Pentax FA 24mm f/2 AL (IF), FA 28mm f/2.8AL, FA 31mm f/1.8AL Limited, FA 35mm f/2AL, FA 43mm f/1.9 Limited, FA 50mm f/1.4, FA 50mm f/1.7, FA 77mm f/1.8 Limited, FA 85mm f/1.4 (IF), FA 135mm f/2.8 (IF), FA 200mm f/2.8ED (IF), FA 300mm f/2.8ED (IF), FA 300mm f/4.5ED (IF) Operating manual

Below you will find brief information for camera lens FA 24mm f/2 AL (IF), camera lens FA 28mm f/2.8AL, camera lens FA 31mm f/1.8AL Limited, camera lens FA 35mm f/2AL, camera lens FA 43mm f/1.9 Limited, camera lens FA 50mm f/1.4, camera lens FA 50mm f/1.7, camera lens FA 77mm f/1.8 Limited, camera lens FA 85mm f/1.4 (IF). This user manual allows you to properly use your new lens and make sure you understand how to mount, focus and adjust the aperture on it. It also provides information on using your lens with filters and lens hoods.

PDF
Document
Pentax FA 24mm f/2 AL (IF), FA 28mm f/2.8AL, FA 31mm f/1.8AL Limited, FA 35mm f/2AL, FA 43mm f/1.9 Limited  Operating Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Autofocus and manual focus mode

  • Aperture control (manual and auto)

  • Focus range limiter

  • Infrared index for infrared photography

  • Lens hood and filter compatibility

  • Zoom ring for changing focal length

  • Power zoom function for faster focusing

  • Compatibility with Pentax cameras

  • Clamp screw for manual focusing

  • Tripod mount for stability

Frequently asked questions

Align the red dots on the lens and camera body, and then turn the lens clockwise until it clicks into place.

Turn the aperture ring to align the aperture-A index with the line while depressing the Aperture-A-lock button.

The infrared index is used to adjust focus when taking infrared pictures with infrared film and either a "R2" or "02" filter.

Make sure to use a proper size lens hood specially designed for your lens.

Turn the focus limiter to "LIMIT" with the focusing ring at infinity, the focusing range is set to long-distance range, and do the same with the focusing ring at minimum distance for short-distance range.

The clamp screw is used when focusing manually to prevent the rotation of the focusing ring due to the lens's own weight and avoid any shift in focus.

To position the camera vertically or horizontally, loosen the camera position shift lock screw, turn the camera 90° to the right or left as desired, and tighten the lock screw firmly.

Preparing document for printing…
0%