advertisement
Operating Instructions
& Installation Instructions
Washing Machine
(Domestic use)
Model No.
NA - 148VB3
NA - 147VB3
NA - 128VB3
NA - 127VB3
®
Thank you for purchasing this appliance.
- For optimum performance and safety, please read these instructions carefully.
- Before connecting, operating or adjusting this appliance, please read the instructions completely. Please keep this manual for future reference.
Read Before Using 02
SAFETY PRECAUTIONS 04
Washing Instructions 14
Optional Functions 22
Maintenance 23
Troubleshooting 27
Installation Instructions 31
NA-148VB3_ENG.indb 1 2011-3-14 18:07:19
Consider the Environment
Disposing of packaging
The packaging used to protect the washing machine from damage during transportation is all recyclable. For information on recycling, contact your local authority.
Disposing of Waste
Electrical & Electronic
Equipment
Information on disposal for users of waste electrical & electronic equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis.
Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated disposable point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
2 - Read Before Using
Information on disposal in other countries outside the European Union
This symbol is only valid in the European
Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Eco-friendly Laundry
Keep to the load limit of each programme.
The washing machine automatically adjusts the operating time of each programme depending on the load.
You only need to use a preliminary wash if your laundry is heavily soiled.
Using the 60°C Cotton programme instead of the 90°C Cotton one will save energy, and will remove ordinary stains.
For lightly soiled laundry, using the 15°C
Wash programme instead of the 40°C
Quick programme will save more energy.
Detergent amount
Use the correct amount of detergent based on the detergent pack instructions and local water hardness.
Adjust the amount of detergent depending on how soiled your laundry is.
When using a tumble dryer
To save energy, please select the correct spin-dry revolution speed according to the instruction of your tumble dryer.
This product complies with the directives
2006/95/EC and 2004/108/EC.
NA-148VB3_ENG.indb 2 2011-3-14 18:07:20
Read Before Using
Consider the Environment. . . . . . . . 2
SAFETY PRECAUTIONS . . . . . . . . 4
Checking Your Washing Machine . . 7
Your washing machine . . . . . . . . . . . . .7
Accessories. . . . . . . . . . . . . . . . . . . . . .7
Before You Start Washing . . . . . . . . 8
Checking before use . . . . . . . . . . . . . . .8
Before initial use . . . . . . . . . . . . . . . . . .8
Preparing the laundry . . . . . . . . . . . . . .8
Adding Detergent and Other
Chemicals . . . . . . . . . . . . . . . . . . . . 9
Detergent compartment . . . . . . . . . . . .9
Softener compartment. . . . . . . . . . . . .11
Prewashing compartment . . . . . . . . . .11
Using the Buttons and Dials . . . . . 12
Unlocking the door . . . . . . . . . . . . . . .13
Washing Instructions
Washing. . . . . . . . . . . . . . . . . . . . . 14
Setting washing. . . . . . . . . . . . . . . . . .14
Required time . . . . . . . . . . . . . . . . . . .15
Setting the buzzer . . . . . . . . . . . . . . . .15
Changing settings while washing . . . .15
Selecting the Programme . . . . . . . 16
Power and Water Consumption. . . 17
Details of Programmes . . . . . . . . . 18
Washing Delicates. . . . . . . . . . . . . 20
Wool programme. . . . . . . . . . . . . . . . .20
Wool laundry loads . . . . . . . . . . . . . . .20
Tips for washing delicates. . . . . . . . . .20
Washing Blankets and Bedspreads . . . . . . . . . . . . . . 21
Bedding programme . . . . . . . . . . . . . .21
Putting bedding into the drum . . . . . . .21
Optional Functions. . . . . . . . . . . . . 22
Extra Rinse function . . . . . . . . . . . . . .22
Child lock. . . . . . . . . . . . . . . . . . . . . . .22
Preset timer. . . . . . . . . . . . . . . . . . . . .22
Contents
Maintenance
Maintenance . . . . . . . . . . . . . . . . . 23
Cleaning the outside of the appliance. . . . . . . . . . . . . . . . . . . . . . .23
Cleaning the door seal and window . .23
Cleaning the drain filter . . . . . . . . . . . .23
Cleaning the drum. . . . . . . . . . . . . . . .24
Cleaning the detergent drawer . . . . . .24
Cleaning the water-supply filter. . . . . .26
Preventing a frozen water-supply hose . . . . . . . . . . . . . . . . . . . . . . . . . .26
Troubleshooting
Fault Checklist. . . . . . . . . . . . . . . . 27
Error Display . . . . . . . . . . . . . . . . . 30
Installation Instructions
Choosing the Right Location . . . . . 31
Carrying the appliance . . . . . . . . . . . .31
The right place for the appliance. . . . .31
Installing a built-in washing machine. .31
Moving and Installing. . . . . . . . . . . 32
Removing the anchor bolts . . . . . . . . .32
Moving the appliance . . . . . . . . . . . . .32
Levelling the appliance . . . . . . . . . . . .33
Connecting Hoses and Power
Supply . . . . . . . . . . . . . . . . . . . . . . 34
Hoses and cable lengths. . . . . . . . . . .34
Water-supply hose . . . . . . . . . . . . . . .34
Water-drain hose. . . . . . . . . . . . . . . . .35
Connecting to the power supply . . . . .36
Checking After Installation. . . . . . . 37
Installation checklist . . . . . . . . . . . . . .37
Specifications . . . . . . . . . . . . . . . . 38
NA-148VB3_ENG.indb 3
Read Before Using - 3
2011-3-14 18:07:20
SAFETY PRECAUTIONS
Please read and follow these safety precautions.
WARNING
This describes issues which could cause death or serious injury.
General Use
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do NOT place a stand or a chair close to the appliance.
Children may be able to reach the control panel or climb onto or into the appliance.
Turn off the water supply to the appliance if it is not going to be used for a prolonged period, such as during a holiday. This is especially important if there is no drainage around the appliance.
If the water supply is left on, the water pressure may unnecessarily increase and result in a leak.
Do NOT install the appliance in a damp location or in a location exposed to the weather.
This may result in malfunction, deterioration, electric shock, or fire.
Do NOT pour or spill water directly onto any part of the appliance.
This may result in malfunction, electric shock, or fire.
Keep sources of ignition, such as candles or cigarettes, away from the appliance.
They may cause a fire or damage to the appliance.
Keep flammable materials away from the appliance, for example, gasoline, thinner, alcohol, or clothing soaked with these materials.
They may cause an explosion or a fire.
4 - Read Before Using
NA-148VB3_ENG.indb 4 2011-3-14 18:07:21
Power source and cable
Unplug the mains lead when cleaning the appliance.
Check the mains lead and mains plug for any damage.
If the mains lead is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person to aviod a hazard.
Do NOT use a mains plug adaptor or extension cable. There is a possibility of overheating which may cause a fire. Use an unused household mains socket, fully rated at AC 220 V to 240 V. If you are not sure, contact a qualified electrician.
ENSURE the mains plug is fully inserted into the household mains socket. If the mains plug is not fully pushed in, a loose connection may overheat and cause an electric shock or fire.
Do NOT touch the mains lead or mains plug with wet hands.
Possibility of an electric shock.
Do NOT pull the mains lead but hold the mains plug to unplug the appliance.
Otherwise, there is possibility of damage to the mains lead, which may lead to an electric shock or fire.
SAFETY PRECAUTIONS
To Prevent Injury
The installation of the appliance should be done by the manufacturer’s dealer or service agent.
If the installation, test run and inspection of the appliance are not carried out following the installation method outlined in these instructions, the manufacturer will not be liable for any accident or damage caused.
Do NOT dismantle, repair or modify the appliance.
There is a possibility the appliance may malfunction which may result in a fire or an injury. If repairs are needed, contact your local Customer Communication
Centre.
Do NOT touch the laundry inside the drum until it has completely stopped, as there is a possibility of injury. Keep children away from the rotating laundry.
NA-148VB3_ENG.indb 5
Read Before Using - 5
2011-3-14 18:07:21
SAFETY PRECAUTIONS
CAUTION
This describes issues which could cause injury or damage your belongings.
General Use
Prior to use, turn on the tap and check the hose and connections for any leaks.
Improper connection could cause leaks.
The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
This appliance is only suitable for textiles labelled washing machine washable.
Do not connect to the hot water supply.
This appliance works ONLY with cold water.
Do NOT apply pesticide, hair spray or deodorant to the appliance.
Do NOT put any electrical equipment, for example, TVs, radios or battery chargers, on or near the appliance.
Do NOT put too much laundry or detergent into the appliance.
This may cause damage to the appliance.
REMOVE the anchor bolts before installing the appliance using a spanner or similar tool. The anchor bolts are used to transport the appliance.
If the anchor bolts are not removed, the appliance will strongly vibrate during use.
To Prevent Injury
Do NOT climb onto the appliance.
This may cause injury or damage to the appliance.
Keep fingers away from the door hinge when opening and closing the door.
Do NOT slide your hand (or unprotected foot) underneath the appliance when in use.
Check all washing and remove all objects such as nails, pins, coins, clips, metal wires, etc.
They may cause damage to other laundry or the appliance.
Do NOT use the appliance to wash waterproof sheets or clothing. There is a possibility of excessive vibration or failure during the spin-drying cycle that may result in an injury, damage to the appliance or a water leak.
BE CAREFUL when draining hot water or any detergent out of the drum.
BE CAREFUL not to get laundry caught in the door seal when it is closed. This may result in a water leak or damage to the laundry during the wash cycle.
6 - Read Before Using
NA-148VB3_ENG.indb 6 2011-3-14 18:07:21
Your washing machine
Detergent drawer
(see page 9)
Checking Your Washing Machine
Drum
(Washing/ spin-drying tub)
Door seal
Door
Mains lead/
Mains plug
Water-drain hose
Adjustable feet
(see page 33)
Drain filter cover
(see page 23)
Caution
Do NOT bend the mains lead when the appliance is running.
Accessories
Make sure that all the accessories are supplied with the appliance.
Elbow (see page 35)
For fixing the water-drain hose
Cover cap (x4) (see pages 32-33)
Water-supply hose (see page 34)
Either one of these hoses is supplied with the appliance.
Standard
Hose
Liquid detergent level plate
(see page 10)
NA-148VB3_ENG.indb 7
Hose with water-supply valve
(Not available for UK models)
Read Before Using - 7
2011-3-14 18:07:23
Before You Start Washing
Checking before use
For the appliance’s initial operation or after a prolonged period of non-operation, perform the following procedures:
1. Secure the water-supply hose.
2. Open the tap.
3. Connect the power.
4. Make sure that the water-drain hose is positioned towards a drain.
For more details, see page 35.
Before initial use
For the appliance’s initial operation, operate the Cotton programme with the default temperature setting, which is 40ºC,
WITHOUT any detergent or clothing to rinse out residue or moisture.
Note
There may be drops of water or condensation in the appliance due to the factory inspection prior to shipment. This is not a malfunction.
Preparing the laundry
Sorting clothing
Read clothing washing labels to help you sort them into different loads.
Sort the laundry by colour, by type of fabric, and by how soiled it is. Doing so will help you choose the correct programme and temperature for each wash.
Clothes that are not colour fast should be washed separately. Wash denim separately.
You should put bras with metal wires, tights, lace clothing and small items of clothing into a laundry net to prevent them or the appliance from getting damaged.
Caution
Do NOT wash water-repellent clothing.
There is a possibility of excessive vibration or failure during the spindrying cycle that may result in an injury, damage to the appliance or a water leak.
Treating stains
Apply stain remover to stained portions.
For dirt and solid stains, wash lightly by hand first.
Checking clothing
Check that pockets on clothing do not contain any objects that may damage the clothes or the appliance.
Tie up any loose strings on the clothing and close zippers. Turn clothing with raised fabrics and zippers inside out.
Otherwise, the clothes may be damaged.
Remove any hair, animal fur, sand, and other materials with a brush before washing.
8 - Read Before Using
NA-148VB3_ENG.indb 8 2011-3-14 18:07:24
Adding Detergent and Other Chemicals
Pull out the detergent drawer and add detergent or softener to the correct compartment. Check the packages for the appropriate recommended amounts.
Caution
Do NOT use the appliance when the detergent drawer is removed.
This may result in a water leak.
Prewashing compartment
Softener compartment
Detergent compartment
Detergent compartment
The following detergents and additives may be added to this compartment:
Detergent
Water softening agent
Stain remover
Tub cleaning detergent or bleach
If you use multiple chemicals in this compartment for washing, add them in the following order:
1. Detergent
2. Water softening agent
3. Stain remover
Detergent
Use only detergents that are recommended for fully-automated washing machines.
Please use low suds detergents.
Caution
If the instructions on the package indicate that detergent should be placed in the drum, do NOT put it into the detergent drawer.
These detergents may not flow well and remain in the detergent drawer.
1. Liquid detergent
Note
Do NOT use liquid detergent with the
Prewash function. It may flow away during the prewash.
Add liquid detergent before you start washing.
NA-148VB3_ENG.indb 9
Read Before Using - 9
2011-3-14 18:07:24
Adding Detergent and Other Chemicals
Fit the liquid detergent level plate (included with the accessories) into the detergent compartment and use it as a mark to set the amount of liquid detergent. Make sure to detach the plate before running the programme.
Note
Leaving the liquid detergent level plate in the detergent drawer while the programme is running may result in water leakage, or diminished washing and spinning performance.
Amount of Detergent
The amount of detergent you should use depends on the following factors:
-
-
How soiled the laundry is
The amount of the laundry
Water hardness
The amount of foam varies according to the amount and type of detergent, how soiled the laundry is, and the hardness and temperature of the water.
Water softening agent
If you live in a hard water area (total hardness of 1.3 mmol/L or higher), we recommend the usage of a water softening agent. For more details on water hardness, contact your local water authority.
Use of a water softening agent can help reduce the amount of detergent that is required for each wash and help prevent the formation of limescale deposits, which may damage the appliance.
For the Wool programme, use mild liquid detergent.
2. Powdered detergent
Detergent reaches the drum only when water flushes through the detergent drawer. Thus, if you forget to add detergent, run the Drain programme.
Then, add detergent and start washing again.
To prevent powdered detergent from remaining in the drawer, perform the following:
Dry the inside of the drawer with a cloth.
Make sure that the detergent is not lumpy when you add it as this may cause a blockage over time.
10 - Read Before Using
NA-148VB3_ENG.indb 10 2011-3-14 18:07:24
Adding Detergent and Other Chemicals
Softener compartment
The following additives may be added to this compartment:
Fabric softener
Laundry starch
Fabric Softener
To prevent static, add softener before you start washing. It will be automatically added in the final rinse cycle.
Dilute concentrated softeners before you add them. Add up to only 110 ml to the compartment to avoid overflowing.
Laundry starch
Simply add laundry starch to the softener compartment. It will be automatically added to the clothing as part of the final rinsing process. Make sure that you do not fill the compartment over the MAX level.
If it is hard to pour, you can dilute the starch slightly with water before adding it.
Note
After using starch, clean the detergent drawer, especially the softener cover
(see page 24-25). Then, run the Rapid
15 programme WITHOUT detergent to remove any excess starch in the drum.
Undiluted softener
Water
Rinse out the remaining softener with a splash of water or a damp cloth after washing. If it sticks to the compartment, pull out the drawer and clean it out. (See page 24-25.)
Note
Follow the directions on the softener packages for the appropriate amounts.
If too much softener is added, it may remain in the detergent drawer.
Prewashing compartment
Detergent for prewashing
Whenever you use the Cotton (Prewash) programme (
+ detergent for the prewash in this compartment.
NA-148VB3_ENG.indb 11
Read Before Using - 11
2011-3-14 18:07:25
Using the Buttons and Dials
Start/Pause
6
5 4 3
1400
0
500
800
1200
2
1000
7 8
15ºC Wash
Quick
Rapid 15
Shirts
Bedding
Sportswear
Spin
Model NA-148VB3
Off
Drain
Cotton
Cotton
Cotton-Eco
1
Colours
Easy-care
Wool
Rinse
1. Programme selection dial
Use this dial to choose the best programme for the laundry. (See pages
16.)
2. Spin speed dial
Use this dial to choose the spin speed for the programme you have selected.
The spin speeds for each of the models are as follows (5 levels):
148VB3 and 147VB3: 500, 800, 1000,
-
1200, and 1400 rpm
128VB3 and 127VB3: 500, 600, 800,
1000, and 1200 rpm
If you select a spin speed which is higher than the speed available (see page 18-19), then the max. speed is applied.
3. Extra Rinse/Child Lock button
Press this button to select the Extra
Rinse function. (See page 22.)
Press and hold this button for 5 seconds to set the child lock. The controls will be locked but the door will not be locked.
Perform the same operation to release the child lock. (See page 22.)
4. Time button
Press this button to preset the time for when the washing starts. (See page 22.)
5. Temperature button
Press this button to choose water temperatures ranging from cold (Cld) to 90ºC. (90ºC is available only with the Cotton and the Cotton (Prewash) programmes.) You can choose hotter temperatures for whites, cottons, or soiled laundry.
6. Start/Pause button
Press this button to start or pause the wash programme. The button blinks if the wash is paused.
7. Water cut off/low water pressure warning light
This light flashes when water is not supplied or insufficiently supplied. (See page 30.)
8. Blocked drain filter warning light
This light flashes when the water-drain hose or drain filter is blocked. (See page
30.)
12 - Read Before Using
NA-148VB3_ENG.indb 12 2011-3-14 18:07:25
Display on NA-148VB3
Start/Pause
9 10
9.
-
Process indicator
This indicator shows the current process of the programme. The process consists of wash , rinse , and spin .
The light goes off when the wash is finished.
10. Remaining time indicator
This indicator shows the approximate time until the washing finishes. For example, ‘200’ means 200 minutes.
Using the Buttons and Dials
Unlocking the door
The door automatically locks while in use, and the symbol is shown while the door is locked. A click will be heard when the door locks or unlocks.
Note
While the door is locked, if the appliance is switched off, or if there is a power interruption, the door will unlock after 1 or 2 minutes.
Press the Start/Pause button to unlock the door during operation.
In the following cases, the door can’t be unlocked even if operations are paused.
-
During spin-drying
When the water level is beyond a certain level
Note
If you want to unlock the door, set the programme selection dial to Off, and then select a programme (ex.
Cotton).
Caution
If you have to unlock the door mid-programme, make sure that water from the drum does not overflow onto the floor.
Water and soap suds might come out of the door and the door opening. You may need a towel to soak them up.
Read Before Using - 13
2011-3-14 18:07:26 NA-148VB3_ENG.indb 13
Washing
Setting washing
Start/Pause
7
5
1. Open the door and put the laundry into the drum.
For details about preparing and sorting the laundry, see pages 8 and 16.
Caution
-
Make sure that no laundry gets caught in the door.
-
Do NOT overload the drum.
This may cause excessive vibration or damage to the appliance.
2. Close the door.
3. Turn the programme selection dial either way to switch on the appliance and select the programme.
A wash time will be displayed.
For more details about each programme, see pages 18-19.
15°C Wash programme
This programme achieves the same cleaning strength with 15°C lowtemperature washing as 40°C programme
(except for greasy filth).
Spin programme
With the Spin programme, the operation starts from the drain process whether there is water in the drum or not. After the water drains out to a preset level, the spin process starts.
14 - Washing Instructions
1400
1200
0
500
800
1000
4
15ºC Wash
Quick
Rapid 15
Shirts
Bedding
Sportswear
Spin
Model NA-148VB3
Off
Drain
Cotton
Cotton
Cotton-Eco
3
Colours
Easy-care
Wool
Rinse
4. Select a spin speed.
If you select a spin speed which is higher than the speed available (see page 18-19), then the max. speed is applied.
5.
-
Select optional functions.
Extra Rinse function (See page 22.)
Temperature (See page 12.)
Preset timer (See page 22.)
6. Add detergent to the detergent drawer.
(See pages 9-11.)
7. Press the Start button.
The appliance starts supplying water after draining.
Note
Whenever you start washing, the process display flashes to show which function is in progress.
Before any programme is started, the appliance first drains out any water.
The buzzer will sound and “END” will flash on the display when the programme has finished, and the door will unlock immediately.
NA-148VB3_ENG.indb 14 2011-3-14 18:07:26
Caution
After a high temperature wash, be careful to not burn yourself when handling the laundry or touching the inside of the drum.
Note
If the detergent is not completely removed from the laundry by using the basic programme, use the Extra
Rinse function.
If the load is big, the laundry may stick to the inside of the drum. This is normal.
Leave the appliance door open to allow the drum to dry out after removing the laundry.
Remove the laundry and rearrange where necessary. Do not leave it in the drum too long after the programme ends, because colours may run.
Required time
Times depend on the programmes and temperature settings that have been selected.
Actual times may differ slightly from those shown.
The displayed times include the time needed for the water to fill up and to drain out, thus they vary depending on water pressure, drainage and amount of laundry.
If the laundry in the drum needs to be balanced, times will be extended.
Washing
Setting the buzzer
To turn on or turn off the buzzer which sounds when the programme has finished, follow these instructions.
Simultaneously press and hold the
Temperature and Time buttons for at least 3 seconds.
The buzzer setting will be turned off after a beep is heard.
The buzzer setting will be turned on after two beeps are heard.
Changing settings while washing
After washing has started, the programme, temperature, preset time and Extra Rinse function cannot be changed.
To change the programme, temperature, preset time, or Extra Rinse function settings, turn the appliance off and then on again.
NA-148VB3_ENG.indb 15
Washing Instructions - 15
2011-3-14 18:07:26
Selecting the Programme
+
Programme Description
Cotton
Cotton
(Prewash)
Cotton-Eco
Colours
Easy-care
Wool
Rinse
Daily washing for cotton, linen and cotton blend items (For examples,
T-shirts, underwear, towels, tablecloths)
Cotton programme with prewash process for heavily soiled laundry
Washing takes longer but consumes less energy and water than the Cotton programme.
For washing coloured cottons or coloured cotton blend items separately
Gentle washing for cotton, linen, and synthetics
Gentle washing for hand wash only wool, machine washable wool, and wool blends
Rinses washed laundry.
148VB3
128VB3
Max load
147VB3
127VB3
Max load
8 kg
8 kg
8 kg
4 kg
4 kg
2 kg
8 kg
7 kg
7 kg
7 kg
3.5 kg
3.5 kg
2 kg
7 kg
Drain
Drains water from the drum.
― ―
Spin
Spin-dries washed laundry.
Sportswear For synthetic sportswear
Bedding
For large items, for example, blankets, curtains, and bedspreads
Shirts
Rapid 15
Quick
15°C Wash
For shirts and blouses
Washes a few lightly soiled items in 15 minutes.
Washes lightly soiled items in 68 minutes.
For lightly soiled cottons, and linen blends
2 kg
2 kg
4 kg
8 kg
3 kg
3 kg
4 kg
7 kg
3 kg
3 kg
2 kg
2 kg
3.5 kg
3.5 kg
16 - Washing Instructions
NA-148VB3_ENG.indb 16 2011-3-14 18:07:28
Power and Water Consumption
+
Programme
Cotton
Cotton
(Prewash)
Cotton-Eco
Colours
Easy-care
Wool
Sportswear
Bedding
Shirts
Rapid 15
Quick
15°C Wash
Temperature
40°C
40°C
60°C
Load
(kg)
8 or 7
Power consumption
(kWh)
148VB3
128VB3
147VB3
127VB3
Water consumption
(L)
148VB3
128VB3
147VB3
127VB3
Time
(mins)
0.92
0.92
58 60 120
8 or 7
8 or 7
0.98
0.76
0.98
0.80
70
48
69
45
138
200
40°C
40°C
30°C
40°C
30°C
40°C
30°C
40°C
Cold
4 or 3.5
0.91
4 or 3.5
0.60
2
3
3
2
2
4 or 3.5
4 or 3.5
0.10
0.63
0.28
0.70
0.10
0.48
0.21
1.00
0.61
0.15
0.62
0.30
0.60
0.10
0.48
0.22
48
55
50
42
57
45
30
38
42
52
47
50
42
50
44
30
38
42
100
85
40
100
100
15
68
65
80
1) Results calculated regarding the maximum spin-dry revolution comply with EN 60456.
2) The power, water consumption, and times indicated in the table may vary depending on variations in pressures, water hardness and temperatures, room temperatures, types and amounts of laundry, voltage fluctuations, and which optional functions are used.
