Abit NF7 Series Motherboard User Manual

1-6
1-4. Layout Diagram (NF7-S2/NF7-S2G)
NF7 Series
Chapter 1
2-6
Chapter 2
(3). CMOS Memory Clearing Header
This header uses a jumper cap to clear the CMOS memory.
•
Pin 1-2 shorted (default): Normal operation.
•
Pin 2-3 shorted: Clear CMOS memory.
WARNING: Turn the power off first (including the +5V standby power) before clearing the CMOS
memory. Failing to do so may cause your system to work abnormally or malfunction.
NF7/NF7-S/NF7-M:
NF7-S2/NF7-S2G:
NF7 Series
Hardware Setup
(4).
2-7
Wake-up Header
These headers use a jumper cap to enable/disable the wake-up function.
NF7/NF7-S/NF7-M:
•
KBPWR1:
Pin 1-2 shorted (default): Enable wake-up function support at Keyboard/Mouse port.
Pin 2-3 shorted: Disable wake-up function support at Keyboard/Mouse port.
•
USBPWR1:
Pin 1-2 shorted (default): Enable wake-up function support at USB1 port.
Pin 2-3 shorted: Disable wake-up function support at USB1 port.
User’s Manual
2-8
Chapter 2
NF7-S2/NF7-S2G:
•
KBPWR1:
Pin 1-2 shorted (default): Disable wake-up function support at Keyboard/Mouse port.
Pin 2-3 shorted: Enable wake-up function support at Keyboard/Mouse port.
•
USBPWR1:
Pin 1-2 shorted: Disable wake-up function support at USB2 port.
Pin 2-3 shorted (default): Enable wake-up function support at USB2 port.
•
USBPWR2:
Pin 1-2 shorted: Disable wake-up function support at USB1 port.
Pin 2-3 shorted (default): Enable wake-up function support at USB1 port.
•
USBPWR3:
Pin 1-2 shorted: Disable wake-up function support at FP-USB1 port.
Pin 2-3 shorted (default): Enable wake-up function support at FP-USB1 port.
•
USBPWR4:
Pin 1-2 shorted: Disable wake-up function support at FP-USB2 port.
Pin 2-3 shorted (default): Enable wake-up function support at FP-USB2 port.
NF7 Series
">