Snapper COMMERCIAL WALK-BEHIND Lawn Mower User Manual
Add to my manuals
Snapper COMMERCIAL WALK-BEHIND is a versatile accessory designed to enhance the functionality of your Snapper lawn mower. With a range of options available, you can customize your mower to suit your specific needs and preferences. The kit includes a variety of accessories, such as mulch kits, bagger kits, dual-wheel conversions, and sulkies, each offering unique features to improve your mowing experience.
advertisement
◉
Touch to zoom
Parts Manual for COMMERCIAL WALK-BEHIND ACCESSORIES IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT © 2002 SNAPPER INC. ALL RIGHTS RESERVED (IR, 12/02/02) MANUAL No. 06929 CONTENTS COMMERCIAL WALK-BEHIND MODEL IDENTIFICATION Positive identification of the machine will be necessary. Identify the machine with the model number to insure the correct kit is used for that model. The series number or letter of the model number is used in this manual to match the correct kit with the correct model. Refer to Owner’s Manual for correct Series number. KIT No. DESCRIPTION PAGE 6-1004 6-1005 6-1097 6-0800 6-0801 6-1300 Caster Wheels Wheels, Caster (36” Pro Mid Size)..................................................................................................4 Wheels, Caster (48”, 52” & 61” Pro Mid Size) .................................................................................4 Wheels, Caster (PRO 736, PRO 748 & PRO 752)..........................................................................5 Quick Height Adjustment, (Caster) (Semi-pneumatic) .................................................................6 Quick Height Adjustment, (Caster) (Pneumatic) ..........................................................................7 Roller, Corner (PRO 736 & PRO 748) ............................................................................................8 6-1194 6-1195 6-3048 6-3091 Ballast/Weights Ballast, Front (for Sulky) (PRO 736)..............................................................................................9 Ballast, Front (for Sulky) (PRO 748)..............................................................................................9 Ballast, Front (PRO 36) ................................................................................................................10 Ballast, Front (PRO Express 48” Deck)........................................................................................11 6-0803 6-0804 6-0937 6-1001 Dual-Wheel Conversion Dual Wheel Conversion (PRO Gear Drive w/bolt-in axles)..........................................................12 Dual Wheel Conversion, complete (PRO Gear Drive w/bolt-in axles) ........................................13 Dual Traction Belt (PRO 36 & PRO 48 Hydro).............................................................................14 Traction Idler.................................................................................................................................15 6-3080 6-1176 6-0848 6-0799 Note 1 Sulky Sulky, Stand/Sit (PRO Walk-Behind)................................................................................... 16 & 17 Sulky, PRO 7 (PRO 7 Gear & Hydro) ............................................................................................18 Sulky, Riding ................................................................................................................................19 Sulky, Riding (Kees Kit# 361700) .................................................................................................20 Sulky, Riding (Kees Kit# 601700) .................................................................................................21 6-0798 6-1105 6-3032 6-3033 6-3108 6-1853 6-1110 6-1111 6-0835 Bagger Kits Grass Catcher w/Hopper (32, 36 & 48” Commercial Mowers, Kees Kit# 361502) ......................23 Grass Catcher, Hopper Replacement (32, 36 & 48” Commercial Mowers) ................................24 Grass Catcher Mount (PRO units with SP, SPA & SPE Decks) ..................................................25 Grass Catcher, Cloth (PRO units with SP, SPA & SPE Decks) ...................................................26 Grass Catcher, Cloth (PRO units with SP, SPA & SPE Decks) ...................................................26 Grass Catcher Mount ..................................................................................................................27 Grass Catcher Mount (PRO 700 Walk-Behind) ...........................................................................28 Grass Catcher, Cloth (PRO 700 Walk-Behind; requires 6-1853).................................................28 Grass Catcher (Mid-Duty Walk-Behind)........................................................................................29 6-1976 6-1977 6-1220 6-1978 6-1979 6-1885 6-1218 6-1219 Blade Kits Mulching, 32” Deck (PRO Mowers) .............................................................................................30 Mulching, 36” Deck (PRO Mowers) .............................................................................................30 Mulching, 41” Deck (PRO Mowers) .............................................................................................30 Mulching, 48” Deck (PRO Mowers) .............................................................................................31 Mulching, 52” Deck (PRO Mowers) .............................................................................................31 Mulching, 61” Deck (PRO Mowers) .............................................................................................31 Mulching, 36” Deck (PRO 736 Deck)...........................................................................................32 Mulching, 48” Deck (PRO 748 Deck)...........................................................................................33 Note 1: No Snapper Kit; however individual parts may be obtained from Snapper. 2 CONTENTS (continued) KIT No. 6-3002 6-3005 6-3006 6-3007 6-3004 6-1868 6-1205 6-1871 6-1207 6-1208 6-1209 6-1210 6-0802 6-0896 6-3104 6-1783 6-0899 6-3136 6-1077 7-7288 6-0974 None DESCRIPTION PAGE R. A. D. Kits Quick Hitch (PRO Gear, PRO Hydro & PRO 7 Series 4 Mid-Size)...............................................34 46” Dozer Blade (PRO Gear & PRO Hydro Mid-Size) ..................................................................35 Debris Blower (PRO Gear, PRO Hydro & PRO 7 Series 4 Mid-Size) .............................36 thru 41 47” Rotary Broom (PRO Gear, PRO Hydro & PRO 7 Series 4 Mid-Size).......................42 thru 47 40” 2 Stage Snowblower (PRO Gear, PRO Hydro & PRO 7 Series 4 Mid-Size)............48 thru 55 Miscellaneous Kits Belt Tension Reduction (SPA360 Deck) .....................................................................................56 Belt Alignment Improvement (PRO 736 and PRO 748) .............................................................56 Engine Frame Brace (some SP360, SPA360 & SPA480 decks; see chart).................................57 Backside Idler (PP71250KW) .............................................................................................. 58 & 59 Backside Idler (PP7140KWV).......................................................................................................60 Backside Idler (PL71250KW) .......................................................................................................60 Backside Idler (PL7140KWV) .......................................................................................................60 Gas Tank Retrofit, 4 Gallon (Kees Kit #362080) .........................................................................61 Interlock Switch Update (PRO Mowers with 32”, 36” or 48” decks) ............................................62 Belt Anti-Vibration (PRO Mowers with SP480 or SPA480 decks) ...............................................62 Reverse Throttle Interlock (PRO 7 Series 1 & 2 Mowers)...........................................................63 Taperlock Pulley (PRO Mowers with 48” decks) ..........................................................................63 Shift Arm Extension (Electric Start PRO Hydro Series 0)............................................................64 Driven Disc Replacement (Mid-Duty Walk-Behind) .....................................................................64 Oil Filters (engine and hydraulic system) ......................................................................................65 Battery (Electric Start Models).......................................................................................................65 Exhaust Mufflers & Heat Shields (Various models) ........................................................... 66 & 67 3 CASTER WHEEL ASSEMBLY 6 18 5 3 7 4 20 19 9 2A, 2B 8 10 15 19 4 16 18 3 12 13 11 17 20 14 ITEM --1A 1B 2A 2B 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART NO. 6-1004* 6-1005* 5-2086 5-2084 4-0678 4-9798 2-3556 7-6998 2-3747 2-1960 1-9152 4-9805 1-7711 9-1050 9-0603 9-0118 9-0517 1-9289 1-6460 1-2705 5-2085 1-7786 1-7785 1-7784 9-0613 9-0563 DESCRIPTION KIT, Caster (36” Deck only) (Incl. items 1A, 2A & 3 thru 22) KIT, Caster (48/52/61” Decks) (Incl. items 1B, 2B & 3 thru 22) ASSEMBLY, Caster (36” Deck only) (Incl. Items 2A, 3 & 4) ASSEMBLY, Caster (48”, 52” & 61” Decks) (Incl. Items 2B, 3 & 4) SUPPORT, Caster (36” Deck only) (Incl. Items 3 & 4) SUPPORT, Caster (48”, 52’ & 61” Decks) (Incl. Items 3 & 4) BUSHING, Flange (2) FITTING, 1/4-28, Straight Lube BUSHING, Machinery, 1” BUSHING SPACER, Caster WELDMENT, Caster Yoke PIN, 7/16” Lynch BUSHING, Machinery, 3/4” SCREW, 3/8-16 x 7/8”, Hex Head, Grade 5 WASHER, 3/8” Split Lock WASHER, 3/8” Flat MOUNT, caster Axle AXLE, Caster RING, 3/4” External Retaining ASSEMBLY, Wheel & Tire (Incl. Items 18, 19 & 20) BEARING, 3/4” Flange (2) BEARING, 3/4” x 1” Roller 92) TIRE, 4-Ply Smooth Tread NUT, 3/8-16 Hex Flange Lock (2) SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (6) *NOTE: Kit 6-1004 will fit models: PMA360 and PMA8360. Kit 6-1005 will fit models: PMA8480, PMA520, PMA8610, PMA8520, PMA610 & PMA480. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 4 CASTER WHEEL ASSEMBLY 12 15 11 13 17 10 14 9 8 20 14 19 7 2 16 18 17 3 4 2 5 1 6 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. 6-1097 2-2258 2-2394 2-2392 2-2393 2-2395 2-2151 9-1121 9-1123 4-0726 1-7711 1-9152 2-1960 2-3747 2-3556 5-2298 7-6998 9-0563 9-0118 9-0517 7-6979 DESCRIPTION KIT, Caster (Incl. items items 1 thru 20) ASSEMBLY, Wheel & Tire (Includes items 2 thru 5) RETAINER, Flanged (2) TIRE, 9 x 3.50 - 4 (Includes Tube) ASSEMBLY, Wheel (Includes Items 2 & 5) BEARING, Roller SLEEVE, Axle NUT, 1/2-13 Hex (Nyloc) BOLT, 1/2-13 x 5-1/2" Hex Head Cap, Grade 5 YOKE, Caster (weldment) PIN, Lynch SPACER (3) SPACER, 1.005/1.010 I.D. x .270/.300 Thick BUSHING, 1.025/1.010 I.D. x .048 Thick BUSHING, Caster (2) ASSEMBLY, Caster Support (Includes Items 14 & 16) FITTING, Lube SCREW, 3/8-16 x 1" Hex Head Cap, Grade 5 (4) WASHER, 3/8 Split Lock (2) NOTE: Kit 6-1097 will fit models WASHER, 3/8 Flat (4) PRO 736, PRO 748 and NUT, 3/8-16 Hex (Nyloc) (2) PRO 752. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 5 CASTER, HEIGHT ADJUSTMENT 2 14* 4 4 This kit will fit on the following Models: W32080, W32120, W32120K, W32081, W32121, W32121K, W321252KW, W32142BV, W36120, W36120K, W36121, W36121K, W361252KW, W36142BV, W48120, W48120K, W48140S, W48121, W48121K, W481252KW, W48142BV, As well as PRO 736 and PRO 748 units. 1 5 3 6 4 7 3 9 15 12 16* 10 13 11 13 8 *NOTE: Items marked with asterisk are pre-existing and are not a part of this kit. ITEM -- PART NO. 6-0800 1 2 7-6515 7-6399 3 4 5 9-0517 7-6979 7-6997 6 7-6514 ITEM 7 8 DESCRIPTION KIT, Quick Height Adjust (Semi(Pneumatic) (Incl. 1-13 & 15) BUSHING, Straight (2) SUPPORT, Caster w/Bushings (7-6514 & 7-6515) (2) WASHER, 3/8” Flat (4) NUT, 3/8-16 Hex Nyloc (4) FITTING, Lube, 1/8 NPT Straight (2) BEARING, Flange Thrust (powdered metal) 9 10 11 12 13 14 15 16 MANUAL No. 06929 PART NO. DESCRIPTION 7-6400 YOKE, Caster (weldment) (2) 7-6506 ASSEMBLY, Semi-Pneumatic Tire (2) 7-6552 AXLE, Caster (2) 7-6967 LYNCH PIN, 3/16” Diameter (2) 7-6998 FITTING, Lube, 1/4-28, Straight 7-7320 BEARING, Roller (2) 7-7321 CAP, End (2) 7-7000 COLLAR, Clamp 7/8” (existing) 7-6927 SCREW, 3/8-16 x 1-14” Hex Head Cap (4) 7-6949 BOLT, 3/8-16 x 1-3/4” Hex Head Cap (existing) COMMERCIAL WALK-BEHIND ACCESSORIES 6 CASTER, HEIGHT ADJUSTMENT 2 19* 4 4 This kit will fit on the following Models: W32080, W32120, W32120K, W32081, W32121, W32121K, W321252KW, W32142BV, W36120, W36120K, W36121, W36121K, W361252KW, W36142BV, W48120, W48120K, W48140S, W48121, W48121K, W481252KW, W48142BV, As well as PRO 736 and PRO 748 units. 1 5 3 6 4 8 3 10 20 22 21* 18 17 14 11 16 7 15 12 9 13 14 *NOTE: Items marked with asterisk are pre-existing and are not a part of this kit. ITEM -- PART NO. 6-0801 1 2 7-6516 7-6399 3 4 5 9-0517 7-6979 7-6997 6 7-6514 7 8 9 1-2234 7-6401 7-6408 10 7-6549 ITEM 11 12 13 14 15 16 17 18 19 20 DESCRIPTION KIT, Quick Height Adjust (Pneu.) (Incl. 1-18 & 20) BUSHING, Straight (2) SUPPORT, Caster w/Bushings (7-6514 & 7-6515) (2) WASHER, 3/8” Flat (4) NUT, 3/8-16 Hex Nyloc (4) FITTING, Lube, 1/8 NPT Straight (2) BEARING, Flange Thrust (powdered metal) STEM, Air Valve YOKE, Caster (weldment) (2) ASSEMBLY, Pneumatic Tire (Incl. 7, 12-16 & 18 (2) AXLE, Caster (2) MANUAL No. 06929 PART NO. 7-6967 7-7356 7-6998 7-7353 7-7346 7-7350 7-7720 2-3557 7-7000 9-0563 21 7-6949 22 1-0821 DESCRIPTION LYNCH PIN, 3/16” Diameter (2) CAP, End FITTING, Lube, 1/4-28, Straight BEARING, Roller (2) TIRE, Pneumatic RIM, Pneumatic Tire WASHER, Tab (4) CAP, End COLLAR, Clamp 7/8” (existing) SCREW, 3/8-16 x 1” Hex Head Cap (4) BOLT, 3/8-16 x 1-3/4” Hex Head Cap (existing) TUBE, Inner (optional) COMMERCIAL WALK-BEHIND ACCESSORIES 7 CORNER ROLLER NOTE: THE WELDNUTS SHOWN HERE ARE USED ON THE 48” DECK ONLY. 4 5 3 6 3 2 36” & 48” CUTTING DECKS 1 7 8 3 5 8 ITEM -1 2 3 4 5 6 7 8 PART NO. 6-1300 1-6829 2-7209 9-0517 2-7208 9-0563 9-0118 3-3080 7-6979* DESCRIPTION KIT, Corner Roller (Incl. items 1 thru 8) ROLLER, Corner SPACER, Roller WASHER, 3/8” Flat (3) BOLT, 3/8-16 x 5-1/2” Hex Head Cap SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (2) WASHER, 3/8” Split Lock BRACKET, Roller NUT, 3/8-16 Hex Nyloc (3) *NOTE: Only two of these nuts are needed on the 48” Deck. The 48” Deck is equipped with weld-nuts as illustrated above. NOTE: Kit 6-1300 will fit models PRO 736 & PRO 748 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 8 FRONT BALLAST 2 1 5 ITEM -1 2 3 4 5 PART NO. 6-1194 4-1338 9-0629 9-0517 9-0118 7-6979 4 3 3 DESCRIPTION KIT, Front Ballast (Incl. items 1 thru 5) STRUCTURE, Front Ballast BOLT, 3/8-16 x 2-1/4” Hex Head, Grade 5 (5) WASHER, 3/8” Flat (10) WASHER, 3/8” Split Lock (5) NUT, 3/8-16 Hex Nyloc (5) NOTE: This kit is for the PRO 736 mid-size walk-behind mower. LEFT IN PLACE 1 2 LEFT IN PLACE 1 ITEM -1 2 PART NO. 6-1195 2-4510 9-0655 DESCRIPTION KIT, Front Ballast (Incl. items 1 & 2) BALLAST, Front (2) SCREW, 3/8-16 x 1-1/2”, Grade 5 (6) NOTE: Re-use existing washers NOTE: This kit is for the PRO 748 mid-size walk-behind mower. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 9 FRONT BALLAST 1 7 3 2 5 4 8 6 ITEM -1 2 3 4 5 6 7 8 PART NO. 6-3048 4-6664 9-1884 9-1322 9-1316 3-5756 2-7181 9-1299 7-3647 DESCRIPTION KIT, Weight (Incl. items 1 thru 8) WEIGHT, Front, PRO 36” Deck (painted) SCREW, 1/2-13 x 1-1/2” Hex Head Cap (2) WASHER, 1/2” Split Lock (2) NUT, 1/2-13 Hex, Grade 5 (2) WEIGHT, Top (2) BOLT, 3/8-16 x 1-1/4” Short Neck Carriage, Grade 5 (2) NUT, 3/8-16 Hex Nyloc (2) DECAL, Caution Guard/Catcher NOTE: This weight kit fits the Express Deck used with gear drive units SPP1250KW, SPP140KW, SPP140KH, SPL1250KW, SPL140KW & SPL140KH; as well as hydro drive units SPLH140KW, SPLH140KH, SPLH160BV & SPLH180KHE. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 10 FRONT BALLAST 5 2 2 2 1 1 * 3 4 3 3 3 4 4 4 ITEM -1 2 3 4 5 PART NO. 6-3091 7-2735 9-1328 9-0122 9-1299 7-3647 *NOTE: These holes must be drilled in the deck for installation Of this kit. DESCRIPTION KIT, Ballast 48” Express Deck (Incl. items 1 thru 5) BALLAST, 48” Express Deck (2) SCREW, 3/8-16 x 1-1/4” Hex Head Cap, Grade 5 (4) WASHER, 3/8” Flat (8) NUT, 3/8-16 Nyloc (4) DECAL, Caution Guard/Catcher NOTE: This kit fits the Pro Commercial Walk Behind with 48” Express Mower Deck. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 11 DUAL WHEEL CONVERSION 10 This kit will fit PRO Commercial Walk-Behind (Gear Drive) mowers, built prior to 1990, that have bolt-in rear axles. existing spacer 8 11 existing tire assembly 9 1 2 3 6 existing clamp collar 4 6 5 4 ITEM -1 2 3 4 5 6 7 8 9 10 11 PART NO. 6-0803 7-6389 7-7311 1-2234 7-7313 2-3788* 7-7312 7-6998 7-6539 7-6540 7-6396 7-6542 7 DESCRIPTION KIT, Dual Wheel Conversion (Incl. items 1 thru ) ASSEMBLY, Sulky Tire (complete) (Incl. items 2 thru 7) (2) RIM (Includes items 3 & 7) STEM, Air Valve BEARING, Roller (2) TIRE, 13 x 6.50-6 BEARING, Flange (2) FITTING, Lube, 1/4-28, Straight COUPLING-DRIVE, Inside COUPLING, Drive, Outside WELDMENT, Rear Axle, Dual Wheel, PTD SPACER, Dual Wheel (2) *or 77310 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 12 DUAL WHEEL CONVERSION This kit will fit PRO Commercial Walk-Behind (Gear Drive) mowers, Built prior to 1990, that have bolt-in rear axles. 15 6 2 4 11 8 3 9 existing spacer 5 10 4 16 7 6 14 13 1 existing clamp collar 12 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 6-0804 7-6394 7-6410* 1-2234 7-7313 2-3788** 7-7312 7-6998 9-0118 7-7748 7-6539 7-6440 7-6395 7-7284 7-6540 7-6396 7-6542 DESCRIPTION KIT, Dual Wheel Conversion (complete) (Incl. items 1 thru 16) ASSEMBLY, Drive Tire (complete, dual wheel) (Incl. items 2 thru 7) (2) RIM & PULLEY, Drive (dual wheel) STEM, Air Valve BEARING, Roller (2) TIRE, 13 x 6.50-6 BEARING, Flange (2) FITTING, Lube, 1/4-28, Straight WASHER, 3/8” Split Lock (4) SCREW, 3/8-24 x 3/4” Hex Head Cap, Grade 5 (4) COUPLING-DRIVE, Inside DRUM, Brake, PTD TIRE, Driven (complete, dual wheel) (Incl item 14) (2) RIM, Driven COUPLING, Drive, Outside WELDMENT, Rear Axle, Dual Wheel, PTD SPACER, Dual Wheel (2) *or 7-7283 MANUAL No. 06929 **or 7-7310 COMMERCIAL WALK-BEHIND ACCESSORIES 13 DUAL TRACTION BELT 2 13 11 12 24 4 9 24 1 15 11 10 17 16 7 3 8 6 11 5 23 19 22 18 ITEM -1 2 3 4 5 PART NO. 6-0937 1-9202 1-9223 1-9224 1-9225 5-9800 -6 7 8 9 10 1-9206 2-3515 2-3787 3-8473 4-0606 7-7670* -- 9-0629 This kit will fit 36 & 48” PRO Commercial Walk-Behind (Hydro Drive) mowers built. Prior to 1990. 18 19 20 21 DESCRIPTION KIT, Dual Traction Belt (Incl. 1 thru 25) BELT, Traction (Dual Band) (2) PULLEY, Output (2) HUB, Brake (2) PULLEY, Idler (2) ASSEMBLY, Wheel (Includes 1-9206 & items 17-22) (2) ASSEMBLY, Wheel w/o pulley SPACER (8) BUSHING, 7/8” (2) PULLEY, Traction (4) SCRAPER (2) SCREW, 3/8-24 x 1-3/4” Hex Head Cap, Grade 5 (2) SCREW, 3/8-16 x 2-1/4” Hex Head Cap, Grade 5 (2) ITEM 11 12 13 14 15 16 PART NO. 9-0118 9-0187 9-0196 9-0517 9-0585 9-0164 17 18 19 20 21 22 23 2-3788 7-7312 7-7313 7-6998 1-9256 1-2234 7-7000 24 25 3-8513 3-2865** DESCRIPTION WASHER, 3/8” Split Lock (10) WASHER, 5/16” Split Lock (2) NUT, 5/16” Hex, Gr. 5 or B (2) WASHER, 3/8” Flat (10) NUT, 5/16-18 Flange Lock (2) SCREW, 3/8-24 x 1-1/2” Hex Head Cap, Grade 5 (8) TIRE, 13 x 6.50-6 (4 Ply) BUSHING, Flange (2) BEARING, Roller (2) FITTING, Lube, 1/4-28, Straight ASSEMBLY, RIM, w/Flange STEM, Air Valve COLLAR CLAMP w/Set Screw (2) GUIDE, Belt (2) GUIDE, Belt (2) *this bolt used on units with serial numbers starting with 9 MANUAL No. 06929 **installs on idler pulley COMMERCIAL WALK-BEHIND ACCESSORIES 14 TRACTION IDLER This kit will fit SNAPPER Commercial (KEES) WalkBehind mowers built Prior to 1990. 7 11 12 6 5 13 6 8 4 2 9 7 BELLCRANK (RE-USE) 10 3 10 5 1 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 6-1001 5-2090 4-0679 7-6998 7-7860 1-6473 9-0517 1-9225 9-0118 7-7670 9-1030 5-2091 7-7846 7-7859 DESCRIPTION KIT, Traction Idler (Incl. items 1 thru 13) ASSEMBLY, Left Support Bracket (Incl. items 2 thru 10) WELDMENT, Left Bearing Support FITTING, Lube, 1/4-28, Straight WELDMENT, Traction, Left COLLAR, Shaft WASHER, 3/8” Flat (3) IDLER PULLEY WASHER, 3/8” Split Lock SCREW, 3/8-24 x 1-3/4” Hex Head Cap, Grade 5 BUSHING, Machine (3) ASSEMBLY, Right Support Bracket (Incl. items 3, 5, 12 & 13) WELDMENT, Right Support Bracket WELDMENT, Traction, Right MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 15 STAND/SIT SULKY 12 2 9 11 1 25 25 26 28 27 8 27 29 7 21 29 29 30 30 30 32 19 31 16 30 6 6 3 20 10 6 3 6 9 3 15 24 23 3 19 1 20 3 33 (orient as shown) 18 14 22 13 4 2 5 20 29 5 17 24 15 20 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 16 STAND/SIT SULKY ITEM -1 2 3 4 5 6 7 8 9 ------10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 PART NO. 6-3080 2-9617 1-1022 9-1891 2-4351 2-4352 9-1619 3-3607 3-3608 5-2268 2-3828 1-0821 1-7146 1-1807 1-4669 1-2234 7-2092 7-2090 7-2091 7-2268 7-2269 7-2270 7-2271 9-1299 7-7780 9-1516 9-1514 9-1821 9-1811 9-1560 9-1304 9-1315 9-1316 9-1527 9-1587 9-1601 9-1908 7-2093 7-2321 7-2646 1-9293 9-1585 7-2536 DESCRIPTION KIT, Stand/Sit Sulky (Includes items 1 thru 36) WASHER, 3/4” Flat (4) CAP, Hub (2) BOLT, 3/8-16 x 1”, Grade 5 (6) PIN, 1/2 x 1-3/16” Clevis SPRING (2) NUT, 3/8-16 Hex Flange Lock (6) HITCH, Bottom HITCH, Top ASSEMBLY, Wheel ( includes 6 items below) (2) TIRE, 4.10/3.50-4 TUBE, Tire RIM, Wheel BALL BEARING, Flange (2) LUBE FITTING VALVE STEM WELDMENT, Seat Support BRACKET, Seat SEAT HITCH, Draw Bar DRAW BAR BRACE, Draw Bar (2) PAD, Friction NUT, 3/8-16 Hex Nyloc (4) PIN, 7/16 HD Lynch PIN, 5/32 x 1” Cotter (2) WASHER, 13/32” Flat (4) SCREW, 1/2-13 x 3” Hex Head Cap, Grade 5 BOLT, 5/16-18 x .5/8” Hex Flange Lock, Grade 5 (2) SCREW, 3/8-16 x 2-1/4” Hex Head Cap, Grade 5 (2) SCREW, 3/8-16 x 1”Hex Head Cap, Grade 5 (2) WASHER, 21/64” Split Lock (2) NUT, 1/2-13 Hex Grade 5 (2) SCREW, 5/16-18 x 1-1/4” Hex Head Cap, Grade 5 (2) WASHER, 17/32” Flat NUT 5/16-18 Hex Flange Lock, Grade 5 (6) SCREW, 5/16-18 x 1.3/4”, Grade 5 (4) WELDMENT, Carriage/Axle TUBE, Seat Extension DECAL, Warning NAMEPLATE, Snapper (not shown) NUT, 3/8-16 Hex Center Lock (Not shown in illustration) (2) DECAL, Snapper (not shown) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 17 SULKY, PRO 7 This kit will fit SNAPPER PRO 7 Gear and Hydro Walk-Behind mowers. ITEM -1 PART NO. 6-1176 2-4353 2 3 4 5 6 3-3516 3-3604 4-1308 4-1329 5-2821 7 8 9 10 11 12 13 14 15 16 17 1-4438 2-4352 3-3610 3-3611 7-6979 9-0188 9-0517 9-0629 9-0717 5-2822 5-2823 18 19 20 21 22 23 24 25 26 1-3370 1-3492 2-2960 2-3735 2-4350 2-4351 2-4623 3-3606 3-3607 ITEM 27 28 29 30 31 DESCRIPTION KIT, Sulky (Incl. 1 thru 47) ASSEMBLY, Wheel (incl. tire, rim, 2 ball bearings, air valve & grease fitting (2) TUBE, Seat Support BRACE, Draw Bar (2) WELDMENT, Seat Adjust WELDMENT, Channel Brace ASS’Y, Drawbar/Hitch (incl. items 7 thru 15) HOOK (5/16-18 thread) SPRING, 3/4” O. D. x 1-1/2” HITCH DRAWBAR NUT, 3/8-16 Hex Nyloc (2) WASHER, 5/16” Flat (11) WASHER, 3/8” Flat (2) BOLT, 3/8-16 x 2-1/4” (2) NUT, 5/16-18 Hex Nyloc (6) SEAT (with 1-9295 Decal) WELDMENT, Frame (with 7-7774 Decal) WASHER, 1” I. D. Flat WASHER, Special (8) SPACER, Seat (2) KNOB (5/16-18 thread) SPACER, Axle (2) PIN, 1/2 x 1-3/16” Clevis CHAIN, Hitch CLAMP HITCH, Bottom MANUAL No. 06929 PART NO. 3-3608 3-3626 3-3638 7-6526 7-6934 32 7-6938 33 34 35 36 37 38 39 7-6979 7-7780 9-0187 9-0250 9-0297 9-0364 9-0563 40 9-0588 41 9-0669 42 9-0930 43 9-0959 44 9-0975 45 9-1046 46 9-1170 47 2-4354 DESCRIPTION HITCH, Top LEVER, Shift Sulky SADDLE GRIP, Adj. Lever SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 5 (6) SCREW, 5/16-18 x 2-1/4” Hex Head Cap, Grade 5 NUT, 3/8-16 Hex Nyloc (5) PIN, Lynch WASHER, 5/16” Split Lock (7) WASHER, 1/2” Flat (2) PIN, 1/8 x 1-1/2” Cotter PIN, 5/32 x 1” Cotter (2) SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (3) SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5 (2) SCREW, 5/16-18 x 1-3/4” Hex Head Cap, Grade 5 (2) BOLT, 5/16-18 x 2” Hex, Grade 5 BOLT, 5/16-18 x 2-1/2” Sq. Neck Carriage, Grade 5 NUT, 1/2-13 Hex Center Lock, Grade 5 or B (2) SCREW, 5/16-18 x 2-1/2” Hex Head Cap, Grade 5 BOLT, 1/2-13 x 1-3/4” Bolt, Grade 5 INSTRUCTIONS COMMERCIAL WALK-BEHIND ACCESSORIES 18 SULKY 26 10 25 27 24 22 28 12 21 15 1 19 16 23 18 3 20 5 13 17 16 11 2 4 4 15 10 14 9 6 7 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 6-0848 7-6926 7-7768 7-7780 9-0717 7-7772 7-7787 9-0297 1-4661 9-0258 9-0254 7-7778 7-7777 9-0692 7-6389 8 DESCRIPTION KIT, Sulky (Includes 1 thru 28) SCREW, 5/16-18 x 1” Hex (2) WELDMENT, Hitch PIN, Lynch NUT, 5/16-18 Hex Nyloc (6) WELDMENT, Frame AXLE, Roller PIN, 1/8 x 1-1/2” Cotter ROLLER NUT, 1/2-13 Hex, Gr. 5 or B (2) WASHER, 1/2” Split Lock (3) PAD, Abrasive (2) FOOT REST (w/o pad) WASHER, 5/16” Flat (4) ASS’Y, Tire (incl. 16-20) (2) MANUAL No. 06929 ITEM 15 16 17 18 19 20 PART NO. 7-7000 7-7312 7-7313 7-6998 7-7310 7-7311 21 22 23 24 25 26 27 28 7-7776 7-6604 7-6596 7-6929 7-7774 7-7775 7-6928 7-7303 DESCRIPTION CLAMP, Collar (4) BEARING, Flange (2) BEARING, Roller (2) FITTING, 1/4-28 Grease TIRE, 2 Ply Turfmaster ASS’Y, Rim (incl. air valve & grease fitting) AXLE, Main U-Bolt (5/16-18 threads) (2) STIFFENER SCREW, 1/2-13 x 2” Hex (2) DECAL, Warning SPRING, Seat (incl. item 25) SCREW, 1/2-13 x 1” Hex Head SEAT w/Decal COMMERCIAL WALK-BEHIND ACCESSORIES 19 SULKY, RIDING 2 7 6 13 5 21 23 15 22 3 20 23 4 14 9 26 14 27 1 18 19 17 16 20 27 10 14 7 17 24 8 11 28 8 25 12 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 6-0799 7-7302 7-6595 7-6596 7-6603 7-6929 7-6928 9-0254 9-0258 7-6224 7-6995 7-6999 7-6602 7-6925 9-0717 ITEM 15 16 17 18 19 DESCRIPTION KIT, Sulky (Includes 1 thru 28) (Was Kees #361700) FRAME (with decal) SPRING STIFFENER SHIM (2) SCREW, 1/2-13 x 2” Hex (2) SCREW, 1/2-13 x 1” Hex WASHER, 1/2” Split Lock (4) NUT, 1/2-13 Hex, Gr. 5 or B (3) CHAIN, #8 Sash (9” long) PIN, Quick Release Hitch SPLIT RING EYEBOLT, 1/2” Dia. Forged BOLT, 5/16-18 x 3/4” Hex (2) NUT, 5/16-18 Hex Nyloc (10) MANUAL No. 06929 PART NO. 7-6413 7-7313 7-7312 7-7310 7-7311 20 21 22 23 24 25 7-7000 7-7303 7-6607 7-6604 7-6606 7-6389 26 27 28 7-6998 9-0692 7-6996 DESCRIPTION HITCH BEARING, Roller (2) BEARING, Flange (2) TIRE, 2 Ply Turfmaster ASS’Y, Rim (incl. air valve & grease fitting) CLAMP, Collar (4) SEAT w/Decal AXLE U-Bolt (5/16-18 threads) (2) FOOT REST ASS’Y, Tire (includes items 16-19 & 26) (2) FITTING, 1/4-28 Grease WASHER, 5/16” Flat (8) GRIP, Foot Rest (2) COMMERCIAL WALK-BEHIND ACCESSORIES 20 SULKY, RIDING 10 18 2 20 19 21 1 4 2 1 17 15 2 9 3 16 8 5 6 12 12 6 11 7 14 13 ITEM -1 2 3 4 5 6 7 8 9 10 PART NO. *Note 1 7-6998 7-7312 7-7313 7-7435 7-7607 7-6508 9-0297 7-7435 7-7437 7-7000 ITEM 11 12 13 DESCRIPTION KIT, Sulky (Includes 1 thru 21) (Was Kees #601700) FITTING, 1/4-28 Grease (2) BEARING, Flange (2) BEARING, Roller (2) TIRE, Straight Ribbed w/Rim PIN, Axle SPACER (2) PIN, 1/8 x 1-1/2” Cotter (2) ASSEMBLY, Tire (2) WELDMENT, Swivel 7/8” CLAMP, Collar 14 15 16 17 18 19 20 21 PART NO. 7-6979 7-7612 9-0563 7-6967 7-7436 7-7666 9-0254 7-7303 7-7438 7-7620 7-7221 DESCRIPTION NUT, 3/8-16 Hex Nyloc (4) BRACKET, Hitch SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (4) PIN, 3/16” Dia. Lynch FRAME SCREW, 1/2-13 x 3/4” Hex WASHER, 1/2” Split Lock (4) SEAT w/Decal KIT, Arm PLUG, Square (2) BEARING, Roller (2) *NOTE1 : Although there is no Snapper Kit, individual parts may be ordered under the Snapper part numbers as shown in the above table. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 21 THIS PAGE LEFT INTENTIONALLY BLANK 22 GRASS CATCHER, w/Hopper 3 31 2 2 2 34 2 3 33 32 4 28 5 9 12 17 8 11 10 21 6 27 23 10 4 7 13 11 18 6 20 6 11 10 23 7 7 11 5 17 6 30 7 26 7 7 14 6 29 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 6-0798 7-7296 9-0548 7-6585 7-6586 7-6978 7-6926 9-0717 7-6983 7-6581 7-6977 7-6952 7-6412 7-6587 7-6575 7-7753 7-6580 ENGINE HOLD DOWN BOLT 19 6 11 1 25 22 24 8 15 7 10 7 24 24 ITEM 17 18 19 20 21 22 23 24 25 26 DESCRIPTION KIT, Grass Catcher (Incl. 1- 34) HOPPER/FRAME (Complete) SCREW, 1/4-20 x 1” Hex Head (4) HANDLE, Hopper (2) PLATE, Handle Brace (2) NUT, 1/4-20 Hex Nyloc (4) SCREW, 5/16-18 x 1” Hex Hd.(10) NUT, 5/16-18 Hex Nyloc (11) WASHER, 1/4” Spring (4) CATCHER LATCH, Right NUT, #10-24 Hex Nyloc SCREW, #10-24 x 5/8” Pan Head Machine (10) BACK PLATE (Complete) CATCHER BRACE, Front CATCHER BRACE, Rear Long BRACKET, Supp. (48” S.W.Only) CATCHER BRACE, Rear Short 27 28 29 30 31 32 33 34 PART NO. 9-0692 7-6979 7-6582 9-0517 7-7297 7-6411 7-6588 7-6958 7-6589 7-6361 7-6592 7-6591 1-7051 7-6949 1-9295 7-6583 7-7359 7-7360 DESCRIPTION WASHER, 5/16” Flat (4) NUT, 3/8-16 Hex Nyloc CATCHER LATCH, Left WASHER, 3/8” Flat (2) HOPPER w/Decals FRAME, Hopper WASHER, Grass Catcher (15) POP RIVET (15) PLATE, Skid CATCHER BRACE, Rear Short (32” Only) COVER, Screen SCREEN, Backplate DISC, Blade (3) SCREW, 3/8-16 x 1-3/4” Hex DECAL, Snapper DECAL, Warning SCREEN, Top Front SCREEN, Top Rear NOTE: This kit fits 32”, 36” & 48” PRO Mowers MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 23 GRASS CATCHER, HOPPER REPLACEMENT 4 6 4 4 1 1 4 7 2 3 11 15 13 9 12 5 16 8 10 16 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO. 6-1105 7-6585 7-6586 7-6978 9-0548 7-7296 1-9295 7-6583 7-6411 7-6588 7-6589 7-7294 7-7358 7-7360 7-7706 7-7359 9-2059 16 DESCRIPTION KIT, Grass Catcher Hopper Replacement (Includes items 1 thru 5) HANDLE, Hopper (2) PLATE, Handle Brace (2) NUT, 1/4-20 Hex Nyloc (4) SCREW, 1/4-20 x 1” Hex Head Cap, Grade 5 (4) ASSEMBLY, Hopper with Frame (Includes items 6 thru 11) DECAL, Snapper DECAL, Warning FRAME, Hopper WASHER, Grass Catcher (15) PLATE, Skid ASS’Y, HOPPER w/Screens (Includes items listed below) HOPPER, Grass Catcher SCREEN, Top Rear POP RIVET, 1/8 x .453 Aluminum (20) SCREEN, Top Front POP RIVET, 3/16 #66 (15) NOTE: This kit fits 32”, 36” & 48” PRO Mowers. For a complete kit, or if you need to replace parts not shown above you may order kit #6-0798. Pre-assembly of kit #6-1110 (Grass Catcher Mount Kit) is required before use of 6-1105. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 24 GRASS CATCHER, MOUNT 19 BACKPLATE (part of kit) HOPPER (REFERENCE) ) 2 16 12 10 13 19 17 15 19 18 7 19 14 11 3 4 8 5 6 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. 6-3032 5-7700 2-2522 3-3198 4-2750 9-1134 3-4156* 3-4157* 3-4158* 6-3034 3-3433 3-3432 4-6383 9-1495 9-1545 1-5464 9-0854 7-6952 9-1290 7-6983 DESCRIPTION KIT, Catcher Mounting (Includes items 1 thru 9) ASSEMBLY, Back Plate DECAL, Warning PLATE, Backing STRIP, Side Sealing POP RIVET (3) CAP, Deflector DEFLECTOR, Exhaust SCREW, Deflector Mounting (3) BAG, Hardware (Includes the items listed below) LATCH, Left Side LATCH, Right Side STRIP, Top Seal SCREW, 1/4-20 x 3/4” Hex Head Cap (3) NUT, 1/4-20 Hex Flange Lock (3) STUD, 3/8-24 Thread *NOTE: NUT, 3/8-24 Hex Nyloc These parts are required SCREW, #10-24 x 5/8” Pan Head (4) on Kawasaki engines only. NUT, #10-24 Hex Nyloc (4) WAVE WASHER (spring) This kit will fit on PRO Gear, PRO Gear Express and PRO Hydro Mid Size walk-behind mowers, and must be installed prior to using Cloth Grass Catcher Kit #6-3033. With deck models SP320, SP360, SPA360, SPE360, SP480, SPA520 & SPA610, install items 12, 13 and 14 as shown above. Omit this step in all other deck models. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 25 GRASS CATCHER, CLOTH 2 8 8 10 4 5 9 10 1A, 1B 7 10 9 10 6 3 9 ITEM --1A 1B 2 3 4 5 6 7 8 9 10 PART NO. 6-3033 6-3108 5-7703 5-8461 4-0740 4-0741 3-3381 3-3171 3-3380 3-3382 9-0825 9-0643 7-6978 DESCRIPTION KIT, Cloth Bag Catcher (Includes items 1A thru 10) KIT, Cloth Bag Catcher (Includes items 1B thru 10) BAG, Cloth Grass BAG, Cloth Grass WELDMENT, Top Frame WELDMENT, Front Frame HANDLE, Short HANDLE, Long BRACE, Large BRACE, Small SCREW, 1/4-20 x 1-1/4” Hex Head Cap (2) SCREW, 1/4-20 x 7/8” Hex Head Cap (3) NUT, 1/4-20 Hex Nyloc (7) NOTE: These kits must be used with #6-3032 Catcher Mount Kit which must be installed first. See previous page for listing of models which accept this kit. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 26 GRASS CATCHER MOUNT 7 8 10 2 19 18 6 BACKPLATE (part of kit) 13 12 16 HOPPER (REFERENCE) 17 3 19 4 11 15 18 19 5 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 PART NO. 6-1853 5-4067 2-2522 3-3198 3-3199 9-1134 3-4156* 3-4157* 3-4158* 6-1108 3-3433 3-3432 4-2751 9-1495 9-1545 1-5464 9-0854 7-6952 9-1290 7-6983 14 DESCRIPTION KIT, Grass Catcher Mount (Includes items 1 thru 9) ASSEMBLY, Backplate DECAL, Warning PLATE, Backing STRIP, Side Sealing POP RIVETS (3) CAP, Deflector DEFLECTOR, Exhaust SCREW, Deflector Mounting (3) BAG, Hardware (Includes the items listed below) LATCH, Left Side LATCH, Right Side STRIP, Top Seal SCREW, 1/4-20 x 3/4” Hex Head Cap (3) NUT, 1/4-20 Hex Flange Lock (3) STUD, 3/8-24 Thread *NOTE: NUT, 3/8-24 Hex Nyloc These parts are required SCREW, #10-24 x 5/8” Pan Head (4) on Kawasaki engines NUT, #10-24 Hex Nyloc (4) only. WAVE WASHER (spring) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 27 GRASS CATCHER, MOUNT 3 12 2 4 11 5 7 8 6 10 9 NOTE: The two kits shown on this page are compatible with SNAPPER PRO 7 commercial walk-behind mowers. ITEM -1 2 3 4 5 PART NO. 6-1110 4-0736 3-3198 3-3199 9-1134 3-3433 8 1 ITEM 6 7 DESCRIPTION KIT, Grass Catcher Mount (Includes items 1-12) PLATE, Mounting BACKING PLATE SEALING STRIP “POP” RIVET, 3/16 x 5/8” (3) LATCH, Left 8 9 10 11 12 PART NO. DESCRIPTION 3-3432 LATCH, Right 7-6952 SCREW, #10-32 x 5/8” Pan Head (4) 7-6983 WASHER, Spring (4) 7-6977 NUT, #10-24 Hex Nyloc (4) 1-5464 STUD, 3/8-24 Thread 9-0854 NUT, 3/8-24 Hex Nyloc 2-2522 DECAL, Caution GRASS CATCHER, CLOTH 8 2 8 1 10 5 4 9 7 10 9 10 10 10 9 6 3 ITEM -1 2 3 4 5 6 7 8 9 10 PART NO. 6-1111 5-2340 4-0740 4-0741 3-3381 3-3171 3-3380 3-3382 9-0825 9-0643 7-6978 DESCRIPTION KIT,Cloth Grass Catcher (Incl. items 1 thru 10) GRASS BAG, Cloth NOTE: Assembly of the above kit WELDMENT, Top Frame (6-1110) is required prior WELDMENT, Front Frame to use of kit no. 6-1111. HANDLE, Short HANDLE, Long BRACE, Large BRACE, Small SCREW, 1/4-20 x 1-1/4” Hex Head Cap, Grade 5 (2) SCREW, 1/4-20 x 7/8” Hex Head Cap, Grade 5 (3) NUT, 1/4-20 Hex Nyloc (7) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 28 GRASS CATCHER 7 13 12 10 20 24 1 22 23 17 19 23 10 9 18 24 21 30 ASSEMBLY 25 26 18 22 16 23 8 32 23 24 24 30 24 31 27 28 29 2 14 36 34 35 5 33 BLADE 3 6 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 6-0835 5-1709 1-5896 5-1717 1-8959 1-7008 2-7670 3-8336 3-8337 9-0803 9-0583 9-0074 9-0155 9-0390 5-1710 5-1663 9-0847 1-0916 1-1763 11 ITEM 19 20 DESCRIPTION KIT, Grass Catcher (Incl. 1-36) ASS’Y., Bag (Incl. 2 thru 13) BAG, Grass SLIDER, Grass Bag (Incl. rope) WIRE, Bag Support, Rear ADAPTER, Bag, front WIRE, Bag, Front ADAPTER, Handle LATCH, Chute BOLT, 1/4-20 x 5/8” Carr. (2) NUT, 1/4-20 Hex Flange (6) BOLT, 1/4-20 x 3/4” Carr. (4) NUT, 3/8-24 Hex WASHER, 3/8” Int. Tooth Lock ADAPTER ASS’Y (Incl. 15-19) CHUTE ASSEMBLY SCREW, 1/4-20 x 3/4” Rd. Hd. SPACER WASHER, 5/16” Flat (2) 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 PART NO. DESCRIPTION 9-0372 NUT, 1/4-20 Hex Center Lock 5-1711 SUPPORT ASS’y, Bag, Rear (Includes items 21 thru 24) 2-7671 TUBE, Rear Support, Bag 9-0529 BOLT, 1/4-28 x 1-1/4” Hex (2) 9-0053 WASHER, 1/4” Lock (5) 9-0095 NUT, 1/4-28 Hex (7) 3-6229 SUPPORT TUBE, Rear Bag 3-8335 BRACKET, Support 1-5509 CABLE-TIE 1-4729 ROLLER 9-0959 BOLT, 5/16-18 x 2-1/2” Carriage 9-0552 SCREW, 1/4-28 x 1-3/8” (3) 9-0541 SCREW, 1/4-28 x 3/4” Hex (2) 9-0598 WASHER, 1/4” Flat (2) 9-0228 SCREW, 5/16-24 x 21/32” (4) 9-0391 WASHER, 5/16” Int’l. Tooth (4) 9-0223 NUT, 5/16-24 Hex (4) 3-1724 AIR LIFT (2) NOTE: This kit will fit models Y30080 & Y30120 Mid-Duty Commercial Walk-Behind mowers. Model Y41120 requires the inclusion of 5-1739, Extension Assembly, in addition to kit 6-0835. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 29 MULCHING (PAGE 1 OF 2) “EXISTING” FASTENER NOTE: THIS VIEW ILLUSTRATES KIT #6-1220, FOR 41” DECKS. 41” CUTTING DECK 3 2 4 “EXISTING” FASTENER ITEM PART NO. DESCRIPTION -- 6-1976 KIT, Mulching, 32” Deck (Includes items 1 thru 4) 1 2-4868 BLADE, 16.5” Quad Edge (2) 2 4-4733 WELDMENT, Mulching Cover, 32” 3 9-0367 SCREW, 1/2-20 x 3/4” Hex Head Cap 4 9-0559 NUT, 1/2-20 Hex Jam NOTE: Kit # 6-1976 replaces Kit #6-1850. ITEM PART NO. DESCRIPTION -- 6-1977 KIT, Mulching, 36” Deck (Includes items 1 thru 4) 1 2-4869 BLADE, 18” Quad Edge (2) 2 4-4736 WELDMENT, Mulching Cover, 36” 3 9-0367 SCREW, 1/2-20 x 3/4” Hex Head Cap 4 9-0559 NUT, 1/2-20 Hex Jam NOTE: Kit # 6-1977 replaces Kit #6-1851. ITEM PART NO. DESCRIPTION -- 6-1220 KIT, Mulching, 41” Deck (Includes items 1 thru 4) 1 2-6407 BLADE, 21” Ninja, Quad Edge (2) 2 4-1372 WELDMENT, 41” Recycling Cover 3 9-0316 BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 5 (2) 4 9-0375 NUT, 5/16-18 Wing Lock (2) NOTE: Kit # 6-1220 is for 41” & 42” non-adjustable roller decks. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 30 MULCHING (Page 2 of 2) NUT (#9-0559) HEIGHT ADJUSTING SPACERS NINJA BLADE (2-4868: 32” & 48” DECKS) (2-6407: 41” DECK) (2-4869: 36” & 52” DECKS) (4-2808: 61” DECK) ITEM -1 2 3 4 PART NO. 6-1978 2-4868 4-4733 9-0367 9-0559 CHUTE SUPPORT LIP INSTALL OFFSET (UP) PORTION OF BLADE FACING BOTTOM SIDE BEVEL WASHER HOOK BLADE MOUNTING BOLT SCREW (#90367) MULCHING COVER (4-4733: 32” & 48” DECKS) (4-4736: 36” DECK) (4-4730: 52” DECK) (4-2699: 61” DECK) DESCRIPTION KIT, Mulching, 48” Deck (Includes items 1 thru 4) BLADE, 16.5” Quad Edge (3) WELDMENT, Mulching Cover, 32” SCREW, 1/2-20 x 3/4” Hex Head Cap NUT, 1/2-20 Hex Jam NOTE: Kit # 6-1978 replaces Kit #6-1854. ITEM -1 2 3 4 PART NO. 6-1979 2-4869 4-4730 9-0367 9-0559 DESCRIPTION KIT, Mulching, 52” Deck (Includes items 1 thru 4) BLADE, 18” Quad Edge (3) WELDMENT, Mulching Cover, 52” SCREW, 1/2-20 x 3/4” Hex Head Cap NUT, 1/2-20 Hex Jam NOTE: Kit # 6-1979 replaces Kit #6-1852. ITEM -1 2 3 4 PART NO. 6-1885 4-2808 4-2699 9-0367 9-0559 DESCRIPTION KIT, Mulching, 61” Deck (Includes items 1 thru 4) BLADE, 21” Ninja, Commercial (3) WELDMENT, 61” Baffle SCREW, 1/2-20 x 3/4” Hex Head Cap NUT, 1/2-20 Hex Jam MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 31 MULCHING 8 EXISTING BELT GUIDE 10 11 DECK 12 1 HEIGHT ADJUSTING SPACER 3 6 BEVEL WASHER 9 ITEM 2 1 4 PART NO. BLADE MOUNTING BOLT DESCRIPTION -- 6-1218 KIT, Mulching, 36” Deck (Includes items 1 thru 12) 1 2-4810 WELDMENT, 36” Recycling Baffle 2 2-4869 BLADE, 18” Quad Edge (2) 3 3-1123 CLAMP 4 9-0188 WASHER, 5/16” Flat 5 9-0559 NUT, 1/2-20 Hex Jam 6 9-0577 BOLT, 5/16-18 x 1-1/2” Square Neck Carriage, Grade 5 7 9-1502 BOLT, 1/2-20 x 3/4” Hex Washer Face w/Nylon Patch, Grade 5 8 2-6197 SPRING, Idler Return 9 3-5744 KNOB, 5/16-18 Wing 10 7-6935 SCREW, 5/16-18 x 1-1/2” Hex Head Cap 11 9-0585 NUT, 5/16-18 Hex Flange Lock 12 9-0717 NUT, 5/16-18 Hex Nyloc NOTE: Kit 6-1218 will fit the PRO 736 Deck. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 32 MULCHING 6 3 4 8 1 1 2 ITEM PART NO. DESCRIPTION -- 6-1219 KIT, Mulching, 48” Deck (Includes items 1 thru 8) 1 2-4811 WELDMENT, 48” Recycling Baffle 2 2-4868 BLADE, 16-1/2” Quad Edge (3) 3 3-1123 CLAMP 4 9-0188 WASHER, 5/16” Flat 5 9-0559 NUT, 1/2-20 Hex Jam 6 9-0577 BOLT, 5/16-18 x 1-1/2” Square Neck Carriage, Grade 5 7 9-1502 BOLT, 1/2-20 x 3/4” Hex Washer Face w/Nylon Patch, Grade 5 8 1-6324 T-KNOB, Plastic (accepts 5/16-18 nut) NOTE: Kit 6-1219 will fit the PRO 748 Deck. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 33 QUICK HITCH 9 10 13 1 8 2 3 14 4 This kit will fit SNAPPER PRO GEAR, PRO HYDRO and PRO 7 Series 4 MidSize Walk- Behind mowers. 12 7 6 5 11 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 6-3002 663854* 664014* 657384* 657383* 664022* 663601* 657385* 657632* 656797* 664028* 657382* 9-1304 9-0613 -- DESCRIPTION KIT, Quick Hitch (Incl. items 1 thru 11; 12 thru 14 not part of kit) HITCH, Male Quick SUPPORT, Parking Stand PIN, 1/4” x 1-11/16” Clevis PLATE, Spring STAND, Parking BUTTON, Snap (2) SPRING ASSEMBLY, Chain & Linch Pin GRIP, Handle LEVER, Male Hitch LATCH BOLT, 3/8-16 x 1” Hex Head, Grade 5 (2) NUT, 3/8-16 Hex Lock (2) PIN, 5/32 x 2” Cotter *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 34 46” DOZER BLADE 13 This kit will fit SNAPPER PRO GEAR and PRO HYDRO Mid-Size Walk- Behind mowers. 18 1 18 11 9 22 15 7 5 19 6 16 12 4 10 17 14 18 2 3 18 20 21 ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 5 10 PART NO. 6-3005 657501* 657291* 662963* 657290* 657293* 657289* 657488* 657871* 657489* 657500* 656229* 30089* 656783* 657483* 662999* 1-3550 1-3072 -9-0208 9-0187 9-0196 -- 8 DESCRIPTION KIT, 46” Dozer Blade (Incl. items 1 thru 15; 16 thru 22 not part of kit) WELDMENT, Blade BOX, Hitch HITCH, Female Quick PIN, Adjustment PIN, Skid Shoe (2) PIN, Pivot LOCK OUT, Trip Spring (2) PIN, 3/4” Dia. x 17-3/4” Long PIN, Trip Spring Lock-Out (2) SKID SHOE (2) EYE BOLT, 5/16-18 x 5” Long w/Hex Nut SPRING COUNTERWEIGHT (4) EDGE, Cutting ROD, Retaining ROLL PIN, 3/16” Dia. x 1” Long ROLL PIN, 1/4” Dia. x 1” Long HAIR PIN, 3,5mm x 65mm (3) BOLT, 5/16-18 x 1” Square Neck Carriage (6) WASHER, 5/16” Split Lock (6) NUT 5/16-18 Hex (6) ROLL PIN, 3/16” Dia. x 1-1/2” Long *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 35 DEBRIS BLOWER (page 1 of 6) This kit will fit SNAPPER PRO GEAR, PRO HYDRO and PRO 7 Series 4 MidSize Walk- Behind mowers. 13 24 1 23 20 19 17 15 18 19 14 8 26 21 7 29 27 19 17 25 19 6 22 18 9 10 11 12 4 28 28 16 29 5 3 2 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 36 DEBRIS BLOWER (page 2 of 6) ITEM PART NO. DESCRIPTION -- 6-3006 KIT, Debris Blower (Incl. items 1 thru 15) 1 662643* HOUSING 2 - 656069* 663099* 663099* BELT, SP Models with Kohler Engine BELT, PL7H Models BELT, Models without Kohler Engine 3 662648* STAND, Parking (2) 4 663601* SNAP BUTTON (2) 5 (see pg. 40) ASSEMBLY, Idler 6 656589* FLANGE, Bearing (2) 7 654532* BEARING with Locking Collar 8 655379* KEY, 1/4” Square x 1” long 9 662806* SHAFT 10 662956* BEARING 11 662713* BOX, Reduction 12 663851* PULLEY, MB50 13 662710* COVER, Belt 14 660924* KEY, 1/4” Square x 2-1/2” long 15 662926* COVER PIN, 1/4” Dia. x 1/2” long (2) 16 -- PIN, 3/16” Dia. x 2” Cotter (3) 17 -- BOLT, 3/8-16 x 1-1/4” Hex (4) 18 -- WASHER, 3/8” Lock (2) 19 9-1595 20 -- BOLT, 3/8-16 x 8-1/2” Hex Head (2) 21 9-0130 NUT, 3/8-16 Hex WASHER, 7/16” Flat (13) 22 9-0208 BOLT, 5/16-18 x 1” Square Neck Carriage (5) 23 -- 24 9-0196 NUT, 5/16-18 Hex, Grade 5 or B (7) 25 9-0449 NUT, 7/16-14 (4) 26 -- WASHER, 7/16” Lock (4) 27 -- BOLT, 7/16-14 x 1-1/4” Hex (4) 28 9-0585 29 -- WASHER, 5/16” Lock (7) NUT, 5/16-18 Hex Flange Lock, Grade 5 or B (14) HAIR PIN, 2,5mm x 40mm (2) NOTE: Items 16 thru 29, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 37 DEBRIS BLOWER (page 3 of 6) 28 32 16 31 45 30 42 46 54 53 43 55 35 47 33 34 44 47 51 52 56 37 38 36 37 39 50 50 22 49 48 40 41 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 38 DEBRIS BLOWER (page 4 of 6) ITEM PART NO. DESCRIPTION -- 6-3006 KIT, Debris Blower (continued) (Incl. items 30 thru 47) 30 662639* HOUSING, Impeller (weldment) 31 662644* IMPELLER (weldment) 32 662646* COVER, Intake (weldment) 33 663096* BRACKET, Rotation 34 661508* PLATE, Retaining 35 661498* SPACER, Rotation (4) 36 657331* WORM 37 657335* BUSHING, Plastic, 1-5/16” long (2) 38 657338* RING, Nylon 39 662672* NOZZLE, Air Blast 40 662734* DEFLECTOR 41 657309* KNOB, 5/16” 42 654988* NUT, 1” Castle 43 663053* SUPPORT, Wheel (weldment) 44 660953* ASSEMBLY, Wheel & Tire 45 662825* CAP (2) 46 662737* SPACER (for wheel support) 47 662822* SPACER (for wheel) (2) 48 9-0316 BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 5 (4) 49 9-1493 NUT, 5/16-18 Hex Nyloc 50 -- WASHER, 11/32” Diameter (2) 51 -- WASHER, 1/4” Lock (12) 52 9-0063 NUT, 1/4-20 Hex, Grade 5 or B (9) 53 -- BOLT, 1/4-20 x 1” Hex Head (9) 54 -- LINCHPIN, 5/16” Diameter 55 -- BOLT, 5/8-18 x 5-1/2” Hex 56 -- NUT, 5/8-18 Hex Nyloc NOTE: Items 48 thru 56, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 39 DEBRIS BLOWER (page 5 of 6) 20 19 60 17 58 19 74 59 77 57 19 60 19 19 73 76 19 62 19 62 19 17 19 63 49 17 74 19 75 19 64 61 65 49 76 17 66 19 72 71 69 68 78 70 67 78 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 40 DEBRIS BLOWER (page 6 of 6) ITEM PART NO. DESCRIPTION -- 6-3006 KIT, Debris Blower (continued) (Incl. items 57 thru 72) 57 662969* BRACKET, Left Idler (weldment) 58 662649* BRACKET, Right Idler (weldment) 59 663011* SPRING 60 663014* BRACKET, Adjusting (2) 61 663038* ROD, Adjusting 62 659519* IDLER PULLEY (2) 63 663050* BELT GUIDE (short bend) 64 663805* EYE BOLT, 5/16-18 65 663043* SPACER, Idler 66 663051* BELT GUIDE (long bend) 67 663962* SUPPORT, Rotation Handle (weldment) 68 657390* GROMMET 69 656797* GRIP, Handle 70 663749* HANDLE, Rotation 71 658025* TUBE, Handle 72 663600* BUTTON, Snap 73 9-1299 NUT, 3/8-16 Hex Nyloc 74 -- WASHER, 3/8” Lock (3) 75 9-0629 BOLT, 3/8-16 x 2-1/4” Hex 76 9-0390 WASHER, 3/8” Internal Tooth Lock (2) 77 -- BOLT, 3/8-16 x 2-3/4” Hex 78 -- BOLT, 3/8-16 x 1-1/4” Square Neck Carriage (2) NOTE: Items 73 thru 78, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 41 47” ROTARY BROOM (page 1 of 6) This kit will fit SNAPPER PRO GEAR, PRO HYDRO and PRO 7 Series 4 MidSize Walk- Behind mowers. 8 20 21 17 28 2 27 9 18 26 21 15 20 14 21 22 14 13 16 19 6 7 1 7 5 22 21 14 14 13 10 4 25 13 23 22 11 12 24 14 21 14 MANUAL No. 06929 3 COMMERCIAL WALK-BEHIND ACCESSORIES 42 47” ROTARY BROOM (page 2 of 6) ITEM PART NO. DESCRIPTION -- 6-3007 KIT, 47” Rotary Broom (Incl. items 1 thru 19) 1 663505* HOUSING 2 663539* DISC, Brush Retaining 3 663734* WASHER, Chain Idler 4 663737* SPACER, Chain Idler 5 663840* ASSEMBLY, Left Gauge Wheel 6 663841* ASSEMBLY, Right Gauge Wheel 7 663537* SCREW, Locking (2) 8 663492* BRUSH, Zigzag (14) 9 657999* RING, Spacer (13) 10 663845* SPROCKET, Driven (40B48) 11 663866* CHAIN #40 w/Connecting Link 12 661175* IDLER, Chain 13 654532* BEARING w/Locking Collar (5) 14 656589* BEARING FLANGE (3 holes) (6) 15 663538* SUPPORT, Brush 16 663654* DRIVE SHAFT 17 663655* DRIVEN SHAFT 18 663656* ANCHOR NUT, 5/16-18 (3) 19 654643* KEY, 1/4” Square x 1-1/4” (3) 20 -- BOLT, 5/16-18 x 1” Hex (7) 21 -- WASHER, 5/16” Lock (24) 22 -- BOLT, 5/16-18 x 3/4” Hex (14) 23 -- BOLT, 3/8-16 x 2” Hex (2) 24 -- WASHER, 3/8” Lock (7) 25 -- NUT, 3/8-16 Hex (3) 26 9-0196 NUT, 5/16-18 Hex (11) 27 -- BOLT, 1/4-20 x 1-1/2” Hex 28 -- NUT, 1/4-20 Stover NOTE: Items 20 thru 28, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 43 47” ROTARY BROOM (page 3 of 6) ITEM 1 ON PREVIOUS PAGE 42 24 41 19 21 68 69 64 33 64 48 34 57 52 20 40 32 35 61 50 63 58 36 70 59 62 60 47 44 31 43 29 22 45 21 53 56 55 46 39 13 38 66 26 30 64 63 65 54 37 26 21 41 19 53 49 46 51 13 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 44 47” ROTARY BROOM (page 4 of 6) ITEM -29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 --52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 PART NO. 6-3007 663549* 663551* 663640* 663663* 663544* 663540* 663660* 663550* 663857* 663741* 663722* 659824* 654732* 663842* 663843* 663844* 657989* 654787* 656797* 663804* 656135* 663946* 663332* 664024* 664024* -9-0316 ----9-0250 -9-0449 --9-0122 -9-0395 -9-0201 --9-1493 DESCRIPTION KIT, 47” Rotary Broom (continued) (Incl. items 29 thru 51) HITCH, Female ANGLE ADJUSTMENT HANDLE COUPLER, Upper GUARD, Chain DRIVE SHAFT, Chain SPROCKET GUARD, Upper Pulley SHAFT, Pulley TENSIONER, Twin Belt (2) BELT GUIDE BUSHING, Upper KEY, 1/4” Square x 1-1/2” long (2) PULLEY, Twin Belt (2MA60) PULLEY, Twin Belt (2MA40) V-BELT (AX26) (2) SPRING, Torsion BEARING FLANGE (2 holes) (4) HANDLE, Plastic GEARBOX DRIVE PULLEY (MB65) GUARD, Rear Pulley DRIVE BELT, SP Models with Kohler Engine (B-57) DRIVE BELT, PL7H Models (B-52) DRIVE BELT, SP Models w/o Kohler Engine (B-52) ROLL PIN, 1/4” Dia. x 1-1/4” long BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 5 (4) BOLT, 3/4-10 x 2-3/4” Hex NUT, 3/4-10 Stover ROLL PIN, 3/16” Dia. x 1” BOLT, 7/16-14 x 1-3/4” Hex WASHER, 1/2” Flat WASHER, 7/16” Lock NUT, 7/16-14 Hex BOLT, 7/16-14 x 1-1/4” Hex NUT, 7/16-14 Hex Nyloc WASHER, 3/8” Flat (6) KNOB, 5/16-18 (2) WASHER, 5/16” External Tooth Lock (2) NUT, 5/16-18 Stover (2) SET SCREW, 5/16-18 x 5/16” (2) BOLT, 5/16-18 x 2-3/4” Hex NOTE: Items 52 thru 70, shown on BOLT, 3/8-16 x 4-1/2” Hex the previous page, are not NUT, 5/16-18 Hex Nyloc (2) part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 45 47” ROTARY BROOM (page 5 of 6) 53 100 51 23 101 76 73 71 63 74 21 72 75 26 24 24 52 25 102 81 86 25 51 20 92 102 87 77 84 82 89 78 81 88 79 85 90 94 91 80 83 77 80 82 103 103 93 104 105 97 96 104 95 104 106 99 98 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 46 47” ROTARY BROOM (page 6 of 6) ITEM -71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 -97 98 99 100 101 102 103 104 105 106 PART NO. 6-3007 657876* 663870* 663872* 663871* 663867* 661976* 663915* 661739* 661144* 661730* 661728* 661734* 661738* 660063* 661729* 661737* 661736* 661731* 661735* 661732* 661733* 663909* 663855* 663916* 663534* 663535* 663536* 658578* 654106* 661306* 9-0598 9-0730 ---9-0753 -- DESCRIPTION KIT, 47” Rotary Broom (continued) (Incl. items 71 thru 99) PULLEY, Idler LEVER SUPPORT, Lever BUSHING SPRING, Torsion WASHER, 13/32” Dia. Hole CASING (2 halves) PLUG, 3/8” O-RING OIL SEAL (2) BEARING (2) SNAP RING (3) GEAR, Z25 M3,5 PARALLEL KEY, A8 x 7 x 25 SHAFT SHIM 25.6 x 0.8 SHIM 25.6 x 1.0 SHIM 25.6 x 0.7 PINION 29 M3.5 BEARING SHIM 25.6 x 0.6 BREATHER PLUG, Oil Level BEARING SUPPORT (2) BRACKET, Right Hand Wheel BRACKET, Left Hand Wheel (not shown) NYLON WASHER, 0.630” I. D. (2) GREASE FITTING, 1/4” NF (2) WHEEL, 6” Dia. x 2” (2) WASHER, 5/16” Flat BOLT, 3/8-16 x 1-3/4” Hex BOLT, M8 x 45 (8) NUT, M8 Hex (8) WASHER, 11/16” Flat (8) PIN, 3/16 x 1-1/2” Cotter (2) PIN, 1/4 x 1-1/2” Cotter (2) NOTE: Items 100 thru 106, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 47 40” TWO STAGE SNOWBLOWER (page 1 of 8) 23 6 25 8 5 2 26 9 22 3 5 17 7 4 30 10 33 34 25 26 28 11 29 24 20 28 27 12 25 27 26 29 19 15 27 25 1 26 25 13 31 21 13 26 32 15 14 28 This kit will fit SNAPPER PRO GEAR, PRO HYDRO and PRO 7 Series 4 MidSize Walk- Behind mowers. 18 27 31 25 16 26 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 48 40” TWO STAGE SNOWBLOWER (page 2 of 8) ITEM PART NO. DESCRIPTION -- 6-3004 KIT, 40” Two Stage Snowblower (Incl. items 1 thru 21) 1 662878* FRAME 2 662881* AUGER, Right Hand (weldment) 3 662882* AUGER, Left Hand (weldment) 4 663030* ASSEMBLY, Worm Gear (see page 54 for components) 5 661667* BEARING (2) 6 662879* SUPPORT, Worm Gear 7 663025* SHAFT, Output 8 655967* KEY, Woodruff 9 658576* SHEAR BOLT, 5/16-18 x 2-1/4” (2) 10 658574* SHEAR BOLT, 1/4-20 x 1” 11 655874* SHEAR PLATE, Fan Adapter 12 662968* ASSEMBLY, Fan 13 656589* FLANGE, Bearing (2) 14 654532* BEARING, w/Locking Collar 15 655379* KEY, 1/4” Square x 1” (2) 16 663064* SPROCKET, 40B38 17 659591* CUTTING EDGE 18 659717* SKID SHOE (2) 19 663859* ASSEMBLY, Reduction Box (see page 52 for components) 20 --- 659605* 662893* 662893* BELT, SP Models w/Kohler Engine BELT, PL7H Models BELT, SP Models w/o Kohler Engines 21 656135* PULLEY BK67 22 2-7175 BOLT, 5/16-18 x 1-1/2” Hex (2) 23 9-0196 NUT, 5/16-18 Hex (2) 24 -- BOLT, 5/16-18 x 3/4” Hex (2) 25 -- WASHER, 5/16” Lock (17) 26 9-0197 NUT, 5/16-18 Hex (17) 27 9-0122 WASHER, 3/8” Flat (10) 28 9-0208 BOLT, 5/16-18 x 1” Square Neck Carriage (7) 29 9-0316 BOLT, 5/16-18 x 3/4” Square Neck Carriage, Grade 5 (10) 30 -- NUT, 5/16-18 Stover (6) 31 -- SOCKET CAPSCREW, 5/16-18 x 5/16” (2) 32 -- BOLT, 3/8-16 x 1-1/4” Hex (4) 33 -- NUT, 5/16-18 Stover 34 7-6978 NUT, 1/4-20 Hex Nyloc NOTE: Items 22 thru 34, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 49 40” TWO STAGE SNOWBLOWER (page 3 of 8) 38 37 52 46 51 50 36 48 49 47 35 40 41 39 57 or 53 52 45 42 43 55 56 56 53 55 44 54 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 50 40” TWO STAGE SNOWBLOWER (page 4 of 8) ITEM -- PART NO. 6-3004 DESCRIPTION KIT, 40” Two Stage Snowblower (continued) (Incl. items 35 thru 45) 35 662889* HITCH, Female Quick 36 662926* PIN, 1/4” Dia. x 1/2” (2) 37 663960* GUARD, Belt 38 661832* KNOB, 5/16-18 39 657319* ASSEMBLY, Chute, Base Knobs & Decal 40 657309* KNOB, 5/16-18 (2) 41 658467* WASHER, 11/32” Flat (nylon) (2) 42 658468* WASHER, 7/16” Flat (nylon) (2) 43 657308* HAND GUARD 44 657338* RING, Nylon 45 657333* PLATE, Retaining (4) 46 9-1304 BOLT, 3/8-16 x 1” Hex, Grade 5 (2) 47 9-0646 BOLT, 1/2-13 x 1” Hex, Grade 5 (2) 48 -- HAIR PIN, 2mm x 41mm (2) 49 -- WASHER, 1/2” Lock (2) 50 9-0258 NUT, 1/2-13 Hex (2) 51 -- WASHER, 3/8” Lock (2) 52 9-0577 BOLT, 5/16-18 x 1-1/2” Square Neck Carriage (2) 53 -- BOLT, 1/4-20 x 3/4” Hex (4) 54 9-0598 WASHER, 5/16” Flat (2) 55 -- WASHER, 1/4” Lock (2) 56 9-0063 NUT, 1/4-20 Hex, Grade 5 or B (2) 57 -- BOLT, 1/4-20 x 1/2” Hex (6) NOTE: Items 46 thru 57, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 51 40” TWO STAGE SNOWBLOWER (page 5 of 8) 62 58 63 64 65 59 60 61 69 67 68 73 73 66 77 76 79 72 80 74 78 71 73 73 70 78 79 81 79 77 74 75 78 79 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 52 40” TWO STAGE SNOWBLOWER (page 6 of 8) ITEM -- PART NO. 6-3004 DESCRIPTION KIT, 40” Two Stage Snowblower (continued) (Incl. items 58 thru 75) 58 657335* BUSHING, 1-5/16” long (plastic) 59 657331* WORM, Rotation 60 657336* BUSHING, 1-11/16” long (plastic) 61 657329* SUPPORT, Rotation Worm 62 664006* TUBE, Handle 63 663600* BUTTON, Snap 64 664007* HANDLE, Rotation 65 656797* GRIP, Handle 66 663964* SUPPORT, Rotation Handle 67 657390* GROMMET 68 663973* TUBE, Extension (for models with Briggs Vanguard engine) 69 663974* BRACKET, Support (for models with Briggs Vanguard engine) 70 662880* REDUCTION BOX 71 663054* GUIDE, Pulley (2) 72 657251* ASSEMBLY, Sprocket with Shaft 73 656589* FLANGE, Bearing (4) 74 657294* BEARING w/Set Screws (2) 75 663247* CHAIN 76 -- BOLT, 3/8-16 x 1-1/4” Square Neck Carriage (2) 77 9-0605 BOLT, 5/16-18 x 5/8” Square Neck Carriage, Grade 5 (4) 78 -- WASHER, 5/16” Lock (6) 79 9-0196 NUT, 5/16-18 Hex, Grade 5 or B (8) 80 9-0208 BOLT, 5/16-18 x 1” Square Neck Carriage (2) 81 9-0390 WASHER, 3/8” Internal Tooth Lock (4) NOTE: Items 76 thru 81, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 53 40” TWO STAGE SNOWBLOWER (page 7 of 8) 105 87 83 88 84 90 105 106 86 85 86 83 92 87 95 92 89 94 91 82 93 107 108 114 98 97 112 96 81 109 99 114 110 114 115 99 100 111 113 104 114 115 103 111 114 102 MANUAL No. 06929 81 101 113 COMMERCIAL WALK-BEHIND ACCESSORIES 54 40” TWO STAGE SNOWBLOWER (page 8 of 8) ITEM -- PART NO. 6-3004 DESCRIPTION KIT, 40” Two Stage Snowblower (continued) (Incl. items 82 thru 104) 82 663239* CASING, Right Hand 83 656090* PLUG, 1/8” NPT (2) 84 654927* BREATHER, 1/8” NPT 5 PSI 85 663240* CASING, Left Hand 86 661147* BEARING (2) 87 663241* SEAL (2) 88 663245* PIN, 3/16 x 1/2” Long Dowel (2) 89 661150* FROST CAP 90 663242* BRASS GEAR, 8 DP 4 LH 91 661161* INPUT SHAFT 92 663234* BEARING 93 663243* PIN, 5/16 x 1-1/4” Long Spring 94 663244* SEAL 95 663238* WORM, 8 DP 4 LH 96 663040* BRACKET, Left Idler 97 663039* BRACKET, Right Idler 98 656040* SPRING 99 659519* PULLEY, Idler (2) 100 663050* BELT GUIDE (short bend) 101 663051* BELT GUIDE (long bend) 102 662896* TENSION ROD 103 663043* SPACER 104 663074* EYE BOLT, 5/16-18 x 5” 105 -- NUT, 5/16-18 Hex Lock (6) 106 9-0370 BOLT, 5/16-18 x 1-3/4” Hex (2) 107 -- BOLT, 5/16-18 x 2-1/4” Hex (4) 108 -- BOLT, 1/2-13 x 8” Hex 109 -- BOLT, 3/8-16 x 2-3/4” Hex 110 -- NUT, 1/2-13 Hex Nyloc 111 9-1809 PIN, 1/8 x 1-1/4” Cotter (2) 112 9-1595 WASHER, 7/16” Flat (4) 113 9-0130 NUT, 3/8-16 Hex (2) 114 9-1493 NUT, 5/16-18 Hex Nyloc (2) 115 9-0623 BOLT, 3/8-16 x 2-1/4” Hex NOTE: Items 105 thru 115, shown on the previous page, are not part of this kit. *RAD Technologies, Inc. part number (other numbers are Snapper) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 55 BELT TENSION REDUCTION 2 * * *idler pulley 5 4 * *thick spacer 1 *thin spacer * 3 ITEM -1 2 3 4 5 *existing components and hardware (re-use) DESCRIPTION KIT, Belt Tension Reduction (Includes items 1 thru 5) BOLT, 3/8-16 x 1” Hex Flange Lock, Grade 5 RETAINER, Belt This kit will reduce the belt tension on BRACKET, Idler Deck Model SP360 on PRO Gear and PRO NUT, 3/8-16 Hex Nyloc Hydro Mid Size Commercial mowers. WASHER, 3/8” Flat (2) PART NO. 6-1868 2-7198 3-5656 3-6429 9-1299 9-0122 IDLER PULLEY ALIGNMENT 1 Blade Clutch Rod PRO 748 Model * * * 4 * * 2 * 4 5 * * This kit will fit PRO 736 and PRO 748 decks, and will improve blade brake engagement and adjustment when operating in lowest cutting position. On 748 models only it will also be necessary to swap out engine drive belt with part number 2-4511 (order separately). ITEM -1 2 3 4 5 PART NO. 6-1205 2-4761 3-3709 9-0590 9-0905 9-1178 * * * 3 * PRO 736 Model *existing components and hardware (re-use) DESCRIPTION KIT, Improved Belt Alignment (Includes items 1thru 5) PULLEY, 5” Idler LINK, Blade Assist BOLT, 3/8-16 x 3” Hex, Grade 5 WASHER, Flat (Case Hardened) (2) BOLT, 5/16-18 x 1-3/4” Square Neck Carriage , Grade 2 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 56 ENGINE FRAME BRACE Rear Deck, Engine Base (reference) * (Remove & Discard) 1 * Existing hardware (re-use) * ITEM PART NO. -- 6-1871 1 4-2663 * DESCRIPTION KIT, Engine Frame Brace (Includes item 1) WELDMENT, Engine Frame Brace MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 57 BACKSIDE IDLER 43 35 23 6 45 39 38 7 41 23 38 HANDLE, PISTOL GRIP 42 31 40 35 44 46 22 7 13 34 39 31 23 1 36 23 15 29 31 17 33 9 19 11 22 32 21 9 12 22 4 26 32 20 22 18 11 BRAKE ROD 30 22 22 27 22 28 BELLCRANK 5 9 31 24 25 16 10 2 NOTE: Un-numbered components shown are existing items which should be re-used. 10 MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 58 BACKSIDE IDLER ITEM -1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 PART NO. 6-1207 2-4708 2-4713 2-4714 2-4891 3-3718 9-0548 9-0583 5-2991 1-0739 2-2768 2-4707 2-4717 3-3713 3-3714 3-3715 3-3720 3-3726 4-1357 4-1358 4-1359 4-1360 7-6979 9-0038 9-0122 9-0136 9-0206 9-0585 9-0588 9-0637 9-0665 9-0747 7-6998 1-2306 1-6231 2-4590 2-4607 9-0563 9-1294 2-4710 3-3719 3-3725 3-3687 2-4589 3-3798 9-1175 9-1176 DESCRIPTION KIT, Backside Dual Idler (Pistol Grip) (Includes items 1 thru 46) PULLEY, 3-1/4” (transmission out) (2) FENDER, Left (not shown) FENDER, Right (shown) BELT, PRO 7 Traction (2RA Section, 50.96” Effective Length) FLANGE, Output (2) SCREW, 1/4-20 x 1” Hex Head Cap, Grade 5 NUT, 1/4-20 Hex Flange Lock (2) ASSEMBLY, Tank Bracket (Includes items 9 thru 32) RING, 5/8” External Retaining (4) STUD, Fender Mount (3/8-16 thread) (2) PULLEY, 3-1/4” Idler (4) SPRING, Extension (2) LINK, Short (2) LINK, Long Right Hand (not shown) LINK, Long Left Hand (shown) ARM, Brake (2) FORM, Tank Bracket WELDMENT, Idler Lower Left/Upper Right (2) WELDMENT, Upper Left/Lower Right (2) WELDMENT, Idler Pivot Right Hand WELDMENT, Idler Pivot Left Hand NUT, 3/8-16 Hex Nyloc (12) PIN, 3/32 x 1” Cotter (6) WASHER, 3/8” Flat (2) BOLT, 3/8-16 x 3/4” Square Neck, Grade 2 (2) SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 5 (2) NUT, 5/16-18 Hex Flange Lock (2) SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5 (2) SCREW, 3/8-16 x 2-1/2” Hex Head Cap, Grade 5 (2) NUT, 3/8-16 Hex Jam (2) BOLT, 3/8-16 x 1” Round Head Square Neck, Grade 5 (12) FITTING, Grease, 1/4-28 Thread (4) BUSHING, .381 I. D. Flange (2) PIN, #13 Hair (2) PIN, Reverse PG (2) SWIVEL, Brake Link PM (2) SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (2) WASHER, 1/4” Flat (2) ROD, Traction, Pistol Grip (2) STRAP, Brake Pistol Grip, Left Side STRAP, Brake Pistol Grip, Right Side LEVER, Reverse, Pistol Grip CHAIN, Reverse, Pistol Grip ARM, Reverse NUT, M6 Hex Lock SCREW, M6 x 14 Hex Head Cap NOTE: Kit 6-1207 will fit model PP71250KW (Pistol Grip) PRO Commercial; Mower MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 59 BACKSIDE IDLER 9-0548 9-1175 2-4589 4-1375 2-4855 9-0548 3-3721 3-3798 3-3655 7-6978 3-3802 7-6934 3-3687 9-1176 ITEM -42 43 44 45 46 47 48 49 PART NO. 6-1208 4-1375 4-1379 2-4855 3-3655 3-3802 7-6934 9-0717 7-6978 4-1379 2-4711 9-0717 DESCRIPTION KIT, Backside Dual Idler (Pistol Grip) (Includes items 1 thru 41 of Kit #6-1207, shown on pages 58 & 59, plus the following items): WELDMENT, Guide WELDMENT, Support ROD, Reverse STRAP, Reverse LEVER, Reverse SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 5 (2) NUT, 5/16-18 Hex Nyloc (2) NUT, 1/4-20 Hex Nyloc (2) NOTE: Kit 6-1208 will fit model PP7140KWV (Pistol Grip) PRO Commercial; Mower ITEM -39 40 41 42 43 44 45 PART NO. 6-1209 2-4711 3-3687 3-3721 2-4589 3-3798 9-1175 9-1176 DESCRIPTION KIT, Backside Dual Idler (Loop Handle) (Includes items 1 thru 38 of Kit #6-1207, shown on pages 58 & 59, plus the following items): ROD, Traction Loop (2) LEVER, Reverse STRAP, Brake Loop (2) CHAIN, Reverse ARM, Reverse NUT, M6 Hex Lock SCREW, M6 x 14 Hex Head Cap NOTE: Kit 6-1209 will fit model PL71250KW (Loop Handle) PRO Commercial; Mower ITEM -39 40 41 42 43 45 46 47 48 49 50 PART NO. 6-1210 2-4711 3-3721 4-1375 4-1379 2-4855 3-3655 3-3802 7-6934 9-0717 7-6978 9-0548 DESCRIPTION KIT, Backside Dual Idler (Loop Handle) (Includes items 1 thru 38 of Kit #6-1207, shown on pages 58 & 59, plus the following items): ROD, Traction Loop (2) STRAP, Brake Loop (2) WELDMENT, Guide WELDMENT, Support ROD, Reverse STRAP, Reverse LEVER, Reverse SCREW, 5/16-18 x 3/4”, Grade 5 (2) NUT, 5/16-18 Hex Nyloc (2) NUT, 1/4-20 Hex Nyloc (2) SCREW, 1/4-20 x 1” Hex Head Cap, Grade 5 (2) NOTE: Kit 6-1210 will fit model PL7140KWV (Loop Handle) PRO Commercial; Mower MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 60 GAS TANK 2 11 8 7 1 9 11 4 3 5 6 ITEM 10 PART NO. DESCRIPTION -- 6-0802 KIT, Gas Tank Retrofit (4 Gallon) (Includes items 1 thru 11) 1 7-6535 GAS CAP w/Gage 2 7-7282 GAS TANK w/Decals 3 7-6532 TANK BAND, Short 4 7-6563 TANK BAND, Long 5 7-6966 CLAMP, Hose 6 7-6491 SHUT-OFF, Gas Line 7 7-6537 SADDLE PAD (2) 8 9-0563 SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (2) 9 7-6392 SADDLE, Retrofit 10 7-6979 NUT, 3/8-16 Hex Nyloc (2) 11 7-7345 PAD, Gas Tank (4) NOTE: Kit 6-0802 will fit PRO Heavy Duty Commercial Walk-Behind Mowers MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 61 INTERLOCK SWITCH UPDATE 2 5 4 TRACTION ROD 8 10 6 3 7 ITEM -1 2 3 4 5 6 7 8 9 10 PART NO. 6-0896 2-3405 2-3406 2-3407 2-3408 1-5668 7-7873 7-6856 9-0078 7-6978 9-0598 1 9 DESCRIPTION KIT, Interlock Switch Update (Includes items 1 thru 10) TAB, Traction Switch (2) PLATE, Switch NOTE: Kit 6-0896 will fit 32”, 36” and 48” HARNESS Steel Deck PRO Mowers. SWITCH, SP/NC Gray SWITCH, NO Black (2) SCREW, #12-14 x 1/2” Hex Washer Face, Slotted (6) TIE, Plastic (4) BOLT, 1/4-20 x 1-1/4” Square Neck Carriage (2) NUT, 1/4-20 Hex Nyloc (2) WASHER, 1/4” Flat (2) BELT ANTI-VIBRATION 1 2 ITEM -1 2 PART NO. 6-3104 7-2418 2-7132 DESCRIPTION KIT, Belt Anti-Vibration GUIDE, Belt 4.3” PULLEY, 4” Cast NOTE: Kit 6-3104 will fit PRO Mowers With SP480 and SPA480 decks. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 62 REVERSE THROTTLE INTERLOCK 6 1 2 4 3 7 9 8 ITEM -1 2 3 4 5 6 7 8 9 PART NO. 6-1783 1-5707 3-4466 2-7225 3-4459 2-8516 9-1603 9-1495 9-1290 9-1631 5 DESCRIPTION KIT, Reverse Throttle Interlock (Includes items 1 thru 9) SWITCH, Detent NO BRACKET, Reverse Switch SWITCH, Single Pole BRACKET, Reverse Throttle HARNESS, Reverse Throttle Wire NUT, 1/4-20 Hex Nyloc (2) SCREW, 1/4-20 x 3/4” Hex Head Cap, Grade 5 (2) NUT, #10-24 Hex Nyloc (2) SCREW, #10-24 x 1/2” Hex Head Cap (2) NOTE: Kit 6-1783 will fit PRO 7 Series 1 & 2 Mowers. It is used to convert 1994 & earlier models to 1995 & later models. TAPERLOCK PULLEY 1 NOTE: Kit 6-0899 will fit on PRO Mowers with 48” decks to replace pulley #7-6648. When used properly the component pulley and bushing securely attach to the spindle and will not “float” up or down. on the shaft. 2 ITEM -1 2 PART NO. 6-0899 1-9101 2-3381 DESCRIPTION KIT, Taperlock Pulley 48 (Includes items 1 & 2) PULLEY, Taperlock BUSHING, Taperlock MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 63 SHIFT ARM EXTENSION 1 NOTE: Kit 6-3136 will fit electric start PRO Hydro Series 0 mowers. ITEM -1 2 3 PART NO. 6-3136 7-3059 9-0969 9-1099 DESCRIPTION KIT, Shift Arm Extension (Includes items 1 thru 3) PLATE, Extension (2) BOLT, 1/4-20 x 1/2” Flat Head Short Square Neck (2) NUT, 1/4-20 Hex Center Lock, Grade B (2) DRIVEN DISC REPLACEMENT NOTE: This kit will fit models Y30080, Y30120 & Y41120 MidDuty Commercial Walk-Behind mowers. Chain Case (Reference) 5 6 3 4 8 9 2 1 7 Clamps (Reference) ITEM -1 2 3 4 5 6 7 8 9 PART NO. 6-1077 1-7339 1-9049 5-2337 1-7226 1-5163 9-0692 1-1731 9-0583 9-0524 Hex Shaft (Reference) DESCRIPTION KIT, Driven Disc Replacement (Includes items 1 thru 9) SHIFT LEVER, Lower COVER, Shaft HUB ASSEMBLY DRIVEN DISC KEY, 3/32 x 1/2” Woodruff (#304) WASHER, 5/16” Flat WASHER, 3/8” Belleville NUT, 1/4-20 Hex Flange Lock (4) NUT, 3/8-24 Hex, Grade C MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 64 OIL FILTERS 3 5 1 2 NOTE 1: Kit #7-7288 is only for Kawasaki 12.5 HP engines. 4 NOTE 2: The oil filter 7-7355 is used on a multitude of PRO commercial walkbehind mower engines. On Hydro machines a separate oil filter (part number 2-7164) is used in the hydraulic system. 4 6 ITEM PART NO. DESCRIPTION 1 7-7288 KIT, Oil Filter 2 -- BASE, Oil Filter 3 7-7355 FILTER, Oil 4 7-6975 NUT, M8-1.25, Hex Nyloc (2) 5 -- BOLT, M8 x 1.25 x 45 Hex (2) 6 -- SEAL, Oil ACCESSORIES, 12 VOLT, 3 AMP BATTERY 2 3 ITEM 1 2 3 PART NO. 6-0974 9-0411 1-2688 DESCRIPTION KIT, Battery SCREW, #10-24 x 1/2” Hex Head Cap (2) NUT, #10-24 Hex Twin “Whiz” Lock (2) MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 65 EXHAUST MUFFLERS & HEAT SHIELDS 24 23 16 21 26 13 27 15 14 12 26 25 1 26 28 30 7 18 31 17 8 32 33 34 33 6 9 23 11 10 29 29 35 22 36 24 19 2 37 20 MANUAL No. 06929 3 38 COMMERCIAL WALK-BEHIND ACCESSORIES 66 EXHAUST MUFFLERS & HEAT SHIELDS ITEM 1 2 3 4 5 6 7 8 9 10 -11 12 13 14 15 16 17 PART NO. 7-6507** 7-7717* 1-7163 2-8959 2-8757 3-4618 3-4653 2-8958 4-6755 2-6881 3-3572 3-3489 3-2898 7-6384** 7-6503** 7-6569** 7-6570** 4-3813 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 -33 4-3814 7-7716* 7-6355* 7-7762** 2-3515 7-6934** 9-0187** 9-0548** 9-0052** 9-0072** 7-6932** 9-0717 9-1631 9-0010 9-1267 9-1290 9-1649 -34 35 36 37 38 9-1581 9-0206 7-7692 9-0517 7-7690* 9-1113 DESCRIPTION MUFFLER, Super Lo-Tone (Briggs 11 & 12 HP) MUFFLER, Round Lo-Tone MUFFLER GROUP (Kohler 14HP) MUFFLER, Kohler V-Twin (SPLH231KHE only) (not shown) MUFFLER, Briggs 16HP V-2 (PRO 7) (not shown) SHIELD, Heat (Kawasaki and Kohler engines only; replaces 3-3319) SHIELD, Heat (Briggs only) SHIELD, Heat (SPLH231KHE only) SHIELD, Heat (Kohler 15HP only) SHIELD, Heat (Kohler 14HP & Kawasaki 14HP) SHIELD, Heat (Kawasaki 12.5HP) SHIELD, Heat (Kawasaki 12.5HP) SHIELD, Heat (Kawasaki) BRACKET, Muffler Mount (Briggs 12 HP) CLAMP, Muffler w/Bolt & Nut TUBE, Exhaust Assembly GASKET, Exhaust ASSEMBLY, Clamp (Includes Clamp, U-Bolt, 2 Split Lock Washers and 2 Hex Nuts) (used on SPLH231KHE only) ELBOW, Exhaust (used on SPLH231KHE only) RING, Locking DEFLECTOR, Side Out SPACER, Muffler Bracket SPACER (2) SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 5 (2) WASHER, 5/16” Split Lock SCREW, 1/4-20 x 1” Hex Head Cap, Grade 5 WASHER, 1/4” Split Lock (6) SCREW, 1/4-20 x 5/8” Hex Head Cap, Grade 5 (4) SCREW, 1/4-20 x 3/4” Hex Head Cap NUT, 5/16-18 Hex Nyloc SCREW, #10-24 x 1/2” Hex Head Machine (Briggs engine only) WASHER, #10 Flat NUT, #10-24 Hex Center Lock (Briggs engine only) NUT, #10-24 Hex Nyloc SCREW, #8-18 x 9/16” Hex Washer Self-Tap (4 for SPLH231KHE; 2 for Briggs; 4 for Kohler 18HP) SCREW, #8-18 x 1/2” Hex Head, Self-Tap SCREW, 5/16-18 x 3/4” Hex Head Cap, Grade 5 SCREW, M8 1.25 x .25 Hex Head Cap (2) WASHER, 3/8” Flat (2) SCREW, Muffler Deflector SCREW, M6 x 16mm Hex Cap (2) *NOTE: For Briggs and Stratton 8HP engines only. **NOTE: For Briggs and Stratton 11 & 12HP engines only. MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES 67 Parts Manual for COMMERCIAL WALK-BEHIND ACCESSORIES COPYRIGHT © 2002 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 06929 (IR, 12/02/02) 68 Printed in U.S.A.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Mulch capability for converting grass clippings into nutrient-rich mulch.
- Bagger kits for convenient collection and disposal of grass clippings.
- Dual-wheel conversions for enhanced traction and stability.
- Sulky attachments for comfortable and efficient riding operation.
- Quick-hitch compatibility for easy attachment and removal of accessories.
- Wide range of models and sizes to fit various Snapper lawn mowers.
Related manuals
Frequently Answers and Questions
What are the different types of accessories available for the Snapper COMMERCIAL WALK-BEHIND?
The Snapper COMMERCIAL WALK-BEHIND offers a wide range of accessories, including mulch kits, bagger kits, dual-wheel conversions, sulkies, and quick-hitch attachments.
How do I install the accessories on my Snapper lawn mower?
The Snapper COMMERCIAL WALK-BEHIND accessories are designed for easy installation. Refer to the specific kit instructions for detailed guidance.
Are the accessories compatible with all Snapper lawn mowers?
The Snapper COMMERCIAL WALK-BEHIND accessories are designed to fit a wide range of Snapper lawn mowers. Check the compatibility information for your specific mower model.
What are the benefits of using a mulch kit?
Mulch kits allow you to convert grass clippings into nutrient-rich mulch, reducing waste and fertilizing your lawn.
How do I empty the grass clippings from the bagger kit?
The bagger kits come with easy-to-remove bags that can be emptied by simply detaching them from the mower.
advertisement