Simrad SH90
Caution
If the transducer hits larger objects or bottom, the transducer shaft may be
bent, or - in worst case - it can be broken off. A broken transducer shaft will
cause water leakage through the top of the shaft.
In such cases, do not raise the transducer shaft to its upper position.
To prevent serious damage, you must have a water pump and a warning
system in the sonar room.
Transducer
The cylindrical Transducer allows the sonar beam to give full 360 degrees coverage of
the water volume from +10 and down to -60 degrees.
372739/D
15
">
