Quality and reliability is our tradition.
CE
ee et
mama” KYORITSU
AC/D C 0.01A~300.0A (Carrying case included)
Designed to international safety standard IEC61010-1 CAT. III 300V
Minimum resolution of 0.01A AC/DC
Capable of measuring AC and DC currents up to 300A
Data hold function
Auto-zero function to allow one touch zero adjustment
Sleep function to save battery consumption
24mm-dia tear drop shaped jaws
KEW SNAP
KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD.
Compact, truly portable and high performance
digital AC/DC current mini clamp meter.
Ml LAYOUT DIAG RAM Jaw Trigger Range Selector/Power Switch
= 300A
К
MAX. OFF = С | DIGITAL AC/DC CLAMP METER
~ A *
=== A + X
HOLD - | KY
| m) A лог.) AE ASL
) -
= — —-—"s Zero Adjust Button Display Safety Hand Strap
Transformer Jaws Data Hold Button
ESPECIFICATIONS Maximum 300V AC
Circuit Voltage
Withstand Voltage | 3700V AC for 1 minute
@AC/DC Current Ranges (at 23+5C,AH85% or less) Aa ЕЕ Approx 2 seconds
Range | Measuring Range Agcuraoy Conductor Size Approx. $ 24mm
Safety Standard IEC61010-1 CAT. II 300V Pollution Degree2
a 404 0-40.00A + 1,0%rdg + 4dagt(50/60Hz) o IEC61010-2-032
Current E 2.5%rdg E 4dat(20-1kHz =
(Auto daa ) Dimensions 147(L) X 59(W) X 25(D)mm
Rangin 300A 20.0- +1.5%rdg H4dat(50/60Hz) ee
angl 9) 200.0A +2 5% is + ada 20-1 kHz) Weight Approx.1 00g(batte ries includ ed)
200 0- +3.5%rda(50/60Hz) Power Source | 1.5V button cell X2 type LR-44 or SH-44
300.04 +4.0%rdg(20~1kHz) Accessories Two LR-44 button cell
DC 40A 0-+40.00A | +1.0%rdg+4dgt Carring Case Model 9090
Current xs ET CRETE Instruction Manual
Auto 300A 0- 52
eo) san EEE Options Model 8004,8008(Multi Trans)
a % These Multi-Trans can not be used
+200.0~ +3.0%rdg for DC current measurement.
+300.0A Model 8021(Energizer)
BMiniature Clamp Meter Series
'KEW SNAP Y AC LEAKAGE MINI CLAMP METER KEW SNAP AC MINI CLAMP METER
20A/200A AC
20mA/200mA/200A AC
MODEL 2431 MODEL 2031
#2)
FEATURES
- Freguency Selector Switch to eliminate
the effect of harmonics,
- Data hold function.
- Auto power-off function.
$2)
FEATURES
- Designed to International safety
standard IEC61010-1 CAT.II 300,
+ Data hold function.
+ Auto power-off function,
Dimensions 147(L) *58.5(W)* 26(D}mm
Weight Approx. 100g(batteries included)
Power Source | 1.5V button cell X 2 type LA-44
| Dimensions | 149(L) X60(W) X 26(D)mm
| Weight Approx.120g(batieres included)
| Power Source | 1,5V button cell X 2 type LR-44
A Safety Warnings
Please read the "Safety Warnings” in the instruction manual supplied with the instrument thoroughly and
completely for correct use.
Failure to follow the safety rules can cause fire, trouble, electrical shock, etc. Therefore, make sure to operate
the instrument on a correct power supply and voltage rating marked on each instrument.
*The contents of this catalogue may be subject to change without notice.
AT KYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD.
No.5-20 Nakane 2-chome, Meguro-ku, Tokyo, 152-0031 Japan
Phone:(03)3723-0131 Telex:0246-6703 Fax:(03)3723-0152
E-Mail:kew@sh0. po.lijnet.or. ip
Cable Address: "KYORITSUKEIKI” TOKYO
A Factories:Uwajima & Ehime
99.02F PRINTED IN JAPAN
">