Belkin 8820ED00378_F7D4301_V1 Network Router User Manual
Add to My manuals40 Pages
Belkin el:Network Router 8820ED00378_F7D4301_V1 is a wireless router that allows you to connect multiple devices to the internet. It comes with a built-in firewall to protect your network from unauthorized access, and it supports the latest wireless standards for fast and reliable connections. You can also use the router to share files and printers with other devices on your network.
advertisement
Play Max
Wireless router
User Manual
8820ed00378_F7D4301_v1
English
Français
DEutsch nEDErlanDs
Table Of COnTenTs
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Advanced Tools & Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
The Belkin Router Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Manual Setup Using Your Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adding Computers to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Adding USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bundled Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Additional Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Getting to Know Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting, support, and Warranty . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Belkin International, Inc ., Limited 2-Year Product Warranty . . . . . . . . . 34
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
GeTTInG sTaRTeD
What’s in the box
Play Max Wireless Router
Ethernet cable (attached to router)
Power supply (attached to router)
Network information card (attached to router)
Belkin Setup CD with User Manual
Initial setup
Where to Place Your Router
For the best results, place the Router next to your modem in an open location away from large metal objects and magnets such as those found in speakers . Raising the Router above floor level can improve the strength of your wireless signal .
3
GeTTInG sTaRTeD
1
modem
2 3
4
GeTTInG sTaRTeD
1 . Connect your Router’s Ethernet cable to your modem’s Ethernet port (on the back of your modem) . This port might be labeled differently on your particular modem . If you are adding a
Router for the first time, this port may be connected to your computer by an Ethernet cable . It is OK to disconnect your computer and plug the Router into the modem instead .
2 . Plug the Router’s power supply into a wall outlet .
3 . Put the CD into your computer . If the CD doesn’t open automatically, please browse to your CD drive and double-click on the Belkin Setup CD icon .
Setup
4 . Click the Setup icon on the CD menu .
5
GeTTInG sTaRTeD
5 . After a brief installation, the setup software will ask you for the network name and password from the network information card that is attached to your Router . Store the card under the base of your Router for future reference .
6
GeTTInG sTaRTeD
7
6 . A progress screen will appear while additional software is installed . This may take a few minutes to complete . Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router .
During setup you may be asked for additional information .
You may need to enter a username and password provided by your ISP . This username and password is likely to be found on materials that came from your ISP when you signed up for service . If necessary, you may need to contact your ISP to retrieve your username and password .
If you have a static IP address, you may need to enter additional information also provided by your ISP .
If your computer doesn’t have a wireless adapter, or the setup software is unable to control it, you may be asked to connect your computer to the Router with a network cable .
GeTTInG sTaRTeD
advanced Tools & settings
After the initial setup is complete, you have the option to change settings like your network name, security type, and password . To make these changes and others, click on the
Advanced Tools icon at the CD Setup menu and select one of the following settings that you would like to change:
network name & security – Personalize your network name
(SSID), password, and strength of wireless security .
Internet service Provider & login settings – Have you moved or changed Internet Service Providers?
If you’d like to change these settings without running through the setup process again, this is the place .
8
GeTTInG sTaRTeD
The belkin Router Manager
Belkin.2234
Router Settings
User Manual
USB Print & Storage Manager
Memory Safe: Get Started!
Vuze
Daily DJ: Get Started!
Music Labeler
BitBoost: Auto
Check for Updates
Options
Exit
The Belkin Router Manager appears in your system tray
(Windows) or menu bar (Mac) . Its icon indicates the current status of your Router and also allows you to access your
Router’s settings to make changes . It also provides quick access to software that came bundled with your Router .
To access the Router settings, click on the icon and select from the menu that appears .
The status of your Router is shown by the Belkin Router Manager icon, which closely mimics the light on the front of the Router .
Green: You are connected to your Belkin Router and it is connected to the Internet .
amber: You are connected to your Belkin Router, but it is not connected to the Internet .
9
GeTTInG sTaRTeD
Manual setup Using Your browser
In your browser, type “http://router” (you do not need to type in anything else such as “www”) . Then press the Enter key . If you’re still having trouble running the manual setup option, type
“192 .168 .2 .1” in your browser (you do not need to type in anything else such as “http://” or “www”) . Then press the Enter key .
10
GeTTInG sTaRTeD
adding Computers to Your network
Wireless devices such as computers, network printers, and gaming systems can connect to your Router with a few simple steps .
