advertisement
®*
AGE 8+
82656/82653 Asst.
Metal Driger
™
HIGH PERFORMANCE TOPS
Includes unassembled BEYBLADE top, launcher, and ripcord.
Assembly required. No tools needed.
WARNING: Do not use BEYBLADE®* tops or BEYSTADIUM
™
on tables or other elevated surfaces.
BEYBLADE tops/BEYSTADIUM are intended to be used on the floor. Do not lean over the stadium when BEYBLADE tops are in play. BEYBLADE tops may bounce up and hit eye or face.
• Before assembly and playing, please read instructions. Please keep these instructions for future reference.
• When removing parts from runner frame, ask an adult to help you trim off any excess plastic using scissors or other suitable tool.
• The frame is numbered. Please follow the numbers carefully and make sure you are assembling the right parts.
• Discard plastic bags immediately.
PARTS:
Runner Frame
Parts, Attack Ring,
Solid Metal Core,
Weight Disk, Blade
Base and Sticker
Sheets
BUILD:
1
Attach the stickers as shown in the diagram.
Bit Chip
Attack Ring
BEYSTADIUM sold separately.
2
Snap both halves of Right Spin Gear
é around Solid Metal Core. Make sure Solid Metal Core and é are in grooves.
®*
®*
Â
GE 8+
82656/82653 Asst.
Metal Driger
™
TOUPIES À HAUTE
PERFORMANCE
Contient une toupie BEYBLADE non assemblée, un propulseur et une tige cannelée.
Assemblage requis, sans l’aide d’outils.
MISE EN GARDE: Ne te sers pas des toupies ou des arènes
BEYBLADE sur une table ou toute autre surface surélevée.
Les toupies et les arènes BEYBLADE doivent être utilisées sur le sol. Ne te penche pas au-dessus de l’arène pendant que les toupies y tournoient, car celles-ci peuvent rebondir hors de l’arène et causer des blessures aux yeux ou au visage.
• Lis les instructions avant d’assembler et de jouer, et garde-les pour référence ultérieure.
• Au moment de détacher les pièces de leur cadre, demande à un adulte d’ébarber ces dernières à l’aide de ciseaux ou de tout autre outil approprié.
• Le cadre comporte des numéros qu’il faut respecter afin d’assembler les bonnes pièces.
• Jette immédiatement les sacs en plastique.
CONSTRUIS:
1
Attach the stickers as shown in the diagram.
Bit Chip
Attack Ring
PIÈCES:
Runner Frame
Parts, Attack Ring,
Solid Metal Core,
Weight Disk,
Blade Base and
Sticker Sheets
Les arènes BEYSTADIUM sont vendues séparément.
2
Snap both halves of Right Spin Gear
é around Solid Metal Core. Make sure Solid Metal Core and é are in grooves.
®*
®*
EDAD 8+
82656/82653 Asst.
Metal Driger
™
TROMPOS DE ALTO NIVEL
Incluye un trompo BEYBLADE desarmado, un propulsor y una varilla dentada.
Requiere armado, sin herramientas.
CUIDADO: No uses los trompos o los estadios BEYBLADE sobre una mesa o sobre cualquier otra superficie elevada.
Los trompos y los estadios BEYBLADE deben usarse en el suelo. No te inclines sobre el estadio mientras los trompos están girando, ya que pueden rebotar y causar lesiones a los ojos y la cara.
• Lee las instrucciones antes de armar y de jugar, y guárdalas para referencia futura.
• Al retirar las piezas de su marco, pídele a un adulto que les recorte el exceso de plástico con tijeras o cualquier otra herramienta apropiada.
• En el marco están inscritos unos números. Fíjate bien en ellos para armar las piezas correctamente.
• Deshazte inmediatamente de las
bolsas plásticas.
PIEZAS:
Runner Frame
Parts, Attack
Ring, Solid
Metal Core,
Weight Disk,
Blade Base and
Sticker Sheets
Los estadios BEYSTADIUM se venden por separado.
CONSTRUYE:
1
Attach the stickers as shown in the diagram.
Bit Chip
Attack Ring
2
Snap both halves of Right Spin Gear
é around Solid Metal Core. Make sure Solid Metal Core and é are in grooves.
3
Solid Metal
Core
Push up the tabs on the outside of
Lock Parts (2 places) and pull out.
Blade Base
4 Attach the Engine Gear to the Blade Base.
Engine Gear
5
Solid Metal
Core
Push in and press down Lock
Parts (2 places) to secure the
Right Spin Engine Gear.
3
Solid Metal
Core
Push up the tabs on the outside of
Lock Parts (2 places) and pull out.
Blade Base
4 Attach the Engine Gear to the Blade Base.
Engine Gear
5
Solid Metal
Core
Push in and press down Lock
Parts (2 places) to secure the
Right Spin Engine Gear.
3
Solid Metal
Core
Push up the tabs on the outside of
Lock Parts (2 places) and pull out.
Blade Base
4 Attach the Engine Gear to the Blade Base.
Engine Gear
5
Solid Metal
Core
Push in and press down Lock
Parts (2 places) to secure the
Right Spin Engine Gear.
6
Weight Disk
* Opening the Lock Parts (2 places) will enable you to attach Right Engine Gear.
Place Weight Disk on Blade Base.
8
Blade Base
Place Attack Ring on Blade Base, aligning tabs on ring with grooves on Right Spin
Engine Gear. Turn ring LEFT until it locks onto spin gear. To remove ring from gear, turn ring right.
Completed
Blade Base
*Once the Lock Parts (2 places) are in place,
Right Engine Gear will not come out.
9
Your BEYBLADE top is now ready for battle!
7 Attach Bit Chip to
Attack Ring.
Bit Chip
Attack Ring
6
Weight Disk
* Opening the Lock Parts (2 places) will enable you to attach Right Engine Gear.
Place Weight Disk on Blade Base.
8
Blade Base
Place Attack Ring on Blade Base, aligning tabs on ring with grooves on Right Spin
Engine Gear. Turn ring LEFT until it locks onto spin gear. To remove ring from gear, turn ring right.
*Once the Lock Parts (2 places) are in place,
Right Engine Gear will not come out.
9
Ta toupie est maintenant parée au combat!
Completed
Blade Base
7 Attach Bit Chip to
Attack Ring.
Bit Chip
Attack Ring
6
Weight Disk
* Opening the Lock Parts (2 places) will enable you to attach Right Engine Gear.
Place Weight Disk on Blade Base.
8
Blade Base
Place Attack Ring on Blade Base, aligning tabs on ring with grooves on Right Spin
Engine Gear. Turn ring LEFT until it locks onto spin gear. To remove ring from gear, turn ring right.
*Once the Lock Parts (2 places) are in place,
Right Engine Gear will not come out.
9
¡Ahora tu trompo
BEYBLADE está listo para combatir!
Completed
Blade Base
7 Attach Bit Chip to
Attack Ring.
Bit Chip
Attack Ring
A
LAUNCH:
Insert ripcord into launcher as shown.
B
Top View
Insert posts on launcher into openings in BEYBLADE top, as shown.
(NOTE: Use left-spin launchers for Left
Spin Gears; use right-spin launchers for Right Spin Gears.)
D
C Holding the launcher securely, pull the ripcord over the
BEYSTADIUM (not included)
– the BEYBLADE top will spin… launch… and battle!
Hold lower half of launcher and rotate
BEYBLADE top left to lock it in place.
FEATURES:
ENGINE GEAR Type 1
Instant release: This type releases its spin energy upon launch. The spin comes in a powerful burst of speed.
Solid Metal Core: The Solid
Metal Core is made entirely of metal and can be installed in any Engine Gear core! Try the new metal core on your
Engine Gear BEYBLADE and customize for greater weight!
Greater acceleration with your Engine Gear: Engine Gear tops are equipped with an Engine Gear for a short-term power blast. When the engine kicks in, even a semi-flat tip will be transformed into a tip boasting super mobility.
What is Engine Gear? It is a new battle part invented to improve the battle potential of your BEYBLADE.
The rotational forces of the BEYBLADE and the engine combine to improve your BEYBLADE with super acceleration performance!
CUSTOMIZE FOR EACH BATTLE!
Customizing is taking parts from different BEYBLADE tops and putting them together to create a new top. Why customize? Because you can change how your top will perform in battle. By switching parts, you can create a top that will perform a certain way. For example, if your opponent has an Attack Type top, you may want to change your top’s parts to make it a Defense Type top, to help withstand your opponent’s attacks.
Learn all the different types of Attack Rings, Weight Disks and Spin Gears that are available and that you have in your collection. Look at the star chart on the packages to see the strengths of each top’s parts and check out the website beyblade.hasbro.com for more information!
1
TRIPLE SHOT
You and your opponent each battle 3 BEYBLADE tops for triple the action!
2 3
PROPULSE:
A Introduis la tige cannelée dans le propulseur, comme indiqué.
B A
PROPULSA:
Inserta la varilla dentada en el propulsor tal como se indica.
B
Vue du dessus
Insère les tiges du propulseur dans les ouvertures de la toupie, comme indiqué.
D
C Tout en retenant fermement le propulseur, tire la tige cannelée au-dessus de l’arène (vendue séparément); la toupie sera lancée au combat en tournant!
Tout en retenant la partie inférieure du propulseur, fais tourner la toupie vers la gauche pour la bloquer en place.
FEATURES:
ENGINE GEAR Type 1
Instant release: This type releases its spin energy upon launch. The spin comes in a powerful burst of speed.
Solid Metal Core: The Solid
Metal Core is made entirely of metal and can be installed in any Engine Gear core! Try the new metal core on your
Engine Gear BEYBLADE and customize for greater weight!
Greater acceleration with your Engine Gear: Engine Gear tops are equipped with an Engine Gear for a short-term power blast. When the engine kicks in, even a semi-flat tip will be transformed into a tip boasting super mobility.
What is Engine Gear? It is a new battle part invented to improve the battle potential of your BEYBLADE.
The rotational forces of the BEYBLADE and the engine combine to improve your BEYBLADE with super acceleration performance!
UNE TOUPIE ADAPTÉE À CHAQUE COMBAT
1
Tu peux adapter ta toupie à tes besoins en échangeant ses pièces contre celles d’autres toupies
BEYBLADE pour ainsi obtenir une nouvelle toupie. Ce faisant, tu modifies la performance de ta toupie pour qu’elle réponde aux besoins du moment. Ainsi, par exemple, si ton adversaire joue avec une toupie de type attaque, tu auras peut-être intérêt à changer les pièces de ta toupie pour en créer une de type défense qui puisse résister aux attaques adverses. Familiarise-toi avec les divers types d’anneaux d’attaque, de disques lestés et d’engrenages de rotation qui sont disponibles ou que tu possèdes déjà dans ta collection. Examine aussi les tableaux étoilés qui apparaissent sur les emballages, qui t’indiquent les forces des pièces de chacune des toupies. Enfin, rends-toi au site beyblade.hasbro.com pour encore plus d’information.
TRIPLE RONDE
Ton adversaire et toi vous affrontez avec chacun 3 toupies BEYBLADE, pour trois fois plus d’action!
2 3
Vista de arriba
Inserta los salientes del propulsor en las ranuras del trompo, tal como se indica.
D
C Sosteniendo el propulsor firmemente, jala la varilla dentada encima del estadio (vendido por separado), para que el trompo empiece a girar en el momento en que sale del propulsor.
Sosteniendo la parte inferior del propulsor, gira el trompo hacia la izquierda para que se trabe en su lugar.
FEATURES:
ENGINE GEAR Type 1
Instant release: This type releases its spin energy upon launch. The spin comes in a powerful burst of speed.
Solid Metal Core: The Solid
Metal Core is made entirely of metal and can be installed in any Engine Gear core! Try the new metal core on your
Engine Gear BEYBLADE and customize for greater weight!
Greater acceleration with your Engine Gear: Engine Gear tops are equipped with an Engine Gear for a short-term power blast. When the engine kicks in, even a semi-flat tip will be transformed into a tip boasting super mobility.
What is Engine Gear? It is a new battle part invented to improve the battle potential of your BEYBLADE.
The rotational forces of the BEYBLADE and the engine combine to improve your BEYBLADE with super acceleration performance!
UN TROMPO ADAPTADO A CADA COMBATE
1
Puedes personalizar tu trompo tomando piezas de otros trompos BEYBLADE y unirlas para obtener un nuevo trompo. ¿Por qué modificarlo? Para ajustar el rendimiento de tu trompo a las necesidades del momento. Intercambiando sus piezas puedes crear un trompo más eficaz para cierto tipo de combate.
Así por ejemplo si tu oponente juega con un trompo de tipo ataque, te conviene cambiar las piezas de tu trompo para convertirlo en tipo defensa a fin de contrarrestar los ataques adversos. Conozca los diferentes tipos de anillos de ataque, discos-pesas o engranajes de rotación existentes o que ya tienes en tu colección. Mira también las tablas con estrellas en los empaques que te indican las fuer zas de las piezas de cada trompo. Por fin, visita nuestro sitio beyblade.hasbro.com para más información.
TRES RONDAS ¡Tú y tu adversario se enfrentarán con 3 trompos Beyblade para triple diversión!
2 3
Get your 3 BEYBLADE tops ready.
4
Play three rounds.
Decide the play order of your BEYBLADE tops.
5
To start the game, players launch their first BEYBLADE top.
Prépare tes 3 toupies Beyblade.
4
Jouez les trois rondes.
Décide dans quel ordre tu les lanceras.
5
Les joueurs commencent la partie en lançant leur première toupie Beyblade.
Alista tus 3 trompos Beyblade.
4
Jueguen las tres rondas.
Determina en qué orden los lanzarás.
5
Los jugadores empiezan la partida lanzando su primer trompo Beyblade.
*
The player who wins two out of three rounds is the winner!
Le joueur qui remporte deux des trois rondes est le vainqueur!
¡El jugador que gana dos de las tres rondas gana la partida!
Product and colors may vary. / Le produit et les couleurs peuvent varier. / El producto y los colores pueden variar.
®* and/or TM* & © 2003 Hasbro. All Rights Reserved. ® denotes Reg. U.S. Pat. & TM Office.
© Aoki Takao•BB2Project•TV Tokyo Licensed by d-rights Inc.
TM & © ABC Family Worldwide, Inc. All Rights Reserved.
Please keep company details for future reference.
Conserver notre adresse pour référence ultérieure.
Recomendamos conservar esta información.
Hasbro Canada, 2350 de la Province, Longueuil, QC, Canada J4G 1G2.
Imp.: Servicios Mexicanos de Manufactura S. de R.L. de C.V. km 17,5 Carr. Tlalnepantla-Cuautitlán, Loma Bonita,Cuautitlán Izcalli, Edo. de Méx. C.P. 54756 R.F.C.: SMM-
990712-156. Centro de Servicio para México: Tel.: 5872-9483 y para el interior de la República 01-800-712-6225. Distributed in the United Kingdom by Hasbro UK Ltd.,
Caswell Way, Newport, Gwent NP9 0YH. Distributed in Australia by Hasbro Australia Ltd., 570 Blaxland Road, Eastwood, NSW 2122, Australia. Tel.: (02) 9874-0999. Distributed in New Zealand by Hasbro New Zealand Ltd., Albany Highways, Auckland, PO Box 100 940. North Shore Mail Centre, Auckland, New Zealand 1333. Tel.: (649) 415-9916.
PRECAUCIÓN: No apuntar a los ojos o a la cara ni disparar a quemarropa.
advertisement
Related manuals
advertisement