NuTone HLB6 Specification Sheet
Add to my manuals1 Pages
Broan HLB6 is a powerful yet quiet in-line blower designed for use with Broan Elite and NuTone Premier Hoods. It features a low RPM for quiet operation, resilient anti-vibration mounts, and dynamically-balanced blower wheels for efficient performance. The blower is permanently lubricated and thermally protected, and it comes with a plug-in motor rated at 120 VAC for continuous operation.
advertisement
SPECIFICATION SHEET
IN-LINE BLOWER
MODEL HLB6
For use with Broan Elite and NuTone Premier Hoods
.
Powerful yet quiet blower - exhausts the cooking area from a remote location.
FEATURES
BLOWER:
● Low RPM for quiet operation
●
●
●
Resilient anti-vibration mounts
Dynamically-balanced, galvanized steel, centrifugal blower wheels for quiet, efficient performance
Permanently lubricated, thermally protected motor
●
●
Plug-in motor rated at 120 VAC
Designed for continuous operation
HOUSING:
●
Rugged galvanized steel
●
●
●
●
●
8-position mounting brackets for easy installation and greater adaptability to various mounting requirements
Automatic backdraft damper located within exhaust duct connector
Factory-shipped in horizontal discharge position
May be converted to vertical discharge
Suitable for kitchen installations
ACCESSORIES INCLUDED:
● 4½-inch x 18½-inch integrated duct connectors
●
●
Two (2) 4½-inch x 18½-inch to 10-inch-round transitions
Hanger kit - for additional installation flexibility
SPECIFICATIONS
Volts Hz Amps CFM Duct Weight
120 60 2.9
600 (V) 4½”x18½” * 45.2 lbs.
600 (H)
* Performance ratings include the addition of a 10” round transition on inlet and outlet.
TYPICAL SPECIFICATION
In-Line Blower shall be Model HLB6.
Unit shall have galvanized steel housing. Housing to have adjustable mounting brackets.
Blower to include hanger kit, two (2) 4½-inch x 18½-inch to 10-inch-round transitions, and 4½-inch x 18½-inch integrated duct connectors.
Automatic backdraft damper to be located within exhaust duct connector. Duct connectors, blower assembly and wiring plate shall be adjustable for either horizontal or vertical installation.
Blower unit shall be removable from housing and will have galvanized steel, centrifugal-type blower wheels.
Motor to be permanently lubricated and mounted with resilient anti-vibration mounts.
Air delivery shall be no less than listed. All air ratings shall be certified by HVI. Unit to be UL and cUL listed.
4½” x 18½”
DUCT
CONNECTOR
REFERENCE
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
QTY.
REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by
50C
Date
99043707B
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project