Fujitsu | User manual | 24V DRIVEN RECEIPT PRINTER UNIT 2” PRINTER UNIT FTP-622UCL510 / USL547 ■
Add to My manuals5 Pages
Fujitsu FTP-622UCL510 is a 24V driven receipt printer unit with a cutter for 2 inch wide paper. It combines a high-speed FTP-622 MCL mechanism, cutter, and control board with an integrated paper feed and built-in paper guide section. It's a great choice for applications such as POS, ATM, and receipt and ticket issuing printers for various other equipment. Key features include:
- Unit supported (mounting is easy)
- High speed printer (80mm / sec.)
- Auto cutter included
- Paper near end-detection function
- Low power consumption
advertisement
24V DRIVEN RECEIPT PRINTER UNIT
2” PRINTER UNIT
FTP-622UCL510 / USL547
■
OVERVIEW
The FTP-622 UCL/USL Series is 24V driven receipt printer unit with cutter for 2 inch wide paper. The unit has our high-speed
FTP-622 MCL mechanism, cutter and control board, with an integrated paper feed and built-in paper guide section.
The receipt printer unit is most suitable for applications such as
POS, ATM, and receipt and ticket issuing printers for various other equipment.
■
FEATURES
• Unit supported (mounting is easy)
• High speed printer (80mm / sec.)
• Auto cutter included
• Paper near end-detection function
• Low power consumption
■
DESIGNATION
Printer module
Interface
Cables
Item
Parallel (Centronics)
Serial (RS-232C)
Parallel interface
Serial interface
Power for head, motor and logic
Part number
FTP-622UCL510 *1
FTP-622USL547 *2
FTP-622Y201
FTP-622Y301
FTP-622Y401
*1: Interface board is FTP-622DCL111
*2: Interface board is FTP-622DSL112
1
FTP-622UCL510 / USL547
■
SPECIFICATIONS
Item Specifications
Part number
Printing method
Dot structure
Dot pitch (Horizontal)
FTP-622UCL510
Thermal-sensitive line dot method
448 dots/line
0.125 mm (8 dots/mm)—Dot density
FTP-622USL547
Dot pitch (Vertical)
Effective printing area
0.125 mm (8 dots/mm)—Line feed pitch
56 mm
Paper width
Paper thickness
Cutting type
Number of columns
Maximum printing speed
60 to 100
µ m
Full or partial
37 columns/line (24
×
12 dot font)
640 dotlines/s (80 mm/s, 50mm/s, 30mm/s)
Character types
Character composition, dimensions (H
×
W),
Number of characters
Alphanumeric KANA: 159 International characters: 195
JIS KANJI (FTP-622DCL111, DSL112): approximately 6800
24
×
12 dots, (3.0
×
1.5 mm), 37 columns
24
×
24 dots, (3.0
×
3.0 mm), 18 columns
16
×
8 dots, (2.0
×
1.0 mm), 56 columns
16
×
16 dots, (2.0
×
2.0 mm), 28 columns
Interface
For head
Parallel Serial RS232C
24VDC
±
5%, Voltage
Current : average *1 ( ): Peak
0.87 (1.16) A (at 80 mm/s printing speed, 25% printing ratio)
0.63 (1.16) A (at 50 mm/s printing speed, 25% printing ratio)
0.58 (0.58) A (at 30 mm/s printing speed, 25% printing ratio)
Power supply
For motor
24VDC
±
5%, 1.0 A maximum
For cutter
Dimensions
For logic 5VDC
±
5%, 0.5 A maximum
130(W)
×
144(D)
×
170 (H) mm
Weight (Mechanism + Cutter) Approximately 1 kg
Pulse durability : 1
×
10
8
pulse/dot (using Fujitsu Takamisawa's standard
Mechanism driving method)
Expected life
Wear resistance: 50 km (at 25% printing ratio)
Cutter 300,000 cuts
(Continued)
2
FTP-622UCL510 / USL547
(Continued)
Environmental conditions
Item
Operating temperature 0 to +50
°
C *2
Operating humidity
Storage temperature
Specifications
20 to 85% RH (no condensation)
–20 to +60
°
C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Paper out/Mark detect By photointerrupter Detection
Head-up
Near end paper
By microswitch
By mechanical switch
Recommended thermal sensitive paper
For front insertion use (58 mm width) : FTP-020P0701/P0102
Recommended papers
· Oji Paper
· NIPPON Paper
: PD150R,PD160R-N,PD170R
: TF50KS-E,TF60KS-E,
· MITSUBISHI Paper Mills
TF50KS-E4
: P220VBB-1,AFP-235
*1: 24VDC, minimum head resistance.
*2: Guarantee: +5
°
C to +40
°
C.
3 .
4 .
1 .
2 .
5 .
6 .
■
FUNCTIONS
I t e m
T
P
P e s a p a p t e e p r r r i o n n t u e t f a r u d e n e t c n e t d i o c t d i n o n e t e c t i o n
H e a d u p d e t e c t i o n
T h e r m a l h e a d t e m p e r a t u r e a b n o r m a il t y d e t e c t i o n
B l o w o u t f u s e d e t e c t i o n
1 1 .
1 2 .
7 .
8 .
9 .
1 0 .
I t e m
H e a d v o l t a g e a b n o r m a il t y d e t e c t i o n
C u t t e r a b n o r m a il t y d e t e c t i o n
M o t o r p o w e r s a v i n g f u n c t i o n
M a r k d e t e c t i o n f u n c t i o n
M C U o p e r a t i o n a b n o r m a il t y d e t e c t i o n
B a r c o d e
■
INTERFACE , COMMAND, OPTIONS
Please refer to the FTP-622DCL111 for the FTP-622UCL510, and the FTP-622DSL112 for the
FTP-622DSL547.
Interface command options, please see FTP-622DCL/DSL datasheet.
3
■
DIMENSIONS
Integrated unit
FTP-622UCL510 / USL547
Note:
1. Nominal value
2. Distance from paper roll to enclosure must be 20mm for loading.
3. Basic reference line.
4
FTP-622UCL510 / USL547
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
www.fcal.fujitsu.com
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 11/15/2004.
5
advertisement
Related manuals
advertisement