Hammond Manufacturing Cable Manager Ring Panel Instruction Manual

ASSEMBLY INSTRUCTIONS FOR
PCMBS - SERIES
CABLE MANAGER RING PANEL
BUL10363
REV. A
PAGE 1 OF 1
5
5
B
1
1
A
3
4
2
3
DETAIL A
2
DETAIL B
ASSEMBLY INSTRUCTIONS:
A) Select the height at which to mount the cable manager
ring panel (item 1) on the combination rails (item 5).
B) If mounting rails have square cutouts insert 2 cage nuts
(item 4) per rail at desired height. This can be done
using a cage nut insertion tool. (Detail B)
COMPLETE ASSEMBLY
ITEM No.
1
2
3
4
5
PARTS LIST
DESCRIPTION
CABLE MANAGER RING PANEL
SCREWS (NOT INCLUDED)
WASHERS (NOT INCLUDED)
CAGE NUTS (NOT INCLUDED)
COMBINATION RAILS (NOT INCLUDED)
TOOL BOX
#2 Phillips Head
Screw Driver
QTY
1
4
4
4
2
C) Line up the mounting slots on the cable manager ring
panel (item 1) with holes on the combination rails
(item 5). Using 4 screws and washers (items 2 & 3)
purchased for the combination rails secure the cable
manager ring panel to the combination rails. (Detail A
& B)
HAMMOND
MANUFACTURING
TM
ELECTRONICS GROUP
visit our website @ www.hammondmfg.com
">