Creative Platinum Sound Blaster Audigy 2 User Manual
Below you will find brief information for Sound Blaster Audigy 2 Platinum. The Sound Blaster Audigy 2 Platinum is a high-definition sound card that delivers high-definition sound, audio and 6.1 Dolby Digital Surround EX.
Advertisement
Advertisement
How to use this manual
Creative Sound Blaster Audigy 2 Platinum
Information in this document is subject to change without notice and does not represent a commitment on the part of Creative
Technology Ltd. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of the license agreement. It is against the law to copy the software on any other medium except as specifically allowed in the license agreement. The licensee may make one copy of the software for backup purposes only.
The Software License Agreement is found in a separate folder on this installation CD. The copyright and disclaimer, including trademark issues are also found in the same folder.
Important:
This User Manual (On CD) has been designed to provide you with complete product knowledge.
The following are instructions on how to make use of this manual effectively by launching applications and help files, as well as accessing relevant web sites, where applicable, via specially prepared links.
• To launch applications, Help files or to access relevant web sites, click the blue text , or whenever the symbol or appears on the object or text.
• For best viewing, this PDF is by default set to "Fit Width" so that all the contents on every page is visible. If you are unable to read the text clearly, press Ctrl + <+> to zoom in or Ctrl + <-> to zoom out. To view full screen, press Ctrl + <L>.
Note:
To access the applications and Help files, you must first install the manual and the applications in your computer.
Otherwise, you will receive error messages. When you click a link to launch a program, a dialog box may appear to inform you that Adobe Acrobat is going to launch the application. Click the
All
button to run subsequent applications without the message appearing again. To access linked web sites, your computer must be connected to the Internet.
Contents
Contents
High Definition Digital Audio Entertainment.............................ix
What is EAX ADVANCED HD? ................................................ x
Package Contents ................................................................xi
System Requirements..................................................... xii
Sound Blaster Audigy 2 card ........................................ xii
SB1394/FireWire applications, games or DVD viewing..... xii
Internet Multimedia and Entertainment ........................ xiii
Getting More Information.................................................... xiii
More Help ......................................................................... xiii
Technical Support .............................................................. xiii
Document Conventions....................................................... xiii
What You Need ......................................................................... 1-1
Your Sound Blaster Audigy 2 Card............................................... 1-2
Your Joystick/MIDI Bracket ........................................................ 1-5
Your Audigy 2 Drive .................................................................. 1-6
Connecting Headphones .................................................... 1-8
Connecting Microphones .................................................... 1-9
Adjusting Headphones Volume and Microphone Gain................... 1-10
Using the Audigy 2 Drive control knobs ............................. 1-10
Using Creative Surround Mixer ......................................... 1-11
Using a Remote Control with Your Drive..................................... 1-11
Remote Control Functions ........................................................ 1-12
Installation Steps .................................................................... 1-14
Step 1: Prepare your computer ........................................ 1-14
Step 2: Connect the Audigy 2 Drive cables ........................ 1-16
Step 3: Install the Audigy 2 Drive..................................1-17
Step 4: Install the Sound Blaster Audigy 2 card...............1-18
iii
Step 5: Install the Joystick/MIDI bracket ........................... 1-19
Step 6: Connect cables to Sound Blaster Audigy 2 card....... 1-20
Step 7: Connect to power outlet ....................................... 1-22
Connecting Related Peripherals................................................. 1-23
Connecting Speaker Systems ................................................... 1-26
Connecting External Consumer Devices ..................................... 1-27
Positioning Your Speakers ........................................................ 1-29
Installing Drivers and Applications............................................... 2-1
Sound Blaster Audigy 2 Feature Showcase Demo.......................... 2-2
Uninstalling and Reinstalling the Applications and Device Drivers .... 2-2
Reinstalling all Audio Drivers and Applications ...................... 2-2
Uninstalling all Audio Drivers and Applications...................... 2-3
Installing/Uninstalling selected Audio Drivers or Applications.. 2-4
Updating Windows 2000 (Service Pack 2) .................................... 2-5
Updating Windows 98 SE ........................................................... 2-5
Installing Digital Video Update............................................ 2-5
Creative Sound Blaster Audigy 2 Applications ............................... 3-1
Demos..................................................................................... 3-2
Sound Blaster Audigy 2 Getting Started Demo ................. 3-2
Sound Blaster Audigy 2 Feature Showcase Demo.............. 3-2
SoundFont Showcase ........................................................ 3-3
Introduction to the Sound Blaster Audigy 2 software suite ............. 3-3
Creative MediaSource Go! ............................................. 3-3
Creative MediaSource Go! Launcher.................................... 3-4
Creative MediaSource Player.......................................... 3-4
“What-You-Hear” multichannel recording..................... 3-5
Creative MediaSource Organizer..................................... 3-5
Finding and organizing songs ..................................... 3-5
iv
Keep your music database up to date ......................... 3-5
Transferring songs .................................................... 3-6
Automatically playing multimedia content.................... 3-6
Extracting and converting songs................................. 3-6
Storing music on recordable CD ................................. 3-6
Creative MediaSource DVD-Audio Player.............................. 3-7
Creative EAX Console ........................................................ 3-7
Audio Effects: Environmental Sound Processing ........... 3-7
CMSS 3D: Simulating Surround Sound........................ 3-8
Audio Clean-up: Removing noise and distortion............ 3-8
Time Scaling: Varying the speed of playback ............... 3-9
Creative Surround Mixer ............................................... 3-9
Creative Speaker Settings ............................................. 3-9
Creative Speaker Calibrator ..........................................3-10
Creative MiniDisc Center.................................................. 3-10
Creative SoundFont Bank Manager ................................... 3-10
Creative Audio Stream Recorder 2.................................3-11
Creative Wave Studio ..................................................3-11
Diagnostic and troubleshooting utilities...................................... 3-12
Creative Diagnostics ....................................................3-12
Creative Speaker Settings ............................................3-12
v
Appendixes
Features .................................................................................. A-1
PCI Bus Mastering .................................................... A-1
Audigy 2 Processor ................................................... A-1
High Quality Audio Path............................................. A-1
Professional Digital Audio Processing........................... A-2
Flexible Mixer Control................................................ A-2
THX Certification ...................................................... A-2
Dolby Digital (AC-3) Decoding.................................... A-3
Creative Multi Speaker Surround (CMSS) .................... A-3
SB1394/FireWire Compatibility................................... A-3
Connectivity ............................................................................. A-3
Sound Blaster Audigy 2 card .............................................. A-3
Audio Inputs ............................................................ A-3
Audio Outputs .......................................................... A-4
SB1394/FireWire Interfaces ....................................... A-4
Interfaces................................................................ A-4
Audigy 2 Drive............................................................. A-5
Audio/Video Inputs and Outputs On Front Panel ........... A-5
Interfaces................................................................ A-5
Problems Installing Software ...................................................... B-1
Problems with Sound................................................................. B-2
Problems with File Transfers on Some VIA Chipset Motherboards.... B-6
Insufficient SoundFont Cache ..................................................... B-7
Problems with Joystick............................................................... B-8
Problems with Multiple Audio Devices .......................................... B-9
Problems with Sound Blaster Live! Series or Sound Blaster
vi
PCI512 card.......................................................................... B-10
Resolving I/O Conflicts............................................................. B-11
Problems with Encore DVD Player ............................................. B-12
Problems with Software DVD Player .......................................... B-12
Problems with DV driver for Windows 98 SE/2000/Me/XP ............ B-13
Problems in Windows XP.......................................................... B-14
Problems with Digital Audio Devices .......................................... B-15
vii
Introduction
Introduction
High Definition
Digital Audio
Entertainment
MLP (Meridian Lossless
Packing), the method of audio data compression used in
DVD-Audio, reduces file size without removing any of the information that was contained in the original recording. The listening audience will hear the audio as it was intended in the original recording. Other packing methodologies that remove data as part of the compression are referred to as
'Lossy Compression'
Thank you for purchasing Sound Blaster Audigy 2 Platinum, the next generation
Creative audio product with exciting new features and enhanced audio processing architecture.
This User Manual (on CD) guides you through the installation and usage of Sound
Blaster Audigy 2 Platinum. Sound Blaster Audigy 2 Platinum consists of the Sound
Blaster Audigy 2 card, Joystick/MIDI bracket, the Audigy 2 Drive and an infrared (IR) remote control.
Featuring 24-bit/192 kHz audio playback, Sound Blaster Audigy 2 Platinum delivers high-definition sound of astounding quality and 24-bit/96 kHz audio recording capability from all Line Ins and SPDIF In. Sound Blaster Audigy 2 Platinum supports surround sound audio on your computer and has output capabilities for 6.1 Dolby
Digital Surround EX.
Sound Blaster Audigy 2 has received the prestigious THX and movie experiences.
®
Multimedia Certification award, making it the perfect choice for PC audiophiles seeking the very best music
The Sound Blaster Audigy 2 card, with its Audigy 2 processor, enables awesome
EAX
®
ADVANCED HD
NOMAD
® cameras.
TM
technologies for your gaming and music listening experience. The SB1394
TM
/FireWire
®
port provides easy high-speed connectivity to
portable digital audio players, external CD-RW drives, and other IEEE
1394 compatible devices like DV camcorders, printers, scanners, and digital still
Introduction ix
What is EAX
ADVANCED HD?
Combine Sound Blaster Audigy 2 Platinum with our rich software package for hours of endless fun. Included in your Sound Blaster Audigy 2 Installation and Applications
CD are the latest generation drivers and software for you to enjoy DVD-Audio entertainment with native MLP (Meridian Lossless Packing) support, and to create
EAX-enhanced MP3 songs, which you can share with your friends over the Internet.
EAX ADVANCED HD brings a new level of performance, power, and flexibility to PC audio. Taking advantage of the enhanced processing capabilities of the SoundBlaster
Audigy 2 processor, EAX ADVANCED HD delivers a host of new features that achieve high definition audio for gaming and music enhancement.
The all-new EAX ADVANCED HD Game Audio Library takes in-game audio and acoustic simulation to a whole new level. These innovative technologies bring tremendous realism and total audio immersion for PC gaming:
❑
New Multi-Environment
effects in real time.
TM
technology renders multiple environment audio
❑
Environment Panning
TM
makes it easy for gamers to track with threedimensional precision, the location and movement of sounds that usually represent enemies or team mates. This gives Sound Blaster Audigy 2 gamers a better advantage as they are more "attuned" to the game scenario.
❑
Environment Reflections
TM
❑
Environment Filtering
TM
offers localization of early reflections and echoes.
accurately simulates the propagation of sound in both open and closed environments.
❑
Environment Morphing
TM
allows for seamless transition from one environment to the next.
EAX ADVANCED HD Music Technologies also assures sonic superiority.
❑
Audio Clean-Up
removes unwanted noise in a digital audio file.
❑
Time Scaling
speeds up and slows down music with no distortion.
❑
EAX ADVANCED HD
music effects, developed especially for music listening, further enhance playback of songs.
Introduction x
Package Contents
The items listed here may be different in certain countries.
