advertisement
▼
Scroll to page 2
Model X13A © Features Berkel model X13A automatic gravity feed slicer offers a number of special features. A sanitary one piece engineered polymer base and product table reduces seams and joints while providing an FDA approved surface for easy, effective cleaning. A removable and submersible table mounted sharpener with borazon stones for accurate sharpening. Completely mechanical, gauge plate interlock. Precise thickness control is achieved using a variable pitch barrel cam for fine adjustment and wafer thin slices. The index knob and operating controls are mounted outside of the drip zone for quick and easy. The slicer can be automatically operated in 3 speeds, and with 3 different stroke lengths. A permanent ring guard protects the entire non-slicing portion of the knife during slicing and cleaning. A fence is included with the product table. A simple kick stand supports the slicer for easy access to clean under the slicer. Accessories OU Vegetable chute with pusher Ud Skewers with coring tool QU Slaw tray Approved By: Date Item # Model X13A Automatic Gravity Feed Slicer Standard features > 1-speed, 1/2 HP, permanently lubricated ball bearing Knife motor with thermal protection » Automatic operation in three speeds; 20, 40 or 60 slices/minute » Three stroke lengths; 1/3, 2/3 and full stroke » Furnished in 115/60/1, 7 amps, AC, with 3 wire cord and plug (see below for optional voltages) » LED indicates power to the slicer » One-piece FDA polymer base and product table for reduced seams, accessibility and easy cleaning » Index knob conveniently located outside the drip zone In the upper left to provide quick and easy access » Variable pitch barrel cam for ultra fine, precise slice adjustment to a thickness of 1-5/16" (34mm) » 13" (330mm) diameter, hollow ground, hardened and polished forged stainless steel knife > Large product table with extra capacity: O Rectangles up to 10-72" x 6-34" (265 mm x 170 mm) O Squares up to 7-72" (190 mm) O Rounds up to 8-2" (220 mm) diameter > Articulating and full length rear mounted meat pusher to secure and advance products evenly, fence to hold product during automatic operation > Ergonomic, multi-grip handle to advance product table > Submersible, removable product table mounted sharpener for consistent sharpening and easy cleaning » Borazon sharpening stones for fast, accurate sharpening and extended life > No-volt release requires restarting the slicer after a power interruption » Permanent ring guard protects entire non-slicing portion of the knife » Sealed start/stop switches conveniently located on the Index knob housing out of the food zone » Mechanical interlock for reliably securing the gauge plate during cleaning > Simple kick stand for easy cleaning under the slicer Power Options Q 1/2 HP, 220/50/1, 3.5 amps, AC, ETL Listed Q 1/2 HP, 220/60/1, 3.5 amps, AC, ETL Listed Berkel Company * 4406 Technology Drive * South Bend, IN 46628-9700 574-232-8222 « 800-348-0251 *« FAX 888-888-2838 * www.berkel.com Form BK45733 (06-07) < с = С = 2 о) <. < = D D el 0 = D S O Q Dv >, mi æ > < 9p т X © Le, O > D 2 0 © D D LL 5 = У e © но e © = Berkel Model X13A Automatic Gravity Feed Slicer Model | Cutting Slice Knife Product Dimensions No. Capacity Thickness | Dia. Width A Depth B Height C X13A | Rect. 10-1/2" x 6-3/4" (265 x 170 mm) 1-5/16" 13” 28" 29" 25” Square 7-1/2" (190 mm) (34 mm) (330 mm) | (710 mm) | (735 mm) | (635 mm) Round 8-1/2" (220 mm) Motor Electrical | Weight Box Dimensions Width Depth Height 1-speed 115/60/1 | Net 98 Ib (44 kg) 20-1/2' 31 25-1/2" 1/2 HP 7 amps Ship 128 Ib (58 kg) (675 mm) (780 mm) (650 mm) SPECIFICATIONS Motors: Knife motor is 1-speed, 1/2hp totally enclosed and permanently lubricated ball bearings, thermally protected. Table motor is brushless DC providing three fixed speeds, 20, 40 or 60 slices per minute. Three stroke lengths in the automatic mode, provide more slices/minute at the same speed. Electrical: Furnished in 115/60/1, 7 amp, AC, ETL Listed, with 3-wire cord and plug. Power options noted on page 1. Finish/Construction: Base, product table, pusher, support arm and upper housing are constructed of FDA approved, engineered polymers reducing the number of seams. Gauge plate and center plate are anodized aluminum. All controls are sealed and located out of the drip zone. Knife: 13" (330mm) diameter, hollow ground, hardened and polished stainless steel. Knife Sharpener: Removable and submersible table mounted, two stone, dual action design to ensure correct pressure and contact angle are always applied, thus reducing knife wear and delivering a perfect edge. Borazon stones last longer, sharpen faster and clean easier. Thickness Control: Index knob controls a precision, variable pitch barrel cam with ultra-fine adjustment in the first revolu- tion and opens to a thickness of 1-5/16" (34 mm) for accurate and consistent slicing. This control is located out of the drip zone on the upper left to provide quick and easy access for operation and cleaning. Gauge Plate Interlock: Mechanical interlock using twisted wire, aircraft cables. Table must be in the home position and gauge plate closed to remove table. Once table is removed, the gauge plate can not be opened. Berkel Company * 4406 Technology Drive * Cutting Capacity: Shown in chart above. Product Table: Full gravity feed 45° angle with articulating rear mounted pusher that runs the entire length of the table to secure product for increased yield and consistency in every slice. A fence provides stability for the product in automatic mode. Kick Stand: A simple kick stand supports the slicer for easy access to clean under the slicer. No-voit Release: Requires restarting the slicer in the event of a power interruption. Knife Ring Guard: Permanent tapered guard covers the non-slicing portion of the knife edge. Controls: Sealed push-button switches located on the index knob housing out of the drip zone. Warranty: Parts, labor and travel coverage for one year, exclusive of wear items. As we continually strive to improve our products, specifications are necessarily subject to change without notice. South Bend, IN 46628-9700 574-232-8222 800-348-0251 + FAX 888-888-2838 * www.berkel.com Form BK45733 (06-07) O 2007 Berkel Company Litho in USA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement