Getting started with
Logitech® Wireless Speaker for iPad®
Getting started with
Logitech® Wireless Speaker for iPad®
1
1
2
1. Power/battery-life indicator LED
2. Wireless connection indicator LED
3. 3.5 mm auxiliary input
4. Power input
5. Volume up
6. Power on/off
7. Volume down
3
4
2
6
www.logitech.com
Fully charging the battery can take up to six hours.
Your speaker can be used while charging.
5 6 7
© 2011 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Microsoft, Windows Vista, Windows, and the Windows logo are trademarks of the Microsoft group of companies. Apple, iPod, iPhone, Mac, and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
620-003518.002
Connecting your Wireless
Speaker with your iPad® or iPhone®
To connect with your iPad or iPhone (or one other Bluetooth® device), please follow the instructions below:
1. Power on your Wireless Speaker.
2. Simultaneously hold down the Volume
Up and Volume Down buttons on the back of your Wireless Speaker for 10 seconds. The green wireless connection
LED will begin blinking quickly.
3. Power on your iPad or iPhone.
4. Select the Settings icon.
5. Select the General icon.
6. Select the Bluetooth menu, and ensure that Bluetooth is turned on.
7. Find the Logitech Wireless Speaker and select it.
8. Confirm that you want to connect the
Wireless Speaker with your iPad or iPhone by selecting the Pair button.
A confirmation window appears after you have selected the Wireless
Speaker. There may be a slight delay so please wait.
9. Your Wireless Speaker is now connected with your iPad or iPhone.
Your Wireless Speaker will always connect to the last connected device. So the next time you turn on your speaker, it will connect to your iPad or iPhone if either unit was the last connected device.
Useful notes and tips
You can only connect your Wireless Speaker with one device at a time.
If the wireless connection is lost between your iPad or iPhone and your speaker, you will need to follow steps 4 through 7 to reestablish the wireless connection.
When your Wireless Speaker is connected to your iPad or iPhone, you must adjust the volume through the controls on the
Wireless Speaker.
The Logitech Wireless Speaker will pair with two wireless devices. If you decide to pair an additional wireless device to your
Wireless Speaker, the previous pairing will be lost.
Battery-life indicators
Discharging
Solid green
Solid orange
Solid red
No light
50–100% battery life
10–<50% battery life
<10% battery life
Speaker is off or battery needs recharging
Charging
Solid green
Pulsing green
Pulsing orange
Pulsing red
100% charged
50–<100% charged
10–<50% charged
<10% charged
Note: The battery is removable for disposal/recycling only. Please see www.logitech.
com/support for more information.
If you quickly press the power button, your speaker will turn off but will continue to charge its battery. If you hold the power button down for 10 seconds, your speaker will turn off and go into a power-conservation mode, which will stop its battery from charging.
Note: If your speaker is charging in the “off” state, it will automatically turn completely off after its battery is fully charged.
Wireless connection indicators
Solid green
Flashing green
No light
Connection made between iPad and speaker
Seeking a connection between iPad and speaker. Green light will flash for 5 minutes before going out.
iPad or speaker is out of wireless range for more than 5 minutes or speaker is powered off
Note: Wireless connection indicators disabled when using 3.5 auxiliary input.
Help with Setup
Something not sound right? No sound at all?
• Move the speaker closer to your iPad.
• Adjust the volume to an audible setting in your audio source and speaker.
• If another audio device was plugged directly into the speaker, make sure the 3.5 mm cable is unplugged.
• Quit your music application and then restart it.
Visit www.logitech.com for more troubleshooting tips.
www.logitech.com/support
United States +1 646-454-3200
What do you think?
Please take a minute to tell us. Thank you for purchasing our product.
www.logitech.com/ithink
