Symbol Spectrum24 AP-3020, AP-3021 Access Point Quick Reference Guide
PDF
Tài liệu
Quảng cáo
Quảng cáo
www.symbol.com 73-20992-01 Revision A *73-20992-01* Symbol Technologies, Inc. One Symbol Place Holtsville, NY 11742-1300 This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No. 4,460,120; 4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900;5,321,246; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,068,190; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035 Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713 Patents Copyright © 2000 by Symbol Technologies, Inc. All rights reserved. No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Symbol Technologies, Inc. (Symbol). The material in this manual is subject to change without notice. Symbol reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies, Inc., intellectual property rights. An implied license only exists for equipment, circuits And subsystems contained in Symbol products. Symbol, the Symbol logo and Spectrum24 are registered trademarks of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged IBM is a registered trademark of International Business Machine Corporation. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Novell and LAN Workplace are registered trademarks of Novell Inc. Toshiba is a trademark of Toshiba Corporation. Quick Reference Guide Access Point AP-3020/AP-3021 Copyright Declaration of Conformity We, Symbol Technologies Inc. of One Symbol Plaza, Holtsville, NY 11742-1300, USA declare under our sole responsibility that the product Spectrum24, LA-302C, 2Mbps Type II Radio Card without microprocessor To which this product relates, is in conformity with the following standards and/or other normative documents. ETS 300 328 (November 1996) Radio; Wideband 2.4GHz Spread Spectrum ETS 300 826 (November 1997) EMC: 2.4GHz wideband transmission systems EN 60950: 1992 Incl Amdt 1-4, 11 - Safety of Information Technology Equipment We hereby declare that all essential radio test suites have been carried out and that the above named product is in conformity to all the essential requirements of Directive 1999/5/EC. The conformity assessment procedure referred to in Article 10(5) and detailed in Annex IV of Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies): BABT, Claremont House, 34 Molesey Road, Walton-on-Thames, KT12 4RQ Identification mark: 0168 The equipment also carries the Class 2 equipment identifier The technical documentation relevant to the above equipment can be made available for inspection on application to: Symbol Technologies EMEA, Symbol Place, Winnersh Triangle, Berkshire, RG 41 5TP, UK Dornu Narnor (name) Senior Director, Regulatory (title) (signature of authorised person) 7 September 2000 (date) Customer Support Regulatory Compliance Symbol RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. The majority of Symbol RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol Technologies could void the user’s authority to operate the equipment. Radio Frequency Interference Requirements This device has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. However, there is no guarantee that interference will not occur in a particular installation If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Re-orient or relocate the receiving antenna. Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that which the receiver connected. " "" Radio Frequency Interference Requirements - Canada Symbol Technologies is committed to providing its customers with world-class customer service and technical support. The Symbol Support Center operates as the single point of contact for any technical problem, question or support issue. The Support Center operates all year, 24 hours a day, staffed by full-time professional Technical Specialists. If Symbol cannot solve the problem immediately within its tiered, technical-support center, access to all technical disciplines within Symbol become available for further assistance and support. First response / contact within 24 hours or one business day. Responses by email, fax or telephone. North American Contacts Inside North America, contact Symbol at: Symbol Technologies, Inc. One Symbol Plaza, Holtsville, New York 11742-1300 Telephone: 1-516-738-2400/1-800-SCAN 234; Fax: 1-516-738-5990 Symbol Support Center: Telephone: 1-800-653-5350; Fax: (516) 563-5410; Email: [email protected] International Contacts Outside North America, contact Symbol at: Symbol Technologies Technical Support 12 Oaklands Park; Berkshire, RG41 2FD, United Kingdom Tel: 011-44-118-945-7000 or 1-516-738-2400 ext. 6213 This Class A digital apparatus meets the requirements of the Canadian InterferenceCausing Equipment Regulations. Cet appareil numérique de la Classe A respecte toutes les exigences du Reglement sur le Materiél Brouilleur du Canada. To comply with FCC and Industry Canada exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop or similar configurations must operate with a minimum separation of 20 cm from all persons. European Economic Area The European variant is intended for use throughout the European Economic Area, however authorization for use restricted as follows: " " " " European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400 - 2.4835 Ghz. France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz frequency range. Belgium outside, the equipment is to be restricted to the 2.460 - 2.4835 GHz frequency range. Operation in Italy requires a user license. Introduction 10Base-T UTP The Ethernet Access Point (AP) provides a bridge between Ethernet wired LANs and Spectrum24 wireless networks. It provides transparent access between Ethernet wired networks and radio-equipped mobile units (MUs). MUs include all of Symbol Spectrum24 terminals, scanners, third-party devices and other equipment. The AP provides 1 and 2 Mbps data transfer rates on the radio network. For further information on Access Point configuration, refer to the Spectrum24 Access Point AP-3020/AP-3021 Product Reference Guide from the Symbol Technologies Web page: http: www.symbol.com. Precaution " "" Before installing the AP verify the following: The location for the unit is dry and dust free. Install in wet or dusty areas only with additional protection. The environment has a temperature range between -20° C and 55° C If attaching to a wired Ethernet, keep AP on the same subnet. Use a 10Base-T connection for multiple APs or an AP attached to a wired UTP Ethernet hub. Normal 10Base-T limitations apply. 1. Plug the data cable RJ-45 connector into the AP RJ-45 connector. 2. Plug the other end of the data cable into the LAN access port (possibly a hub or wall connection). 3. Add additional APs as needed. LED Indicators The top-panel LED provide a status display indicating transmission, error conditions and other activity. The indicators are: Requirements The minimum installation requirements for a single-cell, peer-to-peer network are a power outlet and an antenna. Note: Use and test the radio network with an MU. The AP supports a 10Base-T unshielded twisted pair (UTP) standard. Power Options " " Standard power supply Part Number: 50-24000-006 -115/230VAC, 50/60Hz. US line cord Part Number: 23844-00-00 Remote power distribution system, Part Number: AP-PS-11 - See application note AP-PS-01 located on the Symbol Technologies Web page. Status One flash per second indicates normal operation. A steady on/off, or irregular flashing indicates a fault condition. Serial Flashing indicates serial port activity. Wired LAN attached On indicates a valid 10BaseT Ethernet Connection. Wired LAN In Use Flashing indicates data transfers using a wired connection. Wireless LAN Attached On indicates an MU is associated with the AP. Wireless LAN In Use Flickering indicates beacons and data transfer with MUs. Attaching the Antenna(s) Antenna coverage is analogous to lighting. Users might find an area lit from far away not bright enough. An area lit sharply might minimize coverage and create dark areas. Uniform antenna placement in an area (like an even placement of light bulbs) provides even, efficient coverage. Place the antenna using the following guidelines: Install the antenna as high as practical. Orient the antenna vertically for best reception. Point the antenna downward attaching the antenna to the ceiling. The AP requires one antenna and can use two. Two antennas provide diversity that can improve performance and signal reception. 1. Attach antennas to ANTENNA connectors on the back of the AP. For a single antenna, use the PRIMARY ANTENNA connector. 2. Refer to antenna documentation for mounting. " " The standard antenna performs well in most office environments. Obtain additional or higher performance antennas from Symbol. Contact a Symbol sales representative to order the following models: " " " " standard rubber antenna single high performance antenna twin high performance diversity antennas mountable F-plane antenna ML 2499-AP A1-00 ML 2499-HP A1-00 ML 2499-D V A1-00 ML 2499-PSA1-00 Symbol continues to add antenna options for Spectrum24 devices. Contact a Symbol sales representative for available antenna options. If installing two antennas, enable the Antenna Selection in the User Interface. Refer to Access Point Installation in the Spectrum24 Access Point AP-3020/AP-3021 Product Reference Guide. Antenna Extension Cables Symbol offers extension cables for AP antenna. Some range loss occurs when increasing the distance between the antenna and the AP. Model Length Loss Range Loss 25-19371 6 ft. 2.0 dB 5% 25-19371-02 12 ft. 4.0 dB 10% To order extension cables contact a Symbol representative. Hardware Installation Mounting the AP The AP rests on a flat surface or attaches to any hard, flat, stable surface. Position the AP at any angle. Use the standard-mounting kit provided. Users can obtain a universal wallmounting bracket (ML-2499-APB1-00) and an AP-3020 adapter bracket (12-20436-01) from Symbol for attaching the AP and antennas to the wall or ceiling. Contact a Symbol sales representative to order. Choose an option based on environment. Resting flat Rests on the four rubber pads on the underside of the AP. Place on a surface clear of debris and away from traffic. Attaching on the wall in any direction. Rests on screws. Orient the AP in any position on the wall. " " Specifications Physical Characteristics: Dimensions: Weight: (w/power supply) Operating Temp: Humidity: Shock: ESD Drop Radio Characteristics: Frequency Range Frequency Hopping Connecting the Power Adapter The power adapter connects to the rear of the AP and to the power outlet. 1. Verify that the power adapter matches the country-of-use adapter. 2. Plug power adapter cable into the socket on the AP back. 3. Plug adapter into outlet. When the Status indicator on the front of the AP flashes consistently and the Wireless LAN Activity indicator begins flickering the AP is functional and ready to associate with MUs. The AP works in a default configuration without user intervention after setup. Refer to Access Point Installation in the Spectrum24 Access Point AP-3020/AP3021 Product Reference Guide for complete installation instructions. Refer to the AP LED indicators to verify proper AP operation. Radio Data Rate Radio Power Output 1Mbps Range 2 Mbps Range TX Maximum ERP Network Connection Locate connectors for Ethernet, antenna and power on the back of the AP. Primary Antenna 10Base-T Power Secondary Antenna Serial Port (Male) UAP3DRearPh3.cdr Ethernet configurations vary according to the environment. Determine the Ethernet wiring to connect the AP. 10Base - T UTP or wireless mode single cell. Note: The site survey determines the APs to install and their location. 1.25” H x 5.5” L x 7.25” W (3.18 cm H x 14.97 cm L x 19.69 cm W) 1 lb (0.454 kg) -4°F to 131 °F (-20 °C to 55 °C) 10% to 95% non-conditioning 40 g, 11mS, half- sine meets CE-Mark Withstands up to a 30 in. (76 cm) drop to Concrete with possible surface marring. Modulation TX Out of Band Emissions country dependent; within 2400 MHz to 2500 MHz. Hops 79 standard 35 in France 27 in Spain 23 in Japan 20 in Belgium (outdoor) 29 in Mexico Hop Rate configurable Hop Sequences 79 (per IEEE 802.11) 1 and 2 Mbps per channel 100mW and 500mW versions open environment - over 1000 ft. (303 m) typical office or retail environment - between 180 and 250 ft. (54.5 to 75.7 m) open environment - 500 ft. (152 m) typical office or retail environment - between 125 and 175 ft. (38 to 53 m) US: FCC part 15.247 Europe: ETS 300,328 Japan: RCR STD-33 Binary GFSK US: FCC part 15,247, 15205, 15,209 Europe: ETS 300,328 Japan: RCR STD-33 Network Characteristics: Driver Support Ethernet Frame Filtering Packet Rate Ethernet Connection Serial SNAP CDI v1.6, NDIS v2.01 DIX, Ethernet II and IEEE 802.3 14,400 frames per second filtering and forwarding 10Base-T (RJ-45) PS/AT serial port - DB9-RS-232, 19200 bps Version 1, MIB-II and Symbol MIB ">
/
Tải xuống
Chỉ là một lời nhắc nhở thân thiện. Bạn có thể xem tài liệu ngay tại đây. Nhưng quan trọng nhất, AI của chúng tôi đã đọc nó. Nó có thể giải thích những điều phức tạp bằng những thuật ngữ đơn giản, trả lời các câu hỏi của bạn bằng bất kỳ ngôn ngữ nào và giúp bạn nhanh chóng điều hướng ngay cả những tài liệu dài nhất hoặc phức tạp nhất.
Quảng cáo