Professional Disc Jockey Products

DM3000X/DM3002X

DJ MIXERS

©2001

Owner’s Manual

Industries http://www.numark.com

DM3000X/DM3002X

Safety Information

SAFETY INSTRUCTIONS

a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used.

b) Retain Instructions - The safety and operating instructions should be kept for future reference.

c) Heed Warnings - All warnings on this product and in these operating instructions should be followed.

d) Follow Instructions - All operating and other instructions should be followed.

e) Water and Moisture -

This product should be kept away from direct contact with liquids.

f) Heat - Avoid placing this product to close to any high heat sources such as radiators.

g) Ventilation - The appliance should be situated so that it’s location or position does not interfere with it’s proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation opening; or, placed in a built-installation, such as bookcase or cabinet that may impede the flow of air through the ventilation openings.

©2001 Industries

- The Leader in DJ Technology

- 2 h) Power Sources - This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit.

i) Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord.

j) Object and Liquid Entry - Take care that objects do not fall into and that liquids are not spilled into the inside of the mixer.

k) Cleaning – The appliance should be cleaned only as recommended by the manufacturer.

l)

Non-use Periods – The power cord of the appliance should be unplugged from the outlet when left unused for long periods of time.

m) Damage Requiring Service - Only qualified personnel should service this product.

If you have any questions about service please contact Numark at the number(s) shown on the back cover of this manual.

n) Grounding or Polarization - Precautions should be taken so that the grounding or polarization means built into the

CD player is not defeated.

o) Internal/External Voltage Selectors - Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself.

WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. Electrical equipment should NEVER be kept or stored in damp environments.

http://www.numark.com

DM3000X/DM3002X

VERY IMPORTANT

Please read this entire manual before connecting this unit to your system

For optimum performance:

•

•

•

The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item.

•

Never use spray cleaners on the slide controls. Residues cause excessive dirt build-up and this will void your warranty. In normal use slide controls can last for many years. If they malfunction (usually because of a dirty or dusty environment) consult a professional technician.

Always make sure that AC power is OFF while making any connections.

Use appropriate cables throughout your system. Do not use excessively long cables (i.e. over 50ft/14m) Be sure plugs and jacks are tightly mated. Loose connections can cause hum, noise or intermittents that could easily damage your speakers. Make the input and output connections with readily available low-capacitance stereo cables. Quality cable makes a big difference in audio fidelity and punch. See your Numark dealer or an electronics or audio specialist store if you are not sure which cables to get.

•

Never attempt to make any adjustments or repairs other than those described in this manual. Take the unit to your dealer or to an authorized Numark Service Center.

•

ALWAYS remember: “TURN AMPS ON LAST AND OFF FIRST”. Begin with master faders or volume controls on minimum and the amplifier gain/input control(s) down. Wait 8 to 10 seconds before turning up the volume. This prevents transients which may cause severe speaker damage.

•

Use restraint when operating controls. Try to move them slowly. Rapid adjustments could damage speakers due to amplifier clipping.

•

Avoid amplifier “clipping” at all costs: this occurs when the red LEDs (usually on the front panel of most professional power amplifiers) start flashing. “Clipping” is when the power amplifier is distorting and working beyond it’s limits. Amplifier distortion is THE major cause of speaker failure.

•

To prevent fire or shock hazard, do not expose the unit to rain or moisture. Never place cans of beer, soda, glasses of water or anything wet on top of the unit!

Product Registration

Please record the serial number of your unit as shown on the back of the chassis as well as the name of the dealer from whom you purchased the unit. Retain this information and your original purchase receipt for your records. Please return the enclosed warranty card to register your unit with us.

MODEL: __________________________

SERIAL NUMBER:__________________

PURCHASED FROM:_________________________

DATE OF PURCHASE:________________________

©2001 Industries

- The Leader in DJ Technology

- 3 http://www.numark.com

DM3000X/DM3002X

DM3000X/DM3002X

PROFESSIONAL DJ MIXERS

CONGRATULATIONS!

You have purchased the DM3000X/DM3002X Stereo Mixer by . This mixer was developed by DJs for you combining requested features in an easy to understand layout. Using the latest in circuit design technology and our history of award winning development experience you can expect years of reliable service from this product.

Careful attention to detail was provided in this unit. The DM3000X/DM3002X even has smooth edges to ensure your fingers don’t get caught up in the mix. We hope you enjoy the experience.

Thank you for purchasing NUMARK products!

FEATURES:

CROSSFADER

§ Crossfader Reverse (Hamster) Toggle with off position

§ Variable Slope Control

§ Channel Assign selectors

§ Fader Start (DM3002X only)

§ Transform Buttons w/action assignment (DM3002X only)

§ Treble Middle and Bass KILL toggle (DM3002X only)

MONITORING

§ Two Bar 12-Segment Display graph for Stereo Master output

§ Split/Blend Cue selection

§ Push Button Cueing

§ Headphone Jacks for Both 1/4" and 1/8" Headphone

Plugs

INPUTS

§ 3-line, 3-phono, 1-mic input

§ Front Panel 1/4" Mic input with Bass, and Treble controls

§ Rotary Bass, Middle & Treble -32dB "CUT" and +10dB

"Boost"

§ PFL cue monitoring with send out for sampling

§ PFL Gain Adjust

§ Individual PFL meters (DM3002X only)

§ Process insert looping on all channels including microphone (DM3002X only)

OUTPUTS

§ Monitor/Zone Level Control

§ Record output

§ PFL sampling output

§ Process Loop IN/OUT (DM3002XX only)

§ Fader Start (DM3002X only)

- The Leader in DJ Technology

- 4 ©2001 Industries http://www.numark.com

DM3000X/DM3002X

Safety Measures

Important Information

TABLE OF CONTENTS

Registration

Introduction

Description of the Features

Quick Setup Diagram

Block Diagram

Specifications

Warranty

10

11

12

6

9

2

3

3

4

©2001 Industries

- The Leader in DJ Technology

- 5 http://www.numark.com

DM3000X/DM3002X

8

7

5

28

3

26

5

6

4

2

1

10

27

15

16

11

12

13

21

17

24

22

©2001 Industries

9

20

18

19

25

23

14

- The Leader in DJ Technology

- 6 http://www.numark.com

DM3000X/DM3002X

MIXER FEATURES

INPUTS

1. Input faders - control individual source levels in the mix.

2. Input Toggle Switch (Transform) - selects which source will be live to that channel based on what you have connected to the rear panel input section. By removing the face panel the switch can be rotated into any of eight positions.

3. Pre-fader Gain Control – adjusts the pre-fader volume for cleaner sound. Use this in conjunction with the PFL Meter to adjust the audio to an optimum level.

4. Channel EQ – adjusts the Treble, Middle, and Bass frequencies respectively of the channel audio. Full rotation to the left creates a

“CUT” effect eliminating most of the sound from that frequency area.

5. Process Loop (DM3002X only) – activates the external process loop to the channel selected.

Note: All process loops go to the same output and return. By pressing process on two channels at the same time, the audio will bleed through to the each channel. Only use one process loop at a time!

6. PFL Meter (DM3002X only) - used to adjust the PFL levels, accurately match channel levels with the Pre-fader gain controls before mixing them together. The idea is to properly match PFL inputs, not the input with the stereo output meter!

MICROPHONE

7. Mic Gain Controls – controls the DJ Mic volume for the Neutrik™

“Combo” connector on the front panel.

8. Treble and Bass Controls – for fine-tuning the tone of your voice on both mics through the sound system. The controls are detented for setting tone "flat". For best results, use a dynamic cardioid microphone.

9. ¼” input connector - allows connection of a 1/4” microphone jack directly into the mixer.

HEADPHONE CUEING

10. Channel Cue Assign - are used to route Pre Fader Level (PFL) channel audio to the Monitor Section. The channel faders do not control the

Cue volume.

11. Headphone Mix - controls the mix of PFL and PGM signals to your headphones. When the slider is moved to the left, all you will hear is the cue source. When the slider is all the way to the right, you will hear what is playing through the master output. By blending, beats can be matched exactly and segues can be smooth when a song is cued.

12. Headphone Level – adjusts cue volume.

13. Split/Blend Cue – controls how PFL and Program audio are sent to your headphones. In split mode, the PFL audio can be heard in your left ear and PGM audio can be heard in your right ear. In blend mode, both PFL and PGM can be heard in both ears.

14. Headphone output – for your 1/4” or 1/8” headphones.

OUTPUTS

15. Master Fader – controls the overall output level.

16. Panning - controls output to the left and right speakers. By rotating left only the left speaker will be heard. By rotating right only the right speaker will be heard.

CROSSFADER

17. Crossfader - achieves clean segues between the two input channels selected by the Crossfader Assign.

18. Crossfader Slope – determines how quickly the audio from the opposing side of the crossfader activates. A tight curve (right position) turns on the opposing audio signal with very little crossfader movement.

A loose curve (left position) makes very long and smooth segues in transition.

19. Hamster switch with Off position – reverses the direction of the crossfader. In the center position the crossfader is deactivated.

20. Crossfader Assign – channels 1 or 2 can be assigned to the left.

Channels 2 and 3 can be assigned to the right. If for example channels 1 and 3 were selected then "Hard left" selects Channel 1 and "Hard right" selects Channel 3. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other.

Note: If channel 2 is selected on both sides, the crossfader will turn off channel 2 in the left position and turn it on in the right position

Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws that hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you’re back in business!

21. Beat Lights – Indicate when strong bass beats are present to allow more accurate beat mixes.

22. Push Button transforms (DM3002X only)– By pressing these button the crossfader channel will respond as determined by the transform assign

23. Transform Assign (DM3002X only):

(IN) - When active the transform button will punch in the channel assigned regardless of crossfader position. When punching in the opposing channel will be eliminated.

(OUT) – When active transform button will eliminate audio assigned

24. KILL switches (DM3002X only)- By moving these toggle down or up the marked frequency area will be removed. For instance is BASS is pressed the bass beat will be removed, Highs might remove cymbals, and middle might remove vocals.

25. Fader Start (DM3002X only)– activates the crossfader to send play and cue commands to your auto-start Numark CD player or other popular brand. For fader start, attach your mixer to a remote start CD player using industry standard 1/8”(3.5mm) cables. When you move the crossfader toward the active channel, the attached CD player will start.

When it is moved away, that side will cue (similar to pressing the cue button).

OTHER ITEMS

26. Stereo Auto Peak Hold Level Indicator- quickly and accurately tracks level of audio output. The red LEDs show output overload. When using

as a master output meter, set the crossover, equalizer and power amp inputs to avoid distortion at each step in the audio chain.

27. Power Switch – Actives mixer power. Always turn on input devices first, the mixer second, and amplifiers last!

28. Light Connector – for attaching a 12V BNC style gooseneck light.

©2001 Industries

- The Leader in DJ Technology

- 7 http://www.numark.com

DM3000X/DM3002X

REAR PANEL FEATURES

2

10 7

6

5

5

4

3

3

1

9

8

1.

Power Input - to plug your power plug in before switching on power. See safety precautions on page 3 for proper treatment of power.

2.

Voltage Selector – Set this to the appropriate power for your location. If unsure ask your authorized dealer.

3.

Phono Inputs – plug your turntables in here.

4.

Ground lug - use these connections with your turntables’ grounding cable to avoid signal hum.

5.

Line Inputs - to connect stereo audio from HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, CD players, laser discs, tuners, even synthesizers or other mixing consoles.

NOTE: Plug mono audio sources into both Left and Right inputs using a “Y" cable connector.

6.

Channel Process (DM3002X only) – The output is determined by pushing the front panel process selectors next to each channel. The post fader signal is sent to the send output. The send should then be plugged into your external processor. Plug you processor return into the

Return input. Set the output level of you processor to match the signal it receives from the send to ensure smooth activation. With proper level adjustment you can create smooth transitions between processed and unprocessed signal.

Note: this mixer was design to use one processor for many channels,

If more than one channel is selected than the signal will bleed across the channels. This can be a desired effect if you wish to blend wet a dry signal. Sent signal is captured after the PFL gain and prior to EQ and Pan adjustments allowing the user total control of the processed signal.

7.

Channel PFL Send – this output contains the PFL signal you hear in your headphones. The send should be plugged into your sampler and the signal returned through one of your inputs.

8.

Record Outputs – Plug in your tape deck to record your mix. Audio level is determined by the channel inputs.

9.

Unbalanced Main Outputs – program output controlled by the Master fader knob.

10. Fader Start Connector (DM3002X only) – to attach your mixer to a remote start equipped Numark CD player using industry standard

1/8”(3.5mm) cables. The fader start is design to work with all digital pulse style industry standard CD players

©2001 Industries

- The Leader in DJ Technology

- 8 http://www.numark.com

DM3000X/DM3002X

QUICK SETUP DIAGRAM

Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC power. Now you are ready to switch everything on. IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then your mixer, and then input devices.

©2001 Industries

- The Leader in DJ Technology

- 9 http://www.numark.com

DM3000X/DM3002X

BLOCK DIAGRAM

©2001 Industries

- The Leader in DJ Technology

- 10 http://www.numark.com

SPECIFICATIONS

©2001

Inputs:

Line: 10K ohm input impedance

83mV rms sensitivity for 1.22V output

Mic: 600 ohm input impedance unbalanced

1mV rms sensitivity for 1.22V output

65mV rms max input

Phono: 47Kohm input impedance

1.3mV rms sensitivity @ 1KHz for 1.22V output

Outputs:

Line:

Headphone:

9V rms max

0.5W into 47ohm

Distortion: less than 0.01%

Signal to Noise Ratio: (maximum output) JIS-A weighted

Line: Better than 92dB

Mic:

Phono:

Better than 82dB

Better than 85dB

Frequency response:

Line: 20Hz-20KHz +/-0.5dB

Mic:

Phono:

20Hz-15KHz +/-0.5dB

+/-1dB except for controlled attenuation of -3dB

@ 20Hz to reduce rumble and feedback

Channel equalizer:

Bass: +12/-32dB @40Hz

Middle:

Treble:

+12/-32dB @1.35KHz

+10/-28dB @15KHz

Channel Kill (DM3002X only):

Bass:

Middle:

Treble:

Better than 80dB at 40Hz

Better than 80dB at 1KHz

Better than 80dB at 15KHz

Power consumption:

16.7 Watt typical

21.2 Watt with full headphone output

Dimensions: 254mm(W)x 355mm(D)x 90mm(H)

Weight: 3.5 kgs

Industries

- The Leader in DJ Technology

- 11 -

DM3000X/DM3002X

http://www.numark.com

Professional Disc Jockey Products

LIMITED PRODUCT WARRANTY

What is covered and for how long?

1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK products; including but not limited to DJ mixers, amplifiers, CD players, CD Mix

Stations, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, cartridges, and all other accessories; are to be free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer for a period of (1) Year.

What is not covered? This Limited Warranty is conditioned upon proper use of the product by the purchaser.

2. This Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment, or service of the mixers; (e) crossfaders.

3. What are NUMARK'S obligations? During the applicable warranty period, NUMARK will repair or replace, at NUMARK'S sole discretion, without charge to the purchaser, any defective component part of the mixer. To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return authorization number ("RA#").

Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address. To obtain an RA# and assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000. Upon receipt, NUMARK will repair or replace the defective products. NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned or new product. Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer.

4. What are the limits on NUMARK'S liabilities? THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING

NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE

DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR

OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK MIXER, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT

LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST

PURCHASER BY ANY OTHER PARTY. THIS LIMITED WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S MIXERS, AND IS GIVEN IN LIEU OF ALL OTHER

EXPRESS WARRANTIES. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES

PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL

ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER

ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.

5. This Limited Warranty allocates risk of product failure between purchaser and NUMARK, and NUMARK'S product pricing reflects this allocation of risk and the limitations of liability contained in this Limited Warranty. The agents, employees, distributors, and dealers of NUMARK are not authorized to make modifications to this Limited Warranty, or make additional warranties binding on NUMARK. Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not constitute warranties by

NUMARK and should not be relied upon.

6. How does state law apply to this warranty? SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR

HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER.

7.

This Limited Warranty gives you specific legal rights. You may also have other rights, which vary from one jurisdiction to another.

RETURN INFORMATION

a) A Return Authorization number must be obtained from Numark through the address or phone numbers below.

b) A copy of the original sales receipt must also be included for the equipment to be repaired under warranty.

c) The faulty equipment must be packed in its original packaging.

d) One additional outer layer of packaging must be included to ensure product safety. Failure to do so may inadequately protect the equipment in transit and, therefore, jeopardize the customer’s warranty.

e) Numark will not accept COD shipments and no call tags will be issued for merchandise return.

f) Numark will not return repaired merchandise to customers by priority service, unless by written request at the customer’s cost. Requests must be submitted in writing with merchandise returned.

g) The defective Numark equipment should be sent, FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and original sales receipt enclosed to:

INDUSTRIES

Attention: Service Department

11 Helmsman Avenue

North Kingstown, RI 02852 USA

Phone: +1 (401) 295-9000

Fax:: +1 (401) 295-5200

Web: www.numark.com