Toshiba 27AF44 CRT Television User Manual

Important
Safeguards
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
8/1/18, 12:25
1
3N11501A[E] COVER
Appendix
27AF44
Important
Safeguards
Dear Customer,
Child Safety
Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV.
Before operating the TV, please read this manual
completely, and keep it nearby for future reference.
It Makes A Difference
Where Your TV Stands
Safety Precautions
Congratulations on your purchase! As you enjoy
your new TV, keep these safety tips in mind:
WARNING
The Issue
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
If you are like most consumers, you have a TV in your home.
Many homes, in fact, have more than one TV.
The home theater entertainment experience is a growing
trend, and larger TVs are popular purchases; however, they
are not always supported on the proper TV stands.
Sometimes TVs are improperly secured or inappropriately
situated on dressers, bookcases, shelves, desks, audio
speakers, chests, or carts. As a result, TVs may fall over,
causing unnecessary injury.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Toshiba Cares!
The lightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock. DO NOT TRY TO SERVICE
THIS PRODUCT YOURSELF.
The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
The Consumer Electronics
Association formed the Home
Entertainment Support Safety
Committee, comprised of TV and
consumer electronics furniture
manufacturers, to advocate
children’s safety and educate
consumers and their families about
television safety.
The exclamation mark in the triangle tells you that
important operating and maintenance instructions
follow this symbol.
NOTE TO CATV INSTALLERS IN THE USA
This is a reminder to call the CATV system installer’s
attention to Article 820-40 of the NEC, which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical. For additional antenna grounding information,
see items 25 and 26 on page 4.
Tune Into Safety
One size does NOT fit all! Use appropriate
furniture large enough to support the weight of your
TV (and other electronic components).
Use appropriate angle braces, straps, and anchors to secure
your furniture to the wall (but never screw anything directly
into the TV).
Carefully read and understand the other enclosed
instructions for proper use of this product.
Do not allow children to climb on or play with furniture
and TVs.
Avoid placing any item on top of your TV (such as a VCR,
remote control, or toy) that a curious child may reach for.
Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
Share our safety message about this hidden hazard of the
home with your family and friends. Thank you!
NOTICE OF POSSIBLE TV STAND INSTABILITY
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH! Use this TV with
the TOSHIBA TV stand recommended in the
“Specifications” section only. Use with other stands may
result in instability, causing possible injury or death.
NOTICE OF POSSIBLE ADVERSE EFFECTS
ON TV PICTURE TUBE
If a fixed (non-moving) pattern remains on the TV
screen for long periods of time, the image can become
permanently engrained in the picture tube. This type of
damage is NOT COVERED BY YOUR WARRANTY.
See item 33 on page 4.
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
Tel. 703-907-7600 Fax 703-907-7690
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES ®
0303
22
3N11501A[E] P02-06
2
8/1/18, 12:25
1)
2)
3)
4)
Installation, Care, and Service
Installation
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Follow these recommendations and precautions and heed all
warnings when installing your TV:
5) Do not use this apparatus near
water.
17)
6) Clean only with a dry cloth.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
11) Only use attachments/accessories specified by the
manufacturer.
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during
lightning storms or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
QUALIFIED
SERVICE
operate normally, or has been dropped.
TECHNICIAN
23) Never overload wall outlets and
extension cords.
0303
33
3N11501A[E] P02-06
3
8/1/18, 12:25
Appendix
15) CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
Using the TV’s
Features
20) Never place items such as vases,
aquariums, or candles on top of the TV.
Setting up
your TV
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
Using the
Remote Control
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
Wide plug
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
Connecting
your TV
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
Welcome to
Toshiba
16) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
Important
Safeguards
Important Safety Instructions
Important
Safeguards
24) Always operate this equipment from
a 120 VAC, 60 Hz power source only.
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6 to 7 hours to
allow the condensation to evaporate.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
31) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
Antenna lead-in wire
Ground clamp
Electric service equipment
Ground clamps
26)
32) During normal use, the TV may make
occasional snapping or popping
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
33) Possible Adverse Effects on TV Picture Tube: If a fixed
(non-moving) pattern remains on the TV screen for long
periods of time, the image can become permanently
engrained in the picture tube and cause subtle but
permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your TV
on for long periods of time while it is displaying the
following formats or images:
Power service grounding
electrode system (NEC Art 250 Part H)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
• Fixed Images, such as PIP/POP windows, stock tickers,
video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Care
Service
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
34)
27) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
QUALIFIED
SERVICE
TECHNICIAN
35) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
29)
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
Improper disposal may result in a picture tube implosion
and possible personal injury.
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
0303
44
3N11501A[E] P02-06
4
8/1/18, 12:25
Exploring your new TV ................................................................................................................................ 6
Selecting a location for the TV .................................................................................................................... 6
Important
Safeguards
Important Safety Information .......................................................................................... 2-4
Welcome to Toshiba............................................................................................................ 6
Connecting your TV ............................................................................................................ 7
Using the remote control ................................................................................................... 11
Setting up your TV ............................................................................................................ 15
Changing the on-screen display language ................................................................................................ 15
Adding channels to the TV’s memory ........................................................................................................ 16
Programming channels automatically ................................................................................................ 16
Adding and erasing channels manually ............................................................................................. 16
Changing channels .................................................................................................................................... 16
Connecting
your TV
Preparing the remote control for use ......................................................................................................... 11
Installing the remote control batteries ....................................................................................................... 11
Using the remote control with a VCR, DVD player or cable TV converter ................................................ 11
Programming the remote control for use with a VCR, DVD player, or cable TV converter ...................... 12
VCR, DVD player, and cable TV converter codes ..................................................................................... 13
Learning about the remote control ............................................................................................................ 14
Welcome to
Toshiba
Connecting a VCR ....................................................................................................................................... 7
Connecting a cable converter box ............................................................................................................... 8
Connecting a DVD player/satellite receiver and a VCR .............................................................................. 9
Connecting a DVD player with ColorStream® (component video) and a VCR ............................................ 9
Connecting two VCRs ............................................................................................................................... 10
Connecting a camcorder ........................................................................................................................... 10
Connecting an audio amplifier ................................................................................................................... 10
Using the TV’s features .................................................................................................... 17
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Adjusting the channel settings ................................................................................................................... 17
Switching between two channels ....................................................................................................... 17
Programming your favorite channels ................................................................................................. 17
Using theV-Chip (parental control) feature (U.S. V-Chip system only) ..................................................... 18
Selecting a PIN code .......................................................................................................................... 18
Blocking programs by ratings ............................................................................................................. 19
Blocking unrated movies or programs ................................................................................................ 22
Using the LOCK menu ............................................................................................................................... 22
Locking channels ................................................................................................................................ 22
Locking video input ............................................................................................................................. 23
Setting the game timer .............................................................................................................................. 23
Labeling channels ...................................................................................................................................... 24
Setting the clock ........................................................................................................................................ 25
Setting the ON/OFF timer .......................................................................................................................... 25
Setting the on timer ............................................................................................................................ 25
Setting the off timer ............................................................................................................................ 26
Adjusting the picture quality ...................................................................................................................... 27
Watching video input ................................................................................................................................. 27
Selecting the ColorStream® mode ............................................................................................................. 27
Displaying on-screen information .............................................................................................................. 27
Setting the sleep timer ............................................................................................................................... 28
Using the closed caption feature ............................................................................................................... 28
Changing the picture size .......................................................................................................................... 28
Adjusting the sound ................................................................................................................................... 29
Muting the sound ................................................................................................................................ 29
Selecting stereo/SAP broadcasts ....................................................................................................... 29
Adjusting the sound quality ................................................................................................................ 30
Using the BBE sound feature ............................................................................................................. 30
Using the surround sound feature ...................................................................................................... 31
Using the StableSound® feature ......................................................................................................... 31
Auto power off ............................................................................................................................................ 31
Understanding the Power Return feature .................................................................................................. 31
Appendix ............................................................................................................................ 32
5
3N11501A[E] P02-06
5
8/1/18, 12:25
Appendix
Troubleshooting ......................................................................................................................................... 32
Specifications ............................................................................................................................................. 33
Limited United States Warranty ................................................................................................................. 34
Limited Canada Warranty .......................................................................................................................... 35
Welcome to
Toshiba
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting up
and operating your Toshiba TV as quickly as possible.
You may need to purchase other audio or video cables to connect your
equipment. See “Connecting your TV” on page 7 for more information.
Please read all the safety and operating instructions carefully before
you begin.
Exploring your new TV
You can operate your TV by using the buttons on the front panel or the
remote control. The front and back panels provide all the inputs you will
need to connect other equipment to your TV.
CHANNEL
POWER
VOLUME
POWER
VIDEO-3 IN
VIDEO
L/MONO R
AUDIO
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
PHONES
DVD
+10
POWER
Power indicator
Volume
Phones
CH +
Remote sensor
Channel
Audio(L/R)/Video In
VOL
–
VOL
+
MENU/
ENTER
TV front panel
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
DVD CLEAR TOP MENU DVD MENU
CODE
MTS
SLEEP
REW
PLAY
TV/VCR
STOP
PAUSE/STILL
REC
MUTE
FF
VCR CH
DVD SKIP
CT-847
TV back panel
Selecting a location for the TV
• Place the TV on the floor or on a sturdy platform in a location where
light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventilation.
Inadequate ventilation may cause overheating, which may damage
the TV.
6
3N11501A[E] P02-06
6
8/1/18, 12:25
Important
Safeguards
Connecting your TV
If you haven’t connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section. (Cables
are not supplied.)
Welcome to
Toshiba
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Standard A/V (audio/video) cables are usually color coded
according to use: yellow for video and red and white for audio. The
red audio cable is for the stereo right channel, and the white audio
cable is for the stereo left (or mono) channel. If you look at the rear
panel of the TV, you will see that the terminals are color coded in
the same manner as the cables.
• S-video cables provide better picture performance. S-video cables
can only be used with S-video compatible components.
• Component video cables come in sets of three and provide the best
picture performance. Component video cables can only be used
with component video compatible components.
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
Connecting
your TV
S-Video
Cable
ANTENNA
Coaxial Cable
AUDIO
Cables
Component video
Cables
Using the
Remote Control
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video programs,
play or record on the VCR while watching TV, and record from one
channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
IN
Note:
OUT
If using a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
For better picture quality, if your VCR has Svideo, you can use an S-video cable instead
of the standard video cable. Do not connect a
standard video cable and an S-video cable to
VIDEO1 simultaneously.
Y
VIDEO
ANT (75Ω)
VIDEO
PB
L/MONO
S-VIDEO
AUDIO
L/MONO
AUDIO
PR
R
R
VIDEO 1
VIDEO 2
Using the TV’s
Features
Cable Lead-in
from cable box
or antenna
Setting up
your TV
TV
Stereo VCR
IN
IN from ANT
OUT to TV
OUT
VIDEO
L
AUDIO
R
Appendix
CH 3
CH 4
7
3N11501A[E] P07-16
7
8/1/18, 12:25
Connecting a cable converter box
This television has an extended tuning range and can tune most cable
channels without using a cable company supplied converter box. Some
cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the
use of a descrambler device, which is generally provided by the cable
company.
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler box,
connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack
on the back of the television.
Connecting
your TV
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service that requires the use of a Converter/
Descrambler box, connect the incoming cable to the Converter/
Descrambler box and connect the output of the box to the Antenna
Jack on the back of the television. Follow the connections shown
below. Set the television to the output of the Converter/Descrambler
box (usually channel 3 or 4) and use the Converter/Descrambler box to
select channels.
For Subscribers to Unscrambled Basic Cable with
Scrambled Premium Channels
If you subscribe to a cable service in which basic cable channels are
unscrambled and premium channels require the use of a Converter/
Descrambler box, you may wish to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/B Switch box from the cable
installer or an electronics supply store. Follow the connections shown
below. With the switch in the “B” position, you can directly tune any
nonscrambled channels on your TV. With the switch in the “A” position,
tune your TV to the output of the Converter/Descrambler box (usually
channel 3 or 4) and use the box to tune scrambled channels.
Note:
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
labeling channels, blocking channels, and
programming your favorite channels.
Incoming CATV
IN
OUT
Y
Converter/Descrambler
ANT (75Ω)
VIDEO
L/MONO
S-VIDEO
Converter/Descrambler
AUDIO
VIDEO
PB
PR
A / B Switch
A B
VIDEO 1
8
3N11501A[E] P07-16
8
8/1/18, 12:25
AUDIO
R
R
Splitter
L/MONO
VIDEO 2
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
To satellite
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one S-video cable
• one pair of standard audio cables
Important
Safeguards
Connecting a DVD player/satellite receiver
and a VCR
DVD player/ Satellite Receiver
You can use a standard video cable instead of
the S-video cable, but the picture quality will
decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections only
and remove the standard video cable.
Satellite IN
R
AUDIO
S-VIDEO
TV
IN
Welcome to
Toshiba
Note:
OUT
L
OUT
Y
VIDEO
VIDEO
ANT (75Ω)
PB
L/MONO
AUDIO
L/MONO
AUDIO
PR
R
R
VIDEO 1
To antenna
Connecting
your TV
S-VIDEO
VIDEO 2
Stereo VCR
IN
IN from ANT
OUT to TV
OUT
L
VIDEO
AUDIO
R
Connecting a DVD player with ColorStream®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs. You can record from one source while watching a
program from another source. Your TV is capable of using ColorStream
(component video). Connecting your TV to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream®, can
greatly enhance picture quality and performance.
OUT
L
COLORSTREAM TM
Y
Cb
Cr
R
VIDEO
AUDIO
S-VIDEO
OUT
TV
OUT
Y
ANT (75Ω)
VIDEO
PB
L/MONO
S-VIDEO
AUDIO
L/MONO
AUDIO
PR
To antenna
The unauthorized recording, use, distribution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
R
R
VIDEO 1
VIDEO 2
Stereo VCR
IN
IN from ANT
The ColorStream inputs on this TV are for use
with devices that output 480i interlaced
signals ONLY. This TV will not accept or
display 480p or 720p progressive scan
signals or 1080i interlaced high-definition
signals. If you connect a high-definition settop receiver, 480p progressive scan DVD
player, or other similar device to the TV’s
ColorStream inputs, YOU MUST SWITCH
THE DEVICE’S OUTPUT TO 480i INTERLACED MODE FIRST. Failure to do this will
cause a poor picture or no picture to display.
OUT to TV
VIDEO
L
AUDIO
Appendix
OUT
CH 3
CH 4
R
9
3N11501A[E] P07-16
9
Using the TV’s
Features
IN
VIDEO
Note:
Setting up
your TV
DVD player with ColorStream®
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
Using the
Remote Control
CH 3
CH 4
8/1/18, 12:25
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR.
You will also be able to record from one TV channel while watching
another channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
Stereo VCR / Playback
To antenna
Note:
IN
IN from ANT
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
For better picture quality, if your VCR has Svideo, you can use an S-video cable instead
of the standard video cable. Do not connect a
standard video cable and an S-video cable to
VIDEO1 simultaneously.
OUT to TV
OUT
CH 3
CH 4
L
VIDEO
AUDIO
R
TV
IN
OUT
Y
ANT (75Ω)
VIDEO
VIDEO
PB
L/MONO
S-VIDEO
AUDIO
L/MONO
AUDIO
PR
R
R
Connecting
your TV
VIDEO 1
VIDEO 2
Stereo VCR/ Recording
IN
IN from ANT
OUT to TV
OUT
CH 3
CH 4
L
VIDEO
AUDIO
R
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of standard A/V cables
Camcorder
Note:
For better picture quality, if your camcorder
has S-video, you can connect an S-video
(and standard audio cables) to VIDEO1 on
the back of the TV. Do not connect a standard
video cable and an S-video cable to VIDEO1
simultaneously.
AUDIO
VIDEO
L
R
OUT
R
VIDEO-3 IN
Front Panel of TV
VIDEO
L/MONO R
AUDIO
PHONES
Connecting an audio amplifier
This connection allows you to use an audio amplifier to enjoy a highquality sound. This also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier.
Audio Amplifier
The unauthorized recording, use, distribution or revision of television programs,
videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
AUDIO
L
R
IN
OUT
TV
To cable,
cable box
or antenna
You will need:
• one coaxial cable
• one pair of audio cables
IN
OUT
Y
ANT (75Ω)
VIDEO
L/MONO
S-VIDEO
AUDIO
VIDEO
PB
PR
AUDIO
R
R
VIDEO 1
L/MONO
VIDEO 2
10
3N11501A[E] P07-16
10
8/1/18, 12:25
Important
Safeguards
Using the remote control
Preparing the remote control for use
Installing the remote control batteries
Note:
The TV remote control may or may not
operate your VCR, DVD player, or cable TV
converter. Refer to the owner’s manuals
supplied with the equipment to see which
features are available. In addition, the original
controllers may have features not available on
this remote control. If you would like to
continue to use these features, you may want
to use the original remote control.
Welcome to
Toshiba
With the remote control, you can operate your TV, most VCR and DVD
player models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR or
DVD player, your remote control is already programmed and ready to
use. If you own different brands of VCRs, DVD players and/or
converters, you first have to program your remote control. (See
“Programming the remote control for use with a VCR, DVD player, or
cable TV converter” on page 12.)
To install the batteries:
1. Open the battery cover on the back of the remote control.
Cautions:
Connecting
your TV
2. Install two “AAA” size batteries. Match the + and – signs on the
batteries to the signs on the battery compartment.
Using the
Remote Control
• Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote control
for a long time, remove the batteries.
3. Close the battery cover on the remote control until the lock snaps.
Using the remote control with a VCR, DVD player, or cable TV converter
VCR
POWER
Play
Rewind
VCR
CABLE
DVD
1
2
3
4
5
6
100
7
8
9
0
+10
CH +
VOL
–
VOL
+
MENU/
ENTER
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
Fast Forward
TV
DVD CLEAR TOP MENU DVD MENU
CODE
MTS
SLEEP
REW
PLAY
TV/VCR
STOP
To control a DVD player:
Program the remote
control to recognize the
brand of your DVD
player (see
“Programming the
remote control for use
with a VCR, DVD player,
or cable TV converter”
on page 12). The
buttons shown at right
will then control the DVD
player. Press the DVD
button first.
MUTE
FF
PAUSE/STILL
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
Power
DVD
DVD
+10
Number
buttons
CH +
DVD MENU
▲/▼/ /
Enter
TOP Menu
Volume
▲/▼ (TV)
DVD Clear
Display
Fast Forward
Play
Rewind
DVD Menu
VOL
–
VOL
+
MENU/
ENTER
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
DVD CLEAR TOP MENU DVD MENU
CODE
MTS
SLEEP
REW
PLAY
TV/VCR
STOP
MUTE
Using the TV’s
Features
Program the remote
Power
control to recognize
the brand of your VCR
(see “Programming the Channel
remote control for use
Numbers
with a VCR, DVD
player, or cable TV
converter” on page
12). The buttons
Channel +/–
shown at right will then
control the VCR. Press CH Enter
the VCR button first.
Setting up
your TV
To control a VCR:
FF
PAUSE/STILL
TV/VCR
REC
Record
DVD SKIP
DVD Skip
Pause/Still
Pause/Still
11
3N11501A[E] P07-16
11
Stop
/
8/1/18, 12:25
VCR CH
DVD SKIP
Appendix
Stop
VCR CH ▲/▼
REC
VCR CH
To control a cable TV
converter:
CABLE
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
Power
Program the remote
control to recognize the
brand of your converter
Channel
(see “Programming the
Numbers
remote control for use
with a VCR, DVD player,
or cable TV converter”
Channel +/–
below). The buttons
shown at right will control
the cable TV converter.
CH Enter
Press the CABLE button
first.
DVD
+10
CH +
VOL
–
VOL
+
MENU/
ENTER
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
DVD CLEAR TOP MENU DVD MENU
CODE
MTS
SLEEP
REW
PLAY
TV/VCR
STOP
REC
MUTE
FF
PAUSE/STILL
VCR CH
Using the
Remote Control
DVD SKIP
Programming the remote control for use with
a VCR, DVD player, or cable TV converter
1
2
CABLE
DVD
3
+10
4
5
7
8
6
100
9
0
CH +
VOL
–
VOL
+
MENU/
ENTER
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
CODE
REW
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
PLAY
MUTE
FF
Code
Notes:
VCR code ________________________
• When shipped from the factory, the remote
control is set to operate your TV.
• If you do not enter the code within 10
seconds from step 1 or if you enter a code
not listed below, this operation is canceled.
• Each time you replace the batteries, you
must reprogram the remote control.
• Some newer VCRs are capable of working
on either of two remote codes. These VCRs
have a switch labeled “VCR1/VCR2.”
If your VCR has this kind of switch and does
not respond to any of the codes for your
VCR, set the switch to the other position
(VCR1 or VCR2) and reprogram the remote
control.
DVD player code ___________________
Cable TV converter code _____________
12
12
VCR
CABLE
1. While holding down the CODE button, press the button for the
device you want to control (VCR, DVD, or CABLE).
2. Enter the 2-digit code listed on page 13 using the Number buttons
(0–9) within 10 seconds.
3. Point the remote control at the VCR, DVD player, or converter and
press POWER to test the code.
If the VCR, DVD player, or converter turns on, you have entered
the right code.
If the VCR, DVD player, or converter does not respond to the
remote control, you may have entered the wrong code. Repeat
steps 1~2 with another code.
3N11501A[E] P07-16
TV
DVD
This remote control is pre-programmed to operate Toshiba VCRs and
DVD players. To control VCRs, DVD players, or cable converters other
than Toshiba models, you must follow the steps below to program your
remote control.
For future reference, write down the codes you used:
VCR
POWER
8/1/18, 12:25
,+(,)
,+
+/
+,
,'
-*( +'
*&
,/( *)( *.( *'
,,
,+
,**
,,( -,
,.( +*
-+
-*( +'
1! 2
13
%
!%
4
4
5#
5 5
4
63
7
7 .*0
-&
+)( *-( -)( )/
+-&
-0( &)( .+
+.( +'( /)
/'( )*
//
&'( )*
/,
/0
&/( &&( .*
,+( &-( ./
+*( *'( -,( &+
!
"#
$
$
$%
$
&'( )*
)+
,&( -+( -'
).
,&( ,)
,*( ,-( /&( )&( ))
,/( ,.( ,'( ,0( +,( +'( ),( )-&
+/( *+
-/
-&( -0( )'( )0( .,
++( -*( /*
+-( *,
-/.( &,( &*( &/( &&
+&( /-
13
3N11501A[E] P07-16
13
8/1/18, 12:25
Appendix
1!
?
%
%
!
3
4
4
4?
6
@
7
<
Using the TV’s
Features
**,
,,( +.
,+
++
,0
+&( *0
+0
,&
,+
*+
*/
,,
,-( +)
,*
+-
Setting up
your TV
-0
,*( +'
--( &,
+/( &+( &0
+&
,.( +/
,.( +/( *.
+,( +&
/)
+)( ),
+/( &0
+&( +)( *,( *.( /,( /*( ),
,)( ,'( +*( +/( -+
*,( -,
-0
,)( +*( /.
,/( ,&( --( /,)( ,0( ++( +*( +&
,'( )+
-0
,'( +/( +)( +0( -+( /0
+.( -*( -.
,.( +/( *.
-+
,0
,*
,*( -+
-/
,&( +&
-0
,/( +'
,*( +'
,+( */( *&( *0( -.
Using the
Remote Control
%
2
<
!
#
?
"#3
"
$
$%
$
1
4
!
"
$
$
$
$%
$
$
$ :
1!
1
3
%
*,,,
3
3
3%
4#
4
4
4##
4?
;1+,,,
1
@
7
Connecting
your TV
,'( )+
-+
-+
*-( -'( /+
,*( +'
,)( /.
*+( *)( --( &,( &&
+/
,0
+*
+/( &0
//( /)( /'( &/
-)( /)
,*( +'
,-( *+ *-( *)( --( -&( /-( &,
++( +*( +-( /.
-+
+/( +)( *,
,0
&)( )*( )+&( &.
+/( *.
+/( +&( +'( *.
,*( *&( &'
,*
-0
,0( -+
,.( +/( -+
,.( +'
,0
,)( +*( +/( -+( -,/( **( &*( )/
,'( +/( +)( +0( -+( /0
Welcome to
Toshiba
#
23
8 #
!
!9
!
! 2
23
2;
<
<
1%3
=!= $3
!
>#
>;
9
?
3 6
Important
Safeguards
VCR, DVD player, and cable TV converter codes
Learning about the remote control
POWER turns the TV on and off
Sleep programs the TV to turn off at a set time (page 28)
TV/Video selects the video input source (page 27)
Channel + / – cycles through programmed channels (page 16)
TV/VCR/DVD/CABLE
TV/VCR/DVD/Cable select TV, VCR, DVD, or CABLE mode (page 11)
POWER
Channel Numbers allow direct access to channels (page 16)
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
Volume + / – adjusts the volume level
+10
Channel
Numbers
Channel Return returns to the last viewed channel (page 17)
Menu/Enter allows access to programming menus, and sets programmed menu information (page 15)
Favorite Channels ▲▼ cycle through favorite channels (page 17)
CH +
CAP/TEXT turns closed captions or text on and off (page 28)
1/2 selects closed caption/text channel 1 or 2 (page 28)
Menu/Enter
Channel +/–
VOL
–
Reset returns settings to preset factory formats (pages 27 and 30)
VOL
+
MENU/
ENTER
Recall
Exit
Volume ▼▲ (DVD)
Mute turns off the sound (page 29)
Using the
Remote Control
TV
POWER
MTS switches among STEREO, SAP, and MONO sound (page 29)
Closed
Captioning
Reset
Display (DVD)
DVD Clear
Code
MTS
Rew
Play
Recall displays status information on-screen (page 27)
CODE is used to program the remote control (page 12)
Exit exits programming menus (page 15)
16:9 toggles the aspect ratio between 4:3 (letterbox) and 16:9 (wide
screen) modes (page 28)
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
DVD CLEAR TOP MENU DVD MENU
CODE
MTS
SLEEP
REW
PLAY
TV/VCR
STOP
MUTE
FF
PAUSE/STILL
REC
DVD SKIP
Rec starts recording a videotape
Play plays a videotape/DVD
FF fast forwards a videotape/DVD
Rew rewinds a videotape/DVD
Pause/Still pauses a videotape/DVD
TV/VCR toggles between TV and VCR modes when viewing while
recording
VCR Channel ▲▼ cycles through programmed channels of VCR
DVD Skip
skips chapter of DVD
Display displays status information on-screen in the DVD
Volume ▲▼ adjusts the volume level of DVD playback
DVD Clear clears input data in the setting mode of DVD
TOP Menu allows access to TOP menu of DVD
DVD Menu allows access to DVD menu of DVD
14
3N11501A[E] P07-16
14
8/1/18, 12:25
Mute
Sleep
FF
VCR CH
Rec
Stop stops a videotape/DVD
DVD Menu
TOP Menu
Pause/Still
TV/VCR
Stop
Volume +/–
TV/Video
Favorite
Channels ▲▼
Channel Return
16:9
VCR Channel
▲▼/DVD Skip
Important
Safeguards
Setting up your TV
After you have installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu
system. You can access the menu system with the buttons on the
remote control.
Changing the on-screen display language
Welcome to
Toshiba
• When you make a menu selection, your changes occur immediately. You do not have to press MENU or EXIT to see your
changes.
• After five seconds, the menu screen will automatically close if you
do not make a selection. Your changes will still be saved.
• When you are finished programming the menus, press EXIT.
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
You can choose from three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
or
CH +
until the OPTION menu appears.
VOL
–
VOL
+
MENU/
ENTER
Menu
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
MTS
or
FAV
1/2
16:9
SLEEP
MUTE
Exit
Setting up
your TV
3. Press
FAV
CH RTN
DVD CLEAR TOP MENU DVD MENU
2. Press ▲ or ▼ to highlight LANGUAGE.
TV/VIDEO
Using the
Remote Control
Connecting
your TV
To select a language:
1. Press MENU, then press
+10
to highlight your desired language.
Using the TV’s
Features
Appendix
15
3N11501A[E] P07-16
15
8/1/18, 12:25
Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press ▲ or ▼ until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
POWER
4. Press ▼ to select CH PROGRAM.
5. Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH + or – to view the programmed channels.
VCR
1
2
3
4
5
6
100
7
8
9
0
+10
Channel +/–
VOL
–
Setting up
your TV
VOL
+
MENU/
ENTER
Menu
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press or
CH
to display the SETUP menu.
PICTURE AUDIO SETUP OPTION
3. Press ▲ or ▼ to highlight ADD/
TV / CABLE
CABLE
ERASE.
CH PROGRAM
START
4. Press or to select ADD or
ADD / ERASE
ADD ERASE
ERASE, whichever function you
want to perform.
SELECT
ADJUST
5. Repeat steps 1~4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel ▼ or ▲ on the TV or CH + or – on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
16
16
Channel
Numbers
CH +
Adding and erasing channels manually
3N11501A[E] P07-16
CABLE
DVD
TV
8/1/18, 12:25
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
Exit
POWER
Adjusting the channel settings
TV
VCR
1
2
3
4
5
6
100
7
8
9
0
Important
Safeguards
Using the TV’s features
CABLE
DVD
Switching between two channels
+10
You can switch between two channels without entering an actual
channel number each time.
CH +
VOL
–
Welcome to
Toshiba
To switch between two channels:
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons (0–9,
100).
3. Press CH RTN. The previous channel will be displayed.
Each time you press CH RTN, the TV will switch back and forth
between the two channels.
Channel
Numbers
VOL
+
MENU/
ENTER
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
CH RTN
RESET CAP/TEXT
Programming your favorite channels
DISPLAY
You can preset up to 12 of your favorite channels using the Favorite
Channel Programming feature. Because this feature scans through
only your favorite channels, it allows you to skip other channels you
do not normally watch.
You can still use Channel + / – to scan through all the channels you
programmed in the TV’s memory.
MTS
SLEEP
MUTE
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
Connecting
your TV
To program your favorite channels:
1. Select a channel you want to program.
2. Press MENU, then press or to display the OPTION menu.
3. Press ▲ or ▼ to highlight FAVORITE CH.
DVD CLEAR TOP MENU DVD MENU
CODE
POWER
DVD
CH
PICTURE AUDIO
SETUP OPTION
LANGUAGE
CH LABEL
FAVORITE CH
V-CHIP
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT
Channel
Numbers
CH +
ENGLISH
START
START
START
START
OFF
DVD
START
VOL
–
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
CH RTN
FAV
1/2
16:9
FAV
RESET CAP/TEXT
CODE
CH
FAV
FAV
VOL
DISPLAY
PICTURE AUDIO
Exit
TV/VIDEO
DVD CLEAR TOP MENU DVD MENU
MTS
SETUP OPTION
SLEEP
MUTE
Setting up
your TV
4. Press or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
RECALL
Using the
Remote Control
+10
FAVORITE CH : CH 12
SET/CLEAR
SET CLEAR
7 36
4
1
SET UP CH
12 125 63 40
13 28 97 112
TV CABLE
SELECT
SET
ENTER
END
EXIT
Using the TV’s
Features
5. Press or to highlight SET and press ENTER.
6. Press EXIT to close the screen.
7. Repeat steps 1~6 for up to 11 other channels.
To select your favorite channels:
Press the FAV ▲ ▼ buttons on the remote control to select your
favorite channels.
The FAV ▲ ▼ buttons will not work until you have programmed
your favorite channels.
Appendix
17
3N11501A[E] P17-28
17
8/1/18, 12:26
To clear your favorite channels:
1. Select a channel you want to clear.
2. Press MENU, then press or to display the OPTION menu.
3. Press ▲ or ▼ to highlight FAVORITE CH.
4. Press or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
POWER
TV
VCR
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
SETUP OPTION
VOL
–
FAVORITE CH : CH 12
SET/CLEAR
SET CLEAR
7 36
4
1
SET UP CH
12 125 63 40
13 28 97 112
TV CABLE
SELECT
SET
ENTER
END
EXIT
or
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
RECALL
VOL
5. Press
Channel
Numbers
CH +
CH
PICTURE AUDIO
CABLE
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
to highlight CLEAR.
DISPLAY
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
CODE
CH
PICTURE AUDIO
SETUP OPTION
FAVORITE CH : CH 12
SET/CLEAR
SET CLEAR
7 36
4
1
SET UP CH
12 125 63 40
13 28 97 112
TV CABLE
SELECT
CLEAR
ENTER
END
EXIT
6. Press ENTER until “0” replaces the channel number you want to
erase.
7. Press EXIT to clear the screen.
8. Repeat steps 1~6 for the other channels.
Using the V-Chip (parental control) feature
The V-Chip feature is available only for the U.S. V-Chip system. The
Canadian V-Chip system is not supported.
You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.
POWER
Selecting a PIN code
DVD
Before you can block programs and channels, you must select a
personal identification number (PIN) code. The PIN code you select
prevents others from changing the rating limits you set.
Using the TV’s
Features
To select your PIN code and access the V-Chip menus:
1. Press MENU, then press or to highlight the OPTION menu.
2. Press ▲ or ▼ to highlight V-CHIP.
+10
CH +
VOL
–
Menu/
Enter
CH –
SETUP OPTION
EXIT
LANGUAGE
CH LABEL
FAVORITE CH
V-CHIP
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT
ENGLISH
START
START
START
START
OFF
DVD
START
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
Note:
The PIN code you programmed is also used in the LOCK menu; see
pages 22 and 23.
18
3N11501A[E] P17-28
VOL
+
MENU/
ENTER
CH
PICTURE AUDIO
Channel
Numbers
18
8/1/18, 12:26
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
Exit
or
Important
Safeguards
3. Press
to display the V-CHIP menu.
CH
PICTURE AUDIO
SETUP OPTION
V-CHIP
BLOCKING
PIN CODE
[0-9]
EXIT
SET
If you forget your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu. This allows you to proceed to the
BLOCKING menu and resets your PIN code.
ENTER
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
Welcome to
Toshiba
SELECT
END
Note:
RESET
CH
PICTURE AUDIO
SETUP OPTION
Connecting
your TV
V-CHIP
ENABLE BLOCKING
SET RATING
BLOCKING OPTION
NEW PIN CODE
SELECT
ON OFF
START
START
START
ADJUST
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature
and allow you to block programs according to the rating limits you set.
Channel
Numbers
CH +
VOL
–
VOL
+
MENU/
ENTER
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
FAV
CH RTN
FAV
1/2
16:9
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
Exit
Appendix
19
19
Recall
TV/VIDEO
Using the TV’s
Features
Menu/
Enter
CH –
EXIT
3N11501A[E] P17-28
Setting up
your TV
To change your PIN code:
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight V-CHIP.
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press ▲ or ▼ to highlight NEW PIN CODE and press or to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Using the
Remote Control
5. You may now enable blocking. See “Blocking programs by ratings”
(below), “Locking channels” (page 22), “To change your PIN code”
(below), or “Blocking unrated movies or programs” (page 22).
8/1/18, 12:26
MPAA Ratings
X
NC17
R
PG13
PG
G
For adults only.
Not intended for anyone 17 or under.
Restricted. Under 17 requires an accompanying
parent or adult guardian.
Parents strongly cautioned. Some material may be
inappropriate for children under 13.
Parental guidance suggested. Some material may
not be appropriate for children.
General audience. Appropriate for all ages.
Youth TV Ratings
Y7FV, Y7
Y
Directed to older children. This program is designed
for children age 7 and above. Programs in which
fantasy violence may be more intense or combative
than other programs in this category are designated
TV-Y7-FV.
All children. This program is designed to be appropriate for all children.
Note:
TV Ratings
MA
Mature audience only. This program is specifically
designed to be viewed by adults and therefore may
be unsuitable for children under 17.
Language
Sex
Violence
14
Crude or indecent language.
Explicit sexual activity.
Graphic violence.
Parents strongly cautioned. This program contains
some material that many parents would find unsuitable for children under 14 years of age.
Dialog
Language
Sex
Violence
Using the TV’s
Features
To see the rating of the program you are
viewing, press RECALL at any time.
Intensely suggestive dialog.
Strong, coarse language.
Intense sexual situations.
Intense violence.
PG
Parental guidance suggested. This program contains
material that parents may find unsuitable for younger
children.
Dialog
Some suggestive dialog.
Language
Infrequent coarse language.
Sex
Some sexual situations.
Violence
Moderate violence.
G
General audience. Most parents would find this
program suitable for all ages.
No DLSV
Programs not rated according to Dialog, Language,
Sex or Violence.
20
3N11501A[E] P17-28
20
8/1/18, 12:26
POWER
TV
VCR
1
2
3
4
5
6
100
7
8
9
0
Important
Safeguards
To use the V-Chip to block programs by rating:
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight V-CHIP.
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER.
The BLOCKING menu appears.
CABLE
DVD
+10
Channel
Numbers
VOL
–
CH
PICTURE AUDIO
VOL
+
MENU/
ENTER
SETUP OPTION
Menu/
Enter
V-CHIP
ENABLE BLOCKING
SET RATING
BLOCKING OPTION
NEW PIN CODE
SELECT
ON OFF
START
START
START
CH –
EXIT
RECALL
VOL
ADJUST
RESET CAP/TEXT
DISPLAY
CH
MORE
SELECT
PICTURE AUDIO
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
TV RATING
X NC17 R PG13 PG G
X X X X X X
Y7FV Y7 Y
X X X
ADJUST
DIALOG
LANGUAGE
SEX
VIOLENCE
NO DLSV
V-CHIP MENU
SELECT
SETUP OPTION
MA 14 PG G
X X
X X X
X X X
X X X
X X X X
START
ADJUST
Note:
Not all programs are rated. To block programs
or movies that are unrated, see “Blocking
unrated movies or programs,” page 22.
Using the TV’s
Features
When you try to view a program with a ratings block, a message will
appear listing the program’s ratings. The program can still be viewed if
you press MUTE and then enter your PIN code to temporarily bypass
the block.
Appendix
21
21
Setting up
your TV
7. Press ▲ or ▼ to highlight MPAA Rating, Youth TV Rating or
individual TV Ratings.
8. Press or to select the ratings that will be blocked. Blocked
ratings are signified by a red “X.” Unblocked ratings are signified by
a green “✓.” As you block ratings, all ratings higher than the ones
you select are blocked, as well. For example, if you choose to
block the MPAA rating R, the higher ratings NC17 and X are
automatically blocked too.
9. When you are done selecting the ratings to be blocked, press
EXIT to return to normal viewing.
3N11501A[E] P17-28
16:9
CH
SETUP OPTION
SET RATING
MPAA
RATING
YOUTH TV
RATING
FAV
1/2
Using the
Remote Control
PICTURE AUDIO
CODE
FAV
CH RTN
Connecting
your TV
5. Press ▲ or ▼ to highlight ENABLE BLOCKING.
• Press or to highlight ON to enable V-Chip program blocking
by rating.
• Press or to highlight OFF to disable V-Chip program blocking
by rating.
6. Press ▲ or ▼ to highlight SET RATING. Then, press or to
display the SET RATING menu.
TV/VIDEO
Welcome to
Toshiba
CH +
8/1/18, 12:26
Blocking unrated movies or programs
Some movies and programs are not rated. You can block these movies
and programs using the V-Chip.
To block unrated movies or programs:
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight V-CHIP.
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER.
The BLOCKING menu appears.
5. Press ▲ or ▼ to highlight BLOCKING OPTION.
6. Press or to display the BLOCKING OPTION menu.
7. Press ▲ or ▼ to highlight MPAA UNRATED.
• Press or to highlight ON to block unrated movies.
• Press or to highlight OFF to unblock unrated movies.
8. Press ▲ or ▼ to highlight TV NONE RATING.
• Press or to highlight ON to block programs with a rating of
“TV NONE.” When you select ON, the message “NOTICE:
ENABLING THIS OPTION MAY BLOCK EMERGENCY
MESSAGES” appears.
• Press or to highlight OFF to unblock programs with a rating
of “TV NONE.”
9. Press EXIT to return to normal viewing.
Note:
Blocking television programs with a rating of
“TV NONE” may block emergency messages.
Using the LOCK menu
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAME TIMER,
and NEW PIN CODE functions.
You can use these functions after entering the correct PIN code. (This
PIN code is the same one selected under “Selecting a PIN code” on
page 18.)
POWER
TV
VCR
CABLE
Using the TV’s
Features
DVD
Locking channels
1
2
3
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
4
5
6
100
7
8
9
0
To lock channels:
1. Use the Channel Number buttons (0–9) to display the television
channel you wish to lock.
2. Press MENU, then press or to display the OPTION menu.
3. Press ▲ or ▼ to highlight LOCK.
4. Press or to display the LOCK menu.
5. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu
appears.
CH
PICTURE AUDIO SETUP OPTION
6. Press ▲ or ▼ to highlight CH LOCK
and press or to display the CH
LOCK
CH LOCK
START
LOCK menu.
OFF
VIDEO LOCK
7. Press or to select the following:
OFF
GAME TIMER
• SET– to set the channel as one to be NEW PIN CODE START
SELECT
ADJUST
locked. Then press ENTER.
• CLEAR– to clear all channels from the
list of locked channels. Then press
CH
ENTER.
PICTURE AUDIO SETUP OPTION
8. Repeat steps 1 through 7 to lock other
CH LOCK : CH 12
channels. When you are finished
SET/CLEAR
SET CLEAR
0
0 0
LOCKED
CH
locking channels, press EXIT to return
0
0 0
0
0 0
TV CABLE
to normal viewing.
SELECT
SET
ENTER
END
EXIT
If you try to tune a locked channel, the TV
will not display it, but will display the nearest
unlocked channel.
+10
CH +
VOL
–
22
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
Note:
After programming CH LOCK, change
channels before turning off the television.
22
3N11501A[E] P17-28
Channel
Numbers
8/1/18, 12:26
Important
Safeguards
Welcome to
Toshiba
To unlock channels:
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight LOCK and then press or to display
the LOCK menu.
3. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
4. Press ▲ or ▼ to highlight CH LOCK and press or to display
the CH LOCK menu.
5. Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
6. Press EXIT to return to normal viewing.
Locking video input
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
VCR
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
VOL
–
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
RECALL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
CH
PICTURE AUDIO
RESET CAP/TEXT
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
NEW PIN CODE
SELECT
VOL
SETUP OPTION
START
OFF
VIDEO VIDEO+
OFF
START
ADJUST
DISPLAY
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
CODE
SLEEP
MUTE
Note:
After programming VIDEO LOCK, change
channels or activate the TV/VIDEO key before
turning off the television.
Setting the game timer
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
Channel
Numbers
CH +
VOL
–
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
Exit
Using the TV’s
Features
To set up the game timer:
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight LOCK.
3. Press or to display the LOCK menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press ▲ or ▼ to highlight GAME TIMER.
6. Press or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
7. Press EXIT to return to normal
CH
viewing. After the GAME TIMER is
PICTURE AUDIO SETUP OPTION
programmed, the display will appear
LOCK
briefly every ten minutes to remind you
CH LOCK
START
that the GAME TIMER is operating.
OFF
VIDEO LOCK
When the programmed time is
GAME TIMER
OFF 30 60 90 120
NEW PIN CODE START
reached, the display will change the
SELECT
ADJUST
channel automatically.
POWER
Setting up
your TV
With the GAME TIMER feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
TV game (30, 60, 90 or 120 minutes).
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
Appendix
23
23
Channel
Numbers
CH +
EXIT
7. Press EXIT to return to normal viewing.
3N11501A[E] P17-28
CABLE
Using the
Remote Control
• OFF: Unlocks all video input
sources.
• VIDEO: Locks VIDEO1, VIDEO2,
VIDEO3 and COLORSTREAM.
• VIDEO +: Locks VIDEO1, VIDEO2,
VIDEO3, COLORSTREAM, channel 3
and channel 4. This option should be
used if you use the antenna terminal
to play a video tape.
TV
Connecting
your TV
To set up the video lock:
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight LOCK.
3. Press or to display the LOCK menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press ▲ or ▼ to highlight VIDEO LOCK.
6. Press or to select:
POWER
8/1/18, 12:26
Labeling channels
Channel labels appear over the channel number display each time you
turn on the TV, select a channel, or press the Recall button. You can
choose any four characters to identify a channel.
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
To create channel labels:
1. Select a channel you want to label.
2. Press MENU, then press or until the OPTION menu appears.
3. Press ▲ or ▼ to highlight CH LABEL.
+10
Channel
Numbers
CH +
CH
PICTURE AUDIO
VOL
–
SETUP OPTION
LANGUAGE
CH LABEL
FAVORITE CH
V-CHIP
LOCK
ON/OFF TIMER
COLORSTREAM
SELECT
ENGLISH
START
START
START
START
OFF
DVD
START
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
4. Press or to display the CH LABEL menu. SET/CLEAR will be
highlighted.
DISPLAY
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
CODE
SLEEP
MUTE
CH
PICTURE AUDIO
SETUP OPTION
CH LABEL : CH 12
SET/CLEAR
SET CLEAR
LABEL
SELECT
END
SET
ENTER
EXIT
5. Press or to highlight SET.
6. Press ▲ or ▼ to highlight LABEL.
CH
PICTURE AUDIO
SETUP OPTION
CH LABEL : CH 12
SET/CLEAR
SET
LABEL
Using the TV’s
Features
SELECT
END
SET
ENTER
EXIT
7. Press or to enter a character in
CH
the first space. Press the button
PICTURE AUDIO SETUP OPTION
repeatedly until the character you want
CH LABEL : CH 12
appears on the screen. Press ENTER.
SET/CLEAR
SET
8. Repeat step 7 to enter the rest of the
A
LABEL
characters.
SELECT
SET
ENTER
If you would like a blank space in the
END
EXIT
label name, you must choose an empty
space from the list of characters; otherwise, a dash will appear in
that space.
9. Repeat steps 1~8 for other channels. You can assign a label to
each channel.
10. Press EXIT to clear the screen.
Note:
The character will change as below.
–
0
Z
To erase channel labels:
1. Select a channel with a label.
2. Press MENU, then press or until the OPTION menu appears.
3. Press ▲ or ▼ to highlight CH LABEL.
4. Press or to display the CH LABEL menu.
SET/CLEAR will be highlighted.
5. Press or to highlight CLEAR.
6. Press ENTER.
7. Repeat steps 1~6 to erase other channel labels.
24
3N11501A[E] P17-28
24
8/1/18, 12:26
•••
SPACE
9
•••
A
+
–
Important
Safeguards
Setting the clock
You must set the clock before you can program the ON/OFF timer.
To set the clock: (Example: 8:30 AM)
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight ON/OFF TIMER.
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
CH
SETUP OPTION
LANGUAGE
ENGLISH
CH LABEL
START
START
FAVORITE CH
START
V-CHIP
START
LOCK
ON
OFF SET
ON/OFF TIMER
COLORSTREAM DVD
SELECT
ADJUST
SET
ENTER
CH +
VOL
–
VOL
+
MENU/
ENTER
Menu/
Enter
Welcome to
Toshiba
PICTURE AUDIO
CH –
3. Press or to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
or
RECALL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
VOL
to highlight
RESET CAP/TEXT
DISPLAY
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
CODE
SLEEP
MUTE
CH
PICTURE AUDIO
ON/OFF TIMER
CLOCK
ON TIMER
12:00 AM
SETUP OPTION
12:00 AM
Note:
CH 001
CLEAR
If the power source for the TV is interrupted (for
example, the power cord is unplugged or a
power failure occurs), you will need to reset the
clock.
OFF TIMER
12:00 AM
SELECT
END
CLEAR
ADJUST
EXIT
Using the
Remote Control
5. Press ▲ or ▼ to set the hour, then press
position.
to highlight the minute
CH
PICTURE AUDIO
ON/OFF TIMER
CLOCK
ON TIMER
12:00 AM
SETUP OPTION
8:30 AM
CH 001
CLEAR
OFF TIMER
12:00 AM
SELECT
END
CLEAR
ADJUST
POWER
TV
VCR
1
2
3
Setting the ON/OFF timer
4
5
6
100
Setting the on timer
7
8
9
0
EXIT
+10
CH +
VOL
–
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
DISPLAY
CODE
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
Using the TV’s
Features
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight ON/OFF TIMER.
3. Press or to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
4. Press ▲ or ▼ to highlight ON TIMER and press or to highlight
the hour position.
Setting up
your TV
To set the on timer: (Example: Turning on the TV to channel 12 at
7:00 AM, DAILY)
CABLE
DVD
6. Press ▲ or ▼ to set the minutes, then press EXIT to return to
normal viewing.
This feature allows you to program the TV to turn on automatically at a
set time. If you program the ON TIMER to “DAILY,” the TV will turn on
every day at the same time to the same channel until you clear the ON
TIMER.
Connecting
your TV
4. Press ▲ or ▼ to highlight CLOCK, then press
the hour position.
EXIT
Note:
CH
PICTURE AUDIO
After a power failure or disconnection of the
power, the timer settings will be lost.
SETUP OPTION
12:00 AM
Appendix
ON/OFF TIMER
CLOCK
ON TIMER
12:00 AM
CH 001
CLEAR
OFF TIMER
12:00 AM
SELECT
END
CLEAR
ADJUST
EXIT
25
3N11501A[E] P17-28
25
8/1/18, 12:26
5. Press ▲ or ▼ to set the desired hour, then press
.
POWER
TV
VCR
1
2
3
4
5
6
100
7
8
9
0
CABLE
DVD
+10
CH +
6. Set the desired minutes and channel, as in step 5.
7. Press or to select ONCE or DAILY timer date.
VOL
–
VOL
+
MENU/
ENTER
Menu/
Enter
CH –
EXIT
RECALL
VOL
TV/VIDEO
FAV
CH RTN
FAV
Exit
Note:
The ON TIMER has a one-hour automatic
shut off. One hour after the ON TIMER has
turned on the TV, the TV will turn off
automatically unless you press any button or
have set the OFF TIMER.
8. Press EXIT to return to normal viewing.
To cancel the on timer:
Select CLEAR in step 7 above.
Press EXIT to return to normal viewing.
Setting the off timer
This feature allows you to program the TV to turn off automatically at a set
time. If you program the OFF TIMER to “DAILY,” the TV will automatically
turn off every day at the same time.
To set the off timer: (Example: Turning off the TV at 11:30 PM)
1. Press MENU, then press or to display the OPTION menu.
2. Press ▲ or ▼ to highlight ON/OFF TIMER.
3. Press or to highlight SET, then press ENTER.
The ON/OFF TIMER menu appears.
4. Press ▲ or ▼ to highlight OFF TIMER, then press or to
highlight the hour position.
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
CH +
5. Press ▲ or ▼ to set the desired hour, then press
VOL
–
.
RECALL
VOL
Using the TV’s
Features
6. Set the desired minutes, as in step 5.
7. Press or to select ONCE or DAILY.
8. Press EXIT to return to normal viewing.
To cancel the off timer:
Select CLEAR in step 7 above.
Press EXIT to return to normal viewing.
26
3N11501A[E] P17-28
26
Menu/
Enter
CH –
EXIT
VOL
+
MENU/
ENTER
8/1/18, 12:26
TV/VIDEO
FAV
CH RTN
FAV
Exit
Important
Safeguards
Adjusting the picture quality
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint, and sharpness. The
qualities you choose will be stored automatically in your TV’s memory
so you can recall them at any time.
To adjust the picture quality:
1. Press MENU, then press or
POWER
1
2
3
4
5
6
100
7
8
9
0
+10
to display the PICTURE menu.
CH +
SETUP OPTION
64
32
32
0
32
VOL
–
RECALL
FAV
CH RTN
FAV
1/2
16:9
RESET CAP/TEXT
DISPLAY
Pressing
Exit
DVD CLEAR TOP MENU DVD MENU
MTS
CODE
higher
lighter
deeper
greenish
sharper
TV/VIDEO
VOL
Reset
MUTE
SLEEP
Note:
Watching video input
You can use the TV/VIDEO button on the remote control to view a
signal coming from other devices, such as VCRs or video disc players
that may be connected to your TV. (See “Connecting your TV” on page
7.)
To select the input mode:
Press the TV/VIDEO button repeatedly to
select the desired mode. The signal source
you are connected to is displayed in light blue.
TV
COLOR
STREAM
Selecting the ColorStream® mode
POWER
TV
VCR
1
2
3
4
5
6
100
7
8
9
0
CABLE
DVD
+10
Note:
CH +
12:00 AM
STEREO
SAP
VOL
–
RECALL
VOL
RESET CAP/TEXT
DISPLAY
27
FAV
CH RTN
FAV
1/2
16:9
Recall
MTS
8/1/18, 12:26
SLEEP
MUTE
Appendix
CODE
TV/Video
TV/VIDEO
DVD CLEAR TOP MENU DVD MENU
27
3N11501A[E] P17-28
Menu
CH –
EXIT
MPAA
X
VOL
+
MENU/
ENTER
(TV)
CABLE 007
ABCD
Using the TV’s
Features
The factory setting is DVD.
Displaying on-screen information
VIDEO 3
Setting up
your TV
You can use the ColorStream (component video) input for connecting
either a DVD player or a DTV receiver.
1. Press MENU, then press or until
the OPTION menu appears.
CH
2. Press ▲ or ▼ to highlight
PICTURE AUDIO SETUP OPTION
COLORSTREAM.
LANGUAGE
ENGLISH
3. Press or to highlight DVD or
CH LABEL
START
START
FAVORITE CH
DTV, depending on which device is
START
V-CHIP
START
LOCK
connected.
OFF
ON/OFF TIMER
COLORSTREAM DVD DTV
4. Press EXIT to return to normal viewing. SELECT
ADJUST
VIDEO 2
VIDEO 1
Using the
Remote Control
To reset the picture adjustments to the factory
settings, press RESET.
4. Press EXIT to return to normal viewing.
Press RECALL to display the following
on-screen information:
• Clock
• Channel number or VIDEO mode
selected
• Channel label (if preset)
• Stereo or SAP (second audio program)
audio status
• Content rating
Connecting
your TV
2. Press ▲ or ▼ until the item you want to adjust is highlighted.
3. Press or to adjust the level.
lower
darker
paler
reddish
softer
Menu
CH –
EXIT
contrast
brightness
color
tint
sharpness
VOL
+
MENU/
ENTER
ADJUST
Selection
CABLE
Welcome to
Toshiba
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
SELECT
VCR
DVD
CH
PICTURE AUDIO
TV
Setting the sleep timer
POWER
You can set the TV so it turns off automatically.
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0.
VCR
1
2
3
4
5
6
100
7
8
9
0
+10
CH +
VOL
–
RECALL
VOL
To view captions or text:
1. Select the desired program. Closed captioned programs are
usually marked in your local TV listing as “CC.”
2. Press CAP/TEXT repeatedly to select caption or text mode.
RESET CAP/TEXT
DISPLAY
FAV
1/2
16:9
MTS
SLEEP
MUTE
1/2
16:9
CAP/TEXT
Sleep
Note:
A closed caption signal may not be decoded
in the following situations:
• when a video tape has been dubbed
• when the signal reception is weak
• when the signal reception is non-standard
When you choose a closed captioned channel
and the text mode, the text screen always
appears as a black box. When there is no
signal, however, the text screen will not
display text characters. Repeatedly press
CAP/TEXT until the box disappears.
6-:6 +0
Changing the picture size
You can change the picture size to 16:9 (widescreen) style.
Using the TV’s
Features
FAV
CH RTN
DVD CLEAR TOP MENU DVD MENU
CODE
4. To turn off the closed caption feature, press CAP/TEXT
repeatedly until captions or text no longer display on-screen.
To view 16:9 style:
Select the desired program, then press 16:9. The picture size will
be displayed 16:9 style. “16:9” will appear on the screen for approx.
4 seconds.
To cancel 16:9 style:
Press 16:9 again. The picture size will return to 4:3 style.
16:9
16:9 Widescreen
28
28
TV/VIDEO
6-:6 +0
3. Press 1/2 to select the caption or text channel.
3N11501A[E] P17-28
Menu
CH –
EXIT
You have two options with the closed caption feature: captions or text.
A caption is a printed version of the dialogue, narration and/or sound
effects of a program. Text is information not related to the program that
appears on half of the TV screen when available.
4:3 Normal
VOL
+
MENU/
ENTER
Using the closed caption feature
CABLE
DVD
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of
time until the TV turns off. The clock will count down 10 minutes for
each press of the SLEEP button (120, 110, ...10, 0). After the sleep
time is programmed, the display will appear briefly every ten minutes
to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily
displayed.
TV
8/1/18, 12:27
Important
Safeguards
Adjusting the sound
POWER
POWER
TV
TV
VCR
VCR
1
2
3
4
5
6
100
7
8
9
0
Muting the sound
CABLE
CABLE
DVD
DVD
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, press MUTE again.
+10
Selecting stereo/SAP broadcasts
You can listen to high-fidelity stereo sound with the Multi-channel TV
Sound (MTS) feature. MTS can also transmit a second audio program
(SAP) containing a second language or other audio information.
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
The MTS feature is not available in the VIDEO mode.
VOL
VOL
––
Welcome to
Toshiba
CH
CH++
VOL
VOL
++
MENU/
MENU/
ENTER
ENTER
CH
CH––
EXIT
EXIT
RECALL
TV/VIDEO
RECALL TV/VIDEO
DVDVOL
MENU
RESET
CAP/TEXT
RESET CAP/TEXT
FAV
FAV
CH
CH RTN
RTN
FAV
FAV
1/2
1/2
16:9
16:9
Recall
DISPLAY DVD
DVD CLEAR
CLEAR TOP
TOP MENU
MENU DVD
DVD MENU
MENU
CODE
CODE
MTS
MTS
SLEEP
SLEEP
MUTE
MUTE
Mute
MTS
Connecting
your TV
You can leave your TV in STEREO mode because it will automatically
output stereo or monaural sound, depending on the broadcast type. If
the stereo sound is noisy, select MONO to reduce the noise. The word
STEREO or SAP is displayed in light blue when the TV receives the
signal.
To select the desired MTS setting:
STEREO
SAP
MONO
MONO + SAP
Using the
Remote Control
Repeatedly press the MTS button to select either STEREO, SAP,
MONO+SAP, or MONO. If the current program is not available in stereo
or SAP, the setting will not be available when you press the MTS
button.
Setting up
your TV
If the current program is not broadcasting either stereo or SAP, those
settings will not be available when you press the MTS button.
Using the TV’s
Features
Appendix
29
3N11501A[E] P29-BACK
29
8/1/18, 12:27
Adjusting the sound quality
POWER
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, then press
or
TV
VCR
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
until the AUDIO menu appears.
CH +
CABLE
VOL
–
VOL
+
MENU/
ENTER
Menu
CH –
EXIT
RECALL
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
VOL
2. Press ▲ or ▼ to highlight the item you want to adjust.
3. Press or to adjust the level.
RESET CAP/TEXT
DISPLAY
DVD CLEAR TOP MENU DVD MENU
MTS
CODE
SLEEP
Reset
MUTE
Note:
To reset the audio adjustments to the factory
settings, press RESET.
makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
• makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
•
Using the BBE sound feature
By correcting the phase delay and distortion naturally generated by
speaker systems, the BBE sound feature ensures that the sound that
reaches your ears is as natural as the original sound. Human voices
are clearer and music is natural and well-defined.
POWER
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
To turn on the BBE sound feature:
1. Press MENU, then press or until the AUDIO menu appears.
2. Press ▲ or ▼ to highlight BBE.
3. Press or to highlight ON.
CH +
VOL
–
VOL
+
MENU/
ENTER
Menu
Using the TV’s
Features
CH –
EXIT
RECALL
VOL
RESET CAP/TEXT
DISPLAY
30
FAV
1/2
16:9
MTS
SLEEP
MUTE
BBE and the BBE symbol are trademarks of
BBE Sound, Inc.
Licensed by BBE Sound, Inc. under
USP4638258 and 4482866.
Manufactured under license from BBE Sound,
Inc.
30
3N11501A[E] P29-BACK
FAV
CH RTN
DVD CLEAR TOP MENU DVD MENU
CODE
To turn off the BBE sound feature:
Highlight OFF in step 3 above.
TV/VIDEO
8/1/18, 12:27
Important
Safeguards
Using the surround sound feature
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV’s speakers. The
feature uses stereo signals from a TV broadcast or video input.
TV
VCR
CABLE
1
2
3
4
5
6
100
7
8
9
0
DVD
+10
CH +
VOL
–
VOL
+
MENU/
ENTER
Menu
CH –
EXIT
VOL
RESET CAP/TEXT
DISPLAY
CODE
TV/VIDEO
FAV
CH RTN
FAV
1/2
16:9
DVD CLEAR TOP MENU DVD MENU
MTS
SLEEP
MUTE
To turn off the surround sound feature:
Highlight OFF in step 4 above.
Connecting
your TV
RECALL
Welcome to
Toshiba
To turn on the surround sound feature:
1. Select the STEREO mode, if available (see “Selecting stereo/SAP
broadcasts” on page 29.)
2. Press MENU, and then press or until the AUDIO menu
appears.
3. Press ▲ or ▼ to highlight SURROUND.
4. Press or to highlight ON.
POWER
In general, you can leave your TV in surround mode because it will
automatically output the type of sound being broadcast (surround
stereo or monaural).
Using the
Remote Control
Using the StableSound® feature
The StableSound feature limits the highest volume level to prevent
extreme changes in volume when the signal source is changed.
To turn on the StableSound® feature:
1. Press MENU, then press or until the AUDIO menu appears.
2. Press ▲ or ▼ to highlight STABLE SOUND.
3. Press or to highlight ON.
Setting up
your TV
To turn off the StableSound® feature:
Highlight OFF in step 3 above.
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its
broadcast for the day and stops broadcasting on that channel. This feature does not work in VIDEO mode.
Using the TV’s
Features
Auto power off
Understanding the Power Return feature
31
3N11501A[E] P29-BACK
31
8/1/18, 12:27
Appendix
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV
on automatically.
If the power is going to be off for a long time or you are going to be away from home for a long time, unplug the power cord
from the wall outlet to prevent the TV from turning on in your absence.
Appendix
Troubleshooting
Appendix
Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.
Problem
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
• Check the antenna/cable connections.
• This TV will not accept or display 480p or 720p progressive scan
signals or 1080i interlaced high-definition signals through its
ColorStream inputs. Switch the other device’s output to 480i interlaced
mode first (see page 9).
No sound, picture OK
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
• The MTS feature may be in SAP mode. Press the MTS button on the
remote control until STEREO (or MONO) mode is active.
Poor sound, picture OK
• The station may have broadcast difficulties. Try another channel.
• The MTS feature may be in SAP mode. Press the MTS button on the
remote control until STEREO (or MONO) mode is active.
Poor picture, sound OK
•
•
•
•
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button is set correctly.
Cannot receive above channel 13
• Make sure TV/CABLE is set to CABLE mode.
Unable to select a certain channel
• The channel may be blocked by the V-Chip feature or CH LOCK
feature, or erased with the add/erase feature.
Cannot access signal input sources (Video1,
Video2, Video3 and ColorStream) and/or
Channels 3 and 4
• Check the VIDEO LOCK feature.
Multiple images
• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the picture
could suffer from color shading. If so, turn off the TV and allow it to cool
for several hours before turning it on again.
Black box on screen
• Repeatedly press CAP/TEXT to turn off the Closed Caption Text mode.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
The V-Chip PIN code does not work
(U.S. V-Chip system only)
• Change or reset your PIN code (pages 18 and 19).
The remote control does not operate
• Make sure the TV/VCR/DVD/CABLE mode is set properly.
• Remove all obstructions between the remote control and the TV.
• The remote control batteries may be dead. Replace the batteries.
3N11501A[E] P29-BACK
Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the PICTURE menu.
This TV will not accept or display 480p or 720p progressive scan
signals or 1080i interlaced high-definition signals through its
ColorStream inputs. Switch the other device’s output to 480i interlaced
mode first (see page 9).
32
32
8/1/18, 12:27
Important
Safeguards
Specifications
Picture Tube
Type 27 (676.6 mm diagonal)
Television system
NTSC standard
Channel coverage
VHF: 2 ~ 13
Welcome to
Toshiba
UHF: 14 ~ 69
Cable TV: 4A, A-5 ~ A-1, A-I,
J ~ W, W+1 ~ W+84
120V AC, 60 Hz
Power consumption
135 W
Audio power
5.0W + 5.0W
Speaker type
1-13/16 x 3-7/8 inches (46 x 99 mm) x 2 pcs.
Video/Audio terminals
S-VIDEO INPUT
Connecting
your TV
Power source
Y-INPUT: 1V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)
ColorStream® (component video) INPUT
PR: 0.7V (p-p), 75 ohm
PB: 0.7V (p-p), 75 ohm
VIDEO/AUDIO OUTPUT
VIDEO: 1V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47k ohm)
Dimensions
Using the
Remote Control
Y: 1V (p-p), 75 ohm
Width: 29-1/8 inches (740 mm)
Height: 22-5/8 inches (574.5 mm)
Depth: 19-1/2 inches (495 mm)
88.2 Ibs. (40 kg)
Supplied accessories
Remote control with two size “AAA” batteries
Setting up
your TV
Weight
Design and specifications are subject to change without notice.
Using the TV’s
Features
Appendix
33
3N11501A[E] P29-BACK
33
8/1/18, 12:27
Limited United States Warranty
for 27'' FST PURE® and All Larger Television Models
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems
are not covered by these warranties. Reception problems
caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above and do not extend to any television or parts that
have been lost or discarded by you or to damage to television or
parts caused by misuse, accident, Acts of God (such as lightning
or fluctuations in electric power), improper installation, improper
maintenance, or use in violation of instructions furnished by
TACP/THI; or to units that have been modified or had the serial
number removed, altered, defaced, or rendered illegible.
Toshiba America Consumer Products, L.L.C. (“TACP”) and Toshiba
Hawaii, Inc. (“THI”) make the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES
EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR
ANY PERSON RECEIVING THIS TELEVISION AS A GIFT FROM
THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor*
TACP/THI warrant this television and its parts against defects in
materials or workmanship for a period of one (1) year after the date
of original retail purchase. DURING THIS PERIOD, TACP/THI
WILL, AT TACP/THI'S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. TACP/THI
Authorized Service Station personnel will come to your home
when warranty service is required. Depending on the type of repair
required, either the service will be performed in your home or the
set will be taken to the TACP/THI Authorized Service Station for
repair and returned to your home at no cost to you.
Limited Two (2) Year Warranty on Picture Tube*
TACP/THI further warrant the picture tube in this television against
defects in materials or workmanship for a period of two (2) years
after the date of original retail purchase. DURING THIS PERIOD,
TACP/THI WILL, AT TACP/THI'S OPTION, REPAIR OR REPLACE
A DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED
PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT, IF
A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED
AFTER ONE (1) YEAR FROM THE DATE OF THE ORIGINAL
RETAIL PURCHASE, YOU PAY LABOR CHARGES INVOLVED
IN THE REPAIR OR REPLACEMENT.
Rental Units
The warranty for rental units begins with the date of first rental
or thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
Appendix
Owner’s Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this television.
Complete and mail the enclosed product registration card within ten
days after you, or the person who has given you this product as a
gift, purchased this television. Returning the product registration
card will enable TACP/THI to provide you with better customer
service and improved product support. Failure to return the product
registration card will not affect your rights under this warranty.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TACP/THI Service Station.
(3) The warranties from TACP and THI are effective only if the
television is purchased and operated in the U.S.A. or Puerto
Rico.
3N11501A[E] P29-BACK
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
(1) To find the nearest TACP/THI Authorized Service Station:
For televisions purchased in the United States, except Hawaii,
visit TACP’s web site at www.toshiba.com/tacp, or call toll
free 1-800-631-3811.
For televisions purchased in Hawaii, contact Toshiba Hawaii, Inc.,
327 Kamakee Street, Honolulu, HI 96814, (808) 591-9281.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Station. Authorized TACP/THI Service Station
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either the
service will be performed in your home or the set will be taken to
the Authorized Service Station for repair and returned to your
home at no cost to you.
For additional information, visit TACP’s web site:
www.toshiba.com/tacp.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TACP OR THI WITH RESPECT TO
THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TACP OR THI BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES.
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in
any manner whatsoever. The time within which action must be
commenced to enforce any obligation of TACP or THI arising under
this warranty or under any law of the United States or of any state
thereof is hereby limited to 90 days from the date you discover, or
should have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF
AN IMPLIED WARRANTY, LIMITATIONS ON THE TIME WITHIN
WHICH AN ACTION MAY BE BROUGHT, OR THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES; THEREFORE, THE ABOVE LIMITATIONS OR
EXCLUSIONS MAY NOT APPLY TO YOU UNDER SUCH
CIRCUMSTANCES.
FST PURE® is a registered trademark of Toshiba America Consumer Products, L.L.C.
REV. MAR02
34
34
8/1/18, 12:27
for 27'' FST PURE® and All Larger Television Models
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if the television is
purchased in Canada from an authorized TCL dealer and
operated in Canada.
35
3N11501A[E] P29-BACK
35
8/1/18, 12:27
Appendix
FST PURE® is a registered trademark of Toshiba America Consumer Products, L.L.C.
REV. MAR02
Using the TV’s
Features
Owner’s Manual
Read this owner’s manual thoroughly before operating this television.
Setting up
your TV
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
Using the
Remote Control
Limited Two (2) Year Warranty on Picture Tube*
TCL further warrants the picture tube in this television against
defects in materials or workmanship for a period of two (2) years
after the date of original retail purchase. DURING THIS PERIOD,
TCL WILL, AT TCL'S OPTION, REPAIR OR REPLACE A
DEFECTIVE PICTURE TUBE WITH A NEW OR REFURBISHED
PICTURE TUBE WITHOUT CHARGE TO YOU, EXCEPT THAT,
IF A DEFECTIVE PICTURE TUBE IS REPAIRED OR REPLACED
AFTER ONE (1) YEAR FROM THE DATE OF THE ORIGINAL
RETAIL PURCHASE, YOU PAY LABOR CHARGES INVOLVED
IN THE REPAIR OR REPLACEMENT.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and
checking the “Troubleshooting” section, you find that service is
needed:
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
web site: www.toshiba.ca.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Depot. Authorized TCL Service Depot
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either the
service will be performed in your home or the set will be taken
to the Authorized Service Depot for repair and returned to your
home at no cost to you. IN-HOME SERVICE ONLY APPLIES
WITHIN 100 KILOMETERS OF AN AUTHORIZED TCL
SERVICE DEPOT.
For additional information, visit TCL’s web site:
www.toshiba.ca
ALL WARRANTIES IMPLIED BY THE LAW OF ANY PROVINCE
OF CANADA, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF
THE LIMITED WARRANTIES SET FORTH ABOVE. WITH THE
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW
OF ANY PROVINCE OF CANADA AS HEREBY LIMITED, THE
FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND
SIMILAR OBLIGATIONS OF TCL WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT
SHALL TCL BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES.
No person, agent, distributor, dealer, or company is authorized
to change, modify, or extend the terms of these warranties in
any manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof,
is hereby limited to 90 days from the date you discover, or should
have discovered, the defect. This limitation does not apply to implied
warranties arising under the law of any province of Canada.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY
VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS ON
THE DURATION OF AN IMPLIED WARRANTY, LIMITATIONS
ON THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT,
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
Connecting
your TV
Limited One (1) Year Warranty on Parts and Labor*
TCL warrants this television and its parts against defects in materials
or workmanship for a period of one (1) year after the date of original
retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL'S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A
NEW OR REFURBISHED PART WITHOUT CHARGE TO YOU
FOR PARTS OR LABOR. TCL Authorized Service Depot personnel
will come to your home when warranty service is required.
Depending on the type of repair required, either the service will
be performed in your home or the set will be taken to the TCL
Authorized Service Depot for repair and returned to your home at
no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100
KILOMETERS OF AN AUTHORIZED TCL SERVICE DEPOT.
Welcome to
Toshiba
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems
are not covered by these warranties. Reception problems
caused by inadequate antenna systems are your responsibility.
(5) Warranties extend only to defects in materials or workmanship
as limited above and do not extend to any television or parts that
have been lost or discarded by you or to damage to television or
parts caused by misuse, accident, Acts of God (such as lightning
or fluctuations in electric power), improper installation, improper
maintenance, or use in violation of instructions furnished by TCL;
or to units that have been modified or had the serial number
removed, altered, defaced, or rendered illegible.
Important
Safeguards
Limited Canada Warranty
National Service Division
Service Centers:
!
" # ! ! $%&
!# '( ) * !
"
# (# +%! %&
! #" *
!
" ColorStream®, FST Pure® and StableSound® are registered
trademarks of Toshiba America Consumer Products, L.L.C.
PRINTED IN THAILAND
04/01
3N11501A[E] P29-BACK
36
L
36
8/1/18, 12:27