Using the CD
1 . Put the Setup CD into your computer . If the CD doesn’t open automatically, browse to your CD drive and open the Belkin Setup CD icon .
2 . Click the Setup icon on the CD menu .
3 . After a brief installation, the setup software will ask you for the network name and password from the network information card that came with your Router . This card is most likely now located underneath the foot of your Router in the provided card slot .
4 . A progress screen will appear while additional software is installed . This may take a few minutes to complete . Once finished, a “Success” message will appear indicating that you are connected to the Internet via your new Belkin Router .
note: The setup software runs only on
Windows and Mac OS X systems .
11
GeTTInG sTaRTeD
Manually
If you choose not to use the included Setup CD for adding additional computers or wireless devices, you can manually add these items to your network .
1 . Locate the wireless-network-connections option on your computer or wireless device .
2 . Select your Belkin Router from the list of available networks . You can identify your Belkin Router by locating the network name
(SSID) from the card located underneath the foot of your Router .
3 . Enter your network password (located on your network information card) .
Your wireless device will take a few moments to connect to your network . If the connection is not made the first time, try this process again . If you still have difficulty connecting to your network after trying this process a few times, see the “Troubleshooting” section in this manual for help with connecting to your network .
note: In some cases you may be prompted to select the security type . It is printed on the card for your convenience .
Using the WPs button
1 . Start WPS Push Button Connection (WPS PBC) on your computer or other Wi-Fi device that you would like to connect wirelessly to your Router . Often there will be a button for this purpose in software that came with the device, or a physical
“WPS,” “PBC,” or “Security” button on the device itself .
2 . Within two minutes, press the WPS button on your Router .
The WPS light (small light above WPS button) will blink green while it listens for your Wi-Fi device . Once a connection is established, the light will turn green and then go out . If a connection is not established, the light will blink amber . You may repeat the process to try again .
You can repeat this process for each WPS-enabled device you’d like to add to your network .
12
GeTTInG sTaRTeD
adding Usb Devices
USB
13
GeTTInG sTaRTeD adding a Drive
You can share a USB hard drive or flash drive to your network via your Router’s USB port . Once connected, you can share files and music with other computers and devices within your network .
Plug your USB hard drive into the USB port on the back of your Router . When the light above the USB port is lit, your drive is available to computers on your network .
You can manually check the status of your shared drive by visiting the USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu bar (Mac) . If you have difficulty sharing a drive on your network, please see the “Troubleshooting” section of this manual .
adding a Printer
You can add a printer to your network via your Router’s
USB port . Once connected, you can print from various computers and wireless devices within your network .
Plug your printer’s USB cable into the USB port located on the back of your Router . When the light above the USB port is lit, your printer is available to computers on your network .
You can manually check the status of your printer by visiting the
USB Print and Storage Manager, found under the Belkin Router
Manager icon displayed in your system tray (Windows) or menu bar (Mac) . If you have difficulty sharing a printer on your network, please see the “Troubleshooting” section of this manual .
note: Each computer that will use the printer must have both the Belkin software and the printer’s driver installed .
If the print driver is not installed, you will be asked to install it by the Belkin USB Print and Storage Manager .
14
GeTTInG sTaRTeD adding Other Usb Devices
Other USB devices may also be shared via your Router .
Plug your device into the USB port located on the back of your Router . When the light above the USB port is lit, your device is available to computers on your network .
Computers running the Belkin USB Print and Storage Manager will be able to make use of the shared device by visiting the USB Print and Storage Manager, found under the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac) .
15
GeTTInG sTaRTeD
bundled software
Usb Print and storage Manager
The USB Print and Storage Manager helps to manage and monitor the use of your USB printers, scanners, hard drives, and other devices that are connected to your Router’s USB port and shared across your network . USB Print and Storage
Manager is found in the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac) .
When you have one or more USB devices attached to your
Router, the main actions for those devices are available directly from the Belkin Router Monitor menu .
Memory safe
Memory Safe allows you to set up a routine backup of your files to a hard drive or flash drive attached to your Router .
Memory Safe is found in the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac) .
Music labeler
Belkin Music Labeler corrects metadata (track names, artist names, track numbers, etc .) in your iTunes and Windows Media libraries, making it easy to find the music you are looking for .
Music Labeler is found under the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac) .
16
GeTTInG sTaRTeD
Daily DJ
Belkin Daily DJ delivers personalized playlists from your music collection, automatically, every day . It’s like having your own personal DJ playing the songs that you want to hear . It works great with iTunes and Windows Media Player . Daily
DJ is found under the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac) .
Vuze and Torrent Genie
Vuze is a media player for high-resolution digital videos that helps you to find, download, and play HD videos on your
PC, Mac, iPhone, iPod, Xbox 360, PS3, PSP, and TiVo .
Torrent Genie assists your Vuze downloads by continuing them in the background when your computer is asleep or offline . It requires that a USB hard drive or flash drive be plugged into your Router .
bit boost
Bit Boost allows you to improve the quality of a particular activity when your network is in heavy use . For instance, if you use your network for voice-over-IP (VoIP) calls, you can set Bit Boost to support this feature first and allocate the remainder of your bandwidth to other network applications . Bit Boost is found under the Belkin Router Manager icon displayed in your system tray (Windows) or menu bar (Mac) .
17
GeTTInG sTaRTeD
additional Capabilities
Guest access
You can allow guests to use your Internet connection without joining your personal network . The network name and password for the guest network is located on the network information card found under the foot of your Router .
A person using your guest network will be able to join without a password, but will be shown a login page when they attempt to surf the Web . They will need to enter the guest password into this page to continue .
Video Max HD
Video Max HD automatically prioritizes your network traffic to ensure high-quality streaming HD video, VoIP calls, and games .
Music Mover
Music Mover sends music from a USB drive attached to your
Router to any UPnP (Universal Plug-and-Play) or DLNA-compatible device on your network . These devices include certain gaming systems, televisions, Blu-ray players, and cell phones .
18
GeTTInG TO KnOW YOUR ROUTeR front Panel
(a)
(b) a) Router status light
Your Router’s status is shown by the light on the front .
Off: The Router is not plugged into a power source .
blinking Green: The Router is starting up .
solid Green: The Router is connected to the Internet .
blinking amber: The Router can’t detect the modem . Either the modem is off, is not plugged into the Router, or is unresponsive .
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers . To use the WPS feature on your Router, see “Getting Started > Adding
Computers to Your Network > Using the WPS Button” .
The small light near the WPS button shows what is happening while you are using WPS to establish a connection .
Off: Idle
blinking Green: The Router is listening for a
WPS-enabled computer or other device .
solid Green: The Router has made a secure connection with the computer or other device .
amber: A connection was not created .
19
GeTTInG TO KnOW YOUR ROUTeR
back Panel
(a)
(b)
(c)
(d)
(e) a) Modem (Wan) Connector
Connect your modem to this port using an Ethernet cable .
b) Wired (lan) Connectors
Connect computers and other wired network devices to these ports using Ethernet cables .
C) Usb Port
USB printers, disks, and other
USB devices plugged into this port will be shared on your network . Each USB port has a light that indicates its status .
Off: No USB device is connected or the attached
USB device is not in use .
blinking: Please wait to unplug the device until the light turns off .
On: The USB device is connected and being shared on your network .
D) Reset button
This button is used to restart your Router in rare cases when it functions incorrectly . Resetting the Router will preserve your settings . This button may also be used to restore the factory default settings . Please see the Troubleshooting section for more information .
e) Power Connector
Connect the included power supply to this jack .
20
TeCHnICal DeTaIls
Technical features
Integrated 802 .11n Wireless access Point
Utilizing Dual-Band Network technology, your Router creates two separate networks (one at 2 .4GHz band and the other at 5GHz band), allowing increased bandwidth to all your connected wireless devices and computers .
naT IP address sharing
To save you the cost of adding IP addresses per computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to share a single IP address across your network .
sPI firewall
Your Router is equipped with a firewall that will protect your network from a wide array of common attacks and viruses .
UPnP aV Mediaserver
Easily share the media contents, such as photographs, movies, or music, stored in your USB storage device with other digital media players, such as Microsoft® Xbox®,
Sony® PS3™, etc ., that support the UPnP protocols .
Universal Plug-and-Play (UPnP) Compatibility
The UPnP (Universal Plug-and-Play) feature in your Router offers seamless operation of voice and video messaging, games, and other applications that are UPnP-compliant .
