advertisement
Total Solutions for Industrial Device Networking
EDS-828 Series
24+4G-port Layer 3 Gigabit modular managed Ethernet switch
Layer 3 routing interconnects multiple LAN segments
Static routing and RIP V1/V2 supported
4 Gigabit plus 24 fast Ethernet ports for copper and fiber
Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D) for Ethernet
› redundancy
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3,
RMON supported
›
IEEE 802.1X, HTTPS, and SSH to enhance network security
Introduction
The EDS-828 is a high-performance Layer 3 Ethernet switch designed for network routing, and the improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers, offering better performance, and making the switch ideal for largescale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports Layer 2 management features, including
Features and Benefits
• Static routing and RIP V1/V2 to move data and information across networks
• Redundant Gigabit Turbo Ring and RSTP/STP (IEEE 802.1w/D)
• IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
• IEEE 802.1Q VLAN and GVRP protocol to ease network planning
• QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
• Port Trunking for optimum bandwidth utilization
• IEEE 802.1X, HTTPS, and SSH to enhance network security
• SNMPv1/v2c/v3 for different levels of network management
• RMON for efficient network monitoring and proactive capability
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMPv1/v2c/v3, RMON,
IEEE 802.1X, HTTPS, and SSH. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion.
• Bandwidth management prevents unpredictable network status
• Lock port function for blocking unauthorized access based on MAC address
• Port mirroring for online debugging
• Automatic warning by exception through e-mail, relay output
• Digital inputs for integrating sensors and alarms with IP networks
• Redundant, dual DC power inputs
• IP30, rugged high-strength case
• DIN-Rail or panel mounting capability
• Configurable by Web browser, Telnet/Serial console, Windows utility, and ABC-01 automatic backup configurator
Specifications
Layer 3 Modular Managed Ethernet Switch System, EDS-82810G
Technology
IEEE 802.1w for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog
MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB,
RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Standards: IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256 email: [email protected] www.moxa.com 1-7
Modular Managed Ethernet Switches
Interface
Fast Ethernet: 6 slots for any combination of 4-port interface module with
10/100BaseT(X) or 100BaseFX
Gigabit Ethernet: 2 slots for any combination of 2-port interface module with 10/100/1000BaseT(X) or 1000BaseSFP slot
Console: RS-232 (RJ45)
System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER, COUPLER,
T.RING
Module LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT,
SPEED
Alarm Contact: Two relay outputs with current carrying capacity of 1A @ 24
VDC
Digital Inputs: Two inputs with the same ground, but electrically isolated from the electronics.
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
Power Requirements
Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current (@ 24 V): 0.96A
Connection: Two removable 6-pin terminal blocks
Overload Current Protection: Present
Reverse Polarity Protection: Present
Physical Characteristics
Casing: IP30 protection
Dimensions (W x H x D): 362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)
Weight: 1950 g
Installation: DIN-Rail mounting, wall mounting (optional kit)
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
(Pending)
Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and D
(Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)
Maritime: DNV (Pending), GL (Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
MTBF: 160,000 hrs
Database: Telcordia (Bellcore), GB
*Please check Moxa’s website for the most up-to-date certification status.
Warranty
5 years (see www.moxa.com/warranty for details)
Dimensions (unit = mm)
Side View Front View Rear View
Ordering Information
Step 1: Select Ethernet switch system
EDS-82810G
Step 2: Select interface modules
IM series
(Gigabit or fast Ethernet)
* The EDS-82810G switch system is delivered without interface module.
Please see page 1-11 for product information of IM series Gigabit and fast
Ethernet interface modules.
Layer 3 Modular Managed Ethernet Switch System, EDS-82810G
Layer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports.
Optional Accessories
• ABC-01: Industrial RS-232, RJ45-based, automatic backup configurator
• EDS-SNMP OPC Server Pro: CD with EDS-SNMP OPC server software and manual
• DR-4524: 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input
• DR-75-24: 75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input
• DR-120-24: 120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switch
• WK-32: Wall mounting kit for EDS-828/728 series
• RK-4U: 4U-high 19” rack mounting kit
Total Solutions for Industrial Device Networking
IM Series
2-port Gigabit Ethernet and 4-port fast Ethernet interface modules for
EDS-828/728 series Ethernet switches
Specifications
Gigabit Ethernet Interface Modules, IM-2G Series
IM-2GTX IM-2GSFP
Interface
LED Indicators: Port status
RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed and auto
MDI/MDI-X connection
Fast Ethernet Interface Modules, IM Series
Fiber Ports: 1000BaseSFP slot
* Please see page 2-23 for the product information of SFP-1G series Gigabit
Ethernet SFP modules.
