advertisement
2012-05-21
OSLON Signal 80
Datasheet
Version 1.1
LV CK7P
•
Package: SMD ceramic package with silicon resin with lens
•
ESD-withstand voltage: 8 kV acc. to
JESD22-A114-F
•
Gehäusetyp: SMD Keramik Gehäuse mit
Silikonverguss und Linse
•
Technology: ThinGaN • Technologie: ThinGaN
•
Color: verde green (505 nm)
•
Farbe: verde grün (505 nm)
•
ESD-Festigkeit: 8 kV nach JESD22-A114-F
•
Viewing angle at 50 % I
V
: 80°
•
Abstrahlwinkel bei 50 % I
V
: 80°
Applications
• Traffic Lights and Signaling
• General Lighting indoor and outdoor
• Medical Lighting
• Marker Lights
Anwendungen
• Ampel- und Signalanlagen
• Allgemeinbeleuchtung innen und außen
• Medizinische Beleuchtung
• Marker Lights
2012-05-21 1
Version 1.1
LV CK7P
Ordering Information
Bestellinformation
Type
Typ
LV CK7P-JYKZ-25
I
F
= 350 mA
Φ
V
[lm]
52 ... 112
Ordering Code
Bestellnummer
Q65111A2323
Note:
Anm.:
be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LV CK7P-JYKZ-25 means that only one group
JY, JZ, KX, KY, KZ will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where color chromaticity coordinate groups are measured and binned, single groups will be shipped on any one packing
nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LV CK7P-JYKZ-25 bedeutet, dass in einer
Verpackungseinheit nur eine der Helligkeitsgruppen JY, JZ, KX, KY, KZ enhalten ist. Um die Liefersicherheit zu gewährleisten, können einzelne
Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Farbortgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Farbortgruppe
zu gewährleisten, können einzelne Farbortgruppen nicht bestellt werden.
2012-05-21 2
Version 1.1
LV CK7P
Maximum Ratings
Grenzwerte
Parameter
Bezeichnung
Operating temperature range
Betriebstemperatur
Storage temperature range
Lagertemperatur
Junction temperature for short time applications *
Sperrschichttemperatur für
Kurzzeitanwendung *
Junction temperature
Sperrschichttemperatur
Forward current
Durchlassstrom
(T
S
= 25 °C)
Surge current
Stoßstrom
(t <= 10
μs; D = 0.005; T
S
= 25 °C)
Reverse voltage
Sperrspannung
(T
S
= 25 °C)
I
I
Symbol
Symbol
T
T
T
T
F
V j j op stg
FM
R
Values
Werte
-40 ... 120
-40 ... 120
175
120
30 ... 1000
2000
°C mA mA not designed for reverse operation V
Note: *The LED chip exhibits excellent performance but slight package discoloration occurs at highest
temperatures. Exemplary median lifetime for Tj = 175°C is 100h.
Anm: *Auch bei höchsten Temperaturen zeigt der LED Chip sehr gute Leistungsmerkmale, aber es kann
eine leichte Verfärbung des Gehäuses auftreten. Die mittlere Lebensdauer bei T
j
= 175°C beträgt
100h.
Unit
Einheit
°C
°C
°C
2012-05-21 3
Version 1.1
LV CK7P
Characteristics (T
S
= 25 °C; I
F
= 350 mA)
Kennwerte
Parameter
Bezeichnung
Wavelength at peak emission
Wellenlänge d. emittierten Lichtes
Dominantwellenlänge
(typ.)
(min.)
(typ.)
(max.)
(typ.) Spectral bandwidth at 50% I rel max
Spektrale Bandbreite b. 50% I rel max
Viewing angle at 50 % I
V
Abstrahlwinkel bei 50 % I
V
(typ.)
(min.)
(typ.)
(max.)
Reverse current
Sperrstrom
Real thermal resistance junction /
Realer Wärmewiderstand
Sperrschicht / Lötpad
"Electrical" thermal resistance junction / solder point
"Elektrischer" Wärmewiderstand
Sperrschicht / Lötpad
(with efficiency
η e
= 20 %)
(typ.)
(max.)
(typ.)
(max.)
Symbol Values
Symbol Werte
λ peak
λ dom
λ dom
λ dom
Δλ
2 ϕ
V
F
V
F
V
F
I
R
R th JS real
R th JS real
R th JS el
R th JS el
503
498
505
512
30
80
2.70
3.30
3.70
not designed for reverse operation
7
9.4
6
8
Unit
Einheit
nm nm nm nm nm
°
V
V
V
K/W
K/W
K/W
K/W
2012-05-21 4
Version 1.1
LV CK7P
JY
JZ
KX
KY
KZ
Brightness Groups
Helligkeits-Gruppierungsschema
Group Luminous Flux
Gruppe Lichtstrom
(min.)
Φ
V
[lm]
52
61
71
82
97
Luminous Flux
Lichtstrom
(max.)
Φ
V
[lm]
61
71
82
97
112
Luminous Intensity
Lichtstärke
(typ.) I
V
[cd]
18.6
21.7
25.2
29.4
34.4
Note:
Anm.:
The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered.
Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar.
Chromaticity coordinate groups
Farbortgruppen
0.9
Cy
0.8
520
530
0.7
0.6
500
0.5
510
4
3
2
5
0.4
0.3
490
0.2
0.1
0
0
480
470
460
450
540
550
E
560
570
580
590
600
610
620
630
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
Cx
Green EN12368 EU STANDARD 2006
Green ITE 2005 USA
0.70
Cy
0.68
0.66
0.64
0.62
0.60
0.58
0.56
0.54
0.52
0.50
0.48
0.46
0.44
0.42
0.40
0.38
0.36
4
3
2
5
Cx
OHA03829
2012-05-21 5
Version 1.1
Cx Cy
2
Group
Gruppe
0.0474
0.4618
3
4
0.0541
0.0789
0.1150
0.1180
0.0474
0.0480
0.1180
0.1250
0.0480
0.4070
0.4000
0.4000
0.4537
0.4618
0.5134
0.4537
0.5134
0.5134
Group Name on Label
Gruppenbezeichnung auf Etikett
Example: JY-2
Beispiel: JY-2
Brightness
Helligkeit
JY
Group
Gruppe
4
5
Wavelength
Wellenlänge
2
Note:
Anm.:
No packing unit / tape ever contains more than one group for each selection.
In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
Cx
0.0570
0.1250
0.1300
0.0570
0.0700
0.1300
0.1500
LV CK7P
Cy
0.6080
0.5134
0.5476
0.6080
0.6756
0.5476
0.6175
2012-05-21 6
Version 1.1
Relative Spectral Emission - V(
λ) = Standard eye response curve
Relative spektrale Emission - V(
λ) = spektrale Augenempfindlichkeit
Φ rel
= f (
λ); T
S
= 25 °C; I
F
= 350 mA
LV CK7P
I
rel
1.0
: yellowish green
: V
λ
0.8
LV CK7P
0.6
0.4
0.2
400 450
I rel
= f ( ϕ); T
S
= 25 °C
500
-20°
550 600 650 700 750 800
λ [nm]
-10°
LV CK7P ϕ
[°]
0° 10° 20° 30° 40° 50° 60° 70° 80° 90°
1.0
I rel
-30°
-40°
0.8
-50°
0.6
-60°
0.4
-70°
-80°
0.2
0.0
-90°
-100°
2012-05-21 7
Version 1.1
Forward Current
I
F
= f (V
F
); T
S
= 25 °C
LV CK7P
I
F
[mA]
1000
800
600
400
200
2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8
U
F
[V]
Chromaticity Coordinate Shift
Farbortverschiebung
Cx, Cy = f(I
F
); T
S
= 25 °C
LV CK7P
Cx
Cy
: Cx
: Cy
0.6
0.5
0.4
0.3
0.2
0.1
200 400 600
I
800
F
1000
[mA]
2012-05-21 8
LV CK7P
Φ
V
/
Φ
V
(350 mA) = f(I
F
); T
S
= 25 °C
Φ
V
Φ
V
(350 mA)
2.0
LV CK7P
1.5
1.0
0.5
0.0
200 400 600 800
1000
I
F
[mA]
Version 1.1
Relative Forward Voltage
Relative Vorwärtsspannung
ΔV
F
= V
F
- V
F
(25°C) = f(T j
); I
F
= 350 mA
LV CK7P
ΔU
F
[V]
0.4
0.2
0.0
-0.2
-0.4
-40 -20 0 20 40 60 80 100 120
T
j
[°C]
Chromaticity Coordinate Shift
Farbortverschiebung
Cx, Cy = f(T j
); I
F
= 350 mA
LV CK7P
Cx
Cy
0.6
: Cx
: Cy
0.5
0.4
0.3
0.2
0.1
-40 -20 0 20 40 60 80 100 120
T
j
[°C]
2012-05-21 9
LV CK7P
Relative Lichtstrom
Φ
V
/
Φ
V
(25 °C) = f(T j
); I
F
= 350 mA
Φ v
Φ v
(25 °C)
1.2
LV CK7P
1.0
0.8
0.6
0.4
0.2
0.0
-40 -20 0 20 40 60 80 100 120
T
j
[°C]
Version 1.1
LV CK7P
Max. Permissible Forward Current
Maximal zulässiger Durchlassstrom
I
F
= f (T)
LV CK7P
I
F
[mA]
1100
1000
900
800
700
600
500
400
: T
S
300
200
100
Do not use below 30 mA
0
0 20 40 60 80 100 120
T
S
[°C]
Permissible Pulse Handling Capability
Zulässige Impulsbelastbarkeit I
F
= f(t p
)
D: Duty cycle, T
S
= 25 °C
OHL04184
I
F
2.1
A
1.9
D
=
t
P
T t
P
T
I
F
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
D
=
0.005
0.01
0.02
0.05
0.1
0.2
0.33
0.5
1
0.9
0.8
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
p s 10
2
Permissible Pulse Handling Capability
Zulässige Impulsbelastbarkeit I
F
= f(t p
)
D: Duty cycle, T
S
= 85 °C
OHL04183
I
F
2.1
A
1.9
D
=
t
P
T t
P
T
I
F
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
D
=
0.005
0.01
0.02
0.05
0.1
0.2
0.33
0.5
1
1.0
0.9
0.8
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
p s 10
2
2012-05-21 10
Version 1.1
Package Outline
Maßzeichnung
LV CK7P
Approximate Weight:
Gewicht:
Mark:
Markierung:
ESD information:
ESD Information:
20 mg
20 mg
Cathode
Kathode
LED is protected by ESD device which is connected in parallel to LED-Chip.
Die LED enthält ein ESD-Bauteil, das parallel zum
Chip geschalten ist.
2012-05-21 11
Version 1.1
Recommended Solder Pad
Empfohlenes Lötpaddesign
Reflow soldering
Reflow-Löten
LV CK7P
Notes:
Anmerkungen:
Package not suitable for ultra sonic cleaning.
Das Gehäuse ist für Ultraschallreinigung nicht geeignet.
2012-05-21 12
Version 1.1
Reflow Soldering Profile
Reflow Lötprofil
Preconditioning JEDEC Level 1 acc. to J-STD-020D.01
300
˚C
T
250
240 ˚C
217 ˚C
200
150
t
S
100
50
0
0
25 ˚C
50 100 150
t
P
t
L
LV CK7P
OHA04525
T
p
245 ˚C
200 250
t
s 300
Profil-Charakteristik
Profile Feature
Symbol
Symbol
Pb-Free (SnAgCu) Assembly
Ramp-up Rate to Preheat*
)
25 °C to 150 °C
Time t
S
T
Smin
to T
Smax
Ramp-up Rate to Peak*
)
T
Smax to T
P
Liquidus Temperature
Time above Liquidus temperature t
S
Minimum
60
Recommendation
2
100
2
T
L t
L
217
80
Peak Temperature
T
P
245
Time within 5 °C of the specified peak temperature T
P
- 5 K t
P
10 20
Ramp-down Rate*
T
P to 100 °C
Time
25 °C to T
P
3
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation
DT/Dt: Dt max. 5 s; fulfillment for the whole T-range
Maximum
3
120
3
100
260
30
6
480 s
K/s
K/s s
°C s
°C s
OHA04612
Einheit
Unit
K/s
2012-05-21 13
Version 1.1
Method of Taping
LV CK7P
2012-05-21 14
Version 1.1
Tape and Reel
Gurtverpackung
12 mm tape with 600 pcs. on
∅ 180 mm reel
W
1
D
0
P
2
P
0
LV CK7P
P
1
Direction of unreeling
W
2
Label
Gurtvorlauf:
Leader:
400 mm
400 mm
Gurtende:
Trailer:
160 mm
160 mm
Direction of unreeling
OHAY0324
Tape dimensions in mm (inch)
Tape dimensions in mm (inch)
W P
0
P
1
12 +0.3/-0.1
4 ± 0.1
(0.157 ±
0.004)
4 ± 0.1
(0.157 ±
0.004) or
8 ± 0.1
(0.315 ±
0.004)
Reel dimensions in mm (inch)
Reel dimensions in mm (inch)
A W
180 (7) 12 (0.472)
P
2
2 ± 0.05
(0.079 ±
0.002)
N min
60 (2.362)
D
0
1.5 ± 0.1
(0.059 +
0.004)
W
1
0.079)
E
1.75 ± 0.1
(0.069 ±
0.004)
12.4 + 2 (0.488 +
F
5.5 ± 0.05
(0.217 ±
0.002)
W
2max
18.4 (0.724)
2012-05-21 15
Version 1.1
Barcode-Product-Label (BPL)
Barcode-Produkt-Etikett (BPL)
OSRAM Opto
Semiconductors
LX XXXX
BIN1: XX-XX-X-XXX-X
RoHS Compliant
(6P) BATCH NO:
1234567890
ML
2
Temp ST
260 °C R
(1T) LOT NO:
1234567890
(9D) D/C:
1234
Pack: R18
DEMY 022
B_R999_1880.1642 R
(X) PROD NO:
123456789
(Q)QTY:
9999
(G) GROUP:
XX-XX-X-X
LV CK7P
OHA04563
Dry Packing Process and Materials
Trockenverpackung und Materialien
Moisture-sensitive label or print
Barcode label
. S he
. A lf life ft re er
in th w a
s
, v e
) M e p a u o b ) S
3
. D al
is p te to
) H b
4
C
O
b a d
op d re um
)
. I e a la
w
re a ba
A
T
M
n ith id
IS
T
O S
g:
2 m e u ire r 2b ing ed e
U
T his b
, in
1 0
In re fe n
B ag a
D d flo e
F
is
ag
R
b
IO
E
a in o
M
M
a te is o
M
on
SE
nt h a s ev w lo
R ica
re
c
e ic o to t m u e I C
s ea te a
M l d n d tu
t r c tim
N ta
N
t < g
, b r ir
E
L re tu is
IT
DU
w ha t u d e
se
C
, d e e
L re tu iva e fo
IV
C
ill re el 1 e
L
˚C le
b e
is
E
TO
R
a be su
m o
S
< bje e
9 ss t f a un tin
0%
re cte he d in g o ry
, g
3 fo
C
JS
T -0 (if bla pe n re e e
L n
˚C el
>
2 e e
).
o
0 a l 3
% w
F lo
F
r n to e o o lo a r b a o d a n , s m
E
L
la ak n
V
E
e
pa a
If h red ition t 2
3 e
p ce e
Y
1 e
W
L
la um a o s
˚C
± re d u te e e id y ( g
M
F lo r tim
> e im
1 e
Y
1 ea
8 H ou rs
R H
).
˚C /6
3 0
0%
5
˚C
, o
ide ois o tic n tur ist o
M a re u is w re
R ith
L
H a
L e e 4 te d
c o e
F ev
M oi tu re e e
L l 5 e
6 loo
F r lo
F tim r tim o lo e tim o
7 e
H o rs u
2
4
H
2 4 im e 6 u
H rs o
H rs u rs
OSRAM
Humidity indicator
Barcode label uately dry.
MIL-I-8835
Humidity Indicator change desiccant parts still adeq bake units examine units, if necessary check dot Comparator bake units examine units, if necessary
Discard if circles overrun.
bag opening.
Avoid metal contact.
Do not eat.
Please check the HIC immidiately after
Desiccant
OSRAM
OHA00539
Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter “Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem
Trockenmittel und einer Feuchteindikatorkarte.
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form
Catalog im Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind
Normenbezüge, unter anderem ein Auszug der JEDEC-Norm, enthalten.
2012-05-21 16
Version 1.1
Transportation Packing and Materials
Kartonverpackung und Materialien
LV CK7P
Barcode label Barcode label
1 . S helf
2.
A fter re life b dy o a)
in this
s ap
M
3.
ag is p tem ou b) S or nted to a) H
4. I
w
at red um a f ba
AU
C
O
d ba
o a
-ph
M O
P
ned, ithi
re idi kin refer
IS
T
n q ty en
B ag s
D
ba
TU
O
m o s
de flow re
In is ce ate
M
S
e ba
, se
1
0% di
re eal
d
an ois
M
T
R
n th lo o
R ca q tur o
M
IO on g c
IC
EM
, o r e r c
H in tor o t m u
C a te d oi
EN
O
e ire
/J
tim
L ee b e
s re befo e L e tu re stu
M ois
N tain
N D
at <
th q r tim e g,
C d, e op re tu ev
Lev re
s
40 at w uiv od e t.
S
IT
EC
J el
IV
UC
ill rd is
˚C
be s nt p
> ene
2 el
Lev
E
e
S
OR
an
˚C ub ro
).
low o
1 d:
2a un
0 loor
Flo
9 c si ces a t f ting
wh
-S
T D-
03
Flo
F ted
(if b
tim or t lo y
, if en
rea d a
3 fo r b
> e im c lank
1 Y e or ti
L E
V
L
la
b
R H) m idi ty (
0%
rela ng (p ac tor ak e p
,
1 Y e m tiv itio ond se e
hu e frar k pa ar ea d k age s o
˚C t 23 ro ce l d ate
4
W ee
1
68 H ks re tur ois
M tu o
R H
3 0 ˚C
/6
0%
±
5 ˚C
, o dure
is i
M tic den ois
M tu ois
M al w ith d
Leve e Le ve
Le ture ate ve
Le l 5 ve
c
F od lo r ti o
Flo
F r tim lo or
F m lo e e
ti m e or
2 H e
48
tim ou rs
H
24 ou
Ho
6 rs urs
Ho urs l 6
Mu
LS
Y T lti
TO
67
PL
Bin
ED
1:
Bin
P1-2
2:
Bin
Q-
3:
ML
1-2 mp
2a
S
0 C
22
R
26
R
0 C
R al
TE XT
Ad dit
R0
77
PA CK
VA R:
DE
R1
MY
(G ) G
RO UP
P-
1+
Q-
OS
M O
RA pto uc to rs
Se mi co nd
(6P ) B
AT CH
N O:
021
998
23
(1T ) L
OT N
12
3G H1
) P
RO D
NO
1
0
(9D
) D /C
01
44
)Q TY
: 2
00
Mu
LS Y T lti TO
Bin
67
PL
ED
1:
Bin 2: 3:
Bin
ML
Te mp
22
2a
S
0 C
24
R
0 C
0 C
R XT al TE
DE dit ion
Ad 77 CK
PA
VA
R:
R1
(G ) G
UP
MY
1+
Q-
OS
RA M O
Sem ico cto rs
N O:
(6P ) B
AT CH
(1T
210021998
3G
) L
N O:
12
H1
23
(X ) P
D
NO
(9D
) D /C
01 44
)Q
(Q
TY
: 2
00
4 5
OSRAM
Packing
Sealing label
OHA02044
Dimensions of transportation box in mm (inch)
Width
/
Breite
195 ±5 (7,677 ±0,1968)
Length
/
Länge
195 ±5 (7,677 ±0,1968)
Height
/
Höhe
30 ±5 (1,181 ±0,196)
Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class
Moderate risk (exposure time 0,25 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices.
As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.
Hinweise
Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Im
Risikogruppensystem dieser CIE- Norm erfüllen die in diesem Datenblatt angegebenen LEDs folgende
Gruppenanforderung - Moderate risk
(Expositionsdauer 0,25s). Unter realen Umständen
(für Expositionsdauer, Augenpupille,
Betrachtungsabstand) geht damit von diesen
Bauelementen keinerlei Augengefährdung aus.
Grundsätzlich sollte jedoch erwähnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundäres Gefahrenpotenzial besitzen.
Nach einem Blick in eine helle Lichtquelle (z.B.
Autoscheinwerfer), kann ein temporär eingeschränktes Sehvermögen oder auch
Nachbilder zu Irritationen, Belästigungen,
Beeinträchtigungen oder sogar Unfällen führen.
2012-05-21 17
Version 1.1
LV CK7P
Disclaimer
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
Due to technical requirements components may contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS.
*) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system.
**) Life support devices or systems are intended(a) to be implanted in the human body,or(b) to support and/or maintain and sustain human life.If they fail, it is reasonable to assume that the health and the life of the user may be endangered.
Disclaimer
Bitte beachten!
Lieferbedingungen und Änderungen im Design vorbehalten. Aufgrund technischer Anforderungen können die Bauteile Gefahrstoffe enthalten. Für weitere
Informationen zu gewünschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb.Falls Sie diese Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet.
Verpackung
Benutzen Sie bitte die Ihnen bekannten
Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nächstgelegene
Vertriebsbüro. Wir nehmen das Verpackungsmaterial zurück, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Für
Verpackungsmaterial, das unsortiert an uns zurückgeschickt wird oder das wir nicht annehmen müssen, stellen wir Ihnen die anfallenden Kosten in
Rechnung.
Bauteile, die in lebenserhaltenden Apparaten und
Systemen eingesetzt werden, müssen für diese
Zwecke ausdrücklich zugelassen sein!
Kritische Bauteile* dürfen in lebenserhaltenden
Apparaten und Systemen nur dann eingesetzt werden, wenn ein schriftliches Einverständnis von OSRAM OS vorliegt.
*) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems führen wird oder die Sicherheit oder
Effektivität dieses Apparates oder Systems beeinträchtigt.
**) Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper oder
(b) für die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist.
2012-05-21 18
Version 1.1
LV CK7P
Glossary
1)
2)
Brightness
: Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3).
3)
Forward Voltage
: The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3).
4)
5)
6)
Wavelength
: The wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of ± 0,5 nm and an expanded uncertainty of ± 1 nm (acc. to GUM with a coverage factor of k=3).
Thermal Resistance
: Rth max based on statistic values (6ó)
Typical Values
: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.
Chromaticity coordinate groups
:
Chromaticity coordinates are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,005 and an expanded uncertainty of +/- 0,01 (acc. to GUM with a coverage factor of k = 3).
Glossar
1)
Helligkeit
: Helligkeitswerte werden während eines
Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gemäß GUM mit Erweiterungsfaktor k =
3).
2)
Wellenlänge
: Die Wellenläge wird während eines
Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von ± 0,5 nm und einer erweiterten Messunsicherheit von ± 1 nm gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
3)
Durchlassspannung
: Vorwärtsspannungen werden während eines Strompulses einer typischen
Dauer von 8 ms, mit einer internen
Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gemäß GUM mit Erweiterungsfaktor k=3).
4)
Wärmewiderstand
: Rth max basiert auf statistischen Werten (6ó)
5)
Typische Werte
: Wegen der besonderen
Prozessbedingungen bei der Herstellung von LED können typische oder abgeleitete technische
Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen
Produktes überein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen
Kennlinien unterscheiden können. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankündigung geändert.
6)
Farbortgruppen
:
Farbkoordinaten werden während eines
Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,005 und einer erweiterten Messunsicherheit von +/- 0,01 gemessen (gemäß GUM mit Erweiterungsfaktor k =
3).
2012-05-21 19
Version 1.1
LV CK7P
Glossary
7)
8)
Relative Brightness Curve
: In the range where the line of the graph is broken, you must expect higher brightness differences between single
LEDs within one packing unit.
Thermal Resistance
: RthJA results from mounting on PC board FR 4 (pad size 16mm
2
per pad)
8)
Glossar
7)
Relative Helligkeitskurve
: Im gestrichelten
Bereich der Kennlinien muss mit erhöhten
Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden.
Wärmewiderstand
: RthJA ergibt sich bei
Montage auf PC-Board FR 4 (Padgröße 16mm
2
je pad)
9)
Tolerance of Measure
: Dimensions are
Maßtoleranz
: Maße werden wie folgt specified as follows: mm (inch).
angegeben: mm (inch).
2012-05-21 20
Version 1.1
LV CK7P
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.
2012-05-21 21
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement