PAC TR7 Universal Trigger Module Tech Brief


Add to my manuals

advertisement

PAC TR7 Universal Trigger Module Tech Brief | Manualzz

-

Clarion / Pioneer / Jensen / Dual marine mode bypass using TR7 -

ver. 2

Pacific Accessory Corporation

VPW Arbitration

Class 2

J1850

1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0

Class 2

EOD J1850 CRC

1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0

Class 2

1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0

J1850 Class 2

1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0

*Marine Mode is for use in water vessel’s only. In no way is it intended for use while operating any vehicle on-road.*

1. Start with ONLY power and ground connected. Turn the programming switch on

TR-7 to the ON position.

2. Turn power on and then pulse brown wire to ground 17 times. (after 3 seconds the

LED will flash back to you 17 times)

3. Pulse the brown wire to ground one time to start the timer programming.

a. The LED will rapidly flash once. You will do nothing.

b. The LED will then rapidly flash twice. You will pulse the brown wire to ground

once. After three seconds the LED should flash one time to confirm that it

accepted it.

c. The LED will rapidly flash three times. You will do nothing.

d. The LED will rapidly flash four times. You will do nothing.

4. The LED will rapidly flash a bunch of times and then go out.

5. Turn the power off and move the programming switch on the TR-7 to the off position.

6. Connect the TR-7 according to the diagram below.

12v

Switched

Remote wire from radio

86

87

87a

85

30

Black

Red

Green

Brown

Blue

White

Orange

(-) Chassis Ground

(+) 12 volts constant/switched

(+) 0.8-16 Volts Input Trigger

(-) Input Trigger

(+) 12 volt output-2 amps max

(-) Output-150 ma. max

(-) Output-150 ma. max

Programming switch must be turned off after the PTR7 is programmed!

MODEL TR7

Universal Trigger Output Module

OFF-ON

Standard (SPDT)

30amp Relay

Parking Brake wire from radio

*Marine Mode is for use in water vessel’s only. In no way is it intended for use while operating any vehicle on-road. *

2-23-2010 TT

Pacific Accessory Corporation - 1340 Ritchey Street, Santa Ana, CA. 92705 [email protected] • www.pac-audio.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

How do I connect the VX404A to my boat?
Connect the black wire to the chassis ground, the red wire to a constant 12-volt power source, and the blue wire to the switched remote wire from the radio.
What is the purpose of the green wire?
The green wire is used as a trigger input for the VX404A. When it receives a 0.8-16 volt signal, it will turn on the blue output wire.
What is the purpose of the brown wire?
The brown wire is used as a trigger input for the VX404A. When it receives a ground signal, it will turn on the white and orange output wires.
How many amps can the blue output wire handle?
The blue output wire can handle up to 2 amps.
How many amps can the white and orange output wires handle?
The white and orange output wires can each handle up to 150 milliamps.

advertisement