Power Requirements
Power Consumption: IM-2GTX: 2.96W
IM-2GSFP: 3.042W
Physical Characteristics
Dimensions (W x H x D): 24 x 65.9 x 101.1 mm (0.94 x 2.59 x 3.98 in.)
Weight: IM-2GTX: 150 g
IM-2GSFP: 148 g
IM-4TX IM-2MSC/2TX
IM-2SSC/2TX
IM-2MST/2TX
Interface
LED Indicators: PWR, P1, P2, P3, P4 port status
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST connector)
Optical Fiber
100BaseFX
Multi Mode
Power Requirements
Power Consumption:
IM-4TX: 2.5W
IM-2MSC/2TX: 5W
Single Mode
Wavelength
Max. TX
Min. TX
RX Sensitivity
1300 nm
-10 dBm
-20 dBm
-32 dBm
1310 nm
0 dBm
-5 dBm
-34 dBm
Link Budget
Typical Distance
12 dB
5 km a
4 km b
29 dB
40 km c
Saturation -6 dBm -3 dBm a. 50/125 μm, 800 MHz*km fiber optic cable b. 62.5/125 μm, 500 MHz*km fiber optic cable c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable d. 9/125 μm, 19 PS/(nm*km) fiber optic cable
Single Mode,
80 km
1550 nm
0 dBm
-5 dBm
-34 dBm
29 dB
80 km d
-3 dBm
IM-1LSC/3TX IM-4MSC
IM-4SSC
IM-4MST
IM-2MST/2TX: 5W
IM-2SSC/2TX: 5W
IM-1LSC/3TX: 4W
IM-4MSC: 7.2W
IM-4MST: 7.2W
IM-4SSC: 7.2W
Physical Characteristics
Casing: IP30 protection
Dimensions (W x H x D): 40 x 127.8 x 100 mm (1.57 x 5.03 x 3.94 in.)
Weight (Gross Weight):
IM-4TX: 215 g
IM-2MSC/2TX: 245 g
IM-2MST/2TX: 250 g
IM-2SSC/2TX: 245 g
IM-1LSC/3TX: 235 g
IM-4MSC: 250 g
IM-4MST: 270 g
IM-4SSC: 270 g
MTBF
620,000 hrs
Database: MIL-HDBK-217F, GB 25˚C email: [email protected] www.moxa.com
Modular Managed Ethernet Switches
Dimensions (unit = mm)
Gigabit Ethernet Interface Modules Fast Ethernet Interface Modules
Front View Side View Front View Side View Rear View
Ordering Information
Port Interface
Product Model
Gigabit Ethernet
10/100/1000BaseT(X) 1000BaseSFP* 10/100BaseT(X) Multi Mode,
SC Connector
Fast Ethernet
100BaseFX
Multi Mode,
ST Connector
Single Mode,
SC Connector
IM-2G Series
IM-2GTX 2
IM-2GSFP
IM Series
IM-4TX
IM-4MSC
2
4
4
IM-4MST
IM-2MSC/2TX
IM-2MST/2TX
IM-4SSC
2
2
2
4
2
4
IM-2SSC/2TX
IM-1LSC/3TX
2
3
2
* IM-2GSFP supports 2 1000BaseSFP slots. Please see page 2-23 for the product information of SFP-1G series Gigabit Ethernet SFP modules.
