Miele | NOVOTRONIC G 851 | Operating instructions | Miele NOVOTRONIC G 851 Operating instructions

Operating instructions
Novotronic
G 851 SC Plus
To prevent accidents
and machine damage,
read these instructions
before
installation or use.
UV
M.-Nr. 05 431 310
Contents
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SÉCURITÉ IMPORTANTES
Caring for the environment
Energy saving washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Guide to the dishwasher
Wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before using for the first time
To open the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
To close the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Child Safety Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Programming the water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Checking the programmed water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Salt indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adding rinse aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adjusting the dosage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Rinse aid indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Loading the dishwasher
Items not recommended for dishwashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cutlery tray (SC units) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjusting the upper basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Adjustable cup racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Coffee bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Lower basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Lower basket inserts
Removing an insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Inserting an insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Foldable spike insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
PlateGuard Plus insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Basket accessories
3
Contents
Operation
Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Running the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Program sequence indicator (14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
At the end of a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Interrupting a program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Changing a program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Additional features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
"Top Solo" (15). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Extended drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Frequently asked questions
After sales service
Transport
User Maintenance Instructions
Cleaning the filter in the wash cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Cleaning the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the door and door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Cleaning the drain pump and non-return valve . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
4
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
When using your dishwasher, follow
basic precautions, including the following:
Read all instructions before installation or use of the dishwasher to prevent injury and machine damage.
The manufacturer cannot be held responsible for damage or injury
caused by improper use of this appliance.
Use the dishwasher only for its intended purpose. This appliance is
intended for residential use only.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Electrical safety
Do not use an extension cord to
connect this appliance to electricity. Extension cords do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance, continuity must exist between the appliance
and an effective grounding system. It is
imperative that this basic safety requirement be met. If there is any doubt, have
the electrical system of the house
checked by a qualified electrician. The
manufacturer cannot be held responsible for damages caused by the lack, or
inadequacy of, an effective grounding
system.
Installation
Installation and repair work should
be by a Miele authorized service
technician. Work by unqualified persons could be dangerous and could
void the warranty.
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
This equipment is not designed for
maritime use or for use in mobile
installations such as caravans or aircraft. However, under certain conditions
it may be possible for an installation in
these applications. Please contact the
nearest Miele dealer or the Miele Technical Service Department with specific
requirements.
Before installation or service, disconnect the power supply to the
work area by unplugging the unit, “tripping” the circuit breaker or removing
the fuse.
Inspect the dishwasher for shipping damage. Do not install or operate a damaged unit. Contact the
place of purchase.
5
IMPORTANT SAFETY INSTRUCTIONS
Ensure that any plastic wrappings,
bags etc. are disposed of safely
and kept out of the reach of babies and
young children. Danger of suffocation!
This dishwasher should only be installed under a continuous
countertop secured to adjacent
cabinetry.
Do not install this dishwasher beneath a cooking surface or oven.
Do not, under any circumstances
cut the intake hose or submerge in
liquid. This hose contains electrical
components that could cause injury or
property damage if cut or submerged.
Use
Only use the dishwasher if all panels are properly in place.
Do not tamper with the controls.
To reduce the risk of injury, do not
allow children to play in, on, or
near the dishwasher.
Do not abuse, sit, or stand on the
door or baskets of the dishwasher.
Under certain conditions, hydrogen
gas may be produced in a hot
water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
period, turn on all hot water faucets and
let water flow from each for several minutes before using the dishwasher. This
will release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
6
Do not wash plastic items unless
they are labeled "dishwasher safe"
or the equivalent. For items not labeled,
check the manufacturer’s recommendations.
When loading tableware, place
sharp items away from the door
seal to prevent damage to the seal.
Load knives pointing downwards to
prevent injuries.
Only use detergents and rinse aids
recommended for residential dishwashers. Keep all detergents and rinse
aids out of the reach of children.
Do not drink water from the dishwasher! Harmful residues could be
present.
For dishwashers with visible heating
element
Do not touch the heating element
during or immediately after use.
Disposal of an appliance
If the appliance is removed from its
installation and will not be used,
the door to the wash cabinet should be
removed to prevent children from being
locked in the machine. When discarding an old dishwasher, unplug it from
the power outlet, remove the door to the
wash cabinet and cut off the power
cord.
SAVE THESE
INSTRUCTIONS
MESURES DE SÉCURITÉ IMPORTANTES
AVERTISSEMENT –
Au moment d’utiliser votre
lave-vaisselle, veuillez observer
toutes les mesures de sécurité de
base.
Cet appareil électroménager est conforme à tous les règlements et codes
sur la sécurité. Pour éviter de vous
blesser et d’endommager l’appareil,
veuillez lire soigneusement les instructions sur l’utilisation.
N’utilisez le lave vaiselle que pour
laver la vaiselle.
Le fabricant ne peut être tenu
responsable des dommages ou
blessures causés par une utilisation
inadéquate ou par des utilisations
autres que celles auxquelles
l’appareil est destiné.
Les réparations doivent être effectuées uniquement par une personne compétente. Débrancher l’appareil de la prise de courant avant d’en
faire l’entretien (enlever la fiche de la
prise ou fermer le disjoncteur).
Installer uniquement ce lave-vaisselle sous un comptoir continu qui
est fixé à des meubles adjacents.
Vous devez mettre le lave-vaisselle
à la terre. Installer le lave-vaisselle
en observant les instructions pour l’installation ci-jointes.
Utiliser des détersifs pour les
lave-vaiselle ménagers seulement.
Utiliser uniquement des détersifs et des
produits de rinçage recommandés pour
les lave-vaisselle.
Ne pas utiliser votre lave-vaisselle
à moins que tous les panneaux
soient bien en place.
Ne pas permettre aux enfants de
jouer dans ou sur le lave-vaisselle.
Ranger tous les détersifs et produits de rinçage hors de la portée
des enfants.
Ne pas modifier
les commandes.
Ne pas boire l’eau du meuble de
lavage.
7
MESURES DE SÉCURITÉ IMPORTANTES
Au moment de remplir le lave-vaisselle :
– Mettre les articles pointus de
manière à ce qu’ils n’endommagent
pas le seau étanche de la porte.
– Mettre le tranchant des couteaux
vers le bas afin de réduir les risques
de blessure.
Ne pas laver les articles en plastique à moins qu’ils n’indiquent "Va
au lave-vaisselle" ou l’équivalent. Vérifier les recommandations du fabricant
poir les articles non étiquetés.
Dans certaines conditions, un système d’eau chaude qui n’a pas été
utilisé pendant plus de deux semaines,
peut dégager de l’azote.
L’AZOTE EST EXPLOSIF. Si le système
d’eau chaude n’a pas été utilisé pendant une telle période de temps, ouvrir
tous les robinets d’eau chaude et laisser l’eau couler pendant plusieurs minutes avant d’utiliser le lave-vaisselle.
Ceci dissipera tout l’azote accumulé.
Ne pas fumer ni utiliser une flamme nue
durant ce temps.
8
Ne pas abuser et ne pas vous asseoir ni vous tenir sur la porte ou
sur les paniers du lave-vaisselle.
Enlever la porte et couper le cordon du lave-vaisselle avant de l’enlever aux déchets afin d’empêcher les
enfants de se blesser ou de s’enfermer
dans l’appareil par accident.
Lave-vaiselle avec l’élément
chauffant
Ne touchez pas l’élément chauffant
pendant le fonctionnement de l’appareil ou immédiatement après.
CONSERVER CES
INSTRUCTIONS
Caring for the environment
Energy saving washing
This dishwasher is exceptionally economical in the use of water and electricity. For best results follow these tips:
^ For lowest energy consumption and
the gentlest washing of china and
crystal, connect the dishwasher to a
cold water source.
^ For fastest possible wash times, yet
higher energy consumption, connect
the dishwasher to a hot water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads:
Select the "Top Solo" feature (see
"Additional features").
^ If baskets are only half full, select the
"Economy" program.
^ Use the correct amounts of detergent
and rinse aid.
9
Guide to the dishwasher
Wash cabinet
1
Upper spray arm (not visible)
7
Four height adjustable feet
2
Cutlery tray
8
Triple Filter System
3
Upper basket
9
Salt reservoir
4
Water feed for middle spray arm
10
Detergent dispenser
5
Middle spray arm
11
Rinse aid reservoir
6
Lower spray arm
12
Data plate
10
Guide to the dishwasher
Control panel
13
"On/Off" button
18
Check/Refill indicators
14
Program sequence display
19
Child Safety Lock
15
"Top solo" button
20
Door release
16
Program selector
21
Drying vent
17
"Start" button
Every dishwasher is tested before leaving the factory. Any water remaining in
the machine is from these tests and does not indicate that the machine has
been used.
11
Before using for the first time
To open the door
Child Safety Lock
The yellow key for the Child Safety
Lock is shipped on one of the spikes
at the front of the upper basket. Remove the key before using the dishwasher.
