User guide | Zip CH103 Product guide

The Zip Product Guide

2015

The complete range of Zip products

G4

CH

NOLOGY

TE

TE

G4

Y

G4

TECHNOLOGY

Including the innovative, exciting

TECHNOLOGY

G4

TECHNOLOGY

HydroTap G4

TE

G4

CHNOLOG

Y

www.zipheaters.co.uk

Version 2

Introduction

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y

Training

Zip’s experienced team of Training

Managers offer bespoke product training geared to the needs of

Installers, Specifiers and Facility

Managers.

These ‘hands on’ sessions typically take place on site, or in one of

Zip’s specially designed training centres, covering all relevant product installation, servicing and maintenance issues.

Additionally a choice of RIBA accredited CPD programmes are available for those involved in the specification of boiling, chilled or hot water products

2

Thank you for considering a Zip product. Whichever one you choose, you can be quite certain of one thing - nobody offers you a more advanced boiling, chilled, sparkling water system for your project, because nobody knows instant boiling water like Zip. We also lead the way in the UK development of instantaneous hot water products.

Today millions of people around the world use Zip instant boiling water systems each day in homes, public buildings, hospitals, schools, offices and factories in more than sixty countries.

Zip remains world leader in instant boiling water, setting the pace in time-saving, energy-saving, water-conserving and user-safety technology.

You can be confident that the Zip product you choose is a sound investment, because it is by far the best of its kind, designed to save you time, energy and money every day and for many years to come.

Prompt service

Zip HydroTap is better designed, better built and better backed than any comparable boiling and chilled filtered water system and is designed to give many years of service. However, like any appliance, it may need attention from time to time to keep it in top operating condition. To provide prompt service in any location, Zip has established a team of national, fully trained, directly employed, service engineers covering the whole of the UK – for installation, repairs or routine periodic maintenance.

In the Greater London area (within the M25) we offer a same day service, providing that the call is made before mid-day. Other areas may take a little longer.

3

4

NEW for 2015

The new Zip HydroTap G4

The world’s most advanced drinking water system

Boiling

|

Chilled

|

Sparkling

|

Filtered

|

Instantly

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

G4

TECHNOLOGY

Y

Product Index

Drinking Water - Boiling

HydroTap G4

HydroTap technology

HydroTap commercial overview

HydroTap filtered boiling, chilled and sparkling,

HydroTap filtered boiling and chilled

HydroTap filtered boiling

HydroTap filtered chilled

HydroTap 3-in-1, 4-in-1 and 5-in-1

HydroTap All-in-One

HydroTap Industrial

HydroTap for the home

HydroTap optional extras

HydroTap filtration

Wall mounted

Hydroboil Plus

Hydroboil

Econoboil

Duo

Accessories

Drinking Water - Chilled

HydroTap

ChillTap & ChillTap Extra

Chillmaster

Wall Fountain

Chill Fountain

Chilled water for the home

Accessories

Hot Water

InLine Instantaneous - ES; CEX; DBX; DEX

Unvented - Aquapoint 5 to 15 litres

Unvented - Varipoint 10 & 15 litres

Unvented accessories

Unvented - Aquapoint 30 to 100 litres

Unvented - Varipoint 30 to 100 litres

Stainless steel unvented - AquaFlo

Open outlet vented - Contract

Open outlet vented - Tudor

Flatback storage - RCH

General data

40-41

42-43

44-45

46-47

48-49

50-53

54-55

56-57

58-59

60-63

64-65

66-67

68-79

80-81

82-83

84-85

86-87

88-89

90-93

94-95

96-97

98-99

100-101

6-7

8-9

10-11

12-13

14-15

16-17

18-19

20-21

22-23

24-25

26-29

30-31

32-33

34-35

36-37

38-39

5

Zip HydroTap

®

The most intelligent filtered drinking water system ever invented

Zip Heaters’ policy of continual product development has resulted in the most advanced, energy saving, time saving product providing instant filtered, boiling, chilled and sparkling drinking water

The Zip HydroTap G4

G4

TECHNOLOGY

G4

TECHNOLOGY

G4 G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Y

6

Zip brings you the most intelligent filtered drinking water tap ever invented.

New under-sink Zip Command-Centre units are more compact

than ever before and all connection points are now push-fit and at the rear, reducing installation time. A front access door makes changing the filtration cartridge as simple and quick as replacing a light bulb.

Advanced insulation and electronics technology reduces standby energy consumption substantially over earlier Zip models of similar capacity, by up to 53%.

Auto-calibrates to boiling point upon installation, regularly re-calibrates and optimises performance.

Simple pin-code-protected touch-screen puts managers in total control of each appliance.

Adjustments include temperature, dispensing time, safety settings and energy-saving settings.

Continuous auto-diagnostics system monitors performance and provides total history on demand.

Integral cross-ventilation system eliminates cupboard heat-up with no need for an external fan.

Multiple filter life settings, with precise litre monitoring, to optimise filter replacement timing.

Added peace-of-mind features include overload protection, temperature monitoring, internal leak detection, plus an internal pressure limiting valve.

■ Adjustable water temperature: boiling water 100 o C to 68 o C, factory set at 98 o C for optimum results. Chilled water 5 o C to 13 o C.

■

Power-Pulse

TM

electronic technology controls the set boiling temperature within 0.2

o C and eliminates overboil.

■

Choice of fingertip control for fast cup filling (lever down) or hands-

free pot filling (lever up).

■ Can be set to require finger-thumb safety operation for boiling water access, eliminating the risk of accidental use. Can also be set to boiling

isolation mode for increased safety.

■

Longer spout caters for under-mount sinks. Extended lever & Braille pads also available.

■ Energy saving technology

•

Low-energy lights signal boiling water is ready, chilled is ready, or filter change is due.

•

Hidden light sensor sends appliance to sleep, to conserve energy when the room goes dark.

•

Sleeps or powers off after 2 hours of non-use.

•

Plus 24/7 on/off timer, allowing power to be turned off, automatically, for weekday or weekend periods.

7

Zip HydroTap

®

technology

Superior technology saves energy and conserves water

G4

G4

TE

CHNOLOG

Y

Zip HydroTap

®

sustainability

G4

G4

TECHNOLOGY

G4

TE

G4

CHNOLOG

Y

8

Power-Pulse™ energy saving technology

Reduces power consumption by allowing the system to regulate its power during periods of high and low usage.

This saves energy whilst maintaining the tightest possible temperature control.

Automatically calculates boiling point

Because boiling temperature varies by altitude, Zip

HydroTap pinpoints boiling point during installation and sets it accordingly.

Sleeps when inactive

The system can be pre-set to power down after 2 hours of non-use, but will still retain stored ‘boiling’ water at an energy saving 64°C, or can also be set to hibernate

(power off completely). The system quickly recovers to the pre-set boiling temperature upon further draw-off.

Programmable 24/7 timer

Pre-set the ‘power on’ and ‘power off’ times

(once a day) for those periods when the Zip HydroTap will not be used, such as overnight or at weekends (for commercial users).

Cuts down water wastage, too

Every drop of water is dispensed at the set temperature, so there is, no longer any need to waste water running a tap until the water is at the correct temperature

Conserves water

New, improved air-cooled system, with integral cross-ventilation, does not dump water to waste. An environmentally responsible solution.

Conserves energy

Choice of four energy-saving settings to allow installers or site managers to adjust each set-up to operate with optimum energy efficiency.

RoHS Compliant

All materials involved in Zip HydroTap manufacturer comply with the European Restriction of Hazardous Substances Directive

2011/65/EC

WRAS Approval

All Zip HydroTap G4 commercial products carry the WRAS (Water

Regulations Advisory Scheme) accreditation.

Standing heat-loss energy consumption comparison

(tests for a 24 hour period with no draw-off)

Example G3 models

Energy used

(Watts)

Example G4 models

Energy used

(Watts)

Energy saved

BC100/125

BC150/175

60.6

74.5

BC160/125G4

BC240/175G4

34

36.2

44%

51%

N.B. When the sleep mode facilities were activated on both the G3 and G4 models, the

G4 showed a 53% stand-by energy saving over the superceded G3 models.

9

10

Zip HydroTap

®

range

General Information—Commercial HydroTap

Tap head

Chrome plated, die cast tap body with push and pull levers.

Integral safety lock and LED indicators. It can be mounted at the sink or on the optional font and drain (see page 31)

D.D.A. options

Oversize tap levers. Braille covers

Control panel

Located on undercounter unit for programming sleep mode, timer, water temperature and water delivery. (see page 7)

Filtration system

Integral triple-action 0.2 micron encapsulated cartridge.

Safety features

Child-proof interlock on tap.Boiling isolation mode.

Undercounter safe tray with leak detector.

Pin-code protection.

Finishes

Available in Bright Chrome

(standard), Satin Chrome, Gloss

Black and Matt Black.

Approvals

WRAS. CE endorsed.

Warranty

2 years on site parts and labour with additional 3 years on the boiling tank. For full details visit: www.zipheaters.co.uk/warranty

Plumbing

The water supply must be potable (drinkable).

If static pressure exceeds 7 bar, a pressure reducing valve must be fitted.

An isolating valve should be installed between the water supply and the unit.

Venting

The cupboard housing the unit must be amply ventilated as per the installation manual.

Electrical

To be wired to a double pole switched fused spur with a minimum break capacity of 13 amp.

If the booster sytem is used it must be connected to a separate fused spur.

Installation must comply with current IEE regulations.

3 metre power cable provided.

Caution

In some hard water areas where scale is an issue we recommend the fitting of one of the Zip Professional range of scale filtration systems.

(See page 33).

116mm CL reach

308 mm

232 mm

207 mm

125 mm

46 mm

HydroTap sink mounted

HydroTap font mounted

104 mm

219 mm

G4

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Zip HydroTap

®

range

The wide range of products available

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y

TEC

G4

HNOLOG

Y

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY Boiling, chilled & sparkling

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Y

Boiling only

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y

G4

G4

TEC

HNOLOG

Boiling & ambient

TEC HNOLOGY

TEC

HNOLOGY

TECHNOLOGY

TECHNOLOGY

TECHNOLOGY

TECHNOLOGY

TECHNOLOGY

TECHNOLOGY

TECHNOLOGY

TECHNOLOGY

TEC

G4

HNOLOG

HNOLOG

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

Boiling & chilled

TECHNOLOGY

TEC

G4

HNOLOG

Y

Chilled only

G4

TEC

G4

HNOLOG

3-in-1,4-in-1

&

5-in-1

All-in-One Industrial

&

Custodial

For the Home

11

Zip HydroTap

®

Boiling, chilled and sparkling filtered water

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Y

12

Features & benefits

• Simple to operate, and with more safety features than ever.

• Press red lever for boiling water, however, if safety interlock is activated, press red lever and safety button at the same time.

• Press the blue lever to fill a glass, jug or bottle with chilled filtered water.

• Press both red and blue levers together for sparkling chilled filtered water.

• Lift either lever to run water for any pre-set period of 5 to

15 seconds.

• Boiling water can be isolated, if needed, during periods when your HydroTap is unattended.

• Smarter technology cuts power consumption dramatically.

• Power-Pulse™ controls power phasing to cut energy costs.

• Sleeps or powers off after 2 hours of non-use.

• 24/7 on/off weekly timer to save energy when HydroTap is not in use.

• BCS100/75G4 and

BCS160/175G4 can be upgraded, retrospectively, if additional boiling water capacity is required, by installing the booster unit

SP91412.

• Can be mounted at the sink or on the optional font and drain (see page 31).

Capacity choice options

BCS100/75G4.

BCS160/175G4

Boiling system

Open outlet, vented; factory set to operate at 98°C.

Chilling system

Fan-cooled condenser type, factory set to operate at 5-13°C.

Flow rate - Chilled 3.0 l/min

Sparkling 1.5 l/min

Refrigerant R134A.

Temperature settings

The boiling temperature can be adjusted from 100°C to 68°C.

Factory set at 98°C.

Flow rate - 4.0 l/min

Finishes

These models are available in 4 tap finishes:

Bright Chrome (standard)

Gloss Black

Matt Black

Satin Chrome

Matching fonts are also available

See page 31 for details.

N.B.

For general installation and specification details of the

HydroTap G4 range see page 10.

Visit www.zipheaters.co.uk/ downloads

Under-counter Command Centre

BCS100/75G4 & BCS140/75G4

Product Code

BCS100/75G4

BCS140/75G4 *

(including booster unit)

BCS160/175G4

BCS240/175G4 *

(including booster unit)

Maximum boiling cups/hour

100

140

160

240

Maximum chilled / sparkling glasses/hour

75

75

175

175

BCS160/175G4 & BCS240/175G4

Power rating kW@230V

Dimensions

W x D x H

(mm)

2.15

280 x 470 x 335

2.15 + 2.2

280 x 470 x 335

2.30

450 x 470 x 335

2.30 + 2.2

450 x 470 x 335

*

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted, booster unit and must be connected to two separate 13 amp power supplies.

13

14

Zip HydroTap

®

Boiling and chilled filtered water

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y




• Press the blue lever to fill a glass, jug or bottle with chilled filtered water.

• Lift either lever to run water for any pre-set period of 5 to

15 seconds.



• Power-Pulse™ controls power phasing to cut power costs.

• Sleeps or powers off after 2 hours on non-use.


• BC100/75G4 and

BC160/175G4 can be upgraded, retrospectively, if additional boiling water capacity is required, by installing the booster unit

SP91412

• Can be mounted at the sink or on the optional font and drain (see page 31)


BC100/75G4.

BC160/175G4

Boiling system




Chilling system



Refrigerant R134A.

Finishes



Gloss Black

Matt Black

Satin Chrome


See page 31 for details

N.B.



Visit www.zipheaters.co.uk/ download


BC100/75G4 & BC140/75G4

BC160/175G4 & BC240/175G4

Product Code

BC100/75G4

BC140/75G4*

BC160/175G4

BC240/175G4*

Maximum boiling cups/ hour

100

140

160

240

Maximum chilled glasses/ hour

75

75

175

175


2.05

Dimensions

W x D x H

(mm)

280 x 470 x 335

2.05 + 2.20

280 x 470 x 335

2.20

450 x 470 x 335

2.20 + 2.20

450 x 470 x 335

*

These Zip HydroTap G4 models are installed with a 2.2kW, externally mounted booster unit and must be connected to two separate 13 amp power supplies.

15

16

Zip HydroTap

®

Filtered boiling (B models)

& filtered boiling and ambient water (BA models)

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Y




• For boiling ambient models right hand blue lever for filtered ambient water.

• Lift lever to run water for any pre-set period of 5 to 15 seconds.



• Power-Pulse™ controls power phasing to cut power costs.

• Sleeps or powers off after 2 hours on non-use.


• B160G4 and BA160G4 can be upgraded, retrospectively, if additional boiling water capacity is required, by installing the booster unit

SP91412



B160G4 - filtered boiling ambient

Boiling system




Ambient supply

Free-flow, mains pressure, at incoming water temperature

Finishes



Gloss Black

Matt Black

Satin Chrome



N.B.




Boiling and ambient tap


Boiling only tap

Boiling/ambient Boiling only

Product

Code

BA160G4

BA240G4*

B160G4

B240G4*

Maximum boiling

cups/hour

160

240

160

240

Maximum ambient glasses/hour

Free Flow

Free Flow

N/A

N/A


Dimensions

W x D x H

(mm)

1.90

280 x 313 x 335

1.90 + 2.20

280 x 313 x 335

1.90

280 x 313 x 335

1.90+ 2.20

280 x 313 x 335

*


17

18

Zip HydroTap

®

Filtered chilled and sparkling water

Features and benefits

• Provides chilled filtered water instantly.

• Provides chilled and sparkling fitered water instantly.

• No need for expensive and environmentally damaging bottled water.

• No need to store and handle bottled water.

• Free-Flow system means no fear of running out of drinking water in extreme weather conditions.


Choice options

C175G4 - Chilled only

CS175G4 - Chilled and Sparkling

Chilling system


Flow rate - Chilled 3.0 l/min

Sparkling 1.5 l/min

Refrigerant R134A.

Finishes



Gloss Black

Matt Black

Satin Chrome



N.B.


HydroTap range see page 10.

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Y


Product Code Maximum chilled glasses/hour


C175G4

CS175G4

175

175

0.30

0.45

Dimensions

W x D x H

(mm)

336 x 476 x 335

336 x 476 x 335

19

20

Zip HydroTap

®

3-in-1, 4-in-1 & 5-in-1

Boiling, chilled and sparkling filtered drinking water PLUS hot, cold (ambient) or mixed warm water – from two taps


Offers all of the advantages of a standard HydroTap plus these additional 4 benefits.

• Provides hot water at 50°C

to the mixer tap (supplied)

and either boiling, chilled and

sparkling (5-in-1), or boiling and

chilled (4-in-1) or boiling or

boiling and ambient (3-in-1)

to the HydroTap.

• Saves the cost of a separate

hot water supply.

• Saves space.

• Conserves energy.

Choice options

See table on page 21

N.B.The above units are supplied, as standard, with the classic mixer tap. Alternative mixer taps (the square and the Tall) are also available.


Refrigerant R134A.

Mixer Flow

The mixer tap will deliver up to

3ltr/min, ideal for rinsing cups and handwashing.

Mixer Taps

The mixer tap is available in three types:

Classic

Square - add S to the product order code

Boiling system



Factory set at 98°C.


Chilling system


Tall - add T to the product order code


G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y

5-in-1 provides filtered boiling, chilled and sparkling water delivered through the HydroTap

PLUS hot and cold (ambient) through the mixer tap.

4-in-1 provides filtered boiling and chilled (or ambient) water delivered through the

HydroTap PLUS hot and cold (ambient) through the mixer tap.

3-in-1 provides filtered boiling water delivered through the HydroTap PLUS hot and cold

(ambient) through the mixer tap.

Product Code Maximum boiling cups/hr

Maximum chilled glasses/hr


3-in-1 (filtered boiling PLUS hot and cold through a separate mixer)

BH160G4 160 N/A 1.90

Dimensions

W x D x H

(mm)

BH240G4* 240 N/A 1.90 + 2.20

280 x 313 x 335

280 x 313 x 335

4-in-1 (filtered boiling & chilled PLUS hot & cold through a separate mixer)

BCH160/175G4 160 175 2.20

450 x 470 x 335

BCH240/175G4* 240 175 2.20+ 2.20

450 x 470 x 335

4-in-1 (filtered boiling & ambient PLUS hot & cold through a separate mixer)

BAH160G4 160 N/A 1.90

280 x 313 x 335

BAH240G4* 240 N/A 1.90 + 2.20

280 x 313 x 335

5-in-1

(filtered boiling, chilled & sparkling PLUS hot and cold through a separate mixer)

BCSH160/175G4 160 175 2.30

450 x 470 x 335

BCSH240/175G4* 240 175 2.30 + 2.20

450 x 470 x 335

*


5-in-1 4-in-1 3-in-1

21

22

Zip HydroTap

®

All-in-One

(Commercial)

Boiling, chilled and sparkling filtered drinking water PLUS hot, cold (ambient) or mixed warm water – all from one tap


• Offers all of the advantages of a standard HydroTap plus these additional benefits.

• Replaces mixer taps to declutter and simplify kitchen design.

• Vented systems save space, cost and energy by eliminating the need for a separate hot water supply.

• Separate drinking water controls for convenience and safety.

• Vented and non-vented systems available.

Choice options

See table on page 23

Finishes

This model is available in 4 tap finishes:


Gloss Black

Matt Black

Satin Chrome



Boiling system




Chilling system



Refrigerant R134A.

Mixer Flow

The mixer tap will deliver up to

3ltr/min, ideal for rinsing cups and handwashing.

Tap head

Long reach spout swings through

120° to make use at the sink, for washing up, much easier.


G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y

For 160/175 & 240/175 models For 100/75 & 140/75 models

Product Code Maximum boiling cups/ hour


Boiling & chilled with non-vented mixer tap (hot & cold feed)


AN100/75G4

AN140/75G4

*

AN160/175G4

100

140

75

75

2.05

2.05 + 2.20

160 175 2.20

AN240/175G4

*

240 175 2.20 + 2.20

Boiling & chilled with vented mixer tap (cold feed only - no hot supply needed)

AV100/75G4

AV140/75G4

*

AV160/175G4

100

140

75

75

2.05

2.05 + 2.20

160 175 2.20

AV240/175G4

*

240 175 2.20 + 2.20

Boiling, chilled & sparkling with non-vented mixer tap (hot & cold feed)

Dimensions

W x D x H

(mm)

280 x 470 x 335

280 x 470 x 335

450 x 470 x 335

450 x 470 x 335

280 x 470 x 335

280 x 470 x 335

450 x 470 x 335

450 x 470 x 335

SAN100/75G4

SAN140/75G4

*

SAN160/175G4

100

140

75

75

2.15

2.15 + 2.20

160 175 2.30

SAN240/175G4

*

240 175 2.30 +2.20

Boiling, chilled & sparkling with vented mixer tap (cold feed only - no hot supply needed)

280 x 470 x 335

280 x 470 x 335

450 x 470 x 335

450 x 470 x 335

SAV100/75G4

SAV140/75G4

*

100

140

75

75

2.15

2.15 + 2.20

280 x 470 x 335

280 x 470 x 335

SAV160/175G4 160 175 2.30

450 x 470 x 335

SAV240/175G4

*

240 175 2.30 + 2.20

450 x 470 x 335

*


23

24

Zip HydroTap

®

in Industry

Heavy duty designs for industrial environments and institutions


Offers all of the advantages of a standard HydroTap plus these additional benefits.

Super strong tapered shank anchor (side touch models).

Damage-resistant side or top touch buttons.

Simple 2-button without safety lock.

Optional 3-button with safety lock.

Can be installed R/H or L/H.

Up to 240 boiling cups per hour.

Up to 175 chilled glasses per hour.

Side touch variant (primarily for use in high security locations, such as prisons)) has a high strength tapered base which fastens to an undersink clamp block with a reinforcing spine.

Choice options

See panel on page 25

Boiling system




Chilling system



Refrigerant R134A.

Tap Head

Chrome plated.

N.B.


HydroTap range see page 10.


G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TEC

HNOLOG

Y


Product Code Maximum boiling cups/ hour

Side-touch model

IS160/175G4

IS240/175G4*

Top-touch model

160

240

IT160/175G4

IT240/175G4*

160

240



175

175

175

175

2.20

2.20 + 2.20

450 x 470 x 335

2.20

2.20 + 2.20

Dimensions

W x D x H

(mm)

450 x 470 x 335

450 x 470 x 335

450 x 470 x 335

25

26

Zip HydroTap

®

for the Home

Instant boiling, chilled and sparkling filtered water systems for home kitchens, large and small, traditional or contemporary.

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

Now available with new G4 technology.

TEC

G4

HNOLOG

Y


• No more waiting for water to boil.

• No more bottled water to buy.

• Easy to use.

• 0.2 micron filtration for great tasting healthy water.

• Scale management filter option.

• Can be sited next to sink or on optional font and drain.

• Both the boiling and chilled water systems are pumped for correct water temperature delivery, plus no wasted water.

• Even more energy efficient.

• Integral child safety lock.

• Tap levers can be ‘locked’ for filling of large vessels.

• Measured dispense when levers are in upright position.

• Power-pulse energy saving technology.

• Sleep mode to save power.

• Integral 24/7 timer.

Models available

Boiling, chilled and sparkling filtered water.

Boiling and chilled filtered water.

Boiling and cold (ambient) filtered water.

Boiling filtered water.

Chilled filtered water.

All-in-One model with boiling, chilled,hot and cold water and now sparkling from one tap.

4-in-1, providing boiling and chilled water, hot and cold water to separate mixer tap (provided).

See options on page 20.

Taps

All taps, except for the

DOMSAN4, DOMAN4,

DOMHBH4, DOMBAH4.

DOMBCH4 and DOMBCSH4 models are available with the option of different finishes to the standard chrome. (See page 31)

The separate mixer tap is available in three types. (See page 20).

Warranty

3 years on site parts and labour with additional 3 years on the boiling tank. For full details visit: www.zipheaters.co.uk/warranty

On sink installation Installation using the optional font and drain


Product

Code

Boiling Chilled Sparkling

DOMBCS4

DOMBC4

DOMSAN4

DOMAN4

DOMBA4

DOMHB4

DOMCS4

DOMC4

DOMHBH4

DOMBAH4

DOMBCH4

DOMBCSH4

Yes

Yes

Yes

Yes

Yes

Yes

No

No

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Ambient

No

Yes

Yes

No

Ambient

Yes

Yes

Yes

No

Yes

No

No

No

Yes

No

No

No

No

Yes

Hot & cold

(for mixer facility)

No

No

Yes - with integral mixer.

Requires hot and cold feeds

Yes - with integral mixer.

Requires hot and cold feeds

No

No

No

No

Yes - with separate mixer tap




Dimensions

W x D x H

(mm)

280 x 470 x 335

280 x 470 x 335

280 x 470 x 335

280 x 470 x 335

280 x 313 x 335

280 x 313 x 335

280 x 389 x 335

280 x 389 x 335

280 x 470 x 335

280 x 470 x 335

280 x 470 x 335

280 x 470 x 335

27

Zip HydroTap

®

Miniboil Classic & Elite

Super compact economy models for filtered boiling and filtered cold (ambient) water for the home

Models available

• Boiling and cold (ambient)

filtered water with Classic tap.

• Boiling and cold (ambient)

filtered water with Elite tap.


• No more waiting for water to

boil.

• Easy to use touch pads.

• 0.2 micron filtration for great

tasting healthy water.

• Scale management filter option.

• Can be sited next to sink or on

optional font and drain.

• Inactivity sleep mode.

• Filter change indicator.

• Cool-touch tap.

• Compact size makes it ideal

for kitchens with limited space.

• Highly energy efficient.

• Safety interlock.

• Power-Pulse™ technology.

Filtration

Supplied with external triple action 0.2 micron filter.

Additional anti-scale filtration option.

Warranty

12 months on site parts and labour warranty. These products are designed for use in domestic environments and their use commercially may invalidate the warranty

Visit www.zipheaters.co.uk/ download

Zip Miniboil Elite

28

Zip Miniboil Classic Miniboil shown font mounted

Product

Code

MB1BA

MB2BA

Tap style Boiling

Classic

Elite

•

•

Ambient

•

•

Rating

(kW@230V)

1.5

1.5

Dimensions

W x D x H mm

212 x 272 x 338

212 x 272 x 338

29

Zip HydroTap

®

Options

Finishes

Traditional Zip HydroTap and fonts are available in standard Bright chrome and a choice of three additional finishes.

Not available for Industrial, 3-in-1, 4-in-1 and 5-in-1 models.

Gloss Black

Add ‘B’ to normal code when ordering.

Matt Black

Add ‘M’ to normal code when ordering.

30

Satin Chrome

Add ‘S’ to normal code when ordering.

Font and Drain*

Zip HydroTap can be ordered with a matching font and drain for mounting remotely from the sink.

Order Codes:

ZT008 – Standard Chrome

ZT009 – Satin Chrome

ZT010 – Gloss Black

ZT012 – Matt Black

*Not for use with All-in-One.

Drainless Font

For locations where there is no available drainage, the Zip “Drainless

Font” system ensures the safe and effective collection of waste water from a HydroTap font.

Order Code: ZT006

Over sized levers

All HydroTap models, except for models in the All-in-One, Industrial and Miniboil ranges, can be fitted with oversize levers to assist those with restricted dexterity.

Order Codes: Add ‘ D ’ to normal order code

Braille covers

To aid those with sight issues Braille covers can be fitted to these levers.

Order Codes:

SP99910 – Boiling/chilled

SP99911 – Boiling only

SP99912 – Chilled only

Sparkling consumables

Order Codes:

ZT400 – CO

2

ZT401 – CO

2

canister (single).

regulator

31

32

Zip HydroTap

®

Filtration

All HydroTap products NOW feature .02 micron filtration

New Zip 0.2 micron filters reduce chlorine taste and odour, filtering out particles more than one fifth of a micron in size

– that’s one five-thousandth (1/5000th) of a millimetre – twenty five times finer than commonly used 5.0 micron filters, designed to filter out both Cryptosporidium and Giardia cysts and other impurities, for crystal-clear great-tasting water and healthier drinking.

This is arguably the most advanced and most practical water filtration system available anywhere today, developed to meet our exacting specifications by the world leader in water filter technology.

Zip 0.2 micron filter cartridges are incorporated into the Zip HydroTap installation under the sink, or out of sight within the Zip HydroTap command-centre installed beneath the tap.

Zip 0.2 micron filter cartridges are hygienically encased for fast and easy filter cartridge replacements. A white light on the tap will flash to indicate that the filter requires changing.

Scale Management

Recommended for use when the water hardness level is above 4 degrees Clark

(60 parts per million CaCO3).

• Triple action filtration

• Ion exchange resin to

reduce water hardness

• Carbon block to improve

taste and odour

• High efficiency filtration to

remove particulates

• Choice of four filters to suit

various applications

• Can be installed horizontally if

required using optional

bracket

Choice of four filters:

• FL1100 with submicron

filtration for domestic use.

• FL2300 with one micron

filtration for light commercial use.

• FL3600 with one micron

filtration for normal

commercial use.

• FL6000 PLUS with one

micron filtration for heavy

commercial use.

• For initial installation each filter

has a dedicated installation

kit, which includes the

head, all necessary push

fit components.

The Order Codes are:

FL1100G4 KIT

FL2300G4 KIT

FL3600G4 KIT

FL6000G4 PLUS KIT

Zip Professional Range

High performance limescale filtration system for use with Zip HydroTap

UK Scale map

Hard to very hard

Medium hardness

Soft

Zip HydroTap ‘filter change light’ flashes when a filter change is due. It can be set to measure both water volume and the number of days in service, signalling whichever occurs first.

N.B. Check with local water authority for accurate data

33

34

Overview

Wall mounted instant boiling water

Zip Hydroboil

Zip Hydroboil

Zip Econoboil

Plus

Instant boiling water heaters are essential appliances for the workplace and are available in the widest range of models and capacities.

Saves time

No more time wasted waiting for water to boil—Zip delivers boiling water instantly, at the touch of a tap.

Saves energy

No energy is wasted boiling more water than needed—fingertip control gives a cup full or teapot full at a time.

Saves space

No cluttered worktops—Zip instant boiling water eliminates the need for kettles and exposed power leads.

Saves money

Costs little to run—thanks to energyefficient design and electronic controls

(Hydroboil Plus) to minimise power consumption.

Sets a new standard

Every working day in the UK over eight million cups of tea and coffee are made using Zip instant boiling water systems.

Temperature control

Zip’s patented high precision temperature control systems are designed to keep the boiling water within one degree of the set temperature. This means that boiling water and only boiling water is delivered.

Ranges

Zip offers a choice of three ranges:

Hydroboil Plus

Thermostatically controlled, twin chamber technology with stainless steel boiling tank.

Premium insulation and cool touch two way tap with safety lock.

Energy saving Power-Pulse™

Sleep mode - after 2 hours of no demand or when lights turned off.

Integral 24 hour 7 day timer.

Available in sizes from 3.0 to 40.0 litres.

White or stainless steel finishes.

Hydroboil

Thermostatically controlled, twin chamber technology with stainless steel boiling tank.

Premium insulation and chrome catering style tap.

Available in sizes from 1.5 to 40.0 litres.

White or stainless steel finishes.

Econoboil

Thermostatically controlled, twin chamber technology with copper boiling tank.

Tontine insulation.

Chrome catering style tap.

Available in 3.0 & 5.0 litres.

White finish.

Zip Hydroboil Plus cuts energy consumption in 5 ways

Steam-Heat-Boost System

Steam from boiling water is recycled to pre-heat incoming cold water.

A patented metering tube maintains the stored water within 1°C of set temperature.

Power-Pulse™ energy saving technology

Applies full power only during heavy usage periods cutting back to micropulse power during light usage or when unused — not available on 40 litre model.

Inactivity sleep mode

After 2 hours of non-use Hydroboil Plus enters sleep mode, allowing the water temperature to reduce to 65° at which it is maintained until next draw-off.

Low light sleep mode

When activated, an integral light detector activates this facility when room light is switched off and the unit enters sleep mode as above.

Integral 24 hour 7 day timer

Switches system off during known periods of inactivity, returning to full functionality ahead of next expected demand.

35

36

Zip Hydroboil Plus


3, 5, 7.5, 10, 15, 25, 40 litre

Heating element

Long-life incoloy sheathed embedded rod type. Dry start protection.

Boiling chamber

Twin chamber-stainless steel. Steam-Heat-

Boost technology. Crevice-free stainless steel with removable access ports, top and bottom.

Insulation

Compressed high temperature insulation panels on sizes below 10 litres, engineered for easy boiling chamber access. High efficiency aluminium backed mineral wool insulation on other sizes.

Thermostat

Thermistor controlled.

Case

Stainless steel or corrosion-resistant, white enamelled steel.

Temperature Settings

On installation, to suit user needs, the boiling water temperature can be adjusted from

100˚C to 68˚C.

Control Panel

Liquid Crystal Display shows time, day, heater operation and energy saving mode status.

Installation

Install over a draining board, or work top fitted with a drip tray. Tap spout should be no higher than necessary to fill large pots.

Minimum tap height above draining board for on-wall fitting is 200mm.

Plumbing

Designed for direct connection to a potable cold water supply with a minimum pressure of 0.7 bar. If pressure exceeds 7 bar a pressure limiting valve must be fitted. An isolating valve should be installed between the water supply and the heater.

Concealed plumbing

Connect inlet and vent pipes from the rear via

15mm capillary elbows.

Exposed plumbing

Connect inlet and vent pipes from below directly to 15mm compression fittings.

Venting

The vent must discharge to a safe visible position using a tundish.

Electrical

To be wired to a double pole fused spur with a minimum break capacity of 13 amps.


Caution

In some hard water areas where scale is an issue we recommend the fitting of the Zip

Inline filter.

Tap

Unique two-way cool touch tap.

Safety features

Integral safety lock.

Approvals

WRAS, CE endorsed.

Warranty

Two-year on site parts and labour. For full details of the Zip Warranty visit: www.

zipheaters.co.uk/warranty

Energy Conservation

The installer can select one of two programmable energy

saving modes –

Integral 24 hour 7 day timer enables the unit to switch off automatically

during known periods of inactivity e.g. overnight or at weekends, returning

to full functionality ahead of the next expected demand.

Sleep Modes

Inactivity Sleep Mode. Following a period of 2 hours non-use

Hydroboil Plus automatically enters sleep mode when the unit powers

down allowing the water temperature to gradually reduce to 65˚C, at

which it is maintained. Upon further draw off boiling resumes.

and/or

Low light Sleep Mode. An integral light detector automatically

activates sleep mode (as above) when room lights are switched off,

returning to normal operation when the next draw off occurs or the

lighting is switched back on.

Zip Hydroboil Plus with cool touch tap an energy saving features

Product Code

Case Finish s/steel white

HP103 HP003

HP105 HP005

HP107 HP007

HP110 HP010

HP115 HP015

HP125 HP025

HP140 HP040

*

Standard cup size 167ml

Capacity litres

3.0

5.0

7.5

10.0

15.0

25.0

40.0

Delivery cups* at any one time

18

30

45

60

90

150

240

Recovery cups* per hour

100

140

140

180

180

180

240

Rating kW@230V

1.5

2.4

2.4

3.0

Dimensions

W x D x H

(mm)

289 x 180 x 431

318 x 198 x 465

318 x 198 x 578

390 x 244 x 600

3.0

3.0

390 x 299 x 600

390 x 299 x 780

2 x 3.0

515 x 284 x 840

37

38

Zip Hydroboil

®


1.5, 3, 5, 7.5, 10, 15, 25, 40 litre

Heating element

Long-life incoloy sheathed embedded rod type.

Dry start protection.

Boiling chamber

Twin chamber-stainless steel.

Steam-Heat-Boost technology.

Crevice-free stainless steel with removable access ports, top and bottom.

Insulation

Compressed high temperature insulation panels on sizes below 10 litres, engineered for easy boiling chamber access. High efficiency aluminium backed mineral wool insulation on other sizes.

Thermostat

Capillary type.

Case

Stainless steel or corrosion resistant white enamelled steel.

Tap

Two way, chrome-plated classic, catering style.

Approvals

WRAS, CE endorsed.

Warranty

Two-year on site parts and labour. For full details of the Zip Warranty visit: www.zipheaters.co.uk/warranty

Installation

Install over a draining board, or work top fitted with a drip tray. Tap spout should be no higher than is necessary to fill large pots. Minimum tap height above draining board for on-wall maintenance is 200mm.

Plumbing

Designed for connection to a potable cold water supply with a minimum pressure of 0.7 bar. If pressure exceeds 7 bar a pressure limiting valve must be fitted.

An isolating valve should be installed between the mains supply and the system.

Concealed plumbing

Connect inlet and vent pipes from the rear via

15mm capillary elbows.



Venting

The vent must discharge to a safe and visible position using a tundish.

Electrical

To be wired to a double pole fused spur, minimum break capacity of 13 amps.


Caution


Inline filter.

Zip Hydroboil with Classic tap

Product Code


-

-

HS001

HS003

HS105 HS005

HS107 HS007

HS110 HS010

HS115 HS015

HS125 HS025

HP140 HP040

*


1.5

3.0

5.0

7.5

10.0

15.0

25.0

40.0

Capacity litres


9

18

30

45

60

90

150

240


100

100

140

140

180

180

180

240

Rating kW@230V

3.0

3.0

3.0

1.5

1.5

2.4

2.4

Dimensions

W x D x H

(mm)

289 x 180 x 335

289 x 180 x 431

318 x 198 x 465

318 x 198 x 578

390 x 244 x 600

390 x 299 x 600

390 x 299 x 780

2 x 3.0

515 x 284 x 840

39

40

Zip Econoboil

®


3 & 5 litre

Heating element

Embedded rod type.

Boiling chamber

Twin chamber in copper.

Steam-Heat-Boost technology.

