Replacement Apex RRCU200 remote control Operating manual

The Replacement Apex RRCU200 is a universal remote control designed to control most functions of popular DTV converter boxes, DVD players, TVs, and cable/satellite set top boxes. It includes setup instructions for various popular brands, and can control volume and mute functions for different devices. The remote can also be used to control certain DVD functions while in TV mode.

PDF
Document
Replacement Apex RRCU200 Remote Control Operating Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Controls most DTV converter boxes, standard DVD players, TVs and cable/satellite set top boxes

  • Universal remote for Apex Digital® stand-alone DVD players, televisions and DTV converter boxes

  • Controls volume and mute functions for different devices

  • Provides control for certain DVD functions while in TV mode

  • Child lock mode available on certain Apex Digital® TV models

  • Volume macro function available on certain Apex Digital® TV models

  • Easy setup process

  • Extensive code list for various brands

  • Requires 2 AAA batteries (not included)

  • One-year warranty

Frequently asked questions

Turn on your TV and press the TV and SETUP buttons together on the remote until the TV button light illuminates red. Point the remote towards the television and enter a 3-digit code from the TV brand list. The television should turn off. If it doesn't, enter another 3-digit code from the TV brand list, if available and repeat. When the television turns off, press the SETUP button to finalize. The red TV button light will flash 3 times then go out.

While the player is on, press the DVD and SETUP buttons together on the remote until the DVD button light illuminates red. Point the remote towards the DVD player, enter a 3-digit code from the DVD brand list. The player should turn off. If it doesn't, enter another 3-digit code from the DVD brand list, if available and repeat. When the player turns off, press the SETUP button to finalize. The red DVD button light will flash 3 times then go out.

Child lock mode is available on certain Apex Digital TV models and it prevents the remote from transmitting any IR signals in the TV mode. To enter Child Lock Mode, press and hold the F and MUTE buttons together on the remote for about 2 seconds. To exit Child Lock Mode, repeat the same steps.

Preparing document for printing…
0%