PRIME/ESSENTIAL

NAVIGATION QUICK START GUIDE

EN

Initial set-up

1. Select your preferred language, then tap selection. Later you can change it in Regional settings.

to confirm your

2. Read the End User Licence Agreement, and tap the terms of use.

if you agree with

3. The Configuration wizard starts. Tap to continue.

4. Select the language and speaker used for voice guidance messages and tap

. Later you can change it in Regional settings. Tap any item in the list for a short voice sample. Tap to confirm your selection.

. 5. Set your preferred units and time formats, and tap

6. Set your route preferences, and tap .

7. The initial set-up is now complete, tap to enter the map screen.

1

Map screen

The map screen is the most important and frequently used screen of the software. During navigation, the screen shows route information.

The map shows the current position (a green arrow by default), the recommended route (an orange line), and the surrounding map area.

When there is no GPS position, the current position arrow is transparent. It shows your last known position. When a GPS position is available, the current position arrow is displayed in full colour showing your current position.

If you have not selected a route destination, you can see your heading and the current street on the map screen. If you selected a destination, the following three data fields are displayed in the bottom left corner:

• The estimated time of the arrival at the destination

• The remaining time of the trip

• The remaining distance to the destination.

You can change the default values in , ,

or by tapping and holding the area where the data fields appear.

Tap the screen once where the data fields appear to open the Trip Summary screen.

The following additional buttons are displayed when you are navigating a route and you are approaching your destination:

• : Tap it to check the available parking facilities around your destination.

• : Tap it to access additional options: check the trip summary, find Places around your final destination, save the current location, switch to pedestrian navigationor suspend the navigation.

By tapping the street name at the bottom of the map, you can open the Where Am I screen.

By tapping , you can open the Navigation menu.

2

Navigation menu

On the Map screen, tap to open the Navigation menu.

You can see the following menu options when you are navigating without a planned route:

Button Instruction

Select your destination by entering an address or its coordinate, or by selecting a Place, a Saved Location, or a Saved Route. You can also look up your recent destinations from the Smart History.

Build your route from one or more route points. You can also plan a route independently of your current GPS position by setting a new starting point.

Check the traffic events affecting your route, or view historical traffic data.

Access additional options and to check some useful information, for example traffic information, fuel prices, and so on.

Customise the way the navigation software works.

See information about the navigation software.

Stop the navigation and exit the software.

When you are navigating with a planned route, the following menu options are also available:

Button Instruction

Add an intermediate destination to your route.

See route alternatives to avoid parts of the route, or to avoid a specific road from your planned route.

View the route in its full length on the map and to display route parameters and route alternatives. Tap to access additional options, like Simulation or Route Preferences.

Delete your route.

Delete the next waypoint or the whole route.

3

In the navigation menu, you have the following additional options:

Button Instruction

Open the Saved Locations screen where you can save a location as a favourite destination or edit a saved location.

Set the volume or mute the navigation.

Switch to 3D mode.

Switch to 2D mode.

Switch to 2D North up view mode.

Suspend navigation.

Resume navigation.

Access the User profiles menu where you can create new profiles or edit the existing profiles. If more drivers are using the navigation system, they can create their own profiles with their own settings. Their smartphones can be assigned to the relevant user profile, which makes data synchronisation possible between the smartphone and the built-in navigation system.

Button Instruction

Check those notifications that contain important information but do not require immediate action from the users.

Open additional options within the menu options on certain screens.

Return to the map from any menu screen.

4

New Route menu

In the Navigation menu, tap to specify an address as your destination.

The New Route to... menu provides the following options:

Button Instruction

Find your destination regardless of its type in (Undefined variable:

BrandingVariables.NameOfIQS).

Specify an address as your destination.

Select a place of interest as your destination.

Choose from the list of your saved locations.

Choose from the list of all recent destinations.

Select a saved route as your destination or intermediate destination.

Select a destination by entering its coordinate.

Two of your recent destinations are listed in the New Route to... menu for easy access. Tap any of the smart history items to set the location as your destination.

5

Navigating to an address

on the Navigation view to access the Navigation menu. Tap

In the Navigation menu, tap and screen proposes the city or town where you are located.

To change the country, perform the following steps:

. By default, the

1. Tap .

2. Use the keyboard to enter the name of the country. After entering a couple of characters, the names that match the string appear in a list.

3. Tap choice.

to open the list of results and select the country of your

To change the city, perform the following steps:

1. Tap .

2. Use the keyboard to enter the name of the town. After entering a couple of characters, the names that match the string appear in a list.

3. Tap to open the list of results.

4. Select a city/town from the list.

To enter the street name, perform the following steps:

1. Tap .

2. Start entering the street name on the keyboard. After entering a couple of characters, the names that match the string appear in a list.

3. Tap to open the list of results. Select a street from the list.

To enter the house number, perform the following steps:

1. Tap .

6

2. Enter the house number on the keyboard. (To enter letters, tap .)

3. Tap and select the street name and the house number.

The map appears with the selected destination in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location.

(optional) To change some of the route setting parameters, perform the following steps:

1. Tap roads, tap

to avoid motorways, tap

to avoid ferry, or tap

to avoid Period Charge or Per-use Toll

to avoid carpool roads.

2. Tap destination.

to confirm the destination, or tap to select a different

3. After a short summary of the route parameters, the map appears showing the entire route. Tap .

7

Using combined search

You can initiate a separate search for addresses, Places, saved locations, or recent destinations, but the fastest way to search for any of these is to use combined search.

1. On the Map screen, tap

.

to access the Navigation menu and then

2. Tap and the combined search screen appears. Right next to the input field, you can see the search area, the city/town around which the search is carried out. The default search area is the area where you are located. If needed change the search area.

3.

4. With the proper search area displayed, you can start entering the name, address, or category of the destination you are looking for.

5. Tap to see the search results. You can see all results in the list, regardless of their type. Addresses, Places, Place categories, Saved Locations and recent destinations are mixed within one list.

6. If needed, tap the related button to narrow the list of search results by types (the number on the related icon shows the number of matching results):

• Tap address.

to see the list of recent destinations with a matching name or

• Tap to see the list of your saved location (Favourite) destinations with a matching name.

• Tap to see the list of matching addresses.

• Tap to see the list of Place categories. Scroll the list and select one of the categories. You get the list of Places in that category ordered by their distance from your current position.

• Tap to see the list of matching Places ordered by their distance from your current location.

• (optional) Should your product contain Places from different data providers, you can further narrow the list by showing the results from one provider only. Look for the provider logos. Select any of them to see Places from that provider.

8

7. The map appears with the selected destination in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( location.

) appears at the new

8. (optional) If needed, change some of the route setting parameters.

9. Tap destination.

to confirm the destination, or tap to select a different

10. After a short summary of the route parameters, the map appears showing the entire route. Wait for a few seconds or tap .

9

Navigating to a place of interest

1. On the Map screen, tap tap , then tap pre-set search categories:

to access the Navigation menu. In the Navigation menu,

. You are offered the following

• Tap to get a list of petrol stations along the route or if it is not available, around your current position or your last known position.

• Tap to get a list of accommodation near the destination, around your current position or your last known position.

• Tap to get a list of restaurants along the route, around your current position or your last known position.

• Tap to get a list of parking lots near the destination or if it is not available, around your current position or your last known position.

2. Tap to open the Search By Category window. Here, you can search for Places of Interest by their name, categories and subcategories at the following locations:

• Tap to search around the current position or if it is not available, around the last know position.

• Tap to search for a place within a selected city.

• Tap active route.

to search for a place around the destination of the

• Tap to search along the active route, and not around a given point. This is useful when you search for a later stopover that results in a minimal detour only, such as searching for upcoming petrol stations or restaurants.

10

An example of navigating to a place of interest

For example, to find a park around your destination, perform the following steps:

1. On the Map screen, tap tap

to access the Navigation menu. In the Navigation menu,

, then tap .

2. Tap to open the Search By Category window.

3. Select the area around which the Place should be searched for. Tap the

button and select .

4.

5. Browse the list of place categories, and tap one of them.

6. Tap down your search.

to browse the whole category, or tap a subcategory to narrow

7. Tap any of the list items.

8. (optional) If needed, change some of the route setting parameters.

9. Tap destination.

to confirm the destination, or tap to select a different

10. After a short summary of the route parameters, the map appears showing the entire route. Wait for a few seconds or tap .

11

Useful Information menu

The Useful Information menu provides various additional functions. In the Navigation menu, tap . You need an Internet connection via your mobile phone to access online services (for example, parking and weather information).

Button Description

Shows information on the current position (latitude, longitude, nearest town, next crossing street, and so on) or the last known position if GPS reception is not available.

Offers assistance near your current position.

Offers a list of countries with useful driving information about the selected country (for example speed limits, maximum blood alcohol level).

Shows statistical data of your trips, like the start time, end time and average speed.

Shows a world map with the sunlit and dark areas of the world. Tap

to check the exact sunrise and sunset times for all your route points.

Shows the GPS Information screen with satellite position and signal strength information.

12

Settings menu

You can configure the program settings, and modify the behaviour of Zenec Navigation. Tap

, and .

Scroll down to view more options.

The Settings menu provides the following options:

Button Instruction

Select the type of vehicle you are driving, the road types used in route planning, and the route planning method.

Adjust the different sound volumes.

Enable and set up warnings for speed limit, alert points (such as speed cameras), and road signs.

Fine-tune the appearance of the map screen or adjust how the software helps you navigate with different kinds of route-related information on the map screen.

Change the voice guidance language, set the time zone, the measurement units, the time and date, and formats, and customise the application for your local language.

Enable or disable menu animations.

The recommended route is not always the same between two points.

Whenever suitable data exists, traffic information can be taken into account in the route calculation. Set your preferences for this service.

Turn the automatic trip log saving on or off and check the current size of the trip database.

Modify the basic software parameters set during the initial set-up process. See

Page 1 .

13

© Copyright 2015

RevA / copy deadline: Q3-2015