Insulation

Aluminium backed Tontine.

Thermostat

Capillary type.

Case

Corrosion resistant white enamelled steel.

Tap

Two way, chrome-plated classic, catering style.

Approvals

WRAS, CE endorsed.

Warranty

One-year on site parts and labour. For full details of the Zip Warranty visit: www.zipheaters.co.uk/warranty

Installation

Install over a draining board, or work top fitted with a drip tray. Tap spout should be no higher than is necessary to fill large pots. Minimum tap height above draining board for on-wall maintenance is 200mm.

Plumbing

Designed for connection to a potable cold water supply with a minimum pressure of 0.7 bar. If pressure exceeds 7 bar a pressure limiting valve must be fitted. An isolating valve should be installed between the mains supply and the system.

Concealed plumbing

Connect inlet and vent pipes from the rear via 15mm capillary elbows.



Venting

The vent must discharge to a safe and visible position using a tundish.

Electrical

To be wired to a double pole fused spur, minimum break capacity of 13 amps.


Caution


Inline filter.

Zip Econoboil the low cost boiling water solution for locations where economy is of the essence

Product

Code


Capacity litres



Rating kW

@230V

Dimensions

W x D x H

(mm)

HS503

HS505

3.0

5.0

18

30

100

140

1.5

2.4

289 x 180 x 431

318 x 198 x 465

*


41

42

Zip Duo

®

Boiling and chilled filtered water

On-wall fixing or counter-mounted on stand provided

Delivery rate

Up to 100 cups of boiling and 35 glasses of chilled water at a time.

Recovery rate

Up to 217 boiling cups/hour. 90 chilled glasses/hour.

Case

Stainless steel or corrosion-resistant, white enamelled steel.

Taps

Two way, classic style catering taps.

Filtration

Integral 0.2 micron filtration.

Control panel

For programming sleep mode, timer and water temperature.

Refrigerant

R134A.

Approvals

CE endorsed.

Warranty

One-year on site parts and labour. For full details of the Zip Warranty Scheme visit: www.zipheaters.co.uk/warranty

Temperature Settings

On installation, to suit user needs, the boiling water temperature can be adjusted from 100˚ to 68˚C.

Location

The unit should be positioned either on a suitable load bearing wall capable of supporting 42kg - 5 litre, 64kg - 15 litre or on the counter mounting stand supplied.

The unit must have a minimum 150mm clearance on the left, 50mm on the right and 150mm on top.

Minimum tap height, if wall mounted should be 200mm above work surface. The vent must discharge to a safe and visible place.

Plumbing

The water supply must be potable

(drinkable).

If static pressure exceeds 7 bar, a pressure reducing valve must be fitted. An isolating valve should be installed between the water supply and the unit.

Electrical

To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps (3.5kW 15 amp). Installation must comply with current IEE regulations.

HD215 & HD315 should be provided with their own dedicated supply.

Caution

In some hard water areas where scale is an issue we recommend the fitting of the

Zip Professional Range of High Performance

Scale Filters (see page 33).

Energy Conservation

A choice of two programmable energy saving modes –

• Integral 24 hour 7 day timer to enable the boiling and chilled

units to switch automatically off during known periods of inactivity

e.g. overnight or weekends but return to full functionality ahead of

the next expected demand.

• Inactivity sleep mode enables the boiling water unit to power

down automatically following a period of 2 hours non-use. This

allows the water temperature to gradually reduce to 65˚C, at

which it is maintained. Upon further draw off boiling resumes.

Zip Duo

HD005

HD105

HD015

HD115

HD215

HD315

Product

Code

Case finish

Delivery any one time cups* glass

Recovery per hour cups* glass

White 30

S/Steel 30

35 120 90

35 120 90

White 100 35 140 90

S/Steel 100 35 140 90

White 100 35 217 90

S/Steel 100 35 217 90

Weight kg

(full)

Rating kW

@230V

42

42

64

64

64

64

2.0

2.0

2.3

2.3

3.5

3.5

Dimensions

W x D x H

(mm)

650 x 280 x 430

700 x 350 x 580

700 x 350 x 580

700 x 350 x 580

700 x 350 x 580

700 x 350 x 580

*


43

44

Zip Accessories

Boiling water

Hydroboil Extra Tap Kits

(tap extension pipework)

ZC100 For 10, 15 and 25 litre heaters, up to 2 taps (excludes taps).

SP90502 Tap for above.

Inline Filters

FL064 6” filter for taste and odour removal with scale reduction.

For use with Hydroboil up to 7.5 litre.

FL104 10” filter for taste and odour removal

with scale reduction. For use with

Hydroboil 10 litre and above.

Mug Racks

ZE010 Stainless steel

(for Classic Tap models only).

Zip Accessories

Boiling water

Cup Dispensers

ZE001 Stainless steel.

ZE002 White plastic.

Counter Stands

ZE004 - HS001.

ZE006 - HS003.

ZE007

ZE008

- HS005, HS105, HP005, HP105

- HS007, HS107, HP007, HP107

Tundish

ZD100

ZD101

Wall mounted chromed tundish.

Sink mounted chromed tundish.

ZE011 Stainless steel

(for Hydroboil Plus models only).

Drip Trays

ZD200 Stainless steel (with drain adaptor).

Drip Tray dimensions

W: 340mm x D: 190mm x H: 20mm with a 19.5mm drainage access

Universal Mounting Bracket

When a Zip Hydroboil replaces a Heatrae Sadia, Calomax or Instanta product this bracket may be used to secure the Hydroboil using existing fixings.

ZP001 3 and 5 litre.

ZP002 7.5 litre.

Zip Water Block

Recommended to be fitted in the water supply line to all

Zip products (except HydroTap) to minimise the potential damage in the event of leakage.

HE45004

45

46

Overview

Chilled, filtered water

Zip HydroTap

Zip FilterTap

Zip ChillTap

Zip Chillmaster

Zip Chill Fountain

Zip Wall Fountain

Zip’s mains fed chillers are designed for the workplace environment, to provide healthy, fresh filtered drinking water.


• Provides drinking water at a fraction of the cost of bottled water.

• No more bottled water to buy.

• No more bottled water to store.

• No more bottled water to handle.

• No more environmental issues associated with bottled water.

• No more running out of drinking water during periods of high demand such as hot weather.

• Now feature the most technically advanced 0.2 micron filtration system for healthier, better tasting drinking water.

Good hydration at work

Water is a vital nutrient for life. Everybody wants to be healthy at work and a healthier workforce leads to improved efficiency.

Even mild levels of dehydration adversely affect both physical and mental performance.

There is currently no agreement on how much water we should drink each day but estimates range from 1.2 to 3 litres per day.

The need for consumption at the top of these estimates would apply to those working in hot or dusty environments or where there is a need to wear protective clothing.

Access to drinking water

The law requires that employers provide an adequate supply of wholesome drinking water for all persons in the workplace. This must be readily available at suitable places.

Drinking water should not be sited where contamination is likely such as toilet or washroom facilities.

More information is available from the

Health and Safety Executive by visiting: www.hse.gov.uk

(Source: www.water.org.uk)

47

Zip HydroTap

®

Filtered chilled water system


• Provides chilled filtered water, instantly.

• Eliminates the need for expensive and environmentally damaging bottled water.

• Eliminates the need to store or handle bottled water.

• Eliminates the fear of running out of drinking water in extreme weather conditions or other periods of high demand.

• Can be sited a a sink, or away from it on the optional font and drain.

• Free-Flow™ facility, ensuring cold filtered water continues to be available even when the ‘chilled glasses per hour’ capacity is exceeded.

Choice options

C125G4

C175G4

Location

Fan-cooled condensor type

Refrigerant

R134A

Temperature settings

The chilled water temperature is factory set to deliver water at between 5 °C to 14°C.

N.B.

For general installation and specification details of the HydroTap range see page 10.

G4

TEC

HNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

G4

TECHNOLOGY

TEC

G4

HNOLOG

Y

48

Energy Conservation

Programmable operation

• Integral 24 hour 7 day timer enables the chilled water unit to switch-off automatically during known periods of inactivity e.g. overnight or weekends, but return to full functionality ahead of the next expected demand.




C125G4

C175G4

125

175

0.2

0.25

Dimensions

W x D x H

(mm)

336 x 476 x 335

336 x 476 x 335

49

50

Zip ChillTap

®

& ChillTap

®

Extra

Commercial


• Stylish tap.

• Fingertip control for filling glasses.

• Hands-free filling for large jugs and bottles.

• Superior 0.2 micron filtration.

• Filter change every 12 months.

• 140 glasses per hour.

Zip ChillTap

CT1/140

Chilled filtered water instantly.

Zip ChillTap Extra

CT2/140

Chilled filtered water instantly and cold

(ambient) filtered water.

Shown on optional font—ZT008.

Zip ChillTap Sparkling

CS125+

Chilled or sparkling filtered water instantly.

Shown on optional font—ZT008.



CT1/140

CT2/140

CTS125+

140

140

125

0.45

0.45

0.2

Dimensions

W x D x H

(mm)

353 x 291 x 385

353 x 291 x 385

353 x 248 x 369

51

52

Zip Chilltap

®

Under-sink chiller

Filtered drinking water


• Great tasting freshly filtered cool drinking water for fitting on a sink.

• Filters out dirt, rust and other particles contaminating drinking water.

• Reduces chlorine and other offensive water treatment chemicals.

• Delivers up to 140 glasses per hour.

• 0.2 micron filtration.

Storage capacity

Nominal 8 glasses.

Output capacity

Up to 140 glasses per hour at <10˚C.

Rating

0.3 kW @ 230V AC.

Chiller type

Fan cooled condenser with a compressor rated at up to 0.25 hp.

Refrigerant type

Non-toxic R134A.

Under-sink case


Sink mounted tap

Chrome plated brass with lever action tap and swivel head.

Filtration

0.2 micron fully encapsulated externally mounted double action carbon filter.

Approvals

WRAS, CE endorsed.

Warranty


Installation

The tap should be:

Positioned to the rear of a sink.

Mounted on a flat surface.

Mounted at 45 degrees to the edge of the sink so it drains into the sink when running.

The under-sink chiller must be:

Located as closely as possible to, and directly beneath the tap.

Installed with clearances of 50mm left, right and above, with 65mm to rear.

Filter should be:

Mounted where readily accessible on the chiller or on the adjacent cupboard wall.

Plumbing

Water connections 15mm push-fit.

If the water pressure is above 7 bar a pressure reducing valve (AQ3) should be fitted

Electrical

To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps. Installation must comply with current IEE regulations.



Zip Chilltap undersink, sink mounted tap

CH103 140 0.45

Dimensions

W x D x H

(mm)

355 x 290 x 385

53

54

Zip Chillmaster

®

Floor standing and wall mounted chiller



• Great tasting freshly filtered cool drinking water for high usage and public access areas.

• Heavy duty, easy-to-clean stainless steel bowl and stainless steel case.

• Filter change reminder light signals when filter cartridge replacement is due.

• Filter cartridges are quick and simple to change.

• Submicron filtration.


Nominal 8 glasses.

Output capacity

140 glasses per hour at <10ºC.

Rating

0.3 kW @ 230V.

Chiller type

Fan cooled condenser with a compressor rated at 0.25 hp.

Carafe filler

Chrome plated brass lever action tap with swivel head.

Optional Taps

R134A.

access panel.

Filtration

0.2 micron filtration.

Bubbler or Push Button (see page 64).

Refrigerant type

Case

Brushed finish stainless steel with front

Drain connection 38mm or 43mm diameter.

Approvals

WRAS, CE endorsed.

BREEAM compliance

The Zip Chillmaster is fully BREEAM compliant when fitted with ZG500 fitting kit

(see page 65).

Warranty


Installation

Water, drainage and power should all be available nearby.

The chiller should be mounted on a level surface (levelling feet are provided).

The chiller must be installed with clearances of 50 mm left, right and 65mm at rear

(except on wall mounted).

The optional kit ZG500, gives BREEAM compliance by ensuring services are protected from vandalism and the chiller securely fixed to the wall and floor.

Wall mounted Chillmaster supplied with 1⁄2 ” masonry anchors for use on solid walls only.

Plumbing


If water pressure is above 7 bar, a pressure reducing valve (AQ3) should be used (see page 84).

Electrical




Zip Chillmaster, floor standing

CH101 140

Zip Chillmaster, wall mounted

CH102 140

0.45

0.45

Dimensions

W x D x H

(mm)

350 x 350 x 915

353 x 248 x 369

55

56

Zip Wall Fountain

®

Recessed chiller



• Recessed chiller ideal for providing chilled filtered water where space is at a premium.

• Perfect for installing in busy corridors.



Nominal 8 glasses.

Output capacity

Rated at 140 glasses per hour at <10ºC.

Rating

0.3 kW @ 230V.

Chiller type

Fan cooled condensor with a compressor rated at 0.25 hp.


