advertisement
▼
Scroll to page 2
of 4
ONY The New Line-Up of 3.5 inch Micro Floppydisk Drives (1.0MB/2.0MB) from the Industry s Leading Supplier + САУ “ОУ N SAN EE AECA E ah Innovative Technolo gy Sony has become the world's leading supplier of 3.5 inch Micro Floppydisk Drive since it first established the 3.5 inch Micro Floppydisk Drive as a new standard. Now adding the 2.0MB drive to its line-up, Sony is offering a full line-up of 3.5 inch Micro Floppydisk Drives which are produced on a state of the art production line. High performance is backed up by Sony’s reputation for reliability which assures OEM customers of a competitive edge. Furthermore, Sony's innovative technology has allowed the 2.0MB drive to read and write 1.0MB disks as well. Sony's experience in mass- producing bulk type heads for video tape recorders provided the technical expertise to develop an extremely reliable head for the MP-F series. Through the use of an erase gap, Sony's bulk type head achieves far better demagnetization and off-track characteristics than conventional heads. Sony minimizes the numbers of connectors and harnesses by using only one PCB in the slim line drive. The manufacture of this board is fully automated and uses a variety of Sony's leading production techniques such as surface mounting and laser soldering. One custom CMOS LSI is used to control all of the functions of the drive. This LS! contributes to the drives low power consump- tion, slim size, high reliability, and reduced number of elec- tronic parts. The lead screw is cut on the shaft of the stepping motor to avoid coupling the lead screw to the motor shaft. This unique control method reduces stepping motor hysterisis to virtually zero and achieves precise and reliable head positioning. The center of the disk motor is positioned with extreme accuracy by installing the rotor on the main chassis. The coils of the disk motor are directly mounted on the PCB which contributes to the drives slimness, and through the use of a digital servo control mechanism, accurate rotational speed is maintained. All components of the drive are laid out to take maximum advan- tage of Sony's robot technology. With only a single printed circuit, board, all adjustments and Inspections are performed using fully automated equipment, thereby further enhancing the quality and reliability of Sony's most advanced 3.5 inch floppy- disk drives. SPECIFICATIONS Model MP-F52W MP-F52W-00D MP-F53W MP-F53W-00D | MP-F63W-01D | MP-F73W-01 D 9 Double Sided Double Sided Double Sided Double sided Double Sided Double Sided Unformatted Recording Capacity 1.0 M bytes 1.0 M bytes 1.0 M bytes 1.0 M bytes 1.0 M bytes 2.0 M bytes 250 K bps (1 MB) Data Transfer Rate 500 K bps 500 K bps 250 K bps 250 K bps 250 K bps 500 K bps (2 MB) Rotational Speed 600 RPM 600 RPM 300 RPM 300 RPM 300 RPM 300 RPM Track to Track 6 ms 6 ms 6 ms 6 ms 3 ms 3 ms Access Time Settling 15 ms 15 ms 15 ms 15 ms 15 ms 15 ms Average 175 ms 175 ms 175 ms 175 ms 95 ms 95 ms Average Latency 50 ms 50 ms 100 ms 100 ms 100 ms 100 ms Motor-On to Ready Time 0.9 sec. max 0.9 sec. max 0.9 sec. max 0.9 sec. max 500 ms max. 500 ms max. Recording Density 8,717 BPI 8,717 BPI 8,717 BPI 8,717 BPI 8,717 BPI 17,434 BPI Number of Tracks 160 160 160 160 160 160 Track Density 135 TPI 135 [PI 135 TPI 135 TPI 135 TP! 135 TPI Encoding Method MFM MFM MFM MFM MFM MFM EE | 5°C 16 50°C | 5°Cto50°C | 5°Cto50°C | 5°Cto50°C | 5°Cto50°C | 5°C to 50°C mbient temperature | (40°F to 122°F) | (40°F to 122°F) | (40°F to 122°F) | (40°F to 122°F) | (40°F to 122°F) | (40°F to 122°F) Environmental | Relative Humidity 8% to 80% 8% to 80% 8% to 80% 8% to 80% 8% to 80% 8% to 80% Maximum Wet Bulb 29°C (85°F) 29°C (85°F) 29°C (85°F) 29°C (85°F) 29°C (85°F) 29°C (85°F) DC P Requi : +12V +5% +12V +5% +12V +5% +12V +5% +12V +5% +12V +5% ical in +5V +5% +5V +5% +5V +5% +5V +5% +5V +5% +5V +5% Stand-b 0.05 W 255 mW 0.05 W 255 mW 255 mW 255 mW Power RASS (CMOS Interface)| (TTL Interface) |(CMOS Interface), (TTL Interface) | (TTL Interface) | (TTL Interface) Dissipation A 2.6 W 28 W 26 W 28 W 28 W 28 W J (CMOS Interface)| (TTL Interface) (CMOS Interface), (TTL Interface) | (TTL Interface) | (TTL Interface) y Height 30 mm 30 mm 30 mm 30 mm 30 mm 30 mm Mechanical : Dimensions Width 101.6 mm 101.6 mm 101.6 mm 101.6 mm 101.6 mm 101.6 mm Depth 150 mm 150 mm 150 mm 150 mm 150 mm 150 mm Weight 480 g 480 g 480 g 480 g 480 g 480 g MTBF 10,000 POH 10,000 POH 10,000 POH 10,000 POH 10,000 POH 10,000 POH MTTR 30 min. 30 min. 30 min. 30 min. | 30 min. 30 min. Soft 1 in 10° bits 1 in 10° bits 1 in 10° bits 1 in 10° bits 1 in 10° bits 1 in 10° bits Error Rates Hard 1 in 10% bits 1 in 10% bits 1 in 10% bits 1 in 10 bits 1 in 10% bits 1 in 107 bits Seek 1 in 10° seeks | 1 in 10° seeks | 1 in 10° seeks | 1 in 10° seeks | 1 in 10° seeks | 1 in 10° seeks 2HD (2 MB type, 2.0 MB double sided, E 2DD (1 MB type, 2DD (1 MB type, | 2DD (1 MB type, | 2DD (1 MB type, | 2DD (1 MB type, 35” media) Media double sided, double sided, double sided, double sided, | double sided, 2DD (1 MB type 3.5” media 3.5” media 3.5” media 3.5” media 3.5” media 1.0 MB double sided, 3.5” media) (Specifications are subject to change without notice) Sony Corporation of America Component Products Division Disc Memory Group Sony Corporation 655 River Oaks Parkway, San Jose, California 95134 - Printed in Japan ©OSONY Telephone: (408) 432-0190 Fax: (408) 943-0740 Telex: 171331
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project