Perle Cabling Examples User Manual

Perle
XSTREAM Cabling Examples
The following are examples of cable configurations for connecting terminals and modems
to the XSTREAM admin port and RJ45 ports.
Admin Port DB25 Pinouts
Pin
Circuit
Function
2
RXD
Receive Data
3
TXD
Transmit Data
7
S/GND
Signal Ground
DB9 Pinouts
Pin
3
2
5
For connecting the XSTREAM admin port to a PC DB9 com port or DB25 terminal.
XSTREAM Admin Port
DB25
7
2
3
PC
Com2 DB9
5
3
2
Terminal
DB25
7
2
3
XSTREAM Admin Port
DB9
5
3
2
PC
Com2 DB9
5
3
2
Terminal
DB25
7
2
3
RJ45 Port pinout
Pin
Circuit
Function
1
2
3
4
5
6
7
8
Shield
DCD
DSR
DTR
S/GND
TXD
RXD
CTS
RTS
P/GND
Data Carrier Detect
Data Set Ready
Data Terminal Ready
Signal Ground
Transmit Data
Receive Data
Clear To Send
Request To Send
Protective (Chassis) Ground
Perle
Page 1 of 6
1st June 1999
Perle
RJ45 to DB25 Terminal cable configuration
For standard terminal operating at slow speeds or using software flow control. A simple
3-pin connection can be used.
RJ45
RXD
TXD
S/GND
6 --------------------- 2
5 --------------------- 3
4 ---------------------- 7
DB25 Terminal
TXD
RXD
S/GND
Example line configuration for a terminal logging on to the XSTREAM
Service:
Speed:
Flow :
Bits :
jslogin
9600
soft
8
Parity :
Stop :
Terminal :
none
1
vt100
RJ45 to DB25 terminal with hardware flow control
For terminals operating at speeds high than 9600 baud or for terminals which do not
support software flow control.
RJ45
RXD
TXD
RTS
CTS
S/GND
6
5
8
7
4
------------------------------------------------------------------------------------------------
2
3
20
5
7
DB25 Terminal
TXD
RXD
DTR
CTS
S/GND
Example line configuration for a terminal logging on to the XSTREAM
Service:
Speed:
Flow :
Bits :
Perle
jslogin
9600
hard
8
Parity :
Stop :
Terminal :
none
1
vt100
Page 2 of 6
1st June 1999
Perle
RJ45 to DB25 terminal using the modem device
Using the modem device on a local connection ensures that the login process is killed
when the terminal is switched off. This is achieved by wiring the terminals RTS or DTR
to the RJ45 DCD.
RJ45
RXD
TXD
S/GND
DCD
6
5
4
1
---------------------------------------------------------------------------------
2
3
7
20
DB25 Terminal
TXD
RXD
S/GND
DTR or 4 RTS
Example line configuration for a terminal logging on to the XSTREAM
Service:
Speed:
Flow :
Bits :
jslogin
9600
soft
8
Parity :
Stop :
Terminal :
Dial :
none
1
vt100
in
RJ45 to DB25 terminal using the modem device and hardware flow control
Using the modem device on a local connection ensures that the login process is killed
when the terminal is switched off. This is achieved by wiring the terminals RTS to the
RJ45 DCD.
RJ45
RXD
TXD
RTS
S/GND
DCD
6
5
8
4
1
------------------------------------------------------------------------------------------------
2
3
20
7
4
DB25 Terminal
TXD
RXD
DTR
S/GND
RTS
This example assumes that DTR on the terminal is being used for hardware flow control.
If RTS is used for hardware flow control connect DTR on the terminal to DCD on the
XSTREAM and RTS on the terminal to RTS on the XSTREAM.
Example line configuration for a terminal logging on to the XSTREAM
Service:
Speed:
Flow :
Bits :
Perle
jslogin
9600
hard
8
Parity :
Stop :
Terminal :
Dial :
none
1
vt100
in
Page 3 of 6
1st
June 1999
Perle
RJ45 to DB25 modem cable configuration
For connecting a modem to XSTREAM.
RJ45
RXD
TXD
RTS
CTS
DSR
S/GND
DCD
DTR
6 --------------------5 --------------------8 --------------------7 --------------------2 --------------------4 --------------------1 --------------------3 ---------------------
3
2
5
4
20
7
8
6
DB25 Modem
RXD
TXD
CTS
RTS
DTR
S/GND
DCD
DSR
Example line configuration for logging on to a XSTREAM via a modem
Service:
Speed:
Flow :
Bits :
jslogin
9600
hard
8
Parity :
Stop :
Dial :
none
1
in
RJ45 to RJ45 Null Modem Cable
For connection 2 XSTREAM or a XSTREAM to a Specialix Standard RJ45 port.
RJ45
RJ45
DCD
1 ------------------------ 3
DTR
DSR
2 ----|
Perle
DTR
3 ------------------------- 1
|---- 2
DCD
DSR
S/GND
TXD
RXD
CTS
RTS
4 -----------------------5 -----------------------6 -----------------------7 -----------------------8 ------------------------
S/GND
RXD
TXD
RTS
CTS
4
6
5
8
7
Page 4 of 6
1st
June 1999
Perle
RJ45 to DB25 Serial Printer cable using software flow control
RJ45
RXD
TXD
S/GND
6 --------------------- 2
5 --------------------- 3
4 --------------------- 7
DB25 Serial Printer
TXD
RXD
S/GND
Example line configuration for a printer connected to the XSTREAM using RCP to print
from a host.
Service:
Speed:
Flow :
Bits :
printer
9600
soft
8
Parity :
Stop :
none
1
RJ45 to DB25 Serial Printer cable using hardware flow control
This example is for a printer using the DTR pin for hardware flow control.
RJ45
RXD
TXD
S/GND
RTS
6
5
4
8
-----------------------------------------------------------------------------
2
3
7
20
DB25 Serial Printer
TXD
RXD
S/GND
DTR
Example line configuration for a printer connected to the XSTREAM using RCP to print
from a host.
Service:
Speed:
Flow :
Bits :
Perle
printer
9600
hard
8
Parity :
Stop :
none
1
Page 5 of 6
1st June 1999
Perle
RJ45 to DB9 PC Com Port configuration
For standard terminal operating at slow speeds or using software flow control. A simple
3-pin connection can be used.
RJ45
RXD
TXD
S/GND
6 --------------------- 3
5 --------------------- 2
4 --------------------- 5
DB9 Com Port
TXD
RXD
S/GND
Example line configuration for a pc logging on to the XSTREAM
Service:
Speed:
Flow :
Bits :
Perle
jslogin
9600
soft
8
Parity :
Stop :
Terminal :
none
1
vt100
Page 6 of 6
1st June 1999
">