STMicroelectronics TDA7391LV Datasheet

TDA7391LV
40 W bridge car radio amplifier with low voltage operation
Datasheet - production data
 Protections:
– Short circuit (to GND, to VS, across the
load)
– Very inductive loads
– Chip over temperature
– Load dump
– Open GND
– ESD
0XOWLZDWWYHUWLFDO
3RZHU62
VOXJGRZQ
3RZHU62
VOXJXS *$3*36
Description
Features
The TDA7391LV is a bridge class AB audio power
amplifier for car radio applications.
 High power capability:
– 40 W/ 4 Ω max
– 45 W/ 3.2 Ω max
– 32 W/ 3.2 Ω @ VS = 14.4 V, f = 1 kHz,
THD = 10 %
– 26 W/ 4 Ω @ VS = 14.4 V, f = 1 kHz,
THD = 10%
The high power capability together with the
possibility to operate either in differential input
mode or single ended input mode makes it
suitable for high end car radio equipment. The
exclusive fully complementary output stage and
the internal fixed gain configuration drop the
external component count.
 Differential inputs (either single ended or
differential input signal is accepted)
The on board clipping detector allows easy
implementation of gain compression systems.
 Minimum external component count
It is moreover compliant to the most recent OEM
specifications for low voltage operation ('startstop' battery profile during engine stop), and e-call
functions.
 Standby function (CMOS compatible)
 Capable to operate to 6 V - ‘start-stop’ and
‘e-call’ compatibility
Table 1. Device summary
Order code
Package
Packing
TDA7391LV
Multiwatt 11
Tube
TDA7391LVPD
TDA7391LVPDTR
TDA7391LVPDU
TDA7391LVPDUTR
December 2014
This is information on a product in full production.
PowerSO-20 (slug-down)
PowerSO-20 (slug-up)
DocID023014 Rev 3
Tube
Tape and reel
Tube
Tape and reel
1/23
www.st.com
Contents
TDA7391LV
Contents
1
Block diagram, test and application circuit . . . . . . . . . . . . . . . . . . . . . . 5
1.1
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2
Test and application circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2
Pins description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4
5
2/23
3.1
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2
Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.4
Low voltage operation (‘start stop’) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.5
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.1
Multiwatt 11 (vertical) package mechanical data . . . . . . . . . . . . . . . . . . . 16
4.2
PowerSO-20 (slug-down) package mechanical data . . . . . . . . . . . . . . . . 18
4.3
PowerSO-20 (slug-up) package mechanical data . . . . . . . . . . . . . . . . . . 20
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DocID023014 Rev 3
TDA7391LV
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Pins function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Multiwatt 11 (vertical) package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PowerSO-20 (slug-down) package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PowerSO-20 (slug-up) package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Document revision history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DocID023014 Rev 3
3/23
3
List of figures
TDA7391LV
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
4/23
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Test and application circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Multiwatt 11 pins connection (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
PowerSO-20 pins connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Worts case battery cranking curve sample 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Worst case battery cranking curve sample 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Quiescent current vs. supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output power vs. supply voltage (RL = 3.2 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output power vs. supply voltage (RL = 4 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output power vs. supply voltage (RL = 8 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Distortion vs. output power (RL = 3.2 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Distortion vs. frequency (RL= 3.2 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Distortion vs. output power (RL = 4 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Distortion vs. frequency (RL = 4 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Distortion vs. output power (RL = 8 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Distortion vs. frequency (RL = 8 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Distortion vs. output power (RL = 4 Ω, Vs = 6 V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Distortion vs. frequency (RL = 4 Ω, Vs = 6 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Distortion vs. output power (RL = 8 Ω, Vs = 6 V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Distortion vs. frequency (RL = 8 Ω, Vs = 6 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Supply voltage rejection vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Common mode rejection vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Total power dissipation and efficiency vs. output power (RL = 4 Ω) . . . . . . . . . . . . . . . . . . 14
Power dissipation vs. average output power (audio program simulation, RL = 4 Ω). . . . . . 14
Power dissipation vs. average output power (audio program simulation, RL = 4 Ω &
8 Ω, Vs = 6 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Power dissipation vs. output power (RL = 4 Ω & 8 Ω, sine, Vs = 6 V) . . . . . . . . . . . . . . . . . 15
Multiwatt 11 (vertical) package mechanical drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PowerSO-20 (slug-down) package mechanical drawing . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PowerSO-20 (slug-up) package mechanical drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
DocID023014 Rev 3
DocID023014 Rev 3
,1
,1
087(
,&0
9&&
6<1&
%,$6&,5&8,7
JP
*1'
9&&
&20021
02'(
7+'
'(7(&7
32:(5$03
/76
32:(5$03
67$1'%<
5()(5(1&(6
96
9 I7M
/76
',6$%/(
6+257&,5&8,7
'8037+(50$/
3527(&7,21
*$3*36
287
&'
287
1
Block diagram, test and application circuit
1.1
Block diagram
087(7+5(6+2/'
67$1'%<7+5(6+2/'
9&&
TDA7391LV
Block diagram, test and application circuit
Figure 1. Block diagram
5/23
22
Block diagram, test and application circuit
1.2
TDA7391LV
Test and application circuit
Figure 2. Test and application circuit
63
#—&
#N&
#—&
).
/54
#—&
).
/54
4$!,6
63
37
34"9
#$
-54%
#
—&
39.#
2
Kȍ
6REF
2
Kȍ
4/—#
'.$
*$3*36
6/23
DocID023014 Rev 3
TDA7391LV
2
Pins description
Pins description
Figure 3. Multiwatt 11 pins connection (top view)
-54%
39.#
63
34!.$"9
/54
'.$
/54
#$
63
).
).
4!"#/..%#4%$4/0).
*$3*36
Figure 4. PowerSO-20 pins connection
0'.$
0'.$
/54
/54
.#
34"9
6##
.#
0'.$
0'.$
/54
/54
.#
.#
.#
#$
#$
34"9
6##
6##
6##
).
).
.#
.#
).
).
.#
39.#
.#
.#
39.#
-54%
3'.$
3'.$
-54%
0'.$
0'.$
0'.$
0'.$
3LUGDOWN
3LUGUP
'!0'03
Table 2. Pins function
Multiwatt 11 PowerSO-20
Pin #
Pin #
1, 2
14, 15
3, 9
5, 16
4
17
Name
Description
INPUTS
The input stage is a high impedance type also capable
of operation in single ended mode with one input
capacitively coupled to the signal GND. The impedance
seen by the inverting and non inverting input pins must
be matched.
+V
S
CD
Supply voltage.
The TDA7391LV is equipped with a diagnostic circuitry
able to detect the clipping in the Output Signal
(distortion = 10%).
The CD pin (open collector) gives out low level signal
during clipping.
DocID023014 Rev 3
7/23
22
Pins description
TDA7391LV
Table 2. Pins function (continued)
Multiwatt 11 PowerSO-20
Pin #
5, 7
6
8
10
11
8/23
Pin #
2, 19
Name
Description
The output stage is a bridge type able to drive loads as
low as 3.2 Ω. It consists of two class AB fully
complementary PNP/NPN stages fully protected.
OUTPUTS
A rail to rail output voltage swing is achieved without
need of bootstrap capacitors.
No external compensation is necessary.
1, 10, 11, 20
GND
Power ground.
12
S-GND
Signal ground.
4
8
9
STANDBY
The device features a standby function which shuts
down all the internal bias supplies when the standby pin
is low. In standby mode the amplifier sinks a small
current (in the range of few μA). When the standby pin is
high the IC becomes fully operational.
SYNC
A resistor (R2) between pin 8 and GND set the charging
current of capacitor C3 (pin 9). The suggested values of
C3 and R2 define the correct timing in order to switch
on/off the amplifier without any pop noise.
MUTE
The pin is connected to a capacitor (C3) tied to GND to
set the mute/standby time.
An automatic mute during turn on/off is provided to
prevent noisy transients.
DocID023014 Rev 3
TDA7391LV
Electrical specifications
3
Electrical specifications
3.1
Absolute maximum ratings
Table 3. Absolute maximum ratings
Symbol
Value
Unit
VS
DC supply voltage
28
V
VOP
Operating supply voltage
18
V
Peak supply voltage (t = 50 ms)
50
V
Output peak current repetitive (f > 10 Hz)
4.5
A
Output peak current non repetitive
6
A
Ptot
Power dissipation (Tcase = 85 °C)
43
W
Tstg, Tj
Storage and junction temperature
-40 to 150
C
VPEAK
IO
3.2
Parameter
Thermal data
Table 4. Thermal data
Symbol
Rth j-case
3.3
Parameter
Thermal resistance junction-to-case
Multiwatt PowerSO
Max.
1.8
2
Unit
°C/W
Electrical characteristics
VS = 14.4 V; RL = 4 Ω, f = 1 kHz, Tamb = 25 °C, unless otherwise specified.
Table 5. Electrical characteristics
Symbol
Parameter
Test condition
Min.
Typ.
Max.
Unit
VS
Supply voltage range
-
6
-
18
V
Iq
Total quiescent current
-
-
60
150
mA
VOS
Output offset voltage
-
-
-
120
mV
ISB
Standby current
VST-BY = 1.5 V
-
-
50
μA
ISBin
Standby input bias current
VST-BY = 5 V
-
-
10
μA
VSBon
Standby on threshold voltage
-
-
-
1.5
V
VSBoff
Standby off threshold voltage
-
3.5
-
-
V
Standby attenuation
-
-
90
-
dB
IM in
Mute input bias current
(VMUTE = 5 V)
-
-
10
μA
AM
Mute attenuation
-
-
90
-
dB
ATTST-BY
DocID023014 Rev 3
9/23
22
Electrical specifications
TDA7391LV
Table 5. Electrical characteristics (continued)
Symbol
PO
PO MAX
THD
Parameter
Output power
Max. output power (1)
Total harmonic distortion
Test condition
Min.
Typ.
Max.
Unit
THD = 10 %
20
26
-
W
THD = 1 %
-
21
-
W
THD = 10 %; RL = 3.2 Ω
-
32
-
W
VS = 6 V; THD = 10 %
-
4.2
-
W
VS = 14.4 V; RL = 3.2 Ω
-
45
-
W
VS = 6 V; THD = 10 %
-
6
-
W
-
-
0.06
-
%
PO = 0.1 to 15 W
-
0.03
-
%
VS = 6 V; PO = 1 W
0.05
%
VS = 6 V; PO = 3.5 W
1.5
%
GV
Voltage gain
-
29.5
30
30.5
dB
fH
High frequency roll-off
PO = 1 W; -3 dB
75
-
-
kHz
Differential
36
60
-
kΩ
Single ended
30
55
-
kΩ
RIN
Input Impedance
EIN
Input noise voltage
Rg = 0 Ω; f = 22 Hz to 22 kHz
-
4
-
mV
Input common mode rejection
f = 1 kHz; VIN = 1 Vrms
-
65
-
dB
SVR
Supply voltage rejection
Rg = 0 Ω; Vr = 1 Vrms
-
60
-
dB
CDL
Clipping detection level
-
5
10
15
%
Tsd
Absolute thermal shutdown
junction temperature
-
-
160
-
C
CMRR
1. Saturated square wave output.
10/23
DocID023014 Rev 3
TDA7391LV
3.4
Electrical specifications
Low voltage operation (‘start stop’)
The most recent OEM specification are requiring automatic stop of car engine at traffic light,
in order to reduce emissions of polluting substances. The TDA7391LV allows a continuous
operation when battery falls down to 6/7 V during such conditions. The maximum system
power will be reduced accordingly.
Worst case battery cranking curves are shown below, indicating the shape and durations of
allowed battery transitions.
Figure 5. Worts case battery cranking curve sample 1
9EDWW9
9
9
9
9
W
W
W
W W
W
W
WV
*$3*36
V1 = 12 V; V2 = 6 V; V3 = 7 V; V4 = 8 V
t1 = 2 ms; t2 = 50 ms; t3 = 5 ms; t4 = 300 ms; t5 =10 ms; t6 = 1 s; t7 = 2 ms
Figure 6. Worst case battery cranking curve sample 2
9EDWW 9
9
9
9
W
W
W
W
W
WV
*$3*36
V1 = 12 V; V2 = 6 V; V3 = 7 V
t1 = 2 ms; t2 = 5 ms; t3 = 15 ms; t5 = 1 s; t6 = 50 ms
DocID023014 Rev 3
11/23
22
Electrical specifications
3.5
TDA7391LV
Electrical characteristics curves
Figure 7. Quiescent current vs. supply voltage
,TP$
Figure 8. Output power vs. supply voltage
(RL = 3.2 Ω)
3R:
9LQ 12/2$'
3RPD[
5/ ȍ
I N+]
7+' 7+' Figure 9. Output power vs. supply voltage
(RL = 4 Ω)
3R:
9V9
*$3*36
9V9
*$3*36
Figure 10. Output power vs. supply voltage
(RL = 8 Ω)
3R:
5/ Ÿ
I N+]
3RPD[
7+' Ÿ
5/ ȍ
I N+]
3RPD[
7+' 7+' 7+' 9V9
*$3*36
Figure 11. Distortion vs. output power
(RL = 3.2 Ω)
7+'
*$3*36
Figure 12. Distortion vs. frequency (RL= 3.2 Ω)
9V 9
5/ ȍ
9V9
7+'
9V 9
5/ ȍ
3R :
I N+]
I N+]
12/23
3R:
*$3*36
DocID023014 Rev 3
I+]
*$3*36
TDA7391LV
Electrical specifications
Figure 13. Distortion vs. output power
(RL = 4 Ω)
7+'
Figure 14. Distortion vs. frequency (RL = 4 Ω)
7+'
9V 9
5/ ȍ
3R :
9V 9
5/ ȍ
I N+]
I N+]
3R:
Figure 15. Distortion vs. output power
(RL = 8 Ω)
*$3*36
7+'
I+]
*$3*36
Figure 16. Distortion vs. frequency (RL = 8 Ω)
7+'
9V 9
5/ ȍ
3R :
9V 9
5/ ȍ
I N+]
I N+]
3R:
Figure 17. Distortion vs. output power
(RL = 4 Ω, Vs = 6 V)
7+'
*$3*36
7+'
I+]
Figure 18. Distortion vs. frequency
(RL = 4 Ω, Vs = 6 V)
9V 9
5/ Ÿ
*$3*36
9V 9
5/ Ÿ
3R :
I N+]
I N+]
3R: *$3*36
DocID023014 Rev 3
I+]
*$3*36
13/23
22
Electrical specifications
TDA7391LV
Figure 19. Distortion vs. output power
(RL = 8 Ω, Vs = 6 V)
Figure 20. Distortion vs. frequency
(RL = 8 Ω, Vs = 6 V)
7+'
7+'
9V 9
5/ Ÿ
3R :
9V 9
5/ Ÿ
I N+]
I N+]
3R:
*$3*36
Figure 21. Supply voltage rejection vs.
frequency
9
9UPV
ȍ
I +]
3WRW
9V 9
5 / ȍ
I N+]
14/23
*$3*36
9V 9
5/ ȍ
*$866,$112,6(
3GLVV:
&/,3
67$57
3GLVV:
Ș
I +]
Figure 24. Power dissipation vs. average output
power (audio program simulation, RL = 4 Ω)
Ș
3WRW:
*$3*36
Figure 23. Total power dissipation and
efficiency vs. output power (RL = 4 Ω)
9V 9
9FP 9UPV
5 / ȍ
5J *$3*36
&055G%
Figure 22. Common mode rejection vs.
frequency
695G%
9V 9U 5 /
5J
I+]
3R:
*$3*36
DocID023014 Rev 3
$YJ3R:
*$3*36
TDA7391LV
Electrical specifications
Figure 25. Power dissipation vs. average output
power (audio program simulation, RL = 4 Ω &
8 Ω, Vs = 6 V)
3GLVV:
3WRW:
9V 9
5/ Ÿ ȍ
*$866,$112,6(
Figure 26. Power dissipation vs. output power
(RL = 4 Ω & 8 Ω, sine, Vs = 6 V)
&/,3
67$57
Ÿ
9V 9
5/ Ÿ ȍ
I N+]
Ÿ
&/,3
67$57
Ÿ
Ÿ
$YJ3R:
*$3*36
DocID023014 Rev 3
3R:
*$3*36
15/23
22
Package information
4
TDA7391LV
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
4.1
Multiwatt 11 (vertical) package mechanical data
Figure 27. Multiwatt 11 (vertical) package mechanical drawing
+
$
/
6
'LDP
/
'
/
/
/
/
6
&
%
0
)
*
(
*
0
+
B/BSF9
*$3*36
Table 6. Multiwatt 11 (vertical) package mechanical data
Millimeters
Inches
Symbol
Min.
Max.
Min.
Typ.
Max.
A
5
0.1969
B
2.65
0.1043
C
1.6
0.063
D
16/23
Typ.
1
DocID023014 Rev 3
0.0394
TDA7391LV
Package information
Table 6. Multiwatt 11 (vertical) package mechanical data (continued)
Millimeters
Inches
Symbol
Min.
Typ.
Max.
Min.
Typ.
Max.
E
0.49
0.55
0.0193
0.0217
F
0.88
0.95
0.0346
0.0374
G
1.45
1.7
1.95
0.0571
0.0669
0.0768
G1
16.75
17
17.25
0.6594
0.6693
0.6791
H1
19.6
0.7717
H2
20.2
0.7953
L
21.9
22.2
22.5
0.8622
0.874
0.8858
L1
21.7
22.1
22.5
0.8543
0.8701
0.8858
L2
17.4
18.1
0.685
L3
17.25
17.5
17.75
0.6791
0.689
0.6988
L4
10.3
10.7
10.9
0.4055
0.4213
0.4291
L7
2.65
2.9
0.1043
M
4.25
4.55
4.85
0.1673
0.1791
0.1909
M1
4.73
5.08
5.43
0.1862
0.2
0.2138
S
1.9
2.6
0.0748
0.1024
S1
1.9
2.6
0.0748
0.1024
Diam.1
3.65
3.85
0.1437
0.1516
DocID023014 Rev 3
0.7126
0.1142
17/23
22
Package information
4.2
TDA7391LV
PowerSO-20 (slug-down) package mechanical data
Figure 28. PowerSO-20 (slug-down) package mechanical drawing
%277209,(:
M JJJ P &% $
'
M JJJ P &% $
(
*$3*36
ș
I HHH &
H
(
$ $
G FFF &
6($7,1*3/$1(
$
E
$
M GGG P & $%
&
'
$
'(7$,/$
ș
'
1
'(7$,/$
ș
$
' [
5
+
%
%
6
5
*$8*(3/$1(
/
/
ș
%
/
(
(
E
:,7+3/$7,1*
LQGH[DUHD
'[(
F
E
[
SLQLQGLFDWRU
F
%$6(0(7$/
G DDD &
[17,36
K[ƒ
G EEE &
H
$
VHH),*
7239,(:
B0B&'
*$3*36
Table 7. PowerSO-20 (slug-down) package mechanical data
Millimeters
Inches
Symbol
Min.
Typ.
Min.
Typ.
Max.
Ө
0°
8°
0°
8°
Ө1
5°
10°
5°
10°
Ө2
0°
0°
A
3.6
A1
0.1
A2
3
A3
18/23
Max.
0.1417
0.0039
3.15
3.3
0.1
DocID023014 Rev 3
0.1181
0.124
0.1299
0.0039
TDA7391LV
Package information
Table 7. PowerSO-20 (slug-down) package mechanical data (continued)
Millimeters
Inches
Symbol
Min.
b
0.4
b1
0.4
c
0.23
c1
0.23
D
(1)
D1
Typ.
0.45
0.25
Max.
Min.
0.53
0.0157
0.5
0.0157
0.32
0.0091
0.29
0.0091
15.90 BSC
9
0.0209
0.0177
0.0098
0.3543
0.0433
5
0.1969
e
1.27 BSC
0.050 BSC
E
14.20 BSC
0.5591 BSC
11.00 BSC
04331 BSC
E2
5.6
0.0114
0.5118
D3
E1
0.0197
0.0126
1.1
(1)
Max.
0.626 BSC
13
D2
Typ.
6.2
0.2205
0.2441
E3
2.9
0.1142
h
1.1
0.0433
L
0.8
1.1
0.0315
0.0433
L1
1.60 REF
0.063 REF
L2
0.35 BSC
0.0138 BSC
N
20
0.7874
R
0.2
0.0079
R1
0.2
0.0079
S
0.25
0.0098
aaa
0.1
0.0039
bbb
0.3
0.0118
ccc
0.1
0.0039
ddd
0.25
0.0098
eee
0.1
0.0039
ggg
0.25
0.0098
1. Dimensions ‘D’ and ‘E1’ do not include mold flash or protrusions. Allowable mold flash or protrusions is
“0.25 mm” per side D and “0.15 mm” per side E1. D and E1 are Maximum plastic body size dimensions
including mold mismatch.
DocID023014 Rev 3
19/23
22
Package information
4.3
TDA7391LV
PowerSO-20 (slug-up) package mechanical data
Figure 29. PowerSO-20 (slug-up) package mechanical drawing
'!0'03
(
+
5
1
1
$
$
$
$
F
9
H
E
9
'[
H
0
(
*1'
*1'
K[ƒ
(
'(7$,/$
'(7$,/$
(
(
*$*(
3/$1(
*1'
*1'
67$1'2))
67$1'2))
V
/
D &
67$1'2))
6($7,1*3/$1(
* &
&23/$1$5,7<
'
'
*$3*36
B*BSF
Table 8. PowerSO-20 (slug-up) package mechanical data
Millimeters
Inches
Symbol
Min.
Max.
Min.
3.5
0.128
3.3
0.1181
Typ.
Max.
A
3.25
A2
3
a1
0.03
-0.04
0.0012
-0.0016
A4
0.8
1
0.0315
0.0394
A5
0.15
0.25
0.0059
b
0.4
0.53
0.0157
0.0209
c
0.23
0.32
0.0091
0.0126
D
15.8
16
0.622
0.6299
D1 (1)
9.4
9.8
0.3701
0.3858
D2
3.15
0.2
1
E
13.9
e
1.12
e3
20/23
Typ.
1.27
0.1378
0.124
0.0079
0.1299
0.0098
0.0394
14.5
0.5472
1.42
0.0441
11.43
DocID023014 Rev 3
0.5709
0.05
0.45
0.0559
TDA7391LV
Package information
Table 8. PowerSO-20 (slug-up) package mechanical data (continued)
Millimeters
Inches
Symbol
Min.
E1 (1)
Typ.
10.9
E2
Max.
Min.
11.1
0.4291
Typ.
Max.
0.437
2.9
0.1142
E3
5.8
6.2
0.2283
0.2441
G
0
0.1
0
0.0039
h
1.1
0.0433
H
15.5
15.9
0.6102
0.626
L
0.8
1.1
0.0315
0.0433
N
10d.
R
10d.
0.6
0.0236
s
0d.
8d.
0d.
8d.
V
5d.
7d.
5d.
7d.
1. ‘D’ and ‘E1’ do not include mold flash or protrusions.
Mold flash or protrusions shall not exceed 0.15 mm (0.006 inches) per side.
DocID023014 Rev 3
21/23
22
Revision history
5
TDA7391LV
Revision history
Table 9. Document revision history
Date
Revision
29-Mar-2012
1
Initial release.
2
Updated:
Features on page 1;
Figure 1: Block diagram on page 5;
Table 2: Pins function.
Updated disclaimer.
3
Updated:
Features and Description on page 1;
Table 5: Electrical characteristics
Section 3.5: Electrical characteristics curves;
Section 4: Package information.
18-Sep-2013
01-Dec-2014
22/23
Changes
DocID023014 Rev 3
TDA7391LV
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2014 STMicroelectronics – All rights reserved
DocID023014 Rev 3
23/23
23
">