Item #

Model 839A

Automatic Gravity Feed Slicer

Model 839A

Safety and Convenience Features

Berkel Model 839A automatic gravity feed slicer features Berkel’s hollow ground chromium-plated, carbon steel knife and built-in, single lever, dualaction sharpener with convenient handle located on the sharpener cover. The permanent, tapered guard covers the non-slicing portion of the knife even when the center plate is removed. The 45

°

table with gauge plate interlock and front mounted, articulating pusher and fence make product feed easier, creating more consistent and uniform slices with less waste. The single-speed carriage operates at 52 slices per minute.

The 1/2 HP motor, 14” knife and large product table are ideal for handling oversize meats, cheeses and a variety of other products. The 839A slicer is easy to clean and disassembles quickly without tools.

Standard Features

➤ Separate 1-speed, 1/2 HP, totally enclosed

and permanently lubricated motors for the knife

and carriage

➤ Furnished in 115/60/1, 5.8 amp, AC, ETL listed

➤ Carriage speed is 52 slices per minute

➤ Finish is stainless steel and sanitary anodized aluminum; unit disassembles quickly without tools for easy cleaning

➤ 45 °

Product table with gauge plate interlock. Front mounted, articulating pusher and fence

➤ Nominal 14” (350 mm) diameter; hollow ground, hardened and polished forged chromium-plated carbon steel knife

➤ Carriage handles food up to 11” (280 mm) wide, by

8-1/2” (216 mm) high or 8-1/2” (216 mm) diameter

➤ Precise slice adjustment to a thickness of 3/4” (19 mm)

➤ Built-in, non-removable, top-mounted, two stone knife sharpener with single lever, dualaction system

➤ Permanent, tapered knife ring guard covers nonslicing portion of knife even when the center plate is removed; ring guard design provides more room behind the knife for easy cleaning

➤ No-Volt release prevents activation of the slicer in the event of a power interruption; operator must restart the slicer

➤ Positive, moisture protected, on/off switches and power indicator light

➤ Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle

Approved By:

Date

Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700

574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com

Form #SPC04-0902N

Model 839A

Automatic Gravity Feed Slicer

Model No. Cutting Carriage Slice Knife Product Dimensions

Capacity Speed Thickness Diameter Width A Depth B Height C

839A 11” (280mm) wide 52 SPM to 3/4” 14”

8-1/2” (216 mm) high

8-1/2” (216 mm) dia

(19 mm) (350mm)

25” 29”

(635 mm) (737 mm)

29”

(737 mm)

Motor

1-speed

1/2 HP

Electrical Weight Box Dimensions

Width Depth Height

115/60/1 Net 138 lbs. (63 kg.) 34” 30” 37”

Ship 170 lbs. (77 kg) (864 mm) (762 mm) (940 mm)

Specifications

Motors: Separate 1-speed, 1/2 HP, totally enclosed motors for the knife and carriage, permanently lubricated ball bearings, thermally protected.

Electrical: Furnished in 115/60/1, 5.8 amp, AC,

ETL listed.

Carriage Speed: 52 slices per minute.

Finish/construction: All food contact areas are stainless steel or anodized aluminum including the pusher, gauge plate, product table, center plate, knife ring guard and one-piece base. Slicer disassembles quickly without tools for easy cleaning.

Knife: Nominal 14” (350 mm) diameter, hollow ground, hardened and polished forged chromiumplated carbon steel.

Cutting Capacity: Carriage handles food up to 11”

(280 mm) wide by 8-1/2” (216 mm) high or 8-1/2”

(216 mm) diameter

Slice Thickness: Precision system provides infinite slice adjustment and consistent cuts of hard or soft foods from tissue thin to 3/4” (19 mm).

Full Gravity Feed: Full 45

°

angle feed with GPI requres less mechanical pressure. Equipped with a front-mounted, articulating, anodized aluminum pusher and fence to hold product with less waste.

Knife Sharpener: Built-in, top-mounted, two stone, single lever, dual-action system for a lasting, razor-sharp edge.

Knife Ring Guard: Permanent, tapered guard covers non-slicing portion of knife edge even when the center plate is removed. The ring guard is designed to provide added room behind the knife for easy cleaning.

A

C

B

No-Volt Release: Prevents activation of the slicer in the event of a power interruption. Operator must restart the slicer.

On/Off Switch: Highly reliable, moisture resistant, on/off switches and power indicator light.

Cord and Plug: Attached 6-foot, flexible, 3-wire cord and plug for grounded receptacle.

Warranty: All parts, service and travel coverage for one year, excluding wear items.

As we continually strive to improve our products, specifications are necessarily subject to change without notice.

Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700

574-232-8222 • 800-348-0251 • FAX 888-888-2838 • www.berkel.com

Form #SPC04-0902N © 2002 Berkel Company Litho in U.S.A.