Cisco Servers Integrated Management Controller GUI Configuration Guide

Configuring Platform Event Filters
This chapter includes the following sections:
• Platform Event Filters, page 1
• Configuring Platform Event Filters, page 1
• Resetting Platform Event Filters, page 2
Platform Event Filters
A platform event filter (PEF) can trigger an action. For each PEF, you can choose the action to be taken (or
take no action) when a platform event occurs.
Configuring Platform Event Filters
Before You Begin
You must log in as a user with admin privileges to configure platform event filters.
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
Step 3
On the Admin tab, click Event Management.
In the Platform Event Filters area, complete the following fields for each event:
Name
Description
ID column
The unique filter ID.
Event column
The name of the event filter.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 2.0
1
Configuring Platform Event Filters
Resetting Platform Event Filters
Name
Description
Action column
For each filter, select the desired action from the scrolling list box. This
can be one of the following:
• None—No action is taken.
• Reboot—The server is rebooted.
• Power Cycle—The server is power cycled.
• Power Off—The server is powered off.
Step 4
Click Save Changes.
Resetting Platform Event Filters
Procedure
Step 1
In the Navigation pane, click the Admin tab.
Step 2
Step 3
On the Admin tab, click Event Management.
In the Platform Event Filters area, click Reset Event Filters.
Resets the event filters and displays the latest event filters.
Cisco UCS C-Series Servers Integrated Management Controller GUI Configuration Guide, Release 2.0
2
">