Owner's Manual

112 in. ELECTRIC DRILL

Double Insulated

Model No.

315.101000

Save this manual for future reference

_ CAUTION: Read and follow

all Safety Rules and

Operating Instructions before first use of this product

Customer Help Line: 1 800 932 3188

Sears Roebuck and Co Hoffman Estates IL 60179 USA

972000-630

2,99

• Safety

• Features

• Operation

• Maintenance

• Parts List

®

Pdnted in USA

• Table Of Contents ..........................................................................................................................................

2

• Warranty .........................................................................................................................................................

2

• Introduction.....................................................................................................................................................

2

• Rules For Safe Operation ...........................................................................................................................

3-5

• Product Specifications....................................................................................................................................

5

• Unpacking.......................................................................................................................................................

5

• Accessories ....................................................................................................................................................

5

• Features .........................................................................................................................................................

6

• Operation ...................................................................................................................................................

7-11

• Maintenance.................................................................................................................................................

12

• ExplodedView and Repair Parts List...........................................................................................................

13

• Parts Ordering / Service ...............................................................................................................................

14

FULL ONE YEAR WARRANTY ON COMPANION 1/2 In. DRILL

If this Companion 1/2 in. Drill fails to give complete satisfactionwithin one year from the date of purchase,

RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of

charge...............

If this Companion 1/2 in. Drill is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. .........

This warranty gives you specific legal rights,and you may also Ilave-other rightswhich vary from state,to state.

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179 ',, • _

Yourddll has many features for making your drilling operations more pleasant and enjoyable. Safety, performance and dependability have been given top priorityin the design of this drill making it easy to maintain and operate.

,_ CA_TION: Carefully read throughthis entire owner's manual before using your new drill. Pay close attention to the Rules For Safe Operation,

Warnings and Cautions. If you use your drill

properlyand onlyfor what it is intended, you will

enjoy years of safe, reliable service.

,_ WARNING:

Look for this symbol to point out important safety precautions. It means attention!H

Your safety is involved.

The operation of any drillcan result in foreign objects being thrown intoyour eyes, which can resultin severe eye damage. Before beginning power tool operation,always wear safety

gogglesor safety glasses with side shields and a full face shield when needed. We

recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses

with side shields, available at Sears Retail Stores.

2

Thepurposeofsafetysymbolsis to attractyourattentionto possibledangers.Thesafetysymbols,and

not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for proper accident prevention measures.

SYMBOL MEANING

A SAFETY ALERTSYMBOL:

Indisatesdange_waming, orcaution.Mw peusedinco_un_onwithothersym_lsorpict_raphs.

A

DANGER: Failure to obey a safety warningwill resultin sedous injuryto yourself or to others.

Always follow the safety precautionsto reducethe risk of fire, electricshookand personalinjury.

A WARNING: Failure to obey a safety waming can resultin eerious injuryto yourself or to others.

Always follow the safety precautionsto reducethe risk of fire, electricshock and personalinjury.

A

CAUTION: Failureto obey a safety waming may resultin propertydamage or personalinjuryto

yourselfor to others. Always follow the safety precautionsto reduce the dsk of fire, electdc shook and personal injury.

NOTE: Advisesyou of informationor instructionsvital to the operation or maintenance of the equipment.

DOUBLE INSULATION

Double insulationis a concept in safety, in electric power toolswhich eliminates the need for the usual three-wire grounded power cord. All exposed metal

parts are isolated from internal metal motor componentswith protecting insulation. Double insulatedtools do not need to be grounded.

_k WARNING: Do not attempt to operate this tool until you have read thoroughlyand understand completely all instructions,safety rules, etc.

contained in this manual. Failure to comply can resultin accidents involvingfire, electric shock, or serious personal injury. Save owner's manual

and review frequently for continuingsafe operation,and instructingotherswho may use this tool.

READ ALL INSTRUCTIONS

• KNOW YOUR POWER TOOL. Read owner's manualcarefully. Learn its applicationsand limitationsas well as the specificpotential hazards related to this tool.

• GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with groundedsurfaces.

For example; pipes, radiators, ranges, refrigerator enclosures.

• KEEP GUARDS IN PLACE and in workingorder.

IMPORTANT

Servicing of a tool with double insulation requires extremecare and knowledgeof the system and should be performed only by a qualified service technician. For service we suggest you return the tool

to your nearest Sears Store for repair. Always usa

originalfactory replacement parts when servicing.

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

• AVOID DANGEROUS ENVIRONMENT. Don't use power tools in damp or wet locationsor expose to rain. Keep work area well lit.

• KEEP CHILDREN AND VISITORS AWAY. All visitorsshould wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extensioncord.

• STORE IDLE TOOLS. When not in use, tools shouldbe stored in a dry and high or looked-up place - out of the reach of children.

• DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

USE RIGHT TOOL. Don't force small toolor attachment to do the job of a heavy duty tool. Don't

use tool for purpose not intended- for example -

A circular saw should never be used for cutting tree limbsor logs.

3

• WEAR PROPER APPAREL. Do not wear loose clothingor jewelry that can get caught in toors moving parts and cause personal injury. Rubber

gloves and nonskidfootwear are recommended when workingoutdoors.Wear protective hair

coveringto contain long hair and keep it from being drawn into nearby air vents.

• ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistantlenses; they are NOT safety glasses.

• PROTECT YOUR LUNGS. Wear a face or dust mask if the operation is dusty.

• PROTECT YOUR HEARING. Wear hearing protectionduring extended periodsof operation.

• DON'T ABUSE CORD. Never carry tool by cord or yank it to disconnectfrom receptacle. Keep cord from heat, oil, and sharp edges.

• SECURE WORK. Use clamps or a vise to hold

work. It's safer than using your hand and it frees both hands to operate tool.

• DON'T OVERREACH.

Keep proper footing and balance at all times. Do not use on a ladder or unstable support. Secure tools when working at elevated positions.

• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow

instructionsfor lubricatingand changing accesso- ries.

• DISCONNECT TOOLS. When not in use, before servicing, or when changing attachments, blades, bits, cutters, etc., all tools shouldbe disconnected from power supply.

• REMOVE ADJUSTING KEYS AND WRENCHES.

Form habit of checking to see that keys and adjustingwrenches are removed from tool before turning it on.

• AVOID ACCIDENTAL STARTING. Don'tcarry

plugged-intool with finger on switch. Be sure switch is off when plugging in.

• MAKE SURE YOUR EXTENSION CORD IS IN

GOOD CONDITION. When using an extension cord, be sure to use one heavy enough to carry the currant your productwilldraw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. A wire gage size (A.W.G.)

of at least 16 is recommended for an extension

cord 100 feet or less in length. A cord exceeding

100 feet is not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cordssuitable for use outdoors.Outdoor approvedcords are marked with the suffix W-A, for example - SJTW-A or SJOWoA.

KEEP BITS CLEAN AND SHARP. Sharp bits minimizestalling and kickback.

KEEP HANDS AWAY FROM DRILLING AREA.

Keep hands away from bits. Do not reach underneath work while bit is rotating.Do not attempt to remove material while bit is rotating.

NEVER USE IN AN EXPLOSIVE ATMOSPHERE.

Normal sparking of the motor could ignitefumes.

INSPECT TOOL CORDS PERIODICALLY and if damaged, have repaired by an authorizedservice facility. Stay constantlyaware of cord location.

INSPECT EXTENSION CORDS PERIODICALLY and replace if damaged.

• KEEP HANDLES DRY, CLEAN, AND FREE

FROM OIL AND GREASE.

Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool.

• STAY ALERT AND EXERCISE CONTROL. Watch what you are doing and use commonsense. Do

not operate tool when you are tired. Do not rush.

CHECK DAMAGED PARTS. Before further use of

the tool, a guard or other part that is damaged shouldbe carefully checked to determine that it will operate properly and perform itsintended function.

Check for alignment of moving parts, bindingof movingparts, breakage of parts,mounting and any

other conditionsthat may affect itsoperation,A guard or other part that is damaged shouldbe properlyrepaired or replaced by an authorized service center.

DO NOT USE TOOL IF SWITCH DOES NOT

TURN IT ON AND OFF. Have defective switches replaced by an authorized service center.

DRILLING iNTO ELECTRICAL WIRING IN

WALLS CAN CAUSE DRILL BIT AND CHUCK

TO BECOME ELECTRICALLY LIVE. Do not touch

the chuck or metal housing when drillinginto a wall; grasp only the insulatedhandle(s) provided on the tool.

• INSPECT FOR and remove all nailsfrom lumber before drilling.

• DRUGS, ALCOHOL, MEDICATION. Do not operate this tool while under the influenceof drugs, alcohol, or any medication.

• POLARIZED PLUGS. To reduce the risk of electric shock, this tool has a polarized plug (one blade is

wider than the other). This plug will fit in a polar-

ized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it stilldoes

not fit, contact a qualified electricianto install the

proper outlet. Do not change the plug in any way.

• WHEN SERVICING USE ONLY IDENTICAL

REPLACEMENT PARTS.

• SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instructothers who may use this tool. If you loan someone this tool, loan them these instructionsalso.

SAVE THESEINSTRUCTIONS

Chuck

Chuck Capacity

Horsepower

1/2 in.

5/64 in. to 1/2 in.

1/3

Input

Rating

No Load Speed

3.0 Amperes

120 volts, 60 Hz, AC only

600 RPM

Your drill has been shipped completely assembled except for the auxiliary handle. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Sears Retail Store to obtain replacement parts before attempting to operate drill.

The auxiliary handle and this owner's manual are included in the box.

_1, WARNING: If any parts are missing, do not

operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

The followingrecommended accessories are currentlyavailable at S.ears Retail Stores.

•

•

•

•

•

High Speed Bits (For wood or metal)

Masonry Bits

Wood Boring Bits

Hole Saws

Chuck

1/2 in. Max.

3/4 in. Max.

1ol/2 in. Max.

2-1/2in. Max.

Item No. _ 2980

,_ WARNING: The use of attachments or accessoriesnot listed might be hazardous.

KNOWYOURELECTRICDRILL

See Figure 1.

Before attempting to use any tool, familiarize yourself

with all operating features and safety requirements.

ELECTRICAL CONNECTION

Your drill has a precision builtelectric motor. It should be connected to a power supply that is 120 volts,

60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your drilldoes not operate when

plugged intoan outlet, double-check the power supply.

AUXILIARY HANDLE

An auxiliary handle has been packed with your drillfor

ease of operation and to help prevent loss of control.

_1, WARNING: Do not allowfamiliarity with tools to make you careless. Remember that a careless fraction of a second is sufficientto inflictsevere injury.

AUXILIARY

HANDLE

CHUCK

TO

STORE

CHUCKKEY

LOCK-ON

SWITCH

TRIGGER

TO

REMOVE

Fig. 1

6

WARNING:Yourdrillshouldneverbe topowersupplywhenyouare use.Disconnecting

accidental parts,making orremoving yourdrillwillprevent startingthatcouldcauseserious

SINGLESPEEDSWITCH

See Figure 2.

Your drill has a single speed switch. To turn your drill

ON, depress the switch trigger. Release switchtrigger to turn your drill OFF.

SWITCH

TRIGGER

Fig. 2

LOCK-ON BUTFON

See Figure 2.

Your drill is equipped with a lock-on feature, which is convenient when continuousdrillingfor extended periodsof time is required.To lock-on, depress the switch trigger, push in and hold the lock-on button locatedon the side of the handle, then release switch trigger. Release lock-on button and your drillwill continue running.

To release the lock, depress the switch trigger and release.

If you have the lock-on feature engaged during use

and your drill becomes disconnectedfrom power

supply, disengage the lock-on feature immediately.

LOCK-ON

BUTTON

_lb WARNING: Before connecting yourdrill to power supply source, always check to be sure it is not in lock-on position(depress and release switch trigger). Failure to do so could resultin accidental starting of your drillresultingin possibleserious injury. Also, do not lock the trigger on jobs where your drill may need to be stopped suddenly.

REVERSIBLE

See Figure 3.

Your electricddll has the feature of being reversible.

The directionof chuck rotationis controlledby a lever located above the switchtrigger. With your drillheld in normal operating position,the directionof rotationlever should be positionedto the left of the switch for drilling.

The drilldirectionis reversedwhen the lever is to the rightof the switch.

The design of the switchwill not permit changingthe direction of rotationwhile the drill is running. Release

the switch triggerand allow the drill to stop before changing its direction.

Note: Your drill will not run unlessthe switch lever is pushed fully to the left or right.

FORWARD

REVERSELEVER

Fig. 3

7

See Figure 4.

An auxiliaryhandle is packed with your drillfor ease of operation and to help prevent loss of control.To

install,start the screw threads into the threaded hole in the gear housingand tighten securely.

Note: For convenience, the screw has been trapped inside the auxiliary handle.

To prevent thread damage and possibleloss of

control,auxiliary handle should be checked pedodi- canyfor tightness. Do not operate ddll with auxiliary handle loose.

CHUCK KEY

See Figure 5.

A chuck key has been provided for use when installingor removing bits.

CHUCK KEY STORAGE

See Figure 5.

When not in use, the chuck key can be placed in the storage area located on the bottomportionof the handle of your drill as shown in figure 1.

TO

STORE

CHUCKKEY

AUXlUARY

GEAR

HOU_NG

TO

REMOVE

Fig. 5

Fig. 4

8

TOINSTALLBITS

See Figure 6.

DRILLSIT CHUCK

_l, WARNING: Do not insert drillbit intochuck jaws and tighten as shown in figure 7. This could cause driftbit to be thrown from your drill resultingin possibleserious personal injuryor damage to your chuck.

CHUCK

JAWS

RIGHT

Fig. 6

• Unplug your drill.

_k WARNING: Failure to unplug your drift could result in accidental starting causing serious injury.

• Open or close the chuck jaws to a point where the opening is slightlylarger than the drillbit you intendto use. Also, raise the frontof your drill slightlyto keep the drillbit from falling out of the chuck jaws.

• insert drill bit into chuck the full length of the jaws.

• Tighten the chuck jaws securely using the chuck key provided.

Fig. 7

REMOVING BITS

• Unplug your drill.

,_ WARNING: Failure to unplugyour drillcould result in accidental startingcausing serious injury.

• Loosen the chuck jaws usingthe chuck key provialed.

• Do not use a wrench to tighten or loosen the chuck jaws.

• Remove drillbit from chuck jaws.

DRILLING

See Figure8.

/

Fig.

• Depressand release the switch tdgger to be sure your ddll is in off position before connectingit to power supply.

• Check the directionof rotationlever for correct setting(forward or reverse). See Figure 3.

• Secure the materialto be drilled in a vise or with

clamps to keep it from turningas the drillbit rotates.

• Plug your drill into power supply source.

• Hold your drill firmly and place the bit at the point to be drilled.

• Depress the switch trigger to start your drill. Do not

lock the switchon for jobs where your drillmay need to be stopped suddenly.

• Move the drillbit intoworkpiece applyingonly enough pressure to keep the bit cutting.Do not force your drillor apply side pressure to elongate a hole. Let your drilland bit do the work.

When drilling hard, smooth surfaces use a center

punch to mark desired hole location.This will prevent

the drill bitfrom slippingoff center as the hole is started.

,_ WARNING: Be prepared for bindingor bit breakthrough.When these situationsoccur, ddll has a tendency to grab and kick oppositeto the directionof rotationand could cause loss of controlwhen breaking through material If not prepared, this loss of controlcan result in possibleserious injury.

When drillingmetals, use a light oil on the drillbit to

keep it from overheating.The oil will prolongthe life of the bit and increase the drillingaction.

If the bit jams in workpiece or if the drillstalls, stop the

tool immediately. Remove the bit from the workpiece

and determine the reason for jamming.

10

CHUCKREMOVAL

See Figures 9, 10, and 1 I.

The chuck must be removed in order to use some accessories. To remove:

• Unplug your drill.

_k WARNING: Failure to unplug your drillcould result in accidental starting causing serious injury.

• Open chuckjaws. Insert a 5/16 inch or larger hex key wrench (allen wrench) into the chuck of your drill and

tightenthe chuckjaws securely.

• Tap the hex key wrench sharply with a mallet in a clockwisedirection.See Figure 9. This will loosen

the screw in the chuck for easy removal.

MALLET

• Insert hex key wrench in chuck and tighten chuck

jaws securely. Tap sharply with a mallet in a countemlockwisedirection.This will loosen chuck on the spindle. It can now be unscrewed by hand.

See Figure 11.

CHUCK

HEXKEY

WRENCH

Fig. 9

• Open chuck jaws and remove hex key wrench.

Remove the chuck screw by turning it in a clockwise direction.See Figure 10.

Note: The screw has left hand threads.

Fig. 11

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on spindleand develop a wobble. Also, the chuck screw may become loose

causing the chuck jaws to bind and preventthem from

closing. To tighten, follow these steps:

• Unplug your drill.

_k WARNING: injury.

Failure to unplug your drillcould result in accidental starting causing serious

• Insert hex key wrench into chuck and tighten chuck jaws securely. Tap hex key wrench sharply with a mallet in a clockwisedirection.This willtighten chuck on the spindle.

• Open the chuck jaws and remove hex key wrench.

• Tighten the chuck screw.

Note: The chuck screw has left hand threads.

Fig. 10

11

_k WARNING: replacement pads. Use of any other part may create a hazard or cause productdamage.

GENERAL

When servicing, use only identical

Only the parts shown on parts list, page 13, are

intendedto be repaired or replaced by the customer.

All other parts represent an importantpart of the double insulationsystem and should be serviced only by a qualified Sears service technician.

Avoid using solventswhen cleaning plasticpads.

Most plasticsare susceptibleto damage from various types of commercial solventsand may be damaged by their use. Use clean clothsto remove dirt, carbon dust, etc.

LUBRICATION

All of the bearings in this tool are lubricatedwith a sufficientamount of high grade lubricantfor the life of the unit under normal operating conditions.Therefore, no further lubricationis required.

EXTENSION CORDS

The use of any extension cord will cause some loss of power. To keep the loss to a minimum and to prevent tool overheating, use an extension cord that is heavy enough to carry the current the tool will drew.

A wire gage size (A.W.G.) of at least 16 is

recommendedfor an extension cord tO0 feet or less in length. When workingoutdoors,use an extension cord that is suitable for outdooruse. The cord's jacket will be marked WA.

,_ WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contactwith plastic parts. They contain chemicalsthat can damage, weaken or destroyplastic.

It has been found that electrictools are subject to accelerated wear and possiblepremature failure when they are used on fiberglassboats, sports cars, wallboard,spackling compounds,or plaster. The

chips and grindingsfrom these materialsare highly abrasive to electdc tool parts such as bearings, brushes, commutators,etc. Consequently, it is not recommended that this tool be used for extended work on any fiberglass material, wallboard, spackling compounds,or plaster. During any use on these materials it is extremely importantthat the tool is cleaned frequently by blowingwith an air jet.

_, WARNING: Always wear safety gogglesor safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

_k CAUTION: Keep extension cordsaway from the ddllingarea and positionthe cord so that it will

not get caught on lumber, tools, etc., dudng ddllingoperation.

WARNING: Check extension cords before each use. If damaged, replace immediately.Never use tool with a damaged cord since touchingthe damaged area could cause electrical shock resulting in serious injury.

Extensioncords suitablefor usewithyourdrillareavailable at your nearest Sears Retail Store.

12

COMPANION 112 in. ELECTRIC DRILL - MODEL NO. 315.101000

I

I The model numberwillbe found on a plate attachedto the motorhousing.Always mention the model |

J

SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS

5

6

KEY

NO.

3

4

1

2

5

6

PART

NUMBER

972895-002

613150-003

973869-001

981179-001

981181-001

606858-001

972000-630

PARTS LIST

DESCRIPTION QUAN.

AuxiliaryHandle ................................................................................

1

* Screw (5/16-24 x 7/8 in. Fil. Hd, Left Hand) ...................................... 1

1/2 in, Chuck .....................................................................................

1

Data Plate ..........................................................................................

1

Logo Plate .........................................................................................

1

Chuck Key .........................................................................................

1

Owner's Manual

NOTE "A": The assembly shown represents an important part of the double Insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest Sears Repair Center. Contact your nearest Sears Retail Store for Service Center information.

* Standard Hardware Item -- May Be Purchased Locally

13

For in-home major brand repair service:

Call 24 hours a day, 7 days a week

1-800-4-MY-HOME s" (1-800-469-4663)

Para pedir servicio de reparacibn a domicilio - 1-800-676-5811

In Canada for all your service and parts needs call - 1-800-665-4455

Au Canada pour tout le service ou les pi_ces

For the repair or replacement parts you need:

Call 6 am - 11 pm CST, 7 days a week

PartsDirects.

1-800-366-PART (1-800-366-7278)

Para ordenar piezas con entrega a domicilio - 1-800-659-7084

For the location of a Sears Parts and Repair Center in your area:

Call 24 hours a day, 7 days a week

1-800-488-1222

For information on purchasing a Sears Maintenance Agreement or to inquire about an existing Agreement: :

Call 9 am - 5 pm, Monday - Saturday

1-800-827-6655

The Service Side of Sears