Web-based advanced User Interface
You can easily make changes to your Router’s advanced settings through your web browser . These changes can be made from any computer on your network .
belkin Router Monitor
The Belkin Router Monitor application helps you to monitor your Router’s status and change network settings .
Integrated 4-Port Gigabit switch
Your Router has a built-in, 4-port network switch to allow your wired computers to share printers, data, MP3 files, digital photos, and much more at speeds of up to one gigabit per second .
Dual Usb Ports
Two USB ports let you plug in printers, hard drives, and other USB devices to share across your network .
21
TeCHnICal DeTaIls system Requirements
Router
Broadband Internet connection such as a cable or
DSL modem with RJ45 (Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
setup software
A computer running Windows
Windows Vista
®
XP SP2 and higher,
®
32 and 64 bit, or
Windows 7 32 and 64 bit; or Mac OS
®
X, 10 .5 and 10 .6
Minimum 1GHz processor and 256MB RAM
600MB of free hard-drive space for installation
Memory safe and Usb Print and storage Manager
Windows
®
XP SP2 and higher,
Windows Vista
Windows 7 32 and 64 bit; or Mac OS
®
®
32 and 64 bit, or
X, 10 .5 and 10 .6
Minimum 1GHz processor and 256MB RAM
50MB of free hard-drive space for installation
22
TeCHnICal DeTaIls
Daily DJ, Music labeler, and Vuze
Daily DJ, Music Labeler, and Vuze
PC
Windows XP SP2 or higher, Windows Vista, or Windows 7
2GHz processor
1GB of RAM
DirectX
®
9 .0-compliant video and sound
Internet Explorer
®
or Firefox
®
Mac
®
Mac OS X v10 .5 or later
Intel
®
Core™ Duo 1 .83GHz or higher processor
1GB of RAM
Safari
®
or Firefox
200MB of free hard-drive space for installation
23
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
Troubleshooting
The setup CD does not automatically start .
If Belkin Setup does not run when you insert the CD-ROM, your computer may not be configured to open CDs automatically .
If Belkin Setup does not appear within 15 seconds, browse to your CD-ROM drive and open the “Belkin Setup” icon .
Alternatively, you may visit http://router/ and perform the setup manually . Please see “Manual Setup Using Your
Browser” earlier in this manual for more information .
belkin setup cannot find my Router .
If Belkin Setup is not able to communicate with your Router during the installation process, please check the following items .
1 . Make sure that the wireless hardware on your computer is turned on, if available .
2 . Try connecting your computer to one of the four “wired” ports on the Router with an Ethernet cable .
3 . Ensure that the Router is on . The front-panel light should be on .
4 . Unplug the Router’s power supply for 10 seconds, then plug it back in .
5 . There may be firewall software on your computer preventing an outgoing connection . You may choose to temporarily disable this software before attempting setup .
If Belkin Setup still cannot find the Router, you might choose to do a manual setup . Refer to “Manually Configuring
Network Settings” in this manual for details .
24
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup cannot connect my Router to the Internet .
If Belkin Setup is not able to connect the Router to the Internet, please check the following items:
1 . Use the troubleshooting suggestions within Belkin Setup .
2 . If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly . Some user names require that the ISP’s domain may be at the end of the name . Example: “myname@myisp .com” . The “@myisp .com” part of the user name may need to be typed as well as your user name .
3 . If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method .
belkin setup completed installation, but I cannot browse the
Web . The light on the front of my Router is blinking amber .
1 . Make sure the Router is connected to your modem with an
Ethernet cable via the Router’s one WAN (modem) port .
2 . Unplug the modem from its power source and make sure that it goes dark . Then reapply power to the modem .
3 . Unplug your Router’s power supply, wait 10 seconds, and plug it back in . This will cause the Router to try to reestablish communication with the modem .
25
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup completed installation, but I cannot browse the
Web . The light on the front of my Router is solid amber .
1 . Use the troubleshooting suggestions within Belkin Setup .
2 . If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly . Some user names require that the ISP’s domain may be at the end of the name . Example: “myname@myisp .com” . The “@myisp .com” part of the user name may need to be typed as well as your user name .
3 . If you have a static connection, your ISP will have assigned you an IP address, subnet mask, and gateway address . Please re-run Belkin Setup and enter this information when a static connection is mentioned .
4 . You may need to configure your Router to meet the specific requirements of your ISP . To search our knowledge base for ISP-specific issues, go to: http://www .belkin .com/support and type in “ISP” .
