PENTAX
Optio W30
Thank you for purchasing this PENTAX
Digital Camera.
This camera is provided with waterproof
performance and dustproof performance
functions in compliance with JIS Class 8
waterproof performance and Class 5
dustproof performance (equivalent to IP
58), and as well as being continuously
usable underwater for up to 2 hours at a
depth of 3 m, it can also be used in dusty
or dirty locations.
1 Preparing the Camera for Use
Prepare your camera for use before you begin
using it.
Attach the strap
supplied with the
camera as shown
in the illustration.
@installing the Battery Battery cover lock lever
and SD Memory Gard
Install the battery and SD
Memory Card as shown in
the illustration.
SD Memory
Card socket
Battery SD Memory Card
lock lever 0
Battery
The parts under the battery/card cover are not waterproof
@ In surroundings where the camera may be exposed to water
or dirt, such as underwater, at the beach, in the kitchen, etc.,
make sure the battery lock lever is firmly locked and the cover
does not open unexpectedly. Do not under any circumstances
open the cover in such places.
@ When removing the battery or card, avoid surroundings where
the camera may be exposed to water or dirt, and make sure the
camera, battery, card, and your hands are completely dry.
Checking the Contents of the Package )
Check that your camera comes complete with
the items listed below.
[_] Camera (Optio W30)
[] AV cable (I-AVC7)
[1 PC connection manual
[1 Operating manual
[1] Strap (O-ST20)
[1 Rechargeable lithium-ion
battery (D-LI63)
Wi Quick guide (this guide)
2 Turning the Camera On
The camera turns on
and is ready to take
{
still pictures. Press the
power switch again to
turn the camera off.
OSetting the Language, Date and Time
Set the language, date and time when using the camera for the first
time.
O Use the four-way controller
(AV pp) to choose the
display language.
O Press the OK button.
(Memo )
Language/Æ75
English Dansk — Русский
Français Svenska Ing
Deutsch Finnish “*t=0|
Español Polish Хх
Portugués Czech FX
Italiano Hungarian AX#
Nederlands Türkce
MENU Cancel (ОК) ОК
If you accidentally select another
language, press the four-way
controller ( pp), use the four-way
controller ( A W € p>) to select
the language, and then press
the OK button. The Initial Setting
screen appears in the selected
language.
[ Initial Setting |
Language/575 English »
{Hometown
New York [DSEF
MENUCancel (OK) OK
Names of Parts and Monitor Indicators
Shutter release button
Power switch,
power indicator
Flash
Speaker
Lens
Microphone
Self-timer lamp
LCD monitor
[>] button
9 ©
ADC),
SL DEN Terminal cover
- —F e lock lever
—
MENU button
Tripod socket
PC/AV terminal
DC input terminal
Terminal cover
button
In this Quick Guide,
the arrow keys to be
pressed are <
expressed as
indicated on the right.
Press the four-way controller [initial Setting
(Y) to move the frame to
[Hometown]. Language/S5& English
{Hometown
New York [D&E »
MENU Cancel (OK) OK
4) Press the four-way controller ( }> ) to display the Hometown screen.
O Use the four-way controller (< )) to choose the city.
O Press the four-way controller (W ) to move the frame to [DST]
(Daylight Saving Time).
O Use the four-way controller (< )>) to select Y (On) or 1 (Off).
8) Press the OK button to display the Initial Setting screen.
O Press the OK button.
(10) Use the four-way controller ( AV) to select [Date Style].
Following indicators are displayed in the Still Picture Capture Mode.
Digital zoom icon Memory status
Focus mode Pe] Built-in memory
Drive mode (without card)
Flash mode [1 SD Memory Card
Shooting mode 51 Card is write-protected
“— Remaining
{image storage
capacity
Battery
indicator
frame
т a Na Date and
Camera о Ve 01401 | time
shake icon [ERAN {dl A
Normal display in the Stil
Picture Capture Mode World time setting
EV compensation
Battery Level Indicator
You can check the battery level by the {& indicator on the LCD monitor.
Screen Display Battery Status
(green) | Adequate power remains.
(green) Battery is running low.
[INE] (yellow) Battery is running very low.
[NN] (red) Battery is exhausted.
[Battery depleted] | The camera will turn off after this message appears.
D Press the four-way controller | | Date Adjust |
(p>) to select [mm/dd/yy], then =
use the four-way controller (A ||Date Style ‘ mm/dd/yy 24h
W ) to choose the date and =
time display style. Date 01/01/2007
© Press the four-way controller ||Time 0:00
(D>) to select [24h], then use
the four-way controller (4. W) | MENUCancel OK
to select [24h] (24-hour display)
or [12h] (12-hour display).
© Press the four-way controller ( >), then press the four-way
controller ( W ) to move the frame to [Date].
Press the four-way controller ( p> ) to select [01] (month), [01]
(day) or [2007] (year), then use the four-way controller ( AVY)
to set the date to the current day.
Ф Press the four-way controller ( p>), then press the four-way
controller ( Y ) to move the frame to [Time].
DB Set the time in the same manner as in O.
D Press the OK button.
Use this camera to format (initialize) an SD Memory Card that is unused
or has been used on another camera or digital devices. Be sure that
formatting will delete all the data stored in the SD Memory Card. For how
to format an SD Memory Card, refer to the Operating Manual (p. 164).
3 Taking Pictures
Aim the camera at the subject, then press the
shutter release button. The flash fires automatically
depending on the light conditions.
O Frame the subject using the focus frame on the LCD monitor.
O Use the Zoom/ 444 / 4 button to change the captured area.
widens the area
that is captured
by the camera
enlarges
the subject
O Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the
subject is in focus.
O Press the shutter release
button fully.
The picture is taken.
A Playing Back Images
You can play back the images taken on the LCD monitor.
O Press the [>] button after taking a picture.
The image appears on the LCD monitor.
1100-0038
01/01/2007
14:25 |
(Memo )
® To playback the previous or next image, press the four-way controller
(<>).
© Pressing LE on the Zoom / E / Q button simultaneously displays 9
thumbnail images. If you press E again, while the thumbnail images
are being displayed, you can switch to folder display or calendar
display mode. For details, refer to the Operating Manual (p. 119).
Each time you press the four-way controller ( ), the flash mode switches
between the following modes.
BA Auto
v
(&) Flash Off
+
E Flash On
+
OA Auto + Red-eye
+
OF Flash On + Red-eye
+
SORT Soft Flash
(Memo )
For details, refer to the Operating Manual (p. 87).
Each time you press the four-way controller ( A ), the drive mode switches
between the following modes.
M] Standard (single-frame)
. +
>» Self timer (10 sec.)
Deleting a Single Image
You can delete a single image currently displayed on the LCD monitor.
O Playback the image you want to delete.
O Press the Tf button.
The confirmation screen appears.
4 Delete —
-al |
O Use the four-way controller ( AW ) to select [Delete].
O Press the OK button.
(Memo)
® To select Q) (Self-timer (2 sec.)), select ©) (Self-timer (10 sec.)) first,
then press the four-way controller (W №).
e [= (Continuous Shooting) and § (Interval Shooting) can be selected in
some shooting modes.
e In (Eres), = (Continuous Shooting) and & (Interval Shooting) cannot be
selected.
e For details, refer to the Operating Manual (p. 76 - 79).
Each time you press the four-way controller ( p>), the focus mode switches
between the following modes.
AF Standard
+
WY Macro
+
MA Infinity
+
PF Pan Focus
MF Manual Focus
(Memo )
For details, refer to the Operating Manual (p. 85).
Deleting All Images
You can delete all the images at once.
O Press the TU button twice while the image is played back.
The confirmation screen appears.
“Delete All
Cancel
O Use the four-way controller ( AV) to select [Delete All].
O Press the OK button.
(Memo )
® You can protect stored images from being accidentally deleted.
® You can recover images that were taken with this camera and then
deleted. For details, refer to the Operating Manual (p. 133).
You can choose the right mode for your particular situation
from the Capture Mode Palette.
Press
andscape
Use the four-way controller (AV « p>)
to choose a shooting mode, then
press the OK button.
(Memo )
A shooting mode guide appears about 2 seconds after the
shooting mode is chosen.
For details of how to use
the Optio W30, instruc-
tions on connecting the
camera to a computer,
refer to the manuals
below.
You can choose the playback function
you want to use with the Playback
Mode Palette.
Press (nove) while an image is
displayed in playback mode. PENTAX
Optio W30
Operating Manual
Slideshow,
Optio W30
Operating Manual
Use the four-way controller (AV « p>)
to choose a playback mode, then PENTAX
press the OK button.
(Memo )
A playback mode guide appears
about 2 seconds after the playback
mode is chosen.
Optio w30
PC Connection
Manual
PC Connection Manual
PENTAX Corporation — http://www.pentax.co.jp PENTAX (Schweiz) AG — http://www.pentax.ch
PENTAX Europe GmbH (European Headquarters) PENTAX Scandinavia AB —http://www.pentax.se
HQ — http://www.pentaxeurope.com
Germany — http://www.pentax.de PENTAX Imaging Company
A Division of PENTAX of America, Inc.
PENTAX U.K. Limited — http://www.pentax.co.uk http://www.pentaximaging.com
PENTAX France S.A.S. —— http://www.pentax.fr PENTAX Canada Inc. http://www.pentax.ca
57871
Printed in China 01 - 200701
">
