VT596(F)/KP USER MANUAL(EN)

4 Wire Video Intercom System

VT596/KP VT596F/KP

 Read this manual carefully before using the product, and keep it well for future use.

-1-

1. Parts and Functions

1 2 3

4 5 6

7

*

8 9

0 #

Camera Lens

Speaker

Indicator(red)

Indicator(blue)

Touch Sensitive

Digital Keypad

Nameplate

Call Button

Microphone

VT596/KP

1 2 3

4 5 6

7

*

8 9

0 #

VT596F/KP

Camera Lens

Speaker

Indicator(red)

Indicator(blue)

Touch Sensitive

Digital Keypad

Nameplate

Call Button

Screws for panel mounting

Microphone

1 2 3

4 5 6

7

*

8 9

0 #

90 mm

2. Terminal Descriptions

1 2 3

4 5 6

7

*

8 9

0 #

119 mm

28 mm

Side View

Rainy Cover

Mounting box

MIC adjustment

SPK adjustment

JP/LK

Lock Control Jumper

RS485 Connect Port

DIP Switches

Main Connect Port

•• JP/LK(Lock Control Jumper): To•select•the•lock•type:•see•section•4(lock•connect)

•• DIP Switches: Reserve.

•• RS485: Used•to•update•the•program

•• MIC :•Adjust•the•volume•of•Microphone

•• SPK :•Adjust•the•volume•of•Speaker

•• Main Connect Port: •To•connect•the•bus•line•and•the•electronic•locks.

•• DC+,DC-:•Power•supply•connection•port,16~24V,•polarity.

•• 1R:•Power•positive.•+12V•present•when•outdoor•station•calling•or•being•monitored.

•• 2W:•Power•negative•(GND)

•• 3Y:•Image•signal•(Video•signal)

•• 4B:•Talk•and•control•signal•(Audio•signal)

•• PL:•External•lock•power•input,•connect•to•the•power•positive(power•+).

•• S+:•Lock•power(+)•output.

•• S-:•Lock•power(-)•output.

3. Door Station Mounting

VT596/KP Mounting

1 2 adjust camera angle

4 core cable

PS

Drill holes in the wall to match the size of screws and attach the rainy cover to the wall.

3 4

Connect the cable correctly and adjust right angle for camera

-2-

Attach the panel to the rainy cover Use the screwdriver and the screw to fix the panel

-3-

VT596F/KP Mounting

1

90mm

52mm

4 core cable

PS

2 adjust camera angle

Drill a hole in the wall to match the size of the mounting box and attach to the wall.

3 4

Connect the cable correctly and adjust right angle for camera

Attach the panel to the mounting box and use screws supplied to fix the panel

Placing Name Label

Place name label

1 2 3

4 5 6

7

*

8 9

0 #

Press•the•plastic•cover•on•right/left•side• to•move•away•the•cover,•insert•a•name• paper,•then•put•the•plastic•cover•back•to• the•panel.•

-4-

4. System Wiring and Electric Lock Connection

Basic Connection

AC ~

*

1 2 3

4 5 6

7 8 9

0 #

TO Monitor

JS/OS1

3Y 4B

Shielding Layer of the RVVP Cable

3Y 4B

Electric Lock Connection

•• Mode1:Door•Lock•Controlled•With•Dry•Contact

Must•install•external•power•supply•for•lock,and•nearly•all•kinds•of•electronic•lock•can•be•used.Incidentally,in• this•mode,you•can•continue•talking•and•monitoring•during•unlock•operation.

AC ~

VT596(F)

POWER

SUPPLY

+

-

Black Red

Connect to Monitor

+

-

LOCK

Take off JP/LK Jumper

Note:•

1.The•external•power•supply•must•be•used•according• to•the•lock.

2.The•inside•relay•contact•is•restricted•to•AC•or•DC•

24V/1A.

3.The•jumper•must•be•taken•off•before•connecting.

4.Setup•the•Unlock•Mode•on•door•station•for•different• lock•types.

•• Power-on-to-unlock•type:Unlock•Mode=0•

•• Power-off-to-unlock•type:Unlock•Mode=1

-5-

•• Mode2:Door•Lock•Controlled•With•Internal•Power

The•lock•can•be•directly•connected•with•the•door•station•and•the•power•through•monitor.During•unlock• operation,the•monitor•will•close•screen•automatically.

AC ~

VT596(F)

Connect to Monitor

1 2 3

JP/LK Jumper position in 2-3

Unlock mode:0

-

+

LOCK

Note:

1.Electronic•lock•of•power-on-to-unlock•shoule•be• used.

2.The•door•lock•is•limited•to•12V,and•holding•current• must•be•less•than•250mA

3.The•door•lock•control•is•not•timed•from•Exit•

Button(EB).

4.•The•Unlock•Mode•Parameter•of•Monitor•must•be• set•to•0•(by•default).

5. Functions Setting Up

This•section•explains•the•settings•of•each•function,please•refer•to•the•following•table:

About•the•setting•mode:

Input•the•master•code•to•switch•to•the•setting•mode,•and•input•the•corresponding•setting•code•to•perform• the•settings•for•the•function•you•want.•After•settings•have•been•made,•input•the•following•setting•codes•to• continue•the•setting•operation.•Press•"• •"•to•exit•the•setting•mode.

 •• The•example•is•set• •as•cancel•button•and•#•as•confirm•button,please•refer•to•

*/#•function•setting•for•detail•information.

•• Forbid•to•slide•to•touch•the•digital•keypad,it•may•cause•mistaken•key,the• correct•operation•is•using•your•finger•to•press••the•digital•you•desired.

•• You•should•press“confirm”button•after•finish•inputting•the•code•number•each• time,otherwise,the•operation•will•be•canceled•automatically•in•10s.

-6-

5

8

9

6

7

3

4

10

11

12

13

Order

1

2

14

Setting items Setting range

Reset•all•settings 1234

Setting•the•master•code

Setting•the•key illumination•time

1•~•12•digits

Valid•keys:0•~•9

10•to•99•seconds/ continually•lit(00s)

Setting•the•unlock•time 01•to•99•seconds

Setting•the•unlock• mode

Operation•tone•settings

•0:opened/1:closed

0:on/1:off

Reset•code•settings 1234

&#•function•settings 0:Normal/1:Reverse

Reserve

Interference•resistant•• grade•settings

Reserve

Setting•the•code• forTemporary1

Setting•the•code• forTemporary2•

Setting•the•code•for• user

Reserve

Valid•keys:0•~•5

Reserve

1•~•12•digits

Valid•keys:0~9

1•~•12•digits

Valid•keys:0~9

1•~•12•digits

Number•of•codes:80

Valid•keys:0~9

Default value Setting code

00

1234 01

10•seconds

1•seconds opened on

-

Normal

Reserve

2

Reserve

-

-

04

07

08

05

06

02

03

09

10~17

18

19

20~99

About Functions Setting steps

red blue

1 2 3

4 5 6

7

*

8 9

0 #

Each•operation•is•indicated•by•the•lighting•up•of•the•LED• indicators•on•the•right•section•of•the•unit,•and•by•the• sounding•of•the•buzzer.

-7-

Setting items

1.Reset all settings

Step 1

Input the master code.

(Default: [ ] +[#] )

2.Setting the master code

(Default 1234)

Step 1

3.Setting the key

illumination time

(Default 10s)

Step 1

(red)

ON

(blue)

OFF

4.Setting the

unlock time

(Default 1s)

Step 1

Beep+, Beep

Step 2

Input the setting code.

00+#

Step 2

Input the setting code.

01+#

Step 2

Input the setting code.

02+#

Step 2

Input the setting code.

03+#

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

Step 3

Inputting of code

(red)

ON

1234+#

(blue)

OFF

Beep+

Step 3

Inputting of new master code

(ex.: 4321)(1~12 digits)

4321+#

(red)

ON

(blue)

OFF

Beep+

Step 3

Inputting of code (ex.: 10) range:00 or 10~99

10+#

(red)

ON

(blue)

OFF

Beep+

Step 3

Inputting of code (ex.: 09) range:01~99

09+#

(red)

ON

(blue)

OFF

Beep+

- When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode

(red)

OFF

(blue)

OFF

Beep, Beep+

- All settings will restore to their default value.