Single Mode,
SC Connector,
80 km
1 www.moxa.com email: [email protected]
Total Solutions for Industrial Device Networking
SFP-1G Series
1G-port Gigabit Ethernet SFP modules
Compliant with IEEE 802.3z
Differential LVPECL inputs and outputs
Single power supply 3.3V
TTL signal detect indicator
Hot Pluggable
Class 1 laser product, complies with EN60825-1
EN : 60825
Specifications
Interface
Gigabit Port: 1 port
Connector: Duplex LC Connector or
Simplex LC Connector* (WDM-type only)
* WDM-type SFP modules must be used in pairs (e.g., SFP-1GXXALC and SFP-
1GXXBLC)
Optical Fiber
Gigabit Ethernet
Wavelength
Max. TX
Min. TX
RX Sensitivity
Link Budget
Typical Distance
Saturation
SFP-SX
850 nm
-4 dBm
-9.5 dBm
-18 dBm
8.5 dB
550 m a
275 m b
0 dBm
SFP-LX
1310 nm
-3 dBm
-9.5 dBm
-20 dBm
10.5 dB
1100 m c
550 m d
10 km e
-3 dBm
SFP-LHX
1310 nm
1 dBm
-4 dBm
-24 dBm
20 dB
40 km e
-3 dBm
SFP-ZX
1550 nm
5 dBm
0 dBm
24 dBm
24 dB
80 km f
-3 dBm
Wave length
Max. TX
Min. TX
RX
Sensitivity
Link
Budget
Typical
Distance
Saturation
Gigabit Ethernet
SFP-10A SFP-10B SFP-20A SFP-20B SFP-40A SFP-40B
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
-3 dBm
-9 dBm
-2 dBm
-8 dBm
2 dBm
-3 dBm
-21 dBm
12 dB
10 km ef
-1 dBm
-23 dBm
15 dB
20 km ef
-1 dBm
-23 dBm
20 dB
40 km ef
-1 dBm a. 50/125 μm, 400 MHz*km fiber optic cable b. 62.5/125 μm, 200 MHz*km fiber optic cable c. 50/125 μm, 800 MHz*km fiber optic cable d. 62.5/125 μm, 500 MHz*km fiber optic cable e. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable f. 9/125 μm, 19 PS/(nm*km) fiber optic cable
Environmental Limits
Operating Temperature: 0 to 60°C (32 to 140°F)
-40 to 85°C (-40 to 185°F) for T models
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL, TÜV, EN60825-1
Dimensions (unit = mm)
Top View
Side View
Rear View email: [email protected] www.moxa.com
Managed Ethernet Switches
Ordering Information
SFP Modules
Product Model
Standard Temperature
(0 to 60˚C)
Extended Temperature
(-40 to 85˚C)
SFP-1GSXLC
SFP-1GLXLC
SFP-1GSXLC-T*
SFP-1GLXLC-T
SFP-1GLHXLC SFP-1GLHXLC-T
SFP-1GZXLC SFP-1GZXLC-T
* SFP-1GSXLC-T: -20 to 75˚C operating temperature
1000BaseSX,
LC Connector,
0.5 km
1
Port Interface
1000BaseLX,
LC Connector,
10 km
1000BaseLHX,
LC Connector,
40 km
1
1
1000BaseZX,
LC Connector,
80 km
1
WDM-type (BiDi) SFP Modules
Product Model
Standard Temperature
(0 to 60˚C)
SFP-1G10ALC
SFP-1G10BLC
SFP-1G20ALC
SFP-1G20BLC
SFP-1G40ALC
SFP-1G40BLC
Extended Temperature
(-40 to 85˚C)
SFP-1G10ALC-T
SFP-1G10BLC-T
SFP-1G20ALC-T
SFP-1G20BLC-T
SFP-1G40ALC-T
SFP-1G40BLC-T
1000BaseSFP,
LC Connector, 10 km
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
1
1
Matched Products
• EDS-828/728 series: IM-2GSFP series Gigabit Ethernet interface module
• EDS-518A series: 16+2G-port Gigabit managed Ethernet switches
• EDS-510A series: 7+3G-port Gigabit managed Ethernet switches
• PT and IKS series: PM-7200-2G/4G series Gigabit Ethernet interface modules
• EDS-G308 series: 8G-port full Gigabit unmanaged Ethernet switches
• IMC-101G series: Industrial Gigabit media converters
Port Interface
1000BaseSFP,
LC Connector, 20 km
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
1
1
1000BaseSFP,
LC Connector, 40 km
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
1
1
www.moxa.com
email: [email protected]
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement