Philips XL3901S/DE User manual

Always there to help you
Register your product and get support at
www.philips.com/welcome
Question?
Contact
Philips
Question?
Contact
Philips
Turqoise
Gray
User manual
XL390
XL395
Question?
Contact
Philips
Duotone
Black / PMS300
1 Important safety instructions 3
2 Your phone 5
What is in the box 5
Overview of the phone 6
Overview of the base station 7
Display icons 8
3 Get started 9
Connect the base station
and charger 9
Install the handset 10
Configure your phone
(country dependent) 11
Change the remote access
PIN code 12
Charge the handset 12
Check the battery level 13
What is standby mode? 13
Check the signal strength 13
4Calls 14
Make a call 14
End a call 15
Answer a call 15
Adjust the earpiece/speaker
volume 16
Mute the microphone 16
Turn the speaker on or off 16
Make a second call 16
Answer a second call 16
Switch between two calls 17
Make a conference call with
external callers 17
5 Intercom and conference
calls 18
Make a call to another handset 18
Transfer a call 18
Make a conference call 18
6 Text and numbers 20
Enter text and numbers 20
Switch between uppercase
and lowercase 20
7Phonebook 21
View the phonebook 21
Search a record 21
Call from the phonebook 21
Access the phonebook
during a call 22
Add a record 22
Edit a record 22
Delete a record 22
Delete all records 23
Direct keys 23
8 Call log 24
Call list type 24
View the call records 25
Save a call record to the
phonebook 25
Return a call 25
Delete a call record 25
Delete all call records 25
9 Redial list 26
View the redial records 26
Redial a call 26
EN
1
English
Contents
Save a redial record to the
phonebook 26
Delete a redial record 26
Delete all redial records 26
10Phone settings 27
Sound settings 27
ECO mode 28
Name the handset 28
Set the backlight of the LCD
screen 28
Set the date and time 28
Set the display language 28
14Telephone answering
machine 36
Turn the answering machine
on or off 36
Set the answering machine
language 37
Announcements 37
Incoming messages (ICM) 39
Remote access 41
15Technical data 43
16Notice 44
Set the alarm 29
Turn off the alarm 29
Use GAP standard compliance 44
Compliance with EMF 44
Disposal of your old product
and batteries 44
12Services 30
17Frequently asked questions 46
11Alarm clock 29
Call list type 30
Auto conference 30
Network type 30
Auto prefix 30
Select the recall duration 31
Dial mode 31
Register the handsets 32
Unregister the handsets 33
Restore default settings 33
13Network services 34
Call forward 34
Call return 34
Call back service 35
Hide your identity 35
2
EN
18Appendix 48
19Index 50
Power requirements
• This product requires an electrical
supply of 100-240 volts AC.
In case of power failure, the
communication can be lost.
• The voltage on the network is
classified as TNV-3 (Telecommunication Network Voltages), as
defined in the standard EN 60950.
Warning
•• The Electrical network is classified as
hazardous. The only way to power
down the charger is to unplug the
power supply from the electrical
outlet. Ensure that the electrical outlet
is always easily accessible.
To avoid damage or malfunction
Caution
•• Use only the power supply listed in
the user instructions.
•• Use only the batteries listed in the
user instructions.
•• Risk of explosion if battery is replaced
by an incorrect type.
•• Dispose of used batteries according
to the instructions.
•• Always use the cables provided with
the product.
•• Do not allow the charging contacts or
the battery to come into contact with
metal objects.
•• Do not let small metal objects come
into contact with the product. This can
deteriorate audio quality and damage
the product.
•• Metallic objects may be retained if
placed near or on the handset receiver.
•• Do not use the product in places
where there are explosive hazards.
•• Do not open the handset, base station
or charger as you could be exposed
to high voltages.
•• For pluggable equipment, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
•• Handsfree activation could suddenly
increase the volume in the earpiece
to a very high level: make sure the
handset is not too close to your ear.
•• This equipment is not designed to
make emergency calls when the power
fails. An alternative has to be made
available to allow emergency calls.
•• Do not allow the product to come
into contact with liquids.
•• Do not use any cleaning agents
containing alcohol, ammonia, benzene,
or abrasives as these may harm the
set.
•• Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
•• Do not drop your phone or allow
objects to fall on your phone.
•• Active mobile phones in the vicinity
may cause interference.
EN
3
English
1 Important
safety
instructions
About operating and storage
temperatures
• Operate in a place where
temperature is always between
0°C to +40°C (up to 90% relative
humidity).
• Store in a place where
temperature is always between
-20°C and +45°C (up to 95%
relative humidity).
• Battery life may be shorter in low
temperature conditions.
4
EN
Congratulations on your purchase and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
What is in the box
Base station (XL390)
English
2 Your phone
Power adapter**
Line cord*
Guarantee
Base station (XL395)
User manual
4XLFNVWDUWJXLGH
Handset**
Quick start guide
Charger**
EN
5
Note
* In some countries, you have to
connect the line adapter to the line
cord, then plug the line cord into the
telephone socket.
**In multi-handset packs, there are
additional handsets, chargers and
power adapters.
e
• Scroll up on the menu.
• Increase the earpiece/speaker
volume.
• Access the phonebook.
f
• End the call.
• Exit the menu/operation.
g
• Press to enter a space during
Overview of the phone
a
b
c
n
d
e
f
text editing.
• Press and hold to lock/unlock
the keypad in standby mode.
h
• Press and hold to enter a
pause.
• Press and hold to switch to
uppercase and lowercase
during editing.
i
Mute/unmute the microphone.
g
h
jMicrophone
k
• Turn the speaker phone on/off.
• Make and receive calls through
the speaker.
aEarpiece
bLoudspeaker
cBattery door
d
• Delete text or digits.
• Cancel operation.
l
Press and hold to make an
intercom call (for multi handset
version only).
mM1/M2/M3
Save the call records for quick dial.
n
• Make and receive calls.
• Recall key
6
EN
XL395
English
o
• Scroll down on the menu.
• Decrease the earpiece/speaker
volume.
• Access the call log.
p
•
•
•
•
a
Access the main menu.
Confirm selection.
Enter the options menu.
Select the function displayed
on the handset screen directly
above the key.
Overview of the base
station
b
c
d
g
f
e
a
• Find handsets.
• Enter the registration mode.
b /
Decrease/increase the speaker
volume.
XL390
c
Skip backward during playback.
d
Skip forward during playback.
a
e
Turn the answering machine on
or off.
a
• Find handsets.
• Enter registration mode.
f
• Play messages.
• Stop messages playback.
g
Delete the current playback
message.
EN
7
Display icons
In standby mode, the icons shown on
the main screen tell you what features
are available on your handset.
Icon
8
Descriptions
When the handset is off the
base station/charger, the bars
indicate the battery level (from
full to low).
When the handset is on the
base station/charger, the bars
keep scrolling until charging is
complete.
The empty battery icon flashes
and you hear an alert tone.
The battery is low and needs
recharging.
It displays the link status
between the handset and base
station. The more bars are
shown, the better the signal
strength is.
It remains steadily on when
browsing incoming calls in the
call log.
It indicates an outgoing call
in the
redial list.
It flashes when there is a new
missed call or when browsing
new missed calls.
It remains steadily on when
the missed calls in the call log
are read.
EN
It flashes when receiving an
incoming call.
It remains steadily on when
you are in a call.
The speaker is on.
The alarm clock is activated.
The ringer is off.
Answering machine: it flashes
when there is a new message.
It displays when the telephone
answering machine is turned
on.
It flashes when there is a new
voice message.
It remains steadily on when
the voice messages are already
viewed in the call log.
The icon is not shown when
there is no voice message.
The silent mode is activated.
The ECO mode is activated.
Caution
•• Make sure that you have read the
safety instructions in the ‘Important
safety instruction’ section before you
connect and install your handset.
Connect the base
station and charger
1 Connect each end of the power
adapter to:
• the DC input jack at the back
of the base station;
• the power socket on the wall.
2 Connect each end of the line
cord to:
• the telephone socket at the
back of the base station;
• the telephone socket on the
wall.
English
3 Get started
Warning
•• Risk of product damage! Make
sure that the power supply voltage
corresponds to the voltage printed on
the back or underside of the phone.
•• Use only the supplied power adapter
to charge the batteries.
Note
•• If you subscribe to the digital
subscriber line (DSL) high speed
internet service through your
telephone line, make sure you install
a DSL filter between the telephone
line cord and the power socket.. The
filter prevents noise and caller ID
problems caused by DSL interference.
For further information on DSL filters,
contact your DSL service provider.
•• The type plate is located on the
bottom of the base station.
EN
9
3 Connect each end of the power
adapter to (for multi handset
versions only):
• the DC input jack at the back
of the extra handset charger.
• the power socket on the wall.
Install the handset
The batteries are pre-installed in the
handset. Pull the battery tape off from
the battery door before charging.
Caution
•• Risk of explosion! Keep batteries away
from heat, sunshine or fire. Never
discard batteries in fire.
•• Use only the supplied batteries.
•• Risk of decreased battery life! Never
mix different brands or types of
batteries.
Note
•• Charge the batteries for 8 hours
before first use.
•• If the handset becomes warm when
the batteries are charging, it is normal.
Warning
•• Check the battery polarity when
inserting in the battery compartment.
Incorrect polarity may damage the
product.
10
EN
1 When using your phone for the
first time, you see a welcome
message.
2 Press [OK].
Set the country/language
Select your country/language, then
press [OK] to confirm.
»»The country/language setting
is saved.
Note
•• The country/language setting option
is country dependent. If no welcome
message is displayed, it means the
country/language setting is preset for
your country. Then you can set the
date and time.
To re-set the language, see the
following steps.
1 Select [Menu] > [Phone setup]
> [Language], then press [OK] to
confirm.
Select
a language, then press [OK]
2
to confirm.
»»The setting is saved.
Set the date and time
English
Configure your phone
(country dependent)
Tip
•• To set the date and time later, press
[Back] to skip this setting.
1 Select [Menu] > [Phone setup] >
[Date & time], then press [OK]
to confirm.
2 Press the numeric buttons to
enter the date, then press [OK]
to confirm.
»»The time setting menu is
displayed on the handset.
3 Press the numeric buttons to enter
the time.
Note
•• If the time is in 12-hour format, press
/ to select [AM] or [PM].
4 Press [OK] to confirm.
EN
11
Change the remote
access PIN code
Note
•• The default answering machine
remote access PIN code is 0000 and
it is important to change it to ensure
the security.
1 Select [Menu] > [Answ. Machine]
> [Remote access] > [Change
PIN], then press [OK] to confirm.
2 Enter the old PIN, then press [OK]
to confirm.
3 Enter the new PIN code, then
press [OK] to confirm.
4 Enter the new PIN code again,
then press [Save] to confirm.
»»The setting is saved.
12
EN
Charge the handset
Place the handset on the base station
to charge the handset. When the
handset is placed correctly on the
base station, you hear a docking sound.
»»The handset starts charging.
Note
•• Charge the batteries for 8 hours
before first use.
•• If the handset becomes warm when
the batteries are being charged, it is
normal.
You can activate or deactivate the
docking tone (see 'Set the docking
tone' on page 27) .
Your phone is now ready to use.
What is standby mode?
Your phone is in standby mode when
it is idle. The standby screen displays
the handset name, handset number,
date and time.
Check the signal
strength
The battery icon displays the current
battery level.
When the handset is off the
base station/charger, the bars
indicate the battery level (full,
medium and low).
When the handset is on the
base station/charger, the bars
flash until charging is complete.
The empty battery icon flashes.
The battery is low and needs
recharging.
The number of bars indicates
the link status between the
handset and base station. The
more bars are shown, the better
the connection is.
• Make sure the handset is linked to
the base station before you make
or receive calls and carry out the
functions and features.
• If you hear warning tones when
you are on the phone, the handset
is almost out of battery or the
handset is out of range. Charge
the battery or move the handset
closer to the base station.
The handset turns off if the batteries
are empty. If you are on the phone,
you hear warning tones when the
batteries are almost empty. The call
gets disconnected after the warning.
EN
13
English
Check the battery level
4 Calls
Note
•• When the power fails, the phone
cannot access emergency services.
When the power fails, the phone
cannot access emergency services.
Tip
•• Check the signal strength before you
make a call or when you are in a call
(see ‘Check the signal strength’ on
page 11).
Make a call
You can make a call in these ways:
• Quick call
• Quick call through the direct keys
• Dial before you call
• Redial the most recent number
• Call from the redial list.
• Call from the phonebook list
• Call from the call log
Quick call
1 Press or .
2 Dial the phone number.
»»The number is dialed out.
»»The duration of your current
call is displayed.
14
EN
Call through the direct key
To make a quick call from the record
pre-saved in the direct key, press
or
, then press M1, M2 or M3.
»»The number is dialed out.
Tip
•• For information of how to set the
direct keys, see the next section.
Set the direct keys
1 Enter the number, the press and
hold M1, M2 or M3.
2 Enter the name, then press [OK]
to confirm.
3 Edit the number if necessary, then
press [Save] to confirm.
»»The direct key is set.
Note
•• If there is already a record saved in
the direct key, you need to confirm
whether you want to replace the old
record with the new one.
Dial before you call
1 Dial the phone number
• To erase a digit, press [Clear].
• To enter a pause, press and
hold .
or
2 Press
to dial out the call.
You can make a call from the redial list
(see 'Redial a call' on page 26).
Redial the most recent number
1 Press [Redial].
»»The redial list is displayed and
the most recent number is
highlighted.
2 Press
.
»»The most recent number is
then dialed out.
Call from the phonebook
You can make a call from the
phonebook list (see 'Call from the
phonebook' on page 21).
Call from the call log
You can return a call from the
received or missed call log (see
'Return a call' on page 25).
Note
•• The call timer displays the talk time of
your current call.
Note
•• If you hear warning tones, the handset
is almost out of battery or the
handset is out of range. Charge the
battery or move the handset nearer
to the base station.
End a call
You can end a call in these ways:
• Press
; or
• Place the handset to the base
station or charging cradle.
Answer a call
When there is an incoming call, the
phone rings and the LCD backlight
flashes. Press
or
to answer the
call.
Warning
•• When the handset rings or when
the handsfree is activated, keep the
handset away from your ear to avoid
ear damage.
Note
•• The caller ID service is available if
you have registered to the caller ID
service with your service provider.
Tip
•• When there is a missed call, a
notification message appears.
Turn off the ringer for an
incoming call
When the phone rings, press [Silent].
EN
15
English
Call from the redial list
Adjust the earpiece/
speaker volume
Press / to adjust the volume
during a call.
»»The earpiece/speaker volume
is adjusted and the phone is
back to the call screen.
Mute the microphone
1 Press
during a call.
»»The handset displays [Mute on].
»»The caller cannot hear you, but
you can still hear his voice.
2 Press again to unmute the
microphone.
»»You can now communicate
with the caller.
Turn the speaker on or
off
Press
16
.
EN
Make a second call
Note
•• This service is network dependent.
1 Press
during a call.
»»The first call is put on hold.
2 Dial the second number.
»»The number displayed on the
screen is dialed out.
Answer a second call
Note
•• This service is network dependent.
When there is a periodical beep to
notify you of an incoming call, you can
answer the call in these ways:
1 Press and to answer the call.
»»The first call is put on hold,
and you are now connected to
the second call.
2 Press
and to end the current
call and answer the first call.
English
Switch between two
calls
You can switch your calls in these ways:
• Press
and ; or
• Press [Option] and select [Switch
calls], then press [OK] again to
confirm.
»»The current call is put on hold,
and you are now connected to
the other call.
Make a conference call
with external callers
Note
•• This service is network dependent.
Check with the service provider for
additional charges.
When you are connected to two calls,
you can make a conference call in
these ways:
• Press , then ; or
• Press [Option], select
[Conference] and then press
[OK] again to confirm.
»»The two calls are combined
and a conference call is
established.
EN
17
5 Intercom and
conference
calls
An intercom call is a call to another
handset that shares the same base
station. A conference call involves a
conversation between you, another
handset user and the outside callers.
Make a call to another
handset
Note
•• If the base station only has 2
registered handsets, press and hold
to make a call to another handset.
1 Press and hold
.
»»The handsets available for
intercom are displayed.
2 Select a handset number, then
press [OK] to confirm.
»»The selected handset rings.
3 Press
on the selected handset.
»»The intercom is established.
4 Press [Cancel] or
to cancel or
end the intercom call.
Note
•• If the selected handset is busy, [Busy]
is displayed on the handset screen.
18
EN
While you are on the phone
You can go from one handset to
another during a call:
1 Press and hold .
»»The current caller is put on
hold.
2 Select a handset number, then
press [OK] to confirm.
»»Wait for the other side to
answer your call.
Switch between calls
Press [Extern] to switch between the
internal and external call.
Transfer a call
1 Press and hold
during a call.
»»The handsets available for
intercom are displayed.
2 Select a handset number, then
press [OK] to confirm.
when the other side
answers your call.
»»The call is now transferred to
the selected handset.
3 Press
Make a conference call
A 3-way conference call is between
you, another handset user and
the outside callers. It requires two
handsets to share the same base
station.
During the conference call
1 Press and hold
• Press [Int.] to put the external
to initiate an
internal call.
»»The handsets available for
intercom are displayed.
»»The external caller is put on
hold.
2 Select or enter a handset number,
then press [OK] to confirm.
»»The selected handset rings.
3 Press
on the selected handset.
»»The intercom is established.
call on hold and go back to the
internal call.
»»The external call is put on hold.
• Press [Conf] to establish the
conference call again.
Note
•• If a handset hangs up during the
conference call, the other handset
remains connected to the external call.
4 Press [Conf].
»»You are now in a 3-way
conference call with an
external call and a selected
handset.
5 Press
call.
to end the conference
Note
•• Press
to join an ongoing
conference with another handset if
[Services] > [Conference] is set to
[Auto].
EN
19
English
During an external call
6 Text and
numbers
You can enter text and numbers for
handset name, phonebook records,
and other menu items.
Enter text and numbers
1 Press once or several times on
the alphanumeric key to enter the
selected character.
2 Press [Clear] to delete the character.
3 Press to add a space.
Tip
•• For further information on the text
and number input, see the chapter
‘Appendix’.
Switch between
uppercase and
lowercase
By default, the first letter of each word
in a sentence is uppercase and the
rest is lowercase. Press and hold to
switch between the uppercase and
lowercase letters.
20
EN
This phone has a phonebook that
stores up to 100 records. You can
access the phonebook from the
handset. Each record can have a
name up to 14 characters long and a
number up to 24 digits long.
There are 2 direct access memories
(keys and ). Depending on your
country, keys and are preset
to the voice mail number and
information service number of your
service provider respectively. When
you press and hold on the key in
standby mode , the saved phone
number is dialed automatically.
View the phonebook
Note
•• You can view the phonebook on one
handset only each time.
1 Press
or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Press / to scroll through the
phonebook entries.
Search a record
English
7 Phonebook
You can search the phonebook
records in these ways:
• Scroll the contact list.
• Enter the first character of the
contact.
Scroll the contact list
1 Press
or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Press / to scroll through the
phonebook list.
Enter the first character of a
contact
1 Press
or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Press the alphanumerical key that
matches the character.
»»The first record that starts
with this character is displayed.
Call from the
phonebook
1 Press
or select [Menu] >
[Phonebook] > [View] > [OK] to
access the phonebook list.
2 Select a contact in the phonebook
list.
3 Press to make the call.
EN
21
Access the phonebook
during a call
1 Press [Option] and select
Tip
•• Press [Clear] to delete the character.
Press / to move the cursor left
and right.
[Phonebook].
2 Press [OK] to confirm.
3 Select a contact, then press [OK]
to confirm.
»»The number is displayed.
Edit a record
1 Select [Menu] > [Phonebook] >
[Edit], then press [OK] to confirm.
Add a record
Note
•• If your phonebook memory is full, the
handset displays a notification message.
Delete some records to add new ones.
1 Select [Menu] > [Phonebook] >
[Add new], then press [OK] to
confirm.
2 Enter the name, then press [OK]
to confirm.
3 Enter the number, then press
[Save] to confirm
»»Your new record is saved.
Tip
•• Press and hold
to insert a pause.
Note
•• The phonebook overwrites the old
number with the new number.
22
EN
2 Edit the name, then press [OK] to
confirm.
3 Edit the number, then press [Save]
to confirm.
»»The record is saved.
Delete a record
1 Select [Menu] > [Phonebook] >
[Delete].
2 Select a contact, then press [OK]
to confirm.
»»The handset displays a
confirmation request.
3 Press [OK] to confirm.
English
Delete all records
1 Select [Menu] > [Phonebook] >
[Delete all], then press [OK] to
confirm.
»»The handset displays a
confirmation request.
2 Press [OK] to confirm.
»»All records are deleted.
Direct keys
The phone features 3 direct keys to
store the emergency phone numbers
or numbers you call frequently.
Set the direct keys
1 Enter the number, then press and
hold M1, M2 or M3.
2 Enter the name, then press [OK]
to confirm.
3 Edit the number if necessary, then
press [Save] to confirm.
»»The direct key is set.
Note
•• If there is already a record saved in
the direct key, you need to confirm
whether you want to replace the old
record with the new one.
EN
23
8 Call log
The call log stores the call history
of all missed or received calls. The
incoming call history includes the
name and number of the caller, call
time and date. This feature is available
if you have registered to the caller ID
service with your service provider.
Your phone can store up to 50 call
records. The call log icon on the
handset flashes to remind you of any
unanswered calls. If the caller allows
the display of his identity, you can view
his name or number. The call records
are displayed in chronological order
with the most recent received call at
the top of the list.
Note
•• Make sure the number in the call list is
valid before you can call back directly
from the call list.
The icons shown on the screen tell
you whether they are missed/received
calls.
Icons
Description
It remains steadily on when
browsing incoming calls in the
call log.
It flashes when there is a new
missed call or when browsing
new missed calls.
It remains steadily on when
the missed calls in the call log
are read.
Call list type
You can view all incoming calls or
missed calls from this menu.
Select the call list type
1 Select [Menu] > [Services] >
[Call list type], then press [OK]
to confirm.
2 Select an option, then press [OK]
to confirm.
»»The setting is saved.
24
EN
Delete a call record
1 Press
1 Press
2 Select a record, then press
2 Select a record, then press
Save a call record to
the phonebook
4 Press [OK] to confirm.
.
»»The incoming call log is
displayed.
[Option] > [View] to view the
available information.
1 Press
.
»»The incoming call log is
displayed.
2 Select a record, then press
[Option].
3 Select [Save number], then press
[OK] to confirm.
4 Enter and edit the name, then
press [OK] to confirm.
5 Enter and edit the number, then
press [Save] to confirm.
»»The record is saved.
Return a call
English
View the call records
.
»»The incoming call log is
displayed.
[Option] to confirm.
3 Select [Delete], then press [OK]
to confirm
»»The handset displays a
confirmation requests.
»»The record is deleted.
Delete all call records
1 Press
.
»»The incoming call log is
displayed.
2 Press [Option].
3 Select [Delete all], then press
[OK] to confirm.
»»The handset displays a
confirmation request.
4 Press [OK] to confirm.
»»All records are deleted.
1 Press .
2 Select a record on the list.
3 Press to make the call.
EN
25
9 Redial list
The redial list stores the call history
of dialed calls. It includes the names
and/or numbers you have called.
This phone can store up to 20 redial
records.
View the redial records
1 Press [Redial].
»»The dialed calls list is displayed.
Delete a redial record
1 Press [Redial] to enter the list of
dialed calls.
2 Select a record, then press
[Option] to confirm.
3 Select [Delete], then press [OK]
to confirm.
»»The handset displays a
confirmation request.
4 Press [OK] to confirm.
»»The record is deleted.
Redial a call
Delete all redial records
1 Press [Redial].
2 Select the record you want to call.
1 Press [Redial] to enter the list of
Press .
»»The number is dialed out.
Save a redial record to
the phonebook
1 Press [Redial] to enter the list of
dialed calls.
2 Select a record, then press
[Option] to confirm.
3 Select [Save number], then press
[OK] to confirm.
4 Enter and edit the name, then
press [OK] to confirm.
5 Enter and edit the number, then
press [Save] to confirm.
»»The record is saved.
26
EN
dialed calls.
2 Select [Option] > [Delete all],
then press [OK] to confirm.
»»The handset displays a
confirmation request.
3 Press [OK] to confirm.
»»All records are deleted.
You can customize the settings to
make it your own phone.
Sound settings
Set the handset's ringtone
volume
You can select among 5 ringtone
volume levels or [Off].
1 Select [Menu] > [Phone setup] >
[Sounds] > [Ring volume], then
press [OK] to confirm.
2 Select a volume level, then press
[OK] to confirm.
»»The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1 Select [Menu] > [Phone setup]
> [Sounds] > [Ring tones], then
press [OK] to confirm.
2 Select a ringtone, then press [OK]
to confirm.
»»The setting is saved.
Set the key tone
Key tone is the sound made when you
press a key on the handset.
1 Select [Menu] > [Phone setup] >
[Sounds] > [Key tone], then press
[OK] to confirm.
2 Select [On]/[Off], then press [OK]
to confirm.
»»The setting is saved.
Set the docking tone
Docking tone is the sound made
when you place the handset on the
base station or charger.
1 Select [Menu] > [Phone setup] >
[Sounds] > [Docking tone], then
press [OK] to confirm.
2 Select [On]/[Off], then press [OK]
to confirm.
»»The setting is saved.
Set the hearing aid compatibility
You can use the phone with a hearing
aid device.
1 Select [Menu] > [Phone setup]
> [Sounds] >[Hearing aid], then
press [OK] to confirm.
2 Select [On]/[Off], then press [OK]
to confirm.
»»The setting is saved.
EN
27
English
10 Phone
settings
ECO mode
The ECO mode reduces the
transmission power of the handset
and base station when you are on a
call or when the phone is in standby
mode.
1 Select [Menu] > [Phone setup] >
[Eco mode], then press [OK] to
confirm.
2 Select [On]/[Off], and press [OK]
to confirm.
»»The setting is saved.
»» is displayed in standby mode.
Note
•• When the ECO mode is set to [On],
the connection range between the
handset and the base station can be
reduced.
Set the backlight of the
LCD screen
You can set the backlight of the LCD
screen and keypad flashing on or off
when the phone rings.
1 Select [Menu] > [Phone setup] >
[Visual alert], then press [OK] to
confirm.
2 Select [Flashing on]/[Flashing off],
then press [OK] to confirm.
»»The setting is saved.
Set the date and time
For information, see 'Set the date and
time' in the Get started section.
Set the display language
Note
Name the handset
The name of the handset can be up
to 14 characters. It is displayed on the
handset screen in standby mode.
1 Select [Menu] > [Phone setup] >
[Phone name], then press [OK]
to confirm.
2 Enter or edit the name. To erase a
character, select [Clear].
3 Press [OK] to confirm.
»»The setting is saved.
28
EN
•• This feature only applies to models
with multiple-language support.
•• Languages available vary from country
to country.
1 Select [Menu] > [Phone setup]
> [Language], then press [OK] to
confirm.
2 Select a language, then press [OK]
to confirm.
»»The setting is saved.
English
11 Alarm clock
Your phone has a built-in alarm clock.
Check the information below to set
your alarm clock.
Set the alarm
1 Select [Menu] > [Alarm], then
press [OK] to confirm.
2 Select [On once] or [On daily],
then press [OK] to confirm.
3 Enter an alarm time, then press
[OK] to confirm.
»»The alarm is set and is
displayed on the screen.
Tip
•• Press /
/ [PM].
to switch between [AM]
Turn off the alarm
When the alarm rings
Press any key to turn off the alarm.
Before the alarm rings
Select [Menu] > [Alarm] > [Off],
then press [OK] to confirm.
»»The setting is saved.
EN
29
12 Services
The phone supports a number of
features that help you handle and
manage the calls.
Call list type
You can view all incoming calls or
missed calls from this menu.
Select the call list type
1 Select [Menu] > [Services] >
[Call list type], then press [OK]
to confirm.
2 Select an option, then press [OK]
to confirm.
»»The setting is saved.
Auto conference
To join an external call with another
handset, press
.
Activate/Deactivate auto
conference
1 Select [Menu] > [Services] >
[Conference], then press [OK] to
confirm.
2 Select [Auto]/[Off], then press
[OK] to confirm.
»»The setting is saved.
30
EN
Network type
Note
•• This feature only applies to models
with network type support.
1 Select [Menu] > [Services] >
[Network type], then press [OK].
2 Select a network type, then press
[OK].
»»The setting is saved.
Auto prefix
This feature checks and formats
your outgoing call number before it
is dialed out. The prefix number can
replace the detect number you set
in the menu. For example, you set
604 as the detect number and 1250
as the prefix. When you have dialed
out a number such as 6043338888,
your phone changes the number to
12503338888 when it dials out.
Note
•• The maximum length of a detect
number is 5 digits. The maximum
length of an auto prefix number is
10 digits.
1 Select [Menu] > [Services] >
[Auto prefix], then press [OK] to
confirm.
2 Enter the detect number, then
press [OK] to confirm.
3 Enter the prefix number, then
press [OK] to confirm.
»»The setting is saved.
Note
•• To enter a pause, press and hold .
Note
•• If the prefix number is set and the
detect number is left empty, the prefix
number is added to all outgoing calls.
Note
•• The feature is unavailable if the dialed
number starts with * and #.
Select the recall
duration
English
Set auto prefix
Make sure that the recall time is set
correctly before you can answer
a second call. In normal case, the
phone is already preset for the recall
duration. You can select among 3
options: [Short], [Medium] and [Long].
The number of available options varies
with different countries. For details,
consult your service provider.
1 Select [Menu] > [Services] >
[Recall time], then press [OK] to
confirm.
2 Select an option, then press [OK]
to confirm.
»»The setting is saved.
Dial mode
Note
•• This feature only applies to models
that support both tone and pulse dial.
Dial mode is the telephone signal used
in your country. The phone supports
tone (DTMF) and pulse (rotary)
dial. Consult the service provider for
detailed information.
EN
31
Set the dial mode
1 Select [Menu] > [Services] >
[Dial mode], then press [OK] to
confirm.
2 Select a dial mode, then press
[OK] to confirm.
»»The setting is saved.
Note
•• If your phone is in pulse dial mode,
press during a call for temporary
tone mode. Digits entered for this call
are then sent out as tone signals.
Register the handsets
You can register additional handsets to
the base station. The base station can
register up to 4 handsets.
1 Select [Menu] > [Services] >
[Register], then press [OK] to
confirm.
2 Press and hold on the base
station for 5 seconds.
Note
•• For models with an answering machine,
you hear a confirmation beep.
3 Press [OK] to confirm.
4 Enter the system PIN. Press
[Clear] to make corrections.
5 Press [OK] to confirm the PIN.
»»Registration is completed in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
Note
•• If the PIN is incorrect or no base
is found within a certain period,
your handset displays a notification
message. Repeat the above procedure
if registration fails.
Note
•• The preset PIN is 0000. No change
can be made on it.
32
EN
English
Unregister the handsets
1 If two handsets share the same
base station, you can unregister a
handset with another handset.
2 Select [Menu] > [Services] >
[Unregistered], then press [OK]
to confirm.
3 Enter the system PIN. Press
[Clear] to make corrections.
4 Select the handset name to be
unregistered.
5 Press [OK] to confirm.
»»The handset is unregistered.
Tip
•• The handset number displays beside
the handset name in standby mode.
Restore default settings
You can reset your phone settings to
the original factory settings.
1 Select [Menu] > [Services] >
[Reset], then press [OK] to
confirm.
»»The handset displays a
confirmation request.
2 Press [OK] to confirm.
»»All settings are reset.
EN
33
13 Network
services
The network services are network
and country dependent. Contact your
service provider for more information.
Note
•• For the network services to work
properly, Make sure that the activation
and/or deactivation codes are
correctly entered.
Call forward
You can divert your calls to another
phone number. You can select among
3 options:
• [Call forward]: divert all incoming
calls to another number.
• [Call fwd busy]: divert calls when
the line is busy.
• [Call fwd unans]: divert calls when
no one answers.
Activate/Deactivate call forward
1 Select [Menu] > [Netw.services]
> [Call forward]/[Call fwd
busy]/[Call fwd unans]
2 Select [Activate]/[Deactivate],
then press [OK] to confirm.
3 Enter the telephone number, then
press [OK] to confirm.
»»The setting is saved .
34
EN
Edit the activation/deactivation
code
You can edit the prefix and suffix to
the call forward codes.
1 Select [Menu] > [Netw.services]
> [Call forward]/[Call fwd
busy]/[Call fwd unans], then press
[OK] to confirm.
2 Select[Change code] , then press
[OK].
3 Then you can either
• Select [Activate] >
[Prefix]/[Suffix], then press
[OK] to confirm; or
• Select [Deactivate], then press
[OK] to confirm.
4 Enter or edit the code, then press
[OK] to confirm.
»»The setting is saved.
Call return
You can check the most recent
unanswered call.
Call the return service centre
Select [Menu] > [Netw.services]
> [Call return] > [Call], then press
[OK] to confirm.
»»Your call is made to the service
centre.
Hide your identity
1 Select [Menu] > [Netw.services]
You can hide your identity from the
caller.
> [Call return] > [Settings], then
press [OK] to confirm.
2 Enter or edit the number, then
press [OK] to confirm.
»»The setting is saved.
Call back service
The call back service notifies you
when a party you have tried to call
becomes available. You can select to
cancel this service from the menu
after you have activated it from the
service provider.
Cancel the call back service
Select [Menu] > [Netw.services] >
[Cancel call bk] > [Call], then press
[OK] to confirm.
»»A call is made to the service
centre to cancel the call back
option.
English
Edit the call return service
centre number
Activate ID withheld
Select [Menu] > [Netw.services] >
[Withhold ID] > [Activate], then
press [OK] to confirm.
»»When you make a call to your
contact, your ID is withheld.
Edit the ID withheld code
1 Select [Menu] > [Netw.services]
> [Withhold ID] > [Settings],
then press [OK] to confirm.
2 Enter or edit the number, then
press [OK] to confirm.
»»The setting is saved.
Edit the cancel call back service
number
1 Select [Menu] > [Netw.services]
> [Cancel call bk] > [Settings],
then press [OK] to confirm.
2 Enter or edit the number, then
press [OK] to confirm.
»»The setting is saved.
EN
35
14 Telephone
answering
machine
Note
•• Available only for XL395.
Your phone includes a telephone
answering machine that records
unanswered calls when it is on. By
default, the answering machine is set
to the [Record also] mode. You can
also access the answering machine
remotely and change the settings
through the answering machine menu
on the handset.
The LED indicator on the base station
lights up when the answer machine
is on.
Turn the answering
machine on or off
You can turn the answering machine
on or off through the base station or
the handset.
36
EN
Through the handset
1 Select [Menu] > [Answ. Machine]
> [Voice answer], then press
[OK] to confirm.
2 Select [Answer only]/[Record
also]/[Off], then press [OK] to
confirm.
»»The setting is saved.
Through the base
Press to turn the answering
machine on or off in standby mode.
Note
•• When the answering machine is
switched on, it answers incoming calls
after a certain number of rings based
on the ring delay setting.
Note
•• This feature only applies to models
with multiple-language support.
The answering machine language is
the language for the announcements.
1 Select [Menu] > [Answ. Machine]
> [Voice language], then press
[OK] to confirm.
2 Select a language, then press [OK]
to confirm.
»»The setting is saved.
Announcements
The announcement is the message
your caller hears when the answering
machine picks up the call. The
answering machine has 2 default
announcements: the [Record also]
mode and [Answer only] mode.
Record an announcement
The maximum length of the
announcement you can record
is 3 minutes. The newly recorded
announcement automatically replaces
the old one.
1 Select [Menu] > [Answ. Machine]
> [Announcement], then press
[OK] to confirm.
2 Select [Record also] or [Answer
only], then press [OK] to confirm.
3 Select [Record], then press [OK]
to confirm.
4 Recording starts after the beep.
5 Press [OK] to stop recording
or the recording stops after 3
minutes.
»»You can listen to the newly
recorded announcement on
the handset.
Note
•• To restore the default announcement,
delete your current announcement.
•• Make sure that you speak close to
the microphone when you record an
announcement.
EN
37
English
Set the answering
machine language
Listen to the announcement
1 Select [Menu] > [Answ. Machine]
> [Announcement], then press
[OK] to confirm.
2 Select [Record also] or [Answer
only], then press [OK] to confirm.
3 Select [Play], then press [OK] to
confirm.
»»You can listen to the current
announcement.
Note
•• You can no longer listen to the
announcement when you pick up an
incoming call.
Restore the default
announcement
1 Select [Menu] > [Answ. Machine]
> [Announcement], then press
[OK] to confirm.
2 Select [Record also] or [Answer
only], then press [OK] to confirm.
3 Select [Set default], th en press
[OK] to confirm.
»»The handset displays a
confirmation request.
4 Press [OK] to confirm.
»»The default announcement is
restored.
Note
•• The default announcement cannot
be deleted.
38
EN
Each message can be up to 3 minutes
long. When you receive new messages,
the new message indicator flashes
on the answering machine and the
handset displays a notification message.
Note
•• If you pick up the phone when the
caller leaves a message, the recording
stops and you can talk to the caller
directly.
Note
•• If the memory is full, the answering
machine switches to [Answer only]
automatically. Delete old messages to
receive new ones.
Listen to the incoming messages
You can listen to the incoming
messages in the sequence they are
recorded.
From the base
• To start/Stop listening, press .
• To adjust the volume, press / .
• To play the previous message/
replay the current message, press
.
• To play the next message, press .
• To delete the current message,
press .
Note
•• No deleted messages can be
recovered.
From the handset
Select [Menu] > [Answ. Machine] >
[Play], then press [OK] to confirm.
»»New messages start playing.
Old messages start playing if
there is no new message.
• Press [Back] to stop listening.
• Press [Option] to enter the
options menu.
• Press / to increase/decrease
the volume.
EN
39
English
Incoming messages
(ICM)
Delete an incoming message
Set the ring delay
From the base
Press when you listen to the
message.
»»The current message is deleted.
From the handset
1 When you listen to the message,
press [Option] to enter the
options menu.
2 Select [Delete], then press [OK]
to confirm.
»»The current message is
deleted.
You can set the number of times the
phone rings before the call goes to
the answering machine.
1 Select [Menu] > [Answ. Machine]
> [Ring delay], then press [OK]
to confirm.
2 Select a new setting, then press
[OK] to confirm.
»»The setting is saved.
Delete all old incoming messages
From the base
Press and hold in standby mode.
»»All old messages are
permanently deleted.
From the handset
1 Select [Menu] > [Answ. Machine]
> [Delete all], then press [OK] to
confirm.
»»The handset displays a
confirmation request.
2 Press [OK] to confirm.
»»All old messages are
permanently deleted.
Note
•• You can only delete the read
messages. No deleted messages can
be recovered.
40
EN
Note
•• Make sure that the answering machine
is switched on before this feature can
be applied.
Tip
•• When you access the answering
machine remotely, you are
recommended to set the ring
delay to[Toll saver] mode. This is a
cost effective way to manage your
messages. When there are new
messages, the answering machine
picks up the call after 3 rings; When
there is no messages, it picks up the
call after 5 rings.
Activate/deactivate the remote
access
You can operate your answering
machine when you are away from
home. Simply make a call to your
phone with a touch tone phone and
enter your 4-digit PIN code.
You can allow or block remote access
to the answering machine.
1 Select [Menu] > [Answ. Machine]
> [Remote access], then press
[OK] to confirm.
2 Select [Activate]/[Deactivate],
then press [OK] to confirm.
»»The setting is saved.
Note
•• The remote access PIN code is the
same as your system PIN. The preset
PIN is 0000.
Change the PIN code
1 Select [Menu] > [Answ. Machine]
> [Remote access] > [Change
PIN], then press [OK] to confirm.
2 Enter the old PIN, then press [OK]
to confirm.
3 Enter the new PIN code, then
press [OK] to confirm.
4 Enter the new PIN code again,
then press [Save] to confirm.
»»The setting is saved.
EN
41
English
Remote access
Access the answering machine
remotely
1 Make a call to your home number
with a touch tone phone.
2 Enter # when you hear the
announcement.
3 Enter your PIN code.
»»You now have access to your
answering machine, and you
can listen to the new messages.
Note
•• You have 2 chances to enter the
correct PIN code, before your phone
hangs up.
4 Press a key to carry out a
function. See the 'Remote access
commands' in the following table
for a list of available functions.
Note
•• When there is no message, the phone
hangs up automatically if no key is
pressed for 8 seconds.
42
EN
Remote access commands
Key
1
2
3
6
7
8
9
Function
Repeat the current or listen to
the previous message.
Listen to messages.
Skip to the next message.
Delete the current message.
Switch the answering machine
on.
(not available when you listen
to the messages).
Stop listening to the message.
Switch the answering machine
off.
(not available when you listen
to the messages).
Display
• Amber LCD backlight
General telephone features
• Dual mode caller name & number
identification
• Conference call and voicemails
• Intercom
• Maximum talk time: 20 hours
Phonebook list, Redial list, Call log
and Memory keys
• Phonebook list with 100 entries
• Redial list with 20 entries
• Call log with 50 entries
• Memory keys with 3 entries
Battery
• HFR: 2 x AAA Ni-MH 1.2V
650mAh rechargeable batteries
• SANIK: 2 x AAA Ni-MH 1.2V
650mAh rechargeable batteries
Adapter
Base and charger
• Philips, S003PB0600050, input:
100-240Vac, 50-60Hz 0.2A, output
6V 500mA
• Philips, SSW-1920-UK-2, input:
100-240Vac, 50-60Hz 0.2A, output:
6V 500mA
Power consumption
• Power consumption at standby
mode: around 0.60W (XL390);
0.65W (XL395)
Weight and dimensions (XL390)
• Handset: 159 grams
• 182.91 x 53.62 x 34.84 mm (H x
W x D)
• Base: 138 grams
• 89.2 x 140.13 x 87.86 mm (H x
W x D)
• Charger: 84 grams
• 89.92 x 94.96 x 89.39 mm (H x
W x D)
Weight and dimensions (XL395)
• Handset: 159 grams
• 182.91 x 53.62 x 34.84 mm (H x
W x D)
• Base: 161 grams
• 89.2 x 140.13 x 87.86 mm (H x
W x D)
• Charger: 84 grams
• 89.92 x 94.96 x 89.39 mm (H x
W x D)
EN
43
English
15 Technical data
16 Notice
Declaration of
conformity
Hereby, WOOX Innovations declares
that this product is in compliance
with the essential requirements
and other relevant provisions of
Directive 1999/5/EC. You can find the
Declaration of Conformity on www.
p4c.philips.com.
This product has been designed,
tested and manufactured according
the European R&TTE directive
1999/5/EC.
Use GAP standard
compliance
The GAP standard guarantees that
all DECT™ GAP handsets and base
stations comply with a minimum
operating standard irrespective of
their make. The handset and base
station are GAP compliant, which
means they guarantee the minimum
functions: register a handset, take
the line, make a call and receive a
call. The advanced features may not
be available if you use them with
other makes. To register and use
this handset with a GAP compliant
base station of different make, first
follow the procedure described in
the manufacturer's instructions, then
follow the procedure described in
this manual for registering a handset.
44
EN
To register a handset from different
make to the base station, put the base
station in registration mode, then
follow the procedure described in the
handset manufacturer's instructions.
Compliance with EMF
This product complies with all
applicable standards and regulations
regarding exposure to electromagnetic
fi elds.
Disposal of your old
product and batteries
Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product it
means that the product is covered by
the European Directive 2002/96/EC.
Please inform yourself about the
local separate collection system for
electrical and electronic products.
Please act according to your local
rules and do not dispose of your old
products with your normal household
waste.
English
Correct disposal of your old product
helps to prevent potential negative
consequences for the environment
and human health.
Your product contains batteries
covered by the European Directive
2006/66/EC, which cannot be disposed
with normal household waste.
Please inform yourself about the
local rules on separate collection
of batteries because correct
disposal helps to prevent negative
consequences for the environmental
and human health.
When this logo is attached to
a product, it means a financial
contribution has been paid to the
associated national recovery and
recycling system.
Environmental information
All unnecessary packaging has been
omitted. We have tried to make the
packaging easy to separate into three
materials: cardboard (box), polystyrene
foam (buffer) and polyethylene (bags,
protective foam sheet.)
Your system consists of materials
which can be recycled and reused if
disassembled by a specialized company.
Please observe the local regulations
regarding the disposal of packaging
materials, exhausted batteries and old
equipment.
EN
45
17 Frequently
asked
questions
No signal bar is displayed on the
screen.
•• The handset is out of range. Move
it closer to the base station.
•• If the handset displays
[Unregister], register your handset.
Tip
•• For further information, see chapter
‘Service’, section ‘Register the handsets’.
I have chosen a wrong language
which I cannot read, what do I do?
1 Press to go back to the standby
screen.
2 Press to access the main menu
screen.
3 One of the following options will
appear on the screen:
[Phone setup] > [Language]
[Réglages] > [Langue]
[Telefon-Setup] > [Sprache]
[Config. telef.] > [Lingua]
4 Select it to access the language
options.
5 Select your own language.
46
EN
If I fail to register the additional
handsets to the base station, what
do I do?
Your base memory is full. Unregister
the unused handsets and try again.
No dialing tone
•• Check your phone connections.
•• The handset is out of range. Move
it closer to the base station.
No docking tone
•• The handset is not placed properly
on the base station/charger.
•• The charging contacts are dirty.
Disconnect the power supply
first and clean the contacts with a
damp cloth.
I cannot change the settings of my
voice mail, what do I do?
The voice mail service is managed
by your service provider but not the
phone itself. Contact your service
provider to change the settings.
The handset on the charger does not
charge.
•• Make sure the batteries are
inserted correctly.
•• Make sure the handset is placed
properly on the charger. The
battery icon animates when
charging.
•• Make sure the docking tone setting
is turned on. When the handset
is placed correctly on the charger,
you can hear a docking tone.
•• The charging contacts are dirty.
Disconnect the power supply
first and clean the contacts with a
damp cloth.
•• Batteries are defective. Purchase
new ones from your dealer.
English
No display
•• Make sure the batteries are charged.
•• Make sure there is power and the
phone is connected.
Bad audio (crackles, echo, etc.)
•• The handset is nearly out of range.
Move it closer to the base station.
•• The phone receives interference
from the nearby electrical
appliances. Move the base station
away from them.
•• The phone is at a location with
thick walls. Move the base away
from them.
The handset does not ring.
Make sure the handset ringtone is
turned on.
The caller ID does not display.
•• The service is not activated. Check
with your service provider.
•• The caller's information is withheld
or unavailable.
The handset loses connection with
the base or the sound is distorted
during a call.
Check if the ECO mode is activated.
Turn it off to increase the handset
range and enjoy the optimal call
conditions.
Note
•• If the above solutions do not help,
disconnect the power supply from
both the handset and base station. Try
again after 1 minute.
EN
47
18 Appendix
Text and number input
tables
Key
3
4
5
6
7
8
9
Upper case characters (for
English/French/ German/ Italian/
Turkish/Portuguese/Spanish/
Dutch/Danish/Finnish/Norwegian/
Swedish/ Romanian/Polish/Czech/
Hungarian/Slovakian/Slovenian/
Croatian/Lithuanian/Estonian/
Lativian/Bulgarian)
Space . 0 , / : ; " ' ! ¡ ? ¿ * + - %
\^ ~|
1@_#=<>()&€£$¥[
] { } ¤ § ...
ABC2ÀÂÆÁÃÄÅĄ
ĀÇČ
DEF3ÈÉÊËĖĘĒΔΦ
GHI4ĞÍÏĮĪİΓ
JKL5Λ
MNO6ÑÓÔÕÖ
PQRS7ŞŠΠΘΣ
T UV 8 Ù Ú Ü Ū Ų
W XY Z 9 Ø Ω Ξ Ψ Ž
48
EN
0
1
2
Key
0
1
2
3
4
5
6
7
8
9
Key
0
1
2
3
4
5
6
7
8
9
Lower case characters (for
English/French/ German/
Italian/Turkish/Portuguese/
Spanish/Dutch/Danish/Finnish/
Norwegian/ Swedish)
Space . 0 , / : ; " ' ! ¡ ? ¿ * + - %
\^~|
1@_#=<>()&€£$¥[
]{}¤§…
abc2àâæáãäåąāçč
def3èéêëėęēΔΦ
ghi4ğíìïįĪıΓ
jkl5Λ
mno6ñóôõöò
pqrs7βşšΠΘΣ
tuv8ùúüūųμ
wxyz9øΩΞΨž
Upper case characters (for
Greek)
Space . 0 , / : ; " ' ! ¡ ? ¿ * + - %
\^ ~|
1@_#=<>()&€£$¥[
] { } ¤ § ...
ABГ2ABCÆÅÇ
ΔΕΖ3DEFÉ
ΗΘΙ4GHI
ΚΛΜ5JKL
ΝΞΟ6MNOÑÖ
ΠΡΣ7PQRSß
Τ Υ Φ 8T UV Ü
Χ Ψ Ω 9 W XY Z Ø
0
1
2
3
4
5
6
7
8
9
Key
0
1
2
3
4
5
6
7
8
9
Lower case characters (for
Greek)
Space . 0 , / : ; " ' ! ¡ ? ¿ * + - %
\^~|
1@_#=<>()&€£$¥[
]{}¤§…
αβγ2abcàæäå
δεζ3defèé
ηθι4ghiì
κλμ5jklΛ
νξο6mnoñöò
πρσς7pqrsß
τυφ8tuvùü
χψω9wxyzø
Key
0
1
2
3
4
5
6
7
8
9
Lower case characters (for
Serbian)
Space . 0 , / : ; " ' ! ¡ ? ¿ * + - %
\^~|
1@_#=<>()&€£$¥[
]{}¤§…
abcЂĆČ2АБВГ
defЈĐ3ДЕЖЗ
ghiЉ4ИЙКЛ
jklЊ5МНОП
mnoЋ6РСТУ
Š7ФХЦЧΠΘ
pqrS
Σß
t u v ij 8 Ш Щ Ъ Ы
wxyZŽ9ЬЭЮЯΩΞΨ
Upper case characters (for
Serbian)
Space . 0 , / : ; " ' ! ¡ ? ¿ * + - %
\^ ~|
1@_#=<>()&€£$¥[
] { } ¤ § ...
ABCЂĆČ2АБВГ
DEFЈĐ3ДЕЖЗΔΦ
GHIЉ4ИЙКЛΓ
JKLЊ5МНОПΛ
MNOЋ6РСТУ
Š7ФХЦЧΠ
PQRS
ΘΣß
T UV 8 Ш Щ Ъ Ы
W XY Z Ž 9 Ь Э Ю Я Ω Ξ Ψ
EN
49
English
Key
19 Index
A
additional handsets
alarm
announcement
answer a call
answering machine
auto conference
auto prefix
G
GAP
32
29
37
15
36
30
30
B
base station
installation9
overview7
battery
10, 13, 43
C
call log
caller ID
calling
charging
conference
handset name
hearing aid compatibility
I
incoming messages
intercom calls
internal calls
date setting
default setting
delete messages
dial mode
display icons
disposal
E
ECO mode
F
find handsets/paging
EN
11
33
40
31
8
44
28
7
28
27
39
18
18
L
language setting
answering machine
37
handset28
listen to messages
39
M
missed calls
mute
N
network type
D
50
24
15, 24
14
12
17, 18, 30
H
44
O
on/off
24
16
30
36
English
P
phone
overview6
set up
10
phone settings
27
phonebook
21, 25, 26
PIN
answering machine
12, 41
handset12
power adapter
43
R
recall time
redial
register/unregister
remote access to answering
machine
ring delay
ringtone
31
26
32, 33
41
40
27
S
safety
3
save a number
25
signal strength
13
sounds
docking27
keytone27
standby mode
13
T
text entry
time setting
transfer call
troubleshooting/FAQ
two calls/call on hold
V
volume adjustment
20, 48
11
18
46
17
16
EN
51
2014 © WOOX Innovations Limited. All rights reserved.
Philips and the Philips’ Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used by WOOX
Innovations Limited under license from Koninklijke Philips N.V.
UM_XL390-395_05_EN_V3.0
WK14043
0168