Psion Teklogix 7535 G2 User manual

7535 G2
Hand-Held Computer
User Manual
August 11, 2009
ISO 9001 Certified
Quality Management System
P/N 8000075.E
© Copyright 2009 by Psion Teklogix Inc.
2100 Meadowvale Boulevard, Mississauga, Ontario, Canada L5N 7J9
http://www.psionteklogix.com
This document and the information it contains is the property of Psion Teklogix Inc., is
issued in strict confidence, and is not to be reproduced or copied, in whole or in part, except
for the sole purpose of promoting the sale of Psion Teklogix manufactured goods and services. Furthermore, this document is not to be used as a basis for design, manufacture, or
sub-contract, or in any manner detrimental to the interests of Psion Teklogix Inc.
Disclaimer
Every effort has been made to make this material complete, accurate, and up-to-date. In addition, changes are periodically added to the information herein; these changes will be incorporated into new editions of the publication.
Psion Teklogix Inc. reserves the right to make improvements and/or changes in the product(s) and/or the program(s) described in this document without notice, and shall not be responsible for any damages, including but not limited to consequential damages, caused by
reliance on the material presented, including but not limited to typographical errors.
Windows® and the Windows Logo are trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such
marks by Psion Teklogix Inc. is under license.
All trademarks and trade names are the property of their respective holders.
Return-To-Factory Warranty
Psion Teklogix Inc. provides a return to factory warranty on this product for a period of
twelve (12) months in accordance with the Statement of Limited Warranty and Limitation of
Liability provided at:
www.psionteklogix.com/warranty
The warranty on Psion Teklogix manufactured equipment does not extend to any product
that has been tampered with, altered, or repaired by any person other than an employee of an
authorized Psion Teklogix service organization. See Psion Teklogix terms and conditions of
sale for full details.
Important: Psion Teklogix warranties take effect on the date of shipment.
Service And Information
Psion Teklogix provides a complete range of product support services and information to its
customers worldwide. Services include technical support and product repairs. To locate your
local support services, please go to www.psionteklogix.com/service-and-support.htm
To access further information on current and discontinued products, please go to
https://teknet.psionteklogix.com and log in or tap on “Not Registered?”, depending on whether
you have previously registered for Teknet. A section of archived product information is
available online.
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
This Product, and its accessories, comply with the requirements of the Waste Electrical and
Electronic Equipment (WEEE) Directive 2002/96/EC. If your end-of-life Psion Teklogix
product or accessory carries a label as shown here, please contact your local country representative for details on how to arrange recycling.
For a list of international subsidiaries, please go to:
www.psionteklogix.com/EnvironmentalCompliance
Restriction On Hazardous Substances (RoHS) Directive 2002/95/EC
What is RoHS?
The European Union has mandated that high environmental standards be met in the design
and manufacture of electronic and electrical products sold in Europe, to reduce hazardous
substances from entering the environment. The “Restriction on Hazardous Substances Directive (RoHS)” prescribes the maximum trace levels of lead, cadmium, mercury, hexavalent chromium, and flame retardants PBB and PBDE that may be contained in a product.
Only products meeting these high environmental standards may be “placed on the market”
in EU member states after July 1, 2006.
RoHS Logo
Although there is no legal requirement to mark RoHS-compliant products, Psion Teklogix
Inc. indicates its compliance with the directive as follows:
The RoHS logo located either on the back of the product or underneath the battery in the
battery compartment (or on a related accessory such as the charger or docking station) signifies that the product is RoHS-compliant as per the EU directive. Other than as noted below,
a Psion Teklogix product that does not have an accompanying RoHS logo signifies that it
was placed on the EU market prior to July 1, 2006, and is thereby exempt from the directive.
Note:
Not all accessories or peripherals will have a RoHS logo due to physical space
limitations or as a result of their exempt status.
TABLE OF CONTENTS
Program License Agreements . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Approvals And Safety Summary . . . . . . . . . . . . . . . . . . . . . . . . . xix
Chapter 1: Introduction
1.1
1.2
1.3
1.4
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7535 G2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About The 7535 G2 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.4.1 The 7535 G2 Hand-Held Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4.2 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2: Basic Checkout
2.1
Preparing The 7535 G2 For Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.1.1 Equipment You Need To Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.2
Powering Up The 7535 G2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.2.1 Charging The Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.2.2 Installing The Battery And Switching The Computer On . . . . . . . . . . . . . . . . . . . . . . . 15
2.3
Attaching Carrying Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.3.1 Attaching The Hand Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2.3.2 Attaching The Pistol Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
2.4
2.5
2.6
Calibrating The Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Configuring An IEEE 802.11 Radio In The Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.6.1 Assigning An IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
2.6.2 Name Servers Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.6.3 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
2.6.3.1 Rearranging Preferred Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.6.3.2 Deleting A Preferred Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.6.3.3 Changing Network Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Summit Client Utility (SCU) For RA2041 802.11b/g Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.7.1 Assigning The IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2.7.2 Name Servers Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2.7
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
i
Contents
2.7.3
2.8
2.9
Using The SCU To Connect To The WLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2.7.3.1 SSID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2.7.3.2 EAP Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
2.7.3.3 Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Checking The Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Data Transfer Between The 7535 G2 And A PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.9.1 Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.9.2 Using Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
2.10 Resetting The 7535 G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Chapter 3: Getting To Know Your 7535 G2
3.0.1
3.0.2
3.0.3
3.0.4
3.1
3.2
ii
Battery Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Removing And Installing The Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Battery Chargers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Monitoring The Battery And Maximizing Run Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3.0.4.1 Storing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Switching The Hand-Held On And Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
3.2.1 Modifier Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.2.1.1 Activating Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3.2.1.2 Locking Modifier Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.2.2 The Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
3.2.3 Function Keys, Softkeys And Macro Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
3.2.3.1 Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
3.2.3.2 Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3.2.4 Alphanumeric Keyboard: 58-Key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3.2.5 Numeric Keyboard: 36-Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
3.2.6 The Keypad Backlight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.3
The Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.3.1 Adjusting The Display Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
3.3.2 Adjusting The Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3.3.3 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3.4
7535 G2 Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
3.4.1 LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
3.4.1.1 Charge LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3.4.1.2 Radio Traffic LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3.4.1.3 Scan LED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
3.4.1.4 User Application LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
3.4.2 Onscreen Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Contents
3.4.3
3.5
3.6
3.7
3.8
3.9
Audio Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3.4.3.1 Adjusting The Beeper Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Internal Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
3.5.1 Scanning Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
3.5.2 Scan LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
3.5.3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
3.5.4 Operating One Dimensional (1D) Internal Laser Scanners . . . . . . . . . . . . . . . . . . . . . .60
3.5.5 Operating Internal PDF Laser Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
3.5.6 Operating Internal Two Dimensional (2D) Imager Scanners . . . . . . . . . . . . . . . . . . . . 61
3.5.7 Operating RFID/Scanner Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Connecting And Disconnecting Tethered Peripherals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Monitoring The Network Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Uploading Data In A Docking Station. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
General Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
3.9.1 Caring For The Touchscreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
3.9.2 Cleaning The 7535 G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Chapter 4: Windows Embedded CE 5.0
4.1
Navigating In Windows CE And Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
4.1.1 Navigating Using A Touchscreen And Stylus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69
4.1.2 Navigating Using The Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
4.2
4.3
Working With Files, Folders And Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
The Startup Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
4.3.1 The Desktop Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
4.3.2 The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
4.3.2.1 Using The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
4.3.2.2 Customizing The Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
The Start Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
4.4.1 The Desktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
4.4.2 Security Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.3 Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
4.4.4 Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
4.4.5 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
4.4.6 Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
4.4.7 Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
4.4
4.5
Using A Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
iii
Contents
Chapter 5: Configuration
5.1
5.2
5.3
5.4
5.5
5.6
iv
Remote Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
The TekTerm Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Pocket PC Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Control Panel Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Control Panel Applications: Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
5.6.1 App Launch Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
5.6.2 Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
5.6.3 Display Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.6.3.1
Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5.6.3.2
Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
5.6.3.3
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
5.6.3.4
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
5.6.4 Input Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
5.6.5
Keyboard Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
5.6.5.1 Key Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
5.6.5.2 Keyboard Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105
5.6.5.3 Keyboard One Shot Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106
5.6.5.4 Keyboard Macro Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
5.6.5.5 Unicode Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
5.6.5.6 Scancode Remapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
5.6.5.7 Lock Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
5.6.6 Manage Triggers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
5.6.6.1 Trigger Mappings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
5.6.6.2 Add And Edit Trigger Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
5.6.7 Power Management Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
5.6.7.1 Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
5.6.7.2 Power Saving Suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
5.6.7.3 Suspend Threshold And Estimated Battery Backup. . . . . . . . . . . . . . . . . .120
5.6.7.4 Calibrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
5.6.7.5 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
5.6.7.6 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
5.6.7.7 Built In Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
5.6.8 Stylus Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
5.6.8.1 Double-Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
5.6.8.2 Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
5.6.8.3 Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
5.6.9 Volume And Sounds Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
5.6.9.1 Volume Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Contents
5.7
5.6.9.2 Sound Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
Bluetooth Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126
5.7.1 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127
5.7.2 Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131
5.7.3 Servers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
5.7.4 Outgoing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
5.7.5 Active Conn. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
5.7.6 Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135
5.7.7 Search For . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
5.8 Error Reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
5.9 IPv6 Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
5.10 Scanner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
5.10.1 Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
5.10.1.1 Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139
5.10.1.2 Restoring Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
5.10.2 Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
5.10.2.1 Double Click Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
5.10.2.2 Display Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
5.10.3 Translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143
5.10.3.1 Case Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
5.10.4 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
5.10.4.1 Tether Port (COM1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
5.10.4.2 Console Port (COM3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
5.10.4.3 Port Replicator Tether (COM6). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
5.10.4.4 Port Replicator Port A (COM5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
5.11 SNMP (Simple Network Management Protocol) Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
5.11.1 Contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
5.11.2 Communities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
5.11.2.1 Adding A Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
5.11.2.2 Modifying A Community Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
5.11.2.3 Removing An Existing Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
5.11.3 Trap Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
5.11.3.1 Enabling Authentication TRAPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
5.11.3.2 Adding A Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
5.11.3.3 Changing A Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
5.11.3.4 Removing A Trap Destination. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
5.11.4 Permitted Hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156
5.11.4.1 Adding A Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
5.11.4.2 Changing A Host. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
5.12 The Storage Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
v
Contents
5.12.1 Formatting A Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
5.12.2 Creating Partitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
5.12.3 Partition Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
5.13 Teklogix Error Handling Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
5.13.1 ErrorLogInfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
5.13.2 NetLog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
5.14 Teklogix Imagers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
5.15 Total Recall. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
5.15.1 Creating A Backup Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
5.15.2 Restoring A Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
5.16 TweakIT Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
5.16.1 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
5.16.1.1 Advanced Interface And Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
5.16.1.2 Advanced Services Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
5.16.1.3 Advanced Intermediate Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172
5.16.1.4 Radio Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
5.16.2 User. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
5.16.2.1 Internet Explorer Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
5.16.2.2 User Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
5.16.2.3 User System Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
5.16.3 Registry Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Chapter 6: Peripheral Devices & Accessories
vi
6.1
External Bar Code Readers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
6.1.1 PowerScan® Standard, LR and XLR Bar Code Scanners . . . . . . . . . . . . . . . . . . . . . .179
6.1.2 Entering Data With The Bar Code Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
6.2
6.3
6.4
RD7950 Integrated UHF RFID Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Battery Charging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
6.4.1 Battery Gas Gauge Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
6.5
Gang Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
6.5.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
6.5.2 Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
6.5.3 Charge Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
6.5.4 Charging Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
6.5.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
6.5.5.1 Excessive Charge Duration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
6.5.5.2 Improper Battery Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
6.5.5.3 Indicator Flashing Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Contents
6.6
6.7
6.5.5.4 Power LED Does Not Light Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
6.5.5.5 Indicator Does Not Light When Battery Installed. . . . . . . . . . . . . . . . . . . .184
Combo Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
6.6.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
6.6.2 Operator Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
6.6.3 Using the Combo Charger With The 7535 G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
6.6.4 Charging The Spare Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185
6.6.5 Charge Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
6.6.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
Combo Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
6.7.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
6.7.2 Using The Combo Dock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186
6.7.3 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
6.7.4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
6.8
Quad Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
6.8.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187
6.8.2 Indicators And Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
6.8.3 Using The Quad Dock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
6.8.4 Network Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
6.8.4.1 Network Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
6.8.5 Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
6.8.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
6.8.6.1 Network Link Unsuccessful . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
6.8.6.2 7535 G2 LED Does Not Light When Docked . . . . . . . . . . . . . . . . . . . . . . .189
6.9 Portable Docking Module (PDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190
6.10 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192
6.11 The 7535 G2 Picker Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
6.11.1 Picker Cradle Mounting Recommendations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193
6.11.1.1 Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
6.11.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
6.11.3 Using The Picker Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
6.11.4 Maintaining The Picker Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194
6.11.5 Powered Cradle Installation In High Voltage Vehicles . . . . . . . . . . . . . . . . . . . . . . . . .195
6.11.5.1 Extreme Wet Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .195
6.11.6 Powered Cradle Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196
6.11.7 Wiring Vehicle Power To The Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
6.11.8 The Port Replicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197
6.12 Tether Adaptor Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
vii
Contents
Chapter 7: Specifications
7.1
7535 G2 Hand-Held Computer Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
7.1.1 Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201
7.1.2 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .203
7.1.3 Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204
7.2
7.3
7.4
7.5
7.6
Radio Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204
Internal Scanner Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
RFID Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
External Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
Internal Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
7.6.1 EV15 Imager Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
7.6.1.1 EV15 Imager Decode Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207
7.6.2 SE1200 High Performance And Long Range Specifications . . . . . . . . . . . . . . . . . . .207
7.6.3 SE1200 Advanced Long Range And SE2223PDF Specifications . . . . . . . . . . . . . .209
7.6.3.1 SE1200 And SE2223 Decode Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210
7.6.4 SE1224HP Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211
7.6.4.1 SE1224HP Decode Zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
7.6.5 SE1524ER – Extended Range Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212
7.6.5.1 SE1524ER Decode Zones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .213
7.6.6 SX5400* Imager Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215
7.6.6.1 SX5400 Imager Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
External Scanner Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216
7.7.1 PowerScan® LR and XLR Industrial Scanner Specifications. . . . . . . . . . . . . . . . . . .216
7.7.2 PowerScan Standard Range Scanner Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . .219
7.7
7.8
7.9
RD7950 Integrated UHF RFID Reader. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
HU3000 - 1900 mAh Lithium-ion Battery Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221
Appendix A: Port Pinouts
A.1
A.2
A.3
Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Docking Station Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Battery Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Appendix B: SCU For RA2041 802.11b/g Radio
B.1
viii
SCU Tabs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-3
B.1.1 Main . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-3
B.1.2 Profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-4
B.1.3 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-9
B.1.4 Diags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-9
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Contents
B.1.5
Global . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-10
Appendix C: Bar Code Settings
C.1
C.2
C.3
Bar Code Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5
C.1.1 Scanner Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-5
C.1.2 Restoring Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-6
Decoded (Internal) Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-8
C.2.1 Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-8
C.2.2 Decoded (Internal) Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-9
C.2.3 Decoded (Internal) 2D Scanning Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11
C.2.4 Decoded (Internal) Data Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-11
C.2.5 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12
C.2.6 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-15
C.2.7 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-16
C.2.8 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-16
C.2.9 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-17
C.2.10 UPC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-17
C.2.11 UPC/EAN Shared Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-18
C.2.12 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-19
C.2.13 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-20
C.2.14 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-21
C.2.15 Interleaved 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-22
C.2.16 Discrete 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-23
C.2.17 RSS Code (Reduced Space Symbology) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-23
C.2.18 Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-24
C.2.19 PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-24
C.2.20 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-25
Decoded (Intermec ISCP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-26
C.3.1 Decoded (ISCP) Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-26
C.3.2 Decoded (ISCP) Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-26
C.3.3 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-27
C.3.4 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-29
C.3.5 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-30
C.3.6 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-31
C.3.7 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-31
C.3.8 UPC E Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-32
C.3.9 UPC/EAN Shared Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-32
C.3.10 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-33
C.3.11 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-34
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
ix
Contents
C.4
x
C.3.12 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-35
C.3.13 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-36
C.3.14 Interleaved 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-36
C.3.15 Matrix 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-37
C.3.16 Discrete 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-38
C.3.17 Telepen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-38
C.3.18 RSS Code (Reduced Space Symbology) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-39
C.3.19 Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-40
C.3.20 TLC-39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-40
C.3.21 PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-41
C.3.22 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-41
C.3.23 Codablock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-42
Imager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-42
C.4.1 Imager Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-42
C.4.2 Imager Advanced Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-44
C.4.3 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-46
C.4.4 Code 128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-47
C.4.5 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-47
C.4.6 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-48
C.4.7 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-48
C.4.8 UPC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-48
C.4.9 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-49
C.4.10 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-49
C.4.11 Interleaved 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-49
C.4.12 RSS Code (Reduced Space Symbology) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-50
C.4.13 Composite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-50
C.4.14 PDF-417. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-50
C.4.15 Micro PDF-417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-51
C.4.16 2D Data Matrix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-51
C.4.17 2D QR Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-51
C.4.18 2D Maxicode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-52
C.4.19 2D Aztec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-52
C.4.20 Postal: PlaNET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-52
C.4.21 Postal: PostNET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53
C.4.22 Postal: Australian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53
C.4.23 Postal: Japanese . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-53
C.4.24 Postal: Korean. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-54
C.4.25 Postal: Royal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-54
C.4.26 Postal: Kix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-54
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Contents
C.5
C.4.27 Postal: Canadian. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-54
Non-Decoded Scanners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-55
C.5.1 Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-56
C.5.2 Code 39 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-56
C.5.3 Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-58
C.5.4 EAN 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-59
C.5.5 EAN 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-60
C.5.6 UPC A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-60
C.5.7 UPC E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-61
C.5.8 Codabar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-62
C.5.9 Code 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-62
C.5.10 Code 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-63
C.5.11 Interleaved 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-64
C.5.12 MSI Plessey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-64
C.5.13 Discrete 2 of 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-65
C.5.14 IATA 2 of 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-66
Appendix D: Teklogix Imagers Applet
D.1
D.2
D.3
D.4
Required Applets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3
Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-3
D.2.1 Predefined Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4
D.2.2 Bar Code Predefined Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-4
D.2.3 Bar Code Decoding Camera Predefined Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5
D.2.4 Image Capture Predefined Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-5
Using The Teklogix Imagers Applet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-6
D.3.1 Configuring The Image Capture Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-6
D.3.2 Selecting A Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7
D.3.3 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7
D.3.4 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7
D.3.5 Creating A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-7
D.3.6 Modifying A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8
D.3.7 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9
Configuring The Bar Code Decoding Camera Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-9
D.4.1 Selecting A Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10
D.4.2 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11
D.4.3 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11
D.4.4 Creating A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-11
D.4.5 Modifying A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-12
D.4.6 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-13
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xi
Contents
D.5
D.4.7 Configuring The Bar Code Decoding Symbologies . . . . . . . . . . . . . . . . . . . . . . . . . . D-13
D.4.8 Setting The Active Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14
D.4.9 Viewing A Preset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-14
D.4.10 Creating A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-15
D.4.11 Modifying A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-16
D.4.12 Removing A Custom Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-17
D.4.13 Configuring Symbologies in the Teklogix Imagers Applet . . . . . . . . . . . . . . . . . . . D-17
D.4.14 Filter Tab – Manipulating Bar Code Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-17
D.4.15 Translation Tab – Configuring Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-19
D.4.16 Advanced Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-20
Teklogix Scanners Applet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-21
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I
xii
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
PROGRAM LICENSE AGREEMENTS
Microsoft's End User License Agreement
You have acquired a device (“DEVICE”) that includes software licensed by Psion
Teklogix Inc. from Microsoft Licensing Inc. or its affiliates (‘MS”). Those installed
software products of MS origin, as well as associated media, printed materials, and
“online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold.
All rights reserved.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT
(“EULA”), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT PSION TEKLOGIX INC. FOR
INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A
REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT
LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR
AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS
CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following
license:
•
•
•
You may use the SOFTWARE only on the DEVICE.
NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. PSION TEKLOGIX INC. HAS INDEPENDENTLY DETERMINED
HOW TO USE THE SOFTWARE IN THE DEVICE, AND MS HAS RELIED
UPON PSION TEKLOGIX INC. TO CONDUCT SUFFICIENT TESTING
TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided
“AS IS” and with all faults. THE ENTIRE RISK AS TO SATISFACTORY
QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU
HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR
THE SOFTWARE, THOSE WARRANTIES DO NOT ORIGINATE FROM,
AND ARE NOT BINDING ON, MS.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xiii
Chapter : Program License Agreements
•
•
•
•
•
Note on Java Support. The SOFTWARE may contain support for programs written in
Java. Java technology is not fault tolerant and is not designed, manufactured, or
intended for use or resale as online control equipment in hazardous environments
requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft
navigation or communication systems, air traffic control, direct life support machines,
or weapons systems, in which the failure of Java technology could lead directly to
death, personal injury, or severe physical or environmental damage. Sun Microsystems,
Inc. has contractually obligated MS to make this disclaimer.
No Liability for Certain Damages. EXCEPT AS PROHIBITED BY LAW, MS
SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE.
THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS
ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY
AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS
(U.S.$250.OO).
Limitations on Reverse Engineering, Decompilation, and Disassembly. You may
not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to
the extent that such activity is expressly permitted by applicable law notwithstanding
this limitation.
SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may
permanently transfer rights under this EULA only as part of a permanent sale or transfer
of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an
upgrade, any transfer must also include all prior versions of the SOFTWARE.
EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S.
export jurisdiction. You agree to comply with all applicable international and national
laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other
governments. For additional information see http://www.microsoft.com/exporting/.
Psion Teklogix Inc. End User License Agreement
IMPORTANT – READ CAREFULLY:
This License Agreement (“Agreement”) is a legal agreement between you and Psion Teklogix (“we”), the licensor of this software package (“Software”), for your use of the
Software only as authorized in this Agreement.
By clicking on the “Accept” or other appropriate assent button and/or installing the Software, you agree to be and are hereby bound by the terms and conditions of this Agreement.
If you do not agree with this Agreement, we do not grant you a license to the Software, and
you may not install or use the Software or any accompanying documentation.
xiv
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter : Program License Agreements
The Software is the property of Psion Teklogix Inc. or its licensors and is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and
treaties. The Software is licensed, not sold. Psion Teklogix Inc. provides the Software and licenses its use worldwide. You assume responsibility for the selection of the Software to
achieve your intended results, and for the use and results obtained from it.
1. GRANT OF LICENSE
We hereby grant you and you hereby accept a non-exclusive, non-transferable, limited
license to install and use the Software in object code form only, subject to the terms and restrictions set forth in this Agreement. Except as explicitly set forth below, (i) you are not
permitted to copy, sell, lease or rent, distribute or sublicense the Software or to use the Software in a time-sharing arrangement or in any other unauthorized manner; (ii) no license is
granted to you in the human readable code of the Software (source code); and (iii) this
Agreement does not grant you any rights to patents, copyrights, trade secrets, trademarks,
intellectual property or any other ownership rights with respect to the Software.
2. DESCRIPTION OF REQUIREMENTS, RESTRICTIONS, RIGHTS, AND
LIMITATIONS
a. Copy. The right and license granted to you shall be limited to installation and use of the
Software up to but not exceeding the number of copies you have licensed. However,
you may make a copy of the Software for backup or archival purposes. You shall not
remove any copyright notice or proprietary notices, labels or marks in or on the
Software.
b. Evaluation. As part of evaluation, you may install and use the Software only during the
specified evaluation period. Unless you register the license as described below, the evaluation license shall expire upon the expiration of the evaluation period.
c. License Registration. You will be required to provide a license ID, unique to each
device, for registering your Software license. As part of your software license registration, we will provide you a corresponding license key for each device.
d. No Modifications. You may not modify or create any derivative work of the Software
or any copy or portion thereof nor may you remove any Software identification, copyright or other notices.
e. No Distribution. You may not distribute the Software, in whole or in part, to any other
third party.
f.
Virus Program. You may not develop or knowingly incorporate any virus program that
may be harmful to a computer or a network in conjunction with the Software, or use the
Software for any other purpose as which may be harmful to a third party.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xv
Chapter : Program License Agreements
g. Assignment. You may not assign or transfer the Software to a third party or allow a
third party to use the same.
h. Reverse Engineering. Modification, reverse engineering, reverse compiling, disassembly, unbundling or extraction of the Software is expressly prohibited.
i.
Export Restrictions. You agree to comply with all applicable laws and regulations and
that you will not export or re-export the Software, or any part or copies thereof, or any
products utilizing the Software in violation of applicable laws or regulations of the
United States or the country in which you obtained them.
3. HIGH RISK ACTIVITIES
The Software is not fault-tolerant and is not designed, manufactured or intended for use or
resale as on-line control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication
systems, air traffic control, direct life support machines, or weapons systems, in which the
failure of the Software could lead to death, personal injury, or severe physical or environmental damage (“High Risk Activities”). We specifically disclaim any express or implied
warranty of fitness for High Risk Activities.
4. DISCLAIMER OF WARRANTY
We do not warrant uninterrupted or error free operation of the Software nor do we warrant
that the Software will meet your requirements. THE SOFTWARE IS PROVIDED “AS-IS”
WITHOUT ANY WARRANTY WHATSOEVER AND WITHOUT ANY TECHNICAL
SUPPORT OF ANY KIND. WE DISCLAIM ANY AND ALL REPRESENTATIONS,
WARRANTIES AND CONDITIONS, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABLE QUALITY OR FITNESS FOR A PARTICULAR PURPOSE. WE DO
NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR
THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, USE WITH FUTURE PSION TEKLOGIX
DEVICES INTRODUCED, OR OTHERWISE. YOU EXPRESSLY ACKNOWLEDGE
AND AGREE THAT USE OF THE SOFTWARE IS AT YOUR SOLE RISK AND YOU
ARE RESPONSIBLE FOR INSTALLATION OF THE SOFTWARE ON YOUR
COMPUTER.
5. LIMITATION OF LIABILITY
We are liable for no more than the value of the license fee that you paid for the Software.
This limitation is cumulative and our responsibility for multiple claims will not exceed in
aggregate this limit.
xvi
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter : Program License Agreements
Under no circumstances are we or our third party suppliers liable for damages of third
parties claimed against you, or for harm to your records or data, or special, incidental, indirect, or consequential damages, including but not limited to lost profits, lost business
revenue or failure to realize expected savings, loss of data, loss of use of the Software or any
associated equipment, downtime and user’s time, even if you informed us of their possibility, or for breach of any express or implied warranty, breach of contract, negligence, strict
liability or any other legal theory related to the Software. This limitation applies whether
you are entitled to claim damages from us or our third party suppliers as a matter of contract
or tort.
6. COPYRIGHTS, OWNERSHIP AND PROPRIETARY RIGHTS
All title and copyrights in and to the Software, and any copies thereof, are owned by Psion
Teklogix Inc. or its suppliers. The Software also contains copyrighted material licensed from
our suppliers or obtained from open source and all rights to such copyrighted material rests
with such suppliers. Additional third party license terms and conditions may apply. We
retain title to the Software and any copies made from it. Any copies of the Software you
made are subject to the restrictions of this Agreement.
WE DISCLAIM ALL WARRANTIES AND INDEMNITIES, EXPRESS, IMPLIED OR
STATUTORY, FOR PATENT OR COPYRIGHT INFRINGEMENT.
7. CONFIDENTIALITY
You agree not to use or disclose any proprietary information provided by us, except for the
purposes of this Agreement. You agree not to reproduce any of the copyrighted materials
unless expressly permitted by this Agreement.
8. ENDING THIS AGREEMENT
We may terminate this Agreement and your license immediately without notice if (a) you
fail to comply with any term of this Agreement, or (b) your rights are assigned by you, by
operation of law or otherwise. In such event, you must return or destroy all copies and component parts of the Software and documentation, as well as any other Psion Teklogix
proprietary information in your possession, within fourteen (14) days of the date of termination. Any rights and obligations under this Agreement that by their nature continue after it
ends will remain in effect until they are completed.
9. GENERAL
The laws of the Province of Ontario and the federal laws applicable therein, excluding the
conflict of laws provisions, govern this Agreement. If any provision of this Agreement is
deemed invalid or unenforceable by any country, that particular provision will be deemed
modified to the extent necessary to make the provision valid and enforceable, and the remaining provisions will remain in full force and effect. Failure by us to insist on strict
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xvii
Chapter : Program License Agreements
performance or to exercise a right when entitled, does not prevent us from doing so at a later
time, either in relation to that default or any subsequent one.
No modifications of this Agreement shall be effective unless in writing and approved by us.
You acknowledge that you have read this Agreement, understand it, and that it is the complete agreement between you and Psion Teklogix with respect to the subject matter hereof
and supersedes all prior agreements, oral or written.
xviii
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
APPROVALS AND SAFETY SUMMARY
FCC DECLARATION OF CONFORMITY (DOC)
Applicant’s Name & Address:
PSION TEKLOGIX INC.
2100 Meadowvale Blvd.
Mississauga, Ontario
Canada L5N 7J9
Tel: (905) 813-9900
US Representative’s Name & Address:
PSION TEKLOGIX CORP.
1810 Airport Exchange Blvd., Suite 500
Erlanger, KY, 41018, USA
Tel: (859) 372-4329
Equipment Type/Environment:
Computing Devices
Trade Name / Model No.:
7535 G2 Hand-Held Computer with
Portable Docking Module
Year of Manufacture:
2006
Standard(s) to which Conformity is Declared:
The 7535 G2 Hand-Held Computer with Portable Docking Module, supplied by Psion Teklogix, has been
tested and found to comply with FCC PART 15, SUBPART B - UNINTENTIONAL RADIATORS,
CLASS B COMPUTING DEVICES FOR HOME & OFFICE USE.
I, the undersigned, hereby declare that the equipment as tested is representative within manufacturing tolerance to units.
Applicant
Legal Representative in U.S.
Signature
Signature
Mike Doyle
Kyle Day
Full Name
Full Name
Vice President, Engineering
Vice President, Channel Sales
Position
Position
Mississauga, Ontario, Canada
Hebron, KY 41048, USA
Place
Place
June 2006
June 2006
Date
Date
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xix
Chapter : Approvals And Safety Summary
CE Marking
When used in a residential, commercial or light industrial environment the product and its
approved UK and European peripherals fulfil all requirements for CE marking.
R&TTE Directive 1999/5/EC
This equipment complies with the essential requirements of EU Directive 1999/5/EC (Declaration available: www.psionteklogix.com).
Cet équipement est conforme aux principales caractéristiques définies dans la Directive européenne RTTE 1999/5/CE. (Déclaration disponible sur le site: www.psionteklogix.com).
Die Geräte erfüllen die grundlegenden Anforderungen der RTTE-Richtlinie (1999/5/EG).
(Den Wortlaut der Richtlinie finden Sie unter: www.psionteklogix.com).
Questa apparecchiatura è conforme ai requisiti essenziali della Direttiva Europea R&TTE
1999/5/CE. (Dichiarazione disponibile sul sito: www.psionteklogix.com).
Este equipo cumple los requisitos principales de la Directiva 1995/5/CE de la UE, “Equipos
de Terminales de Radio y Telecomu-nicaciones”. (Declaración disponible en:
www.psionteklogix.com).
Este equipamento cumpre os requisitos essenciais da Directiva 1999/5/CE do Parlamento
Europeu e do Conselho (Directiva RTT). (Declaração disponível no endereço:
www.psionteklogix.com).
Ο εξοπλισμός αυτός πληροί τις βασικές απαιτήσεις της κοινοτικής οδηγίας EU R&TTE
1999/5/EΚ. (Η δήλωση συμμόρφωσης διατίθεται στη διεύθυνση: www.psionteklogix.com)
Deze apparatuur voldoet aan de noodzakelijke vereisten van EU-richtlijn betreffende radioapparatuur en telecommunicatie-eindappa-ratuur 199/5/EG. (verklaring beschikbaar:
www.psionteklogix.com).
Dette udstyr opfylder de Væsentlige krav i EU's direktiv 1999/5/EC om Radio- og teleterminaludstyr. (Erklæring findes på: www.psionteklogix.com).
Dette utstyret er i overensstemmelse med hovedkravene i R&TTE-direktivet (1999/5/EC)
fra EU. (Erklæring finnes på: www.psionteklogix.com).
Utrustningen uppfyller kraven för EU-direktivet 1999/5/EC om ansluten teleutrustning och
ömsesidigt erkännande av utrustningens överensstämmelse (R&TTE). (Förklaringen finns
att läsa på: www.psionteklogix.com).
Tämä laite vastaa EU:n radio- ja telepäätelaitedirektiivin (EU R&TTE Directive 1999/5/EC)
vaatimuksia. (Julkilausuma nähtävillä osoitteessa: www.psionteklogix.com).
xx
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter : Approvals And Safety Summary
Psion Teklogix tímto prohlašuje, že 7535 G2 je ve shodě se základními požadavky a dalšími
příslušnými ustanoveními směrnice 1995/5/ES (NV č. 426/2000 Sb.) a Prohlášení o shodě je
k dispozici na www.psionteklogix.com. Toto zarízení lze provozovat v České republice na
základě generální licence č. GL-12/R/2000.
Psion Teklogix týmto vyhlasuje, že 7535 G2 spĺňa základné požiadavky a všetky príslušné
ustanovenia Smernice 1995/5/ES (NV č. 443/2001 Z.z.) a Vyhlásenie o zhode je k dispozícii
na www.psionteklogix.com. Toto zariadenie je možné prevádzkovat’ v Slovenskej republike
na základe Všeobecného povolenia č. VPR-01/2001.
Use of the 802.11g 7535 G2 Hand-Held in France:

Owing to French Government restrictions, the 802.11g 7535 G2 Hand-Held Computer
is limited to indoor use. It may be used outdoors, on private property, only with prior
authorization from the French Ministry of Defense.
FCC Information To Users
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xxi
Chapter : Approvals And Safety Summary
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Important: FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment under 47 CFR 2.1093 paragraph (d)(2), for
use in a PDA. End users must follow the specific operating instructions for
satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
Some equipment in hospitals and aircraft are not shielded from radio frequency energy. Do not use the 7535 G2 hand-held onboard aircraft, or in
hospitals, without first obtaining permission.
Do not use near pacemakers. The product may affect the operation of some
medically implanted devices such as pacemakers, causing them to malfunction. Avoid placing your product next to such devices. Keep a minimum
distance of 20 cm between the device and the product to reduce the risk of
interference. If you have any reason to suspect that interference is taking
place, turn off the 7535 G2 hand-held and contact your cardiologist for
assistance.
Note: To maintain compliance with the FCC RF exposure guidelines, if you wear the
7535 G2 on your body, use the Psion Teklogix approved carrying case.
Use of non-approved accessories may violate FCC RF exposure guidelines.
Emissions Information For Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations. When using the 802.11 radio option, to prevent radio interference,
this device is intended to be operated indoors and away from windows to provide maximum
shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to
licensing.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. En cas d’utilisation du module radio 802.11, afin d'éviter toute
interférence radio avec le service autorisé, l'appareil doit être utilisé à l'intérieur, tout en tant
éloigné de toute fenêtre afin de garantir le maximum de protection. Si cet équipement (ou
son antenne émettrice) est installé à l'extérieur, il est alors soumis à licence.
xxii
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter : Approvals And Safety Summary
Warnings To Users
This product is a Class I/Class II laser product according to CDRH 21 CFR 1040.10 and
1040.11 and Class1/Class 2 laser product according to IEC 60825-1 Ed. 2.0.
The SE1200 ALR has an maximum radiated power less than 1.4 mW; according to EN
60825-1: 2001 it is classified as a Class 3B laser product.
Laser Warnings
Important: For your own safety, it is critical that you comply with the following
warnings.
•
Do not look into the laser beam or point the beam at people or animals
Aperture
A label is affixed below
the aperture.
•
•
•
•
Using controls or adjustments, or performing procedures other than those specified
herein may result in hazardous radiation exposure.
The use of optical instruments (magnification devices) with this product will increase
eye hazard.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE. Operating Psion Teklogix
equipment where explosive gas is present may result in an explosion.
DO NOT REMOVE COVERS OR OPEN ENCLOSURES. To avoid injury, the equipment covers and enclosures should only be removed by qualified service personnel. Do
not operate the equipment without the covers and enclosures properly installed.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xxi-
Chapter : Approvals And Safety Summary
•
•
Danger of explosion if a 7535 G2 battery is incorrectly handled, charged, disposed of or
replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the instructions described in “Lithium-ion
Battery Safety Precautions”, below. Carefully review all battery safety issues.
VORSICHT! Explosiongefahr bei unsachgemäßem Austausch der Batterie Ersatz nur
durch denselben oder einen vom Hersteller empfohlenen gleichwertigen Typ.
Entsorgung gebrauchter Batterien nach Angaben des Herstellers.
Lithium-ion Battery Safety Precautions
Important: Before charging or using the battery pack, it is critical that the safety information in this section is reviewed and that all warnings are strictly followed.
Warning: BATTERIES ARE CONSIDERED HAZARDOUS WASTE and must be
returned to Psion Teklogix for proper disposal. Forward all used batteries to
one of the following offices:
Psion Teklogix Inc.
2100 Meadowvale Blvd.
Mississauga, Ontario
Canada L5N 7J9
Psion Teklogix Corp.
3000 Kustom Drive
Hebron, Kentucky
USA 41048
Psion Teklogix S.A.
La Duranne, 135 Rue Rene Descartes
BP 421000, 13591 Aix-En-Provence
Cedex 3; France
Warning: TO PREVENT the battery from leaking acid, generating heat or exploding,
adhere to the precautions listed below.
•
•
•
•
•
xxiv
The battery incorporates built-in safety devices. To ensure their proper function, do not
disassemble or alter any parts of the battery.
Do not short-circuit the battery by directly connecting any of the exposed terminals with
metal objects such as wire. Do not transport or store the battery together with metal
objects such as necklaces, hair pins, etc.
Do not dispose of batteries in fire.
Do not use or leave the battery near a heat source such as a fire or heater.
Do not immerse the battery in water.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter : Approvals And Safety Summary
•
•
•
•
•
•
When charging, use the battery charger specifically designed for the battery.
Do not pierce, strike, throw or step on the battery.
Do not directly solder the battery.
Do not connect the battery to an electrical outlet, vehicle cigarette lighter, etc.
Do not put battery into a microwave oven or pressurized container.
Do not use the battery in combination with primary batteries (such as dry-cell batteries)
or batteries of different capacities or brands.
• Immediately remove the battery from the device or battery charger and stop use if the
battery gives off an odour, generates heat, becomes discoloured or deformed, or in any
way appears abnormal during use.
• Do not continue charging the battery if it does not recharge within the specified charge
time.
• The battery may burst or ignite if the battery leaks. Always ensure that it is away from
any exposed flames.
• If leaking electrolyte sprays into your eyes, rinse them with clean running water, and
immediately seek medical attention.
• Do not store the battery in extremely high temperatures (e.g., a vehicle, strong direct
sunlight, etc.). This may cause the battery to overheat or ignite, and it may also reduce
the performance and service life of the battery.
• Do not use in areas where static electricity is greater than what the manufacturer
guarantees.
• Keep batteries out of reach of children.
Always switch the unit off before changing the battery. While the battery is being replaced,
the 7535 G2 will save its current data for at least 10 minutes.
Important: Charger And AC/DC Adaptor Safety Instructions
•
•
•
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for battery chargers and AC/DC adaptors.
Before using the battery charger or AC/DC adaptor, read all instructions and cautionary
markings on the (1) AC/DC adaptor, (2) battery charger, (3) battery, and (4) product
using the battery.
The mains power cord shall comply with national safety regulations of the country
where the equipment is to be sold.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
xxv
Chapter : Approvals And Safety Summary
•
•
•
•
•
•
•
•
Use of an attachment not recommended or sold by the battery charger or AC/DC
adaptor manufacturer may result in fire, electric shock, or personal injury.
To reduce risk of damage to the electric plug and cord when unplugging the charger or
AC/DC adaptor, pull the plug rather than the cord.
Make sure the cord is positioned so that it is not stepped on, tripped over, or otherwise
subjected to damage or stress.
Do not operate the charger or AC/DC adaptor with a damaged cord or plug. Replace
immediately.
Do not operate the charger or AC/DC adaptor if it has received a sharp blow, been
dropped, or otherwise damaged in any way; it should be inspected by qualified service
personnel.
Do not disassemble the charger or AC/DC adaptor; it should be repaired by qualified
service personnel. Incorrect reassembly may result in electric shock or fire.
To reduce risk of electric shock, unplug the charger or AC/DC adaptor from the outlet
before attempting any maintenance or cleaning.
An extension cord should not be used unless absolutely necessary. Use of an improper
extension cord could result in fire or electric shock. If an extension cord must be used,
make sure:
- The plug pins on the extension cord are the same number, size, and shape as those on
the charger or AC/DC adaptor.
- The extension cord is properly wired and in good electrical condition and that the
wire size is larger than 16 AWG.
•
•
•
xxvi
Do not expose the charger or AC/DC adaptor to rain or snow.
Do not use the charger if, after an overnight charge, any of the batteries feel warmer
than the charger housing. The charger should be inspected by qualified service
personnel.
Do not use the charger if any of the batteries or the charger get more than lukewarm. Do
not use the AC/DC adaptor if it gets more than lukewarm. The equipment should be
inspected by qualified personnel.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
INTRODUCTION
1
1.1 About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 7535 G2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.4 About The 7535 G2 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . . 7
1.4.1 The 7535 G2 Hand-Held Computer . . . . . . . . . . . . . . . . . . . . . . 8
1.4.2 Regulatory Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
1
2
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 1: Introduction
About This Manual
1.1
About This Manual
This manual describes how to configure, operate, and maintain the Psion Teklogix 7535 G2
Hand-held Computer.
Chapter 1: Introduction
provides a basic overview of the 7535 G2 computer.
Chapter 2: Basic Checkout
describes preparing the 7535 G2 ready for operation, including setting up
your radio.
Chapter 3: Getting To Know Your 7535 G2
describes the 7535 G2 features, outlines how to charge and maintain the battery,
describes the keyboard, display, using the internal scanner, etc.
Chapter 4: Windows Embedded CE 5.0
describes the Microsoft® Windows® Embedded CE 5.0 desktop and how to use
it, outlines the basics of moving around a Microsoft Windows Embedded CE 5.0
window, selecting and opening icons and files, and working with a dialog box.
Chapter 5: Configuration
describes the Microsoft Windows Embedded CE 5.0 Control Panel and how to
use it to configure the 7535 G2, along with attached scanners, and so on.
Chapter 6: Peripheral Devices & Accessories
describes the peripherals and accessories available for your 7535 G2 computer.
Chapter 7: Specifications
lists the specifications for your 7535 G2 computer, radio, scanner, and battery.
Appendix A: Port Pinouts
describes the 7535 G2 pinouts.
Appendix B: SCU For RA2041 802.11b/g Radio
provides details on the Summit Client Utility (SCU), which is used to configure
the Summit RA2041 802.11b/g Compact Flash radio module.
Appendix C: Bar Code Settings
details your bar code options.
Appendix D: Teklogix Imagers Applet
describes in detail your imager’s settings.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
3
Chapter 1: Introduction
Text Conventions
1.2
Text Conventions
Note: Notes highlight additional helpful information.
Important: These statements provide particularly important instructions or additional
information that is critical to the operation of the equipment.
Warning: These statements provide critical information that may prevent physical
injury, equipment damage or data loss.
1.3
7535 G2 Features
Rugged design:
•
•
Fully-sealed enclosure (rated to IP65). Totally protected against dust ingression. Protected from low pressure water jets from all directions.
Multiple 1.8m (6 ft.) drops or 26 drops from 1.5m (5 ft.) to concrete while powered on
and configured with accessories such as WiFi radio, scanner/imager, and pistol grip.
Processor and memory:
•
•
•
•
XScale PXA270 @ 520 MHz
32 KB instruction and 32 KB data cache
On-board RAM: 128 MB SDRAM
On-board ROM: 64 MB FLASH
Operating system:
•
Windows CE 5.0
Programming environment:
•
•
•
•
HTML, XML
Psion Teklogix Mobile devices SDK for CE
Java™, Embedded Visual C++, Microsoft Visual Studio® 2005
Standard CE APIs - MFC, ATL
Wireless communications:
•
4
IEEE 802.11 b/g Compact Flash Radio, operating in 2.4 GHz band (CCX Certified v.4)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 1: Introduction
7535 G2 Features
•
•
IEEE 802.11a/b/g Compact Flash Radio with integrated antenna, operating in 2.4 GHz
and 5 GHz bands
Bluetooth® radio 2.4 GHz (10 m range)
Application software:
•
•
•
•
Internet Explorer for Windows CE
Optimized for use with Open TekTerm (for details, see the TekTerm Software User Manual, P/N 8000073)
Wordpad
ActiveSync
Display:
•
•
•
•
•
•
•
320 x 240 (1/4 VGA) graphic colour TFT
8.9 cm (3.5 in.) diagonal portrait mode
64K displayable colours
Contrast control and automatic backlight
Sunlight readable (for outdoor use)
Optional monochrome screen
Optional non-touchscreen
Touchscreen:
•
•
•
•
Passive stylus or finger operation
Signature capture
Integral stylus holder
4-wire or high durability 5-wire technology options
Keyboards:
•
•
•
Automatic bright EL backlight
Ergonomically designed for left- or right-hand use
Dedicated function keys
Two formats available:
•
•
36-key large button numeric with a total of 20 function keys (10 direct-access)
58-key alpha with a total of 30 function keys (6 direct-access)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
5
Chapter 1: Introduction
7535 G2 Features
Indicators and controls:
•
•
Beeper with volume control
LEDs for radio transmit and receive, scanning, battery status, and user applications
Bar code applications:
•
•
•
•
Internal 1D & 2D scan engines: standard, long range, advanced long range, enhanced
standard range
Fuzzy logic internal scan engine
Internal 1.3 megapixel CMOS image capture scan engine
Supports decoded and undecoded tethered scanners
RFID applications:
•
Tethered 900 MHz RD7950 Integrated UHF RFID Reader
Internal expansion slots:
•
•
One SDIO/MMC slot 1G Industrial Card
One Type II Compact Flash slot
External ports:
Tether Port with:
•
•
•
RS-232 serial (decoded scanner, printer)
Undecoded scanner support
USB host
Docking station port with:
•
•
•
•
RS-232 serial with diagnostics
USB device
USB host
Power in/out
Power management:
•
•
•
•
•
6
Typical 8-hour usage lithium-ion standard battery
Quick swap packs
Advanced smart battery with gas gauge
Runs with battery, wall adaptor or cigarette lighter
Built-in fast charger (2 hours)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 1: Introduction
About The 7535 G2 Hand-Held Computer
•
•
System backup during battery swap (up to 20 minutes)
One week real-time clock backup
Network Management:
•
•
•
•
1.4
SNMP MIB 2 support
Remote software download
Remote WLAN management
Enhanced security for 802.11
About The 7535 G2 Hand-Held Computer
The 7535 G2 is a ruggedized hand-held personal computer, running the Microsoft Windows
CE 5.0 operating system. It is intended for use in commercial and light industrial applications with a focus on real time wireless data transactions. All possible bar code input
methodologies are supported by one of a variety of scanners available. Optimization for specific operational environments is supported with a wide range of peripheral options and
carrying accessories.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
7
Chapter 1: Introduction
The 7535 G2 Hand-Held Computer
1.4.1
The 7535 G2 Hand-Held Computer
Figure 1.1 7535 G2 With 58-Key Keyboard
Figure 1.2 7535 G2 Docking Port
8
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 1: Introduction
The 7535 G2 Hand-Held Computer
Figure 1.3 Tether Port
Figure 1.4 Scanner Window
Laser
Aperture
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
9
Chapter 1: Introduction
Regulatory Labels
1.4.2
Regulatory Labels
Figure 1.5 Laser Warning Label
This label is affixed below the scanner window.
Warning: Using controls or adjustments or performing procedures other than those
specified herein may result in hazardous radiation exposure.
Figure 1.6 LED Radiation Notice Label
This label is affixed below the scanner window.
10
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
2
BASIC CHECKOUT
2.1 Features Of The 7535 G2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 Preparing The 7535 G2 For Operation . . . . . . . . . . . . . . .
2.2.1 Equipment You Need To Get Started. . . . . . . . . . .
2.3 Powering Up The 7535 G2 . . . . . . . . . . . . . . . . . . . . .
2.3.1 Charging The Battery. . . . . . . . . . . . . . . . . . .
2.3.2 Installing The Battery And Switching The Computer On
2.4 Attaching Carrying Accessories . . . . . . . . . . . . . . . . . .
2.4.1 Attaching The Hand Strap . . . . . . . . . . . . . . . .
2.4.2 Attaching The Pistol Grip . . . . . . . . . . . . . . . .
2.5 Calibrating The Touchscreen . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
14
14
14
14
15
16
16
18
19
2.6 Configuring Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2.7 Configuring An IEEE 802.11 Radio In The Unit . . . . . .
2.7.1 Assigning An IP Address. . . . . . . . . . . . . .
2.7.2 Name Servers Tab . . . . . . . . . . . . . . . . .
2.7.3 Advanced Features . . . . . . . . . . . . . . . . .
2.7.3.1 Rearranging Preferred Networks . . . . .
2.7.3.2 Deleting A Preferred Network . . . . . .
2.7.3.3 Changing Network Properties. . . . . . .
2.8 Summit Client Utility (SCU) For RA2041 802.11b/g Radio
2.8.1 Assigning The IP Address . . . . . . . . . . . . .
2.8.2 Name Servers Tab . . . . . . . . . . . . . . . . .
2.8.3 Using The SCU To Connect To The WLAN. . . .
2.8.3.1 SSID . . . . . . . . . . . . . . . . . . . .
2.8.3.2 EAP Type . . . . . . . . . . . . . . . . .
2.8.3.3 Encryption. . . . . . . . . . . . . . . . .
2.9 Checking The Scanner . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
19
25
26
27
27
27
28
28
28
30
31
32
32
32
33
2.10 Data Transfer Between The 7535 G2 And A PC . . . . . . . . . . . . . . . . . . . 34
2.10.1 Using Microsoft ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . 34
2.10.2 Using Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
11
2.11 Resetting The 7535 G2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
12
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Features Of The 7535 G2
2.1
Features Of The 7535 G2
Figure 2.1 Front Of 7535 G2
7535 G2 Screen
Sound Port
Ambient Light Sensor
Tether Port
Docking Port
Figure 2.2 Back Of 7535 G2
Scanner Window
Warning Label
Stylus
Battery Pack
Tether Port
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
13
Chapter 2: Basic Checkout
Preparing The 7535 G2 For Operation
2.2
Preparing The 7535 G2 For Operation
Typically, 7535 G2 Hand-Held Computers are configured at the factory and arrive ready for
use. Although these computers are equipped with an internal Compact Flash and SD I/O
slot, these slots are not intended for user modification. If a device needs to be changed or
added in these slots, contact qualified Psion Teklogix personnel.
2.2.1
Equipment You Need To Get Started
You’ll need:
• A compatible battery charger, docking station or portable docking module (PDM)
with power supply.
• An operating wireless network (if you are not operating the equipment in
batch mode).
• A medium (#2) Phillips head screwdriver (if you need to attach a carrying strap or
pistol grip handle).
2.3
Powering Up The 7535 G2
Note: Psion Teklogix offers a Portable Docking Module (PDM) along with its power supply to help speed the checkout and confirmation process for your 7535 G2. The
PDM can power your computer with or without a battery installed in the unit. Refer
to Chapter 6: “Peripheral Devices & Accessories” for more information about
this accessory.
2.3.1
Charging The Battery
Important: The 7535 G2 uses a high capacity lithium-ion battery. It is critical that you
review the battery safety guidelines in “Lithium-ion Battery Safety Precautions” on page xxiv before charging the battery.
Batteries shipped from the factory are not charged. They must be fully charged prior to use.
Full capacity may not be reached until at least 5 full charge/discharge cycles have been performed. Batteries can be charged using a gang charger or the unit’s internal charger. When
using the internal charger, a suitable power source is required. All chargers and docking stations are described in Chapter 6: “Peripheral Devices & Accessories”.
14
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Installing The Battery And Switching The Computer On
Important: The 7535 G2 battery properties dialog box (see “Battery Capacity” on page
119) may indicate an incorrect battery capacity until the new battery has
been fully charged. It may take several charge/discharge cycles for the
battery capacity gauge to register capacity with the full 95% accuracy.
2.3.2
Installing The Battery And Switching The Computer On
Important: Always switch the unit off before changing the battery. While the battery is
being replaced, the 7535 G2 will save its current data for up to 20 minutes.
If you are not using a docking station or PDM:
• Slide the charged battery with the contoured plastic facing you into the unit. Click the
battery into place.
Figure 2.3 Installing The Battery
Note: If you are using a docking station, you can insert an uncharged battery, dock the
unit and switch it on.
If you are using a PDM, you can configure your unit without a battery, with a
charged battery, or with an uncharged battery.
If you are using a hand strap:
• Hook the bottom of the hand strap into the slot at the base of the battery.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
15
Chapter 2: Basic Checkout
Attaching Carrying Accessories
To switch the unit on:
• Press and hold down the [ENTER/ON] key for at least one second.
• When all four LEDs flash yellow, release the [ENTER/ON] button.
A splash screen displaying the Psion Teklogix logo and the Windows CE logo appears.
When Windows CE has successfully loaded, the startup desktop is displayed.
Note: The screen may go blank for a few seconds after the splash screen loading bar
reaches the end. This is part of the normal Windows CE cold boot process. The
desktop is displayed after a few moments.
2.4
Attaching Carrying Accessories
Psion Teklogix recommends that a carrying accessory—a hand strap, pistol grip or shoulder
strap—be installed on the 7535 G2 before use. If your computer is not fitted with a hand
strap or pistol grip, you can install either using the carrying accessory kit supplied.
You’ll need:
• A Phillips head screwdriver.
Important: Do not use adhesives such as Loctite to secure screws on carrying accessories. These chemicals may damage the plastic casing.
2.4.1
Attaching The Hand Strap
Two Phillips head screws are provided with the hand strap.
• Attach the strap to the two threaded inserts located at the back of the 7535 G2 near
the top of the unit (see Figure 2.4 on page 17).
16
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Attaching The Hand Strap
Figure 2.4 Attaching The Hand Strap
• Stretch the handstrap toward the base of the 7535 G2, and hook the bottom of the
handstrap into the slot near the base of the battery pack.
Figure 2.5 Hooking The Hand Strap In Place
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
17
Chapter 2: Basic Checkout
Attaching The Pistol Grip
2.4.2
Attaching The Pistol Grip
Note: A Phillips head screwdriver is required.
The pistol grip is attached to the back of the 7535 G2 using the four threaded inserts in the
upper part of the 7535 G2 casing. Four black #4-40 Phillips head screws are provided with
this accessory.
Note: Prior to installation, make sure the trigger mechanism is securely snapped into the
pistol grip body and that the trigger operates properly.
• Position the pistol grip so that it fits snugly over the back of the unit and
the inserts on the back of the computer are aligned with the holes in the pistol grip.
• Using a Phillips screwdriver, securely fasten the pistol grip to the back of the
7535 G2.
Figure 2.6 Attaching The Pistol Grip
18
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Calibrating The Touchscreen
2.5
Calibrating The Touchscreen
Note: Keep in mind that 7535 G2 Hand-Held Computers can be ordered with or without
touchscreens, and that the touchscreen function can be turned off (see “Touch” on
page 125).
If you have the 7535 G2 touchscreen feature, it is factory-calibrated and ready-to-go; however, over time the touchscreen's operating parameters may change, and it may need to be
recalibrated for correct operation. Refer to “Calibrating The Touchscreen” on page 51
for details.
2.6
Configuring Your Radio
Psion Teklogix provides two types of 802.11 Compact Flash (CF) wireless LAN radio cards
for the 7535 G2: the Motorola RA2043a/b/g radio and the Summit RA2041b/g radio. Both
models are Direct Sequence Spread Spectrum radios.
If your 7535 G2 is equipped with an RA2041 CF radio, follow the steps under “Summit
Client Utility (SCU) For RA2041 802.11b/g Radio” on page 28 to set up this type of radio
for communication with a wireless LAN.
If your computer is equipped with an RA2043 CF radio, follow the steps outlined under the
heading “Configuring An IEEE 802.11 Radio In The Unit”, below.
2.7
Configuring An IEEE 802.11 Radio In The Unit
The most common 802.11 settings are configured as defaults. However, there are some
fields that must be completed, including the SSID of your access point and the security
methods implemented in the network (including access keys).
Note: In most situations the configuration of your 802.11 radio will require parameters,
settings, and access keys from a network administrator.
Network administrators should review the detailed security information in this section in order to effectively configure the 802.11 wireless network.
Important: If the 7535 G2 is equipped with a radio that has never been configured, the
radio settings dialog box opens automatically when the unit is powered on.
In this case, skip to Step 4 on page 21.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
19
Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio In The Unit
To configure the 802.11 radio:
1. Tap on Start>Settings>Network and Dial-up Connections. (If the Start Menu isn’t
displayed in the taskbar, press [BLUE] [0] to display it.)
If you’re using the keyboard, press [BLUE] [0] to display the Start Menu. Use the
[DOWN] arrow key to highlight Settings. Press the [RIGHT] arrow key to display the
sub-menu. Highlight Network, and press [ENTER].
Figure 2.7 Network And Dial-Up Connections
2. Choose the radio icon to open the 802.11 Wireless LAN Settings window. In the
sample screen, this icon is labelled PTXCF8385P N1.
Figure 2.8 802.11 Wireless LAN Icon
20
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio In The Unit
3. Wireless Statistics Tab
When you choose the Wireless LAN icon, an 802.11 Wireless LAN Settings window
(PTXCF8385P N1 in the sample below) is displayed.
This tab lists your radio statistics. Choosing the Zero button resets the statistics of the
last four items: Packets IN, Packets OUT, IN errors and OUT errors.
• Display the next tab in this window, Wireless Information.
4. Wireless Information Tab
The options under this tab display existing networks to which you can connect, and it
allows you to add a new network or modify the settings for an existing network.
Configure button
• To change the settings in an existing network, highlight the network you want to
modify, and choose the Configure button to display the Wireless Properties dialog
box.
Connect button
• To force connection to a specific, existing network, highlight the network to which
you want your 7535 G2 to connect, and choose the Connect button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
21
Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio In The Unit
This tab lists available networks—any access points that are broadcasting an SSID, and
it lists preferred networks—networks that you have configured. Since access points are
generally secure, they will most likely not be listed here. By default, 7535 G2 attempts
to connect to preferred networks. This behaviour can be changed by enabling
Automatically connect to non-preferred networks in the Advanced Wireless Settings
dialog box (page 27).
• To add a new configuration, tap on the Add New button. A blank Wireless Properties
dialog box is displayed.
5. Wireless Properties
Network name (SSID)
• Type the appropriate SSID (Service Set Identifier) in the Network name (SSID) text
box at the top of this dialog box.
The Network name field can contain a maximum of 32 characters. The name assigned
here is listed as a preferred network.
22
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio In The Unit
Important: Keep in mind that the 7535 G2 will only communicate with access points
that are configured with the same SSID.
Ad Hoc And Infrastructure
If you are using an Infrastructure network—one in which 7535 G2s must pass data
through an access point—leave the checkbox next to This is an ad hoc network blank.
If you are using an Ad Hoc network—a network in which 7535 G2s pass data directly to
other 7535 G2s without an access point—highlight This is an ad hoc network, and add a
checkmark in the checkbox to enable Ad Hoc.
Encryption
WEP (Wired-Equivalent Privacy) encryption prevents others from accidentally accessing your network. If you are not using encryption, you can choose Disabled from the
drop-down encryption menu. Otherwise, leave this field as is.
Note: WEP cannot be disabled if you are using WPA or WPA-PSK authentication.
TKIP (Temporal Key Integrity Protocol) is an encryption protocol included as part of
the IEEE 802.11 standard for wireless LANs. Designed to enhance WEP, TKIP uses the
original WEP encryption but ‘wraps’ additional code at the beginning and end to encapsulate and modify it, encrypting each data packet with a unique encryption key.
Authentication
802.11 supports four subtypes of network authentication services: Open, Shared, WPA,
and WPA-PSK. Under Open authentication, any wireless station can request authentication. The station that needs to authenticate with another wireless station sends an
authentication management frame that contains the identity of the sending station. The
receiving station then sends back a frame that indicates whether it recognizes the identity of the sending station.
Under Shared authentication, each wireless station is assumed to have received a secret
shared key over a secure channel that is independent from the 802.11 wireless network
communications channel.
Under WPA and WPA-PSK authentication, the use of 802.1x authentication is required.
For wireless networks without a Remote Authentication Dial-In User Service
(RADIUS) infrastructure, WPA supports the use of a preshared key. For wireless networks with a RADIUS infrastructure, Extensible Authentication Protocol (EAP) and
RADIUS is supported.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
23
Chapter 2: Basic Checkout
Configuring An IEEE 802.11 Radio In The Unit
Network Key
This text box is used to specify a 5 or 13 ASCII character sequence or an equivalent 10
or 26 Hexadecimal digit sequence that matches the active WEP key on the access point.
• To assign a Network key, highlight The key is provided automatically, and uncheck
the checkbox to disable this option.
Figure 2.9 Accessing Network Key And Key Index
Disable this option to
access Network Key &
Key Index fields.
Key Index
This field is used to identify the WEP key.
• Enter a value from 1 to 4.
Enable 802.1x Authentication
802.1X is the IEEE standard that offers additional security for local area networks. It
provides authentication for user devices attached to an Ethernet network, whether wired
or wireless. A security protocol packet such as TLS or MD5 encapsulated in an EAP is
used in conjunction with the 802.1X standard to authenticate users at the MAC layer.
Available EAPs are listed in the drop-down menu next to the EAP option.
• To activate 802.1X, highlight 802.1x authentication, and check the checkbox.
EAP Type (Extensible Authentication Protocol)
This drop-down menu lists the EAP types available on your system. The items in this down menu will vary depending on your network setup. Keep in mind also that some
authentication protocols require that you select a Certificate. By selecting the Properties
button, you will be able to select a Certificate. “Certificates” on page 97 outlines how to
create certificates for your network.
24
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Assigning An IP Address
Saving and exiting the radio setup. Once you have completed the configuration, press
[ENTER] or tap on OK.
The connection you created will be listed in the Wireless Information tab as a preferred
network. The radio will search for the SSID and will compare the WEP and authentication information you specified. If there is a match between your computer settings and
the access point settings, the computer will communicate on the network through the
access point.
2.7.1
Assigning An IP Address
If your network is not using a DHCP server, you will need to assign an IP address.
• In the PTXCF8385P N1 Settings window, tap on the IP Information tab.
Note: Choosing the Renew button forces the 7535 G2 to renew or find a new IP address.
This is useful if, for example, you are out of communication range for a longer
period of time and your 7535 G2 is dropped from the network.
To define a static IP address:
• Tap on the Configure button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
25
Chapter 2: Basic Checkout
Name Servers Tab
Figure 2.10 Defining An IP Address
• Tap the stylus on the radio button next to Specify an IP address to select it.
• Type an IP, Subnet Mask and Default Gateway address in the appropriate fields. Press
[ENTER] to save your information.
2.7.2
Name Servers Tab
Note: If DHCP is enabled, name server addresses are assigned automatically.
• In the PTXCF8385P N1 Settings window, display the IP Information tab.
• In the IP Information tab, tap on the Configure button.
• Display the Name Servers tab.
26
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Advanced Features
The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS
and DNS resolvers. The format for these fields is ###.###.###.###.
2.7.3
Advanced Features
To display the Advanced Wireless Settings dialog box:
• Tap the Advanced button in the Wireless Information tab.
This window lists the available preferred networks.
2.7.3.1 Rearranging Preferred Networks
The 7535 G2 attempts to connect with the networks listed in this dialog box in sequence, beginning at the top of the list. If you need to rearrange this list of networks, move networks up
and down in the list:
• Move the cursor into the networks list, and highlight the network that you want to
move up or down in the list.
- To move the highlighted item in the list upward or downward, tap on the Up or
Down button.
2.7.3.2 Deleting A Preferred Network
To delete a network from this list:
• In the networks list, highlight the network that you want to remove.
• Tap on the Delete button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
27
Chapter 2: Basic Checkout
Summit Client Utility (SCU) For RA2041 802.11b/g Radio
2.7.3.3 Changing Network Properties
To change the properties of an existing preferred network:
• Highlight the network that you want to modify.
• Tap on the Properties button.
• Make any necessary changes in the Wireless Properties dialog box, and press
[ENTER] to save the changes.
2.8
Summit Client Utility (SCU) For RA2041 802.11b/g Radio
This section describes the Summit Client Utility (SCU). The SCU provides the utilities you
will need to configure the RA2041 802.11b/g Compact Flash radio module so that it can
communicate through a wireless LAN effectively and securely.
2.8.1
Assigning The IP Address
Before launching the SCU, you need to configure how the IP address will be obtained. If
your network is not using a DHCP server, you will need to assign an IP address.
1. Tap on Start>Settings>Network and Dial-up Connections. (If the Start Menu isn’t
displayed in the taskbar, press [BLUE] [0] to display it.)
If you’re using the keyboard, press [BLUE] [0] to display the Start Menu. Use the
[DOWN] arrow key to highlight Settings. Press the [RIGHT] arrow key to display the
sub-menu. Highlight Network, and press [ENTER].
2. Choose the Summit WLAN Adapter icon to open the 802.11 Wireless LAN Settings window. In Figure 2.11, this icon is labelled SDCCF10G1.
Figure 2.11 Summit WLAN Adapter Icon
28
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Assigning The IP Address
The Summit WLAN Adapter Settings menu is displayed (In this screen shown as the
SDCCF10G1 menu).
3. Tap on the IP Information tab.
Note: Choosing the Renew button forces the 7535 G2 to renew or find a new IP address.
This is useful if, for example, you are out of communication range for a longer
period of time and your 7535 G2 is dropped from the network.
4. To define a static IP address, tap on the Configure button. The Summit WLAN
Adapter Settings menu provides two options:
• Tap on Obtain an IP address via DHCP to have an address assigned automatically,
or
• If you want to use a particular IP address, tap on Specify an IP address, and type the
preferred address as well as the IP, Subnet Mask and Default Gateway addresses in
the appropriate fields. Tap OK to save your information.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
29
Chapter 2: Basic Checkout
Name Servers Tab
2.8.2
Name Servers Tab
Note: If DHCP is enabled, name server addresses are assigned automatically.
• In the SDCCF10G1 window, display the IP Information tab.
• In the Summit WLAN Adapter Settings>IP Information tab, tap on the
Configure button.
• Display the Name Servers tab.
30
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Using The SCU To Connect To The WLAN
The DNS and WINS fields in the Name Servers tab allow you to specify additional WINS
and DNS resolvers. The format for these fields is ###.###.###.###.
2.8.3
Using The SCU To Connect To The WLAN
This section provides a quick set of steps to create a profile. Detailed information about each
of the SCU tabs—Main, Profile, Status, Diags and Global—is provided in Appendix B:
“SCU For RA2041 802.11b/g Radio”. To launch the SCU so that your 7535 G2 can connect
to a wireless LAN:
To launch the SCU so that your 7535 G2 can connect to a wireless LAN:
1. Tap on Start>Programs, and then tap on the SCU icon.
Figure 2.12 SCU Main Tab
2. Tap on the Profile tab.
• Tap on the New button to define a new profile.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
31
Chapter 2: Basic Checkout
Using The SCU To Connect To The WLAN
• Type a name using any alpha-numeric combination to uniquely identify this profile.
• Tap on OK to return to the Profile tab.
• Tap on Commit to save the profile name.
• When a pop-up message indicates that your configuration will be saved, tap on OK.
2.8.3.1 SSID
To configure the SSID for the network to which you want to associate:
• Type an SSID in the text box to the right of SSID. This field is limited to
32 characters.
• Tap on Commit and then, in the pop-up message, tap on OK to save your
SSID setting.
Important: To learn more about the other options available in the radio attributes list,
refer to “Profile” on page B-4.
2.8.3.2 EAP Type
• Tap on the EAP type drop-down menu, and choose the appropriate type of authentication—LEAP, EAP-FAST, PEAP-MSCHAP, and PEAP-GTC.
• Next, tap on the Credentials button, and type credentials for IEEE 802.1X
EAP types.
Important: Refer to “SCU Security Capabilities” on page B-6 for details about security
settings. Additional EAP details are described in “EAP Credentials” on
page B-7.
2.8.3.3 Encryption
• Tap on the Encryption drop-down menu, and choose the appropriate type of encryption—Manual WEP, Auto WEP, WPA PSK, WPA TKIP, WAP2 PSK, WAP2 AES,
CCKM TKIP, CKIP Manual, or CKIP Auto.
If you choose Manual WEP, WPA PSK or WPA PSK:
• Tap on the WEP/PSK Keys button. For Manual WEP, choose up to four static WEP
keys. For PSK, type an ASCII passphrase or hex PSK.
• Configure any other settings that are supplied by the network administrator for the
SSID to which you will associate.
• Make certain that you tap on Commit following each change.
32
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Checking The Scanner
Once you’ve completed the configuration:
• Tap the Main tab. Tap on the Active Profile button – your new profile will be listed
in the drop-down menu.
When you tap on the profile you created, the 802.11a/b/g radio module attempts to connect
to the network using the following steps:
- Associate to the SSID.
- Authenticate to the network.
- If EAP authentication is being used, derive dynamic encryption keys.
- If DHCP is being used by the network, obtain an IP address.
If the radio is not connecting properly:
• Tap on the Status tab.
The Status dialog box lists the IP and MAC addresses, and indicates the current state of the
radio, the signal strength, channel and so on.
You can go to the Diags tab for DHCP renewal, ICMP Echo Requests (Pings), and
diagnostics.
Important: For details about the Status dialog box, refer to page B-9 of Appendix B:
SCU For RA2041 802.11b/g Radio.
2.9
Checking The Scanner
Note: Details about operating and troubleshooting scanners and RFID readers are provided under the heading “Internal Scanners” on page 58.
If your 7535 G2 is equipped with an internal scanner, you can test it to ensure that it is operating properly. Point the scanner window at a bar code that your scanner was designed to
decode—for example, a 1D UPC bar code or 2D bar code. Press the SCAN button or pistol
trigger, and check for a valid decode on the computer’s screen.
Performance is improved if you disable all unneeded bar codes in the Bar Codes screen.
Review Appendix C: “Bar Code Settings” for details about bar codes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
33
Chapter 2: Basic Checkout
Data Transfer Between The 7535 G2 And A PC
2.10
Data Transfer Between The 7535 G2 And A PC
Data transfer options vary slightly depending on the type of operating system installed in
your PC.
For Windows XP SP2 operating systems or earlier, Microsoft® ActiveSync® is PC connectivity software that can be used to connect your 7535 G2 to PCs running this software.
If the Windows Vista® operating system is installed in your PC, ActiveSync is not required
to transfer data between your 7535 G2 and your PC.
By connecting the 7535 G2 to a PC with a cable you can:
•
•
•
View 7535 G2 files from Windows Explorer.
Drag and drop files between the 7535 G2 and the PC in the same way that you would
between PC drives.
Back up 7535 G2 files to the PC, then restore them from the PC to the hand-held again,
if needed, and so on.
2.10.1 Using Microsoft ActiveSync
To install ActiveSync, follow the step-by-step instructions provided with the program’s
setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
Note: When you use an RS-232 serial port to connect devices like the 7535 G2 to your
desktop computer, the connection may not succeed because ActiveSync has trouble
connecting at non-default baud rates.
To workaround this problem, set the ActiveSync baud rate on the desktop to use the
same baud rate as the device. You can set the baud rate by editing the registry on the
desktop host computer, as detailed in the steps outlined at the following website:
http://support.microsoft.com/kb/324466
2.10.2 Using Windows Vista
If you have Windows Vista, your 7535 G2 data transfers do not require ActiveSync. To
transfer data between your PC and your 7535 G2:
•
•
34
Tap on Start>Computer to display the drives. Your 7535 G2 will be visible here.
Open drives, files and folders as you would on your PC.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Resetting The 7535 G2
2.11
Resetting The 7535 G2
To perform a Warm or Cold reset, you can access the menu by going to Start>Shutdown. Alternatively you can use the keyboard shortcuts described below.
Warm Reset
To execute a warm reset:
• Press and hold down the [BLUE] key and the [ENTER/ON] key simultaneously for a
minimum of six seconds.
A warm reset closes open applications; any unsaved data are lost. Installed programs and
saved data are preserved.
Note: You do not need to reset your 7535 G2 after configuring the radio.
Cold Reset
Important: A cold reset returns the 7535 G2 to factory settings.
To execute a cold reset and access the BooSt menu:
• Press and hold down the [BLUE] key, the [ENTER] key, and the [SCAN] key, simultaneously for a minimum of six seconds.
After a cold reset, the BooSt menu appears.
• Type 1 to “Run Main OS” (continue loading the Windows CE operating system).
• If you want a clean start, type ! (that is, the [SHIFT] key and 1). All data and settings
are lost. Files and data stored in flash are preserved.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
35
3
GETTING TO KNOW YOUR 7535 G2
3.1 The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1.1 Battery Safety . . . . . . . . . . . . . . . . . . . .
3.1.2 Removing And Installing The Battery Pack . . . . .
3.1.3 Battery Chargers . . . . . . . . . . . . . . . . . . .
3.1.4 Monitoring The Battery And Maximizing Run Time
3.1.4.1 Storing Batteries. . . . . . . . . . . . . . .
3.2 Switching The Hand-Held On And Off . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
39
39
39
40
41
42
43
3.3 The Keyboard. . . . . . . . . . . . . . . . . . . . .
3.3.1 Modifier Keys . . . . . . . . . . . . . . .
3.3.1.1 Activating Modifier Keys . . . . .
3.3.1.2 Locking Modifier Keys . . . . . .
3.3.2 The Keys . . . . . . . . . . . . . . . . . .
3.3.3 Function Keys, Softkeys And Macro Keys
3.3.4 Alphanumeric Keyboard: 58-Key . . . . .
3.3.5 Numeric Keyboard: 36-Key . . . . . . . .
3.3.6 The Keypad Backlight . . . . . . . . . . .
3.4 The Display. . . . . . . . . . . . . . . . . . . . . .
3.4.1 Adjusting The Display Backlight . . . . .
3.4.2 Adjusting The Contrast. . . . . . . . . . .
3.4.3 Calibrating The Touchscreen . . . . . . . .
3.5 7535 G2 Indicators . . . . . . . . . . . . . . . . . .
3.5.1 LEDs . . . . . . . . . . . . . . . . . . . .
3.5.1.1 Charge LED . . . . . . . . . . . .
3.5.1.2 Radio Traffic LED . . . . . . . .
3.5.1.3 Scan LED . . . . . . . . . . . . .
3.5.1.4 User Application LED . . . . . .
3.5.2 Onscreen Indicators . . . . . . . . . . . .
3.5.3 Audio Indicators . . . . . . . . . . . . . .
3.5.3.1 Adjusting The Beeper Volume . .
3.6 Internal Scanners . . . . . . . . . . . . . . . . . . .
3.6.1 Scanning Techniques . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
43
44
44
45
45
46
48
48
50
50
50
51
51
52
52
53
53
54
54
54
57
57
58
59
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
37
3.6.2 Scan LED Indicators . . . . . . . . . . . . . . . . . . . . .
3.6.3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .
3.6.4 Operating One Dimensional (1D) Internal Laser Scanners . .
3.6.5 Operating Internal PDF Laser Scanners. . . . . . . . . . . .
3.6.6 Operating Internal Two Dimensional (2D) Imager Scanners .
3.6.7 Operating RFID/Scanner Modules . . . . . . . . . . . . . .
3.7 Connecting And Disconnecting Tethered Peripherals . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 59
. 60
. 60
. 60
. 61
. 62
. 62
3.8 Monitoring The Network Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 63
3.9 Uploading Data In A Docking Station . . . . . . . . . . . . . . . . . . . . . . . . . 64
3.10 General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
3.10.1 Caring For The Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . 64
3.10.2 Cleaning The 7535 G2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
38
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
The Battery
3.1
The Battery
The hand-held operates with a lithium-ion battery pack. Preparing the unit for operation requires that a battery pack be charged and installed in the 7535 G2.
3.1.1
Battery Safety
Important: Before attempting to install, use or charge the battery pack, it is critical that
you review and follow the important safety guidelines in the section entitled
“Lithium-ion Battery Safety Precautions” on page xxiv
3.1.2
Removing And Installing The Battery Pack
Important: Always switch the unit off before changing the battery. If you do not turn
the hand-held off before removing the battery, it may be necessary to reboot
the unit. Any active sessions may be lost. While the battery is being
replaced, the 7535 G2 will save its current data for up to 20 minutes.
Removing The Battery Pack
•
•
If your unit is equipped with a hand strap, unhook it from the base of the battery.
Press down the release tab at the top of the battery, and slide the battery out.
Note: If your hand-held is equipped with a battery contact protective gasket
(P/N 1020250), to remove the battery, you will need to hold the 7535 G2 face down
with both hands, making certain that your fingers are not touching the keypad.
Press down firmly on the battery release with both thumbs and slide the battery out.
Installing The Battery Pack
To install the battery pack:
•
Slide the battery pack with the contoured plastic facing you into the 7535 G2. Click the
battery into place.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
39
Chapter 3: Getting To Know Your 7535 G2
Battery Chargers
Figure 3.1 Installing The Battery Pack
•
3.1.3
If your computer is equipped with a hand strap, insert the hook at the end of the hand
strap into the slot at the base of the battery.
Battery Chargers
Important: FOR DETAILED INFORMATION about chargers and docking stations,
refer to Chapter 6: “Peripheral Devices & Accessories”. For battery safety,
refer to “Lithium-ion Battery Safety Precautions” on page xxiv.
All batteries must be charged before use. The battery can be charged with a variety of chargers. These include:
•
•
•
•
40
6-Unit Gang Charger (Model #HU3006): charges up to six lithium-ion batteries at
one time.
Portable Docking Module (Model #HU4001 or HU1005 and HU3220): charges the
7535 G2 battery (with the battery installed in the unit).
Combo Charger (Model #HU3002): a desktop charger that charges the internal battery
along with a spare battery pack.
Combo Docking Station (Model #HU4002): operates as both a charger and a docking
station. Operating as a charger, both the battery installed in the computer and a spare
battery can be charged simultaneously.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Monitoring The Battery And Maximizing Run Time
•
Quad Docking Station (Model #HU4004): can charge the battery of up to four handhelds inserted in the docking station while transferring data through an Ethernet
connection.
• Powered Cradle (Model # HU1010): can charge the hand-held with the battery installed
in the hand-held.
It can take from 1.5 to 4 hours to charge a battery. The unit’s intelligent charging system protects the battery from over-charging by terminating the charge process when the battery is at
maximum capacity.
Note: Refer to “Monitoring The Battery And Maximizing Run Time” on page 41 for additional information about the battery.
Important: To avoid damaging the battery, chargers will not begin the charge process
until the battery temperature is between 0° C (32° F) and 39° C (102° F). If
the battery is too hot or cold, the battery status LED flashes yellow and the
charge is suspended. Refer to Table 3.1: “Charge LEDs” on page 53 for
details.
3.1.4
Monitoring The Battery And Maximizing Run Time
Under normal operating conditions, fully charged batteries last for 8 hours. As lithium-ion
batteries age, their capacity decreases gradually, and they are generally considered depleted
after approximately 2 years of use (less than 60% of original capacity remaining). Keep in
mind however that heavy usage or operating the 7535 G2 at temperature extremes will
shorten the battery life.
Lithium-ion batteries do not require conditioning cycles and the 7535 G2 battery system (including chargers) requires no user interaction to maintain peak performance.
To maximize the run time of your batteries, consider the following:
•
•
The display backlight is the largest drain on the battery. Try to keep its brightness as low
as possible. Adjusting the keyboard backlight also helps.
The hand-held is ‘event’ driven. That is, when the unit is not in use, it reverts to sleep
mode (even when it appears to be running), saving battery power. Events include a key
press, touchscreen taps and scan triggers. Power consumption is reduced if you avoid
unnecessary events, and allow the unit to sleep as much as possible.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
41
Chapter 3: Getting To Know Your 7535 G2
Monitoring The Battery And Maximizing Run Time
•
The hand-held battery is a ‘smart battery’ with built-in intelligence. The taskbar battery
icon is a linear gauge used to estimate the remaining run time of the battery. It is important to note that the battery capacity icon displays quarter percentages of nominal
capacity (the capacity of a new battery). An aged battery, even when fully charged,
shows somewhat less capacity than nominal.
Double-tapping on the battery icon displays a dialog box that provides detailed information
about the battery status and performance. If the remaining capacity indication seems inaccurate, the battery may need recalibration. Recalibration requires that the battery be fully
charged, discharged and then charged again before use. If the battery is fully discharged and
charged on a regular basis, recalibration should not be necessary.
•
•
When the hand-held is switched off, it goes into a low-power, suspend state but continues to draw a small amount of power from the battery. This should not be an issue unless
the unit is left in suspend state for more than a week—in this case, the battery should be
removed.
Batteries left unused for durations of more than one or two months should be fully
charged, operated in the hand-held until the battery is empty (i.e. the low battery
warning appears), and then charged again before use. This recalibrates the gas gauge
and allows the internal electronics to determine the actual capacity of the battery. See
“Battery Gas Gauge Calibration” on page 180 for a detailed discussion of battery
calibration.
3.1.4.1 Storing Batteries
Long term battery storage is not recommended. If storage is necessary:
•
•
•
•
•
42
Always try to use a ‘first-in first-out’ approach to minimize storage time.
Lithium-ion batteries age much faster at elevated temperatures. Store batteries at temperatures between 0° C and 20°C.
Always charge batteries to 40 to 60% before storing them. Batteries can be damaged by
an over-discharge phenomenon that occurs when an empty battery is stored for a long
period of time such that the cell voltage drops below a lower limit.
To minimize storage degradation, recharge stored batteries to 40 to 60% every 4 or 6
months to prevent over-discharge damage.
A ‘never used’ Li-Ion battery that has been stored for 3 years may have limited or no
useful life remaining once put into service. Think of batteries as perishable goods.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Switching The Hand-Held On And Off
3.2
Switching The Hand-Held On And Off
Switching On The Unit
•
•
Press and hold down the [ENTER/ON] key for at least one second.
When all four LEDs flash yellow, release the [ENTER/ON] button.
Note: If the 7535 G2 is in suspend state, pressing [ENTER/ON] key ‘wakes’ the unit from
this state. The screen in which you were working before the computer entered suspend state is displayed.
Switching Off The Unit
Important: Keep in mind that turning off the 7535 G2 does not result in a complete
reboot; rather, the unit enters a power-saving, “suspend” state. When the
7535 G2 is turned on from suspend state, operation resumes within a
few seconds.
To switch off the 7535 G2:
•
Press the [BLUE] key, and then press the [ENTER/ON] key.
Important: If the word ‘BLUE’ is displayed in uppercase in the taskbar area at the
bottom of the screen, this key is locked “on” and the 7535 G2 will not
switch off. Press the [BLUE] key twice followed by [ENTER/ON] to switch
the 7535 G2 off.
If, however, you’ve disabled the “Blue Key” in the ‘One Shot’ dialog box
(see “Keyboard One Shot Modes” on page 106), the 7535 G2 can be turned
off even when the [BLUE] key is locked ‘on’.
3.3
The Keyboard
The 7535 G2 offers two types of keyboard layouts: a 58-key keyboard and a 36-key, large
button keyboard. Most of the keys on these keyboards operate much like a desktop computer. Where a key or key function is not consistent with the PC keyboard, the differences
are noted.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
43
Chapter 3: Getting To Know Your 7535 G2
Modifier Keys
The [BLUE] and [ORANGE] modifier keys provide access to additional keys and system
functions. These functions are colour coded in orange and blue print above the keyboard
keys.
36-KEY KEYBOARD
3.3.1
58-KEY KEYBOARD
Modifier Keys
The [SHIFT], [CTRL], [ALT], [BLUE] and [ORANGE] keys are modifier keys. Pressing a
modifier key changes the function of the next key pressed. For example, on a 7535 G2 58key keyboard, a square bracket is printed in orange print above the [4] key. Pressing the
[ORANGE] key followed by the [4] key displays a square bracket rather than the number 4.
The [SHIFT], [CTRL] and [ALT] keys operate much like a desktop keyboard except that
they are not chorded (two keys held down simultaneously). The modifier key must be
pressed first followed by the key whose function you want modified.
3.3.1.1 Activating Modifier Keys
When a modifier key is pressed once, it is displayed in lowercase letters in the taskbar at the
bottom of the hand-held screen. For example, if the [CTRL] key is pressed, ctrl key is displayed at the bottom of the unit screen. Once the next key is pressed, the modifier key
becomes inactive and disappears from the taskbar.
44
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
The Keys
3.3.1.2 Locking Modifier Keys
When a modifier key is pressed twice, it is ‘locked’ on. A ‘locked’ modifier key is displayed
in uppercase letters in the taskbar. For example, pressing the [BLUE] key twice locks it
on—it is displayed as BLUE KEY in the taskbar at the bottom of the computer screen.
The locked modifier key will remain active until it is pressed a third time to unlock or turn it
off. Once a modifier key is unlocked, the uppercase representation at the bottom of the
screen is no longer displayed.
Note: The locking function of the [ORANGE] and [BLUE] keys can be disabled so that
pressing either of these keys once will lock the keys ‘on’.
If you disable the ‘One Shot’ function of either of these keys, pressing the [BLUE]
and/or [ORANGE] key once will lock the key ‘on’. Pressing the same key a second
time will unlock or turn it ‘off’. Refer to “Keyboard One Shot Modes” on page 106
for details.
3.3.2
The Keys
The [SHIFT] Key
The [SHIFT] key is used to display uppercase alpha characters and provide access to the
symbols above the numeric keys.
The Arrow Keys
The Arrow keys move the cursor around the screen in the direction of the arrow: up, down,
left and right. The cursor is the flashing box or underline character that indicates where the
next character you type will appear.
The [BKSP/DEL] Key
The [BKSP] key (sometimes referred to as destructive backspace) moves the cursor one
character to the left, erasing the incorrectly entered key stroke.
The [DEL] key ([BLUE] [BKSP]) erases the character at the cursor position.
The [CTRL] And [ALT] Key
The [CTRL] and [ALT] keys modify the function of the next key pressed and are application
dependent.
The [TAB] Key
Typically, the [TAB] key moves the cursor to the next field to the right or downward.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
45
Chapter 3: Getting To Know Your 7535 G2
Function Keys, Softkeys And Macro Keys
The [ESC] Key
Generally, this key is used as a keyboard shortcut to close the current menu, dialog box or
activity and return to the previous one.
The [SPACE] Key
Pressing this key inserts a blank space between characters. In a Windows dialog box, pressing the [SPACE] key enables or disables a checkbox.
The [SCAN] Key
Pressing the [SCAN] key—the yellow key with the star-burst scan symbol on it—activates
the scanner beam while pressed. For units that do not have internal scanners, this key can be
re-mapped to another function.
3.3.3
Function Keys, Softkeys And Macro Keys
In addition to the standard keyboard functions (see “The Keyboard” on page 43), The
7535 G2 supports function keys, softkeys and macro keys.
3.3.3.1 Function Keys
58-Key Keyboard Function Keys
The 7535 G2 58-key keyboard is equipped with thirty function keys. Function keys [F1] to
[F6] are located across the top of the keyboard and are directly accessible, a key combination is not required. Function keys [F7] to [F30] are colour coded in blue print above the
alpha keys and are accessed using a key combination, [BLUE] followed by the appropriate
alpha key.
To access function keys [F7] to [F30]:
•
Press the [BLUE] key followed by the alpha key to which the function key you want to
use is mapped. For example:
- To access function key [F7], press [BLUE] [C].
- To access function key [F8], press [BLUE] [D], and so on.
36-Key Keyboard Function Keys
The 36-key keyboard is equipped with thirty function keys. Function keys [F1] to [F4] are
located across the top of the keyboard and function keys [F5] to [F10] are located at the
bottom of the keyboard.
Additional function keys, [F11] to [F20], are colour coded in orange print above function
keys [F1] to [F10].
46
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Function Keys, Softkeys And Macro Keys
To access function keys [F11] to [F20]:
•
Press the [ORANGE] key followed by the appropriate function key. For example:
- To access function key [F11], press the [ORANGE] key followed by [F1].
- To access function key [F12], press [ORANGE] followed by [F2], and so on.
To access function keys [F21] to [F30], you’ll need to press [SHIFT] [F1] to [F10]:
•
Press the [SHIFT] key followed by the appropriate function key. For example:
- To access function key [F21], press the [SHIFT] key followed by [F1].
- To access function key [F22], press [SHIFT] followed by [F2], and so on.
3.3.3.2 Macro Keys
Important: Refer to “Keyboard Macro Keys” on page 107 for details about creating
macros.
7535 G2 hand-helds are equipped with a series of macro keys that can be programmed to
replace frequently used keystrokes, along with the function of executable keys like the
[ENTER] key, the [BKSP] key, any function key and arrow key, and so on.
Alphanumeric Keyboard Macro Keys
Alphanumeric (58-keys) keyboards have twelve macro keys: [M1] to [M12]. These keys are
colour coded in orange print above alpha keys [O] to [Z].
To access a macro key:
•
Press the [ORANGE] key followed by the appropriate alpha key from O to Z. For
example:
- To access macro key [M1], press [ORANGE] [O].
- To access macro key [M2], press [ORANGE] [P], and so on.
Numeric Keyboard Macro Keys
Numeric keyboards (36-keys) are equipped with six macro keys: [M1] to [M6]. Macro keys
[M1] to [M2] are directly accessible in the bottom row of the keyboard—a key combination
is not required.
Macro keys [M3] and [M4] are colour coded in orange print above macro keys [M1]
and [M2].
•
To access [M3], press the [ORANGE] key followed by [M1].
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
47
Chapter 3: Getting To Know Your 7535 G2
Alphanumeric Keyboard: 58-Key
• To access [M4], press [ORANGE] [M2].
Macro keys [M5] to [M6] are colour coded in blue print above macro keys [M1] and [M2].
•
•
3.3.4
To access [M5], press the [BLUE] key followed by [M1].
To access [M6], press [BLUE] [M2].
Alphanumeric Keyboard: 58-Key
In addition to alphanumeric keys that are directly accessible on the keyboard (no key combination is required) and the keys described in this chapter, the 58-key keyboard also provides
function keys and macro keys.
Function keys [F1] through [F24] can be used with the CE operating system or another application. The additional function keys, [F25] through [F30] along with the macros, are not
used as part of the Windows CE operating system.
All function keys and macro keys can be custom defined for each application. The TekTerm
application utilizes these keys (for detailed information, see the TekTerm Software User
Manual, P/N 8000073). Refer to “Function Keys, Softkeys And Macro Keys” on page 46
for details about accessing function keys [F25] to [F30].
3.3.5
Numeric Keyboard: 36-Key
On 36-key 7535 G2s, all alpha characters are printed on the unit plastic in orange typeface
above the numeric keys. An indicator in the left corner of the taskbar displays the currently
selected character. To access an alpha character, first press the [ORANGE] key and then
press the numeric key above which the alpha character you want to type is printed.
Choosing A Single Alpha Character
Note: The following examples assume that the [ORANGE] key is enabled as ‘Lock’ mode
in the ‘One Shot’ screen (accessible through the Control Panel Keyboard icon). In
‘Lock’ mode, pressing the [ORANGE] key once locks it ‘on’. Refer to “Keyboard
One Shot Modes” on page 106 for details.
The examples below illustrate how to access A, B and C, all of which are printed in orange
characters above the numeric key, [2].
To choose the letter ‘a’:
•
•
48
Press the [ORANGE] key, and press the numeric key [2].
Press the [ORANGE] key again to unlock or turn it off.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Numeric Keyboard: 36-Key
To choose the letter ‘b’:
• Press the [ORANGE] key, and press [2] twice.
• Press the [ORANGE] key again to unlock or turn it off.
To choose the letter ‘c’:
•
•
Press the [ORANGE] key, and press [2] three times.
Press the [ORANGE] key again to unlock or turn it off.
Creating Uppercase Letters
To display a capital letter:
•
Press the [ORANGE] key and then the [SHIFT] key before typing the alpha character.
Note: If you want to use uppercase characters at all times, press [BLUE] [SHIFT]. An
icon of an uppercase ‘A’ is displayed in the taskbar indicating that all letters will be
displayed as uppercase characters.
Choosing Multiple Characters From The Same Key
If you need to choose more than one alpha character from a single key, you’ll need to press
the Accept key between alpha selections. The Accept key is presented as an arrow Þ symbol
above the 0 (zero) key.
For example, suppose you want to type the letters ‘a’, ‘b’ and ‘c’. These letters are all accessible from the numeric key, [2].
To type the letter ‘a’:
•
•
Press the [ORANGE] key, and then press the numeric key, [2].
Press the Accept key [Þ] (zero key) to indicate that the letter ‘a’ should be accepted and
that another letter from the same key will be chosen.
To type the letter ‘b’:
• Press the [2] key twice, and press [Þ] to accept the letter ‘b’.
To type the letter ‘c’:
• Press the [2] key three times.
When you have completed your alpha selections from this key, you can do one of the
following:
•
•
If you want to choose additional alpha characters from another key(s), leave the
[ORANGE] key ‘on’, and press the numeric key with the alpha character you require, or
If you do not want to choose any additional alpha characters, press [ORANGE] again to
unlock or turn ‘off’ the key and end alpha selection.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
49
Chapter 3: Getting To Know Your 7535 G2
The Keypad Backlight
Choosing Multiple Characters From A Range Of Keys
If you plan on choosing alpha characters from a number of different keys, you are not required to press the Accept [Þ] key after each alpha selection. The [Þ] key is only required
when you are choosing more than one alpha character from the same key, e.g. ‘a’, ‘b’ and ‘c’
from the [2] key.
Suppose you want to type the letters ‘a’, ‘d’ and ‘g’. These alpha characters are accessed
from the numeric keys [2], [3] and [4].
•
•
•
3.3.6
With the [ORANGE] key locked ‘on’, press [2] to type the letter ‘a’.
Press [3] to type ‘d’, and press [4] to type the letter ‘g’.
To end alpha selection, press the [ORANGE] key again to unlock it.
The Keypad Backlight
The intensity of the keypad backlight and the conditions under which this backlight is activated can be configured using the Keyboard icon in the Windows CE Control Panel. The
behaviour of the keypad backlight is tailored in the Keyboard Properties dialog box. Refer to
“Keyboard Backlight” on page 105 for details about this option.
Note: Keep in mind that this option may be restricted to supervisory use only.
3.4
The Display
7535 G2s are equipped with display backlighting to improve character visibility in low light
conditions. The backlight switches on when a key is pressed and the ambient light is below
the set threshold. A light sensor on the front of the hand-held determines the ambient light
level. On some displays, the contrast can also be adjusted to further improve character
visibility.
3.4.1
Adjusting The Display Backlight
The behaviour of the display backlight (the ambient light threshold below which the backlight will become active) and the intensity of the backlight can be specified in the Display
Properties dialog box in the Control Panel.
Note: Refer to “Backlight” on page 99 for details about the Display Properties dialog
box.
50
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Adjusting The Contrast
3.4.2
Adjusting The Contrast
Note: In addition to the manual adjustments described in this section, the display contrast
can also be adjusted using the Windows CE Control Panel. Refer to “Backlight” on
page 99 for details about this dialog box.
The display contrast can be adjusted from the unit keyboard using the [BLUE] key and function keys [F1] and [F2]. Pressing [F1]
darkens the display, and pressing [F2]
lightens the display. Keep in mind that adjusting the contrast on a colour display is much
less pronounced than on a monochrome display.
To adjust the display contrast:
•
•
Press the [BLUE] key twice to lock it on, and then press [F1]
to darken the display
or [F2]
to lighten the display.
Once you’ve successfully adjusted the display contrast, remember to press the [BLUE]
key again to turn it ‘off’.
Note: Contrast settings are optimized for the maximum readability. However, if the display
jitters or flickers, consider adjusting the contrast at power up.
3.4.3
Calibrating The Touchscreen
If your 7535 G2 touchscreen has never been calibrated, or if you find that the stylus pointer
is not accurate when you tap on an item, use the Stylus Properties dialog box in the Control
Panel to recalibrate the screen.
•
In the Control Panel, choose the Stylus icon to display the Stylus Properties window.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
51
Chapter 3: Getting To Know Your 7535 G2
7535 G2 Indicators
3.5
•
Select the Calibration tab, and then choose the Recalibrate button.
•
Follow the directions on the calibration screen to calibrate the screen.
7535 G2 Indicators
7535 G2s use LEDs (Light Emitting Diodes), onscreen messages and audio tones as
indicators.
3.5.1
LEDs
Hand-helds are equipped with four tri-coloured LEDs. This section outlines what these
LEDs indicate.
Important: If an LED is illuminated in red, the operator should be cautious as this generally indicates an abnormal operating condition or active laser emission.
52
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
LEDs
Figure 3.2 Keyboard LEDs
User Application LED
Radio Traffic LED
Charge LED
Scanner LED
3.5.1.1 Charge LED
The lower-right LED is reserved for internal charger/power status. This indicator is active
even when the hand-held is inserted in a docking station (and in suspend mode) so that the
charge status of the battery can be detected easily.
Table 3.1 Charge LEDs
Function
Charge LED Behaviour
External power not available.
Fully charged to within 95% of charge
capacity.
Quick charge successfully completed to
within 75% of charge capacity.
Charge in progress.
Cell temperature out of range for charge.
Unable to charge battery.
Charge circuit failure.*
LED off.
LED displays solid green colour.
LED flashes slow green.
LED displays solid yellow colour.
LED flashes yellow.
LED displays solid red colour.
LED flashes fast red.*
* If the charge fails, refer to the charger troubleshooting sections in Chapter 6: “Peripheral
Devices & Accessories” for helpful details.
3.5.1.2 Radio Traffic LED
The upper-left LED on your unit flashes either yellow or green to indicate when the radio
transmits and receives data.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
53
Chapter 3: Getting To Know Your 7535 G2
Onscreen Indicators
Note: Keep in mind that while the standard 802.11g radio supports the transmit/receive
LED, not all radios support this function.
Table 3.2 Transmit And Receive LEDs
Function
Radio Transmit
Radio Receive
Radio Traffic LED Behaviour
LED flashes yellow.
LED flashes green.
3.5.1.3 Scan LED
Successful scans are indicated in two ways: with a scan LED and with an audio tone.
Table 3.3 Scan LED
Function
Scan LED Behaviour
Scan in progress
Successful scan
LED displays solid red during scan.
LED displays solid green after decode.
Unsuccessful scan
Off when scan ended.
LED flashes red.
3.5.1.4 User Application LED
This indicator is available for user-loaded custom Windows CE applications. Refer to the
7535 G2 SDK Manual for details about this LED. Neither Windows CE nor TekTerm use
this LED.
3.5.2
Onscreen Indicators
The taskbar at the bottom of the screen displays a variety of system status indicators.
54
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Onscreen Indicators
Figure 3.3 Taskbar
The taskbar changes dynamically, and only those icons that are applicable are displayed. For
example, if a radio is not installed in your 7535 G2, the radio signal icon is not displayed in
the taskbar.
Windows® Start Button
If you are using the touchscreen, you can either tap the Windows icon at the bottom left of
the screen, or press [BLUE] [0] to display the Start Menu, and then tap on the desired
application.
Modifier Key Indicators
[SHIFT], [CTRL], [ALT], [BLUE] and [ORANGE] are modifier keys that have onscreen
indicators to show when a key is active or locked. If a modifier key is pressed once to activate it, the key is displayed in the taskbar in lowercase characters, for example, pressing the
[BLUE] key once displays ‘blue key’ in the taskbar. If a modifier key is pressed twice, it is
‘locked on’ and the onscreen indicator is displayed in uppercase letters in the taskbar, for example, pressing [BLUE] twice displays ‘BLUE KEY’ in the taskbar.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
55
Chapter 3: Getting To Know Your 7535 G2
Onscreen Indicators
Battery Gauge
The battery shaped icon displayed in the taskbar provides a visual indication of the remaining battery power. The icon acts as a meter that is either full, at three-quarter level, half,
quarter level or empty.
When the battery level is low—approximately 15 minutes from empty—a warning window
pops up. When the battery power is completely depleted, a final warning window indicates
that the 7535 G2 will be powered down.
If the 7535 G2 is using external AC power, an AC icon is displayed in the taskbar.
Full
75%
50%
25%
Empty
AC Connection
Battery Charge
The battery charge icon is displayed in the taskbar when the hand-held battery is being
charged.
802.11 Radio Signal Quality
Increasing radio signal quality is represented by longer, filled bars within this icon.
Good
Reception
Weak
Reception
No Radio
Link
Tethered Devices
When a peripheral is attached to the tether port and activated, an associated icon appears in
the taskbar.
Scanner
56
USB Device
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
RFID
Serial Device
Chapter 3: Getting To Know Your 7535 G2
Audio Indicators
Docking Device
When a hand-held is inserted in a docking station, charger or cradle, an associated icon
appears in the taskbar.
Gang Charger, Combo Charger &
Combo Docking Station
Quad Docking Station
Power Cradle
Portable Docking
Module (PDM)
Bluetooth Radio
This icon displayed in the taskbar represents the installed Bluetooth radio.
Security Level
Security levels can be set to limit user access. In addition, applications can be restricted to
prevent inadvertent changes.
3.5.3
Audio Indicators
The beeper provides a variety of sounds and can be configured to emit a sound when a key is
pressed, a keyboard character is rejected, scan input is accepted or rejected, an operator’s
entry does not match in a match field or the battery is low. The volume function keys are
located in the top row of the keyboard. The increase volume key is labelled with a plus
symbol
and the decrease volume function key is labelled with a minus symbol.
3.5.3.1 Adjusting The Beeper Volume
On 58-key and 63-key keyboards, the volume function keys are accessed by pressing
[BLUE] [F5] and [F6].
On 36-key and 37-key keyboards, the volume function keys are accessed by pressing
[BLUE] [F3] and [F4].
To adjust the beeper volume:
•
•
•
•
Press the [BLUE] key twice to lock the key ‘on’ and then, press the increase volume
function key
or the decrease volume
function key until the volume meets your requirements.
Remember to press the [BLUE] key again to turn it ‘off’.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
57
Chapter 3: Getting To Know Your 7535 G2
Internal Scanners
3.6
Internal Scanners
Important: For detailed scanner specifications and decode zone tables, refer to “Internal Scanner Specifications” on page 206.
The 7535 G2 supports a wide range of scanner options to address a variety of user application requirements. The scanner installed in your unit can be configured using the Scanner
Settings dialog box in the Control Panel (see page 138) and the Manage Triggers application
(see page 114). External, non-decoded scanners are also configured through the Scanner
Settings and Manage Triggers applications.
However, external decoded scanners must be configured by scanning special configuration
bar codes. In these cases, the scanner manufacturer provides programming manuals for configuration purposes.
•
•
•
For Symbol decoded scanners, refer to the LS3408 Programming Guide
For Symbol non-decoded scanners, refer to the LS3200 Programming Guide.
For PowerScan® (PSC) decoded and non-decoded scanners, refer to the PowerScan
Programing Guide (PSC).
Scanner types include:
•
Advanced Long Range: reads very large 1D bar codes (60 mil+) at very long distances
(up to 14m).
• Long Range: reads large 1D bar codes (55 mil) at long distances (up to 3m).
• High Performance: reads 1D linear bar codes (5 - 55 mil) at medium distances (up to
1m).
• Extended Range: reads regular 1D bar codes (5 - 55mil) at short to medium distances
(1m), as well as large 1D bar codes (e.g. 55 mil) at long distances.
• RFID: The RD7950 UHF RFID Reader is an EPC-compliant 900MHz RFID reader
which can be integrated with laser bar code scanning or imaging.
• Fuzzy Logic: reads damaged or low contrast regular 1D bar codes (5 - 55mil) at medium
distances (up to 1m).
• PDF Raster Laser: reads 2D PDF bar codes or regular 1D bar codes at short to medium
distances.
• 2D Imager: reads regular 1D and all 2D bar codes at short to medium distances.
• 1D Imager: reads regular 1D and PDF417 bar codes at short to medium distances.
It is critical that you review the “Laser Warnings” on page xxiii in the Approvals and Safety
Summary section at the beginning of this manual before using any of the scanners described
58
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Scanning Techniques
in this chapter. “Scanning Techniques” on page 59 outlines the mechanics of a successful
scan. In addition, review “Scan LED Indicators” on page 59 to better understand how to interpret whether or not a bar code has been successfully scanned. Finally, “Troubleshooting”
on page 60 provides some helpful suggestions should the scan fail.
3.6.1
Scanning Techniques
Note: The scanning techniques described here apply to internal and external scanners.
•
•
•
•
•
•
•
3.6.2
Hold the scanner at an angle. Do not hold it perpendicular to the bar code.
Do not hold the scanner directly over the bar code. In this position, light can reflect back
into the scanner’s exit window and prevent a successful decode.
Scan the entire bar code. If you are using a 1D or PDF laser scanner, make certain that
the scan beam crosses every bar and space on the bar code, including the margins on
either end of the symbol.
If you are using a 2D imaging scanner, make certain the red, oval shaped framing mark
is centered within the bar code you want to scan.
When using imaging scanners, do not move the scanner while decoding the bar code.
Movement blurs the image.
Hold the scanner farther away for larger bar codes.
Hold the scanner closer for bar codes with bars that are close together.
Scan LED Indicators
The scanner LED (the lower-left LED) indicates whether or not your scan is successful. The
LED behaves as follows:
•
•
Scan In Progress: scan LED displays solid red colour.
Successful Scan: scan LED displays solid green colour and turns off when the scan is
ended.
• Unsuccessful scan: scan LED flashes red.
A bar code icon appears on the screen during a scan. While the scanner beam is active, the
onscreen message states: SCANNING. If you want to turn off the onscreen message, disable
“Scan Indication” in the Options tab of the Scanner Settings menu in the Control Panel
When the scan is successful, the bar code data is displayed on the screen until the scan
button (or pistol trigger) is released, but only if “Scan Result” is turned on in the Options tab
of the Scanner Settings menu in the Control Panel.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
59
Chapter 3: Getting To Know Your 7535 G2
Troubleshooting
3.6.3
Troubleshooting
If the scanner is not working, investigate the following:
•
•
•
•
•
•
•
3.6.4
Is the unit on?
Check that the bar code symbology being scanned is enabled for the hand-held you are
using. Check any other parameters that affect the scanning procedure or the bar code.
Check the bar code to make sure it is not damaged. Try scanning a different bar code to
verify that the problem is not with the bar code.
Check that the bar code is within the proper range.
Does the hand-held display the warning without scanning? This suggests a hardware
problem in the hand-held.
Is the laser beam scanning across the bar code?
Once the scan beam has stopped, check the scanner window for dirt or fogging.
Operating One Dimensional (1D) Internal Laser Scanners
•
Turn the hand-held on. Wait until the unit has booted up completely.
Important: If an aiming dot is available on the installed scanner, the dot will be enabled
for a configurable time period (including off), after which normal scanning
begins. Refer to “Dot Time (msec)” on page C-8 for details.
Double-clicking the trigger will override the aiming delay and initiate an
immediate scan. Note that the aiming dot is standard on long-range and
high visibility internal scanners.
•
3.6.5
Aim at the bar code and press the scan key or the trigger. A scan beam and a warning
indicator appear until a successful decode is achieved or six seconds have elapsed.
Operating Internal PDF Laser Scanners
This scanner decodes PDF417 two-dimensional bar codes.
•
•
60
Turn the hand-held on. Wait until the unit has booted up completely.
Aim at the bar code and press the scan key or the trigger. The beam expands into a rectangle covering the bar code to properly scan it. The scan beam and a warning indicator
are visible until a successful decode is achieved or three seconds have elapsed.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Operating Internal Two Dimensional (2D) Imager Scanners
3.6.6
Operating Internal Two Dimensional (2D) Imager Scanners
An imager scanner takes a snap shot of a single bar code or multiple bar codes (at one time).
It can find a bar code regardless of its orientation—that is, even a bar code printed at a 45
degree angle to the hand-held will be decoded successfully.
Note: When scanning multiple bar codes, ensure that all of the desired bar codes are
within the field of view of the scanner. It is possible that even when all bar codes are
within the field of view, not all of them will be decoded. Only successfully decoded
bar codes are passed to the application program. The application program then
issues a warning, asking that you scan the missing bar codes.
When scanning a single bar code, ensure that only the desired bar code is within the
field of view of the scanner.
Because imager scanners generally have a shorter depth of field than laser scanners, some
practise may be required to find the optimal distance from the types of bar codes being
scanned. Although the imager includes illumination LEDs, ambient light will help the
imager decode the bar codes, especially if the bar code is far from the hand-held.
Important: Keep in mind that the imager scanner is a camera, and the LED illumination is a flash. Glare can be an issue on reflective media such as plastic
coated bar codes, just as glare is an issue for photographers. When pointing
at a shiny surface, either shift the bar code to the side or top, or angle the
bar code so that the glare reflects away from the imager scanner.
Most imagers take several ‘snap shots’ of the bar code in order to decode it.
It is normal for the LEDs to flash two or three times. Hold the unit steady
between flashes to improve decode performance.
•
•
Turn the hand-held computer on. Wait until the unit has booted up completely.
Aim at the bar code and press the scan key or the trigger. Hold the trigger until a successful or failed scan result is obtained.
• When the scan button or trigger is pressed, a red, oval shaped light (the framing marker)
is displayed. Centre the framing marker in the field—either in the centre of the bar code
you want to scan or in the centre of the area in which multiple bar codes are to be
scanned.
The illumination LEDs will flash (typically several times) and a picture of the bar code(s)
is taken.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
61
Chapter 3: Getting To Know Your 7535 G2
Operating RFID/Scanner Modules
3.6.7
Operating RFID/Scanner Modules
For detailed information on the RD7950 UHF RFID Reader please refer to the RD7950
UHF RFID Reader Quick Reference Guide (P/N 8000056).
Important: For successful reads, the distance from the hand-held to the RFID tag
varies depending on the type of tag.
3.7
Connecting And Disconnecting Tethered Peripherals
Tethered peripherals such as scanners and printers connect to the hand-held computer with a
quick release, circular connector. When a peripheral is connected to the hand-held, the unit
detects the peripheral and loads the necessary drivers for it. An icon in the taskbar at the
bottom of the screen provides a visual representation of the peripheral and indicates that it is
ready for operation. To attach the peripheral to the round, tether port on the side of the unit:
•
Insert the barrel of the plug into the tether port and rotate slowly until it clicks into place.
The red dot on the port and on the connector should be aligned.
Figure 3.4 Attaching The Cable To The Tether Port
To remove the peripheral:
•
62
Grasp the shell of the plug, and pull it back gently to unlock and release the connector.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Monitoring The Network Connection
Figure 3.5 Disconnecting The Tether Cable
Important: Never attempt to disconnect a peripheral by pulling the connector by the
wire. The connector is locked into place and can only be unlocked and
removed by pulling back the plug shell.
3.8
Monitoring The Network Connection
If your hand-held is equipped with a wireless LAN radio, it will typically associate with the
nearest access point. The radio signal quality meter in the taskbar indicates the relative
strength of the communication link.
To access the radio signal icon:
• Tap on the radio icon in the taskbar to display the wireless statistics dialog box.
To access the radio signal icon using the keyboard:
•
•
•
•
Press [BLUE] [0] to display the Start Menu.
Highlight Shortcuts and then choose System Tray from the sub-menu.
Use the [LEFT] and [RIGHT] arrow keys to highlight the radio signal icon in
the taskbar.
Press [ENTER] to display the Wireless Statistics dialog box.
Note: Moving in and out of the radio coverage area can have varying effects on a network
session. At times, you may need to renew your connection by logging in again.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
63
Chapter 3: Getting To Know Your 7535 G2
Uploading Data In A Docking Station
3.9
Uploading Data In A Docking Station
The Combo Docking and Quad Docking peripherals allow your hand-held to link to an
Ethernet network. They are typically used to upload transaction data to a server computer
when a radio link is not available. When a 7535 G2 is properly inserted in a docking station,
a dock icon is displayed in the taskbar at the bottom of the unit screen. The hand-held also
detects the presence of the Ethernet network. Review the documentation provided with the
user application installed in your 7535 G2 before preforming data uploads.
3.10
General Maintenance
3.10.1 Caring For The Touchscreen
The touchscreen is covered with a thin, flexible polyester plastic sheet with a conductive
coating on the inside. The polyester can be permanently damaged by harsh chemicals and is
susceptible to abrasions and scratches. Using sharp objects on the touchscreen can scratch or
cut the plastic, or crack the internal conductive coating. The chemicals listed below must not
come into contact with the touchscreen:
• mustard, ketchup
• sodium hydroxide,
• concentrated caustic solutions,
• benzyl alcohol, and
• concentrated acids.
If the touchscreen is used in harsh environments, consider applying a disposable screen protector (P/N HU6110). These covers reduce the clarity of the display slightly but will
dramatically extend the useful life of the touchscreen. When they become scratched and
abraded, they are easily removed and replaced.
3.10.2 Cleaning The 7535 G2
Important: Do not immerse the unit in water. Dampen a soft cloth with mild detergent
to wipe the unit clean.
To prevent damage to the touchscreen, use only the stylus (pen) supplied
with your 7535 G2.
•
64
Use only mild detergent or soapy water to clean the hand-held unit.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 3: Getting To Know Your 7535 G2
Cleaning The 7535 G2
•
•
Avoid abrasive cleaners, solvents or strong chemicals for cleaning. The 7535 G2 has a
plastic case that is susceptible to harsh chemicals. The plastic is partially soluble in oils,
mineral spirits and gasoline. The plastic slowly decomposes in strong alkaline solutions.
To clean ink marks from the keypad and touchscreen, use isopropyl alcohol.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
65
4
WINDOWS EMBEDDED CE 5.0
4.1 Navigating In Windows CE And Applications. . . . .
4.1.1 Navigating Using A Touchscreen And Stylus
4.1.2 Navigating Using The Keyboard. . . . . . .
4.2 Working With Files, Folders And Programs . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
69
69
69
71
4.3 The Startup Desktop . . . . . . . . . . . . .
4.3.1 The Desktop Icons . . . . . . . . .
4.3.2 The Taskbar. . . . . . . . . . . . .
4.3.2.1 Using The Taskbar . . . .
4.3.2.2 Customizing The Taskbar .
4.4 The Start Menu . . . . . . . . . . . . . . . .
4.4.1 The Desktop . . . . . . . . . . . .
4.4.2 Security Settings . . . . . . . . . .
4.4.3 Programs . . . . . . . . . . . . . .
4.4.4 Shortcuts . . . . . . . . . . . . . .
4.4.5 Settings . . . . . . . . . . . . . . .
4.4.6 Run . . . . . . . . . . . . . . . . .
4.4.7 Shutdown . . . . . . . . . . . . . .
4.5 Using A Dialog Box . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
71
72
73
74
74
75
76
76
78
79
81
82
82
83
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
67
68
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
Navigating In Windows CE And Applications
4.1
Navigating In Windows CE And Applications
Note: In order to access many of the menus discussed in this chapter, the security level
must be set to ‘Supervisor’ (see “Security Settings” on page 76).
Graphic user interfaces like Windows CE for portable devices and desktop Windows (2000,
XP, etc.) utilize ‘point and click’ navigation. An equivalent keyboard shortcut is also available for every ‘point and click’ action.
Windows CE supports the same ‘point and click’ user interface and keyboard shortcuts as
desktop Windows with one difference—the ‘point and click’ action is accomplished using a
touchscreen rather than a mouse. Actions can be performed using any combination of keyboard shortcuts or touchscreen tapping.
4.1.1
Navigating Using A Touchscreen And Stylus
Note: If the touchscreen is not registering your screen taps accurately, the touchscreen
may need recalibration. Refer to “Calibrating The Touchscreen” on page 51.
A touchscreen is an optional feature on 7535 G2s. A hand-held equipped with a touchscreen
comes equipped with a stylus—a pointing tool that looks like a pen—stored in a slot at the
top of the unit. The stylus is used to select objects on the touchscreen.
Note: To prevent damage to the touchscreen, use only the stylus (pen) supplied with
your 7535 G.
To choose an icon, open a file, launch an applet or open a folder:
•
4.1.2
Double-tap the stylus on the appropriate icon.
Navigating Using The Keyboard
If your 7535 G2 has a standard screen (rather than a touchscreen), choosing icons and navigating dialog boxes, displaying the desktop, and so on requires keyed input. If your unit has
already been fully configured and your application is launched at startup, you’ll have little
need for keyboard navigation, but you can refer to Table 4.1: “Keyboard Navigation” on
page 70 for a description of the navigation keys.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
69
Chapter 4: Windows Embedded CE 5.0
Navigating Using The Keyboard
Table 4.1
Keyboard Navigation
Operation
Switch between active
applications
Open task manager
Move the cursor
Open file, folder or icon
Exit & Save
Close/Exit & Do Not Save
Navigate Dialog Boxes
Key or Key Combination
[ALT] [TAB]
[ALT] [ESC]
Arrow keys
[ENTER]
[ENTER]
[ESC]
[TAB]
To move cursor up [SHIFT] [TAB]
Select Radio Button/Press Button
Go to Start Menu
To display the contents of the next ‘tab’ in a
dialog box [CTRL] [TAB]
[SPACE]
[BLUE][0]
Keep in mind that unlike a desktop computer, the 7535 G2 does not support key chording
(pressing two keys at the same time). You must press one key followed by the next in sequence. Refer to “Working With Files, Folders And Programs” on page 71 for additional
details about keyboard navigation.
70
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
Working With Files, Folders And Programs
4.2
Working With Files, Folders And Programs
Figure 4.1 Working With Windows Icons
Folder
Program Icon
File
•
Double-tap on the appropriate icon—either a folder icon, a program icon or a file
icon—to open or launch your selection.
If you’re using the keyboard:
•
•
4.3
Use the arrow keys to highlight the icon you want to open or launch.
Press [ENTER].
The Startup Desktop
When the 7535 G2 boots up, the startup desktop (shell) is displayed. Any applications stored
in the Startup folder start up immediately.
Note: The startup folder is located in \Windows\StartUp and \Flash Disk\StartUp.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
71
Chapter 4: Windows Embedded CE 5.0
The Desktop Icons
Figure 4.2 The 7535 G2 Startup Desktop
To access desktop icons:
•
Double-tap on the icon to open a window or, in the case of an application icon, launch
an application.
On the keyboard:
•
Use the arrow keys to highlight the icon, and press [ENTER] to launch the highlighted
icon.
Note: If the arrow keys do not highlight the desktop icons, the desktop may not be selected.
Press [BLUE] 0 (zero) to display the Start Menu, and select Desktop. Now the desktop will be “in focus” and the arrow keys will highlight the icons.
4.3.1
The Desktop Icons
The icons displayed in the startup desktop operate in much the same way as those displayed
on any standard PC desktop that is running Windows.
My Device
Choosing this icon displays the contents of your 7535 G2 computer. If you’re not sure how
to work with the files, folders and programs displayed, refer to “Working With Files, Folders
And Programs” on page 71.
Recycle Bin
This option temporarily stores items that were deleted, allowing you to either permanently
delete or restore these items.
72
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
The Taskbar
Internet Explorer
Choosing this icon launches Internet Explorer—a standard Windows CE version. Keep in
mind that your supervisor will need to set up access using the Internet Options and the
Network and Dial-up Connections icons in the Control Panel.
Remote Desktop Connection
This option allows your 7535 G2 to communicate with a remote desktop PC. “Remote Connect” on page 89 provides a website with step-by-step instructions.
4.3.2
The Taskbar
The 7535 G2 is equipped with a taskbar at the bottom of the screen. It displays icons through
which you can view the battery capacity and radio signal quality of your unit. If the handheld is attached to a charger, cradle, docking station or PDM, an associated icon is displayed. In addition, the taskbar displays the application(s) currently running on your unit
and the security level assigned to your 7535 G2.
The taskbar also displays active modifier keys: [SHIFT], [ALT], [CTRL], [BLUE] and [ORANGE]. Keys that have been locked “on” are displayed in uppercase letters. For example, if
you have set the [CTRL] key Lock to “on” in the Keyboard menu and you press the key, it is
displayed as CTRL KEY in the taskbar. (For detailed information on modifier keys and keyboard options, see “The Keyboard” on page 43).
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
73
Chapter 4: Windows Embedded CE 5.0
The Taskbar
4.3.2.1 Using The Taskbar
A tooltip is displayed as each taskbar icon is highlighted. The tooltip provides the status of
each icon.
If you’re using the touchscreen:
•
Tap and hold the stylus on an icon to display the icon's tooltip. Double-tap the icon to
open the Control Panel dialog box associated with the icon. For example, double-tap the
battery icon to display a dialog box listing the current battery capacity information.
On the keyboard:
•
•
•
•
•
Press [BLUE] [0] to display the Start Menu.
Choose Shortcuts from the Start Menu, and then press the [RIGHT] arrow key to
display the sub-menu.
Choose System Tray in the sub-menu.
Use the arrow keys to highlight the icon in the taskbar about which you’d like more
information.
Press [ENTER] to display the appropriate dialog box.
4.3.2.2 Customizing The Taskbar
To customize the taskbar so that it displays only those icons you require:
• In the Start Menu, choose Settings, and then Taskbar.
If you’re using the keyboard:
• Press [BLUE] [0] (zero) to display the Start Menu.
• Highlight the Settings option, highlight Taskbar in the sub-menu, and press [ENTER].
The Taskbar and Start Menu dialog box is displayed.
74
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
The Start Menu
•
Tap the stylus on the items you want to activate or deactivate. The check mark indicates
active items.
If you’re using the keyboard:
•
4.4
Highlight the options you want to activate, and press the [SPACE] key to select them. A
check mark indicates active items.
The Start Menu
Note: Some of the Start Menu items may be disabled based on the current 7535 G2
security settings.
The Start Menu lists the operations you can access and work with. It is available from the
startup desktop or from within any application.
To display the menu:
•
Press [BLUE] [0] (zero).
Note: Tap on the item in the menu with which you want to work.
If you’re using the keyboard:
•
Use the arrow keys to highlight a menu item, and press [ENTER], or
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
75
Chapter 4: Windows Embedded CE 5.0
The Desktop
If the menu item has an underlined character:
•
4.4.1
Type the underlined alpha character. For example, to display the Security dialog box,
type the letter ‘s’.
The Desktop
Choosing the Desktop option from the Start Menu displays the 7535 G2 desktop.
4.4.2
Security Settings
Choosing the Security option from the Start Menu displays a dialog box in which you can
define the access level for the 7535 G2: Supervisor or User.
Assigning The Supervisor Security Level
The security level is represented by an icon in the shape of a lock in the taskbar. The security
levels define the options accessible to the operator in the Start Menu and the taskbar. By default, the security level is set to User, restricting access to only the most basic Start Menu
items.
76
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
Security Settings
To allow access to all the Start Menu and taskbar options:
•
•
•
In the Security Level dialog box, select the radio button next to Supervisor.
In the Password field, type the Supervisor level password. The default password is
123456.
Select OK. You can now access all menu items in the Start Menu along with the icons in
the taskbar.
Changing A Password
Note: Keep in mind that this is the same password as that assigned through the Password
control panel applet. Refer to “Control Panel Icons” on page 90.
To assign a password:
• Choose a security level, and enter the existing password in the Password field
• Select the Set Password button.
A dialog box labelled Password Properties is displayed.
•
•
Type the new password in the Password: text box (all keyboard characters are valid).
In the Confirm Password: text box, retype the new password.
Configuring Security
Choosing the Configure button displays the Configure Security dialog box.
This dialog box allows you to determine which security levels will have an associated icon
displayed in the taskbar. By default, a security icon is not displayed for user-level security.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
77
Chapter 4: Windows Embedded CE 5.0
Programs
4.4.3
Programs
•
Choose Programs to display a sub-menu of options.
Figure 4.3 Program Sub-Menu
This sub-menu allows you to choose ActiveSync and Command Prompt, and you can access
the Internet Explorer, installed applications (e.g., Microsoft WordPad), Remote Connect or
Windows Explorer.
ActiveSync®
This option allows you to connect to another device using ActiveSync.
Demo
This folder contains the Demo Imager, Demo Scanner, and Demo Signature applications.
Demo Imager is used for simple image-capturing purposes and for displaying bar code data
and bar code statistics on the same screen with image data and information. Demo Scanner
can be used to test how the hand-held reads and writes RFID tags. Demo Signature allows
you to capture a signature written on the screen with your stylus and save it to a file.
Command Prompt
Command Prompt is used to access the DOS command prompt. At the prompt, you can type
DOS commands such as dir to display all the directories in the drive.
Internet Explorer
The 7535 G2 is equipped with Microsoft Internet Explorer for Windows CE. You can access
the Internet Options icon through the Start Menu under Settings, Control Panel or by
78
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
Shortcuts
double-tapping on the desktop icon My Device and then, double-tapping on the Control
Panel icon.
Remote Connect
Remote Connect is a 7535 G2 application used to connect to a Windows Terminal Server so
that you can run a “session” on the Server machine using the 7535 G2 (Windows CE device). “Remote Connect” on page 89 provides a website with details about this option.
Windows Explorer
The Windows Explorer installed on your 7535 G2 is consistent with all Windows CE devices. You can access this option from the Start Menu under Programs, Windows Explorer.
4.4.4
Shortcuts
Figure 4.4 Shortcuts Sub-Menu
System Tray
If your touchscreen is not enabled, you can use the System Tray option to access the icons in
the taskbar at the bottom of the screen. The taskbar displays indicators such as a radio signal
icon and the security level. These indicators are attached to dialog boxes that provide additional information.
• Choose Shortcuts, System Tray.
When System Tray is chosen, the taskbar icons become accessible. To display the dialog box
attached to an icon:
•
•
Use the arrow keys to highlight an icon, for example, the security icon.
Press [ENTER] to display the security level dialog box.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
79
Chapter 4: Windows Embedded CE 5.0
Shortcuts
Cycle Tasks
When Cycle Tasks is selected (and the Task Manager is not open), you can cycle through
active applications.
To cycle through your active applications:
•
•
Choose Shortcuts, Cycle Tasks, or
Press [ALT] [TAB].
Task Manager
The Task Manager allows you to switch to another task or to end an active task. To display
the task manager window:
•
•
80
Tap on Shortcuts, Task Manager, or
Press [ALT] [ESC].
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
Settings
4.4.5
Settings
The Settings sub-menu includes the following settings: Control Panel, Network and Dialup Connections and Taskbar and Start Menu.
Figure 4.5 Settings Sub-Menu
Control Panel
The Control Panel contains applets used to configure hardware, the operating system and
the shell. If your 7535 G2 is running with the Psion Teklogix TekTerm application or
another application, additional configuration applets may appear in the Control Panel.
Network And Dial-Up Connections
The Network and Dial-up Connections window allows you to configure the 7535 G2 radio
or execute an existing configuration. Refer to “Configuring Your Radio” on page 19 for
radio setup details.
Taskbar And Start Menu
The Taskbar and Start Menu option displays a dialog box in which you can customize the
taskbar, choosing which options will be displayed. Refer to “Customizing The Taskbar” on
page 74 for additional details about this option.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
81
Chapter 4: Windows Embedded CE 5.0
Run
4.4.6
Run
Choosing the Run option from the Start Menu displays a dialog box in which you can enter
the name of the program, folder or document you want to open or launch.
4.4.7
Shutdown
The Shutdown menu includes these options: Suspend, Warm Reset and Cold Reset.
Note: This menu varies slightly depending on the security level chosen. When the 7535 G2
is set to User level, the Shutdown option is replaced by Suspend. A sub-menu is not
available.
82
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 4: Windows Embedded CE 5.0
Using A Dialog Box
Suspend
The Suspend option suspends the 7535 G2 immediately. This is equivalent to turning the
hand-held off.
Warm Reset
The Warm Reset option resets the 7535 G2, leaving all saved files and (registry) settings
intact. Any unsaved data is lost.
Cold Reset
The Cold Reset option resets the 7535 G2 (see page 35). Any files not stored in permanent
memory are lost; however, the registry settings are saved.
4.5
Using A Dialog Box
A dialog box (like the samples in Figure 4.6) appears when you need to make selections and
enter further information. You can move between dialog items by tapping on them with your
stylus, or by pressing the arrow keys and the [TAB] key ([SHIFT] [TAB] moves the cursor
backwards).
Figure 4.6 Dialog Boxes
Tabs
Radio
Button
Textbox
Drop-down Menu
Checkbox
Button
Note: You can use the stylus to tap on an element in a dialog box to select or deselect it,
display drop-down menu items, save your selections, and so on.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
83
Chapter 4: Windows Embedded CE 5.0
Using A Dialog Box
Dialog boxes contain one or more of the following elements:
Tab: A tab separates different elements of a dialog box. Press the [TAB] key until a tab in
the dialog box is highlighted. To display adjoining tabs, press the [RIGHT] or [LEFT] arrow
key. To display the information in the next tab from anywhere in the window, press [CTRL]
[TAB].
Textbox: A textbox requires that you type information. Press the [TAB] key to highlight the
textbox and then type the appropriate information.
Drop-down: This type of menu is identified by up and down arrows next to the drop-down
menu to indicate that additional options are available. Press the [TAB] key to highlight the
menu, and use the arrow keys on your keyboard to cycle through the options.
Checkbox: This box allows you to select or deselect an option. To select or deselect a
checkbox, press the [TAB] key to highlight the checkbox, and press the [SPACE] key to
select or deselect it.
Radio buttons: These buttons allow you to choose from a number of options. For example,
in the sample screen in Figure 4.6 on page 83 you can choose to Obtain an IP address via
DHCP or Specify an IP address. Press the [TAB] key to highlight a radio button option, and
then select a radio button by pressing the arrow keys to highlight the appropriate option.
Buttons: This type of button allows you to Save, Delete and so on the options you’ve chosen
in a dialog box. Use the [TAB] key to highlight the button you want to use. Press the
[ENTER] key to activate it.
Saving Your Choices: Once you’ve made all your changes, press the [ENTER] key to save
your changes and exit the window.
Note: A dialog box item that is displayed in grey text indicates that it is not currently
available.
84
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
5
CONFIGURATION
5.1 Remote Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.2 The TekTerm Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.3 Pocket PC Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.4 The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
5.5 Control Panel Icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
5.6 Control Panel Applications: Basic Setup. . . . . . . . . . . . . . . .
5.6.1 App Launch Keys . . . . . . . . . . . . . . . . . . . . . .
5.6.2 Certificates . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6.3 Display Properties . . . . . . . . . . . . . . . . . . . . . .
5.6.3.1 Background . . . . . . . . . . . . . . . . . . . . .
5.6.3.2 Appearance . . . . . . . . . . . . . . . . . . . . .
5.6.3.3 Backlight . . . . . . . . . . . . . . . . . . . . . .
5.6.3.4 Contrast . . . . . . . . . . . . . . . . . . . . . . .
5.6.4 Input Panel . . . . . . . . . . . . . . . . . . . . . . . . . .
5.6.5 Keyboard Properties . . . . . . . . . . . . . . . . . . . . .
5.6.5.1 Key Repeat . . . . . . . . . . . . . . . . . . . . .
5.6.5.2 Keyboard Backlight . . . . . . . . . . . . . . . . .
5.6.5.3 Keyboard One Shot Modes . . . . . . . . . . . . .
5.6.5.4 Keyboard Macro Keys . . . . . . . . . . . . . . .
5.6.5.5 Unicode Mapping . . . . . . . . . . . . . . . . . .
5.6.5.6 Scancode Remapping . . . . . . . . . . . . . . . .
5.6.5.7 Lock Sequence . . . . . . . . . . . . . . . . . . .
5.6.6 Manage Triggers . . . . . . . . . . . . . . . . . . . . . . .
5.6.6.1 Trigger Mappings . . . . . . . . . . . . . . . . . .
5.6.6.2 Add And Edit Trigger Mapping. . . . . . . . . . .
5.6.7 Power Management Properties. . . . . . . . . . . . . . . .
5.6.7.1 Battery Capacity. . . . . . . . . . . . . . . . . . .
5.6.7.2 Power Saving Suspend . . . . . . . . . . . . . . .
5.6.7.3 Suspend Threshold And Estimated Battery Backup
5.6.7.4 Calibrate . . . . . . . . . . . . . . . . . . . . . . .
5.6.7.5 Advanced . . . . . . . . . . . . . . . . . . . . . .
5.6.7.6 Devices . . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
. 94
. 94
. 97
. 98
. 98
. 99
. 99
.101
.102
.103
.104
.105
.106
.107
.109
. 110
. 113
. 114
. 115
. 116
. 118
. 119
. 119
.120
.122
.122
.123
85
5.6.7.7 Built In Devices . . . .
5.6.8 Stylus Properties. . . . . . . . .
5.6.8.1 Double-Tap . . . . . . .
5.6.8.2 Calibration . . . . . . .
5.6.8.3 Touch . . . . . . . . . .
5.6.9 Volume And Sounds Properties .
5.6.9.1 Volume Adjustments . .
5.6.9.2 Sound Adjustments. . .
5.7 Bluetooth Setup . . . . . . . . . . . . . .
5.7.1 Devices . . . . . . . . . . . . .
5.7.2 Headset . . . . . . . . . . . . .
5.7.3 Servers. . . . . . . . . . . . . .
5.7.4 Outgoing. . . . . . . . . . . . .
5.7.5 Active Conn. . . . . . . . . . .
5.7.6 Properties . . . . . . . . . . . .
5.7.7 Search For . . . . . . . . . . . .
5.8 Error Reporting . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
123
124
124
124
125
125
126
126
126
127
131
132
133
134
135
136
136
5.9 IPv6 Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
5.10 Scanner Settings . . . . . . . . . . . . . . . . . . . . .
5.10.1 Bar Codes . . . . . . . . . . . . . . . . . . .
5.10.1.1 Scanner . . . . . . . . . . . . . . . .
5.10.1.2 Restoring Default Settings . . . . . .
5.10.2 Options . . . . . . . . . . . . . . . . . . . . .
5.10.2.1 Double Click Parameters . . . . . . .
5.10.2.2 Display Parameters . . . . . . . . . .
5.10.3 Translations . . . . . . . . . . . . . . . . . .
5.10.3.1 Case Rules . . . . . . . . . . . . . .
5.10.4 Ports . . . . . . . . . . . . . . . . . . . . . .
5.10.4.1 Tether Port (COM1) . . . . . . . . .
5.10.4.2 Console Port (COM3) . . . . . . . .
5.10.4.3 Port Replicator Tether (COM6). . . .
5.10.4.4 Port Replicator Port A (COM5) . . .
5.11 SNMP (Simple Network Management Protocol) Setup .
5.11.1 Contact . . . . . . . . . . . . . . . . . . . . .
5.11.2 Communities . . . . . . . . . . . . . . . . . .
5.11.2.1 Adding A Community . . . . . . . .
5.11.2.2 Modifying A Community Setting. . .
86
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
138
139
139
140
141
141
142
143
145
146
147
148
149
150
151
152
153
153
154
5.11.2.3 Removing An Existing Community .
5.11.3 Trap Destination. . . . . . . . . . . . . . . .
5.11.3.1 Enabling Authentication TRAPS . .
5.11.3.2 Adding A Destination . . . . . . . .
5.11.3.3 Changing A Destination . . . . . . .
5.11.3.4 Removing A Trap Destination . . . .
5.11.4 Permitted Hosts . . . . . . . . . . . . . . . .
5.11.4.1 Adding A Host . . . . . . . . . . . .
5.11.4.2 Changing A Host. . . . . . . . . . .
5.12 The Storage Manager . . . . . . . . . . . . . . . . . .
5.12.1 Formatting A Memory Card . . . . . . . . .
5.12.2 Creating Partitions . . . . . . . . . . . . . .
5.12.3 Partition Management. . . . . . . . . . . . .
5.13 Teklogix Error Handling Service . . . . . . . . . . . .
5.13.1 ErrorLogInfo . . . . . . . . . . . . . . . . .
5.13.2 NetLog . . . . . . . . . . . . . . . . . . . .
5.14 Teklogix Imagers . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.154
.155
.155
.155
.155
.156
.156
.157
.157
.158
.158
.159
.160
.162
.163
.163
.164
5.15 Total Recall . . . . . . . . . . . . . . . . . . . . . .
5.15.1 Creating A Backup Profile . . . . . . . . .
5.15.2 Restoring A Profile . . . . . . . . . . . . .
5.16 TweakIT Settings . . . . . . . . . . . . . . . . . . .
5.16.1 Advanced . . . . . . . . . . . . . . . . . .
5.16.1.1 Advanced Interface And Network .
5.16.1.2 Advanced Services Settings . . . .
5.16.1.3 Advanced Intermediate Driver. . .
5.16.1.4 Radio Features . . . . . . . . . . .
5.16.2 User . . . . . . . . . . . . . . . . . . . . .
5.16.2.1 Internet Explorer Settings . . . . .
5.16.2.2 User Display Settings . . . . . . .
5.16.2.3 User System Settings . . . . . . .
5.16.3 Registry Editor . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.165
.165
.169
.170
.170
.170
.171
.172
.173
.174
.174
.174
.175
.176
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
87
Chapter 5: Configuration
Remote Connect
5.1
Remote Connect
Remote Connect is a 7535 G2 application used to connect to a Windows Terminal Server so
that you can run a “session” on the Server machine, using the 7535 G2 (Windows CE
device).
Refer to the following website for step-by-step information about setting up this connection:
http://www.microsoft.com/WindowsXP/pro/using/howto/gomobile/remotedesktop/default.asp, or contact
Psion Teklogix support services.
5.2
The TekTerm Application
TekTerm is a powerful emulation application ideally suited for real time data transaction applications associated with mainframes and servers. The 7535 G2 includes unique features
that support TekTerm—a Psion Teklogix application that has the ability to maintain multiple
simultaneous sessions with a variety of host computers. For detailed information, please
refer to the TekTerm Software User Manual, P/N 8000073.
5.3
Pocket PC Compatibility
The 7535 G2 supports the AYGShell API set that allows Pocket PC-compatible applications
to run on the hand-held. Windows CE includes application programming interface (API)
compatibility support for the Microsoft Windows Powered Pocket PC 2002 shell in units
running Windows CE.
The website listed below describes the APIs exposed through AYGShell and the application
compatibility between Windows Powered Pocket PC 2002-based applications and Windows
CE-based devices:
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dncenet/html/WINCENET_CEPCC_App.asp
5.4
The Control Panel
The Windows CE Control Panel provides a group of applications through which you can set
a variety of system-wide properties, such as mouse sensitivity, network configuration and
the desktop color scheme.
Note: If you are uncertain how to move around a dialog box and make selections, review
“Using A Dialog Box” on page 83.
When the 7535 G2 boots up, the startup desktop (shell) is displayed, and any applications
stored in the Startup folder start up immediately.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
89
Chapter 5: Configuration
Control Panel Icons
To access the Control Panel:
• Press [BLUE] [0] to display the Start Menu.
• Use the stylus to tap on Settings>Control Panel.
If you’re using the keyboard:
•
•
Press [BLUE] [0] to display the Start Menu.
Highlight Settings in Start Menu, and press the [RIGHT] arrow key to highlight the
Control Panel.
• Press the [ENTER] key.
The Control Panel folder contains icons used in the setup of your 7535 G2.
Figure 5.1 Control Panel Icons
5.5
Control Panel Icons
The Control Panel provides a group of applications that allow you to customize and adjust
settings on your 7535 G2. This section shows the related icons in the Control Panel and
90
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Control Panel Icons
gives a brief description of each. Section 5.6: “Control Panel Applications: Basic Setup” describes the basic configuration for these applications.
App Launch Keys
By mapping keys to applications using this program, you can then launch those applications
from a single key-press.
Bluetooth Devices
Provides options for Bluetooth radio setup. It also provides the capability to use a Bluetoothenabled cellular phone as a data modem to exchange information with other Bluetooth
devices and provide network access.
Certificates
A public key is transmitted as part of a certificate. The certificate assigned through this icon
is used to ensure that the submitted public key is, in fact, the public key that belongs to the
submitter. The client checks that the certificate has been digitally signed by a certification
authority that the client explicitly trusts. “Certificates” on page 97 directs you to the appropriate setup information.
Date/Time
Allows you to set the current Month, Date, Time, and Time Zone on your unit.
Dialing
Specifies dialing settings, including area code, country code, dial type and the code to
disable call waiting. You can store multiple patterns—for example, ‘Work’, ‘Home’, and so
on using this dialog box.
Display
Changes the appearance (window colour scheme) on the unit desktop.
Error Reporting
Allows you to enable or disable Microsoft error reporting prompts.
Input Panel
Provides the framework for a Soft Input Panel (SIP) should you need to design your own
SIP, or change some soft keyboard options.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
91
Chapter 5: Configuration
Control Panel Icons
Internet Options
Provides options to configure your Internet browser. You can determine items such as the
default and search page that the browser applies when connecting to the Internet, the cache
size, the Internet connection options, and the security level that is applied when browsing.
IPv6 Support
Refers to a new Internet Protocol specification (version 6) that has been published to use
128-bit IP addresses (replacing version 4).
Keyboard
Toggles character repeat on and off and specifies delay and rate for repeated characters. It
also allows you to adjust the keyboard backlight threshold and intensity.
Manage Triggers
Allows multiple-scanner trigger management, including the ability to configure each of the
trigger buttons. You can configure the trigger ID for each trigger button for both single- and
double-click, and the double-click time.
Network And Dial-up Connections
Displays a network window from which the 7535 G2 802.11g radio can be configured and
an existing configuration can be executed. Refer to “Configuring Your Radio” on page 19
for details.
Owner
Provides fields in which you can specify owner information. A Notes tab allows additional
information to be entered and displayed when the unit is powered up. Network ID tab information is used to access network resources. (This information should be provided by your
System Administrator.)
Password
Allows you to assign a password to restrict access to elements of the unit. Once assigned,
password access cannot be circumvented so it is important that you write down your password and keep it in a safe place. Refer to “Security Settings” on page 76 for details.
PC Connection
Enables direct connections to a desktop computer. Selecting the Change Connection button
allows you to change the type of direct connect to your PC.
92
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Control Panel Icons
Power
Displays battery pack power status. (Alternately, battery status can be accessed through the
taskbar.) Additional tabs allow you to determine suspend states, specify a suspend threshold
and, when seated in either the Combo Dock or Quad Dock, determine whether or not a
battery that requires it can be recalibrated. This dialog box also allows you to activate card
slots. (Refer to “Devices” on page 123 for details.)
RDC Licenses
The Terminal Services license server stores all license tokens that have been installed for a
group of terminal servers and tracks licenses issued. The Remote Desktop Licenses (RDC)
application displays license ‘tokens’ for devices that connect to a Terminal Server.
Region & Language
Allows you to specify the local language that is to be displayed on the hand-held screen
along with the format of numbers, currency, time and date for your region.
Remove Programs
Lists the programs that can be removed from your unit. To remove a program, select it and
then click on the Remove button.
SNMP
SNMP (Simple Network Management Protocol) is the protocol used to monitor and manage
devices attached to a TCP/IP network.
Storage Manager
Allows you to view information about the storage devices that are present, such as SDMMC flash cards. For details, see page 158.
Stylus
Adjusts how Windows CE recognizes your double-tap (as slow or rapid successive taps). In
the Calibration tab, you can recalibrate your touchscreen by tapping on the Recalibrate
button and following the directions on the screen.
System
Displays system and memory properties. In the Memory tab, you can allocate memory
between storage memory and program memory.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
93
Chapter 5: Configuration
Control Panel Applications: Basic Setup
Teklogix Error Handling Service
Is an error diagnostic tool that enables you to log error messages to report to Psion Teklogix.
Teklogix Scanners
Provides scanner parameters and the bar code symbologies that the 7535 G2 scanner will
successfully read.
Teklogix Imagers
The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings.
This icon is only present when the appropriate imager is installed. For detailed information,
see Appendix D: “Teklogix Imagers Applet”.
Total Recall
Provides access to a backup and restore utility to maintain applications and settings over
cold reboots.
TweakIT Settings
Allows you to change Advanced System Settings (interface, network, and servers), User
System Settings (display font size), and provides the Registry Editor.
Volume & Sounds
Allows you to adjust the volume of the sound emitted to indicate events like warnings, key
clicks and screen taps.
Wireless WAN
When the appropriate radio is available, provides access to technology like GSM/GPRS,
which allows wide area networking capability such as internet browsing.
5.6
Control Panel Applications: Basic Setup
5.6.1
App Launch Keys
The App Launch Keys icon allows you to map a key to an application so that you can then
launch the application from a single key-press.
•
94
In the Control Panel, choose the App Launch Keys icon.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
App Launch Keys
To assign an application key:
•
Tap the Add button.
•
Press the key you want to use to launch an application. (If an unsupported key is
pressed, a message appears on this screen letting you know.)
The cursor moves to the App field and a new screen is displayed where you can choose the
application to which you want to assign the application key. If you need to, you can Browse
through the information in your 7535 G2 until you locate the application you want to launch.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
95
Chapter 5: Configuration
App Launch Keys
• Once you’ve selected the file you want to map, tap on OK.
The cursor moves to the Data field. You can use this field if you need to define special parameters to your application launch key. If you don’t want to assign any parameters, you can
leave the Data field blank. If, for example, you want to assign an application launch key to
launch the WordPad application, you can leave this field blank. If you want to assign an application launch key that will open a specific document in the WordPad application, you
need to browse to and choose that document while the cursor is in the Data field.
•
Tap on OK.
•
If you need to Edit, Remove or Add another App Launch Key, you can do it from this
final screen. Otherwise, tap on OK to save your Application Launch Key.
To launch the application you chose, press the application key you assigned.
•
96
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Certificates
5.6.2
Certificates
A public key is transmitted as part of a certificate. The certificates listed in the Certificates
tabs ensure that the submitted public key is, in fact, the public key that belongs to the submitter. The 7535 G2 checks that the certificate has been digitally signed by a certification
authority that the 7535 G2 explicitly trusts. This option is used in conjunction with 802.1x
authentication to enhance 7535 G2 security.
•
In the Control Panel, choose the Certificates icon.
Your 7535 G2 has certificates already preinstalled in the computer. My Certificates establish
your identity, Other Authorities certificates identify intermediate certification authorities,
and Trusted Authorities certificates establish the identity of the servers with which you
can connect.
You can import or remove certificates, and view certificate information for any listing, including names, dates, serial numbers, etc.
Note: When importing certificates, the 7535 G2 only recognizes .cer files.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
97
Chapter 5: Configuration
Display Properties
5.6.3
Display Properties
•
5.6.3.1
In the Control Panel, choose the Display icon.
Background
•
In the Display Properties dialog box, open the Background tab.
This dialog box allows you to customize your background image.
98
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Display Properties
5.6.3.2
Appearance
•
In the Display Properties dialog box, open the Appearance tab.
This dialog box allows you to customize the display colour scheme.
5.6.3.3
Backlight
The backlight is activated for a configurable amount of time if the ambient light is below a
specified threshold and if the 7535 G2 is in use (key press, scanner trigger). The Display
Properties dialog box in the Control Panel allows you to specify the intensity of the backlight along with how the backlight behaves in low-light conditions and when the unit is not
in use.
Note: Keep in mind that this option may be restricted to supervisory use only.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
99
Chapter 5: Configuration
Display Properties
•
In the Display Properties dialog box, open the Backlight tab.
Note: Backlight changes take effect immediately. You do not need to reset the unit.
To maximize battery run time, keep the display backlight brightness and active
durations as low as possible.
ON Threshold
The 7535 G2 is equipped with an ambient light sensor. This sliding bar allows you to determine how dark the ambient light needs to be before the backlight turns on.
Intensity
This parameter is used to adjust the light intensity of the 7535 G2 backlight. Sliding the bar
to the left lowers the light intensity, and sliding it to the right raises the intensity.
Bright For
The value chosen from this drop-down menu determines the duration of time that the backlight stays on at the configured intensity after the last user action (keypress, scan trigger).
Dim For
The value chosen from this drop-down menu determines the duration of time that the backlight stays on at half the configured intensity (dimmed backlight) after expiration of the
Bright For delay and as long as no user action takes place (such as a keypress or scan trigger). At the expiration of the Dim For duration, the display backlight shuts off.
100
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Display Properties
External Power Checkbox
When you select the checkbox next to When using external power keep the backlight always
ON, the backlight remains ON at the configured intensity when the 7535 G2 is operating
with external power (not battery power). If the 7535 G2 is drawing power from its battery,
this option is ignored and the other parameters defined in Display Properties dialog box
take affect.
5.6.3.4
Contrast
The Contrast tab allows you to adjust the display contrast to suit the environment in which
you are using the 7535 G2. The contrast control can also be used to reduce display flickering
that can occur with colour displays in certain lighting conditions.
•
In the Display Properties dialog box, open the Contrast tab.
•
•
Slide the bar in the Contrast tab to the left to decrease or darken the display contrast.
Slide the bar to the right to increase or lighten the display contrast.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
101
Chapter 5: Configuration
Input Panel
5.6.4
Input Panel
The 7535 G2 is equipped with at Soft Input Panel (SIP).
Soft Keyboard
Input Panel
Button Icon
Tapping on the Input Panel button displays a soft input panel (soft keyboard) that can be
customized using the Input Panel dialog box.
Important: If the Input Panel button icon is not visible in the taskbar, from the ‘Start’
menu, tap on Settings>Taskbar and Start Menu. Tap the checkbox next to
‘Show Input Panel Button’. To remove this icon from the taskbar, tap in the
checkbox to erase the check mark.
The soft keyboard operates just like a standard keyboard except that rather than pressing a
key, you tap on letters, numbers, modifier keys, etc. on the 7535 G2 screen.
To customize the appearance and behaviour of the soft keyboard:
•
102
Tap on the Input Panel icon in the Control Panel.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
Figure 5.2 Input Panel Properties
•
Tap on the Options button to change the appearance of your soft keyboard.
Note: You can also display this dialog box by double-tapping on the Input icon in the farright corner of the taskbar.
Figure 5.3 Soft Keyboard Options
5.6.5
Keyboard Properties
This icon displays the Keyboard Properties dialog box in which you can adjust the repeat
rate of the keys, the intensity of the keyboard backlight and the behaviour of the [BLUE]
and [ORANGE] modifier keys. This dialog box also allows you to define macro keys and
Unicode characters.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
103
Chapter 5: Configuration
Keyboard Properties
•
In the Control Panel, choose the Keyboard icon.
5.6.5.1 Key Repeat
Note: These settings apply when a key is held down continuously.
•
In the Keyboard Properties dialog box, open the Repeat tab.
Repeat Delay
The value assigned for this parameter determines the delay in milliseconds between repeat
characters. Sliding the Repeat Delay bar to the left increases the delay between key repeats,
and sliding the bar to the right shortens the repeat delay time.
104
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
Repeat Rate
The value assigned for the Repeat Rate parameter determines how quickly the key you press
repeats and is measured in characters per second (cps). Sliding the bar to the left slows the
repeat rate, and sliding the bar to the right increases the repeat rate.
Note: Use the field at the bottom of this dialog box to test the repeat delay and rate settings you’ve chosen.
5.6.5.2 Keyboard Backlight
•
In the Keyboard Properties dialog box, open the Backlight tab.
ON Threshold
The ON Threshold sliding bar allows you to determine how dark the ambient light needs to
be before the keyboard backlight turns on.
Intensity
This parameter is used to adjust the light intensity of the 7535 G2 keyboard backlight.
Sliding the bar to the left darkens the keyboard backlight intensity, and sliding it to the right
lightens the intensity.
Note: The keypad backlight maximum brightness will decrease over time as it ages. Use
mid-range intensity settings when possible to extend the backlight lifespan. When
the backlight starts to dim, use this parameter to make it brighter.
ON For
The value chosen from this drop-down menu determines the duration of time that the keyboard backlight stays on after the last user action (keypress or scan trigger).
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
105
Chapter 5: Configuration
Keyboard Properties
Note: Tapping in the checkbox next to ‘When using external power, keep the backlight
always ON’ forces the keypad backlight to remain on when the unit is operating
with external power.
5.6.5.3 Keyboard One Shot Modes
•
In the Keyboard Properties dialog box, open the One Shots tab.
The options in this tab allow you to determine how modifier keys on your 7535 G2 behave.
For each modifier key—[ALT], [SHIFT], [CTRL], [ORANGE] and [BLUE]—you have the
following options in the drop-down menu: Lock, OneShot, and OneShot/Lock.
Note: Keep in mind that checking the taskbar lets you know whether or not these keys are
locked on. For example, if the [ORANGE] key is locked ‘on’, the taskbar at the bottom of the screen displays it in uppercase characters, ORANGE KEY. If this key is
displayed in lowercase characters in the taskbar, you’ll know that the orange key is
not locked. It will become inactive following a key press.
Important: Once you’ve assigned a One Shot mode to a modifier key, you need to tap
on the OK button at the top of the tab to activate your selection.
Lock
If you choose Lock from the drop-down menu, pressing a modifier key once locks it ‘on’
until you press the modifier key a second time to unlock or turn it off.
106
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
OneShot
If you choose OneShot, the modifier key remains active only until the next key is pressed.
OneShot/Lock
OneShot/Lock allows you to combine these functions. When you choose this option and you
press the modifier key once, it remains active only until the next key is pressed.
If you press the modifier key twice, it is locked ‘on’, remaining active until the modifier key
is pressed a third time to turn it ‘off’.
5.6.5.4 Keyboard Macro Keys
•
In the Keyboard Properties dialog box, open the Macros tab.
A macro has 200 programmable characters (or “positions”). The macro keys can be programmed to replace frequently used keystrokes, along with the function of executable keys
including [ENTER], [BKSP] and [DEL] ([BLUE]-[BKSP]), function keys and arrow keys.
Recording And Saving A Macro
You can program up to 12 macro keys on a 58-key 7535 G2. On a 36-key 7535 G2, you can
program a maximum of 6 macro keys.
•
In the Macro menu highlight a macro key number, for example macro 1, to assign a
macro to macro key [M1]. Choose the Record button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
107
Chapter 5: Configuration
Keyboard Properties
A message screen is displayed instructing you to Enter Key Strokes to Record
•
Type the macro sequence you want to assign to the Macro key. You can type text and
numbers, and you can program the function of special keys into a macro.
• When you’ve finished recording your macro sequence, press the key sequence: [CTRL]
[ALT] [ENTER], or choose the Stop Recording button.
A new screen called ‘Verify Macro’ displays the macro sequence you created. The Save
button is highlighted.
•
Press [ENTER] to save your macro, or highlight CANCEL and press [ENTER] to
discard it.
Executing A Macro
To execute a macro:
•
Press the macro key to which you’ve assigned the macro. For example, if you created a
macro for macro key 1, press [M1] to execute the macro.
Deleting A Macro
To delete a macro:
•
•
108
In the Macros tab, highlight the macro number you want to delete.
Choose the Delete button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
5.6.5.5 Unicode Mapping
•
In the Keyboard Properties dialog box, open the Unicode Mapping tab.
The Unicode Mapping tab is used to map combinations of virtual key values and [CTRL]
and [SHIFT] states to Unicode™ values. This tab shows the configured Unicode character
along with the Unicode value. For example, the sample screen above shows “a (U+0061)”
indicating that the character “a” is represented by the Unicode value “0061”, and so on.
Keep in mind that Unicode configurations are represented as hexadecimal rather than
decimal values.
All user-defined Unicode mappings are listed in the Unicode Mapping tab in order of virtual
key value, and then by order of the shift state. If a Unicode mapping is not listed, the
Unicode mapping is mapped to the default Unicode value.
Adding And Changing Unicode Values
Important: Changes to Unicode mappings are not saved until you exit the Keyboard
Properties dialog box.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
109
Chapter 5: Configuration
Keyboard Properties
•
Choose the Add/Change button.
•
Highlight a value in the Unicode mapping list. In the sample screen above, a value will
be assigned to virtual key 0 (VK 0).
Position the cursor in the Unicode Mapping field, and type a Unicode value for the
highlighted key.
•
Note: To add a shifted state, [SHIFT] and/or [CTRL], press [TAB] to position the cursor
in the checkbox next to ‘SHIFT Pressed’ and/or ‘CTRL Pressed’. Press [SPACE] to
select the shift state you want to assign.
Removing Unicode Values
•
In the Unicode Mapping tab, highlight the item you want to delete, and choose the
Remove button.
5.6.5.6 Scancode Remapping
A scancode is a number that is associated with a physical key on a keyboard. Every key has
a unique scancode that is mapped to a virtual key, a function or a macro. Scancode Remapping allows you to change the functionality of any key on the keyboard. A key can be
remapped to send a virtual key (e.g. VK_F represents the ‘F’ key; VK_RETURN represents
the [ENTER/ON] key, etc.), perform a function (e.g. turn the scanner on, change volume/contrast, etc.) or run a macro.
There are three different tables of scancode mappings: the Normal table, the Blue table and
the Orange table. The Normal table defines unmodified key presses; the Blue table defines
110
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
key presses that occur when the [BLUE] modifier is on; the Orange table defines key
presses that occur when the [ORANGE] modifier is on. The default mappings of these scancodes can be overwritten for each of these three tables using the Scancode Remapping tab
accessed from the Keyboard Properties dialog box.
The first column in the Scancode Remapping tab displays the scancodes in hexadecimal. If
the scancode is remapped to a virtual key, that virtual key is displayed in the next column labelled ‘V-Key’. A virtual key that is ‘Shifted’ or ‘Unshifted’ is displayed in the third column
labelled ‘Function’.
If the scancode is remapped to a function or a macro, the first and second columns remain
blank while the third column contains the function name or macro key number
(e.g., Macro 2).
Adding A Remap
To add a new remapping:
•
Choose the Add button at the bottom of the dialog box.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
111
Chapter 5: Configuration
Keyboard Properties
The Remap Scancode dialog box is displayed.
•
Type the scan code in hexadecimal in the field labelled Scancode
Note: The Label field displays the default function of the scancode you are remapping.
Virtual Key, Function And Macro
The radio buttons at the bottom of the dialog box allow you to define to what the scan code
will be remapped: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force [SHIFT] to be on or off when the
virtual key is sent. If No Force is selected, the shift state is dependent on whether the shift
state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the dialog box.
•
•
Choose Virtual Key, Function or Macro.
Choose a function from the Function list in the dialog box, and tap on OK.
Editing A Scancode Remap
To edit a scancode:
•
•
•
112
In the Scancode Remapping tab, tap the stylus on the remap you want to edit.
Tap on the Edit button, and make the appropriate changes.
Tap on OK to save your changes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Keyboard Properties
Removing A Remap
To delete a remap:
•
•
In the Scancode Remapping tab, highlight the scancode you want to delete, and tap on
the Remove button.
Tap on OK.
5.6.5.7 Lock Sequence
The Lock Sequence menu allows you to lock the 7535 G2 keyboard to prevent keys from
being pressed accidentally when, for example, the unit is inserted in a holster.
•
•
•
To lock the keyboard, tap in the checkbox next to Enable key lock sequence.
Tap in the checkbox next to Keyboard locked at startup.
In the Key sequence drop-down menu, choose the key sequence you will need to type to
unlock the keyboard.
Note: It is useful to leave the ‘Show popup message’ enabled (default) so that anyone
attempting to use the keyboard will see the key sequence they will need to enter to
unlock the keyboard displayed on the screen.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
113
Chapter 5: Configuration
Manage Triggers
A locked keyboard icon is displayed in the softkey bar when the keyboard is locked.
Locked Keyboard
Icon
•
5.6.6
Type the key sequence to unlock the keyboard.
Manage Triggers
Allows users to configure how bar code scanners and other devices such as RFID readers
are triggered. You can configure the trigger ID for each trigger button for both single- and
double-click, and the double-click time.
•
114
In the Control Panel, choose the Manage Triggers icon.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Manage Triggers
•
In the Manage Triggers screen you’ll see a list of trigger mappings.
5.6.6.1 Trigger Mappings
A trigger mapping is an association between a particular key on the keyboard and a driver or
application, the module(s)—sometimes referred to as “trigger consumer(s)”—of the trigger
source. Along with keyboard keys, the external trigger (scan button) is software-based.
When the specified key is pressed, the owner (for example, a decoded scanner) is sent
a message.
Important: It is not possible to have two or more identical mappings—for example [F1]
cannot be mapped to the Non-Decoded Scanner twice—even if the trigger
type is different.
A keyboard key that is used as a trigger source will no longer generate key
data, or perform its normal function. For example, if the space button is
used as a trigger source, it will not be able to send space characters to
applications.
Double-Click
When a key is pressed and released, then pressed again within the configured time (between
0 to 1000 milliseconds), a double-click occurs. See also “Trigger-Press Type” on page 117.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
115
Chapter 5: Configuration
Manage Triggers
Show All Modules
By default, the trigger mapping list only shows active mappings. Mappings for drivers or
applications that are not currently active are not normally displayed. By checking this
checkbox, all mappings, both active and inactive, are displayed.
Add
Tapping this button brings up the Add Mapping dialog (see page 116), so that you can add
new trigger mappings.
Edit
Tapping this button brings up the Edit Mapping dialog (see page 116), so that you can edit
existing trigger mappings.
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes made. If the
cancel button X is tapped instead, or the [ESC] key is pressed, all changes made will
be discarded.
5.6.6.2 Add And Edit Trigger Mapping
These dialogs allow you to add and edit trigger mappings.
116
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Manage Triggers
Trigger Key
This drop-down list allows you to specify the source of the trigger events, such as the Soft
Scan, Left Scan, etc., for the trigger module selected.
Note: It is possible to map the same source to different modules (trigger consumers)—for
example, to both the Imager and Non-Decoded Scanner. If so, both devices/operations will occur simultaneously. This is not recommended in most cases, especially
with devices such as Imagers or RFID Readers.
It is also possible to map different sources to the same module (trigger consumer)—for example, two different trigger keys can be mapped to the RFID
File System.
Add Key
Only existing trigger sources are shown in the Source combo-box. To add a new source to
this list, tap on the Add Key button. A dialog will pop up and allow you to select the keyboard key to use as a trigger source.
Trigger-Press Type
You can enable either an Up/Down or Double Click response to a trigger press. Normally,
when a trigger (keyboard key, etc.) is pressed and released, a “trigger down” event is sent to
the “owner”—that is, the application receiving the trigger press information—followed by a
“trigger up”. If Double Click is chosen in this menu, when the trigger is pressed, released,
and then pressed again, a “double-click” event will have occurred. If a mapping with the
type Up/Down has also been configured for the same source, it will only receive the first set
of trigger events.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
117
Chapter 5: Configuration
Power Management Properties
Module Trigger
This identifies the driver or application receiving the trigger presses.
Show All Modules
By default, inactive owners are not shown. By checking this checkbox, all owners, both
active and inactive, are displayed.
5.6.7
Power Management Properties
This icon displays a Power Properties dialog box that indicates the unit’s battery capacity
and allows you to manage battery use.
•
118
In the Control Panel, choose the Power icon.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Power Management Properties
5.6.7.1 Battery Capacity
•
In the Power Properties dialog box, open the Battery tab to view battery details.
5.6.7.2 Power Saving Suspend
•
In the Power Properties dialog box, open the Suspend tab.
Power Source
This drop-down menu allows you to specify whether the unit is using AC Power or
Battery Power.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
119
Chapter 5: Configuration
Power Management Properties
Suspend Timeout
Important: Psion Teklogix recommends setting the Suspend value to 10 minutes. To
further reduce power consumption, carefully consider the duration of time
that the display backlight is ‘on’ (see “Backlight” on page 99).
When the 7535 G2 is idle—not receiving any user input (a key touch, a scan, and so on) or
system activity (serial data, an activity initiated by an application, and so on)—the handheld uses the value assigned in the Suspend Timeout field to determine when the unit will go
to sleep (appear to be off).
When the time in the Suspend Timeout field elapses without any activity, the unit enters
suspend state. In suspend state, the 7535 G2 CPU enters a sleep state, and the radio is shut
off. The state of the device (RAM contents) is preserved. Pressing [ENTER] wakes the
system from suspend state. When the 7535 G2 is in suspend state, the network connection
will not be broken immediately. If the connection is dropped, you must re-establish the
network connection.
5.6.7.3 Suspend Threshold And Estimated Battery Backup
The Suspend Threshold adjustment tells the system when to shut down when the battery
drains. If you choose Maximum Operating Time, the unit will run until the battery is completely empty; the RAM is only backed up for a short period of time. If you choose
Maximum Backup Time, the hand-held shuts off with more energy left in the battery so
RAM can be backed up for a longer period of time.
120
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Power Management Properties
Important: Selecting Maximum backup time will reserve approximately 20% of the
battery capacity for memory backup. Once the battery is drained, the system
RAM memory is lost and the unit must cold boot.
In most real-time transaction environments this is not a problem (it only
takes a few seconds to cold boot). Batch transaction environments, where
data is not saved to a non-volatile memory (such as an SD FLASH card),
may need to pay particular attention to this parameter. Psion Teklogix does
not recommend the storage of any valuable data in system RAM.
The 7535 G2 Windows CE 5.0 environment does not store any critical data
in RAM (such as the registry or file system).
If your application does not save data to RAM, Psion Teklogix recommends
keeping the Suspend Threshold setting as low as possible to maximize
battery run time.
The Estimated Battery Backup is the amount of battery power that has been reserved or set
aside to protect data until a charged battery can be installed in the 7535 G2. When the
battery capacity is depleted up to the Estimated Battery Backup reserve specified in the
Suspend Threshold menu, the 7535 G2 shuts off automatically and uses the reserve power to
preserve the data stored on the computer. Once the 7535 G2 shuts down, it cannot be
switched on until a fresh battery is installed, or the unit is inserted in a docking station
or cradle.
•
Slide the Suspend Threshold button to the right to increase the battery capacity
reserved for backup purposes. Data will be preserved to a maximum of 124 hours.
• Slide the Suspend Threshold button to the left to decrease the power reserved for
backup purposes; this increases the 7535 G2 operating time—the amount of time the
unit will operate before shutting down—but reduces the power reserved for backup purposes to a minimum of 24 hours.
Internal super-capacitors will protect the data stored in the 7535 G2 while the battery is
swapped for a fully charged one.
Important: Once the battery is removed, the super-capacitors will preserve the data
stored on the 7535 G2 for approximately 5 minutes. It is critical that you
install a charged battery before this time elapses.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
121
Chapter 5: Configuration
Power Management Properties
5.6.7.4 Calibrate
Tapping in the checkbox next to Allow Battery Calibration allows the battery to be recalibrated only when necessary if the unit is inserted in a Combo Docking station.
5.6.7.5 Advanced
Allow Suspend With:
This tab allows you to specify whether or not your unit will enter Suspend state while it is
operating with an active PPP connection, network interface, or active TCP/IP connection.
122
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Power Management Properties
Low Power Warnings
The sliding scale at the bottom of this tab allows you to specify the remaining battery capacity at which a warning message is displayed on the 7535 G2 screen, from 0% to 20%.
5.6.7.6 Devices
This tab controls power to individual CF and SDIO slots. Enable or disable the checkboxes
as needed, then tap on OK to save your changes.
5.6.7.7 Built In Devices
This tab controls power to built-in devices such as Bluetooth. Enable or disable the checkboxes as needed, then tap on OK to save your changes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
123
Chapter 5: Configuration
Stylus Properties
5.6.8
Stylus Properties
Note: Touchscreen calibration may not be enabled on your unit. If your screen appears to
require recalibration, contact your supervisor.
•
In the Control Panel, choose the Stylus icon.
5.6.8.1 Double-Tap
•
In the Double-Tap menu, follow the directions to tailor the sensitivity of the stylus when
you tap on the touchscreen.
5.6.8.2 Calibration
Touchscreens rarely require recalibration. However, if your touchscreen has never been calibrated or if you find that the stylus pointer is not accurate when you tap on an item, follow
the directions below.
124
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Volume And Sounds Properties
•
Choose the Calibration tab, and then tap on the Recalibrate button.
•
Follow the directions in the Calibration tab to recalibrate the screen.
5.6.8.3 Touch
This tab allows you to disable the touchscreen.
•
5.6.9
Choose the Touch tab. Select the checkbox next to Disable the touch panel.
Volume And Sounds Properties
•
In the Control Panel, choose the Volume & Sounds icon.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
125
Chapter 5: Configuration
Bluetooth Setup
5.6.9.1 Volume Adjustments
•
•
Slide the volume button to the left to lower the beeper volume or to the right to increase
the beeper volume.
Under the heading Enable sounds for, enable the conditions under which you want the
7535 G2 to emit a beep.
5.6.9.2 Sound Adjustments
The 7535 G2 computer is equipped with a beeper rather than a sound port. The options
under this tab are not available for this hand-held.
5.7
Bluetooth Setup
Bluetooth is a global standard for wireless connectivity for digital devices and is intended
for Personal Area Networks (PAN). The technology is based on a short-range radio link that
operates in the ISM band at 2.4 GHz. Because Bluetooth utilizes a radio-based link, it does
not require a line-of-sight connection in order to communicate.
Note: The Bluetooth radio uses an internal antenna.
The Bluetooth radio is disabled by default. Before you begin the setup process:
•
•
In the Control Panel, tap on the Power icon.
Tap on the Built In Devices tab, and tap in the checkbox next to Enable Bluetooth. Tap
on OK.
When the radio is enabled, a Bluetooth icon appears the taskbar at the bottom of the screen.
It is ready for setup.
126
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Devices
•
In the Control Panel, choose the Bluetooth Devices icon to display the Bluetooth
Manager screen.
The Bluetooth Manager dialog box displays the other Bluetooth devices with which you
can communicate.
5.7.1
Devices
If you intend to pair devices (a scanner or printer for example), power on and bring the
devices within 5 m (16.4 ft.) of the 7535 G2 before proceeding with the discovery process
described below.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
127
Chapter 5: Configuration
Devices
Pairing A Device
To pair devices:
•
Follow the manufacturer’s instructions to place the device you want to pair in
pairing mode
• Choose the Devices tab and Scan for devices in your area.
• When the scan is complete, highlight the device you want to pair with and either doubleclick or press the Services button.
• If a PIN dialog box appears, type your PIN and tap on OK.
After entering the device PIN number, the Services dialog appears with a list of services
available on that device.
•
To select a service, double-click on the service you want, or highlight the service and
press the space bar.
• In the drop-down list of options available, choose Active to pair the device.
A COM/BSP port name will appear next to the service for this device. Your device is
now paired.
Scan
•
Click on the Scan button to list available devices.
Wait for the 7535 G2 to complete its scan (approximately 20 seconds). When scanning
starts, the Scan button will change to Stop—if necessary, you can tap on this button to stop
the process. Once scanning is complete, all discovered devices will be displayed in the list
box, with Name, Address, Active status, and PIN information.
128
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Devices
Note: During the scanning process, addresses are located first, followed by names. Only
the names of devices that are within the Bluetooth radio coverage range will
be retrieved.
The Active column indicates whether any service is activated for that device. When a service
is activated, the device is displayed in the list even when it is not detected during the scan.
The PIN column indicates whether you have a PIN (password) set for the device.
At this point you can either query for services or set the PIN for each device. Once you highlight a device in the list box, both the Services and Set PIN buttons become available.
Services
A discovered device may display several service profiles that it can use to communicate, and
you will want to activate the type you need. Supported profiles that can be activated include:
DUN (Dial-Up Networking service), Printer (serial service), and LANPPP (LANAccessUsingPPP service). ASync (ActiveSync) is another available profile.
•
To start the service scan, highlight a device in the Devices menu list, and then click on
the Services button or double-click on the device entry.
Note: If the remote device is out of reach or turned off, it can take a considerable amount
of time for the Services dialog box to appear—it may appear to be frozen.
Once the device’s service profiles are displayed in the Services list box:
• Highlight the service to be activated.
• Press [SPACE] or right-click to display the Activation menu.
The Activation menu contains four options: Activate, Authenticate, Outgoing, and Encrypt.
Once the service is successfully activated, the assigned port (if applicable) will appear in the
Port column of the Services list box. You can choose to use BSP or COM as the port name.
BSP is the latest Microsoft Bluetooth stack standard, but older applications assume serial
ports are COM. When using COM as the port name, the Bluetooth manager will try to find
and use a free port between COM7 and COM9. When using BSP as the port name, BSP2 to
BSP9 are available for use. The port is available as soon as it is activated.
Note: The CH column shows the RFCOMM channel of the service if the service is
RFCOMM-based. This information is not generally needed except for
debugging purposes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
129
Chapter 5: Configuration
Devices
To add a service to the Outgoing port, an active service must first be deactivated. Then you
can choose the Outgoing option from the Activation menu (highlight a service, right-click
or press the [SPACE] bar to display the Activation menu).
The Authentication and Encryption options can be changed only before activation. To
change these after activation, deactivate the service first, then change the options.
Once a service is activated, all the information regarding the service, including the
RFCOMM channel number, is saved in the registry. (Some remote devices may change their
RFCOMM channel numbers when they reboot, so your saved setting may not work when
the remote device is rebooted. In that case, you must deactivate the service and reactivate it
to detect the current RFCOMM channel.)
Set PIN
PINs can be set for each device by pressing the Set PIN button in the Devices menu, or you
can skip this step and try to connect to the device first.
Important: The remote device must have authentication enabled, otherwise the PIN
authentication will fail.
• Highlight a device, click on the Set Pin button, and type the PIN.
You will receive a message, either that the PIN has been successfully validated or that it has
been rejected.
If the PIN has been validated, an asterisk (*) appears in the PIN column in the Devices list
box, indicating that this device has a PIN set. Once a PIN is entered, it is saved in
the registry.
To remove the PIN:
• Choose Set PIN, and press [ENTER].
If the 7535 G2 attempts to connect to a remote device that has Authentication enabled and
does not have a required PIN set, an Authentication Request dialog box appears.
•
130
Enter the PIN, and tap on OK to connect the devices.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Headset
5.7.2
Headset
To pair a headset with your 7535 G2:
•
Place your headset in Discoverable mode. You can do this by following the manufacturer’s instructions in your headset’s user guide.
• Search and discover your headset. Choose the Devices tab in Bluetooth Manager and
scan for devices in your area. (Note that if this is your first time pairing, the device scan
occurs automatically—you do not need to tap on the Scan button to perform a scan.)
When the scan is complete, a list of discovered devices is listed.
•
Search for your device’s services. You can do this by double-clicking on the headset or
you can highlight headset and tap on the Services button.
• If the headset has authentication enabled, a dialog box appears requesting that you enter
a PIN number. Enter the PIN number and tap on OK.
• Select a service to which you want to connect. You can do this by pressing and holding
the stylus over the desired service. Once the pop-up menu has appeared, choose Active.
Your headset is now paired. A COM/BSP port name will now appear beside the service for
this device. An asterisk will appear under the Active list in the Services screen.
Connect
Tap on Connect to establish a data connection between the 7535 G2 and the Bluetooth
headset.
Open Audio
Tap on Open Audio to establish the audio connection between the 7535 G2 and the
Bluetooth headset. The headset is then able to change the volume of the speaker and microphone on the computer. In order to open the audio streams, you will first have to Connect.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
131
Chapter 5: Configuration
Servers
5.7.3
Servers
When the Bluetooth connection is initiated from your 7535 G2 to the remote device, the
7535 G2 is called the ‘client’ and the remote is called the ‘server’. The Servers menu displays the server profiles that can be activated in your 7535 G2. There are currently two
server profiles available: Serial and Scanner.
•
Tap on the checkbox to activate the server, and it will display the associated port name
beside the server name.
Once you activate a server profile, it is recommended that the 7535 G2 be rebooted before
you try to bond from a server.
Note: You do not need to reboot if you are deactivating a server.
132
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Outgoing
5.7.4
Outgoing
Outgoing Port acts as a serial port that can be used to connect to a list of Bluetooth devices
(one at a time), but you have the freedom to switch on-the-fly.
The Outgoing Port checkbox allows you to create the Outgoing port. When the port is created, the Outgoing tab lists the port name.
The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The * column
indicates the currently selected service. You can tap on Unselect to reset the current selection, or you can tap on Select to make a selection. The Remove button deletes the service
from the outgoing list.
The Prompt menu determines the behaviour of the pop-up Selection menu. Choosing Everytime causes the Selection menu to be displayed each time an outgoing port is created. If you
choose Once, the menu is displayed only when a partner service is not selected.
To display the Selection menu at any time:
• Press [CTRL] [ALT] [F1], and switch the partner Bluetooth device.
If a connection to a partner device already exists, the connection is dropped and another connection to the newly selected device is created instantly without disrupting the application
that has opened the outgoing port.
Note: To add a service to the Outgoing port, an active service must first be deactivated.
Then you can choose the ‘Outgoing’ option from the Activation menu (highlight a
service, right-click or press the [SPACE] bar to display the Activation menu).
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
133
Chapter 5: Configuration
Active Conn.
5.7.5
Active Conn.
The Active Conn. menu lists the Name, Address, and Type of the currently active connections. The table is periodically updated, but it can take a few seconds before it reflects the
actual list of connections. The Type column of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for scanning as well as the service connections.
Note: You can change the device-name and description of your radio by clicking on the
System icon in Control Panel, which will open the System Properties dialog box.
Click on the Device Name tab to access the menu and change your settings. Then
click on OK.
Although the name will have changed in the Properties menu in Bluetooth Controls,
the radio only reads it on boot-up. For the changes to take effect, you must cold
reset the 7535 G2 (for cold reset instructions, see “Cold Reset” on page 35).
134
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Properties
5.7.6
Properties
The Properties menu displays information about your 7535 G2, and provides some
port options.
The Device Name field shows the device name of your 7535 G2. This name can be changed
(see the Note on the previous page for details).
Device Class shows the Class of Device (e.g. desktop, hand-held), which is always set to
Handheld.
Local Bluetooth Address shows the address of your 7535 G2 radio.
Port Prefix is used to set the port name to either BSP or COM. When the name is set to BSP,
BSP2 to BSP9 are available for activated services (including the server). When COM is
chosen, COM7 to COM9 are available.
NQuery Retry (Name Query Retry) governs the number of times the hand-held will attempt
to query the names of other Bluetooth devices if the first attempt fails. (When the 7535 G2
scans for other devices, it sometimes fails to scan names.)
Note: Keep in mind that setting this parameter to a higher value will lengthen the
scan time.
The option Hide this device from others prevents other devices from connecting to your
7535 G2.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
135
Chapter 5: Configuration
Search For
5.7.7
Search For
The Search For menu allows you to specify the services for which the Bluetooth radio
will scan.
5.8
Error Reporting
Error Reporting allows you to enable or disable Microsoft error reporting prompts.
•
136
Tap on Start>Settings>Control Panel>Error Reporting icon to access your options.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
IPv6 Support
5.9
IPv6 Support
The IPv6 Support icon in the Control Panel allows you to activate IPv6 network support on
your unit if your network setup requires this. This internet protocol specification (version 6)
supports 128-bit IP addresses, replacing version 4.
•
Choose the IPv6 Support icon to display the associated dialog box.
•
Choose the checkbox next to Enable IPv6 Network Support to enable this
internet protocol.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
137
Chapter 5: Configuration
Scanner Settings
5.10
Scanner Settings
The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can
tailor bar code options and choose the bar codes your scanner will recognize. The parameters are preset with the default settings of the decoded scanner installed in the unit.
For a listing of available scanners and their specifications, please refer to Chapter 7:
“Specifications”.
138
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Bar Codes
5.10.1 Bar Codes
5.10.1.1 Scanner
The drop-down menu to the right of the Scanner option allows you to choose configurations
for one of the following scanner types, depending on what is installed in/on your hand-held:
Decoded (internal), Decoded (Intermec ISCP), Imager and Non-decoded.
The symbologies listed in the Barcodes tab change to reflect the scanner you choose and the
bar codes it supports. Always defer to your bar code scanner’s programming manual when
in doubt about the availability or settings for any parameter.
Note: Your 7535 G2 comes preconfigured from the factory for internal scanner types. The
type of scanner installed can be determined from the System icon in the Control
Panel, under the System Properties tab.
Important: To improve the decode speed and performance, enable (set to ‘on’) only
those codes that are required by the application.
For information on configuring the bar code symbologies, see Appendix C:
“Bar Code Settings”.
Keep in mind that some bar code types are only available when an internal imaging scanner
is installed. All internal scanners can be configured using these dialog boxes. External, nondecoded scanners are also configured through the Scanner Properties dialog box.
However, external decoded scanners must be configured by scanning special configuration
bar codes. In these cases, the scanner manufacturer provides programming manuals for configuration purposes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
139
Chapter 5: Configuration
Bar Codes
Restoring Default Settings
•
•
For the Symbol LS3408 decoded scanner, refer to the programming guide supplied with
your scanner.
For PowerScan® (PSC) decoded scanners, refer to the PowerScan Programming
Guide.
5.10.1.2 Restoring Default Settings
If you want to restore the factory defaults after making changes, the defaults can be applied
to a selected parameter, sub-tree of parameters or all scanner parameters.
•
Press and hold the stylus on a symbology (e.g., Code 128) to display a pop up a menu.
•
Choose Default subtree to reset only the parameters in the symbology you selected, or
choose Default all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
140
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Options
•
Press and hold the stylus on the parameter you want to reset.
•
Choose Default parameter to reset the parameter to the default setting.
5.10.2 Options
This tab allows you to tailor the double-click parameters and the display options associated
with your scanner.
5.10.2.1 Double Click Parameters
Click Time (msec)
This parameter controls the maximum gap time (in milliseconds) for a double-click. If the
time between the first and second clicks of the scanner trigger is within this time, it is conPsion Teklogix 7535 G2 Hand-Held Computer User Manual
141
Chapter 5: Configuration
Options
sidered a double-click. The allowable range is 0 to 1000. A value of zero disables this
feature.
A double-click produces different results depending on whether or not a value is assigned in
the “Click Data” parameter. When a value is not assigned for the “Click Data”, double-clicking the scanner trigger overrides the target dot delay set in the “Dot Time” parameter and
initiates a normal scan sweep. If a value is assigned for the “Click Data” parameter, doubleclicking the scanner trigger inserts the “Click Data” value rather than initiating a scan.
Click Data
For both integrated and external scanners, this parameter determines which character is sent
to the application installed in your 7535 G2 following a double-click. A dialog box appears,
asking that you press the key you want to insert. The ASCII/Unicode key value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.
5.10.2.2 Display Parameters
Scan Result
When this parameter is enabled, the type of bar code and the result of the scan appear on the
screen. Note that this information is only displayed after a successful decode and is visible
only while the scanner trigger is pressed. When the trigger is released, this information is
cleared from the screen.
Scan Indicator
When this parameter is enabled, the laser warning logo appears on the display whenever the
scanner is activated.
Scan Result Time (sec)
The value assigned to the Scan Result Time parameter determines how long the scan results
of a successful scan are displayed on the screen. Time is measured in seconds, and a value of
0 (zero) disables the parameter. When you choose this option, a dialog box appears where
you can enter a value.
Note: To remove the scan result from the screen before the “Result Time” has expired,
point the scanner away from the bar code and press the trigger.
142
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Translations
Good Scan Beep And Bad Scan Beep
These parameters determine whether or not the 7535 G2 emits an audible scanner ‘beep’
when a good (successful) scan or a bad (unsuccessful) scan is performed. Set these parameters to either on to enable the beeper or off to disable it.
Soft Scan Timeout
This parameter is used by the SDK “Scan” function (soft-scan: starting a scan session via the
SDK function, instead of a physical user trigger press). The value assigned to this parameter
determines the soft-scan timeout from 1 to 10 sec (default is 3 sec).
Scan Log File
If this parameter is enabled, the input bar code and the modified/translated output bar code
are logged in the file \Flash Disk\ScanLog.txt. Keep in mind that if Scan Log File is enabled,
there is a slight performance reduction when performing multiple scans since the log file is
written to persistent storage.
5.10.3 Translations
The Translations menu allows you to define up to 10 cases, each consisting of up to 10 rules
in sequential order. Only one case will be applied to a bar code and a case will only be
applied if all rules specified in the case are successful—if a rule within a case fails, the entire
case fails.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
143
Chapter 5: Configuration
Translations
144
•
In the Translation menu, tap on the Case # to create rules.
•
Tap on the No rule drop-down menu to display the rules.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Translations
When you choose a rule, an associated screen is displayed in which you can define the rule.
5.10.3.1 Case Rules
The case rules are defined as follows:
•
•
•
•
•
•
•
No rule—ignored.
Search and replace—replaces all instances of the match string. (Note that this rule
cannot fail.)
Match at index—matches the match string at a specified index.
Match and replace at index—matches the match string at a specified index and
replaces/changes it.
Replace at index—replaces/changes unspecified data in a given range.
Add barcode prefix/suffix—adds a global prefix or suffix.
Verify barcode size—verifies the bar code size. This rule should generally be assigned
first, before creating subsequent rules.
Note: Keep in mind that the effects of previously applied rules must be taken into account
when creating subsequent rules. For example, if the bar code size is important, it
should be checked before any rules that might change the size are applied.
Translation information about the status of each case/rule is displayed in the scan log file
(see “Scan Log File” on page 143) when enabled. This is useful if a case fails, and you are
trying to determine why a rule is failing.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
145
Chapter 5: Configuration
Ports
5.10.4 Ports
Figure 5.4 Tether, Console, and Port Replicator Port Settings
While you cannot configure the scanner, you can configure communications with a serial
decoded scanner using the options in this tab.
Use these settings to ensure that the communication ports on the 7535 G2 match the settings
of the serial devices to which they are connected. If the settings do not match exactly, the
devices may not function. Note that some devices can auto-detect serial port settings (such
as baud rate), and in this case the 7535 G2 will dictate the settings. Baud rates often have a
direct impact on performance—they should be set as high as possible while still ensuring reliable communication.
146
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Ports
5.10.4.1 Tether Port (COM1)
Note: RS-232 serial communication is one of the modes available on the tether port,
located on the side of the 7535 G2.
These parameters refer only to external decoded scanner communications. They
have no effect if the generic serial device tether cable is plugged in.
Baud
Double-tapping on this parameter displays a pop-up window in which you can choose an appropriate rate of data transfer.
Figure 5.5 Tether Port Baud Rates
Data Bits
This parameter determines the number of data bits included in each asynchronous data byte.
Most devices use 8-bit data bytes. Double-tapping on this option displays a pop-up window
in which you can choose either 7 or 8 data bits.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
147
Chapter 5: Configuration
Ports
Parity
This parameter determines the type of parity checking used on the data going through the
tether port. Double-tapping on this option displays a pop-up window in which you can
choose the appropriate Parity.
Stop Bits
This parameter specifies the number of stop bits—1, 1.5 or 2—used for asynchronous
communication.
5.10.4.2 Console Port (COM3)
The console port is accessed via the docking connector on the bottom of the 7535 G2. Only
the Portable Docking Module (PDM) provides access to the console port through a DE-9
interface.
Figure 5.6 Console Port Settings
Enabled
This parameter must be set to on in order for the 7535 G2 to recognize the attached device
as a decoded bar code scanner.
Baud
Refer to page 147 for details.
148
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Ports
Data Bits
Refer to page 147 for details about this parameter.
Parity
For details, refer to page 148.
Stop Bits
Refer to page 148 for details about Stop Bits.
5.10.4.3 Port Replicator Tether (COM6)
The port replicator tether is a duplicate tether port located on the port replicator module of
the 7535 G2 cradles.
Figure 5.7 Port Replicator Tether Settings
Baud
Refer to page 147 for details.
Data Bits
Refer to page 147 for details about this parameter.
Parity
For details, refer to page 148.
Stop Bits
Refer to page 148 for details about Stop Bits.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
149
Chapter 5: Configuration
Ports
5.10.4.4 Port Replicator Port A (COM5)
Port Replicator Port A(COM5) is the standard RS-232 DE-9 DTE port on the 7535 G2 port
replicator module, available on certain cradle types.
Enabled
This parameter must be set to ON in order for the 7535 G2 to recognize the device connected to the Port Replicator 9-pin (COM5).
Baud
Refer to page 147 for details.
Data Bits
Refer to page 147 for details about this parameter.
Parity
For details, refer to page 148.
Stop Bits
Refer to page 148 for details about Stop Bits.
150
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
SNMP (Simple Network Management Protocol) Setup
5.11
SNMP (Simple Network Management Protocol) Setup
Simple Network Management Protocol (SNMP) is the protocol used to monitor and manage
devices attached to a TCP/IP network (providing they support SNMP).
SNMP uses Management Information Bases (MIBs) that define the variables an SNMP
Network Management Station can access. Each product has a defined set of MIBs that determine how SNMP operates, the type of access allowed and so on.
All Psion Teklogix products support the TEKLOGIX-GENERIC-MIB—a MIB that defines
some common features across Psion Teklogix products.
All devices also support MIB-II, a management information base that defines the common
features of TCP/IP networks. The SNMP Agent software embedded in the 7535 G2 product
supports SNMPv1 (RFC 1157).
•
In the Control Panel, choose the SNMP icon.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
151
Chapter 5: Configuration
Contact
5.11.1 Contact
The SNMP dialog box is displayed.
Contact
This field identifies the contact person for this managed node along with information about
how to get in touch with this person. The content of this parameter is accessible through
MIB-II’s sysContact object.
Location
This parameter is used to identify the physical location of this node (e.g., Warehouse A:
Pillar 32B). The content of this parameter is accessible through MIB-II’s sysLocation object.
152
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Communities
5.11.2 Communities
The Communities tab allows you to limit access to SNMP-managed devices to those SNMP
Managers with matching “community names”, as specified by RFC 1157.
Enable SNMP
Tapping the checkbox Enable SNMP allows the device to respond to SNMP queries and to
send Traps. After enabling this option and rebooting the device, the SNMP Agent will automatically start up. To disable this feature, remove the checkmark from the checkbox.
5.11.2.1 Adding A Community
•
Choose the Add button to add a new ‘community’.
Name
The value assigned here is the name assigned by the network administrator to the set of
devices to which this managed node belongs.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
153
Chapter 5: Configuration
Communities
Rights
This menu allows you to specify access, that is, ‘Read-Only’ or Read-Write’
5.11.2.2 Modifying A Community Setting
To modify an existing community:
•
•
Highlight the community you want to alter.
Choose the Change button.
A Modify Community dialog box is displayed, listing the community you highlighted.
•
Edit the Name and/or Rights, and press [ENTER] to save your changes.
5.11.2.3 Removing An Existing Community
To remove an item:
•
Highlight the community you want to remove in the Communities tab and then choose
the Remove button.
A Delete Confirmation screen is displayed.
• To remove a community, choose the Yes button, or
If you decide not to remove the community, choose the No button.
154
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Trap Destination
5.11.3 Trap Destination
A trap is an unsolicited report sent to SNMP Managers by the SNMP Agent running on the
managed node. This option allows you to define where the report will be sent.
5.11.3.1 Enabling Authentication TRAPS
Enabling Enable Authentication TRAPS allows authorization traps to be sent when a failure
is detected (e.g., an SNMP message received with a bad community name).
5.11.3.2 Adding A Destination
To add a new destination:
•
Choose the Add button.
•
Type a destination in the text box provided, and press [ENTER].
5.11.3.3 Changing A Destination
To change an existing trap destination:
•
Highlight the destination you want to alter in the Trap Destination tab, and then choose
the Change button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
155
Chapter 5: Configuration
Permitted Hosts
A dialog box like the one displayed when you add a destination is displayed.
•
Make the changes to the destination, and press [ENTER] to save the changes.
5.11.3.4 Removing A Trap Destination
To remove a trap destination:
• In the Trap Destination tab, highlight the destination you want to delete.
• Choose the Remove button.
A Delete Confirmation screen is displayed.
• To remove a destination, choose the Yes button, or
If you decide not to remove the destination, choose the No button.
5.11.4 Permitted Hosts
For security reasons, the Network Administrator may want to restrict SNMP-node access to
a known sub-set of SNMP Managers. This tab lists the IP addresses of all the SNMP Managers which are allowed to monitor and manage this device. If no entries are listed, the
device will accept SNMP queries from any host.
156
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Permitted Hosts
5.11.4.1 Adding A Host
To add a new host:
•
Highlight the Add button, and press [ENTER].
•
Type a new host IP address in the text box provided, and press [ENTER].
5.11.4.2 Changing A Host
To change an existing host IP address:
•
Highlight the IP address you want to alter in the Permitted Hosts tab, and then choose
the Change button.
A dialog box like the one displayed when you add a host is displayed.
•
Make the necessary changes, and press [ENTER].
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
157
Chapter 5: Configuration
The Storage Manager
5.12
The Storage Manager
The Storage Manager allows you to view information about the storage devices that are
present in the 7535 G2, such as SD-MMC flash cards and Compact Flash cards.
5.12.1 Formatting A Memory Card
Formatting a memory card bulk-erases it. Once a card is erased, partitions may be created in
it, similarly to those on a hard drive. Memory-card devices are normally ‘mounted’ (made
available to the system) automatically when they are inserted. They must be dismounted
before they can be formatted.
To format an entire memory card:
1. Select Start> Settings>Control Panel.
2. In Control Panel, double-click on the Storage Manager icon. The Storage Manager
menu opens:
158
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Creating Partitions
3. Select the memory card from the drop-down list.
4. Press the Dismount button to dismount the memory card. All partitions on the card
will be dismounted.
5. Press the Format button to format the memory card.
All partitions and information on the card will be erased during the formatting process.
5.12.2 Creating Partitions
Once the card is formatted, new partitions can be created in it. The default is to create one
partition that occupies the whole card, but a card can be divided into more than one partition
if desired. Each partition appears as a separate folder in Windows Explorer.
To create new partitions:
1. Press the New button next to the Partitions list box. The Create New Partition dialog
box appears:
2. Type a name for the partition.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
159
Chapter 5: Configuration
Partition Management
3. If more than one partition is desired, uncheck the Use All Available Diskspace
checkbox, then specify the desired number of sectors to be used by the partition.
4. Press OK. The new partition appears in the Partitions list:
The new partition is automatically mounted. This is indicated by an asterisk (*) next to its
name in the partition list. Any unallocated space on the card is indicated at the left, and additional partitions can be created in it.
5.12.3 Partition Management
Partitions can be individually dismounted, mounted, deleted, or formatted as well. These
and additional tasks are available from the Partition Properties dialog:
160
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Partition Management
To dismount a partition:
1. Choose the desired partition.
2. Tap the Properties button. The Partition Properties dialog appears.
3. Tap the Dismount button. The partition is dismounted. The asterisk disappears next
to its name in the partitions list.
To delete a partition:
1. Select the desired partition.
2. Tap the Delete button. A warning dialog appears.
3. Tap the OK button. The partition is deleted.
To format a partition:
1. Choose the desired partition.
2. Tap the Properties button. The Partition Properties dialog appears.
3. Tap the Dismount button. The partition is dismounted. The asterisk disappears next
to its name in the partitions list.
4. Tap the Format button. The Format dialog appears:
5. Choose your format options. These options include:
• Version of file system (FAT-16, for devices holding up to 4 GB; or FAT-32, for
devices containing up to 32 GB).
• Number of FATs (File-Allocation Tables).
• Number of entries allowed in the root directory.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
161
Chapter 5: Configuration
Teklogix Error Handling Service
• Cluster size (.5 KB to 64 KB).
There are also two checkboxes, which govern:
• Whether to use the transaction-safe FAT file system (TFAT). This file system keeps
multiple copies of the file-allocation table, changing one while maintaining another
as a backup.
• Whether to perform a quick format. Quick formatting removes all reference to data in
the partition without erasing the actual partition. The partition will be treated as
empty, and new data will overwrite it.
6. Tap Start. The partition is formatted.
To mount a partition:
1. Choose the desired partition.
2. Tap the Properties button. The Partition Properties dialog appears.
3. Tap the Mount button. The partition is mounted. The asterisk appears next to its
name in the partitions list.
The Partition Properties dialog has buttons for additional functions. Partitions can be defragmented, and their file structure can be scanned.
5.13
Teklogix Error Handling Service
Teklogix Error Handling Service is an error diagnostic tool that allows Psion Teklogix to
deliver more reliable software. When an error occurs, information about that error is saved
in a file which can be sent to Psion Teklogix support personnel to help diagnose the
problem.
•
Tap on Start>Settings>Control Panel. Tap on the Teklogix Error Handling
Service icon.
On the Status tab, tapping in the checkbox Enable error reporting enables this service.
162
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
ErrorLogInfo
5.13.1 ErrorLogInfo
•
To log an error, tap on the ErrorLogInfo tab.
•
Choose an Error Level, and tap on FlushToFile to log the information file.
5.13.2 NetLog
The NetLog option is used to log network traffic. When you tap in the checkbox to the left
of Enable NetLog Debug Capturing, debug data is collected so that, if necessary, it can be
forwarded to a Psion Teklogix technician for evaluation. You can also define where you
want the data stored and the maximum size of the file.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
163
Chapter 5: Configuration
Teklogix Imagers
5.14
Teklogix Imagers
The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings.
The principle uses of the applet are to decode bar codes and to capture images. A PTSI
Imager demo applet is also provided to illustrate how the imager works.
Refer to Appendix D: “Teklogix Imagers Applet” for configuration details.
To launch this applet:
•
In the Control Panel, choose the Teklogix Imagers icon.
Note: This icon is only displayed when the appropriate imager is installed in
your 7535 G2.
164
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Total Recall
5.15
Total Recall
Total Recall is a Psion Teklogix utility developed to maintain applications and settings
during a cold boot. This utility is based on a backup and restore concept. This utility is based
on a backup and restore concept
•
In the Control Panel, choose the Total Recall icon.
5.15.1 Creating A Backup Profile
In the drop-down menu, you can choose from four options: Create Backup Profile, View Selected Profile Data, Restore Selected Profile and Delete Selected Profile. Keep in mind
however that until a profile is created, the only available option is Create Backup Profile.
•
Choose the Next button to begin the process.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
165
Chapter 5: Configuration
Creating A Backup Profile
Profile Information
This dialog box lists the possible storage destinations for the profile file.
1. To begin, type a name for the profile in the field labelled Profile Name.
2. Choose the Profile Type you want to create:
For this device only—creates a backup that is manually restored by the operator.
AutoRestore for this device only—creates a profile that automatically restores itself following a restart.
AutoRestore for this and other devices—creates a profile that automatically restores
after resuming from a restart, but it will not contain the touchscreen calibration coordinates or the Wireless radio settings.
3. Finally, choose the Profile Location: \Flash Disk.
4. Tap on the Next button to display the next dialog box Add Files.
166
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Creating A Backup Profile
Add Files
By default, All Files is selected so that all installed or copied files, database entries, and the
Registry will be saved. You can, however, limit the backup to databases, and/or the registry
only. By tapping the checkbox next to these items, you can add or remove a check mark to
enable or disable the option.
The Select Files option allows you to select predefined file types.
•
•
Remove the check mark next to All Files. You’ll notice the checkbox next to Select
Files changes , indicating that additional options are available.
Choose this icon next to Select Files to view your options.
Choosing By Individual File displays a pop-up menu where you can tailor the list of files
you want to back up.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
167
Chapter 5: Configuration
Creating A Backup Profile
To add a file to your backup list:
• Choose Add Files. Browse to and choose the files you want to add to your list.
To remove a file from your backup list:
• Choose Remove Files—a dialog box is displayed listing the files that will be backed up.
• Highlight the item you want to remove from the list, and tap on the Remove button.
Choosing By File Type allows you to select the file types that you want backed up.
168
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Restoring A Profile
View Selections
Depending on what you have selected for inclusion in your profile, you can view a list of the
selected files, databases and/or registry.
•
Choose the Next button to perform the operation.
Perform The Operation
•
Choose the Backup button to start the process, and create a profile.
5.15.2 Restoring A Profile
To manually restore a profile:
•
Choose Restore Selected Profile from the drop-down menu, and choose the Profile
Name displayed in the drop down box.
Note: You can also manually restore an auto restore profile located in flash or a
storage device.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
169
Chapter 5: Configuration
TweakIT Settings
5.16
TweakIT Settings
This utility allows you to ‘tweak’ or adjust Advanced system settings (interface, network,
servers, driver, and radio), User settings (Internet Explorer settings, font size, and docking
port message), and provides a Registry Editor.
5.16.1 Advanced
5.16.1.1 Advanced Interface And Network
Enable IPv6
This option allows you to enabled Internet Protocol specification, version 6, that has been
published to use 128-bit IP address (replacing version 4).
170
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Advanced
Modem Logging
When this option is enabled, the 7535 G2 logs AT commands (e.g., dial-out information,
password string, etc.) that the administrator can monitor for debugging purposes. Modem
commands are stored in: \MdmLog.txt.
5.16.1.2 Advanced Services Settings
FTP Server
This option is enabled by default to allow file transfers. Keep in mind that data transfer in
either direction is restricted to the Temp folder—that is, data are always loaded from the
FTP Server to the Temp folder and from the Temp folder to the FTP Server.
If this option is disabled, a warm reset must be performed to accept the change.
SNTP (Simple Network Time Protocol) Server
The SNTP Server Name typed in this dialog box is used to synchronize 7535 G2 time with
the time server time. A warm reset must be performed once the server name as been entered.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
171
Chapter 5: Configuration
Advanced
5.16.1.3 Advanced Intermediate Driver
Intermediate Driver Support
The 7535 G2 employs a custom intermediate driver that is used to indicate radio transmission and reception on its LEDs. As well, the intermediate driver is employed to support the
Psion Teklogix 802.IQ v1 protocol. This TweakIt option is included to allow the driver to be
disabled in cases where it interferes with third party drivers or security supplicants. By disabling the intermediate driver the Rx/Tx LEDs will no longer illuminate.
Important: If 802.IQ v1 is required, this driver must not be disabled.
172
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Advanced
5.16.1.4 Radio Features
AP Density
This option allows you to determine the signal strength at which the 7535 G2 radio will
begin searching for a new Access Point (AP): High, Medium or Low. If, for example, this
option is set to High, the radio will begin searching for a new Access Point while still at a
fairly strong signal strength. Setting AP Density to Low will cause the radio to wait until the
signal strength is significantly low before attempting to connect to another Access Point.
Depending on your site configuration—for example, the shelving, the Access Point coverage, etc.—a higher setting may improve through-put, increase and maintain signal strength,
and reduce missed transmissions.
Radio Power Management
When this option is enabled, access points that support it will use Radio Power Management
guidelines to control the client (7535 G2) radio. Access points determine how often the 7535
G2 radio enters sleep mode when no activity is detected to reduce power consumption on
the client side. Another benefit is that when Radio Power Management is enabled, even
when no activity is detected, the access point does not disassociate the 7535 G2 (client).
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
173
Chapter 5: Configuration
User
5.16.2 User
5.16.2.1 Internet Explorer Settings
This option allows you to customize how your Internet Explorer is displayed and how the
tabbing functions.
5.16.2.2 User Display Settings
174
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
User
User Font Size
This option allows you to adjust the size of the font used the 7535 G2 display: Large,
Normal or Small.
5.16.2.3 User System Settings
Docking Port Message
Checking this box blocks the message that normally pops up on the display when the 7535
G2 is docked.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
175
Chapter 5: Configuration
Registry Editor
5.16.3 Registry Editor
This option is reserved for senior administrators who have a strong understanding of registry
keys and values. Careless registry editing can cause irreversible damage to the 7535 G2.
176
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
6
PERIPHERAL DEVICES & ACCESSORIES
6.1 External Bar Code Readers. . . . . . . . . . . . . . . . . . . . . .
6.1.1 PowerScan® Standard, LR and XLR Bar Code Scanners .
6.1.2 Entering Data With The Bar Code Reader . . . . . . . . .
6.2 RD7950 Integrated UHF RFID Reader . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.179
.179
.179
.179
6.3 Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180
6.4 Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.4.1 Battery Gas Gauge Calibration. . . . . . . . . . . . . . .
6.5 Gang Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . .
6.5.2 Operator Controls . . . . . . . . . . . . . . . . . . . . .
6.5.3 Charge Indicators. . . . . . . . . . . . . . . . . . . . . .
6.5.4 Charging Batteries . . . . . . . . . . . . . . . . . . . . .
6.5.5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . .
6.5.5.1 Excessive Charge Duration . . . . . . . . . . . .
6.5.5.2 Improper Battery Storage . . . . . . . . . . . . .
6.5.5.3 Indicator Flashing Red . . . . . . . . . . . . . .
6.5.5.4 Power LED Does Not Light Up. . . . . . . . . .
6.5.5.5 Indicator Does Not Light When Battery Installed
6.6 Combo Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . .
6.6.2 Operator Controls . . . . . . . . . . . . . . . . . . . . .
6.6.3 Using the Combo Charger With The 7535 G2 . . . . . . .
6.6.4 Charging The Spare Battery . . . . . . . . . . . . . . . .
6.6.5 Charge Indicators. . . . . . . . . . . . . . . . . . . . . .
6.6.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . .
6.7 Combo Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.7.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . .
6.7.2 Using The Combo Dock . . . . . . . . . . . . . . . . . .
6.7.3 Network Access . . . . . . . . . . . . . . . . . . . . . .
6.7.4 Troubleshooting . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.180
.180
.181
.181
.182
.182
.183
.183
.183
.183
.184
.184
.184
.184
.184
.185
.185
.185
.186
.186
.186
.186
.186
.187
.187
177
6.8 Quad Dock. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.8.1 Installation. . . . . . . . . . . . . . . . . . . . . . . .
6.8.2 Indicators And Controls . . . . . . . . . . . . . . . . .
6.8.3 Using The Quad Dock. . . . . . . . . . . . . . . . . .
6.8.4 Network Access . . . . . . . . . . . . . . . . . . . . .
6.8.4.1 Network Addressing . . . . . . . . . . . . . .
6.8.5 Battery Charging . . . . . . . . . . . . . . . . . . . .
6.8.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . .
6.8.6.1 Network Link Unsuccessful . . . . . . . . . .
6.8.6.2 7535 G2 LED Does Not Light When Docked .
6.9 Portable Docking Module (PDM). . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
187
187
188
188
188
189
189
189
189
189
190
6.10 Bluetooth Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
6.11 The 7535 G2 Picker Cradle . . . . . . . . . . . . . . . . . . .
6.11.1 Picker Cradle Mounting Recommendations . . . . . .
6.11.1.1 Mounting Template . . . . . . . . . . . . . .
6.11.2 Wiring Guidelines . . . . . . . . . . . . . . . . . . .
6.11.3 Using The Picker Cradle . . . . . . . . . . . . . . . .
6.11.4 Maintaining The Picker Cradle . . . . . . . . . . . .
6.11.5 Powered Cradle Installation In High Voltage Vehicles
6.11.5.1 Extreme Wet Environments. . . . . . . . . .
6.11.6 Powered Cradle Installation . . . . . . . . . . . . . .
6.11.7 Wiring Vehicle Power To The Cradle . . . . . . . . .
6.11.8 The Port Replicator . . . . . . . . . . . . . . . . . .
6.12 Tether Adaptor Cables . . . . . . . . . . . . . . . . . . . . . .
178
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
193
193
194
194
194
194
195
195
196
197
197
198
Chapter 6: Peripheral Devices & Accessories
External Bar Code Readers
6.1
External Bar Code Readers
6.1.1
PowerScan® Standard, LR and XLR Bar Code Scanners
Note: Refer to “PowerScan Standard Range Scanner Specifications” on page 219 and
“PowerScan® LR and XLR Industrial Scanner Specifications” on page 216 for
detailed specifications.
The 7535 G2 supports Psion Teklogix’ PowerScan® industrial bar code scanner with standard, long range and extra long range options.
To connect this scanner to the 7535 G2, attach the device to the tether port at the upper-right
side of the 7535 G2. Before using the bar code reader, you may need to change some parameters (see “Non-Decoded Scanners” on page C-55). Review your Power Scan Programming
Guide (PSC) for details.
6.1.2
Entering Data With The Bar Code Reader
Note: For helpful scanning tips, refer to “Scanning Techniques” on page 59.
For external non-decoding scanners, when a label is scanned successfully, the 7535 G2 will
beep if configured appropriately and the scan LED will flash. (Most external decoding scanners have their own indicators—some communicate with the unit.) Occasionally, the bar
code labels are poorly printed or damaged and cannot be read properly. In this case, use the
keyboard to enter data from the label.
6.2
RD7950 Integrated UHF RFID Reader
Note: Refer to the RD7950 UHF RFID Reader Quick Reference Guide (P/N 8000056) for
detailed information and specifications.
The RD7950 UHF RFID Reader is an EPC-compliant RFID reader available for Psion Teklogix rugged hand-held computing devices. The RD7950 can be retrofitted to deployed
Psion Teklogix products. Multimedia data capture capabilities are delivered by combining
RFID with existing technologies such as laser bar code scanning or imaging.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
179
Chapter 6: Peripheral Devices & Accessories
Batteries
6.3
Batteries
Note: Battery specifications are detailed beginning on page 221.
7535 G2s operate with lithium-ion batteries—a high capacity 1900 mAh battery pack. For
detailed safety instructions, please see “Lithium-ion Battery Safety Precautions” on
page xxiv. For details on battery charging and installation, see “Powering Up The 7535 G2”
on page 14. For battery calibration and power settings, see “Power Management Properties”
on page 118.
6.4
Battery Charging
Note: Initially, new batteries that have been fully charged may indicate slightly less than
100% charge. No special conditioning is required. The full capacity of the battery
will reach 100% after 5 charge cycles through the charger.
It can take from 1.5 to 4 hours to charge a battery. The 7535 G2’s intelligent charging system
protects the battery from over-charging by terminating the charge process when the battery
is at maximum capacity. See “Approvals And Safety Summary” on page xix, for important
safety and operating instructions for battery chargers and AC/DC adaptors.
Important: To preserve battery integrity, the charger will proceed with a charge only
when the battery temperature falls between 5° C and 39° C (41° F to 102°
F). If the battery is too hot or cold, the battery status LED flashes yellow
and the charge is suspended.
6.4.1
Battery Gas Gauge Calibration
The gas gauge indicator on the hand-held system tray and in the Power Properties dialog has
a typical accuracy of +/- 5% of nominal capacity. In order to keep this accuracy the gas
gauge (which is stored in the battery pack) needs to be calibrated occasionally. Whenever
the battery is fully discharged and then fully charged, the gas gauge becomes recalibrated.
For most users the issue of gas gauge recalibration should be invisible.
If the battery is only partially discharged or partially charged, at least 40 times, the gas gauge
will start to drift out of calibration. When this happens the gas gauge accuracy could decline
to +/- 15% of nominal. A calibration cycle (full discharge / full charge) is needed to fully
recalibrate the gas gauge. Even if the battery is never recalibrated, the gas gauge accuracy
will not drop below +/- 20% of nominal.
180
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Gang Charger
A feature is built into the HU3006 gang charger and the HU3002/HU4002 Combo Charger/Dock which detects a battery that requires calibration and will fully discharge it and
charge it—but only if the remaining capacity is less than 30% of a full charge. On the
HU3006, only one of the six slots can perform a calibration cycle at any one time. This calibration cycle extends the overall charge time by up to 4 hours. A charger that is performing
the initial discharge portion of a calibration cycle will flash its LED yellow at fast rate (a
slow flashing yellow LED indicates the battery is outside of the charge temperature). The
HU3002/HU4002 can also perform a calibration cycle on a battery installed on the handheld, but this function can be disabled in the Power Properties dialog (see “Calibrate” on
page 122).
It is not necessary to perform an initial calibration cycle on a brand new battery, although the
gas gauge may have slightly less than +/- 5% accuracy.
It should be noted that as a battery ages its capacity declines, and this is shown on the gas
gauge as an inability to charge the battery to 100%. The 100% setting corresponds to the
nominal capacity of a new battery (as stated on the battery cover). A battery that cannot be
charged beyond 70% of its nominal capacity is considered to be at its end of life.
6.5
Gang Charger
The HU3006 is designed to charge up to six 7535 G2 lithium-ion batteries at one time. Your
charger is shipped with the appropriate IEC mains power cord. If the supplied power cord is
incorrect for your country, contact Psion Teklogix for assistance.
Important: The gang charger is shipped with a user manual. It is critical that this
manual be reviewed for additional information and updates.
6.5.1
Installation
The gang charger can be wall mounted using the wall mount kit (HU3106) or it can be operated on a flat surface. Install the charger in an area that is free from excessive dirt, dust and
contaminants. The ambient temperature must be in the range 5° C to 39° C (41° F to 102°
F). The charger will not charge batteries outside of this temperature range. For maximum
performance, it is recommended that the charger be operated at room temperature—a temperature range between 18° C to 25° C (64° F to 77° F).
The charger can consume up to 2A @ 120VAC or 1A @ 240VAC. Check to ensure the
mains circuit supplying the charger is adequate for this loading (especially if several chargers are being powered from the same circuit). After unpacking the unit:
•
Visually check the charger for damage.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
181
Chapter 6: Peripheral Devices & Accessories
Operator Controls
• Install the IEC power cord and apply power.
A green indicator in the lower-right indicates power is present. All charge indicators flash
momentarily at powerup to indicate that the charger is ready for operation.
If you choose to wall mount the charger, follow the instructions packaged with the mounting
bracket kit. Be sure to locate the charger in an area where there is no risk of injury to persons
walking in the vicinity.
6.5.2
Operator Controls
The gang charger does not have operator controls or a power switch.
6.5.3
Charge Indicators
Each battery charge slot is equipped with a tri-coloured LED to indicate the charge status of
the battery. When 7535 G2 batteries are inserted in the charger, the colour and behaviour of
the LEDs associated with the charge wells in use indicate the status of the charge.
Table 6.1 Gang Charger Indicators
LED Behaviour
182
Icon
Charge Status
Off
No battery detected in the slot.
Solid green
Battery is fully charged.
Flashing green
Battery is charged to 75% capacity.
Solid yellow
Charge in progress.
Flashing yellow
Battery temperature out of charge range between 5° C
to 39° C (41° F to 102° F). This icon indicates that the
charger is waiting to charge. Charging is attempted
every five minutes until the battery is within the appropriate temperature range.
Solid red
Battery rejected (at insertion) or unable to complete
charge on battery
Flashing red
Charging circuit problem. Refer to “Troubleshooting”
on page 183.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Charging Batteries
6.5.4
Charging Batteries
•
Install the battery with the battery contacts facing the charger. Slide the battery between
the guide rails until it lightly latches in place.
The LED directly below the slot in which a battery is inserted lights up immediately. A solid
yellow LED indicates that the battery is being charged. If the battery temperature is outside
5° C to 39° C (41° F to 102° F), the LED flashes yellow until the temperature is acceptable.
A fully discharged battery will normally take between 1.5 and 4 hours to charge. When the
battery charge reaches 75%, the indicator flashes green. At full capacity, it turns solid green.
When the battery is fully charged, the charger stops applying power; the battery cannot be
overcharged if left in the charger slot. The 75% charge indicator is handy if you need a quick
recharge—it often occurs after less than an hour.
Storing batteries in the gang charger for extended periods (more than a week or two) is not
recommended. Lithium-ion batteries lose capacity if they are maintained at full charge for
long periods of time. See the battery storage recommendations in “Storing Batteries” on
page 42.
6.5.5
Troubleshooting
6.5.5.1 Excessive Charge Duration
The charger is equipped with a recalibration function—a function that fully discharges and
then fully recharges the battery. This process is necessary to recalibrate the battery capacity
gauge internal to the battery. The charger attempts recalibration when:
•
•
the battery capacity is at less than 30%, and
the battery has undergone more than 40 partial charge cycles since the last full
discharge.
A complete battery discharge takes between 1.5 and 4 hours to complete. When in discharge
mode, the LED indicator flashes yellow. The recalibration function extends the charge time
by up to 2 hours.
6.5.5.2 Improper Battery Storage
Storing batteries in the gang charger for extended periods (more than a week or two) is not
recommended. Lithium-ion batteries lose capacity if they are maintained at full charge for
long periods of time. See the battery storage recommendations in “Storing Batteries” on
page 42.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
183
Chapter 6: Peripheral Devices & Accessories
Combo Charger
6.5.5.3 Indicator Flashing Red
If the indicator flashes red:
• Remove all batteries and disconnect the mains power cable.
• Wait at least 20 seconds, and then plug the cable in again.
If any of the charge slot LEDs continue to flash red, the charger is defective and requires service. If all indicators are flashing red, there is a power supply problem and the charger
requires service.
6.5.5.4 Power LED Does Not Light Up
•
•
•
•
Remove all batteries, and unplug the charger.
Connect another device to the mains outlet to ensure there is power.
Remove the IEC mains power cable from the charger, and check it for damage.
Reconnect the mains cable in the charger and mains outlet.
6.5.5.5 Indicator Does Not Light When Battery Installed
•
•
•
•
•
6.6
Remove the battery, and clean the contacts on the battery and the charge slot.
Reinstall the battery, and check that it is fully seated in the slot.
Inspect the charge slot contacts for damage (are they bent, flattened, twisted or broken).
Try inserting a battery that you know to be working in the charger slot.
Reconnect the mains power cable, and check that the slot indicator flashes at powerup.
Combo Charger
The 7535 G2 combo charger is a desktop charger designed to charge the 7535 G2 internal
battery along with a spare battery pack. The combo charger provides sufficient power to
operate and fast charge the 7535 G2 internal battery, while recharging the spare battery pack.
Note: The combo charger is shipped with a user manual. It is critical that this manual be
reviewed for additional information and updates.
6.6.1
Installation
Keep the combo charger away from excessive dirt, dust and contaminants. The combo
charger will not charge batteries outside an ambient temperature range of 5° C to 39° C (41°
F to 102° F). It is recommended that this charger be operated at room temperature between
18° C and 25° C (64° F to 77° F) for maximum performance.
After unpacking the unit:
184
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Operator Controls
• Visually inspect the charger for possible damage.
• Install the IEC power cord and apply power.
A green LED in the lower-right corner of the front panel lights to indicate that power is present. The charge LED flashes momentarily at powerup. The charger is now ready for
operation.
6.6.2
Operator Controls
The combo charger has no operator controls or power switch.
6.6.3
Using the Combo Charger With The 7535 G2
•
Gently slide the 7535 G2 into the cradle portion of the combo charger until lightly
latched. An icon is displayed indicating that the 7535 G2 is properly installed in the
combo charger
.
The battery charge LED on the 7535 G2 lights up indicating that the unit has external power
and battery charging may begin. It is safe to leave the 7535 G2 in the combo charger cradle
while it is not in use—the battery will not be overcharged.
6.6.4
Charging The Spare Battery
•
Install the battery with the latch facing towards the rear of the charger—slide it between
the guide rails until it lightly latches in place.
The LED for the slot lights up immediately. A solid yellow LED indicates the battery is
being charged. A flashing yellow LED indicates that the battery temperature is outside the
acceptable charge range between 5° C and 39° C (41° F to 102° F).
A fully discharged battery normally takes between 1.5 and 4 hours to charge. When the
battery capacity reaches 75%, the LED flashes green. When the battery is at full capacity,
the indicator turns solid green.
The combo charger stops applying power to the battery when it is fully charged—there is no
risk of overcharge if the battery remains in the charge slot (however, see Important note,
below). The 75% charge indicator is handy if you need a quick recharge—a quick charge
often takes less than one hour.
Important: The spare battery slot is not intended as a battery storage pocket. Storing
batteries in the combo charger for extended periods (more than a week or
two) is not recommended. Lithium-ion batteries permanently lose capacity
if they are maintained at full charge for long periods of time. See the battery
storage recommendations in “Storing Batteries” on page 42.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
185
Chapter 6: Peripheral Devices & Accessories
Charge Indicators
6.6.5
Charge Indicators
The spare battery charge slot has an associated tri-colour LED indicator on the lower-right
area of the front panel. The charge indicators are the same as those for the Gang Charger.
For a description of the charger indicators, please refer to Table 6.1 on page 182.
The combo charger supplies DC power to enable the 7535 G2 internal fast charger. Charge
status is displayed on the 7535 G2 charge LED (the lower-right LED). Refer to “Charge
LED” on page 53 for details. All Charge LEDs (whether on the HU3006, HU3002,
HU4002, or on the hand-held) function in exactly the same way.
Normally, it takes from 1.5 to 4.0 hours to fully charge the 7535 G2 internal battery.
Note: Battery charging continues whether the 7535 G2 is switched on or off.
6.6.6
Troubleshooting
The gang charger troubleshooting section also applies to the combo charger. Refer to “Troubleshooting” on page 183, for helpful tips.
6.7
Combo Dock
The combo dock is identical to the combo charger with one exception: the combo dock is
equipped with a 10/100 BaseT Ethernet interface. The charging information in “Combo
Charger” on page 184 also applies to the combo dock.
6.7.1
Installation
Refer to the “Installation” guidelines for the combo charger beginning on page 184.
•
Attach a CAT5 RJ45 network patch cable (shipped with the combo dock) between your
network and the RJ45 jack on the rear of the dock.
A green LED is illuminated next to the RJ45 connector when a valid network link is
established.
A user application needs to be loaded onto each 7535 G2 that utilizes the combo dock for
communication. With the network connected and this application loaded, the combo dock is
ready for use.
6.7.2
Using The Combo Dock
•
186
Gently slide the 7535 G2 into the cradle portion of the combo dock until lightly latched.
The 7535 G2 detects combo dock and displays the appropriate icon
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Network Access
The battery charge LED (lower-right LED) on the 7535 G2 lights up to show it has external
power and may start charging the battery.
Interaction with the 7535 G2 while in the combo dock is a function of the user application
software used to communicate with the host network.
6.7.3
Network Access
The combo dock includes a dedicated USB to Ethernet converter. This USB converter
appears as a USB slave to the 7535 G2 USB host controller. The 7535 G2 automatically
detects insertion into a combo dock and loads the appropriate drivers to communicate with
the USB/Ethernet converter.
See “Network Addressing” on page 189 for details about network addressing issues with the
combo dock.
6.7.4
Troubleshooting
Troubleshooting issues for the combo dock are identical to those of the quad dock. Refer to
“Troubleshooting” on page 189 for helpful tips.
6.8
Quad Dock
Note: The quad dock is shipped with a user manual. It is critical that this manual be
reviewed for additional information and updates.
The Quad Dock permits each of four docked 7535 G2 hand-helds to communicate with a
10/100 BaseT Ethernet network at greater than 2Mbps. It also provides sufficient power to
operate and fast charge the batteries in the 7535 G2s.
6.8.1
Installation
The quad dock should be located away from excessive dirt, dust and contaminants. The
ambient temperature must fall between 5° C to 39 °C (41° F to 102° F). The 7535 G2 internal charger will not charge batteries outside of this temperature range. For maximum
performance, it is recommended that the quad dock be operated at room temperature from
18° C to 25° C (64° F to 77° F).
The quad dock can consume up to 3A @ 120VAC or 1.5A @ 240VAC. Ensure that the
mains circuit supplying the unit is adequate, especially if several docks are being powered
from the same circuit.
After unpacking the unit:
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
187
Chapter 6: Peripheral Devices & Accessories
Indicators And Controls
• Visually inspect the unit for any damage.
• Install the IEC power cord and apply power.
A green indicator in the lower-right corner of the front panel lights up to indicate that power
is present.
•
Attach a CAT5 RJ45 network patch cable (supplied) between your network and the
RJ45 jack on the rear of the dock.
A green LED is illuminated next to the RJ45 connector when a valid network link is
established.
A user application must be loaded onto each 7535 G2 that utilizes the quad dock for communication. When the network is connected and this application is loaded, the quad dock is
ready for use.
6.8.2
Indicators And Controls
The quad dock has no user controls. It is equipped with a power indicator LED and RJ45
link and traffic indicator LEDs. When a valid network link is established, a green LED is illuminated next to the RJ45 connector.
6.8.3
Using The Quad Dock
• Gently slide the 7535 G2 into the cradle portion of the quad dock until lightly latched.
The 7535 G2 detects that it is in a quad dock and displays the appropriate icon in the taskbar
The battery charge LED on the 7535 G2 lights up to show it has external power and may
start charging the battery.
Interaction with the 7535 G2 while in the quad dock is a function of the user application
software used to communicate with the host network.
6.8.4
Network Access
The quad dock includes a four port 10/100 Ethernet hub. Each of the four downstream ports
are connected to dedicated USB-to-Ethernet converters. These USB converters appear as
USB slaves to the 7535 G2 USB host controller. The 7535 G2 automatically detects insertion into a quad dock and loads the appropriate drivers to communicate with the
USB/Ethernet converters.
188
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Battery Charging
6.8.4.1 Network Addressing
Although the USB converters have fixed Ethernet MAC addresses, there is generally no correlation between these addresses and a specific 7535 G2 hand-held. The host application
uses standard TCP/IP protocol to name, locate and communicate with a specific 7535 G2 on
the network.
If a link is established between a hand-held and a host, the application on the host and on the
7535 G2 must have a recovery mechanism in the event that the hand-held is removed from
the dock and the link is interrupted.
6.8.5
Battery Charging
The quad dock supplies DC power to enable the 7535 G2 internal fast charger. Charge status
is displayed on the hand-held charge LED (see “Charge LED” on page 53). Battery charging
continues whether the unit is switched on or off.
Normally, it takes between 1.5 and 4 hours to fully charge the 7535 G2 internal battery.
6.8.6
Troubleshooting
The indicators, applications and drivers required to use and monitor the docking station are
installed on the 7535 G2—no indicators or applications are present on the docking station
itself.
6.8.6.1 Network Link Unsuccessful
If a network link fails, the 7535 G2 application alerts the operator that the link was
unsuccessful.
6.8.6.2 7535 G2 LED Does Not Light When Docked
•
•
•
•
•
•
•
Check that the quad dock has power—is the Power LED on the quad dock illuminated?
Try inserting the 7535 G2 in another slot in the quad dock.
Check for dirt or contamination on the docking contacts at the bottom of the 7535 G2.
Wipe the contacts with a damp cloth if necessary.
Check the pogo pins inside the dock cradle for dirt. Gently wipe with a damp cloth if
they appear to be dirty or discoloured.
Check that the pogo pins are not bent or damaged.
Remove and reinsert the 7535 G2 in the cradle—check that the latch is holding the unit
in place (the pogo pins must be compressed for proper contact).
Make certain that the battery installed in the 7535 G2 is not defective.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
189
Chapter 6: Peripheral Devices & Accessories
Portable Docking Module (PDM)
6.9
Portable Docking Module (PDM)
Warning: The mains power cord for the AC/DC adaptor shall comply with national
safety regulations of the country where the equipment is to be sold.
The Portable Docking Module (PDM) clips onto the base of the 7535 G2 and is most often
used to charge the 7535 G2 battery when a desktop charger is not convenient. The PDM also
offers additional communication ports, making it useful for upgrading software in the 7535
G2 from a USB-equipped laptop computer.
Figure 6.2 on page 191 illustrates the connectors on the PDM.
•
•
Align the pins on the PDM with the connectors on the base of the 7535 G2.
Gently snap the PDM into place on the base of the unit. Figure 6.1 on page 191 provides
a visual representation of how to secure the PDM.
Note: The latching mechanism on the PDM is designed for quick installation and release.
It is not meant for heavy duty use. Psion Teklogix recommends using a powered cradle or combo charger in harsh environments.
190
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Portable Docking Module (PDM)
Figure 6.1 Attaching The PDM To The Base Of The 7535 G2
Align the guide pins on the PDM with the
slots on the base of the 7535 G2, and
gently snap the PDM onto the hand-held.
Guide Pins
Figure 6.2 PDM Ports And Connectors
Type B USB Device
RS-232 Serial Port
Type A USB Host
15 VDC Power Jack
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
191
Chapter 6: Peripheral Devices & Accessories
Bluetooth Peripherals
The interfaces available on the PDM are as follows:
•
•
•
AC/DC adaptor jack (15VDC @ 2.5A).
Type A USB host port (for connection to USB devices such as a mouse, keyboard,
printer, etc.).
Type B USB device port (for connection to a USB host such as a PC).
Note: For information about data transfer with the Windows XP operating system and
ActiveSync, and with the Vista operating system, refer to “Data Transfer Between
The 7535 G2 And A PC” on page 34.
•
RS-232D DE9 serial port (for connection to a PC COM port or a serial device such as a
printer).
The standard Psion Teklogix PDM kit (P/N HU4001) includes the necessary AC/DC adaptor, line cord, USB cables and RS-232D 9-pin cable.
The PDM contains reverse polarity and over voltage protection. If the AC/DC adaptor jack
is wired backwards or exceeds 20VDC, the PDM shuts down to protect the 7535 G2, the
PDM and the power supply from damage. Psion Teklogix does not recommend substituting
the AC/DC adaptor provided with your PDM.
The power supplied by the PDM is sufficient to operate the 7535 G2 and fast charge its internal battery at the same time. The 7535 G2 can run from a PDM without a battery
installed.
Important: Please see “Warnings To Users” on page xxiii for AC/DC adaptor safety
instructions.
6.10
Bluetooth Peripherals
It is possible to communicate with a variety of Bluetooth peripherals, including GSM/GPRS
handsets, scanners, printers, and so on. The range of the Bluetooth radio in the 7535 G2 is
limited to approximately 10 meters (32 ft.). The Bluetooth antenna is located behind the
scanner ‘bulge’ on the back of the hand-held.
Psion Teklogix provides built-in support for:
•
•
•
•
192
Bluetooth equipped cell phone.
Serial Port Profile (SPP).
Dial-up Networking Profile (DUN).
Object Push Profile (OPP).
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
The 7535 G2 Picker Cradle
Keep in mind that Bluetooth and IEEE 802.11g radios both operate in the 2.4GHz band. Although the 7535 G2 includes features to minimize interference, performance of the system
will not be optimal if you use both radios simultaneously. Typically, when both radios
operate in the 7535 G2 at the same time, they cannot transmit simultaneously—this has a
negative impact on overall system throughput. To minimize the impact on the backbone
802.11 network, Psion Teklogix recommends using Bluetooth peripherals that have low
transaction rates (such as printers and scanners).
Bluetooth peripherals are configured by choosing the Bluetooth icon in the Control Panel.
Refer to “Bluetooth Setup” on page 126 for information about setting up your Bluetooth
devices for communication. In addition, review the manual shipped with your Bluetooth
device to determine the method used to associate with the 7535 G2 host.
6.11
The 7535 G2 Picker Cradle
The 7535 G2 picker cradle is a highly ruggedized, single station dock. Although it provides
quick insertion and removal, the cradle holds the 7535 G2 securely even when operated in
high vibration environments (such as vehicles not equipped with suspensions). The7535 G2
base picker cradle can be outfitted with two options: a power module and a port replicator.
Psion Teklogix also supplies a range of standard mounts for the hand-held picker cradles,
and the 7535 G2 picker cradle is compatible with all of them.
6.11.1 Picker Cradle Mounting Recommendations
Warning: Before mounting a picker cradle in a vehicle, there are a number of operator
safety issues that require careful attention. An improperly mounted cradle
may result in one or more of the following: operator injury, operator visibility obstruction, operator distraction and/or poor ease of egress for the
operator. Psion Teklogix strongly recommends that you seek professional
mounting advice from the vehicle manufacturer.
Cable routing within a vehicle cab also requires careful consideration, especially for separately tethered scanners and other devices with loose cables. If
you are unable to obtain suitable advice, contact Psion Teklogix for assistance. Note also that for better protection, the equipment should be mounted
inside the vehicle roll cage.
Pedestal mounts are recommended for all fixed mount locations because they offer optimal
operator access. In addition, for safety reasons, only pedestal mounts with fully locking
joints should be used in vehicles. Always adjust the pedestal for the optimum viewing angle,
and securely tighten the hex and wing screws.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
193
Chapter 6: Peripheral Devices & Accessories
Wiring Guidelines
The most effective way to mount the picker cradle is to use the four #8-32 threaded inserts
on the rear of the unit. Bolts must not extend more than 10mm (3/8") into the cradle.
To accommodate the service loop of the connector cable, leave a 4" clearance at the bottom
of the cradle. Leave a 7" (minimum) clearance at the top of the cradle to allow easy removal
of the hand-held. Also remember to leave at least a 3" clearance at the sides of the cradle to
allow activation of the release knobs. Refer to the detailed assembly instructions that are
packaged with the cradle when selecting a mounting location.
6.11.1.1 Mounting Template
The picker cradle is shipped with detailed mounting instructions including a drill template.
6.11.2 Wiring Guidelines
Before installing the cables between the cradle and other devices, consider the following:
•
•
•
•
•
•
Ensure that drilling holes will not damage the vehicle or its wiring.
Protect cable runs from pinching, overheating and physical damage.
Use grommets to protect cables that pass through metal.
Use plastic straps and tie-downs to secure cables and connectors in their desired location, away from areas where they may get snagged or pulled.
Keep cables away from heat sources, grease, battery acid and other potential hazards.
Keep cables away from control pedals and other moving parts that may damage the
cables or interfere with the operation of the vehicle.
6.11.3 Using The Picker Cradle
If your 7535 G2 is equipped with a shoulder strap or cover, these accessories need to be
removed before installing the unit in a picker cradle. There is no need to remove handstraps,
pistol grips or tethered devices from the unit.
•
•
Slide the 7535 G2 into the cradle, and press firmly downward until it locks into place.
On a vehicle, it’s a good idea to pull up on the 7535 G2 to be certain that it is secure.
To remove the 7535 G2, press firmly on one of the knobs on either side of the cradle
until it releases. You do not need to press both knobs.
6.11.4 Maintaining The Picker Cradle
Two latches in the cradle hold the 7535 G2 firmly in place. Although these latches are designed for at least 80,000 insertion and removal cycles, they will wear over time and will no
194
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Powered Cradle Installation In High Voltage Vehicles
longer lock the 7535 G2 securely in the cradle. For replacement parts and instructions
contact Psion Teklogix. Partial disassembly is required.
6.11.5 Powered Cradle Installation In High Voltage Vehicles
Warning: Voltages exceeding 60VDC are considered hazardous. For powered cradle
installations on vehicles with batteries above this voltage, ensure the powered
cradle power connector is mounted in a dry location on the vehicle, or that
the connector is insulated with an appropriate waterproof material after
installation. The connector must also be installed out of the vehicle operator’s reach. Exposing an accessible power connector to water or other liquids
could create a hazardous situation resulting in serious injury or death.
Installation of powered cradles in vehicles that operate above 60VDC require special
consideration.
Due to the hazardous voltages present on these vehicles, it is necessary to ensure that the
powered cradle power supply cable connector is not accessible to the vehicle operator, and
does not get exposed to water or other liquids. This can be accomplished in one of the following ways:
•
Ensure the power connector is installed in a dry location on the vehicle, away from the
vehicle operator’s reach (perhaps under a vehicle dash or in a sealed housing).
• Cover the power connector with a waterproof heat shrink material (see “Extreme Wet
Environments” below for additional details).
• Wrap the connector securely with a waterproof electrical tape in an area out of the
vehicle operators reach.
All other installation requirements outlined in this document should also be followed for
High Voltage vehicles to insure safe installation and operation of the powered cradle.
6.11.5.1 Extreme Wet Environments
For extreme wet environments, or environments where it is difficult to restrict vehicle operator access to the power connector, Psion Teklogix offers a waterproof heat shrink kit (P/N
1030022). The kit contains 3 pieces of waterproof, high shrink ratio heat shrink tubing
which can be used to encapsulate the entire connector assembly. If using this kit, please
ensure that you order sufficient material to cover installation and service, remembering that
heat shrink is one-time use, and must be replaced if it is removed from the connector for any
reason.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
195
Chapter 6: Peripheral Devices & Accessories
Powered Cradle Installation
6.11.6 Powered Cradle Installation
The powered cradle option is designed to allow the 7535 G2 to be powered by a vehicle battery. The battery installed in the 7535 G2 is also recharged by the vehicle battery. This
option accepts DC power sources over the range 12V to 80V.
The 7535 G2 picker cradle can be ordered with the powered cradle option installed, or it can
be retrofitted later at an authorized Psion Teklogix service depot.
The 7535 G2 charging LED (see “Charge LED” on page 53) indicates that external power is
available, and it also indicates the charging status of the internal battery.
Warning: Applying a voltage above 90VDC or reversing polarity may result in permanent damage to the cradle power option and will void the product warranty.
TO AVOID ELECTRIC SHOCK when the powered cradle option is
installed, always ensure that the rear panel ground lug on the picker cradle is
connected to the vehicle chassis. Failure to do this could result in serious
injury or death.
The metal chassis of the picker cradle must be connected directly to the chassis of the vehicle. A safety ground lug (clearly labelled on the rear of the cradle chassis) is provided for
this purpose. The grounding strap must connect from the ground stud on the picker cradle to
a solid, reliable contact point on the main portion of the vehicle chassis. It must not be connected to battery negative or a terminal block. This grounding strap ensures that if there is a
fault in the vehicle wiring or in the picker cradle power module, the picker cradle cannot be
at a hazardous voltage with respect to the vehicle chassis.
Connection between the picker cradle ground lug and the vehicle chassis should be done
with a 16 gauge ground strap (ground wire). Connect the ground strap to the picker cradle
utilizing the ground lug hardware supplied with the picker cradle and a #10 heavy duty wire
crimp ring terminal. Torque the ground lug hardware to 23.0 +/- 2.0 in-lbs. Connect the
other end of the ground strap to a solid, reliable point on the main portion of the vehicle
chassis, ensuring a solid electrical connection.
As with other vehicle cables, the routing of the ground strap should be carefully considered
to ensure it does not pose a hazard to the operator or the safe operation of the vehicle. If necessary, secure the ground strap with cable ties or some other mechanical means to prevent
loops or loose lengths of wire that could catch on stationary items when the vehicle is
in motion.
196
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 6: Peripheral Devices & Accessories
Wiring Vehicle Power To The Cradle
6.11.7 Wiring Vehicle Power To The Cradle
A 1.8 meter (6 foot) extension power cable (P/N 13985-302 or 13985-301) is supplied with
your power cradle. This cable should be wired to a filtered, fused (maximum 10A) accessory supply on the vehicle. The power cradle draws no more than 8A (less if the accessory
supply is greater than 12V). Any additional wiring, connectors or disconnects used should
be rated for at least 10A.
Note: When connecting P/N 13985-301 (Screen Blanking version), ensure that the screen
blanking wires (clearly labelled) and the power wires (red/black leads) are reliably
secured away from each other, or are separated with reliably secured certified insulation. A minimum 2.8mm distance, or 0.4mm distance through insulation, is
required for the separation.
The red lead of the power cable attaches to the positive vehicle supply. The black lead connects to the negative supply—this should be connected to a proper terminal block and not to
the vehicle body. The power cradle is fully isolated and can be used with both negative and
positive chassis vehicles.
You may have the option of connecting power before or after the ‘key’ switch. It is preferable to wire the power cradle after the key switch—that is, it cannot be turned on without the
key on. However, if the operator switches the key off repeatedly for long periods during a
shift, it may make more sense to wire the cradle before the switch.
Keep in mind that the 7535 G2 will continue to operate with or without vehicle power as
long as its battery has sufficient charge. If an unfused power source must be used, a fuse assembly (P/N 19440-300) must be added to the extension power cable (the fuse and
instructions are supplied with the cable). Use only a 10A slow blow UL approved fuse in the
fuse assembly.
6.11.8 The Port Replicator
The port replicator is an optional accessory that allows tethered devices (e.g., scanners) as
well as mounted peripherals (e.g., bar code printers or weigh scales) to be attached to the
picker cradle. The replicator can be used with or without the cradle power option. The functionality of the 7535 G2 tether port is duplicated on the port replicator. In addition to the
tether port, the replicator is equipped with a standard 9 pin RS-232D serial interface. This
interface is typically used for fixed peripherals such as printers. Your serial device likely includes a suitable cable connector for this port.
Note: The 7535 G2 picker cradle can be ordered with the port replicator option installed,
or it can be retrofitted later by an authorized Psion Teklogix service depot.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
197
Chapter 6: Peripheral Devices & Accessories
Tether Adaptor Cables
6.12
Tether Adaptor Cables
The following generic interface tether cables are available in addition to the dedicated cables
provided for external scanners as described in “External Bar Code Readers” on page 179:
• CA1010 JB5 to DE9 RS-232 Serial Cable: Straight through wiring.
• CA1015 JB5 to DE9 RS-232 Serial Cable: Null modem (signal lines are crossed-over).
• CA1020 JB5 to Type B USB: Connects to USB devices with Type B receptacles.
For the pinout diagrams for 7535 G2 cables P/N CA1020 and P/N CA1010, please see Appendix A: “Port Pinouts”.
Special intermediate cabling assemblies are available to allow older devices or unique peripherals to be connected to the JB5 tether port. These cabling assemblies permit scanner
cables to be re-terminated in an intermediate in-line connector (called LTW), which then interfaces to one of a number of standard adaptor cables with JB5 terminations.
These kits include assembly instructions and the mating connector.
• 1002162 Cable Adaptor LTW - JB5 Scan Decoded.
• 1002163 Cable Adaptor LTW - JB5 Scan Undecoded.
• 1002164 Cable Adaptor LTW - JB5 Scan RS-232.
• 1002165 Cable Adaptor LTW - JB5 Scan RFID.
• 1002166 Cable Adaptor LTW - JB5 Scan USB.
Contact Psion Teklogix support services for assistance in the creation of these cable assemblies if you wish to take advantage of this capability.
198
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
7
SPECIFICATIONS
7.1 7535 G2 Hand-Held Computer Specifications .
7.1.1 Hardware . . . . . . . . . . . . . . .
7.1.2 Software . . . . . . . . . . . . . . .
7.1.3 Approvals. . . . . . . . . . . . . . .
7.2 Radio Specifications . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.201
.201
.203
.204
.204
7.3 Internal Scanner Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205
7.4 RFID Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
7.5 External Scanners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206
7.6 Internal Scanner Specifications. . . . . . . . . . . . . . . . . . . . . . . .
7.6.1 EV15 Imager Specifications . . . . . . . . . . . . . . . . . . . .
7.6.1.1 EV15 Imager Decode Zone . . . . . . . . . . . . . . . .
7.6.2 SE1200 High Performance And Long Range Specifications . . .
7.6.3 SE1200 Advanced Long Range And SE2223PDF Specifications.
7.6.3.1 SE1200 And SE2223 Decode Zones . . . . . . . . . . .
7.6.4 SE1224HP Specifications . . . . . . . . . . . . . . . . . . . . .
7.6.4.1 SE1224HP Decode Zones. . . . . . . . . . . . . . . . .
7.6.5 SE1524ER – Extended Range Scanner . . . . . . . . . . . . . .
7.6.5.1 SE1524ER Decode Zones. . . . . . . . . . . . . . . . .
7.6.6 SX5400* Imager Specifications . . . . . . . . . . . . . . . . . .
7.6.6.1 SX5400 Imager Performance . . . . . . . . . . . . . . .
7.7 External Scanner Specifications . . . . . . . . . . . . . . . . . . . . . . .
7.7.1 PowerScan® LR and XLR Industrial Scanner Specifications . . .
7.7.2 PowerScan Standard Range Scanner Specifications . . . . . . . .
7.8 RD7950 Integrated UHF RFID Reader . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.206
.206
.207
.207
.209
.210
. 211
.212
.212
.213
.215
.216
.216
.216
.219
.221
7.9 HU3000 - 1900 mAh Lithium-ion Battery Pack . . . . . . . . . . . . . . . . . . . .221
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
199
200
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
7535 G2 Hand-Held Computer Specifications
7.1
7535 G2 Hand-Held Computer Specifications
Note: Performance specifications are nominal and subject to change without notice.
7.1.1
Hardware
Physical Dimensions
•
•
102mm width x 62.5mm depth x 260mm (4.0 in x 2.5 in x 10.2 in) length.
Keypad area: 75.5mm width x 36mm (3 in x 1.4 in) depth.
Weight
•
•
With battery 647g (22.83 oz.)
With pistol grip add 86.4g (3.05 oz.)
User Interface
Color Touchscreen Display:
8.9 cm (3.5 in.) diagonal.
1/4 VGA 240x320 resolution.
Transflective, portrait mode TFT.
Automatic Backlight and Contrast control.
Sunlight readable (for outdoor use).
High-reliability white LED backlight (1.5 ft-L).
256K displayable colours.
Passive stylus or finger operation.
Integral stylus holder.
Keyboards:
Numeric.
Alphanumeric.
Numeric with Phone (option only in countries with
GPRS availability).
Ergonomically enhanced for ambidextrous, one-hand
operation.
Backlit, high durability hard-capped keys.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
201
Chapter 7: Specifications
Hardware
Indicators And Controls:
Multi-colour LEDs indicate battery status, application, and radio transmit/receive, user applications.
Internal 95dB beeper with volume control.
Power
•
•
•
•
•
•
•
•
•
•
7.4V @ 1900mAh Li-ion rechargeable battery.
Intelligent fast charge.
8-hour battery operation (5 scans, transmit & receive/min.).
Built-in gas gauge & performance monitor.
Quick swap battery packs.
Built-in fast charger (2 hour typical recharge).
Self-guiding & latching battery pack design.
System backup (up to 20 minutes) during battery swap.
Adjustable battery allocation between system backup and runtime.
1 week real-time clock backup.
Communication
Ports:
One tether port (optional) with:
- one RS-232 serial port (decoded scanner, printer)
- one undecoded scanner port
- one USB host port
- Power out, 5 VDC @ 1.0 A nominal
One docking station port with:
- one RS-232 serial port including diagnostics
- one USB device port
- one USB host port
- Power in, 15 VDC nominal, 10 VDC to 19 VDC,
3.5 A maximum
- Power out, 5 VDC +/- 5% @ 1.0 A nominal,
1.5 A peak
202
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
Software
Environmental
Guaranteed Operating:
-10°C to +50°C (14°F to 122°F)
Temperature Range:
Long exposure to temperatures below -40°C
(-40°F) may damage the screen and main battery.
Prolonged exposure to temperatures above +60°C
(+140°F) will damage the main battery and temperatures above +70°C (+158°F) may damage the unit.
Storage Temperature:
-25°C to +60°C (-13°F to 140°F)
Rain And Dust Resistance:
IEC 529, classification IP65.
Humidity:
5% - 95% RH non-condensing
Drop Durability:
Multiple 1.8m (6 ft.) drops or 26 drops from 1.5m
(5 ft.) to concrete while powered on and configured
with accessories such as WiFi radio, scanner/imager,
and pistol grip.
Cradle shock: IEC 60068-2-27: Test Ea, 300 m/s2,
11ms, half-sine, 3 shocks in each of 6 directions.
Cradle vibration: IEC 60068-2-64: Test Fh, Random,
3 axis, 100 min/axis; 5.0 m2/s3 ASD,
10 - 200 Hz; 1.0 m2/s3 ASD, 200 - 500 Hz.
7.1.2
Software
Processor And Memory
•
•
•
XScale PXA270 @ 520 MHz Processor.
RAM: 128MB SDRAM standard.
Flash ROM: 64MB FLASH standard.
Operating System
•
Microsoft Windows Embedded CE 5.0
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
203
Chapter 7: Specifications
Approvals
7.1.3
Approvals
Safety:
UL 1950-1, CSA C22.2 No950, LVD EN60950
EMC:
FCC Part 15 Class B, EMC Directive Class B
Laser:
IEC 60825-1 Ed. 2.0 Class 2
CDRH 21 CFR 1040 Class II
RoHS compliant:
7.2
EU Directive 2002/95/EC
Radio Specifications
Model RA2043 (Motorola): 802.11a/b/g Direct Sequence Spread Spectrum (DSSS)
Form factor
Compact Flash Type I/II extended
Antenna port
Integrated antenna (two-antenna diversity)
Transmit Power
Maximum 18 dBm, (including antenna gain, varies
with data rate, channels, and environment)
Receive Power
280mA (maximum continuous receive power);
Standby/idle: 17mA (while associated to the
network)
Frequency Range
4.9 - 5.85 GHz; 2.4 to 2.5 GHz
Channels
FCC:
802.11a - 24; 802.11b/g - 11
ETSI:
802.11a - 19; 802.11b/g - 13
Japan:
802.11a - 35; 802.11b/g - 14
Range
3000 ft. (typical max., outdoor); 300 ft. (typical max.,
office environment)
Data Rates
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54Mbps
Model RA2041 (Summit): 802.11b/g Direct Sequence Spread Spectrum (DSSS)
Form factor
Compact Flash Type I extended
Antenna port
Two Hirose U.FL connectors for antenna diversity
Transmit Power
802.11g: 32mW maximum (+15 dBm)
802.11b: 80mW maximum (+19 dBm)
Frequency Range
204
2.400 - 2.4897 GHz
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
Internal Scanner Port
Channels
FCC:
11
ETSI:
13
TELEC: 13
RX Sensitivity
-96dBm @ 1Mbps, -90dBm @ 11Mbps,
-94dBm @ 6Mbps, -75dBm @ 54Mbps
Data Rates
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11b: 1, 2, 5.5, 11 Mbps
Bluetooth Radio
Embedded (920 kbps serial interface)
Bluetooth Version
Ver 2.0 compliant (features Adaptive Frequency
Hopping for better co-existence with 802.11 radio
and Enhanced Data Rate (EDR) for up to 3Mbps data
rate).
Chip Antenna Gain
1dBi peak
Transmit Power
-3dBm (0.5mW) minimum, +4dBm (2.5mW) max
Frequency Range
2.400–2.4835 GHz
RX Sensitivity (BER<0.1%)
-80dBm max
Data Rate
V1.2 = 732.2 kbps and 57.6 kbps asymmetric,
433.9kbps symmetric
V2.0 = 2 & 3Mbps
7.3
Internal Scanner Port
Compatibility
1D Laser Scanners:
SE1200HP non-decoded, standard range
SE1200LR non-decoded, long range
SE1200ALR non-decoded, advanced long range
SE1224HP decoded, fuzzy logic, enhanced standard
range
SE1524ER decoded, fuzzy logic, auto-ranging bar
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
205
Chapter 7: Specifications
RFID Applications
code scanner
7.4
1D Imagers:
EV15, linear, short range
2D Laser Scanner:
SE2223 2D decoded PDF417 raster
2D Imagers:
SX5400 Imager
RFID Applications
•
RD7950 Integrated UHF RFID Reader
Psion Teklogix RFID File System
Multi-protocol support
7.5
External Scanners
7.6
Supported Types
Decoded and Non-Decoded 5V only.
Interface
Via tether port.
Internal Scanner Specifications
This section lists specifications for the following internal scanners:
•
•
•
•
•
•
7.6.1
EV15 (page 206).
SE1200 High Performance and Long Range (page 207).
SE1200 Advanced Long Range and SE2223PDF (page 209).
SE1224 High Performance (page 211).
SE1524 Extended Range (page 212).
SX5400 Imager (page 215).
EV15 Imager Specifications
Light Source
Scan Angle
Minimum Print
Contrast
Min x. Dimension
Reading Distance
206
617nm Highly Visible LED
40º
Minimum 25%
0.1 mm (4 mils)
Up to 90cm (35 in)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
SE1200 High Performance And Long Range Specifications
Symbologies
Ambient Light
Shock
Vibration
UPC (E&A), EAN, RSS, Code 39, Code 128, UCC/EAN 128,
ISBN, ISBT, Interleaved, Matrix, Industrial and Standard 2 of 5,
Codabar, Code 93/93i, Code 11, MSI, Plessey, Telepen, PDF417,
Micro PDF417
Works in any lighting conditions, from 0 to 100,000 lux
2000G, 0.7ms, half sinus, 3 axes
50G r.m.s
7.6.1.1 EV15 Imager Decode Zone
0 Lux to 100,000 Lux
Mil Size
Minimum Range
Maximum Range
Inches
Inches
5
2.5
7
10
3
14
UPC
2
14.5
20
2.5
22
40
3
35.5
High quality symbols in normal room light.
7.6.2
SE1200 High Performance And Long Range Specifications
Parameter
SE1200HP
Type
Light Source
Scan Rate
Scan Angle/Field of
View
Scan Patterns
Minimum Print
Contrast
Laser Class 2
Visible Laser Diode 650 nm
35 (± 5) scans/sec (bidirectional)
42º± 2º
SE1200LR
Laser Class 2
Visible Laser Diode 650 nm
35 (± 5) scans/sec (bidirectional)
23º± 2º
Linear
Linear
Minimum 20% absolute
Minimum 40% absolute dark/light
dark/light reflectance measured reflectance measured at 650 nm
at 650 nm
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
207
Chapter 7: Specifications
SE1200 High Performance And Long Range Specifications
Parameter
Symbologies
Supported
Programmable
Parameters
Ambient Light:
SE1200HP
UPC/EAN, Code 128, Code 39,
Code 93, I 2 of 5, Discrete 2 of
5, Codabar, MSI UCC/EAN
128.
Laser On Time, Aim Duration,
Power Mode, Trigger Mode, Bidirectional Redundancy, Symbology types/lengths, Data
formatting.
Artificial: 450 ft. candles
(4844 Lux).
Sunlight: 10000 ft. candles
(107,640 Lux).
Laser Output Power 0.83mW
(peak)
208
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
SE1200LR
UPC/EAN, Code 128, Code 39,
Code 93, I 2 of 5, Discrete 2 of 5,
Codabar, MSI UCC/EAN 128.
Laser On Time, Aim Duration,
Power Mode, Trigger Mode, Bidirectional Redundancy, Symbology
types/lengths, Data formatting.
Artificial: 450 ft. candles
(4844 Lux).
Sunlight: 8000 ft. candles
(86,112 Lux).
1.33mW
Chapter 7: Specifications
SE1200 Advanced Long Range And SE2223PDF Specifications
7.6.3
SE1200 Advanced Long Range And SE2223PDF Specifications
Parameter
Type
Light Source
Scan Rate
SE1200ALR
Laser Class 2
Visible Laser Diode 650 nm
35 (± 5) scans/sec
(bi-directional)
Scan Angle/Field of View 13º± 2º
Scan Patterns
Minimum Print Contrast
Linear
Minimum 40% absolute
dark/light reflectance measured at 650 nm.
SE2223PDF
Laser Class 2
Visible Laser Diode 650 nm
590 scan/sec. 22 frames/sec.
Horizontal: 34º
Vertical: 12.5º
Linear and Smart Raster
Minimum 40% absolute
dark/light reflectance measured at 650 nm.
35% absolute dark/light reflectance differential (PDF).
Symbologies
Supported
UPC/EAN, Code 128,
UCC/EAN 128, RSS, Code 39,
Code 93, I 2 of 5, Discrete 2 of
5, Codabar, MSI.
Programmable Parameters Laser On Time, Aim Duration,
Power Mode, Trigger Mode,
Bi-directional Redundancy,
Symbology types/lengths, Data
formatting.
Ambient Light:
Artificial: 450 ft. candles (4844
Lux).
Sunlight: 4000 ft. candles
(43,056 Lux).
Laser Output Power (peak) 1.35mW
25% absolute dark/light reflectance differential (1-D).
PDF417, Micro PDF,
UPC/EAN, Code 39, Interleaved 2 of 5, Code 128,
Codabar, MSI Plessey, RSS
and Composite codes.
Laser On Time, Aim Duration, Power Mode, Trigger
Mode, Bidirectional Redundancy, Symbology
types/lengths, Data formatting, Pattern Controls.
Artificial: 450 ft. candles
(4844 Lux).
Sunlight: 8000 ft. candles
(86112 Lux).
0.86mW
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
209
Chapter 7: Specifications
SE1200 Advanced Long Range And SE2223PDF Specifications
7.6.3.1 SE1200 And SE2223 Decode Zones
Table 7.1 Decode Zones - HP, LR, And ALR
Bar Code (mil)
Read Distance
High Performance
Min
(inches)
Max
(inches)
Long Range
Min
(inches)
Max
(inches)
Min (inches)
Max
(inches)
5.0
3.0
4.5
7.5
3.0
8.5
10.0
2.5
12.5
13.0
17.5
15.0
2.5
18.5
8.5
33.5
20.0
50.0
20.0
2.5
20.5
9.5
38.5
30.0
60.0
40.0
3.0
29.5
9.5
79.5
30.0
98.0
55.0
3.5
35.5
9.5
89.5
27.0
115.0
Table 7.2 Decode Zones – PDF Scanner
Bar Code (mil)
Raster Laser Scanner Read Distance
PDF Bar Codes
SE2223
Min (inches)
210
Advanced Long Range
Max (inches)
6.5
2.5
6.5
10.0
2.5
9.5
15.0
2.5
15.5
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
SE1224HP Specifications
7.6.4
SE1224HP Specifications
Parameter
Type
Light Source
Scan Rate
Scan Angle/Field of View
Scan Patterns
Minimum Print Contrast
SE1224HP
Ambient Light:
Laser Class 2
Visible Laser Diode 650 nm
35 (± 5) scans/sec (bi-directional)
42º (typical), 30º (narrow)
Linear
Minimum 25% absolute dark/light reflectance measured at
650 nm.
UPC/EAN, Code 128, UCC/EAN 128, RSS, Code 39, Code
93, I 2 of 5, Discrete 2 of 5, Codabar, MSI.
Laser On Time, Aim Duration, Power Mode, Trigger Mode,
Bi-directional Redundancy, Symbology types/lengths, Data
formatting.
Artificial: 450 ft. candles (4844 Lux).
Laser Output Power (peak)
Sunlight: 8000 ft. candles (86112 Lux).
1.35mW
Symbologies Supported
Programmable Parameters
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
211
Chapter 7: Specifications
SE1524ER – Extended Range Scanner
7.6.4.1 SE1224HP Decode Zones
7.6.5
SE1524ER – Extended Range Scanner
Parameter
Type
Light Source
Scan Rate
Scan Angle/Field of View
Scan Patterns
Minimum Print Contrast
Symbologies Supported
212
SE1524ER
Laser Class 2
Visible Laser Diode 650 nm
35 (±5) scans/sec (bi-directional).
13.5° ±0.7°
Linear
Minimum 25% absolute dark/light reflectance measured at
650 nm.
UPC/EAN, Code 128, UCC.EAN128, RSS, Code 39, Code
93, I 2 of 5, Discrete 2 of 5, Codabar, MSI.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
SE1524ER – Extended Range Scanner
Parameter
Programmable Parameters
Ambient Light:
SE1524ER
Laser On Time, Aim Duration, Power Mode, Trigger Mode,
Bi-directional Redundancy, Symbology types/lengths, Data
formatting.
Artificial: 450 ft. candles (4,844 Lux)
Sunlight: 4,000 ft. candles (86,112 Lux).
Laser Output Power (peak) 1.26mW
7.6.5.1 SE1524ER Decode Zones
Figure 7.1 SE1524ER Decode Zone A (Short Range, Small Codes)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
213
Chapter 7: Specifications
SE1524ER – Extended Range Scanner
Figure 7.2 SE1524ER Decode Zone B (Long Range, Large Codes)
214
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
SX5400* Imager Specifications
7.6.6
SX5400* Imager Specifications
Optical Resolution
752H x 480V
Field of view at 160mm
120mm (H) x 78mm (V)
41.1° (H) x 27.4° (V)
Pitch angle
±45°
Skew angle
±45°
Ambient light
0 to 100,000 lux (full sunlight)
300 lux nominal
Minimum contrast
10%
Targeting
Intuitive range finding 626 nm LED
Self Illumination
Red LED (standard)
Supply voltage
5 V ± 10%
Power supply
3.6 Volt DC nominal (2.7 - 5 Volts DC)
Connectivity
USB 1.1 or serial async
Connector to the interface board
Molex 52892-1295 or HiRose FH12-12S-.5SH
Symbologies supported
Code 39; Code 39 Full ASCII; UPC-A, -A2, -A5; UPC-E, -E2, E5; EAN-8 -13; JAN; I2of5; Code 128; Codabar/NW7; RSS 14,
RSS Limited, RSS Expanded, RSS 14 Truncated, PDF417,
microPDF417; Composite, CC-A, CC-B, CC-C; image capture,
Data Matrix; QR Code; Maxicode; Aztec Code; Planet; Postnet;
Royal Mail 4SCC; 4 State postal codes from Australia, Canada,
Japan; Korean Post 3 of 5.
*Formerly known as Symagery SX5400.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
215
Chapter 7: Specifications
External Scanner Specifications
7.6.6.1 SX5400 Imager Performance
The table below presents the typical performance of the SX5400 Imager at 300 lux
(@ 160mm focus when using Grade A photographic-quality bar codes). Shown are the
average near, far, and Depth of Reading (DOR) numbers.
Symbology
Size (mil)
Near Avg.
(inches)
Far Avg.
(inches)
DOR Avg. (inches)
C39
7.5
4.0
7.0
3.0
C39
10
2.75
9.25
6.5
C39
15
2.25
11.0
8.75
PDF6.6
6.6
4.0
6.5
2.5
PDF10
10
3.25
9.0
5.75
PDF15
15
2.25
10.75
8.5
DM15
15
3.0
8.0
5.0
QR15
15
3.75
7.5
3.75
UPC
12.5
3.0
9.5
6.5
7.7
External Scanner Specifications
7.7.1
PowerScan® LR and XLR Industrial Scanner Specifications
Communication
Undecoded
Standard and Intermec-compatible
Mechanical
Dimensions
6.9 x 11.2 x 18.3 cm (2.7 x 4.4 x 7.2 in)
Weight
Scanner - 280 g (9.9 ozs)
Cable (82.3 cm 32 in) - 176 g (6.2 ozs)
Cable lengths
Collapsed: 81 cm (32 in)
Max working: 183 cm (72 in)
216
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
PowerScan® LR and XLR Industrial Scanner Specifications
Electrical
Operating voltage
4 VDC to 14 VDC
Operating current - nominal
Undecoded: 75 mA @ 5 VDC
Decoded: 100 mA @ 5 VDC
Idling current - low power mode 50 µA @ 5 VDC
Optical
Light source
Extra bright 650 nm Visible Laser Diode (VLD)
Scan System
Frictionless lifetime flexure mechanism
Rate
35 scans/sec nominal
Depth of field - Long Range
Paper Labels (decoded)
7.5 mil
6
to 10 in
(15 to 25 cm)
10 mil
5
to 20 in
(13 to 51 cm)
15 mil
5
to 32 in
(13 to 81 cm)
20 mil
5
to 48 in
(15 to 122 cm)
40 mil
8
to 85 in
(20 to 216 cm)
55 mil
15 to 108 in (38 to 274 cm)
Reflective Labels (decoded)
40 mil
22 to 100 in (56 to 254 cm)
55 mil
30 to 104 in (76 to 366 cm)
70 mil
40 to 180 in (102 to 457 cm)
100 mil 45 to 264 in (114 to 671 cm)
Depth of Field - Extra Long
Paper Labels (decoded)
Range
15 mil
28 to 60 in (71 to 152 cm)
20 mil
28 to 72 in (71 to 182 cm)
40 mil
28 to 144 in (71 to 144 cm)
55 mil
40 to 180 in (102 to 457)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
217
Chapter 7: Specifications
PowerScan® LR and XLR Industrial Scanner Specifications
Reflective Labels (decoded)
40 mil
40 to 180 in (102 to 457 cm)
70 mil
80 to 300 in (2032 to 762 cm)
100 mil 80 to 432 in (203 to 1097 cm)
Print Contrast Ratio
25% minimum
Pitch
± 65°
Skew
± 55°
Ambient Light Immunity
Artificial light: 1200 ft. candles.
Sunlight: 8000 ft. candles.
Environmental
Temperature Rating
Operating: -22° to 122° F (-30° to 50° C)
Storage: -40° to 158° F (-40° to 70° C)
Humidity
5 to 95% NC
Shock (at 23° C)
Withstands multiple 6 foot drops to concrete.
Vibration
Meets MIL-STD-810E
Water and Dust
IEC529 rating IP54DW
Decoding Capabilities
Auto-discriminates between:
UPC A, E/EAN8, 13/JAN8, 13
(P2/P5, Code 128 EAN add-ons)
Code 128, MSI/Plessey, Code 39, Interleaved 2 of 5,
Code 39 Full Ascii,
Standard 2 of 5, Code 93, Codabar,
Safety/Regulatory
Electrical
Complies to: Gost R; TUV; UL; cUL
Emissions
Complies to: FCC-A;EN55022-B
BCIQCNS13438; AS/NZS3548; VCCI-B
218
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
PowerScan Standard Range Scanner Specifications
Laser Classification
IEC 60825-1 Ed. 2.0
CDRH 21 CFR 1040 Class II
7.7.2
PowerScan Standard Range Scanner Specifications
Communication
Undecoded
Standard and Intermec-compatible.
Mechanical
Dimensions
6.9 x 11.2 x 18.3 cm (2.7 x 4.4 x 7.2 in)
Weight
Scanner - 280 g (9.9 ozs)
Cable (82.3 cm 32 in) - 176 g (6.2 ozs)
Cable lengths
Collapsed: 81 cm (32 in)
Max working: 183 cm (72 in)
Optical
Light source
Extra bright 650 nm Visible Laser Diode (VLD)
Scan System
Frictionless lifetime flexure mechanism
Rate
35 scans/sec nominal
Depth of field - Standard
Paper Labels (decoded)
7.5 mil
3.0 to 6 in
(9 to 15 cm)
10 mil
1.5 to 15 in
(4 to 38 cm)
15 mil
1.0 to 25 in
(2.5 to 64 cm)
20 mil
1.0 to 35 in
(2.5 to 89 cm)
55 mil
6.0 to 60 in
(15 to 152 cm)
High Density (decoded)
3 mil
1.0 to 2 in
(2.5 to 5.1 cm)
4 mil
1.0 to 3 in
(2.5 to 8 cm)
5 mil
0.8 to 3.8 in (2 to 10 cm)
7.5 mil
0.6 to 4.5 in (1.5 to 11 cm)
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
219
Chapter 7: Specifications
PowerScan Standard Range Scanner Specifications
10 mil
0.2 to 5.5 in (0.5 to 14 cm)
Print Contrast Ratio
25% minimum
Pitch
± 65°
Skew
± 55°
Ambient Light Immunity
Artificial light: 1200 ft. candles.
Sunlight: 8000 ft. candles.
Electrical
Operating voltage
4 VDC to 14 VDC
Operating current nominal
Undecoded: 75 mA @ 5 VDC
Decoded: 100 mA @ 5 VDC
Idling current low power mode
50 µA @ 5 VDC
Environmental
Temperature Rating
Operating: -22° to 122° F (-30° to 50° C)
Storage: -40° to 158° F (-40° to 70° C)
Humidity
5 to 95% NC
Shock (at 23° C)
Withstands multiple 6 foot drops to concrete.
Vibration
Meets MIL-STD-810E
Water and Dust
IEC529 rating IP54DW
Decoding Capabilities
Auto-discriminates between:
UPC A, E/EAN8, 13/JAN8, 13
(P2/P5, Code 128 EAN add-ons)
Code 128, MSI/Plessey, Code 39, Interleaved 2 of 5,
Code 39 Full Ascii,
Standard 2 of 5, Code 93, Codabar,
220
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 7: Specifications
RD7950 Integrated UHF RFID Reader
Safety/Regulatory
Electrical
Complies to: Gost R; TUV; UL; cUL
Emissions
Complies to: FCC-A;EN55022-B
BCIQCNS13438; AS/NZS3548;
VCCI-B
Laser Classification
IEC 60825-1 Ed. 2.0
CDRH 21 CFR 1040 Class II
7.8
RD7950 Integrated UHF RFID Reader
For detailed RD7950 specifications, please see the RD7950 UHF RFID Reader Quick Reference Guide (P/N 8000056).
7.9
HU3000 - 1900 mAh Lithium-ion Battery Pack
For safety instructions, please see “Lithium-ion Battery Safety Precautions” on page xxiv.
Technology
Lithium-ion (Li-Ion)
Operating Temperature
-20°C to 60°C (-4°F to 140°F)
Charge Temperature
5°C to 39°C (41°F to 102°F)
Storage Temperature
-30°C to 60°C (-22°F to 140°C) (Storage at elevated
temperatures is not recommended.)
Charge Cycles
Minimum of 300 charge cycles with no degradation
below 70% of nominal capacity
Charge Time
Charge time is typically 2 hours.
Voltage
7.4 V nominal (6V min. to 8.4V max.)
Cell Configuration
2 series connected cells
Capacity
1.9 Ah nominal at 300mA discharge 20°C to 6.0V
(minimum)
Supported Chargers
6-Gang Charger
Combo Charger
Combo Docking Station
Quad Docking Station
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
221
APPENDIX
A
PORT PINOUTS
A.1 Tether Port Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A.2 Docking Station Connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A.3 Battery Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
A-1
Appendix A: Port Pinouts
Tether Port Pinout
A.1
Tether Port Pinout
The tether port connector incorporates multiplexed undecoded scanner, decoded scanner,
RS-232 serial, and USB interfaces. In order for it to operate, a special wiring scheme is
needed. If you have a need to create cables for the tether port, contact a Psion Teklogix representative and request document #1010032 “Instruction Tether Port Termination”.
Attempting to interface to the tether connector without following this document may cause
damage to the 7535 G2 or the tethered device.
A.2
Docking Station Connector
2 4 6 8 10 12
1 3 5 7 9 11
1. Ext 5V Switched. Used by external peripherals. 5VDC, 1A max.
2. RS-232 Rx Data. Console receive pin.
3. RS-232 Tx Data. Console transmit pin
4. DC Power In (13 - 18VDC @ 3A max). External power adaptor positive input.
5. USB Host Minus. For connecting USB devices.
6. USB Host Plus. For connecting USB devices.
7. DC Power In. Same as pin 4.
8. Docking Station ID. Identifies device attached to the docking station connector. The
external device applies a specific resistance between this pin and ground as
identification.
9. Ground.
10. USB Device Minus. Connects to another USB host, such as a PC.
11. USB Device Plus. Connects to another USB host, such as a PC.
12. Ground.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
A-3
Appendix A: Port Pinouts
Battery Contacts
A.3
Battery Contacts
These contacts represent right to left numbering with the docking port pointing toward you,
and the battery contacts facing upward.
5
4
3
2
1
Pin 1 Indicator
Battery Contacts
A-4
Pin #
Signal
Description
1
POS
Positive Battery
2
CLK
SMBUS Clock
3
BAT_D
Presence/Cell Count
4
DATA
SMBUS Data
5
NEG
Negative Battery
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix A: Port Pinouts
Battery Contacts
Figure A.1 JB5 To USB Type B Cable - P/N CA1020
(Mates with USB devices that incorporate Type B receptacles)
Figure A.2 JB5 To RS-232 Serial Cable - P/N CA1010
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
A-5
B
APPENDIX
SCU FOR RA2041 802.11B/G RADIO
B.1 SCU Tabs . . . . . . . . . . . . . . . . . . .
B.1.1 Main . . . . . . . . . . . . . . . .
B.1.2 Profile . . . . . . . . . . . . . . . .
B.1.3 Status . . . . . . . . . . . . . . . .
B.1.4 Diags . . . . . . . . . . . . . . . .
B.1.2.1 SCU Security Capabilities.
B.1.2.2 SCU EAP Types . . . . . .
B.1.2.3 EAP Credentials . . . . . .
B.1.2.4 ThirdPartyConfig . . . . .
B.1.5 Global. . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 3
. 3
. 4
. 9
. 9
. 6
. 7
. 7
. 8
10
B-1
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
B.1
SCU Tabs
This appendix provides details about each tab in the Summit Client Utility (SCU). For
quick, step-by-step setup instructions, refer to “Summit Client Utility (SCU) For RA2041
802.11b/g Radio” on page 28.
The following sections provide a detailed description of each of the tabs available in the
SCU—Main (below), Profile (page B-4), Status (page B-9), Diags (page B-9), and Global
(page B-10).
B.1.1
Main
The Main tab is displayed when you tap on the Start>Programs>SCU icon.
•
•
•
•
•
Enable/Disable Radio: Enables or disables the radio. This is a toggle button; when the
radio is enabled, this button reads Disable Radio, and when the radio is disabled, the
button reads Enable Radio.
Active Profile: Lists the name(s) of the active configuration profile(s). When a profile
is chosen from the Active Profile drop-down menu, the settings for that profile become
active.
If ThirdPartyConfig is selected, after the 7535 G2 goes through a power cycle, WZC is
used for configuration of the radio. See “ThirdPartyConfig” on page B-8 for details.
Radio Type: Indicates the type of radio installed in the device, e.g. “ABG” when an
802.11a/b/g radio is installed.
Reg. Domain: Indicates the regulatory domain (e.g. ETSI, FCC or TELEC) for which
the radio is configured. “Worldwide” means that the radio can be used in any domain.
Status: Indicates if the radio is associated to an access point. If this is not the case,
Status indicates the radio status.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
B-3
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
•
•
B.1.2
Driver and SCU: These fields display the version of the device driver and the SCU that
are running on the 7535 G2.
About SCU: This box provides details about the SCU software.
Profile
The Profile tab allows you to define radio and security settings that are stored in the registry
as part of the configuration profile.
The profile you create and save is listed in the Active Profile drop-down menu in the Main
tab. You can define up to 20 profiles.
Radio
Attributes
•
•
•
•
•
•
•
B-4
Edit Profile: Used to choose the profile to be viewed or edited. If ThirdPartyConfig is
chosen, after the 7535 G2 goes through a power cycle, WZC is used for configuration of
the radio.
New: Allows you to create a new profile with default settings and assign it a name.
Rename: Allows you to assign a profile name.
Delete: Deletes the profile unless it is currently active.
Scan: Opens a new window which displays a list of available access points with their
respective SSIDs, Signal Strength (RSSI value) and Security Status. Selecting an AP
returns you to the profile page and populates a new profile with the information available from the scan to simplify setting up a new profile.
Radio: Lists radio attributes. These attributes can be individually chosen from this
menu. When an attribute is chosen, an associated list of options is displayed where you
can assign new settings or view existing settings.
Commit: Saves all changes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
The following table describes the options in the Radio attributes, Encryption, and EAP Type
drop-down menus:
Table B.1 Radio, Encryption, And EAP Menus
Radio
Attribute
Description
Value
Default
SSID
Service set identifier (SSID) for
Maximum of 32 characters.
WLAN to which the radio connects.
None
Client
Name
Name assigned to radio & 7535 G2
into which it is installed.
None
Maximum of 16 characters.
Power Save Power save mode for radio.
CAM: Constantly awake.
Fast
Maximum: Maximum power savings.
Fast: Fast power save mode.
Tx Power
Maximum transmit power.
Max: Maximum defined for
current regulatory domain.
Measured in mW: 50,30,10, 1.
Max
Bit Rate
Used by radio when interacting
with WLAN access point.
Auto: Rate automatically negotiated with access point.
Rates in Mbps: 1, 2, 5.5, 6.9 11,
12, 18, 24, 36, 48, 54.
Auto
Radio
Mode
Used by 802.11g when interacting
with access point.
B rates only: 1, 2, 5.5, & 11 Mbps. BG rates
G rates only: 6, 9, 12, 18, 24, 36, optimized
48, and 54 Mbps.
BG rates full: All B and G rates.
BG rates optimized: 1, 2, 5.5, 6,
11, 24, 36 & 54 Mbps.
Auth Type
802.11 authentication type used
Open, shared-key, or LEAP (Netwhen associating with access point. work-EAP).
Open
EAP Type
Extensible Authentication Protocol
type used for 802.1X authentication to access point.
None
None, LEAP, EAP-FAST, PEAPMSCHAP
– To use EAP-TLS, you must
use WZC.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
B-5
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
Table B.1 Radio, Encryption, And EAP Menus
Radio
Attribute
•
Description
Value
Default
Credentials
Authentication credentials for the
selected EAP type.
Refer to “EAP Credentials” on
page B-7.
User: Username or Domain/User- None
name (up to 64 characters).
Password: up to 64 characters.
For PEAP: CA Cert–CA server
certificate filename.
Encryption
Type of encryption used to protect
transmitted data.
None, Manual WEP, Auto WEP
(generated during EAP authentication), WPA PSK, WPA TKIP,
WPA2 PSK, WPA2 TKIP, WPA2
AES, CCKM TKIP.
For Manual WEP: Up to four
static WEP keys.
For PSK: ASCII passphrase or
hex PSK.
None
EAP-Type & Encryption: Security settings. These settings allow you to enhance the
security of data across the wireless LAN. Refer to “EAP Credentials” on page B-7 and
‘SCU Security Capabilities’ below, for details about these settings.
B.1.2.1 SCU Security Capabilities
The SCU provides integrated security to protect transmitted data as well as the 7535 G2 and
wireless WAN infrastructure that transmit and receive data.
A foundational element of the IEEE 802.11i WLAN security standard is IEEE 802.1X and a
critical application on a mobile device is an 802.1X supplicant. This supplicant provides an
interface between the radio and the operating system and supports the authentication and encryption elements required for 802.11i, also known as Wi-Fi Protected Access 2 (WPA2), as
well as predecessors such as WPA and WEP. Summit software includes an integrated supplicant that supports a broad range of security capabilities, including:
•
802.1X authentication using pre-shared keys or an EAP type, required for WPA2 and
WPA.
• Data encryption and decryption using WPA2 AES, WPA TKIP or WEP.
Common EAP types include:
•
B-6
EAP-TLS: Uses the same technology as a follow-on to Secure Socket Layer (SSL). It
provides strong security, but relies on client certificates for user authentication.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
•
PEAP: Provides secure user authentication by using a TLS tunnel to encrypt EAP traffic. Two different inner methods are used with PEAP:
- EAP-MSCHAPV2, resulting in PEAP-MSCHAP: This is appropriate for use against
Windows Active Directory and domains.
- EAP-GTC, resulting in PEAP-GTC: This is for authentication with one-time passwords (OTPs) against OTP databases such as SecureID.
•
•
LEAP: Is an authentication method for use with Cisco WLAN access points. LEAP
does not require the use of server or client certificates. LEAP supports Windows Active
Directory and domains but requires the use of strong passwords to avoid vulnerability to
offline dictionary attacks.
EAP-FAST: Is a successor to LEAP and does not require strong passwords to protect
against offline dictionary attacks. Like LEAP, EAP-FAST does not require the use of
server or client certificates and supports Windows Active Directory and domains.
Note: PEAP and EAP-TLS require the use of Windows facilities for the configuration of
digital certificates.
B.1.2.2 SCU EAP Types
The following EAP types are supported by the integrated supplicant and can be configured
in SCU: PEAP-MSCHAP, PEAP-GTC, LEAP and EAP-FAST. With each of these four
types, if authentication credentials are not stored in the profile, you will be prompted to enter
credentials the first time the radio attempts to associate to an access point that supports
802.1X (EAP).
Consider the following when configuring one of the EAP types:
• PEAP-GTC: SCU supports static (login) passwords only.
• LEAP: Strong passwords are recommended.
• EAP-FAST: SCU supports automatic, not manual, PAC provisioning.
EAP-TLS will work with an 802.11a/b/g radio module when Windows Zero Config (WZC)
rather than the SCU is used to configure the type. With WZC, the native Windows supplicant
instead of the SCU integrated supplicant is used.
B.1.2.3 EAP Credentials
Keep the following in mind when defining security settings:
•
If the credentials specified in the profile are incorrect and that profile is used, the
authentication fails without an error message; you will not be prompted to enter
correct credentials.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
B-7
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
•
•
If the credentials are not specified in the profile, when the radio tries to associate using
that profile, you will be prompted to enter the credentials.
When prompted, you can enter valid credentials, enter invalid credentials, or cancel
the operation.
- If you enter valid credentials and tap OK, the radio will associate and authenticate.
- If you enter invalid credentials and tap on OK, the radio will associate but will not
authenticate; you will be prompted again to enter credentials.
- If you tap on Cancel or clear the credentials fields and tap on OK, the radio will not
attempt to associate with that profile until you perform one of the following actions
(while the profile is the active profile):
- Cause the 7535 G2 to go through a power cycle or suspend/resume.
- Disable and enable the radio, or tap the Reconnect button on the Diags windows.
- Modify the Profile, and tap on Commit.
Alternatively, you can choose another profile as the active profile and then switch back to
the profile for which EAP authentication was cancelled.
B.1.2.4 ThirdPartyConfig
If you choose to configure ThirdPartyConfig, the SCU will work with the operating system’s Windows Zero Config (WZC) to configure radio and security settings for the CF radio
installed in the unit.
Choosing this profile means that WZC must be used to define the following radio and security options: SSID, Auth Type, EAP Type, and Encryption.The SCU settings for
ThirdPartyConfig include: Client Name, Power Save, Tx Power, Bit Rate, and Radio Mode.
These SCU settings along with SCU global settings and the WZC settings will be applied to
the radio module.
B-8
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
B.1.3
Status
The Status tab provides status information including IP address and MAC address for the
client radio, IP address and MAC address for the AP, signal strength, channel, transmit
power and data rate.
B.1.4
Diags
Ping Address
Ping Results
Use the Diags tab as a troubleshooting tool. The functions are as follows:
•
(Re)Connect: Enables/Disables the radio, applies/reapplies current profile and tries to
associate and authenticate to the wireless LAN, logging all activity in the output area at
bottom of the dialog box.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
B-9
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
•
•
•
B.1.5
Release/Renew: Obtains a new IP address through DHCP and logs all activity in the
output area.
Start Ping: Starts a continuous ping to the address in the text box next to this button.
This is a toggle button so when you tap on it, it changes to Stop Ping. Closing this
window or tapping on another button also stops the ping.
Diagnostics: Attempts to connect or reconnect to an AP, and provides a more detailed
dump of data than if you used (Re)connect. The dump includes the radio state, profile
settings, global settings and BSSID list of APs. The SCU is saved to a file called
_sdc_diag.txt in the Windows directory.
Global
The Global settings tab allows you to define radio and security settings that apply to all profiles, along with settings that apply specifically to the SCU. The Global settings in Table B.2
can be edited in SCU.
B-10
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
Table B.2 Global Tab
Global Setting
Description
Value
Default
Roam Trigger
If RSSI from AP is less than roam
dBm: -50, -55, -60, -65, -75
trigger value, radio performs roam scan -70, -75, Custom
or probes for an AP with stronger
signal.
Roam Delta
Amount by which second AP’s RSSI
must exceed the moving average RSSI
for the current AP before the radio will
attempt to roam to a second AP.
dBm: 5, 10, 15, 20, 25,
30, 35, Custom
10
Roam Period
Following an association or roam scan Seconds: 5, 10, 15, 20,
(with no roam), the number of seconds 25, 30, 35, 40, 45, 50,
the radio collects RSSI scan data before 55, 60, Custom
considering roaming.
10
BG Channel Set
Defines the 2.4 GHz channels to be
scanned when the radio is set to roam
and needs to determine what APs are
available.
Full (all channels)
1, 6, 11
1, 7, 13
Custom
Full
DFS Channels
Reserved
Off, On
Off
Aggressive Scan
When this setting is On and the current Off, On
connection to an AP becomes unreliable, the radio scans for available APs
more aggressively. Aggressive scanning complements and works in conjunction with the standard scanning
that is configured through the Roam
Trigger, Roam Delta, and Roam Period
settings. It is recommended that
Aggressive Scan is left On unless there
is significant co-channel interference
because of overlapping coverage from
APs on the same channel.
On
CCX features
Activates three CCX features: APassisted roaming, AP-specified
maximum transmit power and
radio management.
Optimized, Full, Off
Optimized
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
B-11
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
Table B.2 Global Tab
Global Setting
Description
Default
WMM
Use Wi-Fi Multimedia Extensions, also On, Off
know as WMM.
Off
TX Diversity
Defines how to handle antenna diversity when transmitting data to AP.
-Main only: Use main
antenna only.
-Aux only: Use auxiliary antenna only.
-On: Use diversity.
Main only
RX Diversity
Defines how to handle antenna diversity when receiving data from AP.
-On-Start on Main: On
startup, use main
antenna.
-On-Start on Aux: On
startup, use auxiliary
antenna.
-Main only: Use main
antenna only.
-Aux only: Use auxiliary antenna only.
On-Start on
Main
Frag Thresh
Packet is fragmented when packet size
(in bytes) exceeds threshold.
Integer from 256 to
2346.
2346
RTS Thresh
Packet size above which RTS/CTS is
required on link.
An integer from 0 to
2347.
2347
LED
Available only with MCF10G.
On, Off
Off
Tray Icon
Enables the System Tray icon.
Off, On
Off
Hide Passwords
On, Off
On - SCU as well as EAP authentication dialog boxes hide passwords, WEP
keys and other sensitive information.
Off
Admin Password Password that must be specified when
Admin Login button is pressed.
B-12
Value
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
A string of up to 64
characters.
SUMMIT
Appendix B: SCU For RA2041 802.11b/g Radio
SCU Tabs
Table B.2 Global Tab
Global Setting
Description
Value
Default
Auth Timeout
Specifies the number of seconds that
An integer from 3 to 60. 8
the software will wait for an EAP
authentication request to succeed or
fail. If authentication credentials are
specified in the active profile and the
authentication times out, then association will fail. If authentication credentials are not specified in the active
profile and the authentication times out,
then you will be re-prompted to enter
authentication credentials.
Certs Path
Directory where certificates for EAP
authentication are stored.
Valid directory path up
to 64 characters.
Ping Payload
Amount of data to be transmitted on a
ping.
Bytes: 32, 64, 128, 256, 32
512, 1024
Dependent
on device.
Ping Timeout ms Amount of time in milliseconds that
passes without a response before ping
request is considered a failure.
Integer from 0 to
30000.
5000
Ping Delay ms
Integer from 0 to
7200000.
1000
Amount of time in milliseconds
between successive ping requests.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
B-13
C
APPENDIX
BAR CODE SETTINGS
C.1 Bar Code Settings. . . . . . . . . . . . . . . . . .
C.1.1 Scanner Options . . . . . . . . . . . . .
C.1.2 Restoring Default Settings . . . . . . . .
C.2 Decoded (Internal) Scanners . . . . . . . . . . . .
C.2.1 Options . . . . . . . . . . . . . . . . . .
C.2.2 Decoded (Internal) Advanced Options . .
C.2.3 Decoded (Internal) 2D Scanning Options
C.2.4 Decoded (Internal) Data Options . . . . .
C.2.5 Code 39 . . . . . . . . . . . . . . . . . .
C.2.6 Code 128 . . . . . . . . . . . . . . . . .
C.2.7 EAN 13 . . . . . . . . . . . . . . . . . .
C.2.8 EAN 8. . . . . . . . . . . . . . . . . . .
C.2.9 UPC A . . . . . . . . . . . . . . . . . .
C.2.10 UPC E . . . . . . . . . . . . . . . . . .
C.2.11 UPC/EAN Shared Settings . . . . . . .
C.2.12 Code 93 . . . . . . . . . . . . . . . . .
C.2.13 Codabar . . . . . . . . . . . . . . . . .
C.2.14 MSI Plessey . . . . . . . . . . . . . . .
C.2.15 Interleaved 2 of 5 . . . . . . . . . . . .
C.2.16 Discrete 2 of 5 . . . . . . . . . . . . . .
C.2.17 RSS Code (Reduced Space Symbology)
C.2.18 Composite . . . . . . . . . . . . . . . .
C.2.19 PDF-417 . . . . . . . . . . . . . . . . .
C.2.20 Micro PDF-417 . . . . . . . . . . . . .
C.3 Decoded (Intermec ISCP) . . . . . . . . . . . . .
C.3.1 Decoded (ISCP) Options . . . . . . . . .
C.3.2 Decoded (ISCP) Advanced Options . . .
C.3.3 Code 39 . . . . . . . . . . . . . . . . . .
C.3.4 Code 128 . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 5
. 5
. 6
. 8
. 8
. 9
.11
.11
12
15
16
16
17
17
18
19
20
21
22
23
23
24
24
25
26
26
26
27
29
C-1
Appendix C: Bar Code Settings
C.3.5 EAN 13 . . . . . . . . . . . . . . . . . .
C.3.6 EAN 8 . . . . . . . . . . . . . . . . . . .
C.3.7 UPC A . . . . . . . . . . . . . . . . . . .
C.3.8 UPC E Settings . . . . . . . . . . . . . .
C.3.9 UPC/EAN Shared Settings . . . . . . . .
C.3.10 Code 93. . . . . . . . . . . . . . . . . .
C.3.11 Codabar. . . . . . . . . . . . . . . . . .
C.3.12 MSI Plessey . . . . . . . . . . . . . . .
C.3.13 Code 11. . . . . . . . . . . . . . . . . .
C.3.14 Interleaved 2 of 5. . . . . . . . . . . . .
C.3.15 Matrix 2 of 5 . . . . . . . . . . . . . . .
C.3.16 Discrete 2 of 5 . . . . . . . . . . . . . .
C.3.17 Telepen . . . . . . . . . . . . . . . . . .
C.3.18 RSS Code (Reduced Space Symbology).
C.3.19 Composite . . . . . . . . . . . . . . . .
C.3.20 TLC-39 . . . . . . . . . . . . . . . . . .
C.3.21 PDF-417 . . . . . . . . . . . . . . . . .
C.3.22 Micro PDF-417. . . . . . . . . . . . . .
C.3.23 Codablock . . . . . . . . . . . . . . . .
C.4 Imager . . . . . . . . . . . . . . . . . . . . . . . .
C.4.1 Imager Options . . . . . . . . . . . . . .
C.4.2 Imager Advanced Options. . . . . . . . .
C.4.3 Code 39 . . . . . . . . . . . . . . . . . .
C.4.4 Code 128. . . . . . . . . . . . . . . . . .
C.4.5 EAN 13 . . . . . . . . . . . . . . . . . .
C.4.6 EAN 8 . . . . . . . . . . . . . . . . . . .
C.4.7 UPC A . . . . . . . . . . . . . . . . . . .
C.4.8 UPC E . . . . . . . . . . . . . . . . . . .
C.4.9 Code 93 . . . . . . . . . . . . . . . . . .
C.4.10 Codabar. . . . . . . . . . . . . . . . . .
C.4.11 Interleaved 2 of 5. . . . . . . . . . . . .
C.4.12 RSS Code (Reduced Space Symbology).
C.4.13 Composite . . . . . . . . . . . . . . . .
C.4.14 PDF-417 . . . . . . . . . . . . . . . . .
C.4.15 Micro PDF-417. . . . . . . . . . . . . .
C.4.16 2D Data Matrix. . . . . . . . . . . . . .
C-2
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
30
31
31
32
32
33
34
35
36
36
37
38
38
39
40
40
41
41
42
42
42
44
46
47
47
48
48
48
49
49
49
50
50
50
51
51
Appendix C: Bar Code Settings
C.4.17 2D QR Code . . .
C.4.18 2D Maxicode . .
C.4.19 2D Aztec . . . . .
C.4.20 Postal: PlaNET .
C.4.21 Postal: PostNET .
C.4.22 Postal: Australian
C.4.23 Postal: Japanese .
C.4.24 Postal: Korean . .
C.4.25 Postal: Royal. . .
C.4.26 Postal: Kix . . . .
C.4.27 Postal: Canadian .
C.5 Non-Decoded Scanners . . .
C.5.1 Options . . . . . .
C.5.2 Code 39 . . . . . .
C.5.3 Code 128 . . . . .
C.5.4 EAN 13 . . . . . .
C.5.5 EAN 8 . . . . . . .
C.5.6 UPC A. . . . . . .
C.5.7 UPC E . . . . . . .
C.5.8 Codabar . . . . . .
C.5.9 Code 93 . . . . . .
C.5.10 Code 11 . . . . .
C.5.11 Interleaved 2 of 5
C.5.12 MSI Plessey . . .
C.5.13 Discrete 2 of 5 . .
C.5.14 IATA 2 of 5 . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
51
52
52
52
53
53
53
54
54
54
54
55
56
56
58
59
60
60
61
62
62
63
64
64
65
66
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-3
Appendix C: Bar Code Settings
Bar Code Settings
Scanner Options
C.1
Bar Code Settings
The Teklogix Scanners icon in the Control Panel provides dialog boxes in which you can
tailor bar code options and choose the bar codes your scanner will recognize. The parameters are preset with the default settings of the decoded scanner installed in the unit.
For a listing of available scanners and their specifications, please refer to Chapter 7:
“Specifications”.
Figure C.1 Teklogix Scanners Icon
C.1.1
Scanner Options
The drop-down menu to the right of the Scanner option allows you to choose configurations
for one of the following scanner types, depending on what is installed in/on your hand-held:
Decoded (internal), Decoded (Intermec ISCP), Imager, and Non-decoded.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-5
Appendix C: Bar Code Settings
Bar Code Settings
Restoring Default Settings
The symbologies listed change to reflect the scanner you choose and the bar codes it supports. Always defer to your bar code scanner’s programming manual when in doubt about
the availability or settings for any parameter.
Note: Your 7535 G2 comes preconfigured from the factory for internal scanner types. The
type of scanner installed can be determined from the System icon in the Control
Panel, under the System Properties tab.
Important: To improve the decode speed and performance, enable (set to ‘on’) only
those codes that are required by the application.
Keep in mind that some bar code types are only available when an internal imaging scanner
is installed. All internal scanners can be configured using these dialog boxes. External, nondecoded scanners are also configured through the Scanner Properties dialog box.
However, external decoded scanners must be configured by scanning special configuration
bar codes. In these cases, the scanner manufacturer provides programming manuals for configuration purposes.
•
•
C.1.2
For the Symbol LS3408 decoded scanner, refer to the programming guide supplied with
your scanner.
For PowerScan® (PSC) decoded scanners, refer to the PowerScan Programming Guide
Restoring Default Settings
If you want to restore the factory defaults after making changes, the defaults can be applied
to a selected parameter, sub-tree of parameters, or all scanner parameters.
C-6
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Bar Code Settings
Restoring Default Settings
•
Press and hold the stylus on a symbology (e.g., Code 128) to display a pop up a menu.
•
Choose Default subtree to reset only the parameters in the symbology you selected, or
choose Default all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
•
Press and hold the stylus on the parameter you want to reset.
•
Choose Default parameter to reset the parameter to the default setting.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-7
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Options
C.2
Decoded (Internal) Scanners
•
C.2.1
Tap on the Scanner drop-down menu, and choose Decoded (internal).
Options
Note: Some options are available only for specific scanners. Refer to the option names in
this section for scanner model identification.
Dot Time (msec)
The value selected for Dot Time (msec) determines (in milliseconds) how long the targeting
dot remains on before the scanner switches to a normal scan sweep. When you double-tap
on this parameter, a dialog box is displayed in which you can enter a value of 0 msec, 200
msec or 400 msec. A value of 0 (zero) disables the target dot.
Aim Duration
This parameter determines the total time the aiming pattern appears before the scanner laser
begins sweeping. When you double-tap on this parameter, a dialog box is displayed in which
you can enter a value from 0 to 30 (0 to 3 sec.). A value of 0 (zero) disables the aiming-dot.
Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 5 and 99, each number representing 0.1 seconds.
C-8
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Decoded (Internal) Advanced Options
C.2.2
Decoded (Internal) Advanced Options
Continuous Scan Mode
Setting this parameter to on keeps the laser on and continuously decoding as long as the
scanner button is pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned
off, once the scanner trigger or button is released. This gives the scanner a minimum amount
of time to complete its current decode before the scan is cancelled when you quickly trigger
on/off.
Power Mode
This parameter is a power-saving option. Tapping on it displays a screen listing two power
mode options: Continuous Power and Low Power.
In Continuous Power mode, the scanner is always on, waiting for a trigger pull or a serial
communication.
In Low Power mode, the scanner is in a standby state, drawing minimal power until a trigger
pull or serial communication wakes it. Keep in mind that while this option is more suitable
for battery powered applications, there will be a slight delay while the scanner powers up to
scan a bar code.
Low Power Timeout
To extend laser life, you can select the time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a
successful decode restores normal blinking.
This is only used if the unit’s Trigger Mode has been changed to Continuous On. If the
unit is used in a fixed mount this parameter might be used, but not if the unit is used as
a hand-held.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
value of 30 sec., 1 min., 2 min. or 3 min.
Note: This parameter is only used if the Trigger Mode has been set to Continuous On and
the 7535 G2 is mounted in a fixed position; otherwise, ‘Low Power Timeout’ is
not used.
Parameter Scanning
Setting this parameter to on enables decoding of parameter bar codes.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-9
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Decoded (Internal) Advanced Options
Linear Security Level
This parameter allows you to select the security level appropriate for your bar code quality.
There are four levels of decode security for linear code types (e.g., Code 39,
Interleaved 2 of 5). Higher security levels should be selected for decreasing levels of bar
code quality. As security levels increase, the scanner’s decode speed decreases.
Double-tapping on this parameter displays a dialog box in which you can enter a value from
1 to 4.
Linear security level 1 specifies that the following code types must be successfully read
twice before being decoded:
Code Type
Codabar
MSI Plessey
D 5 of 5
I 2 of 5
Length
All
4 or less
8 or less
8 or less
Linear security level 2 specifies that all types of codes must be successfully read twice
before being decoded.
Linear security level 3 specifies that code types other than the following must be successfully read twice before being decoded. The following codes must be read three times:
Code Type
MSI Plessey
D 2 of 5
I 2 of 5
Length
4 or less
8 or less
8 or less
Linear security level 4 requires that all code types be successfully read three times before
being decoded.
Bi-Direction Redundancy
Note: This parameter is only valid if a” Linear Security Level” is enabled.
When this parameter is enabled, a bar code must be successfully scanned in both directions
(forward and reverse) before being decoded.
C-10
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Decoded (Internal) 2D Scanning Options
Scan Angle
This option allows you to choose from two scan angles: Normal Angle or Alternate Angle.
Choosing Normal Angle allows the normal operation for scanning long range and short
range. Choosing Alternate Angle widens the beam to allow scanning of long bar codes at
short range but at the cost of long range scanning.
C.2.3
Decoded (Internal) 2D Scanning Options
Scanning Mode
When you double-tap on this parameter, a dialog box is displayed in which you can choose
one of the following scanning modes: Smart Raster, Always Raster, Programmable Raster,
Slab Pattern, Cyclone Pattern, or Semi-Omni Pattern.
Raster Height And Raster Expand Rate
These parameters determine the laser pattern’s height and rate of expansion.
Note: These parameters are only used when either Programmable Raster or
Always Raster is assigned to the “2D Scanning Mode” parameter. “2D Raster
Height” and “2D Raster Expand Rate” are intended for very specific applications
and are usually not required for normal scanning purposes.
Double-tapping on these parameters displays dialog boxes in which you can enter a value
from 1 to 15.
C.2.4
Decoded (Internal) Data Options
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
transmit code: None, AIM or Symbol.
Scan Data Format
This parameter allows you to change the scan data transmission format.
Double-tapping on Scan Data Format displays the following options from which you can
choose a data format: data (as-is), data [S1], data [S2], data [S1][S2], [P] data, [P] data
[S1], [P] data [S2] and [P] data [S1][S2].
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-11
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Code 39
Prefix [P], Suffix [S1] And Suffix [S2]
A prefix and/or one or two suffixes may be appended to scan data for use in data editing.
When you double-tap on these parameters, dialog boxes are displayed in which you can
enter a value from 0 to 255.
Delete Char Set ECIs
Setting this parameter to on enables the scanner to delete any escape sequences representing
Character Set ECIs (Extended Channel Interpretations [also known as GLIs]) from its buffer
before transmission.
When this parameter is enabled, the scanner transmits data from PDF417 and MicroPDF417
bar codes containing Character Set ECIs, even when the ECI Protocol is disabled.
ECI Decoder
Setting this parameter to on enables the scanner to interpret any Extended Channel Interpretations (ECIs) supported by the scanner. This parameter has no effect on symbols that were
not encoded using ECIs.
If this parameter is set to off and a symbol that was encoded using an ECI escape is scanned,
the scanner transmits the ECI escape followed by the uninterpreted data.
C.2.5
Code 39
Enabled
Setting this parameter to on enables “Code 39”.
Enable Trioptic Code 39
Note: “Trioptic Code 39” and “Full ASCII” should not be enabled simultaneously. The
scanner does not automatically discriminate between these two symbologies.
Trioptic Code 39 symbols always contain six characters. Setting this parameter to on allows
this type of symbology to be recognized.
Convert To Code 32
Note: “Code 39” must be enabled in order for this parameter to function.
Setting this parameter to on allows the scanner to convert the bar code from “Code 39” to
“Code 32”.
C-12
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Code 39
Code 32 Prefix
Note: “Convert to Code 32” must be enabled in order for this parameter to function.
When this parameter is enabled, the prefix character “A” is added to all “Code 32”
bar codes.
Set Length L1 And Set Length L2
Lengths for “Code 39” can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes labelled Set Code Lengths where
you can define the code length that will be decoded by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 2 to 55.
Check Digit Verification
When this parameter is enabled, the integrity of a “Code 39” symbol is checked to ensure
that it complies with specified algorithms.
Note: Only those “Code 39” symbols that include a MOD 43 check digit are decoded
when this parameter is enabled.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-13
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Code 39
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Decode Performance
If this parameter is enabled, one of three decode levels can be chosen in the Decode Performance Level parameter.
Decode Perf. Level
This parameter provides three levels of decode performance or “aggressiveness” for Code
39 symbols. Increasing the performance level reduces the amount of required bar code orientation—this is useful when scanning very long and/or truncated bar codes. Keep in mind
that increased levels reduce decode security.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
Length Restriction
The parameters in this sub-menu allow you to define the length of the bar codes that will be
decoded using either the Field Size parameter or the Minimum Size and Maximum Size parameters (see below). The order of operation to either match the Field Size or determine if
the length falls between the Minimum Size and Maximum Size is as follows:
•
•
•
Strip the leading and trailing characters.
Add the prefix and suffix characters.
Count the number of characters remaining to either match the field size or determine if
the length falls between the minimum and maximum size.
Field Size
When a value is assigned for this parameter, only bar codes that match the field size exactly
can be transmitted. If a value is assigned to this parameter, a Minimum Size and Maximum
Size value is not required.
C-14
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Code 128
Minimum Size And Maximum Size
When a value is assigned to these parameters, only bar code lengths that fall between the
minimum and maximum value can be decoded. If values are assigned to these parameters, a
Field Size value is not required.
Add/Remove Data
Prefix Char
This character, if non-zero, is added before a successfully decoded bar code. Press the key
you want to insert in the dialog box attached to this parameter. The ASCII/Unicode key
value of the keypress is displayed.
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Press the key you
want to insert in the dialog box attached to this parameter. The ASCII/Unicode key value of
the keypress is displayed.
Strip Leading
This parameter determines the number of characters that will be removed from the beginning of the bar code before the prefix character is added.
Note: For Code 39 bar codes, the “AIAG Strip” is performed before the “Strip Leading”.
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.
C.2.6
Code 128
Enabled
Set this parameter to on to enable “Code 128”.
Enable GS1-128/GS1 US
Previously UPC/EAN and UCC, the GS1-128/GS1 US types of bar code include group separators and start codes.
Enable ISBT 128
To successfully scan this type of bar code, this option must be set to on.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-15
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
EAN 13
Decode Performance
If this parameter is set to on, one of three decode levels assigned to the Decode Performance
Level parameter can be selected.
Decode Perf. Level
This parameter provides three levels of decode performance or “aggressiveness” for Code
128 symbols. Increasing the performance level reduces the amount of required bar code orientation, allowing you to scan at an angle horizontal to the bar code. This is useful when
scanning very long and/or truncated bar codes. Keep in mind that increased levels reduce
decode security. There is a limitation that it can only be used with one fixed length.
When you double-tap on this parameter, a dialog box is displayed in which you can enter a
decode performance level of between 1 and 3.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.7
EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.8
EAN 8
Enabled
Set this parameter to on to enable “EAN 8”.
EAN-8 Zero Extend
When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols,
making them compatible in format to EAN-13 symbols. Disabling this parameter returns
EAN-8 symbols to their normal format.
C-16
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
UPC A
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.9
UPC A
Enabled
Set this parameter to on to enable “UPC A”.
UPC-A, Check Digit
If you enable this parameter, the check digit is included with the decoded bar code data.
UPC-A, Preamble
When you double-tap on this parameter, a dialog box is displayed where you can choose one
of three options for lead-in characters for UPC-A symbols transmitted to the host device:
System Char—system character transmitted with the data,
Country Code and System Char—both the country code (“0” for USA) and system
character are transmitted with the data, or
None—no preamble is transmitted. The lead-in characters are considered part of
the symbol.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.10 UPC E
Enabled UPC-E
Set this parameter to on to allow “UPC E” bar code scans.
Enabled UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-17
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
UPC/EAN Shared Settings
UPC-E And UPC-E1 Preamble
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmitted to the host device:
System Char—system character transmitted with the data,
Country Code and System Char—both the country code (“0” for USA) and system
character are transmitted with the data, or
None—no preamble is transmitted. The lead-in characters are considered part of
the symbol.
Conv. UPC-E To UPC-A
This parameter converts UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
Conv. UPC-E1 To UPC-A
This parameter converts UPC-E1 (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.11 UPC/EAN Shared Settings
The parameters you set here are a shared across all available UPC and EAN bar codes.
Enable Bookland EAN
Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes.
Supplementals
Supplementals are additionally appended characters (2 or 5).
Double-tapping this parameter displays a list of options. If Ignore is chosen, UPC/EAN is
decoded and the supplemental characters are ignored. If Decode is chosen, UPC/EAN
symbols are decoded with supplementals. Autodiscriminate works in conjunction with the
Supp. Redundancy parameter.
C-18
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Code 93
Supp. Redundancy
With “Autodiscriminate” selected in the Supplementals parameter, Supp. Redundancy
adjusts the number of times a symbol without supplementals is decoded before transmission.
When you double-tap on this parameter, a dialog is displayed in which you can enter a value
between 2 and 20. A value of 5 or above is recommended when Autodiscriminate is selected
and you are decoding a mix of UPC/EAN symbols with and without supplementals.
Security Level
This parameter controls the tolerance for decoding edge-to-edge UPC/EAN bar codes.
Double-tapping on this parameter displays a dialog box in which you can choose a level
from 0 to 3. Lower values have a lower tolerance for misreads, but they also increase the
time it takes to decode the bar code.
Linear Decode (Model SE2223)
Linear Decode applies to code types containing two adjacent blocks (e.g., UPC-A, EAN-8,
EAN-13). When enabled (set to on), a bar code is transmitted only when both the left and
right blocks are successfully decoded within one laser scan. This option should be enabled
when bar codes are in proximity to each other.
2D UPC Half Block Stitching (Model SE2223)
Setting this parameter to on enables “UPC Half Block Stitching” for the SE2223 omnidirectional engine only.
C.2.12 Code 93
Enabled
Set this parameter to on to enable “Code 93”, or off to disable it.
Set Length L1 And Set Length L2
Lengths for “Code 93” can be set for Any Length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters
(i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-19
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Codabar
selected lengths. Length within a range allows you to decode a code type within a specified
range from 4 to 55.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.13 Codabar
Enabled
Set this parameter to on to enable “Codabar”.
Set Length L1 And Set Length L2
Lengths for “Codabar” can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 5 to 55.
CLSI Editing
When enabled, this parameter strips the start and stop characters and inserts a space after the
first, fifth, and tenth characters of a 14-character Codabar symbol.
Note: Symbol length does not include start and stop characters.
NOTIS Editing
When enabled, this parameter strips the start and stop characters from decoded
Codabar symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
C-20
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
MSI Plessey
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.14 MSI Plessey
Enabled
Set this parameter to on to enable “MSI Plessey”.
Set Length L1 And Set Length L2
Lengths for “MSI Plessey” can be set for Any length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 6 to 55.
Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose One or
Two check digit(s).
If this parameter is set to One, it is assumed that the last digit is a check digit. If “Check
Digits” is set to Two, it is assumed that the last two digits are check digits.
Note: If Two check digits is selected, an MSI Plessey “Check Digit Algorithm” must also
be selected. See below for details.
Transmit Check Digit
If this parameter is enabled, the check digit is included with the bar code data.
Check Digit Algorithm
When the Two MSI Plessey check digits option is selected, an additional verification is required to ensure integrity. Double-tapping on this parameter displays a dialog box in which
you can choose the algorithm to be used: MOD 10/MOD 11 or MOD 10/MOD 10.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-21
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Interleaved 2 of 5
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.15 Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
Set Length L1 And Set Length L2
Lengths for “Interleaved 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters
(i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 4 to 14.
Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies
with a specified algorithm: either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council).
Transmit Check Digit
If this parameter is enabled, the check digit is included with the bar code data.
Convert To EAN 13
If this parameter is enabled, an I 2 of 5 bar code is converted to EAN 13.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C-22
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Discrete 2 of 5
C.2.16 Discrete 2 of 5
Enabled
Set this parameter to on to enable “Discrete 2 of 5”.
Set Length L1 And Set Length L2
Lengths for “Discrete 2 of 5” can be set for Any length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 1 to 12.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.17 RSS Code (Reduced Space Symbology)
Enable
Setting any of these parameters to on enables “2D RSS Code” scanning capability.
Enable RSS-14 (Reduced Space Symbology)
RSS-14 code can be either purely linear or split in half with one half stacked on top of the
other half. Stacking the code reduces the bar code length, and providing the nominal height
of the code is maintained, it can be omni-directionally scanned.
Enable RSS Limited
“RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item
number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read
omni-directionally.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-23
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Composite
Enable RSS Expanded
“RSS Expanded” uses the same application identifiers as UCC/EAN-128 codes but it can be
split into sections and stacked several rows high, reducing the length of the symbol, while
increasing the capacity of data that can be stored. “RSS Expanded” code can be omnidirectionally scanned.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.18 Composite
Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled. In addition, “Center Bar
Code Only” must be disabled (see page C-43).
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners. The options available
for this parameter represent multi-level components of a composite symbol.
Enable CC-C And Enable CC-AB
To activate these components, set the parameters to on.
Enable TLC-39
This composite component integrates MicroPDF417 with the linear code. Setting this parameter to on enables this parameter.
C.2.19 PDF-417
Enabled
Setting this parameter to on enables PDF-417 two dimensional (2D) coding.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
C-24
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners
Micro PDF-417
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.2.20 Micro PDF-417
Enabled
Setting this parameter to on enables “2D Micro PDF-417” bar code scanning. Micro PDF417 is a multi-row symbology that is useful for applications requiring greater area efficiency
but lower data capacity than PDF-417.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro PDF-417
symbols as if it was encoded in Code 128 symbols.
If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted
with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of
the following prefixes:
]L3 if the first codeword is 903-907, 912, 914, 915
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-25
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Decoded (ISCP) Options
C.3
Decoded (Intermec ISCP)
•
C.3.1
Tap on the Scanner drop-down menu, and choose Decoded (Intermec ISCP).
Decoded (ISCP) Options
Laser On Time
The value assigned to this parameter determines how long the laser will remain on when the
scan button or trigger is pressed.
Double-tapping on this parameter displays a dialog box in which you can enter a value
between 1 and 10 seconds.
C.3.2
Decoded (ISCP) Advanced Options
Continuous Scan Mode
Setting this parameter to on keeps the laser on and continuously decoding as long as the
scanner button is pressed and held down.
Minimum Cancel Time
The value assigned to this parameter determines the time delay before the scanner is turned
off, once the scanner trigger or button is released. This gives the scanner a minimum amount
of time to complete its current decode before the scan is cancelled when you quickly trigger
on/off.
C-26
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 39
Low Power Timeout
To extend laser life, you can select the time the scanner remains active following a successful decode. The scanner wakes from low power mode when a bar code is scanned—a
successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
value of 30 sec, 1 min, 2 min, or 3 min.
Note: This parameter is only used if the Trigger Mode has been set to Continuous On and
the unit is mounted in a fixed position; otherwise, ‘Low Power Timeout’ is not used.
Parameter Scanning
Setting this parameter to Enabled allows decoding of parameter bar codes.
Same Read Validate
The data is only transmitted after repeated reads give the same result. The value assigned at
this parameter determines the number of reads required, from 0 to 10 times.
Same Read Timeout
Prevents the same bar code from being read more than once. The value assigned determines
after what time period the scanner will timeout, from 0 to 2550 msec.
Diff Read Timeout
Prevents unwanted reading of other bar codes on the same label. The value assigned determines after what time period the scanner will timeout, from 0 to 2550 msec.
Add AIM ID Prefix
The AIM ID (Association for Automatic Identification and Mobility) is an international bar
code identifier. When this parameter is enabled, the AIM ID is inserted at the beginning of
the decoded bar code.
C.3.3
Code 39
Enable
Setting this parameter to on enables “Code 39”.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-27
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 39
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting, Extended, allows for increased reading distance.
Start/Stop Transmit
Setting this parameter to on enables the transmission of start and stop characters, which are
usually not transmitted. Code 39 can start and end with either a * or a $ character (see also
the next parameter).
Accepted Start Char
This parameter allows you the option of using one of the two start/stop characters or both ($
char, * char, $ and * char).
Check Digit Verification
Uses the specified algorithm of the option you've chosen to ensure the integrity of the
symbol data before transmitting. If the data does not contain that algorithm, the data is not
transmitted. The available options are: Disabled, MOD 43 Check, French CIP, or
Italian CIP.
Note: French CIP (French pharmaceutical) is only used with bar codes containing
7 characters.
Italian CIP (Italian pharmaceutical) is also known as Code 32. It is transmitted as a
standard Code 39 if checksum is not validated.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
C-28
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 128
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.4
Code 128
Enabled
Setting this parameter to on enables “Code 128”.
GS1-128
“GS1-128” is the GS1 implementation of the Code 128 barcode specification. The former
correct name was UCC/EAN-128.
GS1-128 Identifier
“GS1-128 Identifier” allows the AIM ID " ]C1" for EAN 128 to be transmitted or removed.
By default, this identifier is transmitted if EAN 128 is enabled.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.
Important: When EAN 128 and GTIN processing are both activated, it is not possible
to read normal EAN 128 Codes.
FNC1 Conversion
“FNC1 Conversion” allows the FNC1 character to be converted to another character for applications that cannot use the default <GS> Group Separator or hex (1d).
Double-tapping on this option displays a dialog box listing the allowable range: 0 to 255.
Enable ISBT 128
To successfully scan this type of bar code (International Society of Blood Transfusion), this
option must be set to on. If you enable this type of bar code, Code 128/EAN 128 is deactivated to avoid any confusion.
ISBT Concat Transmit
The codes are not concatenated by default. You need to choose one of the options provided
for this parameter to send concatenated code. Choosing Only Concatenated Codes transmits
only concatenated codes—single codes will not be transmitted. Choosing Concatenated or
Single transmits single codes or concatenated codes. If only one code of a pair is read, that
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-29
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
EAN 13
code will be transmitted as a single code. If both codes in a pair are detected, they will be
concatenated provided that “ISBT Concat Any Pair” (see below) is enabled.
ISBT Concat Any Pair
Enabling this parameter causes all code pairs that can be, to be concatenated even if they do
not comply with Section 4.1 of the “ISBT 128 Bar Code Symbology and Application Specification for Labeling of Whole Blood and Blood Components” (June 2000, Version 1.2.1).
Reading Range
Determines the reading distance from which a bar code can be successfully scanned. The
default setting, Extended, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are Disabled or French CIP. This parameter uses
the specified algorithm of the option you've chosen to ensure the integrity of the symbol data
before transmitting. If the data does not contain that algorithm, the data is not transmitted.
Note: French CIP (French pharmaceutical) is only used with bar codes containing
7 characters.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.5
EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
ISBN Conversion
When this parameter (International Standard Book Number) is enabled, the first 3 characters
(‘978’) are ignored and the checksum (0.9, ‘X’) is calculated on the remaining characters.
C-30
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
EAN 8
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.6
EAN 8
Enabled
Set this parameter to on to enable “EAN 8”.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Convert To EAN 13
If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.7
UPC A
Enabled
Set this parameter to on to enable “UPC A” bar code scanning recognition.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-31
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
UPC E Settings
C.3.8
UPC E Settings
Enabled
Set this parameter to on to enable “UPC E”.
Enable UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To UPC-A
This parameter converts UPC E (zero suppressed) decoded data to UPC A format before
transmission. After conversion, data follows UPC A format and is affected by UPC A programming selections (e.g. Check Digit).
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.9
UPC/EAN Shared Settings
The setting assigned to the “Addendum” parameter associated with this option is shared
across all UPC and EAN bar codes.
Addendum
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides two options: Not Required but Transmitted if Read or Required and Transmitted.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When “Addendum” is set to Not Required but Transmitted if Read, the scanner searches for
an addendum and if one exists, appends it to the main bar code. When the parameter is set to
Required and Transmitted, the scanner does not accept the main bar code without
an addendum.
C-32
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 93
Addendum Add-on 2 And Addendum Add-on 5
Enabling these parameters sets the length of the addendum bar code to either 2 or
5 characters.
Addendum Security
If you tap on “Addendum Security”, a dialog box is displayed in which you can define the
security level of add-on 2 or add-on 5 with a value from 0 to 100. As security levels increase, the scanner decode speed decreases.
GTIN Compliant
GTIN (global trade item number) processing transmits EAN 128 as the 14-character
EAN/UCC GTIN. To use GTIN processing, you must activate the EAN 128 symbology.
Important: When EAN 128 and GTIN processing are both activated, it is not possible
to read normal EAN 128 Codes.
Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting, Extended, allows for increased reading distance.
C.3.10 Code 93
Enabled
Set this parameter to on to enable “Code 93”.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-33
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Codabar
C.3.11 Codabar
Enabled
Set this parameter to on to enable “Codabar”.
Start/Stop Transmit
Codabar can use the following sets of characters as start and stop characters:
a, b, c, d
A, B, C, D
a, b, c, d, /, t, n, *, e
DC1, DC2, DC3, DC4
Thus, when a set is chosen, the first and last digits of a Codabar message must be one of
those characters and the body of the message should not contain these characters. Setting
this parameter to Not Transmitted strips the start and stop characters from this bar code.
CLSI Library System
When enabled, spaces are inserted after characters 1, 5, 10 in the 14-character label (used in
the USA by libraries using the CLSI system).
Check Digit Verification
When enabled, this parameter checks the integrity of a symbol to ensure it complies with a
specified algorithm—either USS (Uniform Symbology Specification) or OPCC (Optical
Product Code Council).
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Set Length L1, Set Length L2, And Set Length L3
Lengths for “Codabar” can be set from 0 to 255. The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can choose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
C-34
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
MSI Plessey
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.12 MSI Plessey
Enabled
Set this parameter to on to enable “MSI”.
Enable Plessy
Set this parameter to on to enable “Plessy”.
Check Digit Verification
The available options for this parameter are MOD 10 Check and Double MOD 10 Check.
This parameter uses the specified algorithm of the option you've chosen to ensure the integrity of the symbol data before transmitting. If the data does not contain that algorithm, the
data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Plessy Transmit Check Digit
If the check digit is to be transmitted with the Plessy data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Plessy Minimum Length
Minimum lengths for the Plessy bar code can be set from 0 to 255. The length of a code
refers to the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-35
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Code 11
C.3.13 Code 11
Enabled
Set this parameter to on to enable “Code 11”.
Check Digit Verification
The available options for this parameter are MOD 10 Check and Double MOD 10
Check.This parameter uses the specified algorithm of the option you've chosen to ensure the
integrity of the symbol data before transmitting. If the data does not contain that algorithm,
the data is not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.14 Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
Reading Range
This parameter determines the reading distance from which a bar code can be successfully
scanned. The default setting, Extended, allows for increased reading distance.
Check Digit Verification
The available options for this parameter are Disabled, MOD 10 Check and French CIP.
“Check Digit Verification” uses the specified algorithm of the option you've chosen to
ensure the integrity of the symbol data before transmitting. If the data does not contain that
algorithm, the data is not transmitted.
C-36
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Matrix 2 of 5
Note: French CIP (French pharmaceutical) is only used with bar codes containing
7 characters.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Set Length L1, Set Length L2, And Set Length L3
Lengths for “Interleaved 2 of 5” can be set from 0 to 255. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.15 Matrix 2 of 5
Enabled
Set this parameter to on to enable “Matrix 2 of 5”.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-37
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Discrete 2 of 5
C.3.16 Discrete 2 of 5
Enabled
Set this parameter to on to enable “Discrete 2 of 5”.
Standard 2 of 5 Format
This parameter allows you to choose a standard format – either Identicon (6 start/stop bars)
or Computer Identics (4 start/stop bars).
Check Digit Verification
The available options for this parameter are Disabled and MOD 10 Check. “Check Digit
Verification” uses the specified algorithm of the option you've chosen to ensure the integrity
of the symbol data before transmitting. If the data does not contain that algorithm, the data is
not transmitted.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Set Length L1, Set Length L2, And Set Length L3
Lengths for “Discrete 2 of 5” can be set from 0 to 255. The length of a code refers to the
number of characters (i.e., human readable characters), including check digit(s).
Double-tapping on these parameters displays dialog boxes where you can define the code
length that will be recognized by your scanner.
Length Mode
You can chose to set L1 as Minimum Length or L1,L2,L3 as Fixed Length.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.17 Telepen
Enabled
Set this parameter to on to enable “Telepen”.
C-38
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
RSS Code (Reduced Space Symbology)
Format
This parameter allows you to set the bar code character format to either ASCII or Numeric.
Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.18 RSS Code (Reduced Space Symbology)
Enable
Setting this parameter to on enables “RSS Code” scanning capability.
Enable RSS-14
RSS-14 code can be either purely linear or split in half with one half stacked on top of the
other half. Stacking the code reduces the bar code length, and providing the nominal height
of the code is maintained, it can be omni-directionally scanned.
Enable RSS Limited
‘RSS-Limited” is restricted, in that it can only encode 14 digit GTINs (global trade item
numbers) that begin with either 0 or 1. It is not stackable and is not designed to be read
omni-directionally.
Enable RSS Expanded
‘RSS Expanded” uses the same application identifiers as UCC/EAN-128 codes but they can
be split into sections and stacked several rows high, reducing the length of the symbol, while
increasing the capacity of data that can be stored. “RSS Expanded” code can be omni-directionally scanned.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-39
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
Composite
C.3.19
Composite
Important: To successfully read this type of bar code, the two types of symbologies
included in a composite bar code must be enabled. In addition, “Center Bar
Code Only” must be disabled (see page C-43).
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners.
The options available for this parameter represent multi-level components of a
composite symbol.
Enable CC-C And Enable CC-AB
To activate these components, set these parameters to on.
Linear Transmission Only
When Linear Transmission Only is enabled, only the linear code portion of the composite
bar code is transmitted when scanned.
UPC-EAN Composite Message
This option allows you to choose how UPC-EAN shared bar codes are transmitted: Always
Linked, Never Linked or Auto-discriminate.
C.3.20
TLC-39
Enabled
This composite component integrates MicroPDF417 with the linear Code 39 symbol.
Setting this parameter to on enables this parameter.
Linear Transmission Only
When Linear Transmission Only is enabled, only the linear portion of the composite bar
code is transmitted when scanned.
Security Level
This parameter is used to differentiate between TLC-39 and standard Code 39. Tapping on
Security Level displays a dialog box in which you can assign a value from 0 to 100. The
higher the value assigned, the lower the decode rate.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
C-40
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Intermec ISCP)
PDF-417
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.21 PDF-417
Enabled
Set this parameter to on to enable “2D PDF-417”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.22 Micro PDF-417
Enabled
Set this parameter to on to enable “2D Micro PDF-417”.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro PDF-417
symbols as if it was encoded in Code 128 symbols.
If Code 128 Emulation is enabled, the following Micro PDF-417 symbols are transmitted
with one of the following prefixes:
]C1 if the first codeword is 903-907, 912, 914, 915
]C2 if the first codeword is 908 or 909
]C0 if the first codeword is 910 or 911
If Code 128 Emulation is set to off, the Micro PDF-417 symbols are transmitted with one of
the following prefixes:
]L3 if the first codeword is 903-907, 912, 914, 915
]L4 if the first codeword is 908 or 909
]L5 if the first codeword is 910 or 911
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-41
Appendix C: Bar Code Settings
Imager
Codablock
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.3.23 Codablock
Enable Codablock A
Set this parameter to on to enable “Codablock type A”.
Enable Codablock F
Set this parameter to on to enable “Codablock type F”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4
Imager
•
C.4.1
Tap on the Scanner drop-down menu, and choose Imager.
Imager Options
TekImager Enabled
Setting this option to on enables the imager installed in your hand-held.
C-42
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
Imager Options
Continuous Scan Mode
Setting this parameter to on keeps image capture active and continuously decoding as long
as the scanner button is pressed and held down.
Center Barcode Only
Note: This parameter must be disabled when reading Composite bar codes.
When more than one bar code is visible in a single snap shot, this parameter allows you to
specify that only the centre image within the imager framing marker be read. When this parameter is set to on, the target dot is pointed at the centre image and only that image is
returned.
Max Number Barcodes
Specifies the maximum number of bar codes the imager attempts to decode in an image. A
maximum of 6 bar codes can be decoded at one time.
Barcodes Must Decode
This parameter specifies the minimum number of bar codes that the imager must decode in
order to report success.
Note: This number must be less than the number of bar codes assigned to Max Number
Barcodes. The driver validates and reassigns the value if necessary.
Window Width
“Window Width” determines the width of the captured image in pixels.
Note: The driver will validate and reassign the value assigned to this parameter, if necessary; the driver will also use the Window Width value to horizontally center the
image in the field of view.
Window Height
This parameter determines the height of the captured image in pixels.
Note: The driver will validate and reassign the value assigned to this parameter, if necessary; the driver will also use Window Height value to vertically center the image in
the field of view.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-43
Appendix C: Bar Code Settings
Imager
Imager Advanced Options
Dot Time (msec)
The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner begins capturing images. When you double-tap on this
parameter, a dialog box is displayed in which you can enter a value of between 0 and 3000.
A value of 0 disables the target dot.
C.4.2
Imager Advanced Options
Important: Do not adjust the advanced options without first consulting Psion Teklogix
technical support.
Factory Defaults On Reboot
The value assigned to this parameter determines whether or not the driver will restore the
factory defaults to the imager device on the next reboot.
Note: The driver will default the imager device on a ‘clean’ reset, regardless of the value
of this parameter.
Min Scan Duration
This parameter defines the minimum amount of time in seconds that the imager will scan
when the trigger is pressed and held down without successful decode.
Note: The actual scan duration when the trigger is pressed relies on the value assigned to
“Captures Per HW Trigger”, below.
Captures Per HW Trigger
The value assigned to this parameter determines the number of captures the imager device
will take while the imager's internal hardware trigger is held down.
Note: This parameter, together with “Min Scan Duration”, determines the actual scan
duration. When the scan trigger is pressed and held down, the driver starts a timer
based on the value of “Min Scan Duration” and also sends a command to emulate
the hardware trigger. When completed, if the time has not yet expired, it will send
another command to the imager device, forcing the imager to flash again using the
value assigned to “Captures Per HW Trigger”.
C-44
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
Imager Advanced Options
Auto Exposure
Important: This parameter value should only be changed by qualified Psion Teklogix
personnel. It should be left at the default value: on.
Setting this parameter to on allows the imager to make automatic gain, integration and illumination adjustments based on ambient light before capturing the bar code. If the
adjustment is insufficient, further adjustments are made automatically before another image
is captured.
Fast Converge
Note: “Auto Exposure” must be set to on in order for this parameter to function.
Keep in mind that while this parameter can improve imager performance, “Fast
Converge” increases battery power consumption.
Setting this parameter to on speeds the “Auto Exposure” process. It allows the imager to
rapidly snap a number of bar code capture attempts while finding ideal values for gain, integration and illumination.
Max Gain, Max Integration And Max Illumination
Important: These parameter values should only be changed by qualified Psion
Teklogix personnel.
These parameters represent internal values used by the 2D imager. The “Auto Exposure” parameter automatically adjusts the Max Gain, Max Integration and Max Illumination
parameters to produce the best bar code read. Keep in mind that “Auto Exposure” must be
set to on in order for these parameter values to be automatically adjusted.
Double-tapping on any of these parameters displays an associated dialog box in which an allowable range is displayed: Max Gain – 357 to 7920, Max Integration – 0 to 65535,
Max Illumination – 0 to 7.
Decoder Timeout
The decoder is a set of algorithms that examine the image and attempt to find the bar codes,
and then turn the pixels into data that the computer can use—this process takes time. “Decoder Timeout” limits the amount of time the decoder will spend attempting to decode an
image, and forces it to stop and grab a new image, which will probably be easier to decode.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-45
Appendix C: Bar Code Settings
Imager
Code 39
Note: When decoding multiple bar codes in one image, the value assigned to ‘Decoder
Timeout’ should be increased to 200ms/extra bar code after the first.
Adaptive Windowing
“Adaptive Windowing” is an advanced technique used to speed up bar code recognition in
certain applications. This parameter automatically reduces the size of the window to the
user-programmed window size when it successfully decodes (which reduces decode time
the next time it is used), but increases it to the full size window on a failed decode.
Note: This feature assumes that you have reached an understanding about how the device
operates in your application, and that, after a learning period, operators will get
used to using the imager in one particular way. It also assumes that a trained operator will usually only have near miss scenarios.
Constant Illumination
“Constant Illumination” is used to reduce the intrusiveness of the device’s illumination on
the observer. Instead of the illumination turning on and off every time the device attempts a
decode (2-4 times per second), the illumination stays on from the time the trigger is pulled
until a decode is successful. This feature is useful in low light environments, since it will
also reduce the distraction that the illumination can have on nearby co-workers.
C.4.3
Code 39
Enabled
Set this parameter to on to enable “Code 39”.
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Check Digit Verification
When this parameter is enabled, the integrity of a “Code 39” symbol is checked to ensure
that it complies with specified algorithms.
Note: Only those “Code 39” symbols that include a MOD 43 check digit are decoded
when this parameter is enabled.
C-46
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
Code 128
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.4
Code 128
Enabled
Set this parameter to on to enable “Code 128.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.5
EAN 13
Enabled
Set this parameter to on to enable “EAN 13”.
Addendum
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides three options: Disabled, Optional and Required. Depending on the value chosen
for this parameter, an addendum is recognized or ignored.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When “Addendum” is set to Disabled, the scanner does not recognize an addendum. If this
parameter is set to Optional, the scanner searches for an addendum and if one exists,
appends it to the main bar code. When the parameter is set to Required, the scanner does not
accept the main bar code without an addendum.
Note: Setting “Addendum” to ‘Optional’ reduces performance. It should only be chosen if
at least some of the bar codes being read have addendums.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-47
Appendix C: Bar Code Settings
Imager
EAN 8
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.6
EAN 8
Enabled
Set this parameter to on to enable “EAN 8”.
Addendum
Refer to “Addendum” on page 47.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.7
UPC A
Enabled
Set this parameter to on to enable “UPC A”.
Addendum
Refer to “Addendum” on page 47.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.8
UPC E
Enabled
Set this parameter to on to enable “UPC E”.
Addendum
Refer to “Addendum” on page 47.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C-48
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
Code 93
C.4.9
Code 93
Enabled
Set this parameter to on to enable “Code 93”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.10 Codabar
Enabled
Set this parameter to on to enable “Codabar”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.11
Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
Check Digit Verification
When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies
with a specified algorithm – either USS (Uniform Symbology Specification) or OPCC (Optical Product Code Council).
Include Check
If this parameter is enabled, the check digit is transmitted along with the I 2 of 5 symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-49
Appendix C: Bar Code Settings
Imager
RSS Code (Reduced Space Symbology)
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.12
RSS Code (Reduced Space Symbology)
Enable
Setting this parameter to on enables “RSS Code” scanning capability.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.13 Composite
A composite symbol includes multi-row 2D components making it compatible with linear
and area CCD scanners along with linear and rastering laser scanners.
Enabled
Set this parameter to on to enable “Composite” bar code scanner.
Important: To successfully read this type of bar code, the two types of symbologies
included in the composite must be enabled. In addition, “Center Barcode
Only” must be disabled (see page C-43).
C.4.14
PDF-417
Enabled
Setting this parameter to on enables PDF-417 two dimensional (2D) coding.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C-50
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
Micro PDF-417
C.4.15
Micro PDF-417
Enabled
Setting this parameter to on enables “Micro PDF-417” bar code scanning. Micro PDF-417 is
a multi-row symbology that is useful for applications requiring greater area efficiency but
lower data capacity than PDF-417.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.16 2D Data Matrix
Enabled
Set this parameter to on to enable “2D Data Matrix”.
Inverse Video Mode
Enabling this parameter allows the imager to read inverse bar codes—white symbols presented on a black background.
Rectangular
Enabling this parameter allows the imager to recognize rectangular (as opposed to square)
symbols.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.17 2D QR Code
Enabled
Set this parameter to on to enable “2D QR Code”.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-51
Appendix C: Bar Code Settings
Imager
2D Maxicode
Inverse Video Mode
Enabling this parameter allows the imager to read inverse bar codes—white symbols presented on a black background.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.18 2D Maxicode
Enabled
Set this parameter to on to enable “2D Maxicode”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.19 2D Aztec
Enabled
Set this parameter to on to enable “Aztec”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.20 Postal: PlaNET
Enabled
Set this parameter to on to enable “Postal: PlaNET”.
C-52
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Imager
Postal: PostNET
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.21 Postal: PostNET
Enabled
Set this parameter to on to enable “Postal: PostNET”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.22 Postal: Australian
Enabled
Set this parameter to on to enable “Postal: Australian”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.23 Postal: Japanese
Enabled
Set this parameter to on to enable “Postal: Japanese”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-53
Appendix C: Bar Code Settings
Imager
Postal: Korean
C.4.24 Postal: Korean
Enabled
Set this parameter to on to enable “Postal: Korean”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.25 Postal: Royal
Enabled
Set this parameter to on to enable “Postal: Royal”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.26 Postal: Kix
Enabled
Set this parameter to on to enable “Postal: Kix”.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.4.27 Postal: Canadian
Enabled
Set this parameter to on to enable “Postal: Canadian”.
C-54
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
Postal: Canadian
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5
Non-Decoded Scanners
Figure C.2 Non-Decoded Scanner Options
• Tap on the Scanner drop-down menu, and choose Non-decoded.
All the available bar code symbologies for this type of scanner can be selected in this tab.
A ‘plus’ sign (+) to the left of the menu item indicates that a sub-menu of parameters is
attached.
•
•
Tap the stylus on the + sign to display the sub-menu.
To change a parameter value, double-tap on the parameter. If you need to type a value, a
dialog box is displayed in which you can type a new value. If you need to change a yes
or no value, double-tapping on the parameter toggles between yes and no.
If you’re using the keyboard:
•
•
•
Highlight the bar code you want to work with, and press the [RIGHT] arrow key to
display the sub-menu.
Use the [UP] and [DOWN] arrow keys to highlight a parameter.
To change a parameter value, press [SPACE] or the [RIGHT] arrow key. If a field
requires text entry, a text box is displayed in which you can enter the appropriate value.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-55
Appendix C: Bar Code Settings
Non-Decoded Scanners
Options
C.5.1
Options
•
Tap the stylus on the + sign next to Options to display these parameters.
Dot Time (msec)
The value selected for “Dot Time (msec)” determines (in milliseconds) how long the targeting dot remains on before the scanner switches to a normal scan sweep. When you doubletap on this parameter, a dialog box is displayed in which you can enter a value from 0 to
3000. A value of 0 (zero) disables the target dot.
Short Code
When enabled, this parameter allows scanning of short I 2 of 5 bar codes (2 characters).
When disabled, these short bar codes are rejected.
Enabling “Short Code” may reduce the robustness of the decoding since the hand-held must
decode more potential bar codes; it is therefore not recommended for general-purpose bar
codes with 4 or more characters.
Verify
The value entered for this parameter determines the number of correct additional decodes required after the initial decode, prior to a bar code being accepted. Higher values significantly
increase the time it takes to decode a bar code but also improve the reliability of the decoded
bar code.
Security
This parameter controls the tolerance for decoding edge-to-edge bar codes (Code 93, Code
128, UPC/EAN). Lower values have a lower tolerance for misreads, but they also increase
the time it takes to decode the bar code. The default value of 30 is generally a good compromise setting.
C.5.2
Code 39
Enabled
Set this parameter to on to enable “Code 39” or off to disable it.
Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
C-56
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
Code 39
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
AIAG Strip
If this parameter is enabled, the AIAG data identifier is removed from each decoded Code
39 label. The data identifier occurs in the first position next to the Code 39 start character. It
can be a single alphabetic character or a series of numeric digits followed by an alphabetic
character. This identifier defines the general category or specific use of the data contained in
the rest of the bar code.
Note: If your unit is operating with the Psion Teklogix TESS application, this parameter
should not be used in conjunction with the TESS AIAG feature. This is because the
hand-held performs the strip function before it processes the data through the AIAG
feature; if the prefix is stripped, the data is not identified as AIAG.
Error Accept
If the “Err Accept” and “AIAG Strip” parameters are enabled, all label data without an
AIAG identifier character is accepted. If the “Err Accept” parameter is disabled and the
“AIAG Strip” parameter is enabled, the label data is not accepted.
MOD Checks
This parameter allows you to choose the check digit calculated: MOD 43 Check, MOD 10
Check or None.
• Double-tap on MOD Checks to display your options.
• Tap on a check digit to highlight it, and tap on OK.
If you choose None, a check is not executed.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-57
Appendix C: Bar Code Settings
Non-Decoded Scanners
Code 128
C.5.3
Code 128
Enabled
Set this parameter to on to enable “Code 128” or off to disable it.
Include Sym
Setting “Include Sym” to on causes the group separator(s) and start code contained in this
type of bar code to be displayed on the screen.
Note: This option is available only when ‘EAN/UCC 128’ is selected.
Variations
When using Code 128, you can choose the bar code variation the scanner will recognize.
The options available are Standard, UCC 128 and EAN/UCC 128.
• Double-tap on Variations to display a dialog box listing your options.
• Tap on a variation to highlight it, and then tap on OK.
If you choose None, a check is not executed.
Standard
Enable Standard if “Code 128” is desired.
UCC 128
UCC 128 is a variation of “Code 128”.
EAN/UCC 128
To successfully scan this type of bar code, “EAN/UCC 128” must be enabled. “EAN/UCC”
bar codes include group separators and start codes.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
C-58
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
EAN 13
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.4
EAN 13
Enabled
Set this parameter to on to enable “EAN 13” or off to disable it.
Enable Bookland EAN
Setting this parameter to on allows your scanner to recognize Bookland EAN bar codes.
Include Country
If this parameter is enabled, the country code is included with the decoded bar code data.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter (see
page C-56) must be enabled.
An addendum is a separate bar code, supplementary to the main bar code. This parameter
provides three options: Disabled, Optional and Required. Depending on the value chosen for
this parameter, an addendum is recognized or ignored.
• Double-tap on Addendum to display a dialog box listing your options.
• Highlight an item, and tap on OK.
When “Addendum” is set to Disabled the scanner does not recognize an addendum. If this
parameter is set to Optional the scanner searches for an addendum and if one exists, appends
it to the main bar code. When the parameter is set to Required the scanner does not accept
the main bar code without an addendum.
Note: Setting Addendum to Optional will reduce performance. This value should only be
used if some bar codes actually have addendums.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-59
Appendix C: Bar Code Settings
Non-Decoded Scanners
EAN 8
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.5
EAN 8
Enabled
Set this parameter to on to enable “EAN 8” or off to disable it.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter (see
page C-56) must be enabled.
See “Addendum” on page C-59.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.6
UPC A
Enabled
Set this parameter to on to enable “UPC A”.
Include Number Sys
If this parameter is enabled, the number system digit is included with the decoded bar code
data.
C-60
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
UPC E
Include Check
If this parameter is enabled, the check digit will be included with the decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter (see
page C-56) must be enabled.
Refer to “Addendum” on page C-59.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.7
UPC E
Enabled
Set this parameter to on to enable “UPC E”.
Convert to UPC-A
Setting this parameter to on results in a non-standard decoding that returns 12 digits from
the 6 digit UPC E bar code.
Include Number Sys
If this parameter is enabled, the number system digit is included with the decoded bar code
data.
Include Check
When enabled, the check digit is included with the decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter (see
page C-56) must be enabled.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-61
Appendix C: Bar Code Settings
Non-Decoded Scanners
Codabar
Refer to “Addendum” on page C-59.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.8
Codabar
Enabled
Set this parameter to on to enable “Codabar” or off to disable it.
Strip Start/Stop Chars
Codabar uses the characters A, B, C, and D as start and stop characters. Thus, the first and
last digits of a Codabar message must be A, B, C, or D, and the body of the message should
not contain these characters. Setting this parameter to on strips the start and stop characters
from this bar code.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.9
Code 93
Enabled
Set this parameter to on to enable “Code 93”.
C-62
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
Code 11
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.10 Code 11
Enabled
Set this parameter to on to enable “Code 11”.
Include Check
If “Include Check” is enabled, the check digit is included with the decoded bar code data.
Check Digits
This parameter can be set to None, One Check Digit or Two Check Digits.
• Double-tap on this parameter to display a dialog box listing your options.
• Highlight the check digit you want to use, and tap on OK.
If this parameter set to One Check Digit, it is assumed that the last digit is a check digit.
If this parameter is set to Two Check Digits, it is assumed that the last two digits are check
digits.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-63
Appendix C: Bar Code Settings
Non-Decoded Scanners
Interleaved 2 of 5
C.5.11 Interleaved 2 of 5
Enabled
Set this parameter to on to enable “Interleaved 2 of 5”.
MOD 10 Check
If this parameter is enabled, the “MOD 10” check digit is calculated. This calculation is the
same as the Code 39 MOD 10 check digit.
ITF Check
If this parameter is enabled, the ITF-14/16 MOD 10 check digit is calculated.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.12 MSI Plessey
Enabled
Set this parameter to on to enable “MSI Plessey”.
One Check Digit
If this parameter is enabled, it is assumed that the last digit is a check digit.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
C-64
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Non-Decoded Scanners
Discrete 2 of 5
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C.5.13 Discrete 2 of 5
Enabled
Set this parameter to on to enable “Discrete 2 of 5”.
MOD 10 Check
If this parameter is enabled, the MOD 10 check digit is calculated. This calculation is the
same as the Code 39 MOD 10 check digit.
ITF Check
If this parameter is enabled, the ITF-14/16 MOD 10 check digit is calculated.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
C-65
Appendix C: Bar Code Settings
Non-Decoded Scanners
IATA 2 of 5
C.5.14 IATA 2 of 5
Enabled
Set this parameter to on to enable “IATA 2 of 5”.
MOD 10 Check
If this parameter is enabled, the MOD 10 check digit is calculated.
ITF Check
If this parameter is enabled, the ITF-14/16 MOD 10 check digit is calculated.
Include Check
If this parameter is enabled, the check digit is included with the decoded bar code data.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to “Length Restriction” on page C-14 for details.
Add/Remove Data
Refer to “Add/Remove Data” on page C-15 for details.
C-66
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D
APPENDIX
TEKLOGIX IMAGERS APPLET
D.1 Required Applets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
D.2 Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D.2.1 Predefined Presets . . . . . . . . . . . . . . . . . . . . . .
D.2.2 Bar Code Predefined Presets . . . . . . . . . . . . . . . . .
D.2.2.1 Bar Code Decoding Symbology Predefined Presets
D.2.3 Bar Code Decoding Camera Predefined Presets . . . . . . .
D.2.4 Image Capture Predefined Presets . . . . . . . . . . . . . .
D.3 Using The Teklogix Imagers Applet . . . . . . . . . . . . . . . . . .
D.3.1 Configuring The Image Capture Presets . . . . . . . . . . .
D.3.2 Selecting A Camera . . . . . . . . . . . . . . . . . . . . .
D.3.3 Setting The Active Preset. . . . . . . . . . . . . . . . . . .
D.3.4 Viewing A Preset . . . . . . . . . . . . . . . . . . . . . . .
D.3.5 Creating A Custom Preset . . . . . . . . . . . . . . . . . .
D.3.6 Modifying A Custom Preset . . . . . . . . . . . . . . . . .
D.3.7 Removing A Custom Preset . . . . . . . . . . . . . . . . .
D.4 Configuring The Bar Code Decoding Camera Presets . . . . . . . . .
D.4.1 Selecting A Camera . . . . . . . . . . . . . . . . . . . . .
D.4.2 Setting The Active Preset. . . . . . . . . . . . . . . . . . .
D.4.3 Viewing A Preset . . . . . . . . . . . . . . . . . . . . . . .
D.4.4 Creating A Custom Preset . . . . . . . . . . . . . . . . . .
D.4.5 Modifying A Custom Preset . . . . . . . . . . . . . . . . .
D.4.6 Removing A Custom Preset . . . . . . . . . . . . . . . . .
D.4.7 Configuring The Bar Code Decoding Symbologies . . . . .
D.4.8 Setting The Active Preset. . . . . . . . . . . . . . . . . . .
D.4.9 Viewing A Preset . . . . . . . . . . . . . . . . . . . . . . .
D.4.10 Creating A Custom Preset. . . . . . . . . . . . . . . . . .
D.4.11 Modifying A Custom Preset . . . . . . . . . . . . . . . .
D.4.12 Removing A Custom Preset. . . . . . . . . . . . . . . . .
D.4.13 Configuring Symbologies in the Teklogix Imagers Applet.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 3
. 4
. 4
. 4
. 5
. 5
. 6
. 6
. 7
. 7
. 7
. 7
. 8
. 9
. 9
10
.11
.11
.11
12
13
13
14
14
15
16
17
17
D-1
Appendix D: Teklogix Imagers Applet
D.4.14 Filter Tab – Manipulating Bar Code Data . .
D.4.14.1 Modifying A Bar Code Setting . . .
D.4.15 Translation Tab – Configuring Rules . . . .
D.4.16 Advanced Tab . . . . . . . . . . . . . . . .
D.4.16.1 File Locations For Captured Images
D.4.16.2 Configuring Triggers . . . . . . . .
D.5 Teklogix Scanners Applet . . . . . . . . . . . . . . . .
D-2
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
17
18
19
20
20
21
21
Appendix D: Teklogix Imagers Applet
Required Applets
The Teklogix Imagers applet is used to create, modify, delete, and activate imager settings
for imagers such as the SX5400. The principle uses of the applet are to decode bar codes and
to capture images. A Demonstration Application is provided to demonstrate how the imager
works. Refer to “Demo” on page 78 for details.
D.1
Required Applets
In order to configure imaging, the Manage Triggers and Teklogix Scanners applets must be
present in the Control Panel, along with the Teklogix Imagers applet.
D.2
Presets
There are two methods that can be used to configure an imager using the Teklogix Imagers
applet:
•
•
Use a predefined preset.
Create a custom preset based on a predefined preset.
Important: It is strongly recommended that a predefined preset is used
whenever possible. Each predefined preset contains a coherent
group of settings that are known to work together in the intended
environment. In almost all situations, at least one of the predefined presets results in a satisfactory outcome.
A preset is a group of exposure and image correction settings. Each preset configures the
imager for a specific purpose such as bar code decoding or image capture.
Presets also allow easier and faster configuration of the imager after power-on or resume
from suspend.
The predefined presets are generic and satisfy most user requirements. A custom preset can
be created for a specific user application, such as: include only specified bar codes, read
only a specified number of bar codes or for reading unusual media.
Every preset belongs to a preset type. The following preset types are available:
• Imaging for photo capture.
• Imaging for bar code decoding.
• Symbology selection.
At any time, only one preset of each type can be designated as the user-selected
active preset.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-3
Appendix D: Teklogix Imagers Applet
Predefined Presets
D.2.1
Predefined Presets
Predefined presets are built into the imaging software and cannot be changed. The predefined presets allow you to use the imager to perform specified tasks without having to
understand and set numerous variables. In almost all cases these predefined presets
are sufficient.
D.2.2
Bar Code Predefined Presets
These presets encompass the majority of the most popular bar codes and their subtypes. The
bar code decoding symbology predefined presets define which bar codes can be decoded.
The bar code decoding camera predefined presets determine how the bar code images
are captured
D.2.2.1
Bar Code Decoding Symbology Predefined Presets
The following presets select groups of similar bar codes for decoding.
Note: It is recommended that the default preset be used whenever possible.
Factory Default
This preset enables the decoding of frequently used bar codes.
My Default
This preset is synchronized with the Teklogix Scanners applet and contains all the symbologies selected using the Teklogix Scanner applet. For details on this synchronization see,
“Configuring Symbologies in the Teklogix Imagers Applet” on page D-17.
All
This preset enables the decoding of all bar codes that the imager can decode.
Linear
This preset enables the decoding of all the 1D symbologies that the imager can decode.
Linear and PDF417
This preset enables the decoding of all the 1D and PDF symbologies that the imager can
decode.
Matrix
This preset enables the decoding of all 2 D symbologies that the imager can decode.
D-4
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Bar Code Decoding Camera Predefined Presets
Postal
This preset enables the decoding of all the postal symbologies that the imager can decode.
D.2.3
Bar Code Decoding Camera Predefined Presets
The following presets enable successful bar code image capture in almost all conditions.
Note: It is recommended that the default preset be used whenever possible.
Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Low light
This preset is designed for very dark conditions such as inside a warehouse where the lights
are kept low, or inside an unlit truck. This preset increases either the exposure time or the
gain.
Low power
This preset minimizes the use of the flash so as to conserve the battery power on the handheld.
Glossy surface
This preset minimizes the use of the flash so as to reduce reflection. This preset is used to
read bar codes that are behind glass, or inside the plastic window of an envelope.
D.2.4
Image Capture Predefined Presets
The following presets enable successful image capture in almost all conditions.
Note: It is recommended that the default preset be used whenever possible.
Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting
(about 300 Lux).
Motion
This preset uses a shorter exposure time so as to freeze motion.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-5
Appendix D: Teklogix Imagers Applet
Using The Teklogix Imagers Applet
Low light near
This preset is designed for dark conditions, it uses a longer exposure time and includes
the flash.
D.3
Using The Teklogix Imagers Applet
D.3.1
Configuring The Image Capture Presets
To configure the image capture presets, open the dialog box as follows:
•
•
Tap on Start>Settings>Control Panel.
Tap on the Teklogix Imagers icon, and if it’s not already selected, tap on the
Imaging tab.
The following screen is displayed:
This window lists all the presets, both predefined and custom. Presets are identified
as follows:
•
D-6
Predefined presets are marked as ‘R’ read-only.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Selecting A Camera
•
•
D.3.2
Custom presets are marked as ‘RW’ read and write.
One preset – either predefined or custom – is marked as ‘A’ active.
Selecting A Camera
If your 7535 G2 has more than one built-in camera, one camera must be selected for configuration. To select a camera:
•
•
D.3.3
Tap on the Camera Presets drop-down menu to view the camera options.
Choose a camera – specifically, Front Imager which is located at the top of the unit.
Setting The Active Preset
An active preset has an A to the right. To set an active preset:
•
D.3.4
Highlight the preset, and tap on the Activate button.
Viewing A Preset
To view the parameter settings in a preset:
• Highlight a preset, and tap on the View button.
The associated preset window is displayed.
•
D.3.5
Tap on the + sign to expand the lists so that you can view the parameter settings.
Creating A Custom Preset
A new custom preset is created by modifying a preset—either a predefined preset or an existing custom preset. To create a custom preset:
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-7
Appendix D: Teklogix Imagers Applet
Modifying A Custom Preset
• Highlight a preset, and tap on the Add button.
A screen like the sample below is displayed.
• Type the name of the new preset in the dialog box.
• Tap on OK to save your changes.
The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.
D.3.6
Modifying A Custom Preset
The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
D-8
•
Highlight the custom preset, and tap on the Edit button.
•
Tap on the + symbols to expand the lists so that you can view the parameter settings.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Removing A Custom Preset
•
•
Scroll through the parameter list until you reach the parameter that you want to change.
For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click on
the parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
•
For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
• When you’ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•
D.3.7
Tap on OK to exit to the preset list and save the changes.
Removing A Custom Preset
• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•
D.4
Tap on Yes to remove the preset or No to cancel the operation.
Configuring The Bar Code Decoding Camera Presets
To configure the bar code decoding camera presets:
•
Tap on Start>Settings>Control Panel>Teklogix Imagers.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-9
Appendix D: Teklogix Imagers Applet
Selecting A Camera
•
Tap on the Barcoding tab.
This window lists all the presets, both predefined and the custom. Presets are identified
as follows:
•
•
•
Predefined presets are marked as read-only. For a description, review “Predefined Presets” on page D-4.
Custom presets are marked as read and write.
One preset – either predefined or custom – is marked as active.
Note: The top portion of the window displays the bar code decoding camera presets.
The top port of the window displays the bar code decoding camera presets.
D.4.1
Selecting A Camera
If your 7535 G2 has more than one built-in camera, one camera must be selected for configuration. To select a camera:
•
•
D-10
Tap on the Camera Presets drop-down menu to view the camera options.
Choose a camera – specifically, Front Imager which is located at the top of the unit.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Setting The Active Preset
D.4.2
Setting The Active Preset
An active preset has an A to the right; in Figure D.1 on page 14, the active preset is Default.
To set an active preset:
•
D.4.3
Highlight the preset, and tap on the Activate button.
Viewing A Preset
To view the parameter settings in a preset:
• Highlight a preset, and tap on the View button.
The associated preset window is displayed.
•
D.4.4
Tap on the + sign to expand one of the lists so that you can view the parameter settings.
Creating A Custom Preset
A new custom preset is created by modifying a preset – either a predefined preset or an existing custom preset. To create a custom preset:
•
Highlight a preset, and tap on the Add button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-11
Appendix D: Teklogix Imagers Applet
Modifying A Custom Preset
A screen like the sample following is displayed.
• Type the name of the new preset in the dialog box.
• Tap on OK to save your changes.
The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.
D.4.5
Modifying A Custom Preset
The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
D-12
•
Highlight the custom preset, and tap on the Edit button.
•
•
Tap on the + symbols to expand the lists and view the parameter settings.
Scroll through the parameter list until you reach the parameter that you want to change.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Removing A Custom Preset
•
For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
•
For a parameter that toggles between two values such as on or off and enabled or
disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
• When you’ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•
D.4.6
Tap on OK to exit to the preset list and save the changes.
Removing A Custom Preset
• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•
D.4.7
Tap on Yes to remove the preset or No to cancel the operation.
Configuring The Bar Code Decoding Symbologies
To configure the bar code decoding camera presets:
•
Tap on Start>Settings>Control Panel>Teklogix Imagers.
•
Tap on the Barcoding tab.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-13
Appendix D: Teklogix Imagers Applet
Setting The Active Preset
Figure D.1 Viewing Bar Code Decoding Symbologies
D.4.8
Setting The Active Preset
An active preset has an A to the right; in Figure D.1 on page 14, the active preset is Default.
To set an active preset:
•
D.4.9
Highlight the preset, and tap on the Activate button.
Viewing A Preset
To view the parameter settings in a preset:
•
D-14
Highlight a preset, and tap on the View button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Creating A Custom Preset
The associated preset window is displayed.
•
Tap on the + sign to expand one of the lists so that you can view the parameter settings.
D.4.10 Creating A Custom Preset
A new custom preset is created by modifying a preset – either a predefined preset or an existing custom preset. To create a custom preset:
• Highlight a preset, and tap on the Add button.
A screen like the sample following is displayed.
• Type the name of the new preset in the dialog box.
• Tap on OK to save your changes.
The preset list is displayed; the new custom preset appears at the end of the list. It is marked
as read and write.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-15
Appendix D: Teklogix Imagers Applet
Modifying A Custom Preset
D.4.11 Modifying A Custom Preset
The parameter values in a custom preset can be modified. It is recommended that very few
changes be made to a custom preset. To ensure that it will work reliably, it should be as close
as possible to the original predefined preset. To change a parameter value:
•
Highlight the custom preset, and tap on the Edit button.
•
•
•
Tap on the + symbols to expand the lists and view the parameter settings.
Scroll through the parameter list until you reach the parameter that you want to change.
For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
•
D-16
For a parameter that toggles between two values such as on or off and enabled or
disabled:
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Removing A Custom Preset
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
• When you’ve completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•
Tap on OK to exit to the preset list and save the changes.
D.4.12 Removing A Custom Preset
• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•
Tap on Yes to remove the preset or No to cancel the operation.
D.4.13 Configuring Symbologies in the Teklogix Imagers Applet
All changes made in the Symbologies Presets in the Imagers Applet are also made in the
Scanners Applet. The Scanner Applet will reflect the settings of whichever Symbologies
Preset is made active in the Imager Applet.
Configuring Symbologies In The Teklogix Scanners Applet
When a symbology is enabled or configured using the Teklogix Scanners applet, the
changes are also made in the My Default preset. My Default automatically becomes the
active bar code symbology preset.
None of the other bar code decoding predefined presets is changed.
Configuring Symbologies In The My Default Preset
When My Default is the active preset
In this case, the changes to the symbology configuration are also made in the Teklogix Scanners applet.
When My Default is not the active preset
In this case, the changes to the symbology configuration are not made in the Teklogix Scanners applet.
D.4.14 Filter Tab – Manipulating Bar Code Data
To configure rules for manipulating bar code data:
•
Tap on Start>Settings>Control Panel.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-17
Appendix D: Teklogix Imagers Applet
Filter Tab – Manipulating Bar Code Data
•
Tap on the Teklogix Imagers icon, and then tap on the Filter tab.
D.4.14.1 Modifying A Bar Code Setting
The rules for manipulating data from selected bar code symbologies can be modified. To
change the settings for a symbology:
•
•
•
Tap on the + symbols to expand the lists and view the parameter settings.
Scroll through the parameter list until you reach the parameter that you want to change.
For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click the
parameter.
- An associated dialog box containing the valid range of values for the parameter and
the current setting like the sample screen following is displayed.
- Type a value in the field provided.
D-18
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Translation Tab – Configuring Rules
•
For a parameter that takes a single character:
- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. The following screen is displayed:
•
When you’ve completed your edits, tap on OK.
D.4.15 Translation Tab – Configuring Rules
Translation rules enable the automatic processing of bar code data. Up to 10 cases can be defined, each consisting of up to 10 sequential rules.
Note: Changes made to the translations configuration using the Teklogix Scanner Control Panel program are synchronized with changes made here. Changes made in
either place affect both translation tables.
• Tap on Start>Settings>Control Panel.
• Tap on the Teklogix Imagers icon, and then tap on the Translations tab.
For instructions on adding, editing, and removing translation rules, refer to “Translations”
on page 143.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-19
Appendix D: Teklogix Imagers Applet
Advanced Tab
D.4.16 Advanced Tab
D.4.16.1 File Locations For Captured Images
To configure the location for saved images, open the dialog box as follows:
•
•
Tap on Start>Settings>Control Panel.
Tap on the Teklogix Imagers icon, and then tap on the Advanced tab.
To define the location where imager files will be stored:
D-20
•
Tap on the File Location button.
•
•
Select the folder name and file Type. Then enter the file Name.
When you have completed all the changes, tap on the OK button.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix D: Teklogix Imagers Applet
Teklogix Scanners Applet
D.4.16.2 Configuring Triggers
Viewing The Trigger Configuration
The trigger on the 7535 G2 is configured using the Manage Triggers applet. The Teklogix
Imagers applet provides a shortcut to the Manage Triggers applet.
•
•
In the Advanced tab, tap on the Trigger Control button.
To view all the triggers and the hardware devices that are configured to use them, tap in
the checkbox next to Show all modules.
Adding, Editing And Removing Triggers
For instruction about adding, editing and removing triggers, refer to “Manage Triggers” on
page 114.
D.5
Teklogix Scanners Applet
The bar code symbologies that are to be read by the imager can be enabled using the Teklogix Scanners applet. Tapping on Start>Settings>Control Panel followed by the Teklogix
Scanners icon displays this applet. For a list of bar code symbologies, see Appendix C:
“Bar Code Settings”.
Warning: Changes made to the symbology configuration using the Teklogix Scanner
applet are synchronized only with the My Defaults bar code symbology
preset. For details, refer to “Configuring Symbologies in the Teklogix
Imagers Applet” on page D-17.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
D-21
INDEX
A
Accepted Start Char C-28
accessories
bar code readers, connecting 179
hand strap 16
picker cradle 193
pistol grip 18
Active Conn Tab 134
ActiveSync
ASync profile 129
Adaptive Windowing C-46
adaptor cables, tether 198
Addendum C-32, C-47, C-48, C-61, C-59,
C-60
Addendum Add-on 2 C-33
Addendum Add-on 5 C-33
Addendum Security C-33
Add Remove Data (bar code scanning)
C-15
Prefix C-15
Strip Leading C-15
Suffix Char C-15
Ad Hoc network 23
Advanced (wireless connection) 27
AIAG
AIAG Strip C-57
AIAG Strip C-57
Aim Duration C-8
aiming dot, duration of C-8, C-44, C-56
All
Predefined preset D-4
ALT Key 45
appearance (display colour scheme) 99
appending to bar codes
characters 142
App Launch Keys 94
approvals, 7535 G2 (including scanner)
204
arrow keys
moving the cursor 45
ASCII
Full Ascii C-28, C-56
audio indicators
adjusting volume 57
description of beep conditions 57
volume adjustment using the BLUE
key 57
Authentication, Bluetooth Controls 130
authentication, network (Shared Mode) 23
Auto Exposure (Imager) C-45
B
background image (display scheme) 98
backlight
display 99
intensity 50
keyboard 50
backup profile, creating (Total Recall) 165
backup profile, restoring (Total Recall)
169
Bad Scan Beep 143
Bar code
Decoding symbology predefined
presets D-4
bar code
appending to 142
connecting bar code reader 179
decodes required C-56
decoding edge-to-edge C-56
displaying type of bar code 142
external bar code reader 179
parameters 139, C-5
Security C-56
symbologies
Codabar C-20, C-34, C-49, C-62
Code 11 C-36, C-63
Code 128 C-15, C-47, C-58
Code 39 C-46, C-56–C-57
Code 93 C-19, C-33, C-49, C-62
Discrete 2 of 5 C-23, C-38, C-65
EAN 13 C-16, C-30, C-47, C-59
EAN 8 C-16, C-31, C-48, C-60
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
I
Index
IATA 2 of 5 C-66
Interleaved 2 of 5 C-22, C-36, C-49,
C-64
Matrix 2 of 5 C-37
MSI Plessey C-21, C-35, C-64
UPC A C-17, C-31, C-48, C-60
UPC E C-17, C-32, C-48, C-61
Translation tab 143
bar code reader
applications 206
external (specs) 206
external scanner, operation of 179
integrated scanner, operation of 58
internal or integrated 206
Barcodes Must Decode C-43
batteries
capacity dialog box 119
charge, time required 180
charge cycles 180
chargers 40
charging 14
gauge 56
installing 39
installing in 7535 G2 15
removing 39
run time, maximizing 41
safety precautions xxiii
specifications 221
battery
Advanced dialog box 122
Built In Devices dialog box 123
Devices dialog box 123
estimated battery backup time 120
power saving suspend dialog box 119
Suspend Threshold dialog box 120
battery charger
safety instructions xxv–xxvi
battery pack 180
battery safety xxiii–xxvi
battery See also batteries 180
Baud 147, 148, 149, 150
beeper
adjusting volume 57
description of beep conditions 57
volume adjustment using the BLUE
key 57
Bi-Direction Redundancy C-10
BKSP (DEL Key) 45
Bluetooth devices, pairing 128
II
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Bluetooth radio
changing device name 134
Connect, headset 131
device service profiles 129
ISM band 126
Open Audio, headset 131
PINs for devices 130
radio configuration 126–136
specifications 205
Bluetooth radio
peripherals 192
Bluetooth setup 126
BooSt
console (cold reset) 35
Bright For (backlight) 100
BSP, Bluetooth Controls 135
C
cable diagrams A-1
cables, tether adaptor 198
calibrating (touchscreen) 51, 124
Captures Per HW Trigger C-44
Center Barcode Only (Imager) C-43
CH, Bluetooth Controls 129
changing password (Start Menu security)
77
charger
descriptions of 40
safety instructions xxv–xxvi
charging (battery) 14
Check Digit C-63
check digit C-21, C-59, C-61, C-64, C-65
Check Digit, One C-21, C-64
Check Digits (MSI Plessey) C-21
Check Digit Verification C-13, C-14,
C-28, C-30, C-35, C-36, C-38, C-46
Check Digit Verification (Codabar)
C-34
Check Digit Verification (I 2 of 5) C-22,
C-49
Click Data (scanner double-click) 142
Click Time (scanner double-click) 141
CLSI Editing C-20
CLSI Library System C-34
Codabar C-20, C-34, C-49, C-62
Codabar C-20
Codablock C-42
Code 11 C-36, C-63
Code 128 C-47, C-58
Index
Code 128 C-15, C-29
Code 128 Emulation C-25, C-41
Code 32, Convert To C-12
Code 32 Prefix C-13
Code 39 C-56–C-57
Code 39 C-12, C-27
Code 93 C-19, C-33, C-49, C-62
Code 93 C-19
cold reset 35
Cold Reset (Shutdown menu) 83
COM, Bluetooth Controls 135
Command Prompt 78
Communities 153
Composite C-24, C-40, C-50
configuring IEEE 802.11g radio 19
Connect, Bluetooth headset 131
connection list table, Bluetooth Controls
134
Console Port (COM3) settings 148
Console Port settings
Baud 148, 149, 150
Data Bits 149, 150
Parity 149, 150
Stop Bits 149, 150
Constant Illumination C-46
Contact 152
Continuous Scan Mode C-9, C-26, C-43
contrast, adjusting 51
contrast, adjusting display 51
Control Panel
App Launch Keys icon 94
Predefined presets D-4
control panel
accessing 89
applications 94
Display Properties 98
icons 90
keyboard properties 103
power management properties 118
stylus properties 124
Conv. UPC-E To UPC-A C-18
Conv. UPC-E1 To UPC-A C-18
Convert To Code 32 C-12
Convert To EAN 13 C-22, C-31
Convert To UPC -A C-32
Convert to UPC-A C-61
country code C-59
cradle See also Picker cradle 193
CTRL Key 45
Custom preset D-3
cycle tasks 80
D
data
entering
with a bar code reader 179
Data Bits 147, 149, 150
decoded (internal) scanner parameters C-8
decoded Intermec (ISCP) parameters C-26
decoded scanners C-55
Decode Performance C-14, C-16
Decode Performance Level C-14, C-16
Decoder Timeout C-45
decode zones (internal scanners) 210
decoding bar codes
decodes required C-56
Security C-56
2-D scanner 210
Decoding symbology
Predefined symbology D-4
Default
Predefined preset D-4, D-5
Default identifier
Preset group D-3
DEL (BKSP) Key 45
Delete Char Set ECIs C-12
Demo
Imager 78
Scanner 78
Signature 78
desktop connection, remote 89
Device Name, changing 134
dialog box, using 83
Diff Read Timeout C-27
digit
check digit C-21, C-59, C-61, C-64,
C-65
number system C-60, C-61
Dim For (backlight) 100
Discrete 2 of 5 C-23, C-38, C-65
Discrete 2 of 5 C-23
dismounting partitions 161
display
appearance (colour scheme) 99
background (image) 98
backlight 99
backlight, adjusting 50
contrast, adjusting 51
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
III
Index
contrast (control panel) 101
Display Properties 98
display contrast, adjusting 51
Display Properties 98
docking device icons 57
docking station
uploading data using 64
Dot Time C-8, C-44, C-56
double-click
appending characters to a decoded
bar code 142
scanner trigger 141
Double-Click, Manage Triggers menu 115
Double-Tap (stylus settings) 124
DSSS, 802.11a/g/b radio 204
DSSS, 802.11g/b radio 204
DUN service, Bluetooth 129
F
E
Glossy surface
Predefined preset D-5
Good Scan Beep 143
Group, preset D-3
GS1-128 C-29
GS1-128 GS1 US C-15
GS1-128 Identifier C-29
GTIN Compliant C-29, C-33
EAN/UCC 128 C-58
EAN 13 C-16, C-30, C-47, C-59
EAN 8 C-16, C-31, C-48, C-60
EAN-8 Zero Extend C-16
EAP (Extensible Authentication Protocol)
24
ECI Decoder C-12
Enable Bookland (UPC-EAN) C-18
Enable Bookland EAN C-59
Enable CC-AB C-24, C-40
Enable CC-C C-24, C-40
Enable Plessy C-35
Enable RSS Expanded C-24, C-39
Enable RSS Limited C-23, C-39
Enable RSS-14 C-23, C-39
Enable SNMP 153
Enable TLC-39 C-24
Encryption, Bluetooth Controls 130
Encryption, 802.11 wireless properties 23
Error Accept C-57
Error Handler (Psion Teklogix) 162
ErrorLogInfo, Teklogix Error Handling
Service 163
Error Reporting 136
ESC Key 46
EV15 1D imager scanner specifications
206
Extensible Authentication Protocol (EAP)
24
IV
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Factory Defaults On Reboot C-44
Fast Converge (Imager) C-45
features, 7535 G2 7
Field Size C-14
FNC1 Conversion C-29
formatting
entire memory card 158
partitions 161
Full Ascii C-28, C-56
Full ASCII, Code 39 imager bar code C-46
Full ASCII (decoded scanner) C-14
Function Keys
36-key keyboard 46
58-key keyboard 46
G
H
hand strap, installing 16
Headset, Bluetooth Controls 131
headsets, pairing (Bluetooth) 128
I
IATA 2 of 5 C-66
Identifier
Default preset group D-3
IEEE radio, configuring 19
Imager
EV15 specifications 206
SX5400 specifications 215
imager (2D) scanner, scanning 61
imager parameters C-42
Include Check C-61, C-64, C-66, C-59
Include Check (Discrete 2 of 5 symbology)
C-65
Include Check (Interleaved 2 of 5
symbology) C-64
Include Check (I 2 of 5) C-49
Include Chk C-47, C-57, C-61, C-63
Include Country C-59
Index
Include Number Sys C-60, C-61
Include Sym (Code 128) C-58
indicators
battery gauge 56
docking devices 57
LED functions 52
modifier keys 55
onscreen 54
scanner message 60, 61
security level 57
task bar 73
tethered device 56
802.11radio signal quality 56
Infrastructure network 23
input
bar code reader 179
Input Panel (control panel) 91
installation
hand strap 16
pistol grip 18
integrated scanner option 58
Intensity (7035 backlighting) 100, 105
Interleaved 2 of 5 C-22, C-36, C-49, C-64
Intermediate Driver Support, TweakIt
menu 172
Internet Explorer 78
Inverse Video Mode C-51, C-52
IP address, assigning 25
IP address, assigning (Summit) 28
ISBN Conversion C-30
ISBT Concat Any Pair C-30
ISBT Concat Transmit C-29
ISBT 128 C-15, C-29
ISM band, Bluetooth radio 126
ITF Check (Discrete 2 of 5 symbology)
C-65
ITF Check (IATA 2 of 5 symbology) C-66
ITF Check (I 2 of 5 symbology) C-64
I 2 of 5
Short Code C-56
K
keyboard
key repeat 103, 105
one shot mode 106
36-key keyboard 48
58-key 48
keyboard backlight 50
keyboard keys 43
ALT 45
arrow keys 45
BKSP 45
CTRL 45
DEL 45
ESC 46
function keys, accessing 46
macro keys 47, 107
modifiers 44
navigating using the keyboard 69
one shot mode 106
SCAN 46
SHIFT 45
SPACE 46
TAB 45
Keyboard Properties 103, 105
backlight 105
one shot mode 106
Key Index, assigning 24
Key Repeat tab 104
keys
alpha keys, 36-key keyboard 48
L
LANAccessUsingPPP service, Bluetooth
129
Laser On Time C-8, C-26
LED
charge 53
functions 52
receive 53
scan 54
transmit 53
Length Mode C-34, C-37, C-38
Length Restriction (bar code scanning)
C-14
Field Size C-14
Maximum Size C-15
Minimum Size C-15
Linear
Predefined preset D-4
Linear and PDF
Predefined preset D-4
Linear Decode C-19
Linear Security Level C-10
Linear Transmission only (Decoded
Composite) C-40
Linear Transmission only (TLC-39)
C-40
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
V
Index
Lithium-ion batteries
installing 39
removing 39
Location 152
Lock Sequence 113
Low light
Predefined preset D-5
Low light near
Predefined preset D-6
Low power
Predefined preset D-5
Low Power Timeout C-9, C-27
L1, Set Length C-13
L2, Set Length C-13
M
Macro keys
accessing 47
executing a macro 108
Macros menu, accessing 107
recording and saving 107
36-key keyboard 47
58-key keyboard 47
maintenance 64
Manage Triggers 114
Matrix
Predefined preset D-4
Matrix 2 of 5 C-37
Max Gain (Imager) C-45
Max Illumination (Imager) C-45
Maximum Size C-15
Max Integration (Imager) C-45
Max Number Barcodes C-43
memory card
creating partitions 159
formatting entire 158
formatting partition 161
messages
Scan Indicator 142
scanner warning message 142
Scan Result 142
Micro PDF-417 C-25, C-41, C-51
Microsoft® ActiveSync® 34
Minimum Cancel Time C-9, C-26
Minimum Length C-28, C-30, C-33,
C-35, C-36, C-37, C-39
Minimum Size C-15
Min Scan Duration C-44
modifier keys 44
VI
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
locking 44
One Shot Mode 106
unlocking 44
Mod 10 Check C-57, C-66
Mod 10 Check (Discrete 2 of 5
symbology) C-65
Mod 10 Check (I 2 of 5 symbology) C-64
Mod 43 Check C-57
Motion
Predefined preset D-5
mounting partitions 162
MSI Plessey C-21, C-35, C-64
N
Name 153
name servers, assigning 26
name servers, assigning (Summit) 30
NetLog, Teklogix Error Handling Service
163
network
Ad Hoc 23
connection, monitoring 63
infrastructure 23
network authentication (Shared Mode) 23
Network Key, assigning 24
NOTIS Editing C-20
NQuerty Retry, Bluetooth Controls 135
number system digit C-60, C-61
O
Off & On buttons 14, 43
On & Off button 14, 43
One Check Digit C-21, C-64
one dimensional internal scanner 60
One Shot Mode 106
ON For 105
ON Threshold 100, 105
Open Audio, Bluetooth headset 131
P
pairing Bluetooth devices 128
Parameter Scanning C-9, C-27, C-28,
C-29, C-30, C-33, C-35, C-36, C-37,
C-39
Parity 148, 149, 150
partitions
creating 159
deleting 161
dismounting 161
Index
formatting 161
management 160
mounting 162
PDF and linear
Predefined preset D-4
PDF internal scanner
scanning
PDF internal 60
PDF-417 C-24, C-41, C-50
PDM (portable docking module) 190–192
picker cradle 193
installing cable 194
powered 10-55 VDC 193
powered 12 VDC 193
unpowered 193
picker cradle See also Picker Cradle 193
PIN, Bluetooth Controls 129
pinouts A-1
PINs, Bluetooth devices 130
pistol grip, installing 18
Plessy Transmit Check Digit C-35
pocket PC compatibility 89
portable docking module (PDM) 190–192
port pinouts A-1
Port Prefix, Bluetooth Controls 135
Port Replicator Port A (COM5) settings
150
Port Replicator Tether (COM6) settings
149
ports
internal scanner 205
ports parameters 146
Postal
Predefined preset D-5
Postal
Canadian C-54
Kix C-54
PlaNET C-52
PostNET C-53
Royal C-54
Power Management Properties 118
Advanced 122
battery capacity 119
Built In Devices 123
Devices 123
suspend, power saving 119
Suspend Threshold 120
Power Mode Decoded (Internal)
Scanner C-9
PowerScan® LR and XLR specs 216
PowerScan® standard range specs 219
Power Source 119
power up 14
Predefined preset D-3
All D-4
Default D-4, D-5
Glossy surface D-5
Linear D-4
Linear and PDF D-4
Low light D-5
Low light near D-6
Low power D-5
Matrix D-4
Motion D-5
Postal D-5
Predefined presets D-4
preferred networks 27
Prefix C-12, C-15
Preset
Custom D-3
Group D-3
Group default identifier D-3
Predefined D-3, D-4
Preset group
Default identifier D-3
Printer (serial service), Bluetooth 129
profile, creating backup 165
profile, restoring backup 169
Programs
Command Prompt 78
Internet Explorer 78
Remote Desktop Connection 78
Windows Explorer 78
punctuation marks, accessing (SHIFT
Key) 45
R
radio
adding new network connection 22
advanced settings of 27
Bluetooth 126–136
Bluetooth specifications 205
Configure button 21
configuring 19
adding a new network connection
22
Ad Hoc 23
authentication, network 23
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
VII
Index
Configure button 21
Connect button 21
EAP (Extensible Authentication
Protocol) 24
Infrastructure 23
Key Index 24
Key Index, assigning 24
network authentication 23
Network Key 24
Network Key, assigning 24
wireless information 21
wireless properties 22
802.1X authentication 24
Connect button 21
IP address, assigning 25
IP address (Summit), assigning 28
name servers 26
name servers (Summit) 30
preferred networks, arranging 27
RA2041 radio specifications 204
RA2043 radio specifications 204
wireless connection, setting up 19
802.11a/g/b Direct Sequence SS 204
802.11g/b Direct Sequence SS 204
802.11signal quality 56
Raster Expand Rate C-11
Raster Height C-11
RA2041 radio specifications 204
RA2043 radio specifications 204
RD7950 UHF RFID Reader 58, 62, 179
Reading Range C-28, C-30, C-33, C-36
recalibrating (touchscreen) 51, 124
receive LED 53
Rectangular C-51
remote connect 89
Remote Desktop Connection 78
Repeat Delay (between key repeats) 104
Repeat Rate (of key repeats) 105
Repeat tab (key repeat settings) 104
resetting the 7535 G2
cold reset 35
warm reset 35
RFID
applications 206
Rights 154
RSS Code C-23, C-39, C-50
Run (Start Menu) 82
VIII
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
S
safety instructions
battery charger xxv–xxvi
scanner 58
safety warning, scanner 58
Same Read Timeout C-27
Same Read Validate C-27
Scan Angle C-11
Scan Data Format C-11
Scan Indicator 142
SCAN Key 46
Scan Log File 143
scanner
Addendum C-59, C-60
Aim Duration C-8
aiming (target) dot duration C-8, C-44,
C-56
aiming dot duration C-8
appending data 142
Bad Scan Beep 143
bar code, appending data to 142
bar code applications 206
Barcodes Must Decode C-43
Bi-Direction Redundancy C-10
Center Barcode Only (Imager) C-43
Check Digit C-63
check digit C-59
Check Digits (MSI Plessey) C-21
Check Digit Verification C-13, C-22,
C-46
Click Data (appending data) 142
Click Time (double-click) 141
CLSI Editing C-20
Codabar C-20
Code 128 C-15
Code 128 Emulation C-25, C-41
Code 32 Prefix C-13
Code 93 C-19
Composite C-24, C-50
Continuous Scan Mode C-9, C-26,
C-43
Conv. UPC-E To UPC-A C-18
Conv. UPC-E1 To UPC-A C-18
Convert To Code 32 C-12
Convert To EAN 13 C-22
country code C-59
decoded C-55
decoded (internal) C-8
decoded Intermec (ISCP) C-26
Index
Decode Perf. Level C-14, C-16
Decode Performance C-14, C-16
Delete Char Set ECIs C-12
Discrete 2 of 5 C-23
Dot Time C-8, C-44
double-click 141
EAN-8 Zero Extend C-16
ECI Decoder C-12
Enable Bookland C-18
Enable Bookland EAN C-59
Enable CC-AB C-24
Enable CC-C C-24
Enable RSS Expanded C-39
Enable RSS Limited C-39
Enable RSS-14 C-39
Enable TLC-39 C-24
Factory Defaults On Reboot C-44
Full ASCII C-14
Good Scan Beep 143
imager C-42
Include Check C-61, C-64
Include Check Digit C-65
Include Number Sys C-60, C-61
integrated 206
Inverse Video Mode C-51, C-52
ISBN Conversion C-30
Laser On Time C-8, C-26
Linear Decode C-19
Linear Security Level C-10
Low Power Timeout C-9, C-27
Max Number Barcodes C-43
Micro PDF-417 C-25, C-41, C-51
Minimum Cancel Time C-9, C-26
NOTIS Editing C-20
One Check Digit C-21, C-64
one dimensional (1D) internal scanner
60
Parameter Scanning C-9, C-27
PDF internal scanner dimensional (1D)
60
PDF-417 C-24, C-41
ports parameters 146
Console Port (COM3) 148
Port Replicator Port A (COM5) 150
Port Replicator Tether (COM6) 149
Tether Port (COM1) 147
Postal
PlaNET C-52
PostNET C-53
Royal C-54
PowerScan® LR and XLR specs 216
PowerScan® standard range specs 219
Prefix C-12
Raster Expand Rate C-11
Raster Height C-11
rectangular C-51
RSS Code C-23, C-39, C-50
safety warnings 58
Scan Data Format C-11
Scan Indicator 142
Scan Log File 143
Scanning Mode C-11
Scan Result Time 142
Security C-56
Security Level C-19
Set Length L1 C-13
Set Length L2 C-13
SE 1200 Advanced LR specs 209
SE 1200 HP specs 207
SE 1200 LR specs 207
SE 1524 ER specs 212
SE 2223 PDF specs 209
Short Code C-56
Soft Scan Timeout 143
specifications, external 216
specifications, internal 206
Strip Start/Stop Chars C-62
Suffix C-12
Supp. Redundancy C-19
Supplementals C-18
target dot duration C-8, C-44, C-56
techniques (scanning) 59
TekImager Enabled C-42
Transmit Check Digit C-14, C-22,
C-31
Transmit Check Digit (MSI Plessey)
C-21
Transmit Code 1D Char C-11, C-57,
C-58, C-60, C-61, C-62, C-63, C-64,
C-65, C-66
Trioptic Code 39, Enable C-12
troubleshooting tips 60
two dimensional (2D) imager scanner
61
UPC-A Check Digit C-17
UPC-EANI C-18
UPC-E Check Digit C-17
UPC-E Preamble C-18
UPC-E1 Check Digit C-17
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
IX
Index
UPC-E1 Preamble C-18
Verify C-56
warning message 142
Window Height C-43
Window Width C-43
2D Aztec C-52
2D Data Matrix C-51
2D Maxicode C-52
2D QR Code C-51
2D UPC Half Block Stitching C-19
scanning
appending characters 142
Check Digit Verification (I 2 of 5)
C-49
Code 128 C-29
Code 39 C-12, C-27
Composite C-40
decode zones 210
Enable CC-AB C-40
Enable CC-C C-40
Enable RSS Expanded C-24
Enable RSS Limited C-23
Enable RSS-14 C-23
Linear Transmission only (Decoded
Composite) C-40
Linear Transmission only (TLC-39)
C-40
safety instructions 58
Security Level (TLC-39) C-40
symbologies 139, C-5
TLC-39 C-40
Translations tab 143
UPC-A Preamble C-17
UPC-EAN Shared Settings C-32
1D internal 60
Scanning Mode C-11
Scan Result 142
Scan Result Time 142
screen
stylus, using to navigate 69
touch pen, using 69
Windows CE, navigating 69
SCU (Summit Client Utility) 28, B-1
configuring 31
Diags (Diagnostics) Tab B-9
EAP Credentials B-7
EAP Types B-6, B-7
Global Tab B-10
IP, assigning 28
Main Tab 31, B-3
X
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Profile Tab B-4
security B-6
Status tab B-9
ThirdPartyConfig B-8
Windows Zero Config (WZC) B-8
WLAN, connecting to 28
Security C-56
Security Level C-19
Security Level (TLC-39) C-40
security level icon 57
Security Settings 76
changing password 77
configuring taskbar 77
level 76
Supervisor 76
Teklogix 76
User 76
Servers, Bluetooth Controls 132
Services, Bluetooth Controls 129
Set Length L1 C-13
Set Length L2 C-13
Set PIN, Bluetooth Controls 130
Settings
Control Panel 81
Network and Dial-up connections 81
Run 81
Taskbar and Start Menu 81
SE 1200 Advanced LR specs 209
SE 1200 HP specs 207
SE 1200 LR specs 207
SE 1524 ER specs 212
SE 2223 PDF specs 209
Shared Mode (network authentication) 23
SHIFT Key 45
Short Code C-56
Shutdown
Cold Reset 83
Suspend 83
Warm Reset 83
Shutdown (Start Menu) 82
signal quality, 802.11 56
Simple Network Management (SNMP)
See SNMP 151
SIP (Soft Input Panel 91
Sled See picker cradle. 193
SNMP (Simple Network Management
Protocol) 151
Communities 153
Contact 152
Index
Enable SNMP 153
Location 152
Name 153
Rights 154
Soft Input Panel (SIP) 91
Soft Scan Timeout 143
SPACE Key 46
specifications
battery 221
EV15 1D imager 206
scanner, external 216
scanner, internal 206
SX5400 imager 215
specifications, 75235 G2 201
Standard (Code 128) C-58
Start/Stop Transmit C-28, C-34
Start Menu 75
cycle tasks 80
desktop 76
programs 78
Run 82
Security 76
Settings 81
Shutdown 82
system tray 79
task manager 80
Stop Bits 148, 149, 150
Strip Leading C-15
Strip Start/Stop Chars C-62
Strip Trailing C-15
stylus (touch pen), using 69
Stylus Properties 124
Double-tap (stylus sensitivity) 124
Suffix C-12
Suffix Char C-15
Summit Client Utility (SCU) 28, B-1
Supervisor security level 76
Supp. Redundancy (Code 128) C-19
Supplementals (UPC-EAN) C-18
Surface
Glossy D-5
Suspend (Shutdown menu) 83
Suspend Timeout 120
SX5400 imager specifications 215
symbologies
IATA 2 of 5 C-66
symbologies, bar code 139, C-5
displaying type of bar code 142
system tray 79
T
TAB Key 45
target dot, duration of C-8, C-44, C-56
taskbar
onscreen indicators
battery gauge 56
docking devices 57
modifier keys 55
security level 57
tethered device 56
802.11 radio signal quality 56
using 73
task manager 80
TekImager Enabled C-42
Teklogix Error Handling Service 162
Teklogix Imagers applet D-1
Teklogix Imagers settings 164
Teklogix security level 76
TekTerm application 89
Telepen C-38
tether adaptor cables 198
tethered device
connecting and disconnecting 62
taskbar icons 56
Tether Port (COM1) settings 147
Tether Port settings
Baud 147
Data Bits 147
Parity 148
Stop Bits 148
threshold, setting (backlight) 100, 105
TKIP (Temporal Key Integrity Protocol)
23
TLC-39 C-40
Total Recall
backup profile, creating 165
backup profile, restoring 169
touch pen, using 69
touchscreen
recalibration 51, 124
stylus, using 69
touch pen, using 69
Translations parameters (bar codes) 143
Transmit Check Digit C-28, C-31, C-32,
C-34, C-35, C-36, C-37, C-38
Transmit Check Digit (I 2 of 5) C-22
Transmit Check Digit (MSI Plessey)
C-21
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
XI
Index
Transmit Code 1D Char C-11, C-57,
C-58, C-60, C-61, C-62, C-63, C-64,
C-65, C-66
transmit LED 53
Transmit Number System C-31, C-32
trigger, double-click 141
trigger mappings 115
Trigger-Press Type, Manage Triggers
menu 117
triggers, configuring 114
Trioptic Code 39, Enable C-12
troubleshooting tips (scanning) 60
turning 7535 G2 off 14
turning 7535 G2 on 14
TweakIT
Advanced Services 171
Radio Features 173
TweakIT Settings
Advanced Interface and Network
170
U
UCC 128(Code 128) C-58
UPC A C-17, C-31, C-48, C-60
UPC-A Check Digit C-17
UPC-A Preamble C-17
UPC E C-17, C-32, C-48, C-61
UPC-EAN C-18
UPC-EAN Shared Settings C-32
UPC-E Check Digit C-17
UPC-E Preamble C-18
UPC-E1 Check Digit C-17
UPC-E1 Preamble C-18
UPC Half Block Stitching, 2D C-19
User security level 76
V
Variations (Code 128) C-58
Verify C-56
W
warm reset 35
Warm Reset (Shutdown menu) 83
warnings 142
WEP (Wired-Equivalent Privacy) 23
Window Height C-43
Windows® Start Menu See Start Menu 75
Windows CE
dialog box 83
XII
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
files, folders, & programs, working
with 71
Windows CE, navigating in 69
Windows Explorer 78
Windows Vista® 34
Windows Zero Config (WZC) B-8
Window Width C-43
wireless connection setup 19
Wireless Information Tab 21
Wireless Properties tab 22
WPA authentication 23
WPA-PSK authentication 23
WZC (Windows Zero Config) B-8
1D internal scanner 60
2D Aztec C-52
2D Data Matrix C-51
2D imager scanner 61
2D Maxicode C-52
2D QR Code C-51
2D UPC Half Block Stitching C-19
36-key keyboard
alpha keys, accessing 48
uppercase letters, creating 49
58-key keyboard 48
7535 G2
approvals 204
specifications 201
802.1X authentication, enabling 24
802.11a/g/b radio 204
802.11g/b radio 204
802.11g radio, configuring 19
">