Quick Reference Guide

Q-Wash 560Z-LED QRG

About

This Guide

The Q-Wash 560Z-LED Quick Reference Guide (QRG) contains the product’s connection and mounting information, as well as the menu options and the DMX values.

Refer to this product’s User Manual for detailed information and instructions. You can download the User Manual from the

CHAUVET® website: www.chauvetpro.com

.

Disclaimer

Read ALL the disclaimers and Safety Notes in this document, as well as those in the product’s User Manual before installing, operating, or maintaining this product.

Safety

Notes

DO NOT open this product unless instructed. It contains no user serviceable parts.

DO NOT look at the light source when this product is on.

DO NOT touch the product when it is operating because it may be hot.

DO NOT cover the ventilation slots when the product is operating to avoid internal overheating.

DO NOT install or operate this product where there is less than 50 cm to the nearest surface to allow adequate ventilation around it.

DO NOT leave any flammable material within 50 cm from this product while operating or connected to the power outlet to minimize the risk of fire.

DO NOT carry this product from the head. Use the handles instead.

DO NOT mount this product overhead without using a safety cable.

DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it.

DO NOT operate this product if you see damage on the housing, lenses, or cables. In any of these cases, have the damaged parts replaced by an authorized technician at once.

DO NOT connect this product to a dimmer or rheostat.

ONLY connect this product to a grounded and protected circuit.

What Is

Included

One Q-Wash 560Z-LED

One IEC Power Cord with Edison Plug (US market)

One Safety Cable

Two Omega Brackets

Warranty Card

Quick Reference Guide

Page 2 of 8

Q-Wash 560Z-LED QRG

Features

AC Power

Mounting

Fuse

Replacement

Product

Mounting

Diagram

12 or 15-channel RGBWA LED moving yoke wash product

Pan: 540

Tilt: 270

RGBWA color static mixing with or without DMX control

Vector speed channel for RGBWA color mixing

Variable zoom

Variable electronic strobe

Continuously variable electronic dimmer (0~100%)

Built-in automated programs

Remote product reset and vector speed channel

255-step fully customizable program

Recall auto or custom programs via control panel or DMX

Color temperature presets (3,200~10,000 K)

This product has an auto-ranging power supply that works with an input voltage range of 100~240 VAC, 50/60 Hz.

1. Disconnect the unit from the power outlet.

2. With a flat head screwdriver, wedge the fuse holder out of the housing and remove the blown fuse from the holder.

3. Replace the blown fuse with a fuse of the exact same type and rating.

4. Insert the fuse holder back in place and reconnect the power.

Before mounting this product, read the Safety Notes at the beginning of this guide and on page 2 of the product’s User Manual. Then, follow the mounting procedure indicated in the Setup chapter of the User Manual.

Overhead Mounting

Safety cable (included)

C Clamps (not included)

Omega brackets (included)

Floor Mounting

Page 3 of 8

Q-Wash 560Z-LED QRG

Menu Options

1 st

Level 2 nd

Level

INTRO

INVERT

RANGE

SPECIAL

EDIT

3 rd

Level Description

ADDRESS

RESET

FAN

RUN

CHANNELS

DISPLAY

Power

Color

Fan

001~512 Selects a starting DMX address

NO/YES Resets the product’s custom settings

HIGH Select the fan’s operation mode.

NORMAL

LOW

NOTE: Product’s controller will force the fan to High if the product’s internal temperature becomes too high, despite any

AUTO manual or DMX setting

DMX512 Selects DMX running mode

AUTO 1 Selects the first automatic program

AUTO 2 Selects the second automatic program

CUSTOM Selects the user customizable program

SLAVE Selects the Slave running mode

TEST Starts the product’s test sequence

BASIC Selects the 11-channel DMX mode

ADVANCED Selects the 15-channel DMX mode

60 CLOSE Turns off the display after 60 seconds

BRIGHT Keeps the display on

KEYLOCK

DIMMER

INFO

Pan

Tilt

Dimmer

Use

P/Start

NO/YES Activates/deactivates the control panel password

DIMMER 4~1 Slow (DIM 4) to fast (DIM1) dimmer curves

DIMMER 0 Linear dimmer

EDITION Shows the version of the installed S/W

NORMAL/

REVERSE

Defines the pan direction

Defines the tilt direction

Defines the direction of the dimmer fader

NO/YES Activates the changes

Sets the pan start point (restricted range)

P/Finish

T/Start 000~255

Sets the pan end point (restricted range)

Sets the tilt start point (restricted range)

T/Finish

Use

Sets the tilt end point (restricted range)

Activates the changes

Black delay NO/YES Activates the move-in black delay (3 s)

DMX

Reset

The DMX controller can reset the product

SYSTEM The control panel can reset the product

NORMAL/

HIGH

LEDs illuminate at normal or high intensity

NOTE: Product will return to Normal if temperature becomes too high

UC White output matches that of older products

RGBTOW White output set by RGB-W

OFF

DMX

White output defined by RGBW faders

The DMX controller can set the fan speed

SYSTEM The control panel can reset the fan speed

STEP Selects the program step

PAN

TILT

SPEED

RED 000~255

Selects the pan position

Selects the tilt position

Selects the pan/tilt speed

GREEN

BLUE

WHITE

AMBER

Combines red, green, blue, white, and amber to obtain a custom color

Continues in the next page

Page 4 of 8

Q-Wash 560Z-LED QRG

Continued from previous page

1st Level 2nd Level 3rd Level

EDIT

(Cont.)

DIMMER

STROBE

ZOOM

DIMSPEED

TIME

USE

EXTRA PASSWORD

Extra Menu

Description

000~255

Selects the dimmer value

Selects the strobe frequency and mode

Select the zoom position

Selects the dimmer speed

Selects the step duration

No/Yes Activates the changes

**** Opens the Extra menu (see below)

1 st

Level 2nd Level 3rd Level 4 th

Level

Calib

Default

3200 K

3400 K

4200 K

4900 K

5600 K

5900 K

6500 K

7200 K

8000 K

8500 K

10000 K

RGB-W

Default

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

Red

Green

Blue

No/Yes

Description

000~255 Sets color temperature for Macro > White 1

000~255 Sets color temperature for Macro > White 2

000~255 Sets color temperature for Macro > White 3

000~255 Sets color temperature for Macro > White 4

000~255 Sets color temperature for Macro > White 5

000~255 Sets color temperature for Macro > White 6

000~255 Sets color temperature for Macro > White 7

000~255 Sets color temperature for Macro > White 8

000~255 Sets color temperature for Macro > White 9

000~255 Sets color temperature for Macro > White 10

000~255 Sets color temperature for Macro > White 11

000~255 Sets color temperature for Special > Color > RGBtoW

Defaults the product to factory settings N/A

Page 5 of 8

Q-Wash 560Z-LED QRG

DMX Values

BASIC

Channel Function

1

2

3

4

5

6

7

8

9

Pan

Tilt

Red

Green

Blue

White

Amber

Power and Color

Macro

Dimmer

10 Strobe

11 Zoom

12 Control

Value Percent/Setting

000  255 0~540º

000  255 0~270º

000  255 0~100%

000  255 0~100%

000  255 0~100%

000  255 0~100%

000  255 0~100%

000  005 No function

006  010

011  030

High power

R: 100% G: Up B: 0%

031  050

051  070

071  090

091  110

R: Down G: 100% B: 0%

R: 0%

R: 0%

R: Up

G: 100% B: Up

G: Down B: 100%

G: 0% B: 100%

111  130

131  150

151  170

171  200

201  205

206  210

211  215

216  220

221  225

226  230

231  235

236  240

241  245

246  250

251  255

R: 100% G: 0%

R: 100% G: Up

B: Down

B: Up

R: Down G: Down B: 100%

R: 100% G: 100% B: 100% W: 100%

White 1: 3200 K

White 2: 3400 K

White 3: 4200 K

White 4: 4900 K

White 5: 5600 K

White 6: 5900 K

White 7: 6500 K

White 8: 7200 K

White 9: 8000 K

White 10: 8500 K

White 11: 10,000 K

000  255 0~100%

000  009

010  255

No function

01~20 Hz

000  255 6~37º

000  019

020  039

040  059

060  079

080  099

100  119

120  139

140  149

150  159

160  169

170  179

180  199

200  219

220  235

236  239

240  243

244  247

248  251

252  255

No function

Pan/tilt black activation

Pan/tilt black deactivation

Automatic fan speed

Slow fan speed

Normal fan speed

High fan speed

Auto program 1 (3 s activation delay)

Auto program 2 (3 s activation delay)

Test (3 s activation delay)

Custom program (3 s activation delay)

No function

Reset (3 s activation delay)

No function

DIM0 (3 s activation delay)

DIM1 (3 s activation delay)

DIM2 (3 s activation delay)

DIM3 (3 s activation delay)

DIM4 (3 s activation delay)

Page 6 of 8

Q-Wash 560Z-LED QRG

ADVANCED

Channel Function

1

2

3

4

5

Pan

Value Percent/Setting

000  255 0~540º

Pan Fine

Tilt

000  255 Fine movement control

000  255 0~270º

Tilt Fine 000  255 Fine movement control

Pan/Tilt Speed 000  255 Fast~Slow

6

7

8

9

Red

Green

Blue

White

10 Amber

000  255 0~100%

000  255 0~100%

000  255 0~100%

000  255 0~100%

000  255 0~100%

11

Power and Color

Macro

12 Dimmer

000  005

006  010

011  030

031  050

051  070

071  090

091  110

111  130

131  150

151  170

171  200

201  205

206  210

211  215

216  220

221  225

226  230

231  235

236  240

241  245

246  250

251  255

No function

High power

R: 100% G: Up B: 0%

R: Down G: 100% B: 0%

R: 0% G: 100% B: Up

R: 0% G: Down B: 100%

R: Up G: 0% B: 100%

R: 100% G: 0% B: Down

R: 100% G: Up B: Up

R: Down G: Down B: 100%

R: 100% G: 100% B: 100% W: 100%

White 1: 3200 K

White 2: 3400 K

White 3: 4200 K

White 4: 4900 K

White 5: 5600 K

White 6: 5900 K

White 7: 6500 K

White 8: 7200 K

White 9: 8000 K

White 10: 8500 K

White 11: 10,000 K

000  255 0~100%

13 Strobe

14 Zoom

15 Control

000  009

010  255

No function

01~20 Hz

000  255 6~37º

000  019

020  039

040  059

060  079

080  099

100  119

120  139

140  149

150  159

160  169

170  179

180  199

200  219

220  235

236  239

240  243

244  247

248  251

252  255

No function

Pan/tilt black activation

Pan/tilt black deactivation

Automatic fan speed

Slow fan speed

Normal fan speed

High fan speed

Auto program 1 (3 s activation delay)

Auto program 2 (3 s activation delay)

Test (3 s activation delay)

Custom program (3 s activation delay)

No function

Reset (3 s activation delay)

No function

DIM0 (3 s activation delay)

DIM1 (3 s activation delay)

DIM2 (3 s activation delay)

DIM3 (3 s activation delay)

DIM4 (3 s activation delay)

Page 7 of 8

Q-Wash 560Z-LED QRG

Control

Panel

Description

Button Function

<MENU> Exits from the current menu or function

<ENTER>

Enables the currently displayed menu or sets the currently selected value into the selected function

<UP>

Navigates upwards through the menu list and increases the numeric value when in a function

Navigates downwards through the menu list and

<DOWN> decreases the numeric value when in a function

Programming

For details on how to program this product, please refer to the product’s

User Manual.

Password

After being prompted to enter the password, press:

<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>

Contact

Us

World Headquarters

CHAUVET®

General Information

Address: 5200 NW 108th Avenue

Sunrise, FL 33351

Voice:

Fax:

(954) 929-1115

(954) 929-5560

Toll free: (800) 762-1084

Technical Support

Voice:

Fax:

Email:

(954) 929-1115 (Press 4)

(954) 756-8015 [email protected]

World Wide Web www.chauvetpro.com

United Kingdom and Ireland

CHAUVET® Europe Ltd.

General Information

Address: Unit 1C

Brookhill Road Industrial Estate

Pinxton, Nottingham, UK

NG16 6NT

Voice:

Fax:

+44 (0)1773 511115

+44 (0)1773 511110

Technical Support

Email: [email protected]

World Wide Web www.chauvetlighting.co.uk

Outside the US, United Kingdom, or Ireland, contact your distributor of record. Follow their instructions to request support or to return a product.

Visit our Web site for contact details.

Q-Wash 560Z-LED QRG – Rev. 06

© Copyright 2011 CHAUVET®

All rights reserved.

Printed in the P. R. C.

Page 8 of 8