R134A.

Configuration

Equipped with carafe filler and bubbler.

Case

Brushed finish stainless steel with lockable front access panel.

Filtration

Complete with 0.2 micron fully encapsulated double action carbon filter.

Approvals

WRAS, CE endorsed.

BREEAM compliance

The Zip Wall Fountain is fully BREEAM compliant when installed as per fitting instructions.

Warranty


Installation

The chiller should be recessed into a wall where it is easy for users to access.


Integral, removable drip tray can be plumbed into waste if required.

Plumbing


If water pressure is above 7 bar a pressure reducing valve (AQ3) should be used (see

page 84).

Electrical

To be wired to a double fused switched spur, with a minimum breal capacity of 13 amps. Installation must comply with current

IEE regulations.

Availability

Allow 12 week lead time.



Zip Wall Fountain

CH104 140 0.45

Dimensions

W x D x H

(mm)

635 x 303 x 1670

57

58

Zip Chill Fountain

®

Wall mounted chiller

Filtered drinking water

Features and benefits

• The perfect heavy duty solution for public areas where configurations for adults, children or wheelchair access may be necessary.

• Bump action electronic controls for wheelchair usage and lockable front panels.

• Heavy duty, easy-to-clean stainless steel bowls and stainless steel case.

• Can be configured for adult, child or wheelchair usage.



Nominal 8 glasses.

Output capacity

Rated at 140 glasses per hour at <10ºC.

Rating

0.3 kW @ 230V.


R134A.

Chiller type

Fan cooled condensor with a compressor rated at 0.25 hp.

Configuration

Can be configured for adult, child or wheelchair use or any combination of these.

Case

Brushed finish stainless steel case with lockable front access panel.

Filtration

Complete with submicron fully encapsulated double action carbon filter.

Approvals

WRAS, CE endorsed.

BREEAM compliance

The Zip Chill Fountain is fully BREEAM compliant when installed as per fitting instructions.

Warranty


Installation

The chiller should be wall mounted where it is easy for users to access.


Integral, removable drip tray can be plumbed into waste if required.

Plumbing


If water pressure is above 7 bar ressure ducing valve (AQ3) should be used (see page 84).

Electrical


Availability

Allow a 12 week lead time.

Product Code

Zip Chill Fountain - Adult

CH105 140

Zip Chill Fountain - Child

CH145 140

Zip Chill Fountain - Wheelchair

Product type

Single bowl

0.45

0.45

CH115 140

Product Code

Zip Chill Fountain - Adult / Adult

Product type

Double bowl

0.45

0.45

CH155 140

Zip Chill Fountain - Child / Child

CH165 140

Zip Chill Fountain - Wheelchair / Wheelchair

0.45

CH135 140

Zip Chill Fountain - Adult / Child

CH125 140

Zip Chill Fountain - Adult / Wheelchair

CH175 140

Zip Chill Fountain - Child / Wheelchair

CH185 140

0.45

0.45

0.45

0.45

Dimensions (mm)

W x D x H

500 x 410 x 1140

500 x 410 x 1140

500 x 410 x 1140

Dimensions (mm)

W x D x H

500 x 410 x 1140

500 x 410 x 1140

500 x 410 x 1140

500 x 410 x 1140

500 x 410 x 1140

500 x 410 x 1140

59

60

Zip HydroTap

Chilled and chilled sparkling water for the Home

Delivery rate

Up to 18 glasses of chilled water at a time.

Rating

0.3 kW @ 230V AC.

Chilling system

Fan-cooled condenser type.

Refrigerant

R134A.

Tap head

Chrome plated, die cast tap body with push and pull levers for electronically controlled water delivery, integral LED indicators.

Disabled 0ption

Oversize lever taps.

Under counter unit

Houses chilled and filtration systems.

Corrosion resistant white enamelled steel case, with front access door.

Control panel

Located on under counter unit to control timer and water delivery.

Filtration system

Integral triple-action, 0.2 micron, encapsulated cartridge.

Safety features

Undercounter safe tray with leak detector.

Approvals

CE endorsed.

Warranty


Installation

The tap should be positioned either on a suitable sink or on a Zip Tap Font. If installing on a sink, the tap should be mounted so that it will dispense into the sink.

The undersink unit should be located if possible directly beneath the tap and not more than 1 metre away. It must be installed with clearances of 50mm left and right and 65mm at rear.

Plumbing

The water supply must be potable

(drinkable).

If static pressure exceeds 7 bar, a pressure reducing valve must be fitted. An isolating valve should be installed between the water supply and the under-bench unit.

If water pressure is above 7 bar a pressure reducing valve (AQ3) should be used (see page 84).

Venting

The cupboard containing the chilling unit must be amply ventilated: cupboard doors must be offset all round for ventilation, using buffers provided and the vent fitted

(supplied).

Electrical


Energy Conservation

Programmable operation

• Integral 24 hour 7 day timer enables the chilled water unit to switch off automatically during known periods of inactivity e.g. overnight or weekends but return to full functionality ahead of the next expected demand.

Tap mounted on sink Tap mounted on optional font and drain ZT008

Undercounter command centre

Product

Code

Chilled sparkling water

HydroTap chilled

Chilled still water

DOMC4 NO

HydroTap chilled and sparkling

YES

DOMCS4 YES YES


Dimensions

W x D x H

(mm)

0.13

0.30

280 x 389 x 335

280 x 389 x 335

61

Chilled Water

For the Home


• Fingertip control for filling glasses.

• Hands-free filling for large jugs and bottles.

• Superior 0.2 micron water filter.

• Filter change every 12 months.

62

Zip ChillTap Sparkling

• Chilled filtered water, instantly.

• Plus chilled filtered sparkling water, instantly.

Zip Filter Tap

• Filtered cold (ambient) water

Zip ChillTap Extra

• Chilled filtered water, instantly.

• Plus filtered cold (ambient) water.

Zip Font and Drain

• Allows siting away from the sink

• Connects to waste

Product

Code

Sparkling water

Chilled still water

Ambient water


Dimensions

W x D x H

(mm)

ChillTap Sparkling

DOMCTS YES

ChillTap Extra

DOMCT1 NO

ChillTap

DOMCT2

Filter Tap

DOMFT1

NO

NO

YES

YES

YES

NO

NO

YES

NO

YES

0.245

0.245

0.245

-

354 x 248 x 369

353 x 253 x 377

353 x 253 x 377

-

63

64

Chilled water

Accessories

ZE001

Stainless steel dispenser for disposable cups.

ZI001

Optional drinking bubbler.

Chilled water

Accessories

BREEAM

(BRE Environmental Assessment

Method) sets the standard for best practice in sustainable design and has become the de facto measure used to describe a building’s environmental performance.

The BREEAM Health and Well

Being credit HEA16 (drinking water) requires chillers to be installed in compliance with industry standard.

ZG500 (right) enables the Zip

Chillmaster to fully comply with these requirements.

ZI002

Optional Tap for Chillmaster with push button dispense.

ZD003

Waste water dish for installation where drainage is not available.

Zip Water Block

HE45004

Recommended to be fitted in the water supply line to all Zip chilled products (except HydroTap) to minimise the potential damage in the event of leakage.

65

Overview

Energy-efficient water heaters

66

Zip offers one of the widest and most sophisticated ranges available in the UK

Instantaneous

• No standing heat loss, only heats water as required.

• Unlimited supply of hot water - subject to conditions and demand.

• Electronic temperature control automatically compensates for fluctuations in incoming water temperature and pressure.

Choose from:

ES; 2.8, 4.4 & 6.6kW (see pages 70-73).

CEX; 6.6 & 8.8kW (see pages 74-75).

DEX, DEX12 & DBX 18, 21, 24 & 27kW (see pages 76-77).

Unvented

• Fed directly from cold water mains.

• Quicker to install with no need for cold water storage cistern.

• Balanced hot and cold water supplies.

• High performance showering and faster filling baths.

• No special taps needed.

Choose from:

Aquapoint, 5 to 100 litres (see pages 80-81 & 86-87).

Varipoint, 10 to 100 litres (see pages 82-83 & 88-89).

AquaFlo, 90 to 300 litres (see pages 90-93).

Open Vented

• Easy to install.

• Single point of use.

• Overbasin and underbasin variants.

• Overbasin includes spout and valve.

• Underbasin requires vented taps.

Choose from:

Tudor, 5 & 10 litres (see pages 94-95).

Contract, 5 & 10 litres (see pages 96-97).

Cistern Fed Storage

• Can serve multiple outlets.

• Can be installed in ceiling voids.

• Reliable, ‘fit and forget’ solution.

Choose from:

RCH, 25 to 100 litres (see pages 98-99).

67

Zip InLine instantaneous water heating

The inside story

68

Why Zip InLine instantaneous

water heating?

Zip InLine instantaneous water heaters are the most energy efficient way of directly heating water electrically.

Using the very latest German technology,

Zip InLine offers a host of Specifier, Installer and End User benefits:

• Unrivalled energy efficiency

- no standing heat loss.

Energy efficiency

•

Zip InLine saves energy by:

• Heating only the water drawn off.

Avoiding stored water heat losses.

When comparing the energy used over 24 hrs to deliver 75 litres of water at 38°C

(assuming 12°C supply) typical savings of

23% can be achieved.

Product Energy Usage

• Sophisticated electronic control.

• Unlimited hot water supply.

•

• Compatible with standard tapware.

•

Easy to install.

Neat compact design.

• Tangible water savings.

15 litre storage water heater 3.0kWh

Zip InLine 2.3kWh

N.B. Percentage savings may be less with increased demand but more during periods without draw off.

Bare wire technology

The Zip ES, CEX, DEX and DBX models feature bare wire heating technology using stainless steel elements directly immersed in the water flow path.This system achieves maximum efficiency by means of direct contact with the water flow plus the fastest possible heat up times.

Unlimited supply of hot water *

Zip InLine will deliver a continuous supply at the selected temperature.

Easy installation

Zip InLine products simply connect to standard closed outlet taps without the need for unvented water controls.

Smart design

The unit’s compact size enables it to fit neatly and unobtrusively in any location.

Water conservation

Zip InLine is designed for installation close to the point of use, avoiding the need for water to be run off before achieving temperature.

Savings per draw off compared to centralised systems with long pipe runs are as follows:

Traditional system Litres saved

pipe run 15mm per draw off

10 metres 3.2

* Subject to sufficient power being available to achieve the required

temperature and outlet flow under local conditions.

69

70

Zip InLine ES

®

NEW model

Electronic instantaneous water heater

Single outlet for hand washing


• Compact electronically controlled instantaneous water heater for hand washing.

• Bare-wire for fast heat up.

• Innovatively designed appliance that heats the water automatically as it flows through.

• No standing heat losses.

• Heating power automatically adjusted to compensate for variable inlet pressure and temperature.

• Supplied with 700mm of pre-wired cable.

• Outlet temperature factory set to

38°C, but can be installer adjusted between 30°C to 45°C.

• Intended for use with taps having removable M22/M24 nozzles.

• External flow regulation.

• Easier servicing.

• Easy to install with re-designed, improved wall bracket.

Operation

Heating power is switched on automatically once the minimum flow rate is exceeded.

Rating

ES3 2.8kW @230V

ES4 4.4kW @230V

ES6 5.5kW @230V

Heating system

Bare-wire heating system for fast response.

Safety feature

Water temperature electronically controlled to maintain factory setting of 38°C.

Temperature setting

Temperature and flow adjustable at time of installation.

IP rating

IP 25.

Product Selection

Instantaneous water heating is the most efficient available, however, delivered water temperature is dependent on local incoming water temperature and supply voltage. Quoted performance assumes

12 ° C incoming water temperature and

230V supply.

Case

Impact resistant plastic.

Approvals

WRAS, VDE, CE endorsed.

Taps - Important.

For correct operation it is essential that the special tap nozzle supplied is fitted to the tap spout.

Nozzles supplied to suit

M22/24 taps should be used.

Warranty


Location

The appliance must be installed in a frost free environment.

Plumbing

The appliance is intended for connection to the mains water supply. It should be installed by a suitably qualified person. The appliance may be used as an unvented or vented installation. N.B. Not recommended for use with thermostatic mixing valves or taps.

Electrical

The appliance must be earthed and connected to the supply by means of permanent wiring through suitable isolation having a contact separation of at least 3mm in all poles. Installation must comply with current IEE regulations.

T Technical Data echnical Data

Maximum temperature increase @230V and a flow rate of:

2.0 litres/min

2.5 litres/min

3.0 litres/min

3.5 litres/min

4.0 litres/min

Switch on flow rate (l/min)

Switch off flow rate (l/min)

ES3

20 ºC

16 ºC

13 ºC

11 ºC

10 ºC

1.2

1.0

ES4

31 ºC

25 ºC

21 ºC

18 ºC

1.5

16 ºC

1.3

ES6

39 ºC

31 ºC

26 ºC

22 ºC

20 ºC

1.5

1.3

ES3

ES4

ES5

Product

Code

Product

Zip InLine instantaneous




2.8

4.4

5.5

*38 O C Max

Flow rate ltrs/min

1.5

2.4

3.0

Dimensions

W x D x H

(mm)

187 x 80 x 132

187 x 80 x 132

187 x 80 x 132

71

Zip InLine ES

®

Instantaneous hand wash packs – complete with heater, tap & fittings

These new packs provide the installer with the

ES heater, compatible tap and a comprehensive plumbing kit including flexible hoses and fittings to ensure quick and easy system installation.

The packs are offered in a choice of 3 power ratings with non-concussive or mixer tap.

Non-concussive (NC) pack:

• ES instantaneous water heater.

• Non-concussive single outlet tap.

• 50cm flexible hose for connection to heater.

• 50cm flexible hose for connection to tap.

(Isolating valve NOT supplied).

Mixer Tap (MT) pack:

• ES instantaneous water heater.

Optional matching cold taps available

• Single lever mixer tap complete with braided hoses.

• 50cm braided hose for connection to heater.

• Flow rate adjuster for cold supply to tap.

• Non-return valve for hot supply to tap.

• Tee piece connector.

(Isolating valve NOT supplied).

Approvals

WRAS, VDE, CE endorsed.

NC Pack (non-concussive tap)

Isolating valve

MT Pack (mixer tap)

72

Product

Code

Tap Type Rating 38˚C Max Flow Rate kW @ 230V ltrs/min

ES3/NC Non-concussive 2.8 1.5



ES3/MT Single lever mixer 2.8 1.5



ZL018 Matching non-concussive cold tap

Isolating valve

Flow rate adjuster

Non return valve

73

Zip InLine

®

CEX

Over and Undersink Electronic

Instantaneous Water Heaters for

Single or Multiple Outlets

74


• The most energy efficient way of heating water electrically.

• Highly efficient bare wire heating system.

• Zero standing heat loss as no stored water.

• Instant hot water.

• Provides a constant* supply of hot water at exactly the temperature selected.

• Heating power adjusted electronically to compensates for variable inlet pressures and temperatures.

• Required temperature can be set using two touch sensitive keys within the range 30°C to 55°C with digital display.

• Maintains precise temperature control despite fluctuations in voltage and water pressure.

• Suitable for use with preheated water from solar systems.

• Power rating can be selected at time of installation.

• Optional wireless control (ZL016).

• CEX-O for oversink CEX-U for undersink installation.

Ratings

6.6kW/8.8kW. Selected at installation.

Heating System

Bare-wire system.

Approvals

WRAS, VDE & CE endorsed.

Warranty

1 year on site parts and labour. For full details visit: www.zipheaters.co.uk/warranty

Location


In order to minimise thermal losses the distance between the appliance and the outlet fitting should be as short as possible.

Plumbing

The appliance is intended for connection to a mains potable water supply. The specific water resistance of the supply must not fall below the minimum specified on the rating plate.

Minimum flow rate 2 litres/min.

Should be installed by a suitable qualified installer of electric instantaneous water heaters.

Electrical

The appliance must be earthed and connected to the supply by means of permanent wiring through an isolation switch having a contact separation of at least 3mm on all poles and protected by a suitably rated circuit breaker.

The cross sectional area of the connection cable must be in accordance with the power rating of the appliance.

The installation must be in accordance with current IEE regulations.

IP Rating

Oversink IP25 Undersink IP24

Suitable for Zone 1.

* Subject to a minimum water pressure of 2 bar and maximum of 10 bar

CEX-O

CEX-U

Technical Data

Maximum temperature increase @230V and a flow rate of:

3.0 litres/min

3.0 litres/min

3.0 litres/min

3.0 litres/min

Switch on flow rate (l/min)

31 ºC - 42 ºC

24 ºC - 31 ºC

19 ºC - 25 ºC

16 ºC - 21 ºC

2.0

Product

Code


CEX-O

CEX-U

6.6 - 8.8

6.6 - 8.8

50 O C Max


2.5 - 3.3

2.5 - 3.3

38 O C Max


1.5

2.4

Temperature setting range

(oC)

30 - 55

30 - 55

Dimensions

W x D x H

(mm)

177 x 108 x 294

177 x 108 x 294

75

Zip InLine

®

DEX, DEX12 & DBX

Electronic Instantaneous Water

Heaters for Single or Multiple Outlets


All models

• The most energy efficient way of directly heating water electrically.

• Highly efficient bare wire heating system.

• Zero standing heat loss as no stored water.

• Instant hot water.

• Provides a constant* supply of hot water at exactly the temperature selected.

• Heating power adjusted electronically to compensate for variable inlet pressures and temperatures.

• Maintains precise temperature control despite fluctuations in voltage and water pressure.

• Optional remote control temperature selection (using ZL017)

DBX:

Outlet temperature set to 50°C adjustable inside the appliance from 30°C to 60°C.

DEX:

If required, two temperature settings can be set using the touch sensitive keys within the range 20°C to 60°C. (20°C to

55°C for DEX12) with digital display of the selected temperature.

Suitable for use with preheated water from solar systems (not DEX12).

Power rating can be selected at time of installation.

Ratings

DEX12 8.8-11kW (adjustable)

DEX 18-27kW (adjustable)

DBX 18kW, 21kW, 24kW & 27kW.

Heating System

Bare-wire system.

IP Rating

IP 25 – Suitable for Zone 1.

Approvals

WRAS, VDE & CE endorsed.

Warranty

1 year on site parts and labour. For full details visit: www.zipheaters.co.uk/warranty

Location


In order to minimise distribution losses the distance between the appliance and the outlet fitting should be as short as possible

(less than 2m).

Plumbing

The appliance is intended for connection to a mains potable water supply. The specific water resistance of the supply must not fall below the minimum specified on the rating plate.

Minimum flow requirements:

2 litres/min.

Should be installed by a suitably qualified person.

N.B.

Not recommended for use with thermostatic mixing valves or taps.

Electrical

The appliance must be earthed and connected to the supply by means of permanent wiring through an isolation switch having a contact separation of at least 3mm on all poles and protected by a suitably rated circuit breaker.


The installation must be in accordance with current IEE regulations.

76

* Subject to a minimum water pressure of 2 bar and maximum of 10 bar

DBX DEX

DEX12 DEX

Temperature adjustment range

7.5ºC- 55ºC 20ºC- 60ºC

DBX18

Maximum inlet temperature

25ºC 70ºC

Maximum flow rate (litres/min)

5.0

8.0

Pressure loss @ 2.5 l/min

7.0

DBX21

0.2 bar

8.0

DBX24

30ºC- 60ºC

30ºC

8.0

Pressure loss @ 9.0 l/min

1.3 bar

DBX27

9.0

Product

Code


8.8 - 11.0*

18.0** - 27.0***

18.0**

50 0 C Max


3.3 - 4.1

6.8

6.8

38 O C Max


4.8 - 6.1

DEX12

DEX

DBX

DBX21

DBX24

DBX27

21.0**

24.0**

27.0***

7.9

9.0 

9.8 

9.8 

11.4 

13.0 

10.2 

* 1/N/PE 230V ** 3/PE 280-4150V *** 3/PE 400V

 mixed with cold water at the tap

14.8 

Dimensions

W x D x H

(mm)

231 x 97 x 466

231 x 97 x 466

231 x 97 x 466

231 x 97 x 466

231 x 97 x 466

231 x 97 x 466

77

78

Zip InLine

Instantaneous water heating

Instantaneous flow and temperature rise chart

Single Phase

60

55

50

35

30

45

40

25

0.0 1.0

ES3

ES4

ES6

CEX (6.6kW)

CEX (8.8kW)

DEX12

2.0 3.0 4.0

Flow Rate (l/min)

5.0 6.0 7.0

Three Phase

55

50

65

60

DEX/DBX (18kW)

DEX/DBX (21kW)

DEX/DBX (24kW)

DEX/DBX (27kW)

45

40

35

30

5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0

Flow Rate (l/min) mixed with cold water at the outlet

Zip InLine

Accessories

Optimum performance

For the best results from the Zip InLine products the following tap spray nozzles, handsets and remote control should be used.

Tap spray nozzle

Code

ZL002

Type

22mm female thread

ZL003 24mm male thread

Tap aerator nozzle

ZL008 15mm insert

ZL004

ZL005

22mm female thread

24mm male thread

Shower hand set

ZL006 Fixed pattern

Shower hand set

ZL007 4 mode adjustable

Flow rates from

2.0 litres/min

2.0 litres/min

3.5 litres/min

3.5 litres/min

3.5 litres/min

4.0 litres/min

4.0 litres/min

Touch-free taps for use with Zip InLine

1 2

1 Long reach basin/sink tap

TF001 —Mains powered

TF002 —Battery powered

2 Standard reach basin/sink tap



5

3

8

4

6

7

3 Tubular wall mounted tap



4 Tubular deck mounted tap



5 Pillar tap

TF009 —Dual powered

6 Remote control

TF100 for 3, 4 & 5

7 Remote control

ZL016 for CEX

ZL017 for DEX

8 Installation Frame

ZL020 for DEX & DBX

79

80

Zip Aquapoint III

®

Unvented water heater

Single or multiple outlets

5, 10, 15 litre

Undersink and Oversink


Glass lined steel inner container tested to

12 bar.

Sacrificial anode for protection against corrosion.

Element ‘ON’ neon indicator.

External temperature control with frost protection.

Oversink and Undersink versions available.

5, 10 & 15 litre.

Capacities

5 litre, 10 litre, 15 litre.

Rating

2.0 kW @ 230V.

Heating element

Embedded rod type.

Thermostat

Capillary type adjustable from 7ºC to 75ºC.

Water tank

1.8 mm glass enamelled steel tested to

12 bar.

Case

High impact resistant white plastic.

Insulation

High density, CFC-free polyurethane foam.

IP rating

24.

Approvals

WRAS, CE endorsed.

Warranty


Safety features

Manually resettable over temperature safety cutout.

Expansion relief valve (supplied) set at 6 bar.

Sacrificial anode for added protection for element and tank in aggressive water conditions, requiring regular inspection and replacement when necessary.

Installation

Separate models available for oversink and undersink installation.

All models can be wall mounted.

Undersink units can be installed unsupported on the floor if required.

All models can supply one outlet or multiple outlets, subject to capacity, without the need for special taps.

Plumbing

Water connections 1⁄2 ” BSP

Expansion relief valve (supplied) set at

6 bar. Should be installed only by a suitably experienced installer of unvented electric storage water heaters.

Oversink and undersink models not interchangeable.

Electrical


Supplied with 1 metre of pre-wired cable.

Oversink Undersink

Product

Code


Zip Aquapoint II Oversink

AP3/05/OB 2.0

AP3/10/OB 2.0

AP3/15/OB 2.0

Zip Aquapoint II Undersink

AP3/05

AP3/10

AP3/15

2.0

2.0

2.0

Capacity

Litres

5.0

10.0

15.0

5.0

10.0

15.0

Thermal

Loss kWh/day

Dimensions

W x D x H

(mm)

0.35

0.48

0.62

0.35

0.48

0.62

256 x 260 x 376

350 x 265 x 480

350 x 310 x 480

256 x 260 x 376

350 x 265 x 480

350 x 310 x 480

81

82

Zip Varipoint II

®


Single or multiple outlets

10, 15 litre

Undersink & oversink


Heavy gauge copper inner container tested to 16 bar.

Five year warranty on inner container, two years on controls.

Does not require an anode or regular inspection.Supplied with temperature and pressure relief valve.

Oversink and undersink versions available

10 litre or 15 litre.

External temperature control with frost protection setting.


Supplied complete with wall mounting bracket.

Capacities

10 litre, 15 litre.

Rating

2.2 kW @ 230V.

Heating element

Embedded rod type.

Thermostat

Capillary type adjustable up to 75ºC.

Water tank

Heavy gauge copper, pressure tested to

16 bar.

Case

High impact resistant white plastic.

Insulation


IP rating

24.

Approvals

WRAS, CE endorsed.

Warranty

Five year on site parts and labour warranty on inner container, two years on controls.

For full details of the Zip Warranty Scheme visit: www.zipheaters.co.uk/warranty

Safety features

Manually resettable over temperature safety cut-out.

Pressure and temperature relief valve supplied.

Expansion relief valve supplied, set at 6 bar.

Frost protection setting.

Installation

Separate models available for oversink and undersink installation.

All models can supply one or more outlets.

No special taps required.

Undersink is floor standing or wall hung on bracket (supplied).

Oversink is wall hung, on bracket (supplied).

Plumbing

Water connections 1⁄2 ” BSP.

Pressure and temperature relief valve

(supplied) should be fitted to heater.

Pressure relief valve (supplied) to be fitted in cold water supply.

Should be installed only by a suitably experienced installer of unvented electric storage water heaters.

Oversink and undersink models not interchangeable.

Electrical

To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps. Installation must comply with current

IEE regulations.


Underrsink Oversink

Product

Code


Zip Varipoint II Oversink

VP103

VP153

Zip Varipoint II Undersink

2.2

2.2

VP103UB

VP153UB

2.2

2.2

Capacity

Litres

10.0

15.0

10.0

15.0

Thermal

Loss kWh/day

Dimensions

W x D x H

(mm)

0.36

0.50

300 x 285 x 452

300 x 285 x 452

0.41

0.58

300 x 285 x 452

300 x 285 x 452

83

Zip Accessories

Unvented water heating

5, 10 & 15 litre capacity

AQ2

Expansion vessel and check valve

(3.5 bar)

AQ3

Combined ressure reducer (set at 3.5 bar) and line strainer

84

Varipoint & Aquapoint

Unvented Accessory Selection

Will the pipework accommodate expanded water without hot water entering any supply pipe connected to a cold water draw-off? (See diagram A opposite and note minimum pipe lengths). If expansion in the cold water main is restricted, e.g. by a valve or meter, an expansion vessel and other relevant accessories MUST be fitted.

NO

YES

YES

Is reverse flow prevented, e.g. by a valve or meter?

NO

Is the mains pressure 4.0 bar or less?

NO YES

Is the mains pressure 4.0 bar or less?

NO YES

Fit AQ2 + AQ3 Fit AQ2 Fit AQ2 + AQ3 NOT REQUIRED

Additional Accessories

AQ1

Pressure and temperature relief valve (7 bar/90ºC).

Provides additional levels of safety when fitted to water heater as shown in Diagram D.

Note: Varipoint supplied complete with AQ1.

Order AQ1 separately for use with Aquapoint.

AQ1

AQ4

AQ4 TMV2

Thermostatic blending valve complete with 2 check valves. (Set temp range

30º to 65ºC).

AQ4S TMV3

NHS Approved Thermostatic Blending Valve complete with 2 check valves.

(Set temp range 30º to 50ºC).

These blending valves provide over temperature protection and are also ideal for extending system capacity.

Zip Accessories

Unvented water heating

5, 10 & 15 litre capacity

Diagram A

Inlet pressure less than 4 bar and expanded hot water can be accommodated in the pipe work.

Aquapoint or Varipoint

Minimum length of pipe – Length ‘A’

Capacity

5 litres

10 litres

15 litres

15mm pipe

1.37m

2.7m

4.2m

22mm pipe

0.6m

1.2m

1.8m

Diagram B

Inlet pressure less than 4 bar but expanded hot water cannot be accommodated in the pipe work. (Install AQ2 expansion vessel and check valve).


Diagram C

Inlet pressure greater than 4 bar. (Install AQ2 expansion vessel and check valve with AQ3 pressure reducer).


85

86

Zip Aquapoint III

®


Multiple outlet 30, 50, 80 & 100 litre


Glass lined steel inner container tested to

13 bar.

Sacrificial anode for protection against corrosion.



High performance foam insulation.

Factory fitted P&T valve.

Element replacement can be carried out without draining.

Accessories (supplied) Pressure reducing valve and line strainer set to 3.5 bar.

Expansion relief and single check valve set to 6 bar.

Pressure and temperature relief valve set to

7 bar and 90ºC.

External expansion vessel pre-charged to

3.5 bar.

Tundish and wall brackets.

Capacities

30 litre, 50 litre, 80 litre, 100 litre.

Rating

3.0 kW @ 230V.

Heating element

Dry pocketed tubular.

Thermostat

Capillary type adjustable

20ºC to 75ºC.

Inner container

1.8mm glass enamelled steel tested to

13 bar.

Case


Insulation


Warranty


Approvals

WRAS, CE endorsed.

Safety features

Manually resettable safety cutout.

Heater protected against freezing while power switched on.

Factory fitted pressure and temperature relief valve designed to operate at 7 bar and 90ºC.

Expansion relief valve set to operate at

6 bar.

Installation

For installation by a qualified installer in accordance with all national and local

Building Regulations.

Intended for wallmounting – please ensure that the wall and fixings are strong enough to take the weight of the water heater when full.

Plumbing


Minimum recommended water pressure

1 bar.

Unit supplied with full installation kit comprising: expansion vessel, pressure reducing valve, balanced take off, expansion relief valve (6 bar), line strainer, tundish and wall brackets.

P&T and expansion relief valves require plumbing to waste in accordance with water authority bylaws.

Sacrificial anode for added protection for element and inner container in aggressive water conditions – requires regular inspection and replacement when necessary.

Electrical


IEE regulations.

Element can be changed without draining down.

Product

Code

Zip Aquapoint II

AP3/30

AP3/50

AP3/80

AP3/100

Capacity

Litres

30.0

50.0

80.0

100.0

Weight

Full (kg)

49

74

108

131

Thermal

Loss kWh/day

Dimensions

W x D x H

(mm)

0.65

0.68

0.94

1.10

420 x 445 x 525

420 x 445 x 690

420 x 445 x 950

420 x 445 x 1125

87

88

Zip Varipoint III

®


Multiple outlets

30, 50, 80,100 litre


Heavy gauge copper inner container, tested to 12 bar.

Five year warranty on inner container, two years on controls.

Does not require an anode or regular inspection.

Supplied with factory fitted P&T valve and full installation fitting kit.

External temperature control.


High performance foam insulation.

Accessories (supplied)

Pressure reducing valve set to 3.5 bar and line strainer.

Pressure relief valve set to 6 bar and single check valve.

Pressure and temperature relief valve set to

7 bar and 90ºC.

External expansion vessel pre-charged to

3.5 bar.

Tundish and wall brackets.

Tee piece and drain valve.

Expansion vessel capacity

VP303/VP505 = 5 litre

VP803/VP953 = 8 litre

Capacities


Rating

2.7 kW @ 230V.

Heating element

Replaceable embedded rod type.

Thermostat


37ºC to 75ºC.

Inner container

Heavy gauge copper tested to 12 bar.

Case


Insulation


Approvals

WRAS, CE endorsed.

Warranty

Five-year on site parts and labour warranty on inner container, two years on controls.

For full details of the Zip Warranty Scheme visit: www.zipheaters.co.uk/warranty

Safety features

Manually resettable safety cutout.


Factory fitted pressure and temperature relief valve designed to operate at 7 bar and 90ºC.

Expansion relief valve set to operate at

6 bar.

Installation



Intended for wallmounting – please ensure that the wall and fixings are strong enough to take the weight of the water heater when full.

Plumbing


Minimum recommended water pressure

1 bar.

Unit supplied with full installation kit comprising: expansion vessel, pressure reducing valve, balanced take off, expansion relief valve (6 bar), line strainer, tundish and wall brackets.

P&T and expansion relief valves require plumbing to waste in accordance with water authority bylaws.

Electrical


IEE regulations.

Product

Code

Zip Varipoint III

VP303

VP503

VP803

VP953

Capacity

Litres

30.0

50.0

80.0

100.0

Weight

Full (kg)

50

70

107

133

Thermal

Loss kWh/day

Dimensions

H x Diameter

(mm)

0.732

0.912

1.032

1.207

620 x 430

808 x 430

946 x 485

1091 x 485

89

90

Zip AquaFlo II

®


Unvented stainless-steel cylinders

90 to 300 litre capacity


Wide range of capacities from 90 litres up to 300 litres.

High grade Duplex Stainless Steel Unvented

Cylinder for long life.

Incoloy immersion elements provide excellent corrosion resistance.

Titanium replacement elements available for high use applications.

Compact coil-in-coil heat exchangers provide fast heat up and recovery.

Multi-element options for faster heat up.

High performance insulation ensures minimum heat loss.

External expansion for optimum reliability, more usable space and ease of maintenance.

No sacrificial anode. Avoids the need for regular inspection.

22mm compression connections for ease of installation.

Cylinders tested to 15 bar.

25 year transferable cylinder warranty.

2 year warranty on all other components.

Fully approved to UK Water Regulations and

Buildings Regulations Part G3 and Part L.

Construction

• Direct, indirect and solar compatible unvented water heaters.

• Corrosion resistant Duplex Stainless Steel cylinder.

• High performance, low profile coil-in-coil heat exchanger.

• High performance CFC free injected polyurethane foam insulation.

• White plastic coated steel case resistant to scuffs and damage.

• External expansion for reliability and ease of maintenance.

• Cylinder pressure tested to 15 bar.

Installation



Intended for floor standing only – refer to

Technical Data for weight when full.

Nominal Capacity

Direct and Indirect units: 90, 120, 150,

180, 210, 250 and 300 litres.

Solar Twin Coil and Solar Direct units: 150,

180, 210, 250 and 300 litres.

Immersion Elements

Incoloy construction 1¾” thread. Length

14” Loading 3kW @ 240V.

Heat Exchanger

22mm low profile, high efficiency stainless steel coil-in-coil.

Controls

Thermostat – adjustable up to 65°C.

Over temperature safety cut-out –

Re-settable. Operates at 85°C.

Expansion relief valve – 6 bar.

Temperature and pressure relief valve –

90°C and 7 bar.

Tundish.

Two way valve with indirect models.

Pressure reducing valve – 3 bar.

Expansion vessel – Pre-charged to 3 bar.

Plumbing

For connection to 22mm mains potable water supply.

Minimum water supply 1.5 bar, 20 l/min.

Maximum water supply pressure 12 bar.

Electrical

To be wired to a suitably rated double pole fused spur.


Approvals

KIWA approved to UK Water Regulations.

KIWA approved to UK Building Regulations

Part G3 and Part L.

Immersion element/thermostat BEAB approved and CE endorsed.

Warranty

25 years on cylinder transferable

(conditions apply).

2 years on all other components.

91

92

Zip AquaFlo II

®


Unvented stainless-steel cylinders

90 to 300 litre capacity

AquaFlo Direct

Product

Code

AF3090

AF3120

AF3150

AF3180

AF3210

AF3250

AF3300

AF3150S*

AF3180S*

AF3210S*

AF3250S*

AF3300S*

Nominal

Capacity

(L)

90

120

150

180

210

250

300

150

180

210

250

300

Height

(mm) x

545 Dia

727

915

1102

1290

1478

1728

2041

1102

1290

1478

1728

2041

Weight

Empty

(kg)

21

26

33

38

41

46

55

33

38

41

46

55

Weight when Full

(kg)

111

146

183

218

251

296

355

183

218

251

296

355

Vol within

10ºC of set

temp (L)

73

102

133

163

194

236

288

133

163

194

236

288

Heat up

3kW

(mins)

76.0

103.0

134.0

164.0

203.0

248.0

323.0

134.0

164.0

203.0

248.0

323.0

Heat up

6kW

(mins)

-

-

-

-

-

-

-

73

88

108

130

168

Heat up

9kW

(mins)

-

-

-

-

-

-

-

57

67

80

95

120

Boost re-heat

(mins)

-

58.0

72.0

82.0

96.0

117.0

145.0

72.0#

82.0#

96.0#

117.0#

145.0#

Low level immersion

High level immersion

Standing

Loss elements elements (kWh/day)

1 0 1.07

1

1

1

1

1

1

3 or 2

3 or 2

3 or 2

3 or 2

3 or 2

1

1

1

1

1

1

0 or 1

0 or 1

0 or 1

0 or 1

0 or 1

1.23

1.41

1.53

1.80

2.15

2.28

1.41

1.53

1.80

2.15

2.28

* Supplied with 3 elements and 4 bosses - 3 at low level and 1 at high level. Additional elements are available for installation in the 4th boss. # If using high level element

AquaFlo Indirect

Product

Code

AF4090

AF4120

AF4150

AF4180

AF4210

AF4250

AF4300

Nominal

Capacity

(L)

90

120

150

180

210

250

300

Height

(mm) x

545 Dia

727

915

1102

1290

1478

1728

2041

Weight

Empty

(kg)

23

30

38

42

45

51

60

Weight when Full

(kg)

111

148

186

220

253

299

357

Vol within

10ºC of set

temp (L)

74

105

132

160

188

232

285

Indirect Heat

Exchanger

(kW)

16.46

16.46

18.55

18.55

18.55

22.00

22.00

Recovery

Indirect

(mins)

12.0

16.0

17.2

20.4

22.0

25.0

34.0

Boost re-heat

(mins)

-

-

-

-

-

117.0

145.0

Low level immersion elements

1

1

1

1

1

1

1

High level immersion elements

0

0

0

0

0

1

1

Standing

Loss

(kWh/day)

1.07

1.23

1.41

1.53

1.80

2.15

2.28

AquaFlo Solar Compatible

Product

Code

Solar Twin Coil

AF5150

AF5180

AF5210

AF5250

AF5300

Nominal

Capacity

(L)

150

180

210

250

300

Solar Direct

AF6150

AF6180

AF6210

AF6250

AF6300

150

180

210

250

300

Height

(mm) x

545 Dia

1102

1290

1478

1728

2041

1102

1290

1478

1728

2041

Weight

Empty

(kg)

40

45

48

53

63

38

42

45

51

60

Weight Vol within when Full 10ºC of set

(kg) temp (L)

187

222

255

300

359

186

220

253

299

358

Actual performance when installed will vary considerably dependant on the rate of solar or other renewable input, number of panels etc.

132

160

188

232

285

102

123

143

175

210

Indirect Heat

Exchanger

(kW)

-

-

-

-

-

18.55

18.55

22

22

22

Solar

Heat

Exchanger

16.46

18.55

18.55

22.00

22.00

Dedicated Recovery

Solar

Capacity solar

(mins)

77

95

101

107

121

25.0*

26.3*

31.2*

33.0*

41.0*

Boost re-heat

(mins)

12.0#

14.8#

15.5#

20.0#

25.0#

Low level High level immersion immersion elements elements

0

0

0

0

0

1

1

1

1

1

16.46

18.55

18.55

22.00

22.00

80

100

116

137

160

25.0*

26.3*

31.2*

33.0*

41.0*

72.0

82.0

96.0

117.0

145.0

1

1

1

1

1

1

1

1

1

1

* Re-heat times based on BS12897 parameters with an 80°C primary flow at 15 l/min.

# Using Indirect heat exchanger

Standing

Loss

(kWh/day)

1.41

1.53

1.80

2.15

2.28

1.41

1.53

1.80

2.15

2.28

93

94

Zip Tudor II

®

Over-sink or under-sink water heater

Open outlet for single point of use

5, 10 litre


Open outlet heater, for single point of use.

Externally adjustable temperature control with frost protection.

Manually re-settable cut-out.

Oversink models supplied complete with spout and valve.

Undersink models for connection to Zip open-outlet tapware only - see page 96.


CFC-free insulation.

Impact resistant, easy clean, white plastic casing.

Neon power-on indicator light.

Choice of 5 and 10 litre capacities.

Supplied complete with wall plugs and screws.

Rating

2.0 kW @ 230V.

Heating element

Embedded rod type.

Thermostat

Capillary type, adjustable

35˚C to 80˚C.

Inner container

Polypropylene tested to 1.5 bar.

Case

Impact resistant plastic.

Insulation

Moulded CFC-free polystyrene.

Approvals

WRAS, CE endorsed.

Warranty


Operation

Externally adjustable temperature control.

Neon light indicates when the power is ‘ON’.

Safety features

Open-outlet non-pressurised system.


Manually re-settable over-temperature safety cut-out.

Installation

Supplies hot water to a single outlet using spout or Zip vented taps. No need for expansion vessel or pressure relief valve.

Screws and wall fixings provided.

Plumbing

Can be connected to a rising main or to a cistern with a minimum working head of

3 metres.

Over-sink models are supplied with a

300mm open outlet spout and control valve.

Undersink models must only be connected to Zip open-outlet taps, (see page 96).

Over-sink and under-sink models are NOT interchangeable.

Electrical


Product Code

Zip Tudor II Oversin k

P4/52

P4/102

Zip Tudor II Undersink

P4/52UB

P4/102UB

Capacity

Litres

5.0

10.0

5.0

10.0

Thermal Loss kWh/day

Dimensions

W x H x D (mm)

0.32

0.40

0.32

0.40

255 x 215 x 390

310 x 265 x 440

255 x 215 x 390

310 x 265 x 440

95

Zip Contract II

®

Over-sink water heater

Open outlet for single point of use

5, 10 litre


Open outlet oversink water heater for single point of use.


Over temperature safety thermal fuse

(C2/50 and C2/100).

Remotely resettable over temperature protection (C3/50).

Supplied with inlet control valve and swivel outlet spout.

Impact resistant, easy clean, white plastic casing.

CFC-free insulation.

Choice of 5 or 10 litre capacity.

Capacities

5 litre, 10 litre.

Rating

2.0 kW @ 230V.

Heating element

Embedded rod type.

Thermostat


35˚C – 80˚C.

Inner container

Polypropylene tested to 1.5 bar.

Case

Impact resistant white plastic.

Insulation

Moulded, CFC free Polystyrene.

Approvals

WRAS, CE endorsed.

Warranty


Safety features

Safety cut out in the event of a thermostat failure.


Installation

All models should be wall mounted.

Screws and wall fixings provided.

Plumbing

Can be connected to a rising main or to a cistern with a minimum working head of

3 metres.

Supplied with a 300mm open outlet spout and water control valve.

Electrical


IEE regulations.

Zip Accessories

Vented Point of Use

C3/50 model C2/50 model

Product Code Capacity

Litres

Thermal Loss kWh/day

Dimensions

W x H x D (mm)

Zip Contract

C2/50

C2/100

*C3/50

5.0

10.0

5.0

0.32

0.40

0.32

255 x 215 x 390

310 x 265 x 440

255 x 215 x 390

* Specialist product for temporary site applications with remotely resettable dry start

protection. For details contact Zip Technical support.

96

*UB1

Monobloc mixer

*UB6

Single lever basin tap

*For use with Zip Tudor P4/52UB and P4/102UB

*UB7

Single lever sink tap

TS1

Telescopic spout

350-600mm

97

98

Zip RCH

®

Cistern-ty pe water heate

r

Single or multiple outlet

25, 50, 75, 100 litre


Patented design ensures the temperature of the water in the cistern tank is maintained within current regulatory limits.

Simple to install and maintain.

Trouble free operation.

Choice of 4 capacities.

Capacities


Rating

2.8 kW @ 230V

(5.6 kW option on 100 litre).

Heating element

Embedded rod.

Thermostat

Rod type, adjustable from 5ºC – 65ºC.

Water tank

Hot water tank and cold water feed cistern are both manufactured from copper sheet with brazed seams.

Case

Corrosion resistant, white powder coated steel.

Insulation

Fully fire-retardant foiled urethane core.

Safety features

Over temperature cut-out.

Approvals

WRAS, approval pending.

CE endorsed.

Warranty


Installation

Should be mounted on a wall at least one metre above the highest draw-off point.

Wall and fixings should be adequate to support the weight of the heater when full.

Heater to be fixed using the integral wall mounting bracket.

Top clearance of 150mm must be allowed for access to the ball valve in the cistern tank.

Bottom clearance of 250mm must be allowed for withdrawal of the heating element.

Plumbing

Cold inlet, left or right hand connection,

1⁄2 ” BSP.

Hot outlet, from base of heater, 22mm compression fitting.

Drain connection, supplied and fitted.

Overflow, left or right hand connection,

22mm compression fitting.

Ball valve is for mains pressure operation, brass body to BS1212-2.

Electrical

To be wired to a double pole switched fused spur with a minimum break capacity of 13 amps.

RCH 100/6 should be provided with its own dedicated supply.

Installation must comply with current IEE regulations. Supplied with 1 metre of cable.


Product

Code

Zip RCH

RCH25

RCH50

RCH75

RCH100

RCH100/6

Capacity

Litres

Rating kW @ 230V

Weight

Full (kg)

30.0

50.0

80.0

100.0

100.0

3.0

3.0

3.0

3.0

2 x 3.0

52

106

136

164

164

Dimensions

W x D x H

(mm)

470 x 210 x 705

600 x 320 x 750

600 x 320 x 925

600 x 320 x 1080

600 x 320 x 1080

99

Zip Hot Water

Typical applications

Zip Hot Water

General Data

100

Application

(Up to)

Single hand wash

1 basin

1 sink

2 basins

3 basins

1 basin, 2 sinks

3 basins, heavy use or 2 sinks

Suggested Page

Zip Products reference

ES3*, ES4*, ES6* 70

CEX

AP3/05, AP3/05/OB

74

80

P4/52, P4/52UB 94

C2/50 96

CEX* 74

DEX12* 76

AP3/30 86

VP303 88

CEX*

DEX12*

AP3/10, AP3/10/OB

VP103, VP103UB

AP3/15, AP3/15/OB

VP153, VP153UB

RCH25

DEX/DBX*

Useful formulae

Time to heat stored water (mins)

Temperature rise with an instantaneous water heater ( ˚C )

Temperature Degrees Celsius

Degrees Fahrenheit

=

Litres x Temp Rise (˚C)

kW rating x 14.3

=

14.3 x kW rating

Litres/min flow

= ( ˚F-32 ) x 5⁄9

= ( ˚C x 9⁄5 ) + 32

74

76

80

82

80

82

Pressure 1 Bar

Degrees Kelvin

Conversion factors

= 14.5 psi

98

= ( ˚C + 273.2 )

= 100 kiloNewtons/m 2 = 100 kPa

76 1 psi = 7 kPa

1 shower

1 bath & shower

1 bath & shower (4 beds)



DEX12* 76

DEX/DBX* 76

Bed-sit DEX/DBX* 76

AP3/100 86

VP953 88

AF3120, AF4090 90

RCH100 98

1 bath & shower (1-2 beds)


DEX/DBX*

AF3150, AF4120

AF3180, AF4150

76

90

90

AF3210, AF4180

AF3250, AF4210

AF3300, AF4250

90

90

90

Heat

DEX/DBX*

AP3/80

76

86

VP803 88

RCH75 98

Zip Heaters (UK) Ltd reserves the right to modify the specification of its products without notice and makes every effort to maintain the accuracy of information contained in this publication.

1 kiloCalorie (kCal) is the amount of energy required

to raise 1 kg of water through one degree Celsius

The terms ‘Zip’, ‘HydroTap’, ‘Hydroboil’, ‘Econoboil’, ‘Duo’, ‘Chilltap’, ‘Chillmaster’, ‘Wall

Fountain’, ‘Chill Fountain’, ‘Aquapoint’, ‘Varipoint’, ‘AquaFlo’, ‘Inline ES’, ‘InLine’, ‘Tudor’,

‘Contract’ and ‘RCH’ are all registered trademarks.

The Zip Product Guide November 2014

©Copyright Zip Heaters (UK) Ltd

N.B. These application suggestions are based upon the assumption that the incoming water supply temperature is 12°C.

For advice on product selection, if the incoming water temperature is likely to be lower, call our Technical Service Team on 0845 6 005 005

101

102

Notes

Notes

103

Tel: 0845 6 005 005

(for landline users)

Tel: 0345 6 005 005

(for mobile users)

Head Office:

Zip Heaters UK Ltd

Bertie Ward Way

Dereham

Norfolk

NR19 1TE

London Office:

Zip Heaters UK Ltd

Clover House

147-149 Farringdon Road

Clerkenwell

London

EC1R 3HN

Birmingham Office:

Zip Heaters UK Ltd

3A Orion Building

Navigation Street

Birmingham

B5 4AA

Manchester Office:

Zip Heaters UK Ltd

269-271 Deansgate

Manchester

M3 4EW

Brochure reference:

ZDL/2015/V2

User guide | Zip CH103 Product guide

The Zip Product Guide

The complete range of Zip products

Including the innovative, exciting

HydroTap G4

www.zipheaters.co.uk

Version 2

Introduction

Training

Prompt service

NEW for 2015

The new Zip HydroTap G4

The world’s most advanced drinking water system

Boiling

Chilled

Sparkling

Filtered

Instantly

Product Index

Drinking Water - Boiling

Drinking Water - Chilled

Hot Water

General data

Zip HydroTap

The most intelligent filtered drinking water system ever invented

Zip brings you the most intelligent filtered drinking water tap ever invented.

New under-sink Zip Command-Centre units are more compact

•

•

•

•

Zip HydroTap

technology

Superior technology saves energy and conserves water

Zip HydroTap

sustainability

Standing heat-loss energy consumption comparison

(tests for a 24 hour period with no draw-off)

Zip HydroTap

range

General Information—Commercial HydroTap

Zip HydroTap

range

The wide range of products available

Zip HydroTap

Boiling, chilled and sparkling filtered water

*

Zip HydroTap

Boiling and chilled filtered water

*

Zip HydroTap

Filtered boiling (B models)

& filtered boiling and ambient water (BA models)

Boiling and ambient tap

Boiling only tap

Boiling/ambient Boiling only

*

Zip HydroTap

Filtered chilled and sparkling water

Zip HydroTap

3-in-1, 4-in-1 & 5-in-1

Boiling, chilled and sparkling filtered drinking water PLUS hot, cold (ambient) or mixed warm water – from two taps

*

Zip HydroTap

All-in-One

(Commercial)

Boiling, chilled and sparkling filtered drinking water PLUS hot, cold (ambient) or mixed warm water – all from one tap

*

*

*

*

*

*

*

*

*

Zip HydroTap

in Industry

Heavy duty designs for industrial environments and institutions

Zip HydroTap