NA-148VB3_ENG.indb 17
Washing Instructions - 17
2011-3-14 18:07:29
Cotton-Eco
Colours
Easy-care
Wool
Rinse
Drain
Spin
Sportswear
Bedding
Shirts
Rapid 15
Quick
15°C Wash
Details of Programmes
Programme
Auto setting
Temperature
Number of rinses
Approximate time (min)
Temperature
+
Cotton
40°C
30°C
40°C
Cold
Cold
Cold
40°C
30°C
40°C
40°C
30°C
Cold
40°C
40°C
60°C
2
2
2
1
2
3
―
―
3
3
2
2
2
2
2
80
15
68
100
3
15
100
65
40
36
100
85
120
138
200
Cold
Cold
Cold - 40°C
Cold - 40°C
Cold - 60°C
Cold - 30°C
Cold - 60°C
Cold
Cold - 90°C
Cold - 90°C
Cold - 60°C
Cold - 40°C
Cold - 60°C
Cold - 40°C
Cold
18 - Washing Instructions
NA-148VB3_ENG.indb 18 2011-3-14 18:07:30
0 - 1400
0 - 800
0 - 600
*2
0 - 800
0 - 1400
0 - 1400
0 - 1400
0 - 800
0 - 600
*2
0 - 1400
―
0 - 1400
Manual setting
Spin-dry revolutions
*1
(rpm)
148VB3
147VB3
128VB3
127VB3
0 - 1400 0 - 1200
0 - 1400
0 - 1400
0 - 1200
0 - 1200
0 - 1200
0 - 800
0 - 600
0 - 1200
―
0 - 1200
0 - 1200
0 - 800
0 - 600
0 - 800
0 - 1200
0 - 1200
Preset
Timer
Extra
Rinse
―
―
―
―
Programme
+
Cotton
Cotton-Eco
Colours
Easy-care
Wool
Rinse
Drain
Spin
Sportswear
Bedding
Shirts
Rapid 15
Quick
15°C Wash
Auto setting
Temperature
Number of rinses
Approximate time (min)
Temperature
40°C
30°C
40°C
Cold
Cold
Cold
40°C
30°C
40°C
40°C
30°C
Cold
40°C
40°C
60°C
2
2
2
1
2
3
―
―
3
3
2
2
2
2
2
80
15
68
100
3
15
100
65
100
85
40
36
120
138
200
Cold
Cold
Cold - 40°C
Cold - 40°C
Cold - 60°C
Cold - 30°C
Cold - 60°C
Cold
Cold - 90°C
Cold - 90°C
Cold - 60°C
Cold - 40°C
Cold - 60°C
Cold - 40°C
Cold
0 - 1400
0 - 800
0 - 600
*2
0 - 800
0 - 1400
0 - 1400
0 - 1400
0 - 800
0 - 600
*2
0 - 1400
―
0 - 1400
Manual setting
Spin-dry revolutions
(rpm)
*1
148VB3
147VB3
128VB3
127VB3
0 - 1400 0 - 1200
0 - 1400
0 - 1400
0 - 1200
0 - 1200
0 - 1200
0 - 800
0 - 600
0 - 1200
―
0 - 1200
0 - 1200
0 - 800
0 - 600
0 - 800
0 - 1200
0 - 1200
Preset
Timer
―
―
―
―
Extra
Rinse
Details of Programmes
* 1 If you select a spin speed which is higher than the speed available, then the max. speed is applied.
* 2 If you select a spin speed of
800 rpm or higher with the
Wool or Shirt programme,
600 rpm is applied.
Washing Instructions - 19
NA-148VB3_ENG.indb 19 2011-3-14 18:07:31
Washing Delicates
Wool programme
The drum spins gently in the Wool programme.
For details about washing instructions, see pages 14-15.
Wool laundry loads
Wool programme: 2 kg or less
Approximate weights
Wool sweater: 400 g
Hanging the laundry
Hang out white or light-coloured wool and nylon items away from direct heat or sunlight.
After washing, lay out wool and nylon clothes, and return them to their normal shape before hanging in the shade. This saves on ironing too.
Hang wool items without folds or creases, or spread them out to dry.
Tips for washing delicates
Putting laundry in the drum
Pile them one on top of each other.
Detergents
For wool items, use a mild liquid detergent. Other detergents may damage the clothes.
With Wool programme, you may need to use the Extra Rinse function to remove excess detergent from the laundry. (See page 22.)
Use hangers for shirts, blouses and trousers.
You may wrap a towel around the hanger to approximate the clothing’s shoulder width so that it will retain its shape as it dries.
If clothing shrinks in the wash
Spread the item out to its original size on an ironing board. Use dress pins to hold the size and shape. Then, use an iron to steam it and leave it to dry.
20 - Washing Instructions
NA-148VB3_ENG.indb 20 2011-3-14 18:07:32
Washing Blankets and Bedspreads
Bedding programme
For details about washing instructions, see pages 14-15.
Make sure that the label of each item to be washed shows either the wash or handwash symbol ( , ).
Wash only one blanket at a time.
Washable
100% synthetic fibre blankets – up to
3 kg
100% synthetic fibre futons and 100% cotton blankets – up to 1.5 kg (single bed size)
Sheets
Bedspreads
100% synthetic fibre undersheets
Non-washable
100% wool blankets
Long-piled blankets
Electric blankets (including cover)
Putting bedding into the drum
1. Fold down blankets or bedspreads into a quarter of their original size.
2. Put the blanket or bedspread to the drum.
Fold it while putting it into the drum.
Both ends of blanket should be directed inward the drum
Caution
Do NOT roll blankets or bedspreads into balls, nor haphazardly fold them.
This may cause excessive vibration and damage the laundry or the appliance.
Note
Avoid using blanket nets. They prevent the laundry from spinning properly.
NA-148VB3_ENG.indb 21
Washing Instructions - 21
2011-3-14 18:07:32
Optional Functions
Extra Rinse function
Note
Extra Rinse functions cannot be used with certain programmes. (See pages
18-19.)
If you select it when it is unavailable, an error alarm will sound.
Press the Extra Rinse button select the function.
The button will flash.
Function
Extra
Rinse
Description
Rinse your laundry more thoroughly with an extra rinsing process.
to
Child lock
When the child lock is activated, the controls are locked (the door will not be locked). This prevents children from changing the wash settings or playing with the appliance.
Activating/deactivating child lock
1. Switch on the appliance.
2. Press and hold the Extra Rinse button for at least 5 seconds.
The symbol light up to show that the child lock is activated.
3. To deactivate, hold down the Extra
Rinse button again for 5 seconds
(please ignore three beeps heard, keep Extra Rinse button pressed until it deactivates).
Preset timer
You can use the timer to preset the wash to start anywhere from 1 to 24 hours later.
Note
Do NOT use detergent which does not dissolve thoroughly with the preset function, because the detergent might cake up before the wash starts and not flow out.
Setting a preset time
Set a preset time after you have selected the programmed and optional functions
(see page 14).
1. Continuously press the Time button until the desired preset time is displayed.
2. Press the Temperature button or the
Extra Rinse button to set the preset time.
The countdown has not started.
-
-
To cancel the preset time
Press the Time button.
To change the preset time
Press the Time button, then redo the setting from step 1.
3. Press the Start/Pause button to activate the countdown.
-
To cancel the preset time
Turn the programme selection dial to
‘Off’. (All settings will be cancelled.)
To change the preset time
Turn the programme selection dial to
‘Off’. After reselecting the programme and optional functions, redo the setting from step 1.
22 - Washing Instructions
NA-148VB3_ENG.indb 22 2011-3-14 18:07:33
Cleaning the outside of the appliance
Clean the outside of the appliance with a soft cloth and mild detergent, for example, kitchen detergent, and soapy water.
Warning
-
Do NOT splash water over the appliance.
-
Do NOT use cream cleansers, thinners, nor products containing alcohol or paraffin oil.
Cleaning the door seal and window
After each wash, perform the following:
Remove any objects from the door seal.
Wipe the window and seal to remove lint and stains.
If lint builds up, it can cause leaks.
Cleaning the drain filter
We recommend cleaning the drain filter every 1 month. Filter will have lint buildup, reduces the water from the shower.
1. Switch off and unplug the appliance.
2. Open and remove the drain filter cover. Place a container to receive the drain water in front of the drain filter.
Stopper
Maintenance
3. Carefully turn the drain filter anticlockwise to unscrew it.
Water may drain out. This is normal.
4. Then, remove the drain filter.
5. Remove any lint and debris.
6. Replace the drain filter and drain filter cover.
Reinsert the drain filter. Then turn it clockwise until it touches the stopper.
Caution
BE CAREFUL when draining hot water.
Drain filter
NA-148VB3_ENG.indb 23
Maintenance - 23
2011-3-14 18:07:33
Maintenance
Cleaning the drum
If you keep using cold water in the appliance, bacteria may build up inside the drum and give off an odour. You can avoid this by running the 90°C Cotton programme once a month. (If you use a scale remover, follow the manufacturer’s instructions.)
Caution
Viruses and bacteria are not killed in water temperature of 40°C.
Pathogens can spread via the commingling of clothes and thus transmit diseases.
Pathogens die at 60°C or higher.
However, using water temperatures up to 90°C is unnecessary.
Note
Do NOT put laundry nor laundry detergent into the appliance while it is being cleaned.
If you use tub cleaning detergent or bleach, put it into the detergent drawer before starting the wash. The appropriate amount to be used is about 30 ml. (See page 9.)
Cleaning the detergent drawer
Detergent residue soon builds up if the detergent drawer is not cleaned regularly.
Detergent build up may develop mould.
Depending upon which type of softener cover the appliance is equipped with, follow the corresponding instructions.
A Type B Type
Instructions for the A type
1. Pull out the detergent drawer.
2. Remove the detergent drawer by pulling it out while pressing down on the middle of the softener cover.
Softener cover
24 - Maintenance
NA-148VB3_ENG.indb 24 2011-3-14 18:07:33
3. Pull your finger on the tab near the front of the softener cover then pull it up to remove it from the detergent drawer.
Maintenance
3. Move the detergent drawer up and down while pulling it out to remove it.
Softener cover
4. Wash out the old detergent with water.
Use a cloth to wipe the water from the appliance.
5. Replace the softener cover.
6. Reinsert the detergent drawer while pressing down on the middle of the softener cover.
Instructions for the B type
1. Pull the detergent drawer until it will not move anymore.
4. Pull your finger on the tab near the front of the softener cover then pull it up to remove it from the detergent drawer.
5. Wash out the old detergent with water.
Use a cloth to wipe the water from the appliance.
6. Replace the softener cover.
7. Reverse the procedures to reinsert the detergent drawer.
2. Then jiggle it until it is fully extended.
NA-148VB3_ENG.indb 25
Maintenance - 25
2011-3-14 18:07:34
Maintenance
Cleaning the water-supply filter
Clean the filter if water is not supplied properly.
1. Turn the tap off.
2. Switch on the appliance.
3. Select the Cotton programme, and then press the Start button. Drainage begins when the appliance is started.
4. After 2 minutes, switch off the appliance. Water has been drained
out of the water-supply hose.
5. Disconnect the water-supply hose from the appliance.
6. Clean the filter, which is on the rear of the appliance.
Use a small brush, for example, a toothbrush.
7. If the unit is supplied with the hose fitted with a water-supply valve turn off the tap supplying the appliance, disconnect the hose from the tap, and then clean the filter on hose in the same way.
8. Reconnect the water-supply hose.
Tighten the plastic joint firmly.
9. Turn on the tap, then check for leaks.
Preventing a frozen water-supply hose
If the appliance is delivered in freezing weather conditions, after setting up, leave it at room temperature for 24 hours before using. This will ensure that the water-supply hose does not get clogged up with ice.
If your water-supply hose freezes, perform the following procedures:
1. Wrap warm towels around the joints of the water-supply hose.
Joints Tap
Water-supply hose
2. Add 2 to 3 litres of warm water to the drum.
about
50°C
3. Run the Drain programme. (See page
14.)
26 - Maintenance
NA-148VB3_ENG.indb 26 2011-3-14 18:07:35
Fault Checklist
Problem
Buttons do not work.
Door does not open.
Unusual odour
No water going into the appliance.
There is only a small amount of water.
Water builds up during the washing.
Cause
The programme, temperature, preset time, or Extra Rinse function settings cannot be changed while washing is in progress.
Child lock may be activated. (See page 22.)
Door lock may be activated. (See page 13.)
The water temperature or level may be too high. (See page 13.)
Rubber parts may give off a smell when you start using the appliance, but the smell will go away over time.
You can wash the drum by running the 90°C programme.
(See page 24.)
The water tap might be turned off.
The water-supply hose may be frozen. (See page 26.)
The water supply may be disrupted.
The water-supply filter may be clogged. (See page 26.)
If you have paused the washing and then restart it, the appliance may drain out some water.
Do NOT pour water in through the door.
This is normal; water is automatically supplied if the amount of water has decreased. For heavy loads, the water may fill up repeatedly.
Before rinsing, the appliance spins to drain out remaining water. The water will fill up after that.
No water flows into the appliance during the rinsing process.
Rinsing begins before the spin process finishes.
During spin-dry, the drum stops and rotates several times.
Foam and water remain in the door or door seal.
Spin cycle repeatedly starts and stops.
The laundry is still wet after the spinning finishes.
After washing, excess foam may remain, so the water is drained out and refilled to wash it away. This feature is called foam detection.
This is normal; the appliance has detected an unbalanced load and is trying to correct it.
Although some foam and water might remain depending upon the state of the laundry and the amount of detergent used, the performance of the rinse cycle is unaffected.
This is normal; intermittent spinning of the tub helps the spin process to operate quietly.
The laundry may be too light. If so, add one or two bath towels.
An unbalanced load is not corrected automatically.
If the laundry is too light, add one or two bath towels.
If the laundry gets tangled up, untangle it.
Troubleshooting - 27
NA-148VB3_ENG.indb 27 2011-3-14 18:07:35
Fault Checklist
Problem Cause
There is no foam or hardly any foam.
The amount of foam varies, depending on the temperature, level and softness of the water.
You may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
You may not be using enough detergent.
You may be using a reduced-foam type of detergent.
Heavily soiled laundry and larger loads of laundry may reduce the amount of foam.
There is a lot of foam.
The amount of foam varies, depending on the temperature, level and softness of the water.
You may have used too much detergent.
Fabric softener overflows.
The type of detergent you are using may cause excess foam.
The softener may have exceeded the MAX level for the detergent drawer. (See page 11.)
You may have spilt the liquid by closing the detergent drawer too strongly.
After the wash has finished, powdered detergent residue remains.
You may have put powdered detergent directly into the drum; you must put it in the detergent drawer.
28 - Troubleshooting
NA-148VB3_ENG.indb 28 2011-3-14 18:07:35
Fault Checklist
Problem remaining time changes.
There is an unusual noise or vibration.
There is noise when the water drains out.
There are noises during washing or rinsing.
The electricity supply cuts out while the appliance is on.
A circuit breaker trips the electricity supply.
The water supply is disrupted.
The display is not clear.
-
-
Cause
The remaining time is estimated and corrected continually.
Thus, the time displayed may change.
There may be metal items in the drum.
The anchor bolts may not have been removed. (See page
32.)
The appliance may be on a sloping or unstable surface.
If none of the above is the cause, contact your local
Customer Communication Centre.
This is normal; it is noise created by the operation of the drain pump.
This is normal; They are noises from the pump that circulates washing or rinsing water.
The appliance will stop, and will not start by itself when the power comes back on. You have to select a programme and start it again.
The appliance stops, and will not start by itself when you reset the breaker. You have to find out what caused the breaker to trip and solve it. Then, reset the breaker to turn the electricity supply back on, and switch on the appliance again.
When the water is supplied again, it may be impure at first.
You have to disconnect the water-supply hose and drain away the impure water through the tap. Make sure that the water-supply hose has been reconnected before using the appliance.
The appliance may be in a brightly lit or sunlit area.
NA-148VB3_ENG.indb 29
Troubleshooting - 29
2011-3-14 18:07:35
Error Display
Error What to do
Make sure that the door is shut properly.
Door is open
Unable to supply water
Unable to drain
Overflow
Supply water is cut-off or water pressure is low.
Check for any of following problems.
The tap is closed.
The water pipe or hose is frozen.
The water supply has been disrupted.
The water-supply filter is clogged. (See page 26.)
If the red mark appears in the hose with water-supply valve, it have been stop the water supply.
You should replace with a new hose.
Hose with water-supply valve
Check the drain hose for any of following problems.
It clogs up.
Its tip is immersed in water.
It extends with joints.
The water is frozen.
Clean the drain filter if it clogs up. (See page 23.)
Check for any of following problems.
The water-supply valve has failed.
The water-supply valve triac has failed.
Switch off and unplug the appliance. Shut off the tap and contact your local Customer Communication Centre.
If the light flashes, check for any of following problems.
The tap is closed.
The supply water is cut-off.
The supply water pressure is low.
The water-supply hose is clogged or twisted.
The water-supply filter is clogged. (See page 26.)
If the light flashes, check for any of following problems.
The drain filter is clogged. (See page 23.)
The water-drain hose is clogged or twisted.
Drain filter is clogged.
To restart the operation after an error message appears, set the programme selection dial to
Off, and then select a programme and start the operation.
30 - Troubleshooting
NA-148VB3_ENG.indb 30 2011-3-14 18:07:36
Carrying the appliance
The appliance must be carried by 2 or more people.
Start by tilting the appliance backwards.
The appliance should be carried by two people, one on each side holding it from the bottom.
The right place for the appliance
Make sure that there is enough space for the appliance and that openings on the base are not obstructed by a carpet.
186
454
597
Choosing the Right Location
Caution
-
Install the appliance on a flat, stable surface to avoid excessive vibration and noise.
-
Do NOT install the appliance on a carpet or similar type of grounds.
-
Do NOT install the appliance in direct sunlight or in a place where temperatures reach freezing.
-
Do NOT let metallic portions of the appliance come into contact with metal sinks or other appliances.
Installing a built-in washing machine
You need a space at least 60 cm wide.
At least 2 mm of clearance on the sides, and 5 mm of clearance above and behind the appliance are required.
The counter above the appliance must be firmly fixed to the adjoining cupboards.
Caution
Do NOT install the appliance as a built-in washing machine with the cover panel removed.
Cover panel
Dimension in millimetres
*for NA-127VB3 and NA-147VB3
NA-148VB3_ENG.indb 31
Installation Instructions - 31
2011-3-14 18:07:40
Moving and Installing
Removing the anchor bolts
Four anchor bolts keep the interior of the appliance in place while the appliance is being moved. Remove them before installation, using a spanner. Follow the following instructions.
Note
The anchor bolts must be removed before the appliance is operated.
They may cause excessive vibration.
3. Push each cover cap (included with the accessories) over each bolt hole.
1. Use the spanner to loosen the four bolts.
Rotate the bolts anti-clockwise.
2. Pull the bolts out horizontally.
Note
Make sure that you store the anchor bolts, because they are used when transporting the appliance. If the appliance is passed on to another person, make sure to give the anchor bolts to that person.
Moving the appliance
Note
Make sure to install the anchor bolts in the appliance.
Before you move the appliance
Shut the tap and run the appliance to drain the water. Drain any remaining water from the drain filter. (See page
23.)
Depressurize the water-supply hose and remove it.
Disconnect the power cable.
Install the anchor bolts. (See page 33.)
32 - Installation Instructions
NA-148VB3_ENG.indb 32 2011-3-14 18:07:41
Installing the anchor bolts
1. Remove the four cover caps.
Moving and Installing
Levelling the appliance
2. Insert the anchor bolts into each anchor bolt hole.
3. Tighten each bolt with the spanner.
Plastic nut
Foot
1. On each leg, loosen the plastic nut by turning it clockwise.
2. Adjust each foot by turning it clockwise or anticlockwise.
3. Use a spirit level to make sure that the appliance is properly levelled.
4. Tighten each plastic nut by turning it anticlockwise.
Caution
-
Make sure that all plastic nuts are tightened securely and the feet are still bolted to the appliance.
If they are unbolted, the appliance will move around.
-
Do NOT put cardboard, wood or similar materials under the appliance to compensate for unevenness.
-
Be careful not to destabilize the appliance when cleaning the floor.
NA-148VB3_ENG.indb 33
Installation Instructions - 33
2011-3-14 18:07:42
Connecting Hoses and Power Supply
Follow the instructions in this section to prevent water leaks. If you are unsure, ask a service agent to connect the hoses.
Hoses and cable lengths
Left side connections Right side connections
~ 95 cm
~ 145 cm
~ 140 cm
~ 95 cm
~ 90 cm
~ 100 cm*
~ 145 cm
~ 155 cm*
Water-supply hose
* for NA-147VB3, NA-127VB3 models
Caution
-
Do NOT connect the water-supply hose to a combination tap.
-
Do NOT twist, squash, modify, or cut the hose.
2. Attach the other end of the hose to the tap and tighten it the same way.
Standard hose
3/4”
Make sure the filter is inside the hose.
min. 10 mm
Optimum mains water pressure is 0.1 -
1.0 MPa. If the water pressure exceeds this value, install a pressure reducing valve.
Water-flow from the tap should be more than 5 L/min.
Hose with water-supply valve
3/4” min. 10 mm
Connecting the water-supply hose
1. Attach one end of the hose to the water inlet on the back of the appliance and tighten the joint by hand.
3. Open the tap slowly and make sure that there are no leaks around the joints.
The joints are subject to water pressure.
34 - Installation Instructions
NA-148VB3_ENG.indb 34 2011-3-14 18:07:43
Connecting Hoses and Power Supply
Leak-proof System
The appliance is installed with the system that is designed to prevent water leaks. The system includes the following components.
1) Aquastop system
If a water leak is detected in the water inlet hose, the system stops supplying water automatically. This system is only functions with hoses with water supply valves.
2) Overflow detection
If water in the appliance increases to a certain level, this function stops the water supply and activates the drain pump.
Water-drain hose
Caution
-
Do NOT twist, pull out, or bend the drain hose.
-
Do NOT use joints to extend the water-drain hose.
Draining to a sink or wash-basin
Caution
-
The water-drain hose must be removed from the hook on the rear side of the appliance before the appliance is operated.
If the water-drain hose is close to the appliance, the hose may come in contact with the appliance and generate noise during the spin cycle because of vibrations.
-
Secure the water-drain hose so that it will not come out of the basin.
-
Do NOT block the basin, where the drain outlet is. Make sure that drainage into the drain is sufficient.
-
Do NOT let the tip of the water- drain hose dip into the drained water.
This can cause water to flow back into the appliance.
Draining to a drain hose
Elbow
NA-148VB3_ENG.indb 35
Installation Instructions - 35
2011-3-14 18:07:44
Connecting Hoses and Power Supply
Connecting to the power supply
Name plate
Caution
-
The name plate indicates the rated power that the appliance needs.
Make sure that the power supply specifications in your residence match the information mentioned here. The information on the power supply specifications are also mentioned on page 38 of these instructions.
-
If the product is not correctly grounded, the user will be liable for any damage incurred.
36 - Installation Instructions
NA-148VB3_ENG.indb 36 2011-3-14 18:07:44
Installation checklist
3
Checking After Installation
7 1
4
5 6
1) Anchor bolts
Have you removed them and attached the cover caps properly?
2) Location
Is the appliance on a flat, stable surface?
Does it run without vibrating?
3) Water-supply hose
Is it free from leaks?
Is the water supply normal?
4) Water-drain hose
Is it free from leaks?
Does it drain normally?
2
5 6 5 6
5) Adjustable feet
Are they bolted securely to the appliance?
6) Stand cushions
Are they standing flat?
If the appliance is not level, there may be abnormal sounds when water is drained out.
7) Power supply
Is the household dedicated mains socket, fully rated at AC 220 V to 240 V?
NA-148VB3_ENG.indb 37
Installation Instructions - 37
2011-3-14 18:07:45
Specifications
Rated voltage
Rated frequency
Maximum energy rated power input
Heating energy rated power input
Product weight
Maximum mass of dry cloth
Height
Product dimensions
Width
Depth
Water consumption
Pressure of tap water
NA - 148VB3
NA - 128VB3
220 - 240 V
NA - 147VB3
NA - 127VB3
50 Hz
2200 W
2000 W
77 kg
8 kg
73 kg
7 kg
845 mm
597 mm
602 mm 547 mm
Refer to “Power and Water Consumption”.
0.1 - 1 MPa
Customer Communications Centre
Fridge-Freezer and Washing Machine
Please note, we are unable to assist with calls regarding Audio Visual and other Home
Appliance products on this line.
Monday to Thursday 9:00 - 20:00
Friday 9:30 - 20:00
Saturday to Sunday 10:00 - 16:00
0844 844 3896
Monday to Thursday 9:00 - 17:30
Friday
(For Republic of Ireland)
9:30 - 17:30
If calling from the Republic of Ireland, please call
01-630-9799
38 - Installation Instructions
NA-148VB3_ENG.indb 38 2011-3-14 18:07:46
NA-148VB3_ENG.indb 39 2011-3-14 18:07:46
Web Site: http://panasonic.net
Pursuant to the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
© Panasonic Corporation 2011
Backcover.indd 40
Printed in Turkey
February 2011
W9901-7TM10
2011-3-17 9:43:51
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project