Electro-Voice 358 Microphone User Manual

 SPECIFICATIONS
Weight:
56.7 g (2 07)
Material:
Lexan and polypropylene
Finish:
Black
otand Thread:
0/8 —27 standard
DESCRIPTION AND APPLICATIONS
The Electro-Voice Model 358 Micro-
phone Stand Adapter (microphone
clamp) is designed to allow mounting of
a microphone with tapered case
diameter on a microphone stand with
5/8'—27 threads. The Model 358 may
be used with Electro-Voice Microphone
Models PL88, PL21A, 629, 660, 671
and 681.
[iso in.) > Ba 225m) —]
“NI a
| Ces | 358 |
\\ 7) |
ASH Ct TZ
M EN
| 77.8 mm (7 \ \ \
| | | (3.06 in.) Ne =
Cl ; lee) |
ВАС e]
|
| |
; Y Ca a)
FIGURE 1 — Dimensions
Electro-Voice”
Model 308
Microphone
РАЦ
The Model 358 offers positive grip of the
microphone while allowing easy in and
out action. A cushion at the base of the
clamp is provided so that slip in action
with a live microphone can be
accomplished with a minimum of noise.
The clamp may be rotated approximately
180 degrees to provide easy orientation
of the microphone to any angle.
Constructed of durable Lexan and
polypropylene, the Model 358 clamp
provides a positive non-slip grip for the
microphone. Use of this non-metallic
material prevents marring or scratching of
the microphone case. The clamp is
designed to allow quick change from
hand held to stand use.
Specifications subject to change
without notice.
Part Number 535724 — 227
a Gulton sowas ELECTRO-VOICE, Inc. 600 CECIL ST., BUCHANAN, MICH. 49107
MANUFACTURING PLANTS AT B BUCHANAN, MICH. B NEWPORT, TENN. B SEVIERVILLE, TENN. B GANANOQUE, ONT. B LITHO IN U.S.A.