5 . If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method .
I can’t connect to the Internet wirelessly .
If the light on the front of the Router is solid green, then your
Router is connected to the Internet . You may not be connected to the Router’s wireless network . Please refer to “Adding
Computers to Your Network” in this manual for instructions .
26
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
I can’t connect to the Internet wirelessly and my network name is not listed in available networks .
1 . Verify that your Router is on and the front-panel light shows solid green .
2 . If you are far from the Router, you might try moving closer to see if you might have been out of range .
3 . Using a computer attached to the Router via a network cable, visit http://router/ and ensure that “Broadcast SSID” is ON .
This setting is found on the “Channel and SSID” page .
My wireless network performance is slow, inconsistent, suffers from weak signal, or I’m having difficulty maintaining a
VPn connection .
Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases .
Other factors that will cause signal degradation (metal is generally the worst culprit) are obstructions such as walls and metal appliances . Note also that connection speed may decrease as you move farther away from the Router .
In order to determine if wireless issues are related to range, we suggest temporarily moving the computer within 10 feet from the Router if possible .
Changing the wireless channel—Depending on local wireless traffic and interference, switching the wireless channel of your network can improve performance and reliability . See the section titled “Changing the Wireless
Channel” for instructions on how to choose other channels .
27
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
limiting the wireless transmit rate—Limiting the wireless transmit rate can help improve range and connection stability . Most wireless cards have the ability to limit the transmission rate . To change this property in Windows, go to the Windows Control Panel, open “Network
Connections”, and double-click on your wireless card’s connection . In the properties dialog, select the “Configure” button on the “General” tab, then choose the “Advanced” tab and select the rate property .
Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable . Experiment with different connection rates until you find the best one for your environment . Note that all available transmission rates should be acceptable for browsing the Internet . For more assistance, see your wireless card’s user manual .
I’ve installed this new Router and some of my network clients
(computers, game consoles, etc .) are now unable to connect .
Your new Router came pre-configured with a network name and password, found printed on an attached card . All clients must use this network name and password to connect wirelessly to your Router .
You will need to find the network settings on your client, select the network name printed on the card from the list of available networks, and enter the password when prompted to join the wireless network .
28
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
Does the Router support Wireless
Protected access (WPa) security?
The Router ships with WPA/WPA2 security turned on .
Windows XP and some older network hardware may require a software update to support WPA/WPA2 .
I am having difficulty setting up WPa security on my Router .
1 . Log in to your Router by visiting http://router/ with your web browser .
Click on the “Login” button in the top right-hand corner of the screen . You will be asked to enter your password . If you have never set a password, leave the “Password” field blank and click “Submit” .
2 . Click “Wireless” in the left-hand menu . Then click “Security” just below that .
3 . Select the “WPA/WPA2” option .
4 . Enter a password . This can be from 8–63 characters of your choice, including spaces and punctuation, OR a 64-digit hexadecimal number (using only the numbers 0–9 and letters A–F) .
5 . Click “Apply Changes” to finish . Your wireless connection is now encrypted . Each computer using your wireless network will need to use the new key .
note: If you are configuring the Router over a wireless connection, you will have to re-connect to the
Router after changing any security settings .
note: Some older networking hardware supports only WEP encryption . If your older computers cannot connect to your network, try 128-bit or 64-bit WEP, or seek software updates from their manufacturers .
29
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
I am having difficulty setting up Wired equivalent
Privacy (WeP) security on my Router .
1 . Log in to your Router . Visit http://router/ with your web browser .
Click on the “Login” button in the top right-hand corner of the screen . You will be asked to enter your password . If you have never set a password, leave the “Password” field blank and click “Submit” .
2 . Click “Wireless” in the left-hand menu . Then click “Security” just below that .
3 . Select the “128-bit WEP” option .
4 . You may type in a WEP key manually, or generate one from a passphrase . Type a phrase in the “Passphrase” field and click the “Generate” button . A WEP key is composed of 26 hexadecimal digits (0–9, A–F . . For example, C3 03 0F AF
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key .
5 . Click “Apply Changes” to finish . Your wireless activity is now encrypted . Each computer using your wireless network will need to use the new key .
note: If you are configuring the Router over a wireless connection, you will have to re-connect to the
Router after changing any security settings .
note: Some older networking hardware supports only 64-bit WEP encryption . If your older computers cannot connect to your network, try 64-bit WEP .
