- Industrial & lab equipment
- Electrical equipment & supplies
- Power generators
- Generac Power Systems
- 5340
- User manual
Generac Power Systems 5340 Portable Generator User Manual
Add to my manuals
Generac Power Systems 5340 is a standby power generator designed to provide emergency power during utility outages. It is powered by a 2.4L engine and has a standby rating of 45 kW. The 5340 is equipped with a variety of features that make it easy to use and maintain, including a state-of-the-art control system, a Whisper-Test™ for low noise level exercise, and a high flow low noise factory engineered exhaust system. The 5340 is also UL 2200 Listed and meets all applicable safety standards.
advertisement
Standby Power Rating
45 kW 60 Hz CA
Liquid Cooled
Gas Engine
Generator Sets
South Coast Air Quality Management District (SCAQMD)
Emission Certifi ed For Standby Generator Application
Model Number: 5340 (Steel - Tan)
Whisper-Test™
Low Speed Exercise
61 dB(A) at 23 feet
GENERAC 2.4L ENGINE
Naturally Aspirated
Gaseous Fueled
UL 2200 Listed
Transfer Switch is sold separately
STANDARD EQUIPMENT
• All input connections in one single area
• High coolant temperature shutdown
• Low oil pressure shutdown
• Low coolant level automatic shutdown
• Overspeed automatic shutdown
• Watertight state of the art electrical connectors
• Radiator drain extension
• Battery charge alternator
• 2 Amp static battery charger
• Battery rack and battery cables
• Fan and belt guards
• Flex fuel line pigtail
• Emission certified in standby application (200 hrs/yr) • Closed coolant recovery system
• UV/Ozone resistant hoses
FEATURES
• Innovative design and fully prototype tested
• Solid state frequency compensated voltage regulator
• Dynamic and static battery charger
• Sound attenuated acoustically designed enclosure
• Whisper-Test™ for low noise level exercise
• High flow low noise factory engineered exhaust system
• State of the art control system with R-Series digital control panel
• High efficiency, low distortion Generac designed alternator
• Vibration isolated from mounting base
• Matching Generac transfer switches engineered and tested to work as a system
• All components easily accessible for maintenance
• Electrostatically applied textured powder paint
• Acoustically designed engine cooling system
• Exhaust catalyst and air/fuel ratio controller
APPLICATION
& ENGINEERING DATA
STANDBY 45 kW CA
GENERATOR SPECIFICATIONS ENGINE SPECIFICATIONS
TYPE ...........................................................................................................Synchronous
ROTOR INSULATION .......................................................................................... Class H
STATOR INSULATION ......................................................................................... Class H
TOTAL HARMONIC DISTORTION ........................................................................... <5%
TELEPHONE INTERFERENCE FACTOR (TIF) ........................................................<50
ALTERNATOR OUTPUT LEADS 3 PHASE ........................................................... 4 wire
BEARINGS .................................................................................................... Sealed Ball
COUPLING .................................................................................................. Flexible Disc
LOAD CAPACITY (STANDBY RATING) ................................................................ 45 kW
EXCITATION SYSTEM ........................................................................................... Direct
MAKE ................................................................................................................ Generac
MODEL ................................................................................................................. Inline 4
CYLINDERS ...................................................................................................................4
DISPLACEMENT .............................................................................. 2.4 Liter, 146 cu. in.
BORE ........................................................................................................................3.41
STROKE ....................................................................................................................3.94
COMPRESSION RATIO ...........................................................................................8.5:1
INTAKE AIR SYSTEM ....................................................................... Naturally Aspirated
VALVE SEATS .......................................................................................Precision ground
LIFTER TYPE ....................................................... Overhead Valve Push Rod, Hydraulic
NOTE: Generator rating and performance in accordance with
ISO8528-5, BS5514, SAE J1349, ISO3046, and DIN6271 standards.
GOVERNOR SPECIFICATIONS
TYPE ................................................................................................................Electronic
FREQUENCY REGULATION ....................................................................... Isochronous
STEADY STATE REGULATION .......................................................................... ± 0.25%
VOLTAGE REGULATOR
TYPE ................................................................................................................Electronic
SENSING ................................................................................................... Single Phase
REGULATION .......................................................................................................... ± 1%
FEATURES ............................................................................................... V/F Adjustable
Adjustable Voltage and Gain
ENGINE LUBRICATION SYSTEM
OIL PUMP ................................................................................................................Gear
OIL FILTER ............................................................................. Full flow spin-on cartridge
CRANKCASE CAPACITY ...................................................................................4 Quarts
GENERATOR FEATURES
Revolving field heavy duty generator
Directly connected to the engine
Operating temperature rise 120 °C above a 40 °C ambient
Insulation is Class H rated at 150 °C rise
All models are fully prototyped tested
ENGINE COOLING SYSTEM
TYPE ................................................................................................ Pressurized Closed
WATER PUMP .................................................................................................Belt driven
FAN SPEED .............................................................................................................2060
FAN DIAMETER ............................................................................................... 22 inches
FAN MODE ........................................................................................................... Pusher
CONTROL PANEL FEATURES
SEVEN LED INDICATOR LIGHTS ADDITIONAL FUNCTIONS
• System ready • Utility sensing
• Low fuel pressure
• Low battery
• Low oil pressure
• Delay on utility failure for engine start
• Engine warm-up before transfer
• Delay to retransfer to utility
• High coolant temp/low coolant temp • Engine cooldown timer
• Overspeed • Exerciser not set
Overcrank
FUEL SYSTEM
FUEL TYPE .......................................................................... Natural gas, propane vapor
CARBURETOR...............................................................................................Down Draft
SECONDARY FUEL REGULATOR ................................................................... Standard
FUEL SHUT OFF SOLENOID .......................................................................... Standard
OPERATING FUEL PRESSURE ..................................................................5” - 14” H2O
INTERNAL FUNCTIONS:
• 3 position switch (auto, off and manual)
• 2 wire start for any transfer switch
• Communicates with the Generac RTS transfer switch
• Built-in 7 day exerciser
• Selectable engine speed at exercise
• Governor controller is built into the master control board
• Temperature range -40 ° C to 70 °C
ELECTRICAL SYSTEM
BATTERY CHARGE ALTERNATOR .............................................................12V 30 Amp
STATIC BATTERY CHARGER .............................................................................. 2 Amp
RECOMMENDED BATTERY ...........................................................Group 26, 525 CCA
SYSTEM VOLTAGE ............................................................................................. 12 Volts
Rating definitions - Standby: Applicable for supplying emergency power for the duration of the utility power outage. No overload capability is available for this rating. (All ratings in accordance with
BS5514, ISO3046 and DIN6271). (All ratings in accordance with BS5514, ISO3046, ISO8528 and DIN6271).
STANDBY 45 kW CA
OPERATING DATA
KW RATING
ENGINE SIZE
GENERATOR OUTPUT VOLTAGE/KW - 60Hz
120/240V, 1-phase, 1.0 pf
KW
45
STANDBY 45 kW CA
45
2.4 Liter
AMP
187.5
CB Size
200
GENERATOR LOCKED ROTOR KVA
AVAILABLE @ VOLTAGE DIP OF 35%
ENGINE FUEL CONSUMPTION (Natural Gas) (Propane) Natural Gas
(ft
3
102
100
Propane
25% of rated load
50% of rated load
75% of rated load
100% of rated load
194
373
520
720
ENGINE COOLING
Air flow (inlet air including alternator and combustion air) ft
3
/min. 2,725
System coolant capacity US gal. 3.0
1.11
2.12
4.07
5.67
7.86
40.4
77.1
148
206.3
286
Heat rejection to coolant
Max. operating air temp. on radiator
Max. ambient temperature
BTU/hr.
°C (°F)
°C (°F)
173,000
60 (150)
50 (140)
COMBUSTION AIR REQUIREMENTS
Flow at rated power 60 Hz
SOUND EMISSIONS IN DBA cfm
db(A) @ 23 feet in exercise mode
db(A) @ 23 feet at normal operating load
EXHAUST
Exhaust flow at rated output 60 Hz cfm
Exhaust temp. at muffler outlet °F
ENGINE PARAMETERS
Rated synchronous RPM
HP at rated KW
60 Hz
60 Hz
144
61
73
429
1150
3600
71
POWER ADJUSTMENT FOR AMBIENT CONDITIONS
3% for every 10 °C above - °C
1.65% for every 10 °F above - °F
1% for every 100 m above - m
3% for every 1000 ft. above - ft.
25
77
183
600
RATING: All single phase units are rated at 1.0 power factor. STANDBY RATING: Standby ratings apply to installations served by a reliable utility source. The standby rating is applicable to varying loads for the duration of a power outage. There is no overload capability for this rating. Ratings are in accordance with ISO-3046-1. Design and specifications are subject to change without notice. Maximum wattage and current are subject to and limited by such factors as fuel Btu content, ambient temperature, altitude, engine power and condition, etc.
INTERCONNECTIONS
STANDBY 45 kW CA
INSTALLATION LAYOUT
UNIT WEIGHT: Steel 1414 lbs.
GENERAC ® POWER SYSTEMS, INC. • P.O. BOX 297 • WHITEWATER, WI 53190 www.guardiangenerators.com
Bulletin 0174810SBY / Printed in U.S.A. 05.07
© 2007 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project