjust to be compatible with the special requirements of some particular platform.

3.7.1.2 Hot Line

Hotline function is the goal of emergency button on the panel paging, default to hotline immediately. Of course, it can be sent by different ways according to different environment.

3.7.1.3 Time Setting

IP network intercom’s time access can be SNTP, manual setting and update at the SIP server below, PSTN is reserved options.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

3.7.2 VLAN Setting

When IP network intercom‘s application environment involves the VLAN, the below operating will guide you how to use.

3.7.3 VPN Setting

When IP network intercom‘s application environment involves the VPN, the below operating will guide you how to use.

3.8 Maintenance

This part mainly introduces some maintenance method. According to the below, you can reconfigure Intercom IP Phone or view Intercom IP Phone log to gain more information about maintenance.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

3.8.1 Log

For most famous systems, log document will offer the record born by behavior change of Intercom IP

Phone. Log document information contains the question you need to investigate. It can upload log document to the appointed Server as you need to gain information from it.

3.8.2 Password

If you need to change the default password of Intercom IP Phone, so you need to configure password information. Please note that password modification to ensure safety rather than distribute to anyone, unless they allows you to interact with the Intercom IP Phone.

3.8.3 Factory reset

The following will direct you how to reset the factory default. Please note that factory reset will erase all original configuration information, so be cautious to www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom use this function. IP address will recover to be default: 192.168.1.153.

3.8.4 Auto Provision

Intercom IP Phone's automatic update feature is that it automatically read related configuration files from the server, thus to replace manual update operations. The following will illustrate related operations, such as the server name or address, verify the user name and password (optional), inspection cycle, reboot detection, etc.

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

3.8.5 TR069 Upgrade

This function will cooperate with telecom IMS platform to use. Please follow below.

www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

3.8.6 FTP Upgrade

The following will direct you when you use FTP to upgrade.

ESCENE Communication CO. LTD.

www.escene.cn/en

3.8.8 TFTP Upgrade

The following will direct you when you use TFTP to upgrade.

IP Intercom

3.8.9 HTTP Upgrade

The following will direct you when you use HTTP to upgrade.

ESCENE Communication CO. LTD.

www.escene.cn/en

IP Intercom

3.8.10 Reboot

The following will direct you if rebooting Intercom. Please note that do not reboot unless hooking or no reaction situations which is rare occurrence.

3.9 Phone Status

The following will direct you information of system operation working time, account registration status and network setting www.escene.cn/en

ESCENE Communication CO. LTD.

IP Intercom

3.10 System Info

The following will direct you equipment name, software/hardware version No, kernel version

No. and related server address.

ESCENE Communication CO. LTD.

www.escene.cn/en

3.11 Language

The following will direct you how you to change language with the intercom.

IP Intercom

4. Brief pictures for application environment

The following pictures introduce the practical application of IP intercom, take door security and fire protection for example. More compatibility application is subject to actual test.

4.1 Door security system application

ESCENE Communication CO. LTD.

www.escene.cn/en

4.2 Fire protection system application

IP Intercom

ESCENE Communication CO. LTD.

www.escene.cn/en