Use the AD_EXT cable with the Audigy 2 Drive ONLY. Do not attempt to use a conventional IDE cable or any other cable with the
Audigy 2 Drive as that may cause electrical shorts and permanent damage to the
Audigy 2 card and Audigy 2
Drive, which will void the warranty for this product.
Your computer may potentially be damaged too.
EAX ADVANCED HD offers dramatically increased 3D audio performance and functionality. Delivering superior audio fidelity and sophisticated reverb effects, this unsurpassed digital entertainment experience is available only from the Sound
Blaster Audigy 2 family of products.
The following items are included with the Sound Blaster Audigy 2 Platinum package:
❑
Sound Blaster Audigy 2 card
❑
Audigy 2 Drive and IR remote control
❑
Joystick/MIDI bracket
❑
Internal SB1394/FireWire cable
❑
AD_EXT cable
❑
Digital CD audio cable
❑
Power splitter cable
❑
2 Mini-DIN-to-standard-DIN adapters
❑
3.5 mm minijack to 1/4" plug adapter
❑
4 screws + shunt (for microphone selection)
❑
2 AAA batteries for the IR remote control
❑
Sound Blaster Audigy 2 Installation and Applications CD
❑
Quick Start Guide leaflet
❑
User manual (on CD)
❑
Sound Blaster Audigy 2 Feature Showcase Demo CD
❑
Creative DVD-Audio Sampler disc
❑
Warranty (printed or on CD)
❑
Technical Support (printed or on CD)
Introduction xi
System
Requirements
Sound Blaster Audigy 2 card
SB1394/FireWire applications, games or DVD viewing
Minimum 256 MB RAM recommended for Windows
2000 SP3 and Windows XP
SP1 users for games and DV capture and editing.
❑
Genuine Intel
®
Pentium
®
II 350 MHz, AMD
®
K6 450 MHz or faster processor
❑
Intel, AMD or 100%-Intel compatible motherboard chipset
❑
Windows
®
98 Second Edition (SE), Windows Millennium Edition (Me), Windows
2000 Service Pack 2 (SP2) or Windows XP
❑
64 MB RAM for Windows 98 SE and Windows Me
128 MB RAM for Windows 2000 SP2 and Windows XP
❑
600 MB of free hard disk space
❑
Available PCI 2.1 compliant slot for the Sound Blaster Audigy 2 card
❑
Available adjacent slot for the Joystick/MIDI bracket (optional)
❑
Available 5 1/4" PC drive bay
❑
Headphones or amplified speakers (available separately)
❑
CD-ROM drive installed
❑
Genuine Intel Pentium III 500 MHz or AMD 700 MHz processor for SB1394/
FireWire applications or games
❑
SB1394/FireWire: Minimum 128 MB RAM for digital video (DV) capture and editing recommended, Ultra DMA hard disk with 1 GB workspace (ATA-100, 7,200 rpm type and 6 GB recommended) for DV applications
❑
Games: At least 128 MB RAM, 3D graphics accelerator with at least 8 MB of texture RAM, available 300–500 MB of free hard disk space
❑
DVD: At least second generation DVD-ROM drive with these recommended soft-
DVD players: InterVideo’s WinDVD 2000 or CyberLink’s PowerDVD 3.0 or later
❑
DVD-Audio: Requires genuine Intel Pentium III or AMD Athlon
DVD-ROM drive 6X or higher
TM
1 GHz or faster,
256 MB for Windows 2000 SP3 and Windows XP SP1, and a second generation
Introduction xii
Internet Multimedia and
Entertainment
Getting More
Information
More Help
Technical Support
Document
Conventions
Internet Radio: Requires at least a 56 kbps modem and an active Internet connection to run the application.
Other applications may have higher system requirements or may require a microphone. Refer to the application’s online Help documentation for details.
Refer to the Sound Blaster Audigy 2 Getting Started Demo and the various online
Help files for detailed information on Creative applications. The Sound Blaster
Audigy 2 Feature Showcase Demo gives you an interactive introduction to Sound
Blaster Audigy 2 and demonstrates the card’s capabilities.
View the contents of the Sound Blaster Audigy 2 Installation and Applications CD for additional libraries and other software. Visit the www.soundblaster.com
site for the latest Sound Blaster news and products. The site also includes information on making purchases, technical help, and the latest driver updates.
Visit www.soundblaster.com/support/faq for general help.
The following typographical conventions are used throughout this manual:
The notepad icon indicates information that is of particular importance and should be considered before continuing.
The alarm clock designates a caution or warning that can help you avoid situations involving risk.
The warning sign indicates that failure to adhere to directions may result in bodily harm or life-threatening situations.
Introduction xiii
1
Installing Hardware
This chapter tells you how to install the Sound Blaster Audigy 2
Platinum hardware.
Installing Hardware
What You Need
Before you begin installation, be sure that you have these:
In addition, you will also need an available PCI slot and another adjacent available slot on your computer.
Sound Blaster Audigy 2 Drive
Use the AD_EXT cable with the Audigy 2 Drive ONLY. Do not attempt to use a conventional IDE cable or any other cable with the
Audigy 2 Drive as that may cause electrical shorts and permanent damage to the
Audigy 2 card and Audigy 2
Drive, which will void the warranty for this product.
Your computer may potentially be damaged too.
Sound Blaster Audigy 2 card
Joystick/MIDI bracket
Digital CD audio cable
Phillips-head screwdriver
(not included)
Remote
Control
AD_EXT cable
Internal SB1394/FireWire cable
Screws
Shunt
Installing Hardware 1-1
Your Sound
Blaster Audigy 2
Card
Your audio card has these jacks and connectors to enable the attachment of a wide variety of devices:
In Analog mode, the Line Out,
Rear Out and Rear Center Out jacks are used simultaneously for 6.1 channel speaker systems.
Click any circled number in the diagram for a description of the item.
Figure 1-1: Jacks, connectors and ports on the
Sound Blaster Audigy 2 card.
Installing Hardware 1-2
or on any description in the table to return to the main diagram.
Number
1
2
3
4
5
6
7
Table 1: Description of Jacks, Connectors and Ports.
Description
Connects to an IEEE 1394 compatible external device (such as a digital video camcorder, digital still camera, printer or scanner).
Connects to Center, Subwoofer and Rear Center Out of powered analog speakers or an external amplifier for audio output.
Connects to Rear Left/Right Out of powered analog speakers or an external amplifier for audio output.
Connects to Front Left/Right Out of powered analog speakers or an external amplifier for audio output. Also supports headphones.
Connects to an external microphone for voice input.
Connects to an external device
(such as a cassette, DAT or MiniDisc player).
6-channel or compressed AC-3 SPDIF output for connection to external digital devices or digital speaker systems.
Installing Hardware 1-3
or on any description in the table to return to the main diagram.
Number
8
9
10
11
12
13
14
Table 1: Description of Jacks, Connectors and Ports.
Description
Telephone Answering Device connector (TAD)
Provides a monaural connection from a standard voice modem, and transmits microphone signals to the modem.
Connects to the Analog Audio output on a CD-ROM or DVD-ROM drive using a CD audio cable.
Connects to internal audio sources such as TV Tuner, MPEG, or other similar cards.
Connects to the SB1394/FireWire connector on the Audigy 2
Drive.
Connects to the SPDIF (Digital Audio) output (where available) on a CD-ROM or DVD-ROM drive using the Digital CD audio cable provided.
Joystick/MIDI connector (JOYSTICK)
Connects to the Joystick/MIDI cable.
Audio Extension connector (AD_EXT)
Connects to the internal Audigy 2 Drive.
Installing Hardware 1-4
Your Joystick/
MIDI Bracket
The Joystick/MIDI bracket is used to attach a joystick or MIDI device:
Joystick/MIDI connector
Connects to a joystick or a MIDI device.
Rear view of connector bracket
Figure 1-2: Connector on the Joystick/MIDI bracket.
Installing Hardware 1-5
Your Audigy 2
Drive
Click any circled number in the diagram for a description of the item.
The Audigy 2 Drive provides additional connectivity for a number of other devices.
The front panel of your Audigy 2 Drive has these jacks, connectors and controls:
• If your headphones or microphone uses a 1/8"
(3.5 mm) plug, use a 1/8" stereo mini plug to 1/4" stereo phono plug adapter
(included).
• Set the gain of the Mic In 2 jack to the minimum before connecting or turning on a microphone, especially if you are monitoring the microphone input with headphones.
Figure 1-3: Jacks, connectors and controls on the Audigy 2 Drive.
Installing Hardware 1-6
or on any description in the table to return to the main diagram.
2
3
4
5
6
Table 2: Description of Jacks, Connectors and Controls.
Number
1
Description
Connects to a microphone or audio devices such as electric guitars and DAT or MiniDisc players.
Controls the headphones output volume. See “Adjusting
Headphones Volume and Microphone Gain” on page 1-10.
Connects to a pair of headphones using a 1/4" stereo plug or adapter. Your speaker output is muted when you connect the headphones to the Audigy 2 Drive.
Connects to digital audio devices such as DAT and MiniDisc recorders, via RCA input/output.
Optical SPDIF In/Out connectors
Connects to digital audio devices such as DAT and MiniDisc recorders, via optical input/output.
Connects to consumer equipment such as VCR, TV and CD players, via RCA Auxiliary audio outputs.
Installing Hardware 1-7
or on any description in the table to return to the main diagram.
Connecting
Headphones
8
9
10
11
Table 2: Description of Jacks, Connectors and Controls.
Number
7
Description
Receptor for the Infrared commands from your IR remote control.
Connects to MIDI devices using the mini DIN-to-Standard DIN adapters provided.
Connects to IEEE 1394 compatible devices.
(Microphone Gain Control)
To switch to Line In 2, turn the knob counter clockwise over the
Line In 2/Mic In 2 separator mark until you hear a “click”. To switch back to Mic In 2, turn the knob clockwise over the separator mark until you hear a “click”. To increase microphone
gain, continue to turn clockwise. See “Adjusting Headphones
Volume and Microphone Gain” on page 1-10.
Line In 2/Mic In 2 separator mark
There are two types of headphones that can be connected to your Audigy 2 Drive:
❑
Home or professional headphones fitted with a 1/4" stereo phono plugs
.
❑
Personal stereo headphones fitted with a 1/8" 3.5 mm stereo miniplug, such as those used with personal audio players, when used with the included 1/8" 3.5 mm minijack to 1/4" plug adapter.
Installing Hardware 1-8
Connecting
Microphones
• The Jumper JP1 may not be available on certain models of Audigy 2 Drive.
• The shunt for Jumper JP1 can be found together with the packet of screws provided.
There are two types of microphones that can be connected to your Audigy 2 Drive:
❑
Dynamic microphone, which is usually fitted with a ¼" stereo plug, such as those used in vocal performances.
❑
Condenser microphone, such as those sold for use with computers, are equipped with a 3.5 mm minijack.
Shunt
To use a dynamic microphone, place the shunt onto Jumper JP1.
To use a condenser microphone, remove the shunt from Jumper JP1
(default setting).
Jumper JP1
Figure 1-4: Microphone jumper settings.
By default, your Audigy 2 Drive is set for use with a condenser microphone. To use a dynamic microphone, you must place the shunt (jumper) on to Jumper JP1 on your
Audigy 2 Drive. See Figure 1-9 on page 1-16 for the location of Jumper JP1 on your
Audigy 2 Drive.
Installing Hardware 1-9
Adjusting
Headphones
Volume and
Microphone
Gain
Using the Audigy 2
Drive control knobs
You can adjust the headphones volume and microphone gain in two ways.
On the front panel of the Audigy 2 Drive, turn the respective control knob:
❑
Counterclockwise
to
decrease
the headphones volume or microphone gain.
❑
Clockwise
to
increase
the headphones volume or microphone gain.
Installing Hardware 1-10
Using Creative
Surround Mixer
To install Surround Mixer and other applications, see
• For best effects, set the headphones volume and microphone gain levels to
75% in Creative Surround
Mixer, and then use the
Audigy 2 Drive’s control knobs to make further adjustments.
• If you set the headphones volume or microphone gain levels to 0%, or mute them in Creative Surround Mixer, you hear no sound if the
Audigy 2 Drive’s control knobs are set to the maximum.
To adjust headphones volume:
1. Click
Start
->
Programs
->
Creative
->
Sound Blaster Audigy 2
->
Surround Mixer
.
2. On the
Master Control
panel of Creative Surround Mixer, make sure that there is no red “X” on the
Speaker
button under the
Volume
slider. Otherwise, click the
Speaker
button. This will unmute the headphones output.
3. Drag the
Volume
slider up or down to adjust the headphones volume.
To adjust microphone gain:
1. Click
Start
->
Programs
->
Creative
->
Sound Blaster Audigy 2
->
Surround Mixer
.
2. On the
Source
panel of Creative Surround Mixer, click an audio input source button with a down arrow, and then select
Microphone
.
3. Make sure the
Speaker
button below the
Microphone
slider has no red “X” on it. Otherwise, click the
Speaker
button. This will unmute the audio input.
4. Drag the slider to adjust the microphone gain.
Using a Remote
Control with
Your Drive
The Audigy 2 Drive has an infrared receiver for the remote control. This remote control lets you operate your computer from the comfort of your sofa or bed up to a distance of 4 meters (13 feet).
Installing Hardware 1-11
Remote Control
Functions
• OSD - On Screen Display.
• Depending on where you purchased your product, the actual remote control may vary from the one shown here.
Refer to Figure 1-5 and Figure 1-6 below for a description of your remote control’s
functions.
Number pad
Used for the selection of tracks and menu items. To access a two-digit number track such as track 10, press the "1" button followed by the "0" button (in quick succession). During playback of a media format, press the
"0" button to display the track list on the
OSD for selection.
Play/Pause button
Starts, pauses or resumes the current playback.
Up/Down buttons
Used for navigating up/ down.
Fast
Forward/
Right button
Used for fast forwarding a track, increasing a value or navigating right.
Reverse/Left button
Used for rewinding a track, decreasing a value or navigating left.
Select/OK button
Executes a selected task or command.
During playback of a media format, press this button to display the content menu on the OSD* for selection.
Stop/Eject button
Stops the current playback. Pressing the button subsequently will eject the disc.
Record button
Starts audio recording.
Next button
Goes to the next track or menu page.
Previous button
Goes to the previous track or menu page.
Slow Motion
Forward button
Reduces the playback speed
(except for audio
CDs and MIDI files). Press repeatedly to select the speed. Press the Play/Pause button to resume normal playback.
Step Forward button
(For video only)
Press once to pause the playback. Pressing the button subsequently will advance to the next video frame.
To resume normal playback, press the
Play/Pause button.
Figure 1-5: Navigation Buttons on the Remote Control.
Installing Hardware 1-12
EAX button
Displays the
EAXspecific
OSD menu.
Display button
Displays the current task status, and the time and date on the OSD.
Options button
Displays options for current task.
Power button
Displays the Shutdown menu.
Return button
Returns to parent menu.
Close/Cancel button
Cancels the current
OSD menu or closes the current application controlled by the remote control.
Start button
Displays the OSD
Start menu for the selection of a task.
CMSS button
Press to select CMSS mode.
Mute button
Press to mute audio.
Master Volume buttons
Press the Volume Up (+) or Volume
Down (-) button to control the master volume of your computer and Sound Blaster Audigy 2.
Figure 1-6: Other Buttons on the Remote Control.
Installing Hardware 1-13
Installation Steps
Step 1: Prepare your computer
1. Turn off your computer and all peripheral devices.
2. Touch a metal plate on your computer to ground yourself and to discharge any static electricity, and then unplug the power cord from the wall outlet.
3. Remove the computer cover.
4. Remove the metal brackets from two adjacent unused PCI slots as shown in
Figure 1-7. Put the screws aside for use later.
Turn off the main power supply and disconnect your computer’s power cord.
Systems using an ATX power supply unit with soft power off may still be powering the
PCI slot. This can damage your audio card when it is inserted into the slot.
A
Remove any existing audio card or disable the onboard audio chipset. For more
information, see “Problems with Multiple Audio Devices” on page B-9.
A:
metal bracket
B:
PCI slot
C:
ISA slot (may not be present on your computer)
Figure 1-7: Removing metal plates
B
C
Installing Hardware 1-14
5. To install the Audigy 2 Drive, remove the front panel cover from an unused 5¼"
drive bay, as shown in Figure 1-8.
5¼” drive bay cover
Figure 1-8: Removing 5¼” drive bay cover.
Installing Hardware 1-15
Step 2: Connect the
Audigy 2 Drive cables
Connect the cables to the Audigy 2 Drive as shown in Figure 1-9.
C
B
• Use the AD_EXT cable with the Audigy 2 Drive
ONLY. Do not attempt to use a conventional IDE cable or any other cable with the Audigy 2 Drive as that may cause electrical shorts and permanent damage to the Audigy 2 card and Audigy 2 Drive, which will void the warranty for this product.
Your computer may potentially be damaged too.
• To prevent permanent damage, use only: the
AD_EXT cable with the
AD_EXT connector, and the Audigy 2 card with the Audigy 2 drive.
• Do not force any cable into a connector. This can cause permanent damage to your hardware.
A
Audigy 2 Drive
G
E
F
D
A:
Internal SB1394/
FireWire cable
B:
Jumper for microphone type selection
C:
Power splitter cable
D:
To system power supply unit
E:
Red-colored wire
F:
AD_EXT cable
G:
Black circle on the underside of the cable
Figure 1-9: Connecting the Audigy 2 Drive cables.
Installing Hardware 1-16
Step 3: Install the
Audigy 2 Drive
1. Slide the Audigy 2 Drive fully into the vacant 5¼" drive bay as shown in Figure
2
1
Figure 1-10: Installing the Audigy 2 Drive.
2. Secure its sides to the casing with the screws provided.
Installing Hardware 1-17
Step 4: Install the
Sound Blaster
Audigy 2 card
1. Align the Sound Blaster Audigy 2 card with the PCI slot and press the card gently
but firmly into the slot as shown in Figure 1-11.
2
Do not force the audio card into the slot. Make sure that the gold finger PCI connector on the Sound Blaster Audigy
2 card is aligned with the PCI bus connector on the motherboard before you insert the card into the PCI expansion slot.
If it does not fit properly, gently remove it and try again
.
1
Figure 1-11:Securing the audio card to the expansion slot.
2. Secure the card with one of the screws you had placed aside earlier.
Installing Hardware 1-18
Step 5: Install the
Joystick/MIDI bracket
If you are installing a joystick or MIDI device (optional), secure the Joystick/MIDI bracket to the slot next to the Sound Blaster Audigy 2 card with the second screw.
You may also connect all the cables to the Sound Blaster
Audigy 2 card first (as shown
Sound Blaster Audigy 2 card” on page 1-20) before securing
the card and Joystick/MIDI bracket in place.
Joystick/MIDI bracket
Joystick/MIDI cable
Figure 1-12:Securing the Joystick/MIDI bracket.
Installing Hardware 1-19
Step 6: Connect cables to Sound
Blaster Audigy 2 card
1. Connect the Joystick/MIDI cable to the Joystick/MIDI connector on the Sound
Blaster Audigy 2 card as shown in Figure 1-13.
A
3
B
C
1
D
• Use the AD_EXT cable with the Audigy 2 Drive ONLY.
Do not attempt to use a conventional IDE cable or any other cable with the
Audigy 2 Drive as that may cause electrical shorts and permanent damage to the
Audigy 2 card and Audigy 2
Drive, which will void the warranty for this product.
Your computer may potentially be damaged too.
• Align the red-colored wire to Pin 1 of the connector
E
2
You may also connect all the cables to the Sound Blaster
Audigy 2 card first (as shown
Sound Blaster Audigy 2 card” on page 1-20) before securing
the card and Joystick/MIDI bracket in place.
A:
Internal SB1394/
FireWire cable
B:
Pin 1
C:
AD_EXT cable
D:
Red-colored wire
E:
Joystick/MIDI cable
Figure 1-13: Connecting the cables to the Sound Blaster Audigy 2 card.
2. Connect the AD_EXT cable from the Audigy 2 Drive to the AD_EXT connector on the Sound Blaster Audigy 2 card.
3. Connect the Internal SB1394/FireWire cable from the Audigy 2 Drive to the
Internal SB1394/FireWire port on the Sound Blaster Audigy 2 card.
Installing Hardware 1-20
• If the Sound Blaster
Audigy 2 card is connected to both the CD_SPDIF and
CD Audio connectors on a
CD-ROM or DVD-ROM drive, do not enable the
CD Audio and CD Digital options at the same time in Surround Mixer.
• Analog and Digital CD audio cables are not needed when CDDA is used.
• The CD_SPDIF connector is not used with software
DVD players.
For analog CD audio output: connect an Analog CD audio cable (available separately) from the Analog Audio connector on your CD-ROM/DVD-ROM drive to the CD_IN connector on the Sound
Blaster Audigy 2 card as shown in Figure 1-14.
A
B
OR
C
A:
CD-ROM/DVD-ROM drive
B:
Analog CD Audio cable (available separately)
C:
Digital CD Audio cable
Figure 1-14:Connecting analog/digital audio cables to CD-ROM/DVD-ROM drives.
For digital CD audio output: connect the Digital CD audio cable from the Digital Audio connector on your CD-
ROM/DVD-ROM drive to the CD_SPDIF connector on the Sound Blaster Audigy 2
Installing Hardware 1-21
Step 7: Connect to power outlet
1. Replace the computer cover.
2. Plug the power cord back into the wall outlet, and turn on the computer.
To connect your Sound Blaster Audigy 2 card to other devices, see “Connecting
Related Peripherals” on page 1-23.
To install drivers and software, refer to “Installing Drivers and Applications” on page 2-1.
Installing Hardware 1-22
Connecting
Related
Peripherals
Use the AD_EXT cable with the Audigy 2 Drive ONLY. Do not attempt to use a conventional IDE cable or any other cable with the
Audigy 2 Drive as that may cause electrical shorts and permanent damage to the
Audigy 2 card and Audigy 2
Drive, which will void the warranty for this product.
Your computer may potentially be damaged too.
Sound Blaster Audigy 2 will give you endless hours of listening pleasure. Figure 1-
15 shows you how to connect related peripherals to your Sound Blaster Audigy 2 to
optimize your enjoyment.
Line-out
Sound Blaster
Audigy 2 card
Click any circled number in the diagram for a description of the item.
Figure 1-15:Connecting other devices
Installing Hardware 1-23
or on any description in the table to return to the main diagram.
Number
1
2
3
4
5
6
7
Table 3: Description of Connectors and Devices.
Description
Connects to digital speakers, for example, Creative Inspire
TM
5.1
Digital Speakers and MiniDisc or DAT via minijack-to-DIN cable.
Connects to a cassette or CD player, synthesizer, etc.
Connects to a microphone.
Connects to analog front, rear and rear center inputs of 6-channel speakers, for example, 6.1 Creative Inspire or Cambridge
SoundWorks analog speaker systems.
Connects to all IEEE 1394 compatible devices such as NOMAD digital audio players, DV camcorders, digital cameras, and
WebCams.
Connects to a game pad or MIDI device like BlasterKey.
Connects to Audigy 2 Drive.
Installing Hardware 1-24
*Available separately.
or on any description in the table to return to the main diagram.
Number
8
9
Table 3: Description of Connectors and Devices.
Description
(left) and
Digital CD audio cable
(right)
Installing Hardware 1-25
Connecting
Speaker Systems
If you have a 5.1 channel speaker system, you can upmix your stereo sources (such as CD Audio, MP3, WMA, MIDI, and Wave) to 6.1 channels by using Creative Multi-
Speaker Surround (CMSS) technology. To upmix, you need to enable the CMSS feature in Creative EAX Console. Refer to the Creative EAX Console online Help.
4.1 or 5.1 Digital Speaker
System by Creative or
Cambridge SoundWorks
E
C
A
F
G
B
*For example, Creative
Inspire 6.1 Analog
Speakers.
D
Sound Blaster Audigy 2 card
A:
Analog Line and Rear Inputs
B:
Digital DIN
C:
Minijack-to-DIN cable
D:
6.1 speaker audio cable
E:
Digital Out jack
F:
Line Out (top)
Rear out (middle)
Rear Center Out (bottom)
G:
AD_EXT
Connects to Audigy 2 Drive
Analog 6.1 channel speaker system*
Figure 1-16:Connecting Sound Blaster Audigy 2 card to speaker systems.
Installing Hardware 1-26
Connecting
External
Consumer
Devices
Dolby Digital Decoder/
Amplifier
For discrete 7-channel amplifiers or systems, use a
3.5 mm (stereo) Audio/Videoto-RCA cable (not included) to connect Line Out 3 to available center, subwoofer and rear center channels.
Discrete 6-channel
Amplifier/Speaker
System
Click any circled number in the diagram for a description of the item.
Sound Blaster Audigy 2 card
OR
Additional information for advanced users:
For connection to Center and Subwoofer channels using a 3.5mm (stereo)-to-RCA cable or 3.5 mm (stereo)
Audio/Video-to-RCA cable, connect the white RCA jack to the Center input and the red RCA jack to the Subwoofer input.
Figure 1-17:Connecting external consumer devices to the Sound Blaster Audigy 2 card.
Installing Hardware 1-27
or on any description in the table to return to the main diagram.
8
9
10
Table 4: Description of Connectors and Consumer Devices.
Number
5
6
7
3
4
1
2
Description
3.5 mm (stereo) Audio/Video-to-RCA cable
Analog Front, Rear and Center/Subwoofer Inputs
(top)
(middle)
(bottom)
Connects to Audigy 2 Drive
3.5 mm (stereo)-to-RCA plug: for 2-channel output, such as, Front Left and Right channels
3.5 mm (stereo) Audio/Video-to-RCA plug: for Center,
Subwoofer and Rear Center channels
Installing Hardware 1-28
Positioning Your
Speakers
Good loudspeaker placement can enhance your movie enjoyment, while careless placement can make good audio systems sound bad. For detailed loudspeaker placement tips, visit the Dolby
Laboratories web site at http://www.dolby.com/ht/ co_br_0110_ListenersGuideE
X.html
If you are using six speakers, place them to form a circle
around you (as in Figure 1-18)
and angled toward you. Make sure that the computer monitor is not blocking the path of your front speakers. You may want to adjust the relative positions of the speakers until you get the audio experience you like best. If you have a subwoofer, place the unit in a corner of the room for the best bass experience.
SW
FL
RL
CS
RC
Listener
FR
RR
Figure 1-18:Recommended speaker positions.
FL:
Front-left speaker
CS:
Center speaker
FR:
Front-right speaker
RR:
Rear-right speaker
RC:
Rear-center speaker
RL:
Rear-left speaker
SW:
Subwoofer
Installing Hardware 1-29
2
Installing Software
This chapter tells you how to install the Sound Blaster Audigy 2
Platinum software.
Installing Software
Installing Drivers and Applications
• During the installation process, Windows 98 SE users will be prompted to insert the Windows 98 SE installation CD into the CD-
ROM drive. Insert the installation CD into the CD-
ROM drive and then click the
OK
button.
• Some computers may not be supplied with the
Windows 98 SE CD. The necessary files may be found in D:\Windows\
Options\Cabs (where D: represents the drive
Windows has been installed on).
You need to install device drivers and applications prior to using your Sound Blaster
Audigy 2 Platinum. To install these drivers and the selected software applications, use the following instructions. The instructions are applicable to all supported
Windows operating systems.
1. After you have installed the Sound Blaster Audigy 2 card and Audigy 2 Drive, turn on your computer. Windows automatically detects the audio card and device drivers.
2. When prompted for the audio drivers, click the
Cancel
button.
3. Insert the Sound Blaster Audigy 2 Installation and Applications CD into your CD-
ROM drive.
If the drive supports Windows AutoPlay mode, the CD starts running automatically. If not, you need to enable your CD-ROM drive’s auto-insert
notification feature. For more details, see “Problems Installing Software” on page
4. Follow the instructions on the screen to complete the installation.
5. When prompted, restart your computer.
To
feel
the audio card’s awesome gaming, music reproduction and home studio capabilities, install the Sound Blaster Audigy 2 Feature Showcase Demo. This demo
requires high-quality 5.1/6.1 speaker for optimal listening experience. See “Sound
Blaster Audigy 2 Feature Showcase Demo” on page 2-2.
Installing Software 2-1
Sound Blaster
Audigy 2 Feature
Showcase Demo
1. Insert the Sound Blaster Audigy 2 Feature Showcase Demo CD into your CD-ROM drive.
If the drive supports Windows AutoPlay mode, the CD starts running automatically. If not, you need to enable your CD-ROM drive’s auto-insert
notification feature. For more details, see “Problems Installing Software” on page
2. Follow the instructions on the screen to complete the installation, and to run the
Demo.
Uninstalling and
Reinstalling the
Applications and
Device Drivers
At times you may need to uninstall or reinstall some or all of the audio card's applications and device drivers to correct problems, change configurations, or upgrade outdated drivers or applications. The following instructions tell you how to do so in all Windows operating systems.
Before you begin, close all audio card applications. Applications that are still running during the uninstallation will not be removed.
Reinstalling all Audio
Drivers and
Applications
If you think the audio drivers and applications are corrupted, you may want to reinstall
all
of them. To do so:
1. Click
Start
->
Settings
->
Control Panel
.
2. Double-click the
Add/Remove Programs
icon.
3. Click the
Install/Uninstall
tab (
or
Change or Remove Programs
button).
4. Select the
Sound Blaster Audigy 2
entry, and then click the
Add/Remove
(
or
Change/Remove
) button.
5. In the
InstallShield Wizard
dialog box, select the
Repair
button, and then click the
Next
button.
If prompted, insert the Sound Blaster Audigy 2 Installation and Applications CD into your CD-ROM, and click the
OK
button.
6. Click the
Yes
button.
Installing Software 2-2
Uninstalling all
Audio Drivers and
Applications
7. Restart your computer when prompted.
You can now check the computer to see if the reinstalled software works properly. If
not, proceed to “Troubleshooting and FAQs” on page B-1.
For a cleaner installation, you may want to uninstall
all
the audio drivers and applications before you reinstall them again. To do so:
1. Click
Start
->
Settings
->
Control Panel
.
2. Double-click the
Add/Remove Programs
icon.
3. Click the
Install/Uninstall
tab (
or
Change or Remove Programs
button).
4. Select the
Sound Blaster Audigy 2
entry, and then click the
Add/Remove
(
or
Change/Remove
) button.
5. In the
InstallShield Wizard
dialog box, select the
Remove
button, and then click the
Next
button.
6. Click the
Yes
button.
7. Restart your computer when prompted.
To uninstall Creative MediaSource and all its components, do the following:
1. Click
Start
->
Settings
->
Control Panel
.
2. Double-click the
Add/Remove Programs
icon.
3. Click the
Install/Uninstall
tab (
or
Change or Remove Programs
button).
4. Select the
Creative MediaSource
entry, and then click the
Add/Remove
(
or
Change/Remove
) button.
5. In the
InstallShield Wizard
dialog box, click the
Full Uninstallation
button, and then click the
Next
button.
6. Click the
Yes
button.
7. Restart your computer when prompted.
Installing Software 2-3
You may now install existing or updated Sound Blaster Audigy 2 Platinum device
drivers or applications. For more information, see “Installing Drivers and
Installing/
Uninstalling selected
Audio Drivers or
Applications
The above instructions help you to install or uninstall all device drivers or applications. However, you can also install or uninstall
selected
drivers or applications.
You may want to install/uninstall a selected audio driver or application. To do so:
1. Click
Start
->
Settings
->
Control Panel
.
2. Double-click the
Add/Remove Programs
icon.
3. Click the
Install/Uninstall
tab (
or
Change or Remove Programs
button).
4. Select the
Sound Blaster Audigy 2
entry, and then click the
Add/Remove
(
or
Change/Remove
) button.
5. In the
InstallShield Wizard
dialog box, select the
Modify
button, and then click the
Next
button.
6. Click the check box of the application that you want to uninstall to clear it.
If you want to install an application, click the application check box to select it.
7. Click the
Next
button.
If prompted, insert the Sound Blaster Audigy 2 Installation and Applications CD into your CD-ROM, and click the
OK
button.
8. Restart your computer when prompted.
To uninstall a selected component in Creative MediaSource, do the following:
1. Click
Start
->
Settings
->
Control Panel
.
2. Double-click the
Add/Remove Programs
icon.
3. Click the
Install/Uninstall
tab (
or
Change or Remove Programs
button).
4. Select the
Creative MediaSource
entry, and then click the
Add/Remove
(
or
Change/Remove
) button.
Installing Software 2-4
Updating
Windows 2000
(Service Pack 2)
5. In the
InstallShield Wizard
dialog box, click the
Custom Uninstallation
button, and then click the
Next
button.
6. Click the check box of the application that you want to uninstall to select it.
7. Click the
Next
button.
8. Restart your computer when prompted.
Windows 2000 now provides better support for AC-3 SPDIF output (non-PCM through waveOut) for software DVD viewing. Click the web site link below to download the Windows 2000 Service Pack 2 to enjoy this support and to fix other issues in the Windows 2000 OS.
http://www.microsoft.com
Updating
Windows 98 SE
Installing Digital
Video Update
If you have installed DirectX 8.0 or 8.0a run time, install the latest update for this application. (DirectX 8.1 users do not need the update.)
This update provides PAL support and improved device support to 1394 Digital
Video equipment users This is applicable for Windows 98 SE and Windows 2000 users. This update provides minor improvement to the Windows Me OS. To look for this update, go to the web site below.
http://www.microsoft.com
Installing Software 2-5
3
Using Audigy 2 Software
Find out how the software accompanying your audio card can be used to control and customize the card’s features for best performance.
Using Audigy 2 Software
Creative Sound
Blaster Audigy 2
Applications
The applications included with
Sound Blaster Audigy 2 may differ from those described here. Sound Blaster Audigy 2 may also come with third party applications.
The following software is designed for you to access the basic as well as the advanced features of your audio card. We recommend that you familiarize yourself with their functions in order to make full use of Sound Blaster Audigy 2’s rich features.
Demos: Providing an overview of Sound Blaster Audigy 2’s features
Creative Sound Blaster Audigy 2 Getting Started Demo
Creative Sound Blaster Audigy 2 Feature Showcase Demo
Introduction to the Sound Blaster Audigy 2 software suite
Creative MediaSource Go! Launcher
❑
❑
Creative MediaSource Organizer
❑
Creative MediaSource DVD-Audio Player
Creative SoundFont Bank Manager
Creative Audio Stream Recorder 2
Diagnostic and troubleshooting utilities
Using Audigy 2 Software 3-1
Demos
Sound Blaster
Audigy 2 Getting
Started Demo
Sound Blaster
Audigy 2 Feature
Showcase Demo
Three demo packages have been included to showcase the basic as well as the advanced features of your Sound Blaster Audigy 2 card. We recommend that you play them at least once in order to have a good overview of your card’s features.
This is a good starting point from which you can learn about Sound Blaster Audigy
2. The Sound Blaster Audigy 2 Getting Started Demo consists of several interactive and informative demos that highlight different aspects of Sound Blaster Audigy 2: experiencing digital music and digital gaming, watching movies, connecting speakers, and performing tasks.
Use the Sound Blaster Audigy 2 Feature Showcase Demo to
feel
the audio card’s awesome gaming, music reproduction, and home studio capabilities.
Experience the following exciting features of the new Sound Blaster Audigy 2:
❑
DVD-Audio Playback — Learn more about this new, high-resolution music format and experience the difference when a DVD-Audio clip is being played.
❑
EAX ADVANCED HD technologies — Experience complex multi-environment audio effects as you navigate through a fascinating virtual 3D world. Run this demonstration and experience EAX ADVANCED HD technologies such as
Environment Panning, Environment Reflection and Environment Morphing.
Compare the scenes with and without EAX ADVANCED HD, and you will understand why more game developers are using EAX ADVANCED HD technologies for the best gaming experience.
❑
Dolby Digital Surround EX Support — Listen to a THX audio demonstration containing an additional rear channel (rear center) that produces a richer and more consistent surround effect than that of systems with only two rear channels.
Note:
The Sound Blaster Audigy 2 Feature Showcase Demo can be installed using the Sound
Blaster Audigy 2 Feature Showcase Demo CD in your package. This demo will run only if a
Sound Blaster Audigy 2 card is installed because the software utilizes the card’s hardware capabilities for the demonstrations.
Using Audigy 2 Software 3-2
SoundFont
Showcase
SoundFont Showcase contains a wide and comprehensive range of downloadable
SoundFont demos from companies like Sonic Implants and Voice Crystal. You can also learn how to create and manage your own SoundFont banks in here.
For more information and usage details on SoundFont Showcase, refer to its online
Help.
Introduction to the Sound
Blaster Audigy 2 software suite
This section walks you through the main suite of the Sound Blaster Audigy 2 software that enables you to make full use of Sound Blaster Audigy 2’s versatile and powerful features.
Creative
MediaSource Go!
Creative MediaSource Go! is a convenient launch pad, not only for Creative
MediaSource's components, but also for your own frequently used applications. If you have desktop shortcuts for your favorite applications, you can place them in one central location, Creative MediaSource Go!
The Creative MediaSource Go! button launches Creative MediaSource Go! Launcher.
Creative MediaSource Go! floats on your desktop as a small profile bar. Clicking a button on the bar causes it to expand horizontally into a shortcut bar. Creative
MediaSource Go! Launcher contains icons that launch the various MediaSource modules for controlling Sound Blaster Audigy 2. You can also add your own shortcut icons to Creative MediaSource Go!.
For more information and usage details on Creative MediaSource Go!, refer to its online Help .
Using Audigy 2 Software 3-3
Creative
MediaSource Go!
Launcher
Creative
MediaSource Player
Just like the Start button in Windows, Creative MediaSource Go! Launcher provides a single point of access to most of the software programs you need, to control and customize Sound Blaster Audigy 2.
Creative MediaSource Go! Launcher consists of four tabs:
Programs
,
Product
Settings
,
Product Support
and
Companion Products
.
❑
Programs
houses shortcuts to Sound Blaster Audigy 2 applications. You can also add your own shortcuts to other applications.
❑
Product Settings
houses shortcuts to specific programs for changing Sound
Blaster Audigy 2’s hardware settings.
❑
Product Support
contains diagnostic software, product update information, product registration forms, demonstration software as well as helpful documentation such as Getting Started guides.
❑
Companion Products
allows viewing of information on other Creative products and applications.
For more information and usage details on Creative MediaSource Go! Launcher, refer to its online Help .
Creative MediaSource Player is the only software you will need for music and multimedia entertainment. Unlike other media players, Creative MediaSource
Player is specially designed to access the power of your Sound Blaster Audigy 2 hardware. With it, you can:
❑ play back music and multimedia files: MP3, WAV, WMA, NVF, MLP, VideoCD, etc
❑ enhance playback of ordinary music with surround effects using EAX
❑ vary the speed of audio playback without affecting the pitch (Time Scaling)
❑ use Smart Volume Management to play back a list of songs at a similar volume level even if they were originally recorded at different loudness levels
❑ switch between Creative MediaSource Organizer and Creative MediaSource
Player with just a click of the mouse
Using Audigy 2 Software 3-4
“What-You-Hear” multichannel recording
Creative
MediaSource
Organizer
Finding and organizing songs
Keep your music database up to date
❑ use the built-in Creative MediaSource Recorder to record audio (see the section below).
Use Creative MediaSource Recorder to record at up to 24-bit/96 kHz from any audio sources processed by the Sound Blaster Audigy 2 card. A multichannel What-You-
Hear recording mode lets you capture audio directly from the audio card’s 6.1channel analog speaker outputs, without the need to connect any cables to the Line
Out connectors. You can then capture surround-sound movie/gameplay audio, and even audio content enhanced or upmixed with CMSS and EAX effects. For more information and usage details on Creative MediaSource Player and Recorder, refer to its online Help .
Managing a huge collection of audio CDs and MP3 files can be a headache. With
Creative MediaSource Organizer, you can find any recording easily, no matter where it is stored on your hard disk or external storage devices. The following is a list of tasks you can perform with Creative MediaSource Organizer.
Creative MediaSource Organizer searches your hard disk to compile a database of songs available, called a “PC Music Library” or
PCML
. Once you have a PCML, you can sort it and search for songs. Searching is very fast due to a sophisticated engine and use of three search fields: artist, genre and album.
Once songs have been found, you can create
playlists
to automatically replay them in any desired sequence. You can also enter and edit extra information about each MP3 recording with
ID3
tags.
As songs are added or deleted from your computer and other storage devices, your
PCML will need to be kept up to date. The Media Sniffer will monitor specified folders on your hard disk for file changes, and update your PCML accordingly.
Using Audigy 2 Software 3-5
Transferring songs
Automatically playing multimedia content
Extracting and converting songs
Storing music on recordable CD
NOMAD users can use Creative MediaSource Organizer to transfer music files to and from the computer and other compatible devices.
Media Detector makes it easy for users to access multimedia content from various internal or external media. There is no need to hunt through a maze of different software to play different types of files.
Media Detector automatically recognizes the insertion or connection of CDs, VCDs, and external devices like the NOMAD Jukebox and NOMAD MP3 players. Upon recognition, the content in the media will automatically start playing without further intervention from the user.
Storing hundreds of songs on your computer can consume much hard disk space.
WAV files and tracks from audio CDs can take up to 50 MB per song. To reduce storage on your hard disk, you can convert tracks from audio CDs into smaller 4 to
5 MB MP3 files. Creative MediaSource Organizer’s built-in Rip Now module lets you easily extract tracks from audio CDs, then convert them to MP3 and WMA formats at high resolution bit rates of 320 Kbps and 160 Kbps, respectively.
To eliminate the need for you to manually type the track information of an audio CD’s ripped tracks, a feature called CDDB can connect your computer to the Internet
(Gracenote’s CDDB service) and automatically retrieve the track names and other useful track information for you.
If you have a CD-writer, another way to reduce music storage on your computer’s hard disk is to record audio tracks onto CD-R or CD-RW for playback on many consumer hi-fi devices. Creative MediaSource Organizer’s Burn CD module lets you create your own audio and MP3 CDs from WAV, MP3 and WMA files. The Burn CD feature also lets you easily design, create, and print matching CD covers and liner notes for your audio CDs.
Using Audigy 2 Software 3-6
Creative
MediaSource DVD-
Audio Player
Creative EAX
Console
Audio Effects:
Environmental Sound
Processing
For more information and usage details on Creative MediaSource Organizer, refer to its online Help .
Use this application to play back today’s highest quality audio recordings available on DVD-Audio discs. You can enjoy 24-bit/96 kHz multichannel surround sound music, or stereo recordings of up to 24-bit/192 kHz resolution. Creative
MediaSource DVD-Audio Player requires genuine Intel Pentium III 800 MHz,
Windows 2000 SP2 or Windows XP SP1, and a DVD-ROM drive of at least 6X speed.
EAX Console allows you to configure the Audigy 2 processor's effects engine.
EAX ADVANCED HD promises to deliver sounds that are so life-like, you can almost see them! It is the computer industry's first system to recreate and deliver realworld, interactive audio experiences in games, music, and other audio applications.
These audio effects take your computer beyond home-theater quality, immersing you in sound so vivid, your imagination can almost “see” it. The effects go beyond today's surround sound and 3D positional audio, to actually model an environment by taking into account room size, acoustic properties, reverb, echo, and many other effects that create a real-world experience.
EAX Console consists of four sections:
Audio Effects
,
CMSS 3D
,
Audio Clean-up
, and
Time Scaling
.
In Audio Effects, you can choose how you want to enhance all kinds of ordinary twochannel sounds.
❑
Advanced EQ
lets you boost or de-emphasize the low, mid or high frequencies of sound to suit individual preference and equipment characteristics. Choose various presets like Jazz or Rock to suit the audio characteristics you like best.
❑
Special Effects
let you modify sounds with pre-programmed algorithms so that male voices can be turned into female voices, or human speech turned into
“chipmunk talk”. You can have lots of fun, especially when communicating over the Internet.
Using Audigy 2 Software 3-7
CMSS 3D: Simulating
Surround Sound
Audio Clean-up:
Removing noise and distortion
❑
Studio Effects
can add standard distortion, wah, delays and chorus effects to an electric guitar or other musical instrument.
❑
Environmental Effects
simulate typical acoustic environments like stadiums, concert halls, and jazz clubs. By choosing an effect like “concert hall”, you can make any music sound like it is being produced inside a concert hall, with all the characteristic echos and reverbration. Various settings let you vary the type of effect, amount of effect applied, and others. If you have connected rear speakers to your computer, EAX will trick your ears into believing that your room has turned into a concert hall or jazz club. EAX becomes more effective as the number of speakers connected is increased. It supports up to 6 speakers and one subwoofer.
❑
Karaoke Effects
let singers add high-quality echo to add richness to their voices.
Users can also vary the music’s pitch to suit their vocal range.
Creative MultiSpeaker Surround (CMSS) 3D makes ordinary two-channel (Left and
Right Stereo) sound seem to surround you, even through only two speakers. For users with 5.1 or 6.1 multichannel speaker systems, CMSS can also simulate surround sound from ordinary stereo. This is useful for watching DVDs and VCDs, which contain only stereo soundtracks.
Select CMSS for multichannel audio enhancement on 4/4.1, 5.1 or 6.1 speaker systems, and CMSS2 for movies.
Note:
For a 4/4.1-speaker system, audio for your subwoofer is processed by the speaker system.
Audio Clean-up allows you to process prerecorded as well as real-time audio, in order to remove noise, click sounds and other artifacts. For example, when recording music from old vinyl records, “click” and “pop” sounds can be removed with the Clean-up feature. The Click Meter informs you whenever the noise cleanup feature is activated during recording and also how many clicks are removed.
Using Audigy 2 Software 3-8
Time Scaling: Varying the speed of playback
Creative Surround
Mixer
Creative Speaker
Settings
Karaoke fans and musicians may sometimes wish to slow a song down (or speed it up) to catch the lyrics or play along with the music. However, varying the speed usually also varies the pitch of the song. With the Time Scaling feature, Sound
Blaster Audigy 2 users can maintain the pitch of a song while varying the playback speed.
For more information and usage details on EAX Console, refer to the Creative EAX online Help .
Use Creative Surround Mixer to select the device you wish to listen to or record from.
It operates in two possible modes. Click the
Basic Mode
or
Advanced Mode
button to switch between the two modes:
In Basic mode, you can:
❑ mix sounds from various audio input sources when playing or recording
❑ control volume, bass and treble
In Advanced mode, you can:
❑ control balance and vary the loudness ratio between front/rear speakers (fader)
❑ control the relative loudness levels between Front Center, Rear Center and
Subwoofer speakers (if any)
For more information and usage details on Creative Surround Mixer, refer to its online Help .
This is the main application to use for the following tasks:
❑
Designating the number and configuration of speakers to use
❑
Testing your speakers
❑
Activating or deactivating Digital Output
❑
Managing bass output by selecting subwoofer crossover frequency and volume
Using Audigy 2 Software 3-9
Creative Speaker
Calibrator
Creative MiniDisc
Center
Creative SoundFont
Bank Manager
Creative Speaker Calibrator assists you in optimizing loudspeaker settings and positioning to create much better surround sound and gaming sound effects.
Creative MiniDisc Center allows you to play back songs on CDs or supported audio formats, and record them to digital recorders such as Digital Audio Tape machines, and also MiniDisc (MD) recorders.
With MiniDisc Center, you can:
❑ create an album of your favorite songs, each of which may be in a different audio format
❑ insert a preset period of silence automatically between each track
❑ play back your personal album and record it to your MD recorder
For more information and usage details on Creative MiniDisc Center, refer to its online Help .
You can use Creative SoundFont Bank Manager to easily switch between multiple
SoundFont banks for performances. This module is optimized to let users quickly audition various presets, reset MIDI devices, or create/modify/save various
SoundFont banks from your computer’s RAM. Creative SoundFont Bank Manager also switches the Drum Kit on or off at Midi Channel 10.
A virtual keyboard is provided for the user to use the computer’s keyboard or mouse to audition SoundFont banks or play musical notes produced through MIDI devices.
To edit the presets in the SoundFont banks, use Vienna SoundFont Studio, which you can download from http://www.SoundFont.com.
You can use external MIDI input devices to audition your MIDI banks and instruments. First, connect a MIDI input device to your audio card and then select that device in the Creative SoundFont Bank Manager. Once you discover the power of SoundFont technology, you will be amazed at the sound design possibilities available.
Using Audigy 2 Software 3-10
Creative Audio
Stream Recorder 2
Creative Wave
Studio
For more information and usage details on Creative SoundFont Bank Manager, refer to its online Help .
Normally, to listen to a song on the Internet, you need to download the entire file onto your hard disk first — before you can even
hear
the music.
Internet radio stations can, however, make it more convenient for you to enjoy downloaded music: they employ “streaming” technology by which music data flows like a “stream” to your audio card
directly
,
bypassing permanent hard disk storage
.
Thus, the song starts to play as soon as a portion of its data stream has arrived at your audio card. The downside of streaming technology was that you could not record the music onto your hard disk for future reference.
Audio Stream Recorder 2 (ASR2) is designed to overcome this problem by letting you record streaming audio onto your hard disk as standard MP3 or WMA files.
To use ASR2, select from its predefined list of radio stations to listen to. You can click the red Record button to start recording music to your hard disk, or use the Schedule feature to program the computer to record streaming music unattended. You can also use ASR2 to listen to selected radio stations live by clicking the blue Play button.
For more information and usage details on Creative Audio Stream Recorder 2, refer to its online Help .
When you need to edit sound files, use Creative Wave Studio. This application supports popular file formats like WAV and AIFF. With Wave Studio, you can convert between file formats and edit out any section of sound. Apply effects like fade-in/ fade-out. You can also use it to blend two or more songs into a single file.
For more information and usage details on Creative Recorder, refer to its online Help .
Using Audigy 2 Software 3-11
Diagnostic and troubleshooting utilities
Creative Diagnostics
Use Creative Diagnostics to quickly test your audio card’s Wave, MIDI or CD Audio playback capability, recording function and speaker output. For more information and usage details on Creative Diagnostics, refer to its online Help .
Creative Speaker
Settings
This is the main application to use for managing your speakers and troubleshooting
problems related to speaker configurations. See “Creative Speaker Settings” on page 3-9.
Using Audigy 2 Software 3-12
A
General Specifications
This section displays the specifications of your Sound Blaster
Audigy 2 card, Joystick/MIDI bracket and Audigy 2 Drive.
General Specifications
This section displays the specifications of your Sound Blaster Audigy 2 card,
Joystick/MIDI bracket and Audigy 2 Drive.
Features
PCI Bus Mastering
Audigy 2 Processor
High Quality Audio
Path
❑
PCI Specification Version 2.1 compliant
❑
Bus mastering reduces latency and speeds up system performance
❑
Advanced hardware accelerated digital effects processing
❑
32-bit digital processing, which maintains a 192 dB dynamic range
❑
Patented 8-point interpolation that reduces distortion to inaudible levels
❑
64-voice hardware wavetable synthesizer
❑
Professional quality digital mixing and equalization
❑
Mixes analog sources such as CD Audio, Line in, Auxiliary, TAD and PC speaker,
Microphone in via AC’97 Codec with internal digital sources
❑
Playback of 64 audio channels, each at an arbitrary sample rate
❑
32-bit mixing of all digital sources within Audigy 2’s Digital Mixer
❑
24-bit Analog-to-Digital conversion of analog inputs at 96 kHz sample rate
❑
24-bit Digital-to-Analog conversion of digital sources at 96 kHz to analog 6.1 speaker output
❑
24-bit Digital-to-Analog conversion of stereo digital sources at 192 kHz to stereo output
❑
16-bit to 24-bit recording sampling rates: 8, 11.025, 16, 22.05, 24, 32, 44.1, 48 and 96 kHz
General Specifications A-1
Professional Digital
Audio Processing
❑
Supports Sony/Philips Digital Interface (SPDIF) format of up to 24-bit/96 kHz quality
❑
SPDIF output at selectable sampling rate of 48 or 96 kHz
Note:
SPDIF output not available during playback of protected digital audio contents authored with DRM (Digital Rights Management) technology
❑
Selectable 6-channel SPDIF output to matching digital speaker systems
❑
Software switching of SPDIF Input-to-Output (bypass) to minimize cable connection hassle
❑
Low latency multitrack recording with ASIO support
Flexible Mixer Control
❑
Software playback control of CD Audio, Line In, Auxiliary, TAD, PC speaker,
Microphone In, Wave/DirectSound device, MIDI device and CD Digital (CD SPDIF)
❑
Software recording control of Analog Mix (sum of CD Audio, Line In, Auxiliary,
TAD, PC speaker) Microphone In, Wave/DirectSound device, MIDI device and CD
Digital (CD SPDIF)
❑
Selectable input source or mixing of various audio sources for recording
❑
Adjustable master volume control
❑
Separate bass and treble control
❑
Front and rear balance control
❑
Muting and panning control for mixer sources
THX Certification
❑
Sound Blaster Audigy 2 has received the prestigious THX very best music and movie experiences.
®
Multimedia
Certification award, making it the perfect choice for PC audiophiles seeking the
Dolby Digital (AC-3)
Decoding
❑
Decodes Dolby Digital Surround EX to 6.1 or 5.1 channels or pass-through compressed SPDIF bitstream to an external decoder
❑
Bass redirection: enhances bass output to subwoofer for small satellite speaker systems
General Specifications A-2
Creative Multi Speaker
Surround (CMSS)
SB1394/FireWire
Compatibility
❑
Crossover bass frequency (10–200 Hz): adjustable to standalone subwoofer units for desired bass level
❑
Adjustable Center, Rear Center and LFE level control
❑
Multispeaker technology
❑
Upmixes mono or stereo sources to 6.1 channels
❑
Professional-quality panning and mixing algorithm
❑
Compliant to IEEE 1394a specification
❑
Supports data rates of 100, 200, and 400 Mbps
❑
Supports up to 63 IEEE 1394 compatible devices in a daisy-chain configuration
❑
Supplies up to 3 watts to IEEE 1394 compatible devices
Connectivity
Sound Blaster
Audigy 2 card
Audio Inputs
❑
One line-level analog Line input via stereo jack on rear bracket
❑
One mono Microphone analog input via stereo jack on rear bracket
❑
CD_IN line-level analog input via 4-pin Molex connector on card
❑
AUX_IN line-level analog input via 4-pin Molex connector on card
❑
TAD line-level analog input via 4-pin Molex connector on card
❑
CD_SPDIF digital input via 2-pin Molex connector on card
General Specifications A-3
Audio Outputs
SB1394/FireWire Interfaces
❑
DIGITAL OUT via 4-pole 3.5 mm minijack on rear bracket
❑
Three line-level analog outputs via 3.5 mm minijacks on rear bracket: front, rear, and rear center/center/subwoofer Line-Outs 1, 2 and 3
❑
Stereo headphone (32-ohm load) support on Front Line-Out
❑
One 2 x 5 pin Internal SB1394/FireWire connector on card
❑
One 6-pin SB1394/FireWire port on rear bracket
The 6-pin SB1394/FireWire connector/port has a 3 watt maximum power output.
Connect only one high power usage device such as the
IEEE 1394 hard disk and CD-
RW drive to this port unless it is self-powered.
Interfaces
❑
AD_EXT 2 x 20 pin header for connection to Audigy 2 Drive
❑
JOYSTICK 2 x 8 pin header for connection to the Joystick/MIDI connector
(optional attachment)
General Specifications A-4
Audigy 2 Drive
Audio/Video Inputs and
Outputs On Front
Panel
Interfaces
❑
Two RCA jacks for coaxial SPDIF input and output
❑
One headphone output with auto detection via ¼” stereo jack with volume control
❑
One shared line-level analog Line/Microphone input (Line In 2/Mic In 2) via ¼” stereo jack. Shared input selectable via switch with gain control for microphone
❑
Two mini DIN female connectors for MIDI input and output
❑
Two RCA jacks for left and right channel stereo Auxiliary inputs
❑
Two optical connectors for optical SPDIF input and output
❑
One SB1394/FireWire connector for IEEE 1394 input and output
❑
One 4-pin power supply header for connection to system power supply unit
❑
One 2 x 20 pin AD_EXT header for connection to Sound Blaster Audigy 2 card
❑
One Infrared receiver for receiving infrared signals from the remote control
❑
One 2 x 5-pin SB1394/FireWire header for connection to the Sound Blaster
Audigy 2 card
General Specifications A-5
B
Troubleshooting and FAQs
This section provides solutions to problems you may encounter during installation or normal use.
Troubleshooting and FAQs
Problems
Installing
Software
This appendix provides solutions to problems you may encounter during installation or normal use.
The installation does not start automatically after the Sound Blaster Audigy
2 Installation and Applications CD is inserted.
The AutoPlay feature in your Windows system may not be enabled.
To start the installation program through the My Computer shortcut menu:
1. Double-click the
My Computer
icon on your Windows desktop.
2. In the
My Computer
window, right-click the CD-ROM drive icon.
3. On the shortcut menu, click
AutoPlay
and follow the instructions on the screen.
To enable AutoPlay through Auto Insert Notification:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
window, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Device Manager
tab and select your CD-ROM drive.
4. Click the
Properties
button.
5. In the
Properties
dialog box, click the
Settings
tab and select
Auto Insert
Notification
.
6. Click the
OK
button to exit from the dialog box.
Troubleshooting and FAQs B-1
Problems with
Sound
There is unexpected excessive environmental sound or effects when an audio file is played.
The last selected preset is an inappropriate environment for the current audio file.
To switch to an appropriate environment:
1. Click the
Audio Effects
tab in EAX Console.
2. Click the
Enable/Disable Audio Effects
check box to clear it.
Note:
The preset box title may change, depending on the effect you select.
No sound from the headphones.
Check the following:
❑
The headphones are connected to the Headphones jack.
❑
In the
Speaker Selection
tab of Creative Speaker Settings, the
Headphones
option is selected in the
Speaker/Headphone Selection
box.
❑
In the
Basic
tab of Creative Surround Mixer, the recording source selected is
“What U Hear”
.
Individual analog recording sources are not displayed in Creative Surround
Mixer.
The following analog recording sources are combined in one recording control called
Analog Mix (Line/CD/TAD/Aux/PC)
, which is found in the
Record
panel of the
Basic
tab:
❑
Line-In
❑
CD Audio
❑
Auxiliary
❑
TAD-In
❑
PC Speaker
Troubleshooting and FAQs B-2
Individual analog recording sources cannot be selected in Creative
Surround Mixer.
Five analog recording sources are combined under the selection
Analog Mix (Line/
CD/TAD/Aux/PC)
To record an individual analog source:
❑
In the
Record
panel of the
Basic
tab in Creative Surround Mixer, make sure the recording source selected is
Analog Mix (Line/CD/TAD/Aux/PC)
.
❑
In the
Source
panel, mute the analog sources that you do not want to record by clicking the
Speaker
button to change it to a button with a
red cross sign
on it.
No sound from the speakers.
Check the following:
❑
You have connected your speakers to your card's output.
❑
You have selected the correct source in the
Source
panel of Creative Surround
Mixer.
❑
If both the above conditions have been met and you still do not get any sound, click the
red plus sign
above the
Volume
control and check whether the
Digital
Output Only
check box is selected. If it is, you are in the Digital Output Only mode and so must connect to digital speakers to hear the sound from your audio card. See the section on “Speaker Selection Settings” in Creative Speaker
Setting’s online Help for more information.
No audio output when playing digital files such as .WAV, MIDI files or AVI clips.
Check the following:
❑
The speakers’ volume control knob, if any, is set at mid-range. Use Creative
Surround Mixer to adjust the volume, if necessary.
Troubleshooting and FAQs B-3
❑
The powered speakers or external amplifier are connected to the card’s Line Out or Rear Out jack.
❑
There is no hardware conflict between the card and a peripheral device. See
“Resolving I/O Conflicts” on page B-11.
❑
The Speaker selection in Creative Speaker Settings corresponds to your speaker or headphone configuration.
No audio output when playing audio CDs or DOS games that require a CD-
ROM.
To solve this problem:
❑
Make sure the Analog Audio connector on the CD-ROM drive and the CD In connector on the audio card are connected.
❑
Enable digital CD playback:
For Windows 98 SE i. Click
Start
->
Settings
->
Control Panel
.
ii. In the
Control Panel
dialog box, double-click the
Multimedia
icon.
iii. In the
Multimedia Properties
dialog box, click the
CD Music
tab.
iv. Click the
Enable digital CD audio for this CD-ROM device
check box to select it.
v. Click the
OK
button.
For Windows Me i. Click
Start
->
Settings
->
Control Panel
.
ii. In the
Control Panel
dialog box, double-click the
System
icon.
iii. In the
System Properties
dialog box, click the
Device Manager
tab.
iv. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
v. Right-click the disk drive icon. A menu will appear.
vi. Click
Properties
.
vii.In the
Digital CD Playback
box of the next dialog box, click the
Enable digital CD audio for this CD-ROM device
check box to select it.
Troubleshooting and FAQs B-4
viii.Click the
OK
button.
For Windows 2000 and Windows XP i. Click
Start
->
Settings
->
Control Panel
.
ii. In the
Control Panel
dialog box, double-click the
System
icon.
iii. In the
System Properties
dialog box, click the
Hardware
tab.
iv. Click the
Device Manager
button.
v. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
vi. Right-click the disk drive icon. A menu will appear.
vii.Click
Properties
.
viii.In the
Digital CD Playback
box of the next dialog box, click the
Enable digital CD audio for this CD-ROM device
check box to select it.
Panning a source sometimes turns off its sound.
This occurs when you are in the Digital Output Only mode and the source’s left-right balance in a software mixer application other than Creative Surround Mixer (for example, the Windows Volume Control application) is at the opposite end compared to the position to which you have panned the source in the
Basic
tab of Creative
Surround Mixer. For example, the CD Audio balance in Windows Volume Control is on the left but in Creative Surround Mixer you have panned the CD Audio to the right.
To solve this problem:
Open that other mixer, and center the balances for all the audio input sources.
This ensures that your analog sources will not turn silent when you pan them in
Creative Surround Mixer.
Troubleshooting and FAQs B-5
Problems with
File Transfers on
Some VIA
Chipset
Motherboards
After you install the Audigy 2 card on a VIA chipset motherboard, you may have the slight chance of seeing one of the following:
When transferring large amounts of data, the computer stops responding
(‘hangs’) or restarts itself, OR
Files transferred from another drive are incomplete or corrupted.
These problems appear in a small number of computers, which contain the VIA
VT82C686B controller chipset on their motherboards.
To verify if your motherboard has the VT82C686B chipset:
❑
Refer to your computer or motherboard manual, or
❑
In Windows: i. Click
Start
->
Settings
->
Control Panel
.
ii. Double-click the
System
icon.
iii. Click the
Device Manager
or
Hardware
tab.
iv. Click the
Systems devices
icon. v. In the list that appears, see if the items
highlighted in Figure B-1 appear.
vi. If the items appear, remove your computer cover and locate the VIA chipset on your motherboard.
(Take note of the safety precautions on page 1-
The VT82C686B chipset has its model number inscribed on the chip.
If you have the VT82C686B chipset:
❑
Creative recommends that you first contact your computer vendor or motherboard manufacturer for the latest solution.
Figure B-1: Device Manager tab.
❑
Some users have solved the above problems by doing one or both of the following:
Troubleshooting and FAQs B-6
Insufficient
SoundFont
Cache
The trade-off of a smaller
SoundFont file is its lower sound quality.
• downloading the latest VIA 4in1 drivers from http://www.viatech.com*,
• obtaining the most current BIOS for your motherboard from the manufacturer’s web site*.
*Content in these web sites is controlled by other companies. Creative bears no responsibility for information or downloads obtained from them. This information is provided only as a convenience to you.
There is insufficient memory to load SoundFont banks.
This may occur when a SoundFont-compatible MIDI file is loaded or played while insufficient memory has been allocated to Creative SoundFont Bank Manager.
To have sufficient SoundFont cache memory:
❑
Remove one or more SoundFont banks from your SoundFont cache.
Do the following: i. Click the
Bank
button.
The
Configure Bank
dialog box appears.
ii. Click the
Select Bank
drop-down button, and select a bank index.
iii. Highlight the bank and click the
Remove
button.
iv. Click the
OK
button to finish configuring your banks.
❑
Load smaller SoundFont banks instead; or add more RAM to your system.
Do one of the following:
• In the
Configure Bank
dialog box of Creative SoundFont Bank Manager, select a smaller SoundFont bank, if available, from the
Select Bank
box.
• Increase the system RAM on your computer. For more details, visit the www.soundblaster.com
site for technical help.
Note:
The amount of SoundFont cache you can allocate depends on the system RAM available. Your computer may slow down if the amount of cache used is too high.
Troubleshooting and FAQs B-7
Problems with
Joystick
Do not attempt to make changes to the BIOS unless you have experience with system software.
The joystick port is not working.
The audio card’s Joystick/MIDI connector may be conflicting with the system’s joystick port.
To solve this problem:
Disable the audio card’s Joystick/MIDI connector and use the system port instead.
Do the following:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
window, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Device Manager
tab.
4. Double-click
Sound, Video And Game Controllers
, and then select
Creative
Audigy 2 Gameport
(
Creative Game Port
for Windows 2000).
5. Click the
Properties
button.
6. In the Properties dialog box:
If you have an
Original Configuration (Current)
check box:
• Clear the check box to disable it.
If you have a
Disable In This Hardware Profile
check box:
• Make sure that the check box is selected to disable it.
7. Click
OK
to restart Windows and for the change to take effect.
When the Gameport Joystick interface is disabled, the entry in Device Manager has a red cross.
The joystick is not working properly in some programs.
The program may use the system processor timing to calculate the joystick position.
When the processor is fast, the program may determine the position of the joystick incorrectly, assuming that the position is out of range.
Troubleshooting and FAQs B-8
Problems with
Multiple Audio
Devices
To solve this problem:
Increase your system’s 8 bit I/O recovery time of the BIOS setting, usually under the Chipset Feature Settings section. Or, if available, you may adjust the AT Bus speed to a slower clock. If the problem persists, try a different joystick.
The other installed audio card is not working well.
You may have an existing audio device installed in your computer. The audio device may be an audio card or an onboard audio chipset. Before you install your Sound
Blaster Audigy 2 card, you are advised to completely uninstall and remove your existing audio device. Operating multiple audio devices in your computer may introduce usability issues.
Alternatively, during the installation of your Sound Blaster Audigy 2 card, do the following:
❑
If your computer detects an installed Sound Blaster Live! Series or Sound Blaster
PCI512 audio card, a message box recommending that you completely uninstall and remove the older audio device will appear. Click the
Yes
button and follow the instructions on the screen to complete the removal of the old audio device.
Remove the old audio card from your computer.
❑
If your computer detects any other installed audio card, a message box recommending that you completely uninstall and remove the older audio device will appear. Click the
Yes
button to continue with the installation of the Sound
Blaster Audigy 2 card.
After the installation of the Sound Blaster Audigy 2 card, completely uninstall the existing card and remove the audio card from your computer.
The onboard audio chipset is not working well.
To disable an onboard audio chipset, do the following:
1. Restart your system.
Troubleshooting and FAQs B-9
Problems with
Sound Blaster
Live! Series or
Sound Blaster
PCI512 card
2. During the memory check, press <F2> or <Delete>, depending on your motherboard.
The BIOS setup menu appears.
3. Select
Chipset Features Setup
and press <Enter>.
4. Select
Onboard Legacy Audio
and press <Enter> to disable your onboard audio chipset.
5. Press <Esc> to return to the BIOS setup menu.
6. Select
Save & Exit Setup
, and then press <Enter>.
7. Press <Y> and then press <Enter>
Sound Blaster Live! or Sound Blaster PCI512 applications are not working.
Other than normal playback and recording functions, older audio devices may not work well when Sound Blaster Audigy 2 is installed.
To solve this problem:
Uninstall and remove the older card from the computer. Otherwise, you can choose to disable the Sound Blaster Live! or Sound Blaster PCI512 card:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
window, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Device Manager
tab.
4. Double-click
Sound, Video And Game Controllers
, and then select
Creative
Sound Blaster Live! Series
or
Creative Sound Blaster PCI512
.
5. Click the
Properties
button.
6. In the Properties dialog box:
If you have an
Original Configuration (Current)
check box:
• Clear the check box to disable it.
If you have a
Disable In This Hardware Profile
check box:
• Make sure that the check box is selected to disable it.
Troubleshooting and FAQs B-10
Resolving I/O
Conflicts
You can also refer to the
Troubleshooting section in the online Help of Windows 98 SE/
Me.
7. Click
OK
to restart Windows and for the change to take effect.
When the Sound Blaster Live! series is disabled, the entry in Device Manager has a red cross.
Conflicts between your audio card and another peripheral device may occur if your card and the other device are set to use the same I/O address.
To resolve I/O conflicts, change the resource settings of your audio card or the conflicting peripheral device in your system using Device Manager in Windows 98
SE/Me.
If you still do not know which card is causing the conflict, remove all cards except the audio card and other essential cards (for example, disk controller and graphics cards). Add each card back until Device Manager indicates that a conflict has occurred.
To resolve hardware conflicts in Windows 98 SE/Me:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
window, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Device Manager
tab.
4. Under the Sound, Video And Game Controllers entry, select the conflicting audio card driver—indicated by an exclamation mark (!)—and click the
Properties
button.
5. In the Properties dialog box, click the
Resources
tab.
6. Make sure that the
Use automatic settings
check box is selected, and click the
OK
button.
7. Restart your system to allow Windows 98 SE/Me to reassign resources to your audio card and/or the conflicting device.
Troubleshooting and FAQs B-11
Problems with
Encore DVD
Player
Problems with
Software DVD
Player
The Encore DVD Player is not launched when a DVD disc is inserted into the drive.
To solve this problem:
1. In the Windows system tray, right-click the Disc Detector icon, and then click
Properties
.
2. On the
General
tabbed page of the
Creative Disc Detector
dialog box, make sure that the
Enable Disc Detector
check box is selected.
3. Click the
Players
tab.
4. Select the DVD Disc entry and then click the
Select Player
button.
5. In the
Players Properties
dialog box, click the
Browse
button.
6. Locate and select D:\Program Files\Creative\PC- DVD Encore (where D: represents your CD-ROM drive) and double-click the entry
ctdvdply
.
The
Name
box now displays the entry
ctdvdply
.
7. Click the
OK
button twice.
Changing audio configuration (for example, switching from multichannel mode to SPDIF Output mode or vice versa) while watching a DVD movie does not seem to work, even though all settings in the software DVD player and in Creative Surround Mixer are correct.
To solve this problem:
Close and restart the software DVD player.
Troubleshooting and FAQs B-12
Problems with
DV driver for
Windows 98 SE/
2000/Me/XP
The 1394 DVConnect driver does not run on Windows XP.
The DV camcorder is not working properly.
The MSDV camcorder driver may not be the latest version (v4.10.2226).
To solve this problem:
1. Visit www.Microsoft.com
and download the Digital Video update for the DirectX
8.0 file (dx80bda.exe).
2. Install the above file into your computer.
Note:
You need to install DirectX 8.0 or 8.0a run time first.
If the problem still persists, the MSDV camcorder driver may not be fully optimized for your DV camcorder.
To solve this problem:
1. Turn on your DV camcorder.
2. Insert the Sound Blaster Audigy 2 Installation and Applications CD into your CD-
ROM drive.
Exit from the welcome screen.
3. Using Windows Explorer, locate the
1394
folder in the CD-ROM, and run the
DVConnect 240.exe file. Follow the instructions on the screen to complete the setup.
If you are in Windows 98 SE, you may be prompted to insert the Windows 98 SE
CD-ROM first. Follow the instructions on the screen to complete this setup.
4. Click the
Finish
button.
5. Turn off and then turn on your DV camcorder.
Troubleshooting and FAQs B-13
Problems in
Windows XP
A Hardware Installation error message appears on a Windows XP operating system when non-Creative applications are being installed.
At the time of this product's release, Microsoft strongly encouraged companies to submit their hardware solutions for certification. If a hardware device driver is not submitted, or does not qualify, for Microsoft certification, a warning message similar to the one below appears.
You may see the message when you install hardware drivers from companies other than Creative. If you do, you may choose to click the
Continue Anyway
button.
Device drivers not signed by Microsoft may be used in Windows XP, and need not impair or destabilize your computer.
Should you need more XP-related information or help, you can contact the company that developed the driver, at the company's web site or helpline.
Troubleshooting and FAQs B-14
Problems with
Digital Audio
Devices
If you have installed Intel
Application Accelerator version 1.1.2 in your computer, DMA may be automatically selected on all your drives.
Intermittent hissing or no sound is heard from my digital speakers.
Make sure you select the sampling rate of the PCM SPDIF output of your Digital Out connector to match the requirements of the receiving device. You may need to select a lower digital output sampling rate. The choices available are 48 kHz and 96 kHz.
To solve this problem:
1. In Creative MediaSource Go! Launcher, click the
Product Settings
tab.
2. Double-click the
Device Controls
icon.
3. Click the
Sampling Rate
tab.
4. Click the required sampling rate from the
Digital Output Sampling Rate
list.
Popping noises is heard during playback.
Check that the DMA feature is selected for all drives.
To solve this problem:
For Windows 98 SE and Windows Me:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
dialog box, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Device Manager
tab.
4. Double-click the
Disk
drives icon.
Your computer drives will appear.
5. Double-click the hard disk drive icon.
6. In the box that appears, click the
Settings
tab.
7. Click the
DMA
(direct memory access) check box to select it.
An alert message box appears.
8. Click the
OK
button.
9. Click the
OK
button in the next box.
10.Click the
Close
button on the
System Properties
dialog box.
Troubleshooting and FAQs B-15
11.When prompted to restart your computer, click the
Yes
button.
12.Repeat steps 4-11 if you have other drives, for example, other hard disk drives,
CD-ROM, CD-RW, and DVD-ROM drives. In step 4, double-click the respective drive icon.
For Windows 2000 and Windows XP:
1. Click
Start
->
Settings
->
Control Panel
.
2. In the
Control Panel
dialog box, double-click the
System
icon.
3. In the
System Properties
dialog box, click the
Hardware
tab.
4. Click the
Device Manager
button.
5. Double-click the
ATA/ATAPI IDE Controllers
icon.
Your IDE channels will appear.
6. Right-click the
Primary IDE Channel
icon.
7. Click
Properties
.
8. In the
Properties
dialog box, click the
Advanced Settings
tab.
9. Click the
DMA if available
check box to select it.
10.Click the
OK
button.
Troubleshooting and FAQs B-16
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
24-bit/192 kHz audio playback
24-bit/96 kHz audio recording
EAX ADVANCED HD
THX Multimedia Certification
Dolby Digital (AC-3) Decoding
SB1394/FireWire Compatibility
DVD-Audio entertainment with native MLP support
Native MLP (Meridian Lossless Packing) support
6.1 Surround Sound audio
remote control
Frequently asked questions
EAX ADVANCED HD brings a new level of performance, power, and flexibility to PC audio. Taking advantage of the enhanced processing capabilities of the Sound Blaster Audigy 2 processor, EAX ADVANCED HD delivers a host of new features that achieve high definition audio for gaming and music enhancement.
MLP (Meridian Lossless Packing), the method of audio data compression used in DVD-Audio, reduces file size without removing any of the information that was contained in the original recording. The listening audience will hear the audio as it was intended in the original recording.
THX® Multimedia Certification award, making it the perfect choice for PC audiophiles seeking the very best music and movie experiences.
The SB1394TM/FireWire® port provides easy high-speed connectivity to NOMAD® portable digital audio players, external CD-RW drives, and other IEEE 1394 compatible devices like DV camcorders, printers, scanners, and digital still cameras.