30
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
a disk I plugged into the Usb port is not showing up on my computer or in Memory safe .
1 . Is the light on over the USB port that the disk is plugged into?
If not, try unplugging and re-plugging the disk . Please check that the USB connector is firmly plugged into the Router .
2 . If your disk has an optional power supply, please use it while the disk is attached to your Router .
3 . The Router supports FAT16, FAT32-, or NTFS-formatted disks . Disks in other formats will not appear in the
Finder (Mac OS X) or Windows Internet Explorer .
a printer I plugged into the Usb port is not showing up on my computer .
1 . Is the light on over the USB port that the printer is plugged into?
If not, try unplugging and re-plugging the printer . Please check that the USB connector is firmly plugged into the Router .
2 . To print to a printer attached to the Router, your computer must have that printer’s driver installed .
Please check that the driver is installed .
3 . The printer may not be set to auto-connect . Via the Belkin Router
Manager, open the USB Print and Storage Center . Check that the printer appears in the list of available devices . View the properties of the printer, and check that “auto-connect” is selected .
31
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
a different sort of Usb device that I plugged into the
Usb port is not showing up on my computer .
Most USB devices other than disks and printers must be accessed via the USB Print and Storage Center .
1 . Is the light on over the USB port that the device is plugged into?
If not, try unplugging and re-plugging the device . Please check that the USB connector is firmly plugged into the Router .
2 . Via the Belkin Router Manager, open the USB
Print and Storage Center . Check that the device appears in the list of available devices .
3 . Select the device and click the “Use” button . The device will be virtually connected to your computer until you choose to “Stop
Using” the device, or another person requests use of the device .
32
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
Technical support
You can find technical-support information on our website, www .belkin .com
, by navigating to the tech-support section .
If you want to contact technical support by phone, please call the number you need from the list below*:
*Local rates apply .
Country
AUSTRIA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
GREECE
HUNGARY
ICELAND
IRELAND
ITALY
LUXEMBOURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
SOUTH AFRICA
SPAIN
SWEDEN
SWITZERLAND
UNITED KINGDOM
OTHER COUNTRIES
33 number
0820 200766
07 07 00 073
239 000 406
701 22 403
0972519123
08 - 25 54 00 26
0180 - 500 57 09
00800 - 44 14 23 90
06 - 17 77 49 06
800 8534
0818 55 50 06
02 - 69 43 02 51
34 20 80 85 60
0900 - 040 07 90 €0 .10 per minute
81 50 0287
00800 - 441 17 37
707 200 676
495 580 9541
0800 - 99 15 21
902 - 02 43 66
07 - 71 40 04 53
08 - 48 00 02 19
0845 - 607 77 87
+44 - 1933 35 20 00
Internet adress
www .belkin .com/de/networking/ www .belkin .com/nl/networking/ www .belkin .com/fr/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/fr/networking/ www .belkin .com/de/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/it/networking/ www .belkin .com/uk/networking/ www .belkin .com/nl/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/uk/networking/ www .belkin .com/networking/ www .belkin .com/uk/networking/ www .belkin .com/es/networking/ www .belkin .com/uk/networking/ www .belkin .com/de/networking/ www .belkin .com/fr/networking/ www .belkin .com/uk/networking/
TROUblesHOOTInG, sUPPORT, anD WaRRanTY belkin International, Inc ., limited
2-Year Product Warranty
What this warranty covers .
Belkin International, Inc . (“Belkin”) warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship .
What the period of coverage is .
Belkin warrants the Belkin product for two years .
What will we do to correct problems?
Product Warranty .
Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product) .
Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products . In the event that Belkin is unable to repair or replace the product (for example, because it has been discontinued), Belkin will offer either a refund or a credit toward the purchase of another product from Belkin .com in an amount equal to the purchase price of the product as evidenced on the original purchase receipt as discounted by its natural use .
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with . The Belkin Product Warranty does not protect against acts of God such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (i .e . brownouts or sags), non-authorized program, or system equipment modification or alteration .
34
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
How to get service .
To get service for your Belkin product you must take the following steps:
1 . Contact Belkin Tech Support at the number listed on page 31, within 15 days of the Occurrence . Be prepared to provide the following information: a . The part number of the Belkin product .
b . Where you purchased the product .
c . When you purchased the product .
d . Copy of original receipt .
2 . Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim .
Belkin reserves the right to review the damaged Belkin product .
All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser . If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment . The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser . Damaged equipment must remain available for inspection until the claim is finalized . Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have .
35
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
How state law relates to the warranty .
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
BELKIN . THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY .
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you .
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,
SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR
MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO,
LOST BUSINESS OR PROFITS ARISING OUT OF THE
SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES .
This warranty gives you specific legal rights, and you may also have other rights, which may vary from state to state . Some states do not allow the exclusion or limitation of incidental, consequential, or other damages, so the above limitations may not apply to you .
36
ReGUlaTORY InfORMaTIOn fCC statement
DeClaRaTIOn Of COnfORMITY WITH fCC RUles fOR eleCTROMaGneTIC COMPaTIbIlITY
We, Belkin International, Inc ., of 501 West Walnut Street, Compton,
CA 90220, declare under our sole responsibility that the device,
F7D4301 v1, complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation .
Caution: exposure to Radio frequency Radiation .
The device shall be used in such a manner that the potential for human contact normal operation is minimized
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment . This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body .
federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation .
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications .
However, there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help.
• FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment .
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter .
37
ReGUlaTORY InfORMaTIOn
Canada-Industry Canada (IC)
The wireless radio of this device complies with RSS
139 & RSS 210 Industry Canada . This Class B digital apparatus complies with Canadian ICES-003 .
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device .
Cet appareil numérique de la classe B conforme
á la norme NMB-003 du Canada .
europe
European Union Radio products with the CE or CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community .
Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards) .
• EN 60950-1:2006 (IEC60950-1) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 301 489 General EMC requirements for radio equipment.
Information
Products with the CE marking comply with the EMC Directive
(2004/108/EC) and the Low Voltage Directive (2006/95/
EC) issued by the Commission of the European Community .
Compliance with these directives implies conformity to the following European Product Family Standards .
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN 55024-1 – Electromagnetic Immunity
• EN 61000-3-2 (IEC610000-3-2) – Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950-1 (IEC60950-1) – Product Safety
Products that contain the radio transmitter are sometimes labeled with the Notified Body number (CE0560) or CE alert marking if the standard used in the conformity is not harmonized across the European Community .
38
ReGUlaTORY InfORMaTIOn
EU DECLARATION OF CONFORMITY
Español
[Spanish]
ǼȜȜȘȞȚțȒ
[Greek]
Français
[French]
Italiano
[Italian]
Latviski
[Latvian]
Lietuviǐ
[Lithuanian]
ýesky
[Czech]
Dansk
[Danish]
Deutsch
[German]
Eesti
[Estonian]
English
Nederlands
[Dutch]
Malti
[Maltese]
Magyar
[Hungarian]
Polski
[Polish]
Português
[Portuguese]
Slovensko
[Slovenian]
Slovensky
[Belkin Ltd] tímto prohlašuje, že tento [F7D4301] je ve shodČ se základními požadavky a dalšími pĜíslušnými ustanoveními smČrnice 1999/5/ES.
Undertegnede [Belkin Ltd] erklærer herved, at følgende udstyr [F7D4301] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt [Belkin Ltd], dass sich das Gerät [F7D4301] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie
1999/5/EG befindet.
Käesolevaga kinnitab [Belkin Ltd] seadme [F7D4301] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, [Belkin Ltd], declares that this product [F7D4301] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Por medio de la presente [Belkin Ltd] declara que el [F7D4301] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ȂǼ ȉǾȃ ȆǹȇȅȊȈǹ [Belkin Ltd] ǻǾȁȍȃǼǿ ȅȉǿ [F7D4301] ȈȊȂȂȅȇĭȍȃǼȉǹǿ ȆȇȅȈ ȉǿȈ ȅȊȈǿȍǻǼǿȈ ǹȆǹǿȉǾȈǼǿȈ Ȁǹǿ ȉǿȈ ȁȅǿȆǼȈ ȈȋǼȉǿȀǼȈ ǻǿǹȉǹȄǼǿȈ ȉǾȈ ȅǻǾīǿǹȈ 1999/5/ǼȀ.
Par la présente [Belkin Ltd] déclare que l'appareil [F7D4301] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Con la presente [Belkin Ltd] dichiara che questo [F7D4301] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo [Belkin Ltd Belkin Ltd ] deklarƝ, ka [F7D4301] / iekƗrtas tips] atbilst DirektƯvas 1999/5/EK bnjtiskajƗm prasƯbƗm un citiem ar to saistƯtajiem noteikumiem.
Šiuo [Belkin Ltd] deklaruoja, kad šis [F7D4301] atitinka esminius reikalavimus ir kitas 1999/5/EB
Direktyvos nuostatas.
Hierbij verklaart [Belkin Ltd] dat het toestel [F7D4301] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, [Belkin Ltd], jiddikjara li dan [F7D4301] jikkonforma mal-ƫtiƥijiet essenzjali u ma provvedimenti oƫrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, [Belkin Ltd] nyilatkozom, hogy a [F7D4301] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym [Belkin Ltd] oĞwiadcza, Īe [F7D4301] jest zgodny z zasadniczymi wymogami oraz pozostaáymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Belkin Ltd] declara que este [F7D4301] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
[I Belkin Ltd] izjavlja, da je ta [F7D4301] v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloþili direktive 1999/5/ES.
[Belkin Ltd] týmto vyhlasuje, že [F7D4301] spĎĖa základné požiadavky a všetky príslušné
[Slovak]
Suomi
[Finnish]
Svenska
[Swedish]
Íslenska
[Icelandic]
Norsk
[Norwegian] ustanovenia Smernice 1999/5/ES.
[Belkin Ltd] vakuuttaa täten että [F7D4301] tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Härmed intygar Belkin Ltd] att denna [F7D4301] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Hér með lýsir [Belkin Ltd] yfir því að [F7D4301] er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
[Belkin Ltd] erklærer herved at utstyret [F7D4301] er i samsvar med de grunnleggende krav og
øvrige relevante krav i direktiv 1999/5/EF.
http://www .belkin .com/doc/
For information on product disposal please refer to http://environmental .belkin .com
39
FOR USE IN
IT LV LT
NO CH BG
AT
LU
RO
BE
MT
TR
CY
NL
Restricted Use in Certain Countries
CZ
PL
DK
PT
EE
SK
FI
SI
FR
ES
DE
SE
GR
GB
HU
IS
IE
LI
OPERATES ON CHANNELS 1-13 (2.4Ghz)
OPERATES ON CHANNELS 36-48 (5Ghz)
Class 2 Equipment
© 2010 Belkin International, Inc . All rights reserved . All trade names are registered trademarks of respective manufacturers listed . Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries .
8820ed00378_F7D4301_v1
Belkin Ltd.
Express Business Park
Shipton Way, Rushden
NN10 6GL, United Kingdom
Belkin Iberia
C/ Anabel Segura, 10 planta baja, Of. 2
28108, Alcobendas, Madrid
Spain
Belkin SAS
130 rue de Silly
92100 Boulogne-Billancourt,
France
Belkin Italy & Greece
Via Carducci, 7
Milano 20123
Italy
Belkin GmbH
Hanebergstrasse 2
80637 Munich
Germany
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk,
Netherlands
advertisement
Key Features
- Wireless router for connecting multiple devices to the internet
- Built-in firewall to protect your network from unauthorized access
- Supports the latest wireless standards for fast and reliable connections
- Can be used to share files and printers with other devices on your network
Related manuals
Frequently Answers and Questions
What is the Belkin el:Network Router 8820ED00378_F7D4301_V1?
What are the key features of the Belkin el:Network Router 8820ED00378_F7D4301_V1?
How do I set up the Belkin el:Network Router 8820ED00378_F7D4301_V1?
How do I add devices to my network?
advertisement
Table of contents
- 3 Getting started
- 3 What’s in the Box
- 3 Initial Setup
- 8 Advanced Tools & Settings
- 9 The Belkin Router Manager
- 10 Manual Setup Using Your Browser
- 11 Adding Computers to Your Network
- 13 Adding USB Devices
- 16 Bundled Software
- 18 Additional Capabilities
- 19 Getting to Know Your Router
- 19 Front Panel
- 20 Back Panel
- 21 Technical Details
- 21 Technical Features
- 22 System Requirements
- 24 Troubleshooting, support, and Warranty
- 24 Troubleshooting
- 34 Belkin International, Inc ., Limited 2-Year Product Warranty
- 37 Regulatory Information
- 37 FCC Statement