^ Press the release catch inside the
door grip.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will restart.
To close the door
^ Push the baskets in.
^ Lift the door and push until it clicks
into position.
The Child Safety Lock is designed to
prevent children from opening the dishwasher.
^ Use the provided key to lock or unlock the dishwasher.
Horizontal:
the door is locked
Vertical:
the door can be opened
12
Before using for the first time
Water softener
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above
8 gr/gal (values are in US gallons)
(140 ppm), the water should be softened. This takes place automatically in
the unit’s integrated water softener.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
– The dishwasher must be programmed to correspond to the water
hardness in your area.
– The water softener must be filled with
dishwasher salt for reactivation.
If your water hardness is consistently
lower than 8 gr/gal (140 ppm), you do
not need to add dishwasher salt. However, the dishwasher must still be programmed to correspond to the local
water hardness.
Where the water hardness fluctuates
e.g. between 9 - 17 gr/gal (160 - 310
ppm), always program the machine to
the higher value, 17 gr/gal (310 ppm) in
this example.
If there is a fault, it will help the service
technician to know the hardness of your
local water supply.
^ Please note the water hardness:
gr/gal
13
Before using for the first time
Programming the water softener
Your water hardness level must be programmed into the dishwasher using the
program selector and buttons on the
control panel.
^ Make sure the dishwasher is turned
off.
^ Turn the program selector to "Stop".
^ Press and hold the "Top Solo" button
and at the same time turn on the
dishwasher with the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
^ Turn the program selector to the position which corresponds to the water
hardness in your area (see table).
gr/gal*
ppm
1 - 4**
20 -
5- 7
Selector setting
70
Normal Plus
90 - 130
Normal
8 - 10
140 - 180
China & Crystal
11 - 13
200 - 230
Rinse & Hold
14 - 16
250 - 290
5 o’clock position
17 - 22
310 - 400
6 o’clock position
23 - 35
410 - 630
7 o’clock position
36 - 70
650 - 1260
Energy Saver
* US gallons
** factory preset
Example:
Water hardness is 20 gr/gal.
Turn the program selector to the
"6 o’clock" position.
14
Before using for the first time
^ Press the "Top Solo" button.
The "Top Solo" indicator will light.
^ Turn the program selector to "Stop".
^ Turn off the dishwasher.
The programmed water hardness is
stored.
Checking the programmed water
hardness
^ Make sure the dishwasher is turned
off.
^ Turn the program selector to "Stop".
^ Press and hold the "Top Solo" button
and at the same time turn on the
dishwasher with the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
^ Turn the program selector clockwise
until the "Top Solo" indicator comes
on.
The position where the "Top Solo" indicator comes on corresponds to the programmed water hardness (see table in
"Programming the water softener").
^ Turn the program selector to "Stop".
^ Turn off the dishwasher.
15
Before using for the first time
Filling the salt reservoir
To fill the salt reservoir:
If your water hardness level is greater
than 8 gr/gal, the salt reservoir should
be filled before the first use and when
the "Salt" indicator lights.
^ Remove the lower basket.
Only use water softener salt specially
formulated for dishwashers. Other salts
may contain insoluble additives which
can impair the water softener.
^ Place the provided funnel over the
salt reservoir.
The proper salt can be purchased from
your Miele dealer or Miele’s Technical
Service Department.
^ Unscrew and remove the salt reservoir cap located on the floor of the
wash cabinet.
The salt reservoir must be filled with
2 quarts (2 l) of water before adding
salt for the first time. Water does not
have to be added with subsequent
refills.
,Inadvertently filling the salt
reservoir with dishwashing detergent will damage the water softener.
^ Carefully fill with salt. The salt reservoir holds approximately 4.5 lbs
(2 kg) of salt. As it is filled, water will
run out.
^ Clean any excess salt from the
threads of the reservoir opening.
^ Screw the cap on firmly.
^ If the dishwasher will not be used immediately, run the "Rinse & Hold" program. This will remove any traces of
salt from inside the wash cabinet.
16
Before using for the first time
Salt indicator
Bypassing the salt indicator
When the salt reservoir is empty, the
"Salt-PC" indicator will light, indicating
that it should be refilled with reactivation salt.
If your water is soft (below 8 gr/gal) the
salt reservoir should not be filled with
salt. The indicator will remain lit and
should be disregarded or bypassed.
^ Remove the salt reservoir cap.
Looking into the salt reservoir, you will
see the top of the float chamber on the
right hand side, a.
After the reservoir has been filled, the
water softener is automatically reactivated the next time the dishwasher is
started. The "Salt" indicator will be lit
during this process.
^ Using a screwdriver, carefully pivot
the float chamber towards the center
of the reservoir.
^ Using needle nose pliers, pull the
cap, b, off of the float chamber, and
remove the float, c.
Replace the float chamber cap, push
the chamber back into its upright position, and replace the salt reservoir cap.
The "Salt" indicator should no longer be
lit.
17
Before using for the first time
Rinse aid
Rinse aid is recommended to prevent
spotting on dishes and glassware.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
Adding rinse aid
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way will allow water to enter the reservoir during the wash program.
^ Wipe up any spilled rinse aid. The
flap will remain closed during normal
operation.
^ Add rinse aid before the first use and
whenever the "Rise aid" indicator
lights.
^ Press the button in the direction of
the arrow until the flap springs open.
18
Before using for the first time
Adjusting the dosage
Rinse aid indicator
The rinse aid indicator on the control
panel will light when the rinse aid reservoir needs refilling.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
^ Use a higher setting if spots appear
on dry glassware.
When the indicator first comes on, there
will be enough rinse aid left for 2 - 3
washes.
^ Use a lower setting if streaking appears on dishes or glasses.
19
Loading the dishwasher
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed through out the inside of the dishwasher.
Wax, grease and paint will cause
permanent discoloration or damage
to the dishwasher.
^ Scrape food from dishes before placing in the dishwasher.
Do not rinse dishes.
^ Load dishes so that water can reach
all surfaces. Do not place dishes and
cutlery inside other pieces.
^ Hollow items such as cups and
glasses should be placed upside
down in the upper basket.
^ Concave based items, such as mugs
or bowls, should be placed at an angle on top of the coffee bar, so that
water does not pool.
^ To ensure good water coverage tall,
narrow, hollow pieces, such as a
vase, should be placed in the center
of the basket, rather than in the corners.
^ Small cups and glasses should be
placed on the cup racks. Taller mugs
and glasses can be placed beneath
the rack.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
20
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check clearance by manually rotating the spray
arms.
^ Food residue and spilt liquids should
be cleaned from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
Loading the dishwasher
Items not recommended for
dishwashing
– Cutlery with wooden handles.
– Wooden cutting boards.
– Glued items such as old knives with
handles glued together around the
shank of the blade.
– Hand made craft items, antique,
metal trimmed or decorative glassware.
– Lead crystal.
– Copper, brass, tin or pewter.
– Plastic items that are not heat resistant.
– Dishes with color painted over the
glaze. These dishes may fade over
time.
– Cast iron pots and pans.
Glassware:
– There are no standard guidelines for
washing glassware but, when in
doubt wash by hand.
– Wash delicate glassware with a low
temperature program and without the
extended drying feature to reduce
the risk of clouding. See the "Program guide".
– If crystal or delicate glasses will be
washed frequently, connect the dishwasher to cold, rather than hot water.
– Clouding or etching may occur on
glasses after frequent washing.
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe.
Silver and aluminum:
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise, mustard, legumes, fish, fish brine and
marinades.
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
21
Loading the dishwasher
Cutlery tray (SC units)
The removable cutlery tray makes unloading flatware easy. Simply carry the
cutlery tray to where the flatware is
stored and put the entire basket away
in one trip.
Spoon heads should be placed in contact with at least one of the serrated retainers of the cutlery tray to ensure that
water runs off freely.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge and
forks with the prongs between the holders. Spoons should be placed in the
opposite direction with the handles between the holders.
Longer items such as soup ladles, cake
slices, mixing spoons and long knives
should be placed lengthwise in the indentation of the cutlery tray.
22
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
Loading the dishwasher
Upper basket
Adjusting the upper basket
On select models, the upper basket
can be raised or lowered to accommodate tall items.
^ Slide out the upper basket.
Load the upper basket with small, lightweight, or delicate items such as cups,
saucers, glasses, dessert bowls and
flat pans.
Long items such as soup ladles, mixing
spoons and knives can be set across
the front of the upper basket.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
The basket can also be angled to fit tall
items in both, the lower and upper baskets. The angles should not be set to
opposite extremes. This will block the
middle spray arm. Take care when sliding the basket in and out in this position.
23
Loading the dishwasher
Adjustable cup racks
Coffee bar
Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
To allow water to run off the bottom of
coffee mugs, place slanted on top of
the coffee bar. The bar can also be
used to separate two rows of glasses.
To stack wide items, flip the bar to the
right.
24
Loading the dishwasher
Lower basket
Height limit
For larger and heavier items such as
plates, serving platters, sauce pans,
bowls.
Dishwasher with cutlery tray
The guide at the front of the upper basket determines the maximum height for
items placed in the lower basket so that
the middle spray arm is not blocked.
25
Lower basket inserts
Various removable inserts are available for the lower basket to accomodate special items to be washed.
Removing an insert
^ To remove an insert, gently pull up on
the handle.
Inserting an insert
^ Slid the hitches of the inset under the
vertical struts of the lower basket.
^ Push down on the handle to snap the
insert into position.
26
Lower basket inserts
Foldable spike insert
A highly flexible design holds tableware
securely. It can be folded out of the way
for pots, pans and other large items.
This insert secures plates and platters.
Foldable spikes
Two rows of spikes can be folded
down, to create more room for larger
dishware e.g. pots, pans and bowls.
^ Press on the yellow levers, a, to fold
down the spikes, b.
^ Hook the foldable spike insert into the
back right corner of the lower basket,
the area marked in white.
27
Lower basket inserts
PlateGuard Plus insert
A unique design cradles plates at 3
points and can be used for washing
cups, glasses, plates, bowls and pots.
^ Hook the PlateGuard Plus insert into
the left half of the lower basket, the
area marked in white.
28
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or the Miele Technical Service Department.
Bottle holder
part # 03 857 850
to wash milk or baby bottles
Glassware insert
for the lower basket
part # 01 145 642
to wash a large number of glasses
Glassware insert
for the upper basket
part # 03 636 034
to wash long stemmed glassware
PlateGuard insert
part # 02 244 870
to wash plates with a diameter
up to 12 1/2" (32 cm)
Cup rack for the
PlateGuard insert
part # 03 859 730
to wash cups and stemware
in the lower basket
Small cutlery basket
for the lower basket
part # 02 372 335
to wash additional cutlery
29
Operation
Adding detergent
,Dishwasher detergents contain
irritant and corrosive ingredients.
Keep children away from detergent.
Do not fill the detergent dispenser
until you are ready to start the dishwasher.
Only use powder detergents or tablets formulated for residential dishwashers. The use of gel or liquid detergent is not recommended.
Never fill the detergent dispenser to
capacity.
Do not use more than the recommended amount of detergent. Continued use of too much detergent
may cause machine damage.
The horizontal marks in Compartment II
indicate levels of approximately 1 1/4,
1 3/4 and 2 tablespoons (20, 25 and
30 ml) respectively.
^ With the dishwasher door fully open
fill compartment II with 2 tablespoon
(30 ml) of powder detergent, or one
detergent tablet.
^ Close the cover. The cover will always open at the end of a wash program except in "Rinse & Hold".
2 tablespoon (30 ml) of detergent is
enough for most normally soiled loads.
For heavily soiled loads, or if food has
dried on the dishes, a program containing a prewash cycle should be selected. Add an extra tablespoon (15 ml)
of detergent to compartment I.
^ To open, press the latch on the detergent dispenser.
30
Less detergent is needed in homes with
very soft water and when washing
lightly soiled dishes.
Operation
Running the dishwasher
Waterproof System
^ Make sure the spray arms are not
blocked.
All Miele dishwashers are specially designed to shut off the water intake and
drain the wash cabinet in the rare event
of an internal water valve failure.
^ Close the door.
^ Turn on the dishwasher.
The "Start" (17) indicator will flash.
^ Select a wash program by turning the
program selector (16) to the left or
right. Refer to the "Program guide" for
details.
^ Select "Top Solo" if desired. See "Additional features".
^ Press the "Start" button (17).
The program will begin.
For this feature to be active, the machine must be "On" (not necessarily
running) and the door must be closed.
Program sequence indicator
(14)
The current step of the program is indicated by one of the program sequence
indicators (14).
Do not end a program prematurely!
Important program steps could be
omitted (e. g. reactivating the water
softener).
31
Operation
At the end of a program
Interrupting a program
The "End" indicator will light when the
program has finished.
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from where it was interrupted.
^ Turn the program selector (16) to
"Stop".
^ Turn off the dishwasher.
^ Open the dishwasher door slightly to
allow the dishes to cool before unloading.
It is advisable to turn off the water
supply if the dishwasher will not be
used for a period of time (e.g. while
vacationing).
,Water in the dishwasher may be
hot. There is a danger of being
burned! Only open the door if absolutely necessary.
Changing a program
If a program is running:
^ Turn the program selector (16) to
"Stop" for at least one second.
^ Turn the program selector (16) to the
new program.
^ Select "Top Solo" if desired (see "Additional features").
^ Press the "Start" (17) button to begin
the wash program.
If a program has not started:
^ Turn on the program selector to the
new program.
^ Press the "Start" (17) button to begin
the wash program.
32
Operation
Program guide
Program
When to use
Program cycle
Pre- Main Interim Final Drywash wash rinse rinse ing
1 2
1 2
X
X X
X
Pots & Pans for heavily soiled pots and pans with dried on food X X
Main wash temperature 170 °F (75 °C)
Run-time 128 min
- X
X
X X
X
X
Sani Wash
extended wash time
for sanitizing normally soiled dishware with dried
on food
Main wash temperature 150 °F (65 °C)
Run-time 142 min
X
X X
X
Economy
energy saving program
for normally soiled dishware
Main wash temperature 130 °F (55 °C)
Run-time 85 min
X X
X
X X
X
Energy Saver for light to normally soiled dishware,
only use, if the dishwasher is connected to hot water
Run-time 65 min
X X
X
X X
X
Normal Plus higher wash temperature helps to clean
normally soiled dishware with stubborn dried on
food or greasy residues
Main wash temperature 150 °F (65 °C)
Run-time 135 min
Normal 1)
X X
X
X X
X
for normal soiled dishware
Main wash temperature 130 °F (55 °C)
Run-time 118 min
- X
X
X X
X
China &
"Gentle program"
Crystal o
for lightly soiled and heat sensitive tableware
Main wash temperature 115 °F (45 °C)
Run-time 72 min
Rinse & Hold
for rinsing dishes when a complete cycle is not needed - X
Run-time 11 min
1) Standard for Energy Label
When washing a full load in Pots & Pans, Sani Wash and the Normal programs use at least 2 tablespoons (30 ml) of detergent.
For the Pots & Pans program add an additional teaspoon (5 ml) to compartment I.
If "Top Solo" is selected, reduce the amount of detergent to 1 1/4 tablespoons (20 ml).
Program times are based on a hot water connection. If the unit is connected to cold water, program
times will increase by approximately 25 minutes.
Usage:
Electric 0.06 - 2.4 (kWh)
Water
1.3 - 6.3 US gallons (5 - 24 L)
33
Operation
Additional features
"Top Solo" (15)
Using "Top Solo" will save water and
energy.
This program is recommended when
there is only a small load to clean. "Top
Solo" can be selected with all programs.
With this feature, water is directed only
to the top and middle spray arms in the
dishwasher. This means that the water
jets are only aimed at items in the upper basket and the cutlery tray.
The middle spray arm also directs
water downwards, so lightly soiled
plates or platters can be placed in the
lower basket.
When using this program, do not place
pots, bowls or other hollow containers
in the lower basket.
Because a smaller load is being
washed the amount of detergent recommended can be reduced to 1 1/4
tablespoons.
34
^ Turn the dishwasher on using the
"On/Off" (13) button.
The "Start" (17) indicator will flash.
^ Turn the program selector (16) to the
left or right to the desired program.
^ Press the "Top Solo" (15) button.
The "Top Solo" (15) indicator will light.
^ Press the "Start" (17) button.
The program will begin.
Operation
Extended drying
If the desired drying results are not consistently achieved, the turbothermic
cooling fan can be programmed to run
an extra 14 minutes at the end of each
program.
^ Turn the program selector to the
"9 o’clock" position.
If the "Top Solo" indicator is not lit:
the extended drying time is off.
If the "Top Solo" indicator is lit:
the extended drying time is on.
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
If the correct drying time is set:
Turning extended drying on/off
^ Turn off the dishwasher.
^ Turn off the dishwasher.
^ Turn the program selector to "Stop".
^ Press and hold the "Top Solo" button
and at the same time turn the dishwasher on using the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be refilled.
If the drying time is incorrect:
^ Press the "Top Solo" button, to
change the setting.
According to the previous setting the
"Top Solo" indicator goes on or off.
^ Turn the program selector to "Stop".
The changed extended drying option is
stored.
^ Turn off the dishwasher.
If any other indicator is lit or flashing,
the above steps must be repeated.
35
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service
call.
,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could
cause personal injury or machine damage.
What if …
Possible fault
the dishwasher does not The door is not properly
start?
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
the dishwasher does not
start, after pressing the
"Start" button and
the "Start" indicator
flashes?
the dishwasher stops
during a program?
The program selector is
set to "Stop".
Fix
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
– Turn the program selector to the desired program.
– Press the "Start" button.
Reset the circuit breaker.
Make sure it is a 15 A
breaker.
the "Intake/Drain" indi- The intake water has not – Start the program
again.
cator comes on during
reached the required temthe "Energy Saver" pro- perature of 115 °F/45 °C, – If the indicator light cothe hot water system may
gram?
mes on again, select a
be overloaded, see "Prodifferent program.
gram guide".
36
The fuse or breaker has
tripped.
Frequently asked questions
What if …
Possible fault
Fix
the "Intake/Drain" indi- The water valve is closed.
cator is lit or flashing
The filter in the water inlet
and the dishwasher may is blocked.
have stopped?
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
The waterproof system
has activated.
Open the water valve.
See maintenance instructions.
Contact a plumber.
the "Drain" indicator
Water intake error.
flashes and the program
stops?
– Turn off the dishwasher
before fixing a problem.
– Open the water valve.
Drain error, water left in
the wash cabinet
Call the Miele Technical
Service Department.
– Check and clean the
water intake filter, see
maintenance instructions.
– The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar). Contact a plumber.
– Turn off the dishwasher
before fixing a problem.
– Clean the triple filter,
see maintenance instructions.
– Clean the drain pump
and the non-return
valve, see maintenance
instructions.
– Remove any kinks in
the drain hose.
37
Frequently asked questions
What if …
Possible fault
Fix
the "End", "Start" and
There may be a technical – Turn the program selec"Top Solo" indicators
fault.
tor to "Stop".
flash at the same time at
– Turn off the dishwasher.
the end of a program?
A few seconds later:
– Turn the dishwasher on.
– Select the desired program.
– Press the "Start" button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
The spray arm is hitting
an item in the basket.
Interrupt the program, rearrange items blocking
the spray arms.
there is a rattling noise? Items are not secure in
the wash cabinet.
Interrupt the program and
rearrange loose pieces.
there is a knocking
noise in the wash cabinet?
there is a knocking
noise in the water
pipes?
the dishes are not dry,
glasses and cutlery are
spotted?
38
This may be caused by
the installation or the diameter of pipe.
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
Increase the dosage or
refill the reservoir, see "Before using for the first
time".
Extended drying is not ac- Activate the Extended
tivated.
drying feature.
Dishes were taken out too Leave dishes in longer.
soon.
Frequently asked questions
What if …
Possible fault
Fix
dishes are not clean?
The dishes were not
loaded correctly.
The program was not
powerful enough.
See, "Loading the dishwasher".
Select a more intensive
program see, "Program
guide".
Use more detergent, see,
"Adding detergent".
Clean the spray arm jets,
see, maintenance instructions.
Not enough detergent
was dispensed.
The spray arm jets are
clogged.
The triple filter is clogged Clean and reseat the filter,
or not correctly seated.
see, maintenance instructions.
tea or lipstick stains
have not been completely removed?
white residue is visible
on cutlery and dishes,
clouding occurs on
glassware and film can
be wiped off?
The wash temperature of Select a program with a
the selected program was higher temperature.
too low.
Not enough detergent
Use more detergent.
was used.
Not enough rinse aid was Increase the dosage,
used.
see "Before using for the
first time".
The salt reservoir is
Add reactivation salt,
empty.
see "Before using for the
first time".
The salt reservoir cap was
not correctly screwed on.
The programmed setting
of the water softener is too
low.
there is a bluish sheen
on the surface of
glasses and film can be
wiped off?
The rinse aid dosage is
set too high.
glasses are dull and dis- Glasses are not dishcolored and film cannot washer safe.
be wiped off?
Reseat it making sure it
screws back on correctly.
Adjust the setting of the
water softener , see "Before using for the first
time".
Reduce the dosage, see
"Before using for the first
time".
There is no remedy.
Only wash dishwasher
safe glasses.
39
Frequently asked questions
What if …
Possible fault
plastic items are discol- Natural dyes e. g. from
ored?
vegetables may be the
cause. Not enough detergent was used to break
down natural dyes.
there are rust stains on The salt reservoir cap was
cutlery?
not screwed on properly.
The affected items are not
corrosion resistant.
Fix
Use more detergent, see
"Adding detergent".
Discoloration is permanent.
Reseat and screw the cap
on firmly.
There is no remedy.
Only wash dishwasher
safe cutlery.
detergent is left in the
The dispenser was damp Dry the dispenser before
adding detergent.
dispenser at the end of a when detergent was
program?
added.
the detergent dispenser Detergent residue is
Remove the residue.
lid can not be closed
blocking the catch.
properly?
water remains in the
The triple filter in the wash Clean the filter,
wash cabinet at the end cabinet is clogged.
see maintenance instrucof a program?
tions.
The drain pump or the
Clean the drain pump and
non-return valve may be the non-return valve,
blocked.
see maintenance instructions.
The drain hose is kinked. Remove the kink.
40
After sales service
In the event of a fault which you cannot
correct yourself please contact:
– Your Miele Dealer
or
– The Miele Technical Service Department.
Program update function - PC
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
For example, if a detergent with good
wash results using only cold water be-
USA 1-800-999-1360
techserv@mieleusa.com
CDN 1-800-565-6435
service@miele.ca
When contacting the Miele Technical
Service Department, please quote the
model and serial number of your appliance.
These can be found on the data plate
on the upper inside edge of the dishwasher door.
comes available, the wash programs
can be modified to take advantage of
this.
41
Transport
To transport the dishwasher, e. g. when
moving to a new home, note the following:
– Empty the dishwasher.
– Secure any loose parts, e. g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the upright position.
If unavoidable it may be transported
on its back.
Do not transport it on its side or on
the door. Residual water in the machine could leak and cause electrical
damage.
42
User Maintenance Instructions
To prevent accidents
and machine damage,
read these instructions
before
installation or use.
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
The filter system should be cleaned every 4 - 6 months or whenever a foreign
object is trapped.
Cleaning the filter in the wash
cabinet
^ Turn off the dishwasher before cleaning.
^ Turn the handle counterclockwise to
release the triple filter system.
44
^ Lift the filter out of the machine. Remove any solid particles and rinse
under running water. Scrub with a nylon brush if necessary.
To clean the underside of the filter, the
flap must be opened:
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Pull back the yellow clip.
^ Lock the filter by turning the handle
clockwise.
^ Rinse all parts under running water.
Scrub with a nylon brush if necessary.
^ Close the flap so that the clip engages.
,The dishwasher must not be
used without the filter locked in
place.
45
Cleaning the spray arms
^ Remove the lower basket.
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before cleaning.
Remove the spray arms as follows:
^ Remove the cutlery tray (if present).
^ Press the top spray arm upwards to
engage the inner ratchet and unscrew the spray arm.
^ Pull the lower spray arm firmly upwards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a toothpick to push food particles into the
spray arm jets.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check
that they rotate freely.
46
Cleaning the wash cabinet
Generally, the wash cabinet is self
cleaning if the correct amount of dishwasher detergent is used.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or the Miele Technical Service
Department.
Cleaning the door and door
seal
^ Wipe the door seal with a damp cloth
to remove any food particles.
^ Food residue and spilt liquids should
be wiped from the sides of the dishwasher door. These are outside of the
wash cabinet and are not cleaned by
water from the spray arms.
Cleaning the exterior
,Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dishwasher.
They will damage the surface.
Plastic
All plastic surfaces and the control
panel can be cleaned with warm water
and liquid dish soap applied with a soft
sponge.
Wipe dry using a soft cloth.
,Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become discolored
or damaged if not cleaned regularly.
Do not use a stainless steel cleaner on
the knobs or buttons.
Wood
Panels made from wood should be
cleaned using a soft damp cloth and an
appropriate wood cleaner.
47
Cleaning the water inlet filter
A filter is incorporated in the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard, or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
Installing an in-line water filter
^ If your water contains a large number
of insoluble substances, a filter between the water valve and the intake
hose connection is recommended.
These filters can be purchased from
Miele’s Technical Service Department.
,The plastic valve housing on the
intake hose contains electrical components and should not be immersed, or run through water.
Cleaning the filter:
^ Disconnect the dishwasher from
electricity (unplug it or "trip" the circuit breaker).
^ Turn off the water valve.
^ Unscrew the intake hose.
^ Carefully remove the rubber seal.
^ Remove the filter using a needle nose
plier and rinse under running water.
^ Return the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
^ Slowly turn on the valve and test for
leaks.
48
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher.
^ Remove the triple filter (see "Cleaning
the filter in the wash cabinet").
^ Use a jug or bowl to scoop water out
of the wash cabinet.
^ Pull out the non-return valve and
rinse well under running water.
^ Tilt the locking clamp to the side.
The drain pump is beneath the non-return valve (see arrow).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully refit the non-return valve
and secure it with the locking clamp.
^ Refit and lock the filter in place.
49
50
51
Alterations rights reserved (G 851 Plus) / 000
This bio-friendly paper was bleached without the use of chlorine.
2501
Download PDF