- When power on or activate the reset all setting item,the keypad checking will carry out, during this time,the key illumination will blink and the touching operation is forbidden, after finish checking,the key illumination will stop blinking and sent out a long sound of beep

- The master code is allowed 1~12 digits,the same code cannot be set for both the user code and the master code,it is recommended that you modify the default master code.

- If the key illumination time is set to 00,the key illumination will light up all the time when power on.

- If the key illumination time is set to

10~99,the key illumination will light up for 10~99 seconds.At this mode, the key illumination lights off in standby mode, touching any digital key can illuminate,but this is the invalid digital.

- The unlock time is the time that use keypad access to unlock.

-8-

Setting items

5.Setting the unlock mode

(Default 0(opened))

6.Setting operation tone

(Default ON)

7.Reset code setting

(Default Normal)

Step 1

Input the master code.

(Default: [ ] +[#])

Step 2

Input the setting code.

04+#

(red)

ON

(blue)

ON

Beep+, Beep

Step 1

Step 2

Input the setting code.

05+#

(red)

ON

(blue)

ON

Beep+, Beep

Step 1

(red)

ON

(blue)

OFF

Step 1

Beep+, Beep

Step 2

Input the setting code.

06+#

Step 2

Input the setting code.

07+#

(red)

ON

(blue)

ON

Beep+, Beep

(red)

ON

(blue)

ON

Beep+, Beep

Step 3

Inputting of code

(ex.: 1) range:0:(open)/1:(close)

1+#

0/1

(red)

ON

(blue)

OFF

Beep+

Step 3 0/1

Inputting of code range:0:(on)/1:(off)

(ex.: 1)

1+#

(red)

ON

(blue)

OFF

Beep+

Step 3

Inputting of code

1234+#

(red)

ON

Beep+

Step 3 0/1

Inputting of code

(ex.: 1) range:0:(normal)/1:(reverse)

1+#

(red)

ON

(blue)

OFF

Beep+

- When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode

(red)

OFF

(blue)

OFF

Beep, Beep+

- The unlock mode is used to match the type of lock,If it’s set to 0,unlock mode is power-on-to unlock,and must use electric lock.

If it’s set to 1,unlock mode is power-off-to-unlock,and must use electromagnetic lock.

- When the operation tone is set to 0,pressing the digital keypad will sent out a sound of beep.

- When the operation tone is set to 1,pressing the digital keypad will blink one time.

- Cancel all the passwords except the master code.

- Restore the master code to default value(1,2,3,4)

- When the item is set to 0,press

* the input.

- When the item is set to 1,press the # button to cancel the input, and press the button to confirm the input .

*

-9-

Setting items

10.Interference resistant

grade setting

(Default 2)

12.Setting the code

forTemporary1

Step 1

Input the master code.

(Default: [ ]+[#] )

Step 1

13.Setting the code

forTemporary2

Step 1

(red)

ON

(blue)

OFF

14.Setting the code

for user

Step 1

Beep+, Beep

Step 2

Input the setting code.

09+#

(blue)

ON

Beep+, Beep

Step 2

Input the setting code.

(red)

ON

18+#

Beep+, Beep

Step 2

Input the setting code.

(red)

ON

19+#

Beep+, Beep

Step 2 20~99

Input the setting code.

(ex.:21)

21+#

(red)

ON

Beep+, Beep

Step 3

Inputting of code (ex.: 3) range:0~5

3+#

(blue)

OFF

Beep+

Step 3

Inputting of code (ex.: 1006)

1~12 digits

1006+#

(red)

ON

(blue)

OFF

Beep+

Step 3

Inputting of code (ex.: 2011)

1~12 digits

2011+#

(red)

ON

(blue)

OFF

Beep+

Step 3

Inputting of code (ex.: 2011)

1~12 digits

2011+#

(red)

ON

(blue)

OFF

Beep+

- When there isn’t any operation in 10s, the LED lights off, the buzzer beeps, and the system exits the setting mode

(red)

OFF

(blue)

OFF

Beep, Beep+

- The larger you set the interference resistant grade,the stronger it will be, but the sensitivity of the keypad will be more lower.

- The interference resistant grade setting also will activatethe keypad checking.

- When input the correct temporary password to release the door, the system will clear the temporary password after 60 seconds automatically.But you should know that the password is valid within

60 seconds after inputing the correct temporary password

- If the password length exceeds 12 digits, the system will sent out the sound of “beep,beep,beep,beep”,and the digitals you input before will be cleared at the same time.

- The temporary code can not be set the same as the master code and user code.

- The user code is used to release the lock,80 group passwords can be supported.

- If the password length exceeds

12 digits, the system will sent out the sound of “beep,beep,beep,beep”, and the digitals you input before will be cleared at the same time.

- The user code can not be set the same as the master code and temporary code.

-10-

6. Unlock Operations

Unlocking of user code

When•the•registered•user•code•has•been•input•using•the•keypad•(1~12•digits),•the•LED•indicator•(red)•lights• up,•the•buzzer•sounds,and•the•electric•door•strike•is•unlocked.(note•that•you•should•press•"#"•button(if•"#"• button•is•set•to•confirm•button)•after•input•the•unlock•code)

Example:•

Unlock code=2011

Red LED lights up

(during relay1 operation)

(red)

ON

(blue)

OFF

Beep+

•• The•time•interval•during•which•the•button•must•be•pressed•is•approximately•10•seconds.•If• the•time•interval•exceeds•approximately•10•seconds,•the•input•value•will•be•cleared.

•• If•you•make•a•mistake•when•inputting•the•user•code,press•the"•cancel"•button•and•input•the• user•code•again.

•• If•10•times•incorrect•access•codes•are•continuously•attempted,•the•release•function•is• forbidden•and•the•input•operation•is•disabled•for•60•seconds•.•During•this•time,the•buzzer•will• continuously•sound•about•8•times.

•• You•can•activate•the•electric•door•strike•by•pressing•the•request•to•exit•button•connected•to• the•unit.•(The•unlock•function•will•work•when•the•request•to•exit•button•is•pushed,•even•while• the•keypad•operating•is•forbidden.)

 1.•During•calling,pressing•"cancel"•button•can•cancel•the•calling

2.•If•input•the•incorrect•access•code,the•buzzer•will•sound•of•beep,beep,beep

-11-

7. Precaustions

•• Please•clean•the•unit•with•soft•cotton•cloth,•don't•use•the•organic•impregnant•or•chemical• clean•agent.•If•necessary,•please•use•a•little•pure•water•or•dilute•soap•water•to•clean•the•dust.

•• The•unit•is•weather•resistant.•However•do•not•spray•high•pressure•water•on•access•control• keypad•directly.•Excessive•moisture•may•cause•problems•with•the•unit.

•• You•must•use•the•right•adaptor•which•is•supplied•by•the•manufacture•or•approved•by•the• manufacture..

•• Pay•attention•to•the•high•voltage•inside•the•products,•please•refer•service•only•to•a•trained• and•qualified•professional.

8. Specifications

•• Power•Supply•:•••

•• Power•Consumption:•• •

•• Camera:••

•• Unlocking•time:••

•

•• Lock•Power•supply:•• •

•• Mounting:• •

•

•

•

•

• 12Vdc,•300mA(Internal•Power);

••••••••••••••••Surface•mounting(DT596/KP)••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••••••••••••Flush•mounting•(DT596F/KP)•••••••••••••••

•• Working•temperature:• •

•• Dimension:• • •

•

•

•

•

•

•

DC•16~20V•

Standby•0.5W;•Working•status•3W;

Pinhole•Sharp•Color•CCD;

1~99s

•-10ºC•~•+45ºC

176(H)×90(W)×28(D)mm(DT596/KP)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••220(H)×119(W)×52(D)mm(DT596F/KP)

The•design•and•specifications•can•be•modified•without•notice•to•the•user.•Right•to•interpret•and•copyright•of•this•manual•are•preserved.

Printed•In•China•/•2011.•09