Trendnet TE100-S16 16-Port 10/100Mbps Switch Datasheet

16-port 10/100Mbps NWay Switch

(Rack Mount)

TE100-S16

TRENDnet’s TE100-S16 is a high performance auto-sensing NWay switch that automatically negotiates between 10Base-T and

100Base-TX network speeds. All ports support half- and full-duplex that allows maximum network performance. It is designed to eliminate unnecessary traffic and relieve congestion on critical network paths. Designed and built to increase network bandwidth,

TRENDnet’s TE100-S16 is the best solution for both corporate and small business network environments.

FEATURES

• Compliant with IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX

• Support 16 UTP/STP RJ-45 10/100Mbps NWay auto-sensing ports

• Auto-MDIX on each port

• Supports store and forward switching architecture with non-blocking full wire-speed performance

• Half- and full-duplex operation for each port

• Supports aging function and 802.3x flow control for full-duplex mode and back pressure flow control for half-duplex mode operation

• Auto-learning of network configuration

• Built-in 8K entries per device for Filtering Address Table

• 512KB per device RAM buffer

• Plug and Play

• EIA-19 Rack Mountable

• 5-Year warranty

BENEFITS

Easy Upgrade:

Ethernet workgroups are able to upgrade to Fast Ethernet by changing adapters and hubs without changing switches.

Flexibility:

All ports automatically negotiate 10/100Mbps network speed. All ports are Auto-MDIX; connection can be made with either a straight through or a crossover cable.

Cost Effectiveness:

Provide 10/100Mbps of Fast Ethernet at an affordable rate.

Performance:

Top performance at an affordable price.

TE100-S16 rev:01.02.2007

16-port 10/100Mbps NWay Switch (Rack Mount)

TE100-S16

SPECIFICATIONS

Hardware

Standards

Connectors

Network Cables

Cable Length

Protocols

Data Transfer Rate

Data RAM Buffers

Filtering Address Table

Internal Power Adapter

Diagnostic LEDs

Weight

Dimensions

Temperature

Humidity

Certifications

NETWORKING SOLUTIONS

• IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, ANSI/IEEE 802.3 NWay auto-negotiation

• 16 10/100Mbps shielded RJ45 Auto-MDIX ports

• Ethernet: Cat. 3,4,5, UTP/STP, EIA.ITA-568 100 Ohm

• Fast Ethernet: Cat. 5, UTP/STP, EIA/TIA-568 100 Ohm

• 100 meters maximum

• CSMA/CD

• Ethernet: 10Mbps (Half-Duplex), 20Mbps (Full-Duplex)

• Fast Ethernet: 100Mbps (Half-Duplex), 200Mbps (Full-Duplex)

• 512KB per device

• 8K entries per device

• 100 ~ 240 VAC, 6 watts max

• Power, Link/Activity, 100Mbps

• approximately 2.0 Kg (4.4 lb.)

• 440 x 140 x 44 mm (17.3 x 5.51 x 1.73 inches) (W x H x D)

• Operating: 0°~ 40°C (32°~ 104°F)

• Storage: -10°~ 70°C (14°~ 158°F)

• Operating:10% ~ 90% RH

• Storage: 5% ~ 90% RH

• FCC Class A, CE Mark A, VCCI-A

16-Port 10/100Mbps Fast Ethernet Switch

(TE100-S16)

RELATED PRODUCTS

TE100-S16

TE100-S24

TE100-S16V

TE100-S24V

TE100-SFXM

16-port 10/100Mbps NWay Switch (Rack Mount)

24-Port 10/100Mbps NWay Fast Ethernet Switch

16-port 10/100Mbps Smart Switch

24-port 10/100Mbps Smart Switch

SC-Type Slide-in Fiber module for TE100-S32+/SxxV

10/100Mbps Multi-Port

Print Server

(TE100-P21)

Laptop with PC Card

(TE100-PCBUSR)

Internet

Workstations with PCI Adapter

(TE100-PCIWN)

Server with PCI Adapter

(TE100-PCIWA)

Cable/DSL

Modem Router Printers

ORDERING INFORMATION

20675 Manhattan Place,Torrance, CA 90501 USA

Tel: 1-310-961-5500

Fax: 1-310-961-5511

Web: www.trendnet.com

Email: [email protected]

To Order Please Call:

1-888-326-6061

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com.