advertisement
G l o s s a r y
Head Unit Section
AUI (Auditory User Interface)
Details on page 5.
AUX-In Connectivity
Details on page 8.
BBE® digital
BBE® adds a longer delay time to the lower frequencies and slightly “boosts” the high range which tends to become attenuated, so that it recovers its natural articulation. The result: greater live presence with the brilliance and clarity of the original sound.
CD-R/RW Compatibility
All Pioneer CD head units can play back CD-R/RW discs, allowing the user to enjoy favorite compilations in-car.
Detachable Face Security™ (DFS)
A theft-deterrent system invented by Pioneer which revolutionized head unit security. With DFS, you simply lift off the front panel (face) of the unit, slip it into a protective case and take it with you. The unit’s sensitive electronics remain protected in the dash; all that remains visible from the dash is a black panel that won’t attract thieves.
Digital Signal Processor
DSP uses digital technology to correct a vehicle’s interior acoustics. The system also offers various sound fields to recreate different listening environments in your car (Studio, Jazz, Club, etc.).
Easy Equalizer
Details on page 11.
Full-color OEL (Organic EL) Display
Details on page 5.
High-Voltage Pre-out
Pioneer’s High-Voltage Pre-out maximizes signal strength to your amp. The benefits are superior dynamics, crisper highs, more full-bodied bass, and a higher signal-to-noise ratio for minimal noise interference attributable to connections.
IP-Bus Control
The IP-Bus connections on Pioneer head units allow the user to connect optional source units such as a TV tuner, DVD player, Multi-CD player or even an iPod
®
and create a true mobile multimedia center.
iPod® Direct Connection
Details on page 7.
IP-Bus USB Adapter (CD-UB100)
Details on page 8.
iTunes® AAC (Advanced Audio Coding)
Advanced Audio Coding (AAC) is a wideband audio codec that dramatically reduces the amount of data needed to convey high-quality digital audio.
MOSFET 50 W × 4
Details on page 11.
MP3
Popular compression format that allows large amounts of audio files to be stored onto one
CD-R/RW disc. Pioneer players come equipped with buffering capabilities, so they are all able to handle data rates from 16 kbps and VBR (Variable
Bit Rate) recording.
OEL (Organic EL) Display
Pioneer OEL (Organic EL) display delivers highcontrast, moving 3D images, even in sunlight. Its smart functionality lets the user control and confirm play source operating information and provides plenty of space for text, for lists of tracks, discs or other data from MDs or CDs. Pioneer’s latest OEL display is also larger, using a total of 256 × 80 pixels to offer even more entertainment features.
• Pure Blue OEL
Details on page 6.
• Segmented OEL
Details on page 7.
RCA Output or RCA Pre-out
The standard connection system to carry sound from a head unit to an amplifier or equalizer.
RCA pre-outs provide easy output for connection to an outboard amplifier.
Amplifier Section
Bass Boost
Bass boost offers a choice among bass levels, spanning the range from 0 dB to 12 dB in 2 dB increments, for each speaker (including subwoofer) of a system. This provides more control over the overall balance of sound, to suit listener taste and style of music.
Class-FD ICEpower Amplifiers
Details on page 16.
High Pass Filter
Low-range sound is filtered off according to user-set cut-off frequency. Mid- and high-range sounds are transferred to the speaker.
Low Pass Filter
Mid- and high-range sounds are filtered off according to user-set cut-off frequency. Low-range sound is transferred to the woofer.
RCA Input
RCA input can be connected with head unit featuring RCA output for preamp signal.
RCA Input/Output
RCA input can be connected with a head unit featuring RCA output for preamp signal. RCA output can be connected with additional amplifiers for a multi-amp system configuration.
Speaker Level Inputs
This allows a Pioneer amplifier to be connected to an
OEM radio without requiring costly add-on adapters.
The added flexibility allows your Pioneer amplifier to be a part of your system as it grows.
Subwoofer Control
A function built into the head unit allows adjustment of subwoofer frequency.
Supertuner® IIID+/Supertuner® IIID/
Supertuner® III™/Supertuner®
Beyond the minimal sound interference and resistance to Three Signal Intermodulation (TSI) of Pioneer’s Supertuner® line, Supertuner® IIID advanced analog and digital blocks assure sound superiority and smoothly extend reception.
Supertuner® IIID+ features FM Multi-path Canceller for improved stereo separation; AM Noise Canceller with Hi-Speed Gate control counteracting external noise; and Automatic Reception Control to strengthen weak signals.
USB Direct Connection
Details on page 6.
WMA (Windows Media™ Audio)
WMA is a music compression format developed by Microsoft Corporation. It uses the latest coding technologies to compress an original audio track, minimizing file sizes while maintaining good audio quality, even at rates as low as 64 kbps.
Subwoofer & Speaker Section
Air Suspension System
Details on pages 21 and 24.
IMPP (Injection-Molded Polypropylene)
Composite Cone
Pioneer uses a special injection molding process rather than “pressing” polypropylene speaker cones. This process ensures uniform cone thickness for superior linearity and clarity. What’s more,
Pioneer’s “Composite” technology guarantees the perfect mix of polypropylene and carbon fiber, graphite and other materials to optimize the speaker cone for its specific application (woofers, midranges, tweeters, etc.).
KEVLAR® Brand Fiber
Characterized by lightness, strength, and low resonance to powerful input, KEVLAR® Brand Fiber is excellent for speaker diaphragms, helping to produce more detailed, accurate sound.
VCCS (Voice Coil Cooling System)
Typically, the longer and louder you play your subwoofer, the hotter it gets. This changes its electrical and mechanical characteristics and adversely affects sound quality. Pioneer’s Voice Coil
Cooling System (VCCS) draws heat away from the inside of the subwoofer, reducing temperatures by up to 30˚C. In the simplest terms, it keeps your sound crisp and your subwoofer from losing its cool.
PRINTED ON
100% RECYCLED
PAPER.
Printed with soy ink on
100% recycled paper.
Pioneer Environmental Mark
Symbol of environmental preservation activities
You already know that Pioneer is committed to improving the quality of car audio environments. But Pioneer is also making a commitment to the quality of the earth’s environment. For one thing, the brochure you’re holding is printed on recycled paper. In addition, Pioneer
Corporation has begun to pack its car audio products in
Environmentally Friendly Pulp Mold Packaging— a new material made from paper pulp and recycled paper, newspapers and magazines. This is in direct re s p o ns e to i n c re a si n g ev i d e n c e t h a t s t y rofo a m packaging harms the environment. The switch signals a worldwide move away from styrofoam by the Pioneer
Corporation and underscores Pioneer’s commitment to help safeguard our planet.
For more information, call or write to:
Visit us on the World Wide Web at
http://pioneer.jp
Published by Pioneer Corporation.
Copyright 2007 by Pioneer Corporation. All rights reserved.
Specifications and design may be subject to modification without notice.
Product colors and illumination may differ in photographs from actual appearance, due to effects of printing and photography.
Code No.: 8101G Name: 07 CE AUDIO GENERAL (E-Red)
ADKI 03-07 Printed in Japan.
P R O C E E D W I T H P A S S I O N
Where Pioneer leads, passion follows. So free your soul. Ride your music beyond every journey’s limit.
Boldly go where your ears have never taken you before, straight toward the sound of your dreams.
Surround yourself with pure, deep, satisfying sensation in the comfort of your car. The future of audio enlightenment starts right there.
2
Make More of Your System iPod® and USB Connection plus AUX-In Connection
Pioneer single-CD head units let you extend entertainment with connection and control of an iPod® or other portable digital player.
The DEH-P7950UB even makes this connection direct via USB terminal. Otherwise, use an IP-Bus USB adapter CD-UB100 to connect and control a portable digital player or USB memory device. Our head units for 2007 also feature front or rear built-in AUX-in terminals for more complete connection to external digital audio players and devices.
Composite image shown in iPod® display.
DEH-P7950UB
Enlighten Your Eyes
Dot-Matrix OEL (Organic EL) Display
See how brilliant up to 65 536 colors can look on a Full-Color OEL capable of displaying 3D animated graphics. Pure Blue OEL puts a cool perspective on display with extraordinary contrast and brightness. Segmented OEL shows a two-line character readout and is easy to view all around in every situation.
Digital 1 (DEH-P8850MP) Graphic (DEH-P8850MP) Movie “Space Elevator” (DEH-P8850MP)
Thrill To Premium Performance
ODR (Optical Digital Reference) Systems
New Pioneer ODR (Optical Digital Reference) technology keep pure audio fidelity and sound staging remarkably faithful to original sources. The sound master clock circuitry of the RS-D7RII keeps process digital signals for linear sound reproduction of pristine clarity. A higher standard of sound quality is also realized by the RS-P90, with its three SHARC digital signal processors handling signal input with 32-bit precision.
Peerless Digital Power
Class-D and Class-FD ICEpower Amplifiers
A Pioneer Class-D amplifier consumes just 2/3 of the power that a conventional amplifier uses to supply system speakers with stable, distortion-free, high-power output.
This is remarkable for such-compact amplifiers. Class-FD amplifiers extend the standard of excellence, combining
Class-D circuitry and ICEpower digital technology, delivering truer fidelity with crisp, airy mids and highs.
Sound Supreme
PRS (Premier Reference Series) Speakers
With a wide-open sensation and silky sonic range, Pioneer made winners of its high-impact
PRS speakers at IASCA (International Auto
Sound Challenge Association) and other competitions. But the more lasting reward of PRS speakers is how they realize supreme standards of Pioneer’s “Open & Smooth” sound ideal. The awesome response,
Pioneer PRS speakers have earned critical acclaim from Europe, the United States, and more recently, Germany’s renowned car audio magazine, “autohifi”.
linearity and directivity of these speakers improve low- and mid-frequency reproduction, with extra-smooth, expansive highs and lows.
Bigger, Deeper, Truer Bass
SPL Champion Series Subwoofers
Pioneer’s SPL Subwoofer TS-W5102SPL won the 2006
IASCA IdBL World Finals, becoming the world’s first sub able to go beyond the 180 dB Sound Pressure Level threshold. The innovation that went into this winner is now part of the qualities built into the Pioneer
Champion series subwoofers that give clear, balanced bass awesome punch.
3
W M A / M P 3 P l a y e r s
P L A Y W I T H P L E A S U R E
Beyond spinning discs, Pioneer CD player head units extend the possibilities of car entertainment.
Brilliant Full-Color or Pure Blue OEL displays present motion picture and 3D animated graphics as lively accompaniment to car audio entertainment. The system interfaces also connect to the growing universe of portable digital audio players for extra-easy access and control.
4
DEH-P8850MP
4-Channel High-Power WMA/MP3/AAC/CD Receiver
• Full-color dot-matrix OEL (Organic EL) display
• iPod® adapter ready
• USB adapter ready
• Burr Brown D/A Converter
• Built-in DSP
—Auto EQ
—Digital listening position selector
—Auto time alignment
—BMX (Bitmetric Equalizer)
— L/R common 16-band digital graphic equalizer
• Auto-slide face
• Rotary Commander
• 3 RCA pre-outs (front + rear + subwoofer)
• AUX-in (rear)
• Level indicator
• Spectrum analyzer
• Multi-language display
(English/Spanish/
Portuguese)
Full-Color OEL (Organic EL) Display
DEH-P8850MP
Pioneering the First Receiver with 65 536-Color OEL Display
Pioneer presents the DEH-P8850MP with full-color (65 536-color*)
OEL display capable of displaying motion and 3D animated graphics in multiple colors. Featuring OEL technology that is arguably the greatest advance in car entertainment displays since the detachable face was introduced, this innovation complements Pioneer’s renowned audio quality with a dash of uniquely brilliant visual impact.
* Up to 256 colors can be displayed simultaneously in animated images.
Customizable Displays
Now, Pioneer makes it easy to personalize the graphics on your OEL display. From a Pioneer website, download the software that you need to create and edit BMP, JPEG or PNG images. You can add animation, special effects, titles and more. Once the data is complete, burn it onto a CD-R. Then, insert the disc into a DEH-P8850MP head unit to upload the customized images and put them on view.
Choose among four types of gauges to view battery voltage, tachometer and sound level information.
Analog
Digital 1
Other Images
CD jacket search
Graphic
Digital 2
Movie “Space Elevator”
Advanced DSP (Digital Signal Processor)
With many of the most technologically advanced digital signal processing system refinements built in, Pioneer’s
DEH-P8850MP and DEH-P80RS head units achieve the ultimate in-car sound quality, setup, and control, featuring:
• Digital 16-band graphic equalizer for the extra-precise adjustment of sound quality and balance that you need to customize sound exactly as you like.
DEH-P8850MP DEH-P80RS
• Emperor Volume control for more gradual, consistent volume shifts.
• Burr Brown advanced segment-type DAC (Digital-to-Analog
Converter) offering 24-bit resolution for outstanding dynamic performance. (DEH-P80RS only)
• Burr Brown 1-bit DAC offering 24-bit resolution throughout a wide dynamic range and excellent signal-to-noise ratio for purer fidelity.
(DEH-P8850MP only)
Auto Time Alignment
DEH-P8850MP FH-P9200MP
Pioneer’s innovative Auto Time Alignment automatically shifts the soundstage in front of listeners, and brings out vocals in the process.
First, a microphone at the listening point measures the time that the sound from each speaker takes to reach the listener (rather than listener-to-speaker distance), accurately accounting for sound reflection and absorption. Then, output timing is automatically adjusted for more expansive effect.
DEH-P80RS
20
Auto Time Alignment Adjustment Example
After adjustment
Before adjustment
Frequency (Hz)
After adjustment:
Subtle nuance reproduced.
20 k
Before adjustment:
Rough frequency response curve; unclear overall sound.
Auto TA & EQ: Checking
Subwoofer (DEH-P80RS)
Auto TA & EQ: Measuring
Speaker (DEH-P80RS)
Auto TA & EQ: Adjusting EQ
(DEH-P80RS)
Time Alignment
Image
Digital delay processing makes all speakers sound as if they are virtually equidistant from the listener, for a clearer, front-focused soundstage.
Auto EQ
DEH-P8850MP FM-P9200MP DEH-P80RS
Finding the ‘sweet spot’ or optimal listening position is complicated by sound’s reflection and damping, as well as variable speaker positioning in the irregularly shaped confines of a car. Such conditions tend to degrade frequency characteristics.
Auto EQ helps you enjoy the best sound quality you can get in a car, using a microphone to monitor acoustic conditions, then automatically setting frequency response curve equalization. It’s like having a sound engineer customize your in-car sound system.
Auto EQ Adjustment Example
After adjustment
Before adjustment
20
Frequency (Hz)
For smoother low- to high-range sound.
20 k
Microphone for Auto EQ frequency band fine-tuning
AUI (Auditory User Interface)
DEH-P8850MP
There’s no need to glance at the display to confirm system status.
The DEH-P8850MP’s AUI can emit a distinctive sound for each of these functions: ON, Function, and Select. This makes it easy to know what the system is doing while you safely keep your eyes on the road.
PC-Link (OEL Screensaver Studio) Ready
DEH-P8850MP
Personalizing animation for your head unit is easy. Download exclusive
PC-Link software from the website* for PC-Link users, then collect your favorite digital camera images (BMP, JPEG or PNG formats) or digital video clips (AVI format) on your computer. Use the software to edit the images and movies; add special effects and text; and adjust frame size, timing and sequence. Save your new design on a CD-R. Then load the disc into the DEH-P8850MP head unit, and the files upload automatically.
* DEH-P8850MP: http://www.pioneer.co.jp/car/pclink4/index-e.html
Available from late April 2006. Ask your nearest dealer about details.
5
W M A / M P 3 P l a y e r s
DEH-P7950UB
4-Channel High-Power WMA/MP3/AAC/CD Receiver
• Pure blue dot-matrix OEL
(Organic EL) display
• iPod® direct control* (use with
CD-IU50)
• USB 2.0 (full speed)
• BMX (Bitmetric Equalizer)
• 24-bit Delta Sigma D/A Converter (USB)
• EEQ
—7-band digital graphic equalizer
• Auto-slide face
• Rotary Commander
• Direct Sub Drive
• 3 RCA pre-outs
(front + rear + subwoofer)
• AUX-in (rear)
• Level indicator
• Spectrum analyzer
• Multi-language display
(English/Spanish/Portuguese)
* See below connection example for the details.
DEH-P6950IB
4-Channel High-Power WMA/MP3/AAC/CD Receiver
• iPod® direct control
• USB adapter ready
• Pure blue dot-matrix OEL (Organic EL) display
• BMX (Bitmetric Equalizer)
• EEQ
—7-band graphic equalizer
• Rotary Commander
• Direct Sub Drive
• 3 RCA pre-outs (front + rear + subwoofer)
• AUX-in (rear)
• Spectrum analyzer
• Multi-language display
(English/Spanish/Portuguese)
• Flap face
6
USB Direct Connection
DEH-P7950UB
Simply plug in USB-compatible equipment (such as an iPod nano, iPod®, or another portable digital player or USB memory device) into the rear
USB connector of the DEH-P7950UB head unit. This direct, high-speed, adapter-free connection plus built-in 24-bit Delta Sigma D/A Converter
(to improve DAC) assure extraordinary sound quality as well as optimal convenience.
Connection Example for USB Devices Compatible with MSC
Portable media player’s original cable
DEH-P7950UB
0.2 m (pigtail)
1.5 m
A type (f) A type (m) A type (f)
Extended cable (1.5 m) included.
A type (m) Mini-B (m)
Not compatible with
DRM contents for portable media player
CD-IU50*
Interface Cable for iPod®
A type (m) (for iPod®) iPod nano iPod®
USB connector-male (m)
USB connector-female (f)
USB memory device
* CD-IU50 Interface Cable for iPod® optionally available for connecting an iPod nano or iPod® to the DEH-P7950UB.
NOTE: An iPod® adapter (CD-IB100II), sold separately, is needed to connect the DEH-P7950UB to an iPod® preceding the current fifth-generation iPod®. Composite image shown in iPod® display.
CD-IU50
Interface Cable for iPod®
Optionally available for connecting an iPod nano or iPod® to the
DEH-P7950UB.
Pure Blue OEL Display
DEH-P7950UB DEH-P6950IB
Pioneer again sets the trend in putting a fresh, brilliant look on display.
The Pure Blue OEL display offers a cool, youthful perspective on car entertainment, with eye-catching contrast and brightness, choice of 3D animation images and a wide viewing angle range for clear, trouble-free viewing from virtually any position, even in sunlight. Tabbed menus speed up and simplify monitoring of functions. Display graphics match head unit buttons for smart, easy operation. BGV (Background Visual) function offers various backdrops designed to add interest to source information onscreen.
2-Layer Visualizer
Air Surfing (DEH-P7950UB)
Front: Visualizer
+
Spectrum Analyzer (DEH-P6950IB) Rear: BGV
Stargate (DEH-P6950IB)
Visualizer 2 (Pentagon)
Rotary Commander
DEH-P8850MP DEH-P7950UB DEH-P6950IB DEH-P80RS
For quick, easy access among even huge volumes of files stored in AAC, MP3 or WMA format, just touch or turn a finger left, right, up, down or center on the Rotary Commander. You can even precisely control graphic equalizer functions of whichever equalizer curve that you select (among Super Bass/Powerful/
Natural/Vocal/Custom-1/Custom-2/Flat).
DEH-P5950IB
4-Channel High-Power WMA/MP3/AAC/CD Receiver
• iPod® direct control
• USB adapter ready
• Segmented OEL display
• BMX (Bitmetric Equalizer)
• EEQ
—3-band parametric equalizer
• Rotary volume
• Direct Sub Drive
• 3 RCA pre-outs (front + rear + subwoofer)
• AUX-in (rear)
• Flap face
iPod® Direct Connection
DEH-P6950IB DEH-P5950IB
Connect an iPod®* to a Pioneer DEH-P6950IB or DEH-P5950IB for very convenient, direct control of menus (including the latest shuffle function) and songs stored in the iPod® through the head unit front interface. This connection also recharges your iPod® during playback, eliminating concerns about battery depletion.
* A 3rd-, 4th- or 5th-generation iPod® can be connected to either of these head units.
iPod® Direct Connection for DEH-P6950IB and DEH-P5950IB
Rear
2 m
CD-I200
Interface Cable for iPod® iPod nano iPod®
Composite image shown in iPod® display.
Segmented OEL Display
DEH-P5950IB
Clarity, brightness and contrast are balanced to perfection on Pioneer head unit organic electroluminescent displays. An uncluttered two-line character readout is straightforward and easy on the eyes. A wide viewing angle range makes entertainment system operating information simple to monitor from any position under all circumstances.
CD-I200
Interface Cable for iPod®
Optionally available for connecting iPod nano or iPod® to the DEH-P6950IB or
DEH-P5950IB.
7
W M A / M P 3 P l a y e r s
DEH-P4950MP
4-Channel High-Power WMA/MP3/AAC/CD Receiver
• USB adapter ready
• iPod® adapter ready
• BMX (Bitmetric Equalizer)
• EEQ
—3-band parametric equalizer
• Rotary volume
• Direct Sub Drive
• 3 RCA pre-outs (front + rear + subwoofer)
• AUX-in (rear)
8
IP-Bus USB and iPod® Adapter
Ready
Open up your ears—it’s easy to gain freedom of choice among MP3,
WMA, AAC and WAV digital music formats. If your Pioneer head unit is without USB or iPod® interface, you can connect your external digital device using Pioneer’s optional IP-Bus USB Adapter or iPod® Adapter.
Connection Example for IP-Bus Head Unit and Adapters
IP-Bus connection
CD-IB100II
iPod® Adapter
IP-Bus head unit
CD-UB100
IP-Bus USB Adapter
Not compatible with
DRM contents for portable media player
USB memory device iPod®
Composite image shown in iPod® display.
CD-UB100
IP-Bus USB Adapter
This adapter makes it easy to expand a listening library by connecting a head unit to a portable digital player or USB memory device to gain convenient access to digital music files that have been compiled and edited on a PC, then transferred to the portable device.
NOTE: Unauthorized copying of music is strictly prohibited. Not every device is compatible. See more details in Pioneer website. Compatible with USB memory device only. Not compatible with DRM
(Digital Rights Management) contents and MTP (Media Transfer Protocol) connection players.
CD-IB100II
iPod® Adapter
Play as long as you like. Pioneer’s iPod® adapter CD-IB100II makes it easy to access any of up to 15 000 tracks* stored in various digital compression formats on an iPod® portable music player connected to
Pioneer’s latest head units**.
* iPod® capacity depends on iPod® model and compression format.
** Details on page 11.
NOTES: iPod is for legal or rightholder-authorized copying only. Don’t steal music. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Depending on the Pioneer head unit installed, some functions may be limited using iPod® adapter.
AUX-In Connection
All models*
* Except FH-P9200MP, FH-P5000MP, FH-P4200MP, KEH-P4025, KEH-P2035, RS-D7RII and DEX-P90RS
Each of Pioneer’s latest head units has a built-in AUX input for connecting a digital portable player and other external auxiliary devices. For extra-convenient access, the DEH-P3950MP,
DEH-2950MP and DEH-1950 have this input on the front panel.
iTunes® AAC (Advanced Audio Coding) Playback
DEH-P4950MP
DEH-P8850MP
FH-P4200MP
DEH-P7950UB
DEH-P80RS
DEH-P6950IB DEH-P5950IB
Pioneer’s head units play music file formats of AAC (Advanced Audio
Coding) using Apple iTunes® software. With Apple iTunes®, transferring your favorite songs and albums from CDs is quick and easy. Just pop a disc into your Mac or PC, and click the Import button to record to your library of tunes in MP3, AAC, or other formats at the quality level you choose.
NOTES: iTunes is a trademark of Apple Computers Inc., registered in the U.S. and other countries.
AAC players can decode only those AAC files ripped and encoded using iTunes®.
Bass Boost
DEH-P7950UB
Bass Boost
DEH-P6950IB DEH-P5950IB DEH-P4950MP DEH-P3950MP
Bass Boost offers a choice between 0 to 12 dB level settings that can be adjusted in 2 dB steps, letting you set the optimal bass level for each speaker and subwoofer connected to a system, according to preference and music style.
Compressed Audio File Playback
From standard issue CDs
A single CD-R/RW disc iTunes® (Ver. 4.8)
Copying files
DEH-P4950MP
Ripping audio data to PC
Making compressed audio files—AAC, MP3, etc.
iPod®
Composite image shown in iPod® display.
CD-IB100II iPod® Adapter
The result is more precise control over the balance of sounds to enhance the overall impact of the music you listen to.
Bass Boost (fc = 100 Hz)
14
12
10
4
2
8
6
0
–2
10.0
100.0
1000.0
Frequency [Hz]
10000.0
100000.0
DEH-P3950MP
4-Channel High-Power WMA/MP3/CD Receiver
• USB adapter ready
• iPod® adapter ready
• BMX (Bitmetric Equalizer)
• EEQ
—3-band parametric equalizer
• Rotary volume
• Direct Sub Drive
• 2 RCA pre-outs: selectable
(front + rear/front + subwoofer)
• AUX-in (front)
DEH-2950MP
4-Channel High-Power WMA/MP3/CD Receiver
• BMX (Bitmetric Equalizer)
• Rotary volume
• 1 RCA pre-out (rear)
• AUX-in (front)
S i n g l e - C D P l a y e r
DEH-1950
4-Channel High-Power CD Receiver
• Rotary volume
• 1 RCA pre-out (rear)
• AUX-in (front)
Multi-Format Compatibility*
With capability to play MP3, WMA (Windows Media TM Audio), iTunes®
AAC (Advanced Audio Coding), WAV digital audio files recorded onto various devices and media (USB memory, iPod®, portable media player,
CD-R/RW), Pioneer car entertainment systems accommodate the most universally accepted digital compression encoding standards.
* MP3/WMA: Compatible with all models except DEH-1950, KEH-P4025, KEH-P2035, RS-D7RII and
DEX-P90RS
AAC: Compatible with DEH-P8850MP, DEH-P7950UB, DEH-P6950IB, DEH-P5950IB, DEH-P4950MP,
FH-P4200MP and DEH-P80RS
NOTES: Windows Media and the Windows logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
BMX (Bitmetric Equalizer)
All models*
*Except DEH-1950, FH-P9200MP, KEH-P4025, KEH-P2035, RS-D7RII and DEX-P90RS
Audio compression formats such as MP3 and WMA tend to lose high-frequency sound levels, especially in passages when recorded signal input is weak.
Pioneer’s BMX (Bitmetric Equalizer) compensates for this by boosting playback of upper frequency sound, to the benefit of overall musical balance.
• BMX1: Recommended for enhancing brightness and depth of sound and sense of ambient space.
• BMX2: Recommended for even richer sound (more volume in the low and middle range) than BMX1 offers.
Direct Sub Drive
DEH-P7950UB DEH-P6950IB DEH-P5950IB
Combine the MOSFET 50 W × 4 power amp and EEQ technology to get
Direct Sub Drive, another unique Pioneer technology. It enables you to amplify your front speakers by 50 W × 2 and add a 70 W amplified
DEH-P4950MP DEH-P3950MP filtered subwoofer (in 2 ohm mode) in the rear to enjoy outstanding full-power bass without an extra amplifier. It’s an easy solution for lovers of booming bass.
9
2 - D I N P l a y e r s
FH-P9200MP
4-Channel High-Power WMA/MP3/CD/MD Receiver
Microphone for
Auto EQ
• Dot-matrix OEL (Organic EL) display
• USB adapter ready
• iPod® adapter ready
• Built-in DSP
—Auto EQ
—4-mode digital SFC
—Digital listening position selector
—Auto time alignment
—Digital 13-band graphic equalizer
—3-way digital network
• MDLP with ATRAC 3
• Auto-slide face
• Pop-up rotary volume
• 3 RCA pre-outs (front + rear + subwoofer)
• Level indicator
• Spectrum analyzer
FH-P5000MP
4-Channel High-Power WMA/MP3/CD/Cassette Receiver
• USB adapter ready
• iPod® adapter ready
• BMX (Bitmetric Equalizer)
• Burr Brown D/A Converter
• Built-in DSP
—Digital listening position selector
—Time alignment
—Digital 13-band graphic equalizer
• Auto-slide face
• Dolby B NR
• Color changeable illuminated bar
(10 colors, plus Rainbow and Mirage modes)
• 2 RCA pre-outs: selectable (front + rear/ front + subwoofer)
• Level indicator
• 7-band spectrum analyzer
FH-P4200MP
4-Channel High-Power WMA/MP3/AAC/CD/Cassette Receiver
• USB adapter ready
• iPod® adapter ready
• BMX (Bitmetric Equalizer)
• Digital direct
• Built-in DSP
—3-mode digital SFC
—Digital listening position selector
—Digital 9-band graphic equalizer
• Dolby B NR
• 1 RCA pre-out: selectable (subwoofer/ non-fading)
• 5-band spectrum analyzer
• Level indicator
M u l t i - C D P l a y e r s
CDX-P1280
IP-Bus 12-Disc Multi-CD Player
CDX-P680
IP-Bus 6-Disc Multi-CD Player
CDX-FM1287
FM-Modulated 12-Disc Multi-CD Player
CDX-FM687
FM-Modulated 6-Disc Multi-CD Player
• CD-R/RW playback with skip play
• ADPS (Automatic Disc Program Selection)
• Disc title memory: 100 titles
• ITS (Instant Track Selection)
10
• CD-R/RW playback with skip play
• Built-in FM modulator
• Display with control key
• Wireless card remote controller (included)
• ADPS (Automatic Disc Program Selection)
CDX-FM1287
Display with control key
• Disc title memory: 100 titles
• ITS (Instant Track Selection)
• IP-Bus output for direct head unit connection
C a s s e t t e P l a y e r s
KEH-P4025
4-Channel High-Power Cassette Receiver
• iPod® adapter ready
• Full-logic mechanism
• 1 RCA preout (rear)
KEH-P2035
4-Channel High-Power Cassette Receiver
CD-R30-02
(Optional remote controller)
• Multi-CD control
• Optional remote controller available
• iPod® adapter ready
• BTB (Bass/Treble Booster)
• 2-mode selectable loudness
• 1 RCA preout (rear)
• Radio intercept
• Multi-CD control (pause and repeat)
Built-in 50 W × 4-Channel High-Power MOSFET Amplifier
To minimize voltage loss in its head unit amplifiers, Pioneer builtin high-performance Power MOSFET integrated circuitry that processes signals efficiently at 50 W × 4 maximum total output.
High-speed MOSFET switching reduces distortion to virtually nothing at high frequency ranges, thanks to superior characteristics of linearity that smooth the signal transmission path from input to output. Pioneer’s independent routing of
All models*
* Except KEH-P2035, RS-D7RII and DEX-P90RS
input and output current is essential to obliterating distortion.
High power of 50 W per channel and characteristics of the bonding wire ensure excellent sound quality. The 99.99 % pure OFC (oxygen-free copper) bonding wire has low electrical resistance, so minimal electric power is lost as heat in the IC chip, enhancing power handling efficiency as well as sound quality.
Power MOSFET high-power IC chip
EEQ (Easy Equalizer)
All models*
* Except KEH-P2035, RS-D7RII and DEX-P90RS
Sound shaping is at your command. You can adjust the sound according to in-car acoustic characteristics and the music you listen to.
5-Mode Preset Equalizer
You can switch among five preset equalization curves* (Super Bass/
Powerful/Natural/Vocal/Flat) simply by pushing an EQ button. Each of these settings boosts bass and high-frequency ranges in ways that suit the music best.
*Dynamic/Powerful/Natural/Vocal/Flat in the DEH-2950MP and DEH-1950.
2-Mode Custom Preset Equalizer
Create and memorize your favorite equalization curves from an amazing variety of sound-shaping dimensions and combinations, just as you like.
Custom-1 mode can memorize adjusted preset curves using 7-band* digital equalizer settings for each source (Source EQ memory).
Custom-2 mode can register your favorite custom curve (based on
Flat mode** curve) for all sources using the 7-band* digital equalizer.
* L/R common 16-band for DEH-P8850MP and L/R independent 16-band for DEH-P80RS.
** Flat mode also remains after customizing equalization curve.
1-Mode Custom Preset Equalizer
Pioneer’s head units feature a 1-mode custom preset equalizer for creating your favorite sound curve from an amazing variety of sound-shaping dimensions/ combinations exactly as you like. This mode can memorize adjusted preset curves by 3-band parametric equalizer* settings for each source.
*Bass/mid/treble equalizer for DEH-2950MP and DEH-1950.
2-Way Crossover (HPF/LPF)
Our most feature-loaded models allow extra EEQ flexibility with selectable HPF (High Pass Filter) and LPF (Low Pass Filter). Head units of these systems can perform as amplifiers or separate crossover units for easier system control, particularly of low-frequency signals.
3-Mode Selectable Loudness
Select among three levels (high/mid/low) to instantly boost volume when driving noise overpowers in-car sound.
2-Mode Selectable Loudness
Select high or low volume boost level when extraneous noise drowns out your sound system.
Selectable FIE (Front Image Enhancer)
Enhance front sound imaging without sacrificing rear speaker bass.
You can choose among three effect settings.
5-mode preset equalizer preset =
DEH-P8850MP DEH-P7950UB DEH-P6950IB DEH-P5950IB DEH-P4950MP DEH-P3950MP DEH-2950MP DEH-1950 FH-P9200MP FH-P5000MP FH-P4200MP KEH-P4025 DEH-P80RS
• • • • • • • • • • • • •
Digital graphic equalizer <16 = 16-band, 13 = 13-band,
9 7-band>
16
16
9
L/R
2-way crossover: HPF/LPF <L/R = L/R independent>
3-band parametric equalizer
Bass Boost
Selectable loudness <3 = 3-mode, 2 = 2-mode>
Selectable FIE (Front Image Enhancer)
• •
•
•
3
•
•
3
•
•
3
•
•
•
3
•
•
•
•
3
•
2 2
• • •
L/R
3
•
Connect With Your Portable
Any Portable Full iPod® Control Control USB
Flash Memory
†
What you can do with . . .
DEH-P8850MP
DEH-P7950UB
AUX Input
Built-In
Built-In iPod®
Composite image shown in
iPod® display.
CD-IB100II
CD-IU50
††
USB Mass
Storage Class
CD-UB100*
Built-In
DEH-P6950IB
DEH-P5950IB
DEH-P4950MP
DEH-P3950MP
DEH-2950MP
Built-In
Built-In
Built-In
Built-In (Front)
Built-In (Front)
CD-I200
CD-I200
CD-IB100II*
CD-IB100II*
CD-UB100
CD-UB100
CD-UB100*
CD-UB100*
DEH-1950
Built-In (Front)
DEH-P80RS
Built-In CD-IB100II
* External control
† Not every device is compatible. See more details in Pioneer website. Compatible with MSC (Mass Storage Class). Not compatible with DRM (Digital Rights Management) contents.
†† Compatible with iPod® (5th generation or later/Firmware Version 1.2 or later/iPod nano Version 1.2 or later). A 3rd or 4th generation iPod® requires CD-IB100II.
CD-UB100*
11
O D R & P u r e C o m p o n e n t Sy s t e m s
P U S H F O R P U R E R P E R F E C T I O N
As an innovator, Pioneer doesn’t compromise. This approach takes purest form in Optical Digital
Reference (ODR) and Pure Component—head unit, power amp and speaker systems created in pursuit of sound approaching original source quality, and crafted to perfection to ride the digital era at the cutting edge of car audio.
ODR (Optical Digital Reference) and RS Speaker Systems
RS-D7RII
Component CD Receiver
• High precision sound master clock circuitry
• Hi-quality CD drive
• Hi-bit conversion
• Digital direct
• Frequency change: 96 kHz to 44.1 kHz
• Source DVD control
• Digital optical input/output
• IP-Bus input/output
• External unit control via IP-Bus (2 units)
• AUX-in (with optional CD-RB20)
• White dot-matrix OEL (Organic EL) display
• Auto-slide face
• Rotary volume (High quality feel is enhanced by using aluminum for the volume and cross key while adding spinning graved finish on it)
• Use of dual LED for button illumination (White or red selectable)
• Display off mode
• OFC power/ground cable
• Dual illumination (white or red selectable)
Red illumination
RS-P90
Universal Digital Pre-Amplifier
• Advanced Segment 24-bit D/A Converter
• Digital listening position selector
• Time Alignment
• Parametric bass/treble control
• 31-band L/R independent graphic equalizer (1/3 oct.) with level control (±12 dB/0.5 dB steps)
• 3-band L/R independent parametric equalizer (1/3 oct.) with level control (±12 dB/0.5 dB steps)
• 4-way independent L/R crossover network
(high/mid/low/subwoofer)
—Crossover frequency: 20 Hz to 20 000 Hz (1/3 oct.)
—Crossover slope: 0 dB to –72 dB
—Crossover presets: 5
• Gold-plated 8-channel RCA output
(high/mid/low/subwoofer)
• Gold-plated screw-type power/ground terminals
• The one-sided terminals and the square aluminum bonnet that rotates by every 90 degrees considered for installation
• High-performance 32-bit floating binary point type DSP
12
High-Precision Sound Master Clock Circuitry
RS-D7RII
The latest integrated circuits require superior clock signal quality to handle digital data accurately without distortion at ever-higher speeds. Dual independent Sound Master
Clock Circuitry in the RS-D7RII generates clock waveforms to read and process digital signals with ultra-precision, and eliminate jitter noise in transmission. The result: extraordinarily clear, pure sound.
Clock circuit board
High-Performance SHARC Digital Signal
Processors
RS-P90
For remarkably precise 32-bit sound processing, the circuitry of the RS-P90 is mounted with three high-performance Analog Devices
SHARC DSPs, for left-channel, right-channel and coefficient calculation.
High-performance
SHARC DSP × 3
RS-A9
Digital Integrated Power Amplifier
600 W MAX.
• 50 W × 4 (4 Ω)/75 W × 4 (2 Ω)/
150 W × 2 (4 Ω) (continuous power)
• 100 W × 4 (4 Ω)/300 W × 2 (4 Ω)
(max. power)
• High-performance 32-bit floating binary point type DSP
• Built-in DSP (Digital Signal Processor)
(FIR)
RS-A7
Digital Power Amplifier
• 50 W × 4 (4 Ω)/75 W × 4 (2 Ω)/150 W × 2 (4 Ω)
(continuous power)
—31-band L/R independent digital
graphic equalizer (±12 dB/0.5 dB
steps)
—3-band L/R independent digital
parametric equalizer (±12 dB/
0.5 dB steps)
—5-mode preset memory
—Time alignment
—Digital listening position selector
—Parametric bass/treble controls
—Digital compression
—4-way L/R independent digital
crossover network (high/mid/
low/subwoofer)
—Crossover frequency: 20 Hz to
20 000 Hz (variable)
—Crossover slope: 0 dB to –72 dB
• 1 optical digital input
• 3 optical digital outputs
(mid/low/subwoofer)
600 W MAX.
• 100 W × 4 (4 Ω)/300 W × 2 (4 Ω) (max. power)
• 2 optical digital inputs
RS-A9
Common Features
• Bridgeable 2/3/4-channel capability
• Current feedback amplifier
• Full balanced system (bridgeable connection)
• Multi 24-bit Burr Brown D/A converters
• IP-Bus input/output
• Gold-plated screw-type speaker terminals
SHARC® DSP chip
• Gold-plated large screw-type power/ ground terminals
• Low load impedance capability
(2 ohm to 8 ohm)
• Copper-plated chassis
• L/R independent power supply
• Sound master clock
• DAC volume
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
TS-W01RS
25 cm (10") Component Subwoofer
300 W MAX.
• 25 cm cone woofer with integrated dust cap
• Space-saving small-enclosure-type design
(recommended enclosure: 14 l to 28 l/
0.49 cu.ft. to 0.99 cu.ft.)
• Biased thickness type butyl rubber surround
• Large-sized ø140 mm voice coil with multiple neodymium magnets
• Shallow mounting aluminum die-cast basket
• Gold-plated large screw-type terminals
TS-S01RS
7.7 cm Component Midrange Speaker
50 W*/60 W** MAX.
* With speaker unit only
** With back chamber
TS-S01RS with back chamber
• 7.7 cm cellulose cone midrange speaker
• DLC (Diamond Like Carbon) coated titanium dust cap
• Zinc die-cast back basket
• Glass cloth voice coil bobbin
• Heat-resistant ribbon voice coil with neodymium magnet
• Gold-plated large screw-type terminals
TS-M01RS
17 cm Component Mid-Bass Speaker
TS-T01RS
3.5 cm Component Tweeter
120 W MAX.
• 3.5 cm tweeter with dual arc ring diaphragm*
• Lightweight aluminum voice coil with neodymium magnet
• Ion-plated titanium diaphragm
• Zinc die-cast frame
• Tungsten cone holder* with anti-resonance structure
• Aluminum die-cast mounting bracket included
• Gold-plated large screw-type terminals
• Use with UD-N01RS 2-Way Passive Crossover Network
* Patent pending
UD-N01RS
2-Way Passive Crossover Network
• Use with TS-M01RS and TS-T01RS
120 W MAX.
• 17 cm cone mid-bass speaker
• Corrugation surround
• Copper ribbon short voice coil with neodymium magnet
• Bottom hold design zinc die-cast one-piece chassis
• Tungsten damper holder* with anti-resonance structure
• Gold-plated large screw-type terminals
• Use with UD-N01RS 2-Way Passive Crossover Network
* Patent pending
Large ø140 mm Voice Coil
TS-W01RS
The TS-W01RS’s magnetic circuit structure uses a voice coil with large
ø140 mm diameter to drive the center part of the entire speaker cone to improve transient.
Multiple neodymium magnets creating powerful magnetic flux help drive the cone with exceptional strength and accuracy.
The large vent in the center of the speaker back is maximized for fine control to reduce air resistance. The result: more accurate bass reproduction.
Compact Enclosure
We design our subwoofer cones for compact
(14 to 28 liters) speaker enclosures.
Shallow mounting aluminum die-cast basket and large
ø140 mm voice coil
Dual Arc Ring Tweeter Diaphragm*
TS-T01RS
The TS-T01RS’s Dual Arc Ring Diaphragm, based on Pioneer’s Super
Wide Range Tune innovation, reliably reproduces clear sound audible up to super-high 48 kHz frequency.
The inside and outside of the center drive-type ring diaphragm are shaped differently from each other, and vibrate to varying degrees for various frequencies. But these frequencies are mixed in such a way as
High-Quality Mid-Bass Pulp Cone
TS-M01RS
We carefully choose the pulp fiber mix of our speaker cone material to ensure the proper characteristics for optimal quality and linear reproduction of sound throughout a wide frequency range.
Dust cap uses high-inner-loss-type pulp exclusively developed for superior smooth frequency response. Dust cap has a concave shape, and suppresses resonance inside the magnetic circuits.
Its corrugation surround effectively absorbs unwanted vibration, achieves excellent linearity and reduces interference of cone and surround.
Corrugation surround to achieve smooth characteristics (which is good in terms of sound reproduction). The diaphragm, made of light, rigid titanium is ion-plated on its surface, helping to minimize distortion. 35 mm in diameter, it offers to extend low-frequency reproduction and precise, accurate sound staging.
* Patent pending
Dual arc ring diaphragm
13
O D R & P u r e C o m p o n e n t Sy s t e m s
HQ Active Component Systems
DEX-P90RS
Component CD Receiver
• White dot-matrix OEL (Organic EL) display
• Source DVD control
• Multi 24-bit D/A Converters with 8× oversampling digital filter
• Rotary volume
• Auto-slide face
• 3 gold-plated RCA pre-outs (front + rear + non-fading)
• Optical input/output
• External unit control via IP-Bus (2 units)
• AUX-In (with optional CD-RB20)
• High-quality hairline aluminum front panel
• Display off mode
DEQ-P90
Component Digital Signal Processor
• Built-in DSP
—Multi 24-bit Burr Brown D/A Converters
—5-mode preset equalizer
—Digital listening position selector
—Time alignment
—Parametric bass/treble controls
— 31-band L/R independent equalizer
(±12 dB/0.5 dB steps)
• Built-in crossover network (L/R)
—Crossover frequency: 20 Hz to 20 000 Hz
(variable)
—Crossover slope: 0 dB to –36 dB
—Crossover presets: 5
• 4-way independent L/R crossover network
(high/mid/low/subwoofer)
• Optical input (with DEX-P90RS)
• Gold-plated 8-channel RCA output
(high/mid/low/subwoofer)
• Gold-plated screw-type power/ground terminals
TS-W12PRS
30 cm (12") Component PRS Subwoofer
TS-M171PRS
17 cm Component PRS Mid-Bass Speaker
TS-S101PRS
10 cm Component PRS Midrange Speaker
TS-T031PRS
28 mm Component PRS Soft-Dome Tweeter
1200 W MAX.
200 W MAX.
60 W MAX.
200 W MAX.
14
• 30 cm (12") enclosure use subwoofer
• KEVLAR® Brand Fiber/pulp composite cone with integrated VCCS (Voice Coil Cooling System)
• Dual-layer rolled urethane surround
• Dual Voice Coil (DVC) design (2 × 4 Ω)
• 4-spoke aluminum die-cast basket
• Gold-plated binding posts
• Small enclosure capability
• Spoke grille compatible (UD-G307)
• 3-layer aramid fiber with IMPP composite cone
• Heat-resistant ribbon voice coil
• High density micro fiber surround for smoother response
• Aluminum die-cast basket
• Gold-plated screw-type terminals
• Spoke grille included
• Dual layer cone with aramid and pulp
• High density micro fiber surround for smoother response
• Heat-resistant ribbon voice coil with neodymium magnet
• Glass cloth voice coil bobbin
• Aluminum die-cast basket
• Gold-plated screw-type terminals
• Spoke grille included (removable magnet cover for flexible mounting)
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
The Ultimate in Audio Tech
For Component Single-CD Player
RS-D7RII DEX-P90RS
Hi-Bit Conversion
The RS-D7RII and DEX-P90RS upgrade the original CD audio signals from 16-bit to 24-bit, and increase CD data resolution by a factor of 256.
The result: lower quantization noise, expanded dynamic range, minimal processing error, and superior linearity, delivering sound as it was meant to be reproduced and heard.
For RS and PRS Power Amplifiers
Current Feedback Type Power Amplifier Circuitry*
For high-resolution sound amplification, this circuitry uses MOSFET** in the final output stage for extremely high slew rate that results in quicker input signal response, wide range characteristics and low distortion.
*RS-A9/RS-A7/PRS-A500
**PRS-D2000SPL/PRS-D1200SPL/PRS-D4100F/PRS-D2100T/PRS-D1100M/PRS-A500
L/R Independent Power Supply*
This new circuit design’s L/R independent symmetric layout improves channel separation. Independently mounted large DC-DC converter power supply directs electric current more effectively, with superior stability.
*RS-A9/RS-A7/PRS-A500
• 28 mm polyester soft-dome tweeter with dual neodymium magnet
• Heat-resistant voice coil
• Aluminum die-cast cabinet
• Gold-plated screw-type terminals
• Surface, flush or invisible tweeter mounting kit
For Digital Signal Processor
RS-A9 RS-P90 DEQ-P90
4-Way L/R Independent Digital Crossover Network
Optimize the balance of speaker output by adjusting sound pressure level or left and right channels independently, according to listener position and system configuration.
Time Alignment
Signal output of each speaker can be calibrated in
1/20 000-second* increments, for optimal phasing of sound from the system, according to listener position.
Precise equalization and suppression of frequency response disturbance makes for a clearer, more focused soundstage.
*RS-A9: 1/40 000-second
Digital delay processing makes all speakers sound as if they are virtually equidistant from the listener, for a clearer, front-focused soundstage.
31-Band L/R Independent Digital Equalizer
This finely tunes equalization of the sound curve and independently adjusts for slight differences between left and right channel frequency response for truer, clearer sound.
PRS-D2000SPL
Class-D Mono Amplifier
• 750 W × 1 (4 Ω)/1 500 W × 1 (2 Ω)/
2 000 W × 1 (1 Ω) (continuous power)
• 1 500 W × 1 (4 Ω)/3 000 W × 1
(2 Ω)/4 000 W × 1 (1 Ω) (max. power)
PRS-D1200SPL
Class-D Mono Amplifier
• 500 W × 1 (4 Ω)/1 000 W × 1 (2 Ω)/
1 200 W × 1 (1 Ω) (continuous power)
• 1 000 W × 1 (4 Ω)/2 000 W × 1
(2 Ω)/2 400 W × 1 (1 Ω) (max. power)
4000 W MAX.
• 0/1-gauge, large block-type gold-plated power/ground terminals
2400 W MAX.
• 4-gauge, large block-type gold-plated power/ground terminals
• PWM regulated power supply with
MOSFET switching
The pride of a winner takes world-leading DNA
PRS-D2000SPL
Common Features
Large block-type gold-plated power/ground terminals
(PRS-D2000SPL)
• Variable LPF (40 Hz to 240 Hz, –24 dB/oct.)
• Input level control (400 mV to 6.5 V)
• Low load impedance capability (1 ohm to 8 ohm)
• Gold-plated RCA input and output terminals
• 4-gauge, large block-type gold-plated speaker terminals
• Variable Bass Boost Remote (40 Hz to 120 Hz, 0 dB to +12 dB)
• Subsonic filter (20 Hz, –24 dB/oct.)
• SYNC control
• High-performance balanced isolator circuit
Gold-plated RCA sync control input and output terminals
(PRS-D2000SPL)
• High-efficiency MOSFET output section
• MASS (Multiple Amplifier Synchronization System)
• Removable terminal/settings cover
Class-D Amplifiers
PRS-D2000SPL
Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer’s
Class-D amps transform very little power into heat while a very high percentage of the power supply (67 %) is transformed into the load. This results in a very compact amp which needs little input power to produce very high output power.
The Class-D amplifier’s PWM (Pulse Width
Modulator) modulates the original audio input
PRS-D1200SPL PRS-D1100M GM-D510M signal with another signal which has a much higher fixed frequency. The result is a digital signal which contains the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) will then filter out the high frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.
Current vs. Power
30
20
50
40
10
0
100 200 300 400
Power output (Watt –4 Ω)
500
Class-AB
Class-D
MASS (Multiple Amplifier Synchronization System) Connection Examples
Single-Amplifier Configuration*: 2 000 W RMS
SYNC OUTPUT
Mode select switch must be in
MASTER position.
L
R
– +
PRS-D2000SPL
1 Ω minimum
2 000 W
+
–
PRS-D2000SPL PRS-D1200SPL PRS-D1100M
With the PRS-D2000SPL, PRS-D1200SPL and PRS-D1100M’s SYNC connection, adjustment of the master amplifier also adjusts all other amplifiers in the cascade. This makes control simpler and more convenient.
* These are only a few examples of connection configurations for the PRS-D2000SPL. Ask your nearest car stereo installer or dealer about power/ground wiring and installation details for the PRS-D2000SPL, PRS-D1200SPL and PRS-D1100M.
SYNC INPUT
Signal source
Two-Amplifier Bridged Configuration**: 4 000 W RMS
Mode select switch must be in
MASTER position.
Mode select switch must be in
SYNC INV position.
L
R
Signal source
–
–
+
+
PRS-D2000SPL
2 Ω minimum
4 000 W
+
–
Two-Amplifier Configuration*: 4 000 W RMS
Mode select switch must be in
MASTER position.
Mode select switch must be in
SYNC position.
L
R
Signal source
–
–
+
+
PRS-D2000SPL
+
1 Ω minimum
2 000 W
–
1 Ω minimum
2 000 W
+
–
Wiring for speaker must be 10 AWG minimum.
Load may be any combination of speakers but impedance must be 1 Ω or larger.
Load may be any combination of speakers but impedance must be 2 Ω or larger.
* 1 Ω minimum speaker impedance for this configuration or damage will occur.
** 2 Ω minimum speaker impedance for this configuration or damage will occur.
Caution: Having more than four amps in a sync configuration is not recommended.
Sine waves can put excessive stress on an audio system, so if a sine wave source is used at high output level, damage can occur.
PRS-A500
2-Channel Bridgeable Power Amplifier
600 W MAX.
• 100 W × 2 (4 Ω)/300 W × 1 (4 Ω)/150 W × 2 (2 Ω)
(continuous power)
• 200 W × 2 (4 Ω)/600 W × 1 (4 Ω) (max. power)
• Bridgeable 1/2/3-channel capability
• Current feedback amplifier
• L/R independent power supply
• Variable LPF/HPF (40 Hz to 120 Hz, –12 dB/oct.)
• High-voltage input level control (200 mV to 6.5 V)
• Input level/gain control (L/R independent)
• Low load impedance capability (2 ohm to 8 ohm)
• Carved gold-plated RCA input terminals
• Gold-plated screw-type speaker terminals
• Gold-plated large screw-type power/ground terminals
• PWM regulated power supply with MOSFET switching
• High-performance balanced isolator circuit
• High-efficiency MOSFET output section
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
15
O D R & P u r e C o m p o n e n t Sy s t e m s
Reference Sound Systems
DEH-P80RS
Component CD Player/Receiver
• White dot-matrix OEL (Organic EL) display
• Aluminum-plated face panel
• iTunes® AAC playback
• WAV file playback
• iPod® adapter ready
• USB adapter ready
• Burr Brown advanced segment-type D/A Converter
• Built-in DSP
—EEQ
—5-mode preset equalizer
—2-mode custom preset equalizer
—Auto EQ
—Auto EQ for 3-way network
—BBE® digital sound processing
—Digital listening position selector
—Auto time alignment
—BMX (Bitmetric Equalizer)
—L/R independent 16-band digital graphic
equalizer
—L/R independent 2-way crossover: HPF/LPF
—L/R independent 3-way crossover:
high/mid/low
• Auto-slide face
• Rotary Commander
• 3 gold-plated RCA pre-outs
(front + rear + subwoofer)
• Level indicator
• Spectrum analyzer
• Multi-language display
(English/Spanish/Portuguese)
G E T C L O S E R T O N A T U R E — N E W O P E N & S M O O T H S O U N D
With their extra-wide directivity, low tweeter crossover frequency and distortion, plus light, rigid IMPP cones,
Pioneer’s new PRS speakers realize a level of in-car audio quality that deserves its own name: “Open & Smooth” sound—a rich, natural, wide-open sound balancing midrange and tweeter output with outstanding smoothness and linearity.
Wider Response, Lower Crossover
Pioneer expands lower-frequency response in tweeters for fuller midrange fidelity.
Pioneer’s Tweeter
Reproduction
General Midrange
Frequency Response Curve
General Tweeter
Frequency
Response Curve
PRS-D4100F
Class-FD 4-/2-Channel Bridgeable Amplifier
1200 W MAX.
• 75 W × 4 (4 Ω)/300 W × 2 (4 Ω)/150 W × 4 (2 Ω) (continuous power)
• 150 W × 4 (4 Ω)/600 W × 2 (4 Ω) (max. power)
• Bridgeable 2/3/4-channel capability
PRS-D2100T
Class-FD 2-Channel Bridgeable Amplifier
1200 W MAX.
• 150 W × 2 (4 Ω)/600 W × 1 (4 Ω)/300 W × 2 (2 Ω) (continuous power)
• 300 W × 2 (4 Ω)/1 200 W × 1 (4 Ω) (max. power)
• Bridgeable 1/2-channel capability
• Bass Boost Remote (50 Hz, 0/+6/+9/+12 dB)
Common Features
• Variable LPF/HPF (40 Hz to 500 Hz, –12 dB/oct.)
• Input level control (400 mV to 6.5 V)
• Low load impedance capability (2 ohm to 8 ohm)
• Gold-plated RCA input and output terminals
• Gold-plated screw-type speaker terminals
• Gold-plated large screw-type power/ground terminals
• All terminals placed on one side
• Removable terminal/settings cover
• Speaker level input (1.6 V to 26 V)
PRS-D4100F
• Speaker line input turn-on sensor
• PWM regulated power supply with MOSFET switching
• High-performance balanced isolator input circuit
• High-efficiency MOSFET output section
• Aluminum die-cast heatsink
Class-FD ICEpower Amplifiers
PRS-D4100F PRS-D2100T
Pioneer brings together its cutting-edge Class-D circuitry and ICEpower digital amplifier technology to create Class-FD (Full Range Class-D)
ICEpower amplifiers that deliver superior performance and sound quality in car entertainment. Combining the unsurpassed efficiency of Class-D amps with the ultra-clean sound of Class-AB amplifiers, COM (Controlled
Oscillation Modulation) technology not only eliminates unnecessary sensitivity to imperfect power supplies [1]—it compares the amplified
PWM (Pulse Width Modulation) signal with the original input signal [2], compensating for any variance and lowering distortion in the process.
PRS-D1100M
Class-D Mono Amplifier
MECC (Multivariable Enhanced Cascade Control) compensating for load-dependent frequency response, improving this response as this system receives analog signals from the output filter [3]. The result is truer fidelity featuring tight bass with minimal lag effect; crisp, airy mids and highs; and unsurpassed specifications contributing to qualities that outperform those of other premium-quality amplifiers.
Input signal
PWM signal
Amplified
PWM signal
Output signal
Class-A
Class-AB
Class-FD
ICEpower
Double loop compensation
Class-D
Single loop compensation
Class-D
No compensation
Efficiency
1200 W MAX.
16
• Normal mode: 400 W × 1 (4 Ω)/600 W × 1 (2 Ω)
(continuous power)
• Hi-current mode: 150 W × 1 (4 Ω)/300 W × 1
(2 Ω)/600 W × 1 (1 Ω) (continuous power)
• 800 W × 1 (4 Ω)/1 200 W × 1 (1 Ω, 2 Ω) (max. power)
• Variable LPF (40 Hz to 240 Hz, –18 dB/oct.)
• Input level control (400 mV to 6.5 V)
• Low load impedance capability (1 ohm to 8 ohm)
• Gold-plated RCA input and output terminals
• Gold-plated screw-type speaker terminals
• Gold-plated large screw-type power/ground terminals
• All terminals placed on one side
• Removable terminal/settings cover
• Speaker level input (1.6 V to 26 V)
• Speaker line input turn-on sensor
• Bass Boost Remote (50 Hz, 0/+6/+9/+12 dB)
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
• Subsonic filter (20 Hz, –18 dB/oct.)
• SYNC control
• PWM regulated power supply with MOSFET switching
• High-performance balanced isolator input circuit
• High-efficiency MOSFET output section
• MASS (Multiple Amplifier Synchronization System)
• Aluminum die-cast heatsink
TS-C171PRS
Rear view
TS-C171PRS
17 cm Packaged Component Speaker System
200 W MAX.
• 17 cm woofer
• Shallow mount adapters included
Common Features
• 3-layer aramid fiber with IMPP composite cone
• High density micro fiber surround for smoother response
• Short voice coil & wide magnetic field design for symmetric & linear cone motion
• Dual OFC short ring for reduced distortion
TS-C131PRS
13 cm Packaged Component Speaker System
150 W MAX.
• 13 cm woofer
• Aluminum die-cast bottom hold one-piece rigid chassis
• Aluminum die-cast center plug
• 28 mm lightweight soft-dome tweeter
• Cancel magnet design for extremely high density magnetic field
• Rear chamber for lower crossover frequency
• Aluminum die-cast tweeter chassis
• Surface (angled), flush or invisible tweeter mounting kit
• Audiophile-grade outboard crossover network included with –12 dB/oct. LPF/HPF
• Protection circuit and 3-step tweeter level adjustment
• Gold-plated screw-type terminals
TS-C171PRS/TS-C131PRS
Tweeter Specifications
• Dimensions (W × H × D):
ø55 mm × 27.1 mm (surface mount)
• Mounting depth: 12.2 mm
• Cut-out dimensions: ø47 mm
* See page 35 for woofer dimensions.
PRS Speakers
TS-C171PRS TS-C131PRS TS-M171PRS TS-S101PRS TS-T031PRS
Pioneer advances the proud heritage of its IASCA (International Auto
Sound Challenge Association) award-winning Premier Reference Series.
These speakers’ superior response, linearity and sound directivity improve low- and mid-frequency reproduction, while making highs and lows sound smoother and more open.
PRS Speaker (Tweeter) Cross Section
Protector
Absorbent
Cancel magnet
Aluminum flange and back cabinet
Soft-dome diaphragm
OFC short ring
Back chamber
Main magnet
PRS Speaker (Woofer) Cross Section
3-layer aramid fiber with
IMPP composite cone
Micro fiber surround
Aluminum die-cast center plug
Dual OFC short ring
Aluminum die-cast bottom hold one-piece rigid chassis
Overhung thick plate
Ø1-7/8" (48 mm) large-diameter voice coil
Voice coil with short winding length
Micro Fiber Surround: Maximum Musical Response
The strong, high-density micro fiber material surrounding the woofer of a PRS speaker is very light and low in resistance and internal loss characteristics. This enhances linearity of the short winding length of the voice coil, thereby optimizing efficiency. Moreover, micro fiber doesn’t stretch so it does a better job than other materials to control vibration and enables higher power input. The result is faster response and more accurate bass reproduction that allows
0.6
all music to be heard to
0.5
Better sound
Rubber greatest advantage.
0.4
Micro fiber
0.3
Polyester fiber
(polyurethane resin)
0.2
0.1
Urethane
Cloth
0
0 0.2
0.4
0.6
0.8
1.0
1.2
1.4
Specific gravity
Magnified cross section view
2nd-Generation Multilayer Cone: First-Class Sound Reproduction
For the new PRS speakers, Pioneer also developed a multilayer woofer cone in an even better formulation, sandwiching composite foamed
IMPP using interlaced aramid fiber between a woven carbon-blended aramid fiber layer and a glass fiber layer. This rigid cone structure provides impeccable midrange frequency reproduction and overall sound quality. The cone material is also supremely light and uniform in its physical properties because it is made without adhesives using an advanced injection molding process.
2.50E+04
Better sound
Aramid fiber layer
2.00E+04 New PRS speakers
1.50E+04
1st-generation
Composite foamed IMPP using interlaced aramid fiber
1.00E+04
0.50E+04
Conventional material
0.00E+04
0.01
0.1
Glass fiber layer
Internal loss
Magnified cross section view Physical properties of cone materials
17
P o w e r A m p l i f i e r s
P O W E R T O O U T P E R F O R M
Impact immortalizes music. Pioneer drives its power to greater extremes through amplifiers with the range to process signals with digital precision along their advanced circuit paths, across the spectrum of sound, down to subwoofers-level depths, smoothly maintaining the pure integrity of the original sound all the way.
GM-7300M
18
GM-7300M
Mono Amplifier
800 W MAX.
• 250 W × 1 (4 Ω)/360 W × 1 (2 Ω) (continuous power)
• 500 W × 1 (4 Ω)/800 W × 1 (2 Ω) (max. power)
• Variable LPF (40 Hz to 240 Hz, –12 dB/oct.)
• High-voltage input level control (400 mV to 6.5 V)
• Input level/gain control
• Low load impedance capability (2 ohm to 8 ohm)
• RCA input terminals
• Screw-type speaker terminals
• Large screw-type power/ground terminals
• Speaker level input (1.6 V to 26 V)
• Bass Boost (50 Hz, 0 dB/+6 dB/+12 dB)
• PWM regulated power supply with MOSFET switching
• High-performance balanced isolator circuit
• Black heatsink with aluminum plate
GM-4300F
GM-6300F
4-Channel Bridgeable Power Amplifier
600 W MAX.
GM-4300F
4-Channel Bridgeable Power Amplifier
400 W MAX.
• 60 W × 4 (4 Ω)/150 W × 2 (4 Ω)/75 W × 4 (2 Ω)
(continuous power)
• 120 W × 4 (4 Ω)/300 W × 2 (4 Ω) (max. power)
• 40 W × 4 (4 Ω)/100 W × 2 (4 Ω)/50 W × 4 (2 Ω)
(continuous power)
• 80 W × 4 (4 Ω)/200 W × 2 (4 Ω) (max. power)
Common Features
• Bridgeable 2/3/4-channel capability
• LPF/HPF (80 Hz, –12 dB/oct.) for A and B channels
• High-voltage input level control (400 mV to 6.5 V)
• Input level/gain control
• Low load impedance capability (2 ohm to 8 ohm)
• RCA input and output terminals*
• Screw-type speaker terminals
• Large screw-type power/ground terminals
• Speaker level input (1.6 V to 26 V)
• PWM regulated power supply with MOSFET switching
• High-performance balanced isolator circuit
• Black heatsink with aluminum plate
* Output for A-channel
GM-3300T
GM-5300T
2-Channel Bridgeable Power Amplifier
760 W MAX.
GM-3300T
2-Channel Bridgeable Power Amplifier
300 W MAX.
• 125 W × 2 (4 Ω)/380 W × 1 (4 Ω)/190 W × 2 (2 Ω)
(continuous power)
• 250 W × 2 (4 Ω)/760 W × 1 (4 Ω) (max. power)
• Bass Boost (50 Hz, 0 dB/+6 dB/+12 dB)
• PWM regulated power supply with MOSFET switching
• 60 W × 2 (4 Ω)/150 W × 1 (4 Ω)/75 W × 2 (2 Ω)
(continuous power)
• 120 W × 2 (4 Ω)/300 W × 1 (4 Ω) (max. power)
Common Features
• Bridgeable 1/2/3-channel capability
• LPF (80 Hz, –12 dB/oct.)
• High-voltage input level control (400 mV to 6.5 V)
• Input level/gain control
• Low load impedance capability (2 ohm to 8 ohm)
• RCA input terminals
• Screw-type speaker terminals
• Large screw-type power/ground terminals
• Speaker level input (1.6 V to 26 V)
• High-performance balanced isolator circuit
• Black heatsink with aluminum plate
GM-D510M
Class-D Mono Amplifier
1000 W MAX.
• 300 W × 1 (4 Ω)/500 W × 1 (2 Ω)
(continuous power)
• 600 W × 1 (4 Ω)/1 000 W × 1 (2 Ω)
(max. power)
• Variable LPF (40 Hz to 240 Hz, –24 dB/oct.)
• High-voltage input level control
(125 mV to 6.5V)
• Bass level control (–22 dB to +12 dB)
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
• Low load impedance capability (2 ohm to 8 ohm)
• RCA input terminals
• Large screw-type power/ground terminals
• PWM regulated power supply with MOSFET switching
• High-performance balanced isolator circuit
• High-efficiency MOSFET output section
• Aluminum die-cast heatsink
Amplifier & Speaker Connection Chart
앪
: DVC parallel connection
•
: DVC series connection
■
: Single voice coil
Amplifier Subwoofer
Product No. Channel
Load
Impedance
GM-6300F
GM-4300F
GM-5300T
4-ch.
4-ch.
2-ch.
1-ch.
4 Ω 60 W × 4
앪
•
앪 앪
2 pc.
•
앪
2
•
앪
2
•
앪 ■ ■ ■ ■ ■ ■
2 Ω 75 W × 4 2 pc.
•
앪
4 Ω ×
•
•
2
앪 앪
•
2
앪
2
•
•
앪
2
•
2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para.
•
앪 ■ ■ ■ ■ NA ■
4 Ω
2 Ω
40 W × 4
앪
50 W × 4 2 pc.
•
앪
•
•
앪 앪
2
2
앪
•
앪
2
•
•
앪
2
•
앪 ■ ■ ■ ■ ■ ■
•
2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para.
4 Ω ×
4 Ω
2 Ω
4 Ω
125 W × 2
앪
•
앪 앪
2
앪
2
•
앪 앪
2
앪
2
190 W × 2 2 pc.
•
앪
•
2
앪
•
380 W × 1
앪
•
앪
NA 2
•
•
앪 앪
•
앪
2
•
앪
2
•
•
앪
앪
■
■
■
■
■
■
■
■
■
■
■
■
•
2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para.
앪
NA NA NA NA NA NA
GM-3300T 2-ch.
GM-7300M 1-ch.
PRS-D4100F 4-ch.
4 Ω
2 Ω
60 W × 2
75 W × 2
앪
2 pc.
•
앪
•
•
앪 앪
2
2
앪
•
앪
2
•
•
앪
2
•
앪 ■ ■ ■ ■ ■ ■
•
2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para.
4 Ω ×
4 Ω 250 W × 1
앪
•
앪 앪
2
앪
2
•
앪 앪
2
앪
2
•
앪
2
•
앪
2
•
앪 ■
•
앪 ■
■
■
■
■
■ NA ■
■ NA NA
2 Ω
4 Ω
360 W × 1 2 pc.
•
앪
•
2
앪
NA
•
75 W × 4
앪
•
앪 앪
2
앪
2
•
앪
2
•
2 pc. Para. 2 pc. Para. 2 pc. Para. NA NA NA
•
앪 ■ ■ ■ ■ ■ ■
2 Ω 150 W × 4 2 pc.
•
앪
4 Ω ×
•
•
2
앪 앪
앪
•
2
앪
2
•
•
앪
2
•
2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para.
•
앪 ■ ■ ■ NA NA NA
PRS-D2100T 2-ch. 4 Ω
2 Ω
150 W 2
앪
300 W × 2 2 pc.
•
앪
•
•
앪 앪
2
2
앪
•
앪
2
•
•
앪
2
•
앪 ■ ■ ■ ■ ■ ■
•
2 pc. Para. 2 pc. Para. 2 pc. Para. 2 pc. Para. NA 2 pc. Para.
1-ch.
PRS-D1100M 1-ch.
4 Ω
4 Ω
2 Ω
600 W × 1
400 W × 1
NA
NA
2 pc.
2 pc.
•
•
앪
앪
NA 2
NA 2
앪
앪
2
앪
•
앪
2
•
앪
NA NA NA NA NA NA
앪
NA NA NA NA NA NA
600 W × 1 2 pc.
•
앪
NA 2
앪
NA NA NA 2 NA NA
2 pc. = 2-piece Para. = Parallel NA = Not available
19
S u b w o o f e r s
D E E P E N T H E D R A M A
The pride of a winner takes world-leading DNA
The quest for new thresholds of listening intensity rarely reaches a wholly satisfying result. But Pioneer makes a habit of establishing new standards in the field. Case in point: Pioneer Champion Series subwoofers inherit the high-power handling technology of the sub that broke the 180 dB Sound Pressure Level barrier to win at the 2006 IASCA IdBL World Finals.
• 2006 World Record in Ultimate 5+ (178.3 dB)
• 2006 World Record in Ultimate 2 (176.4 dB)
• 2006 Winner for Extreme Cup
• 2006 World Record in Super Modify 5001 up (181.4 dB)
• 2006 Port Wars Champion (181.5 dB)
• 2006 Super Port Wars Champion (181.5 dB)
• 2006 Bass Olympics Champion (181.3 dB)
• 2006 B&K Champion (179.6 dB)
• 2006 dB5 Champion (166.4 dB)
• 2006 World Record in Ultimate 3 (180.3 dB)
• 2006 World Record in Ultimate 1 (177.2 dB)
The pride of a winner takes world-leading DNA
TS-W8102SPL
Component SPL Subwoofers
TS-W8102SPL
38 cm (15") Component Competition-Level SPL Subwoofer
8000 W MAX.
• Massive triple-stack magnet assembly
(11 kg: 3 700 g × 3/390 oz.: 8 lbs. 20 oz. × 3)
Common Features
• Composite IMPP cone using interlaced carbon fiber*
• Carbon cloth/foamed acrylic polymer/glass cloth 3-layer rigid dust cap
• Wide-roll, woven aramid fiber radial rubber surround*
• Overhung surround design*
TS-W5102SPL
30 cm (12") Component Competition-Level SPL Subwoofer
6000 W MAX.
• Massive triple-stack magnet assembly
(9 kg: 3 000 g × 3/320 oz.: 6 lbs. 10 oz. × 3)
• High-power handling ceramic-coated voice coil wire*
• Dual 76 mm (3"), high inductance, 6-layer, long voice coils (DVC)
(2 × 2 Ω)
• Titanium voice coil bobbin
• Dual aramid damper with woven tinsel wire and damper ring
• Precision dual aramid dampers
• Huge back plate and extended pole yoke with vented pole
• Huge 30 mm (1.2") thick top plate
• ADMG (Aero-Dynamic Magnetic Gap) design
• Aluminum die-cast one-piece rigid basket with bottom hold design
• 8-gauge wire terminal
* Patent pending
20
SPL (Sound Pressure Level) Subwoofer
TS-W8102SPL
To generate resounding bass, the TS-W8102SPL and TS-W5102SPL subwoofers handle high-power input and extreme sound pressure levels with absolute assurance, thanks to design and construction durable enough to deliver consistently true, rock-steady performance, even at extra-high volume throughout marathon listening sessions.
TS-W5102SPL Cross Section
76 mm pure titanium voice coil former*
Extra-strong dust cap
TS-W5102SPL
Dual Ceramic-Coated Voice Coils
Excess heat generated by subwoofers can compromise electricalhandling performance, but Pioneer uses ceramic-coated voice coil to double the capacity of its subwoofers
Adhesive layer to handle input power without shortcircuiting. No wonder the Pioneer
Ceramic thermal insulation
Electrical insulation
TS-W5102SPL beat the competition at
2005 and 2006 dB Drag Racing events.
Copper wire
Extended pole yoke
Composite IMPP cone using interlaced carbon fiber*
Wide-roll, woven aramid fiber radial rubber surround*
Super aramid fiber damper*
Precision dual damper
Overhung surround
(US6782114B2)
Ceramic-coated voice coils*
Supporting wire*
Triple stack magnets
* Patent pending
Spider ring
Vented damper holder
30 mm thick top plate
ADMG (Aero-Dynamic
Magnetic Gap)
Bottom hold design
Extra-Strong Dust Cap Core with Foamed Acrylic Polymer
Dust caps on the TS-W8102SPL and TS-W5102SPL subwoofers feature a light, durable heat-resistant foamed acrylic polymer core (between carbon-fiber and glass cloth layers) that is up to about 36 times as strong as conventional materials.
Carbon cloth
The result: greater capacity for
Foamed acrylic polymer extra sound pressure, stability
Glass cloth and power in bass reproduction.
10 m m
TS-W3001D4
30 cm (12") Component Subwoofer
3000 W MAX.
• Double stack high power magnets (3 110 g/110 oz.)
• Spoke grille compatible (UD-G307)
TS-W2501D4
25 cm (10") Component Subwoofer
2500 W MAX.
• Double stack high power magnets (2 400 g/85 oz.)
• Spoke grille compatible (UD-G257)
Common Features
• Composite IMPP cone using interlaced carbon fiber
• Wide-roll, 3-layer fiber woven aramid radial surround with honeycomb cloth
• Phenol coated glass cloth former
• Air suspension system
• Dual 4 Ω, 4-layer, long voice coil (2 Ω or 8 Ω)
• Extended and vented pole yoke
• Thick 24 mm (1") top plate
• Aluminum die-cast basket & magnet cover
• Integrated single-sided silver binding posts
• One piece, ABS silver gasket
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
Air Suspension System
TS-W3001D4 TS-W2501D4 TS-SW1241D TS-SW1041D TS-SW841D
For its revolutionary 3.25-inch-deep subwoofer, Pioneer created an air suspension system effective within a 70 %-smaller-than-previous enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear, powerful, wide-ranging bass response. The subwoofer’s dual-cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with “spider” structures to keep
Air Suspension System for
Smaller Enclosure
70 % Smaller
the voice coil aligned.
Approximately 70 % smaller than previous enclosure.
Bottom Hold Design Aluminum Die-Cast
One-Piece Chassis
TS-C171PRS TS-C131PRS TS-W8102SPL TS-W5102SPL
Although aluminum die-cast baskets have been around for many years, not all are created equal. Whereas other manufacturers purchase off-the-shelf designs, Pioneer’s baskets were designed in-house, from scratch. Die-cast baskets also provide excellent damping characteristics, to attenuate vibration quickly and prevent distortion.
Unlike other manufacturers’ designs, Pioneer’s basket cradles the bottom plate and motor assembly. During high SPL levels there is a tremendous amount of pressure placed on the motor assembly.
By supporting (cradling) the motor assembly any unwanted flexing or vibrations which can lead to energy loss are prevented.
Vibration Attenuation (Damping) Comparison
Impulse response
40.0
20 Avg 0 % Ovlp
Aluminum die-cast basket
Hann
–40.0
Fxd XY
Steel basket
Sec.
200 m
–40
–50
–60
–70
–80
–90
20
Improved Chassis Rigidness
Reduced backward motion
70 120
Conventional basket
Bottom hold basket
170 Hz
Carbon Fiber IMPP Cone
TS-W8102SPL TS-W5102SPL TS-W3001D4 TS-W2501D4
Preventing cone failure at high pressure levels requires an extremely rigid yet lightweight cone. So Pioneer developed a new patent-pending
IMPP cone using a proprietary composite blend of long carbon fibers and injection molded polypropylene. These materials were chosen for their extraordinary strength and lightweight characteristics. The long carbon fibers interlace together to form an incredibly resilient fiber weave, providing strength and rigidity for powerful bass.
Microscopic Cross Section View
Regular IMPP cone Long carbon fiber reinforced IMPP cone
Woven Aramid Fiber Radial Surround
TS-W8102SPL TS-W5102SPL TS-W3001D4 TS-W2501D4
The TS-W8102SPL, TS-W5102SPL, TS-W3001D4 and TS-W2501D4 incorporate a patent-pending Woven Aramid Fiber Radial Surround which improves power handling and reduces distortion. Similar to a radial tire, the surround is constructed of three layers—two consisting of rubber and one of interwoven aramid fiber. The aramid fiber layer is designed with a “honeycomb” weave, which evenly distributes strength throughout the surround material, eliminating any weak points of surround and improving high-power capability. The result is an extremely durable and resilient surround that resists “puckering”
(distortion often produced under extreme power conditions).
Benefits of Woven Aramid Fiber Radial Surround
• Improved power handling capability • Reduced distortion (anti-puckering design)
• Improved linear excursion • Louder, more accurate bass
The three layers are formed under a high-pressure, high-temperature process. The result: an extremely durable and high-performance surround.
21
S u b w o o f e r s
Dual Voice Coil Type Subwoofers
The pride of a winner takes world-leading DNA
TS-W307D2
30 cm (12") Component Subwoofer (2 Ω Dual Voice Coil Type)
1200 W MAX.
TS-W307D4
30 cm (12") Component Subwoofer (4 Ω Dual Voice Coil Type)
1200 W MAX.
Common Features
• Composite IMPP cone using interlaced aramid fiber
• 3-layer, fiber woven radial surround
• Single large conex damper with damper ring
• Dual 4-layer, long voice coils (DVC) (2 × 2 Ω: TS-W307D2/
2 × 4 Ω: TS-W307D4)
• ø55 mm (2-3/16") phenol coated glass cloth voice coil former for higher power handling capabilities
• Double stack high power magnets (2.4 kg/83 oz.)
• Extended and vented pole yoke
• Integrated single-sided silver binding posts
• Spoke grille compatible (UD-G307)
TS-W307D2
TS-W257D2
25 cm (10") Component Subwoofer (2 Ω Dual Voice Coil Type)
1000 W MAX.
TS-W257D4
25 cm (10") Component Subwoofer (4 Ω Dual Voice Coil Type)
1000 W MAX.
Common Features
• Composite IMPP cone using interlaced aramid fiber
• 3-layer, fiber woven radial surround
• Single large conex damper with damper ring
• Dual 4-layer, long voice coils (DVC) (2 × 2 Ω: TS-W257D2/
2 × 4 Ω: TS-W257D4)
• ø48 mm (2") phenol coated glass cloth voice coil former for higher power handling capabilities
• Double stack high power magnets (2.1 kg/74 oz.)
• Extended and vented pole yoke
• Integrated single-sided silver binding posts
• Spoke grille compatible (UD-G257)
TS-W257D2
22
Integrated Single-Sided Silver Binding Posts
TS-W3001D4
TS-W257D4
TS-W2501D4 TS-W307D2 TS-W307D4 TS-W257D2
Incorporate 2 Ω Dual Voice Coil instead of 4 Ω SVC to expand connective application.
Single side
Compatible
Cover Wire
4 Ω or
1 Ω
D2 Type (2 Ω Dual Voice Coil)
UD-G307/UD-G257
Optional Spoke Grille
Pioneer optional spoke grilles protect cone surface and enhance appearance of the subwoofers.
• Spoke grille for the TS-W3001D4, TS-W2501D4, TS-W307D2, TS-W307D4, TS-W257D2, TS-W257D4,
TS-W307F, TS-W257F, TS-W301R, TS-W251R and TS-W12PRS.
Connection & Wiring
(for Dual Voice Coil Type Subwoofers)
TS-W3001D4
TS-W257D4
TS-W2501D4 TS-W307D2 TS-W307D4 TS-W257D2
1 Ω or 2 Ω or 4 Ω
Bridged mono
(for 2 subwoofers)
2 Ω or 4 Ω Stereo
1 Ω or 2 Ω or 4 Ω
Bridged mono
2 Ω or 4 Ω or 8 Ω
8 Ω (D4)
4 Ω (D2)
2 Ω (D4)
2 Ω or 4 Ω
4 Ω (D2)
2 Ω (D4)
1 Ω or 2 Ω or 4 Ω
4 Ω (D2)
2 Ω (D4)
1 Ω (D2)
UD-G307 with TS-W307D2
Free-Air Type Subwoofers
TS-W307F
30 cm (12") Component Subwoofer (Free-Air Type)
900 W MAX.
• Spoke grille compatible (UD-G307)
• 48 mm (2") aluminum voice coil former
TS-W257F
25 cm (10") Component Subwoofer (Free-Air Type)
700 W MAX.
• Spoke grille compatible (UD-G257)
• 40 mm (1-1/2") aluminum voice coil former
Common Features
• Composite IMPP cone using interlaced aramid fiber
• 2-layer, copper round wire long voice coil
• Single conex damper with damper ring
• Dual-layer foam urethane surround
• Large magnet and high-power motor assembly
• Tall surround and large cone surface
• Extended excursion design
• Long voice coil design
• Extended and vented pole yoke
• Best tuned parameters
TS-W307F
TS-W257F
Component Subwoofers
TS-W301R
30 cm (12") Component Subwoofer
• Spoke grille compatible (UD-G307)
800 W MAX.
TS-W251R
25 cm (10") Component Subwoofer
• Spoke grille compatible (UD-G257)
600 W MAX.
TS-W301R
Common Features
• Blue IMPP composite cone
• 4-layer, long voice coil
• Single nomex damper
• Extended excursion design
• Extended and vented pole yoke
• Best tuned parameters
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
Subwoofer Enclosures
To have tighter control of bass power, an enclosure system is the perfect solution. Enclosure subwoofers are designed for use in a customdesigned sealed, vented or bandpass enclosure, the size of which is determined by specialized software. The bass response is tight, accurate,
SEALED ENCLOSURES
From a purely musical standpoint, the sealed enclosure type is as popular as ever. This box type is capable of handling large amounts of power and, in turn, fairly high SPL levels “in car”. Size always plays a key role in application and the sealed enclosure controlled and consistent, since it’s not affected by the volume of objects in the car boot. You can put together high-performance systems featuring superb low-frequency reproduction.
variety is excellent for small box applications.
Power, however, is required to achieve above average SPL levels. From a purely engineering standpoint, the sealed box lends a “simpler is better” approach to subwoofer application.
Larger
Recommended
Smaller
VENTED ENCLOSURES (BASS REFLEX)
The vented enclosure variant is a balance between several factors. Most notable about vented boxes is the increase in box volume over the sealed variation.
Because the vent is considered to be a secondary
“output source”, the deeper bass frequencies can be extended. While the distortion level above the tuning frequency is quite low, things can get pretty dirty if the enclosure is forced to play below this area.
4TH-ORDER BAND PASS ENCLOSURES
The 4th-order band pass enclosure is basically a sealed enclosure with the addition of a ported enclosure in front of the driver, which acts as an acoustical filter. The resulting system radiates sound in a limited bandwidth. Band pass enclosures usually demonstrate a higher sensitivity compared to sealed enclosures. The disadvantage, however, is that it uses more trunk space. 4th-order band pass systems are a bit more flexible in design than sealed or bass reflex
Efficiency and easily obtained lower frequencies would be the biggest benefits of this design. From a purely engineering standpoint, three key elements have to be in “sync” in order for the enclosure to work at its targeted area—box + speaker + vent.
While more complex than the sealed variation, the vented enclosure has been a very popular approach to car audio low-frequency reproduction.
enclosures, due to the ability to change many parts of the enclosure as front and back volume, as well as the port length. The benefit of this is that the frequency response as well as the sensitivity of the system can be defined more freely compared to sealed or bass reflex enclosures. Nevertheless, a very decent bass reproduction can be achieved with a well-tuned system.
Port
Sealed chamber Ported chamber
Port
Larger
Recommended
Smaller
Larger
Recommended
Smaller
23
S u b w o o f e r s
Shallow-Type Subwoofers
TS-SW1241D
30 cm (12") Component Subwoofer
1400 W MAX.
Component Enclosed Subwoofers
TS-WX301
30 cm Bass-Reflex Subwoofer
800 W MAX.
• Blue IMPP composite cone
• Bass-reflex design
• 37 liters wooden enclosure
• 4-layer, long voice coil
• Single nomex damper
• Extended excursion design
• Extended and vented pole yoke
• Best tuned parameters
82 mm
TS-SW1241D
TS-SW1041D
25 cm (10") Component Subwoofer
1000 W MAX.
TS-SW841D
20 cm (8") Component Subwoofer
500 W MAX.
Common Features
• Double-cone structure with air-suspension control system
• Reinforced cone using C-shaped nodes structure
• Composite IMPP double cone woofer using interlaced carbon and ultra long glass fiber
• 3-layer fiber woven radial surround with M-shape cross-section
• 4-layer, long voice coil
• Glass cloth voice coil bobbin
• High-energy strontium magnet
• Aluminum dust cap
• T-pole yoke design
• Extended and vented pole yoke
• Rubber gasket
• Cast aluminum basket with fin-shaped design
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
24
Shallow-Type Subwoofers
TS-SW1241D TS-SW1041D
With enhanced maximum power and handling shallow dimensions,
TS-SW subwoofers are more versatile than ever. The Full (30 cm) and
Regular (25 cm) sizes can be installed behind and under seats, and the
Compact (20 cm) size can even be mounted on rear sidewalls and trays of smaller cars.
Full-size
30 cm
(12")
Full-size pickup trucks etc
Behind seats
Rear sidewall
Regular
Under seats
Rear tray
25 cm
(10")
Standard-size pickup trucks etc
Compact
20 cm
(8")
SUV Sedan Compact vehicles
Air-Suspension
Control System
Thanks to Pioneer’s unique
Air-Suspension Control System,
TS-SW subwoofers offer deep, rich bass in a shallow, compact form. Air is trapped within the composite IMPP™ double cone, between the main cone and the drive cone behind it.
35
Frequency Changes Before and After Reliability Test
30
33 Hz
30 Hz
Subwoofer with Air-Suspension
Control System
28 Hz
25
Conventional subwoofers
Before test
24 Hz
After test
20
TS-SW841D
The pressure of this air varies as the cones move back and forth, resulting in smoother, more precise linearity. The trapped air behaves like a spring, eliminating the need for a conventional spider structure, so the unit can be made shallow enough to fit in a tight space. Inside the enclosure, a drive cone deflects air pressure and a fin-shaped basket smoothly directs air sideways. This makes bass output remarkably stable, despite these units’ compact size. The system also enhances durability, as the subwoofers are subjected to smaller frequency changes (and less wear and tear) than conventional subwoofers.
TS-SW1241D Cross Section
Composite IMPP double cone using interlaced carbon and ultra long glass fiber
Aluminum dust cap
4-layer long voice coil
C-shaped nodes*
Surround with
M-shape cross-section*
Air-suspension control system*
Cast aluminum basket with fin-shaped design
High-energy strontium magnet
T-pole yoke design*
Spring compression wire terminals
* Patent pending
TS-WX11A
13 cm × 21 cm Sealed Active Subwoofer
150 W MAX.*
* Output Power
• Built-in MOSFET 150 W max. monaural amplifier
• 13 cm × 21 cm aluminum and IMPP composite cone woofer with strontium magnet
• Wired remote control (input level, crossover frequency, phase)
• Speaker and RCA level inputs
• Built-in variable LPF (50 Hz to 125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
TS-WX22A
20 cm Sealed Active Subwoofer
150 W MAX.*
* Output Power
• Built-in MOSFET 150 W max. monaural amplifier
• 20 cm IMPP composite cone woofer with strontium magnet
• Wired remote control (input level, crossover frequency, phase)
• Speaker and RCA level inputs
• Built-in variable LPF (50 Hz to 125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
Can be installed at rear luggage room, under seat, etc.
Rear terminals
TS-WX206A
20 cm Bandpass Active Subwoofer
150 W MAX.*
* Output Power
• Built-in MOSFET 150 W max. monaural amplifier
• 20 cm IMPP composite cone woofer with strontium magnet
• Large dual port bandpass design for rich and powerful bass
• Speaker and RCA level inputs
• Input level control/phase switch
• Built-in variable LPF (50 Hz to 125 Hz, –12 dB/oct.)
• Aluminum die-cast heatsink
Sound quality adjustment knobs
25
S p e a k e r s
S P E A K T H E T R U T H
The magic of wide-open sound coming from light, compact speakers is no mystery at Pioneer—always evolving, yet true to its origins as a speaker innovator. Smooth mid- to high-frequency transitions and midrange response, expansive soundstage, minimal distortion and incomparable expertise offer clues into our assurance of absolute output fidelity.
TS-D691S
TS-D161S
TS-D Series Speakers
TS-D691S
6" × 9" 2-Way Speaker
350 W MAX.
• 6" × 9" (16 cm × 24 cm) woofer/28 mm dome tweeter
• Top/bottom mount
TS-D161S
16 cm 2-Way Speaker
260 W MAX.
• 16 cm woofer/28 mm dome tweeter
Common Features
• Dual-layer KEVLAR® Brand Fiber* with Rigilite™ IMPP composite cone woofer
• Single conex damper
• Copper ring
• Extended pole yoke design
• Butyl rubber surround for smoother response
• Glass-imide voice coil bobbin
• Lightweight balanced dome tweeter with neodymium magnet
• Wave guides for dispersion control
• Rear chamber for lower crossover frequency
• Built-in crossover network: LPF; –12 dB/oct. (for woofer)/
HPF; –12 dB/oct. (for tweeter)
• Newly-designed full-depth basket boasting much higher compressive strength and better damping
• Full-depth basket for rich bass response
* DuPont and/or DU PONT-TORAY CO., LTD. produce KEVLAR® brand fiber. DuPont™ and KEVLAR® are trademarks and registered trademarks of DuPont or its affiliates and are used under license by Pioneer.
26
TS-E Series Speakers
TS-E6996
6" × 9" 3-Way Speaker
360 W MAX.
• 6" × 9" (16 cm × 24 cm) woofer/
43 mm midrange/12 mm tweeter
• KEVLAR® Brand Fiber/pulp composite cone woofer
• Butyl rubber surround for smoother response
• Heat-resistant long voice coil
• Pure magnesium balanced dome midrange with neodymium magnet
• Dome tweeter
• Full-depth basket for longer excursion and richer bass
TS-E2096
20 cm 3-Way Speaker
360 W MAX.
• 20 m woofer/43 mm midrange/12 mm tweeter
TS-E1796
17 cm 3-Way Speaker
220 W MAX.
• 17 cm woofer/30 mm midrange/10 mm tweeter
TS-E1396
13 cm 3-Way Speaker
160 W MAX.
• 13 cm woofer/25 mm midrange/10 mm tweeter
Common Features
• KEVLAR® Brand Fiber/pulp composite cone woofer
• Butyl rubber surround for smoother response
• Heat-resistant long voice coil
• Pure magnesium balanced dome midrange with neodymium magnet
• Dome tweeter
• Full-depth basket for longer excursion and richer bass
TS-E2096
TS-E1076
10 cm 2-Way Speaker
110 W MAX.
• 10 cm woofer/25 mm tweeter
• KEVLAR® Brand Fiber/pulp composite cone woofer
• Butyl rubber surround for smoother response
• Heat-resistant long voice coil
• Pure magnesium balanced dome tweeter with neodymium magnet
• Round/Square compatible frame
TS-E1695
16 cm 3-Way Speaker
220 W MAX.
• 16 cm woofer/30 mm dome midrange/
10 mm dome tweeter
• 3D magnesium hybrid cone woofer
• Pure titanium dome midrange with ultra-slim neodymium magnet and magnetic fluid
• Triangular butyl rubber surround for smoother response
• GM tabs for 16 cm/17 cm compatibility
Packaged Component Speaker Systems
TS-C160R
16 cm Packaged Component Speaker System
250 W MAX.
TS-C130R
13 cm Packaged Component Speaker System
180 W MAX.
• 16 cm woofer/25 mm soft-dome tweeter
• CCAW heat-resistant long voice coil
• Die-cast aluminum full-depth basket for rich bass response with removable GM tabs
Common Features
• KEVLAR® Brand Fiber/pulp composite cone woofer
• Projected pole yoke design
• Butyl rubber surround for smoother response
• Glass-imide voice coil bobbin with copper film
• Aluminum dust cap
• VCCS (Voice Coil Cooling System)
• Large-diameter conex damper
• Laminated polyester fiber soft-dome tweeter with neodymium magnet and magnetic fluid
• 13 cm woofer/25 mm soft-dome tweeter
• Heat-resistant long voice coil
• Die-cast aluminum basket
• Flush swivel mounting cup
• Slant spacer
• Outboard screw-type crossover
(LPF; –12 dB/oct., HPF; –12 dB/oct.)
• Tweeter level control (0 dB, –3 dB)
• Heat-reactive poly-switch for tweeter protection
• Acoustically inert die-cast aluminum frame
• Gold-plated binding post
TS-C160R
TS-C160R/TS-C130R Tweeter Specifications
• Dimensions (W × H × D): 42 mm × 38 mm × 41 mm (surface mount)
• Mounting depth: 19.6 mm • Cut-out dimensions: ø41 mm
* See page 35 for woofer dimensions.
TS-C1653
16 cm Packaged Component Speaker System
150 W MAX.
• 16 cm woofer/23 mm tweeter
• 16 cm/GM 17 cm compatible frame
TS-C1353
13 cm Packaged Component Speaker System
150 W MAX.
• 13 cm woofer/23 mm tweeter
• Large-sized DIN frame
Common Features
• Foamed IMPP composite cone woofer
• Aromatic polyamide fiber soft-dome tweeter
• Glass-imide voice coil bobbin
• CCAW long voice coil
• Butyl rubber surround
• High-performance neodymium magnet (tweeter)
• Flush swivel mounting cup
• Slant spacer
• Outboard screw-type crossover
(LPF: –6 dB/oct., HPF: –18 dB/oct.)
• Aluminum electrolytic capacitor
• Ferrite core choke coil
• Heat-reactive poly-switch for tweeter protection
TS-C1625
16 cm High-Grade Packaged Component Speaker System
220 W MAX.
TS-C1653
TS-C1653/TS-C1353 Tweeter Specifications
• Mounting depth: 18.6 mm • Cut-out dimensions: ø39 mm
* See page 35 for woofer dimensions.
TS-C1602
16 cm Packaged Component
Speaker System
150 W MAX.
• 16 cm woofer/13 mm tweeter
• 2-way surface mounting capabilities (tweeter)
TS-C1002
10 cm Packaged Component
Speaker System
150 W MAX.
• 10 cm midrange/13 mm tweeter
• 16 cm woofer/27 mm tweeter
• 16 cm/GM 17 cm compatible frame
• 3D magnesium hybrid cone woofer with slitted bullet shape equalizer
• Pure titanium dome tweeter
• Triangular butyl rubber surround
• High-performance neodymium magnet
(tweeter)
• Flush swivel mounting cup and slant spacer
• Outboard screw-type crossover
(LPF/HPF: –12 dB/oct.)
• Tweeter level control (0 dB, –3 dB)
TS-C1625 Tweeter Specifications
• Dimensions (W × H × D): 42 mm × 38 mm × 41 mm (surface mount) • Mounting depth: 20 mm
• Cut-out dimensions: ø41 mm
* See page 35 for woofer dimensions.
Common Features
• HR™ (Hydro-Resistant) cone woofer/ midrange
• PEI (poly-ether imide) dome tweeter with magnetic fluid
TS-C1602
• In-line passive crossover included
(HPF, –12 dB/oct.)
• Aluminum short ring
• Flush and surface mounting capabilities
(tweeter)
TS-C1602/TS-C1002 Tweeter Specifications
• Dimensions (W × H × D): ø49 mm × 21 mm • Cut-out dimensions: ø37 mm
* See page 35 for woofer dimensions.
27
S p e a k e r s
TS-A Series Speakers
TS-A6982S
TS-A6992S
6" × 9" 5-Way Speaker
460 W MAX.
TS-A6982S
6" × 9" 4-Way Speaker
440 W MAX.
• 6" × 9" (16 cm × 24 cm) woofer/46 mm dome midrange/30 mm cone tweeter with neodymium magnet/11 mm dome supertweeter/9 mm dome supertweeter
Common Features
• Carbon graphite IMPP cone woofer using interlaced aramid fiber
• Butyl rubber surround for smoother response
• Glass-imide voice coil former for higher power handling capabilities
• Light weight copper clad aluminum voice coil design
• Light weight balanced dome midrange design with magnetic fluid
• 6" × 9" (16 cm × 24 cm) woofer/46 mm dome midrange/17 mm dome tweeter/11 mm dome supertweeter
• Silver PET film dome supertweeter
• Full depth basket for longer excursion and richer bass
TS-A6972E
TS-A6992S
TS-A6972E
6" × 9" 3-Way Speaker
400 W MAX.
28
TS-A6962E
6" × 9" 3-Way Speaker
300 W MAX.
• Butyl rubber surround for smoother response
• PET cone midrange with urethane surround
• Full depth basket for longer excursion and richer bass
• Cone midrange with urethane surround
• Shallow basket for installation versatility
TS-A6962E
Common Features
• 6" × 9" (16 cm × 24 cm) woofer/57 mm cone midrange/18 mm dome tweeter
• Carbon graphite IMPP cone woofer using interlaced aramid fiber
• Glass-imide voice coil former for higher power handling capabilities
• Silver PET film dome tweeter
TS-A6972S
6" × 9" 3-Way Speaker
300 W MAX.
• 6" × 9" (16 cm × 24 cm) woofer/46 mm dome midrange/17 mm dome tweeter
• Light weight balanced dome midrange design with magnetic fluid
TS-A6962S
6" × 9" 3-Way Speaker
250 W MAX.
• 6" × 9" (16 cm × 24 cm) woofer/57 mm cone midrange/
17 mm dome tweeter
TS-A6871R
6" × 8" 3-Way Speaker
240 W MAX.
• 6" × 8" (16 cm × 20 cm) composite IMPP cone woofer using interlaced aramid fiber
• Glass-imide voice coil bobbin
• 40 mm lightweight balanced dome midrange with neodymium magnet
• 10 mm silver PET film dome tweeter
• Shallow-depth basket for installation versatility
TS-A1682S
16 cm 4-Way Speaker
280 W MAX.
• 16 cm woofer/38 mm dome midrange/
11 mm dome tweeter/9 mm dome tweeter
• Full depth basket for longer excursion and richer bass
TS-A6972S
Common Features
• Carbon graphite IMPP cone woofer using interlaced aramid fiber
• Foamed rubber coated cloth surround
TS-A6962S
• Glass-imide voice coil former for higher power handling capabilities
• Silver PET film dome supertweeter
• Shallow basket for installation versatility
TS-A1672S
16 cm 3-Way Speaker
220 W MAX.
• 16 cm woofer/33 mm dome midrange/
11 mm dome tweeter
• Shallow basket for installation versatility
TS-A1682S
Common Features
• Carbon graphite IMPP cone woofer using interlaced aramid fiber
• Butyl rubber surround for smoother response
TS-A1672S
• Glass-imide voice coil former for higher power handling capabilities
• Silver PET film dome supertweeter
TS-A2511
25 cm 3-Way Speaker
400 W MAX.
TS-A2011
20 cm 3-Way Speaker
350 W MAX.
• 25 cm woofer/66 mm cone midrange/
18 mm dome tweeter
• 20 cm woofer/66 mm cone midrange/
18 mm dome tweeter
TS-A2511
Common Features
• Composite IMPP cone woofer using interlaced aramid fiber
• Butyl rubber surround for smoother response
TS-A2011
• Glass-imide voice coil bobbin for higher power handling capabilities
• PET film cone midrange with magnetic fluid
• PET film dome tweeter
TS-A4672R
4" × 6" 3-Way Speaker
150 W MAX.
• 4" × 6" (10 cm × 16 cm) woofer/23 mm dome midrange with neodymium magnet/10 mm dome tweeter
• Carbon graphite IMPP cone woofer using interlaced aramid fiber
• Foamed rubber coated cloth surround
• Glass-imide voice coil former for higher power handling capabilities
• Light weight balanced dome midrange design with magnetic fluid
• Custom-fit US/European compatible basket design
Composite IMPP Cone with Interlaced Aramid Fiber
TS-W307D2
TS-A6972S
TS-W307D4
TS-A6962S
TS-W257D2
TS-A6871R
TS-W257D4
TS-A1682S
TS-W307F
TS-A1672S
TS-W257F
TS-A2511
TS-A6992S
TS-A2011
TS-A6982S
TS-A4672R
TS-A6972E TS-A6962E
Long aramid fiber
Color pellet
Long aramid fiber
Base polypropylene
Carbon graphite
Microscopic Cross Section View
Skin layer
Long aramid fibers
Regular IMPP cone Carbon Graphite IMPP Cone with Interlaced Aramid Fiber
With long aramid fibers interlacing together inside, this IMPP cone design provides the strength and rigidity that powerful bass sound requires. High-density compressed internal architecture is resilient, stacks up against high power well and transfers sound quickly. The result is full-bodied, rich sound character with midrange depth that conventional IMPP cones cannot match.
Composite IMPP Cone with Interlaced Aramid
Fiber
29
S p e a k e r s
TS-G Series Speakers
TS-G1641R
16 cm 2-Way Speaker
160 W MAX.
• 30 mm PEI (poly-ether imide) balanced dome tweeter
Common Features
• 16 cm metallic silver IMPP composite cone woofer
• Shallow basket design for installation versatility
TS-G1611R
16 cm Dual-Cone Speaker
160 W MAX.
• Increased installation versatility with extra tabs
(16 cm/GM 17 cm compatibility)
TS-G1341R
13 cm 2-Way Speaker
130 W MAX.
• 30 mm PEI (poly-ether imide) balanced dome tweeter
Common Features
• 13 cm metallic silver IMPP composite cone woofer
TS-G1311R
13 cm Dual-Cone Speaker
130 W MAX.
• Shallow basket design for installation versatility
• Renault/DIN compatible basket
TS-G1041R
10 cm 2-Way Speaker
110 W MAX.
• 30 mm PEI (poly-ether imide) balanced dome tweeter
Common Features
• 10 cm metallic silver IMPP composite cone woofer
TS-G1011R
10 cm Dual-Cone Speaker
110 W MAX.
• 4-/2-hole compatibility (removable screw holes)
TS-G4641R
4" × 6" 2-Way Speaker
100 W MAX.
• 4" × 6" (10 cm × 16 cm) metallic silver IMPP composite cone woofer
• 30 mm PEI (poly-ether imide) balanced dome tweeter
• New custom-fit US/European compatible basket design
High-Power Series Speaker
TS-6975
6" × 9" 3-Way High-Power Speaker
300 W MAX.
Cross-Axial Speaker
TS-2150
20 cm Cross-Axial 3-Way Speaker
200 W MAX.
TS-G1641R
TS-G1341R
TS-G1041R
30
• 6" × 9" (16 cm × 24 cm) rigid oven cone woofer
• 57 mm PI cone midrange
• 32 mm PEI (poly-ether imide) balanced dome tweeter with magnetic fluid
• 20 cm IMPP composite cone woofer/25 mm titanium dome midrange/
20 mm ceramic up-dome tweeter
• Cross-Axial engineering for excellent sound quality
Component Tweeters
TS-S250
40 mm High-Power Tune-Up Tweeter
250 W MAX.
TS-S20
20 mm Component Hard-Dome Tweeter
200 W MAX.
• 40 mm ceramic horn tweeter design
• High-power handling of 250 W max.
• High sensitivity: 97 dB/W
TS-T110
22 mm Component Hard-Dome Tweeter
120 W MAX.
• Built-in –6 dB/oct. capacitor
• Large Pioneer logo on side surface
• 20 mm amorphous-titanium-coated PPS
(polyphenylene sulfide)-dome tweeter
• High-performance strontium magnet
TS-T15
20 mm Component Soft-Dome Tweeter
120 W MAX.
• Built-in LC network: attached at end of speaker cable
• 22 mm PPTA balanced dome tweeter
• High-performance strontium magnet
• Flush and surface mounting capabilities
• Plastic mounting cup for flush mounting
• Heat-resistant voice coil with magnetic fluid
• In-line 6 dB/oct. capacitor for tweeter protection
A/V Center Speaker
TS-CX900
2-Way A/V Center Speaker
80 W MAX.
• 20 mm soft-dome tweeter
• Styrene rubber coated polyester soft-dome diaphragm for extremely smooth sound quality
• High-performance ultra-slim neodymium magnet
• 2-way surface mounting capabilities
• Slant spacer for surface mounting
• Twist-type mounting plate
• Heat-resistant voice coil with magnetic fluid
Satellite Speaker
TS-STX99
Satellite Speaker
80 W MAX.
• 66 mm KEVLAR® Brand Fiber composite cone woofer
• 25 mm balanced dome tweeter with neodymium magnet
• Butyl rubber surround
• Compact aerodynamic cabinet design
• Double neodymium magnet assembly with magnetically shielded circuit design
Marine Speakers
TS-MR2040
20 cm 2-Way Marine Speaker
200 W MAX.
TS-MR1640
16 cm 2-Way Marine Speaker
160 W MAX.
• 5.7 cm KEVLAR® Brand Fiber composite cone full-range speaker
• Butyl rubber surround for smoother response
• Large-diameter voice coil with neodymium magnet
TS-MR1600
16 cm Dual-Cone Marine Speaker
100 W MAX.
• 20 cm water-resistant IMPP cone woofer
• 20 cm glass fiber reinforced plastic deep basket
• 16 cm water-resistant IMPP cone woofer
• 16 cm glass fiber reinforced plastic deep basket
• 16 cm water-resistant IMPP dual-cone speaker
• 16 cm glass fiber reinforced plastic deep basket
Common Features
• Waterproof elastomer surround • Conex damper with elastomer water guard • Gold-plated tinsel wire and terminals • High-quality UV and corrosion-resistant design • Stainless steel mounting hardware
31
32
S p e c i f i c a t i o n s & C o m p a r i s o n
Head Units Features Comparison
DE
H
-P
88
DE
50
MP
DE
H
-P
79
50UB
H
-P
69
50
DE
H
-P
59
IB
DE
50
IB
H
-P
49
DE
H
50MP
-P
39
DE
H
-2
50MP
DE
95
0MP
H
-1
95
0
FH
-P9
FH FH
20
0MP
-P5
00
0M
P
-P
42
00
M
CD
X-P
128
P
CD
X-
0
P6
80
CD
X-F
M
12
CD
X-
87
FM
68
7
KE
H
-P
40
25
KE
H
-P
20
35
RS
-D
7R
II
DEX
-P90
RS
DE
H
-P
80
RS
RS
-P
90
DEQ
-P90
MULTI-CD CONTROL
Scan (disc/track)
CD pause
Repeat <M = Magazine, D = Disc, T = Track, I = ITS>
Random play <M = Magazine, D = Disc, I = ITS>
Disc title memory <100 titles>
CD Text
(1)
List search <D = Disc, T = Track>
Digital compression (2)
Dynamic bass emphasis
(2)
• • • • • • • • • • • • • • •
• • • • • • • • • • • • • •
D/T/I M/D/T/I D/T/I D/T/I M/D/T/I M/D/T/I D/T/I D/T/I D/T/I D/T M/D/T/I D/T/I D/T/I
M/D/I M/D/I M/D/I M/D/I M/D/I M/D/I M/D/I M/D/I M/D/I M/D
•
M/D/I M/D/I
• • • • • • • • • • • • • • • •
• • • • • • • • • • • •
D/T D/T D/T D/T D/T D D
• •
D/T
• • • • • • • •
• • • • • • • •
• • • •
• • • • • • • • •
M M M M
• •
ITS (Instant Track Selection) <M = Max. 99 tracks × 100 discs>
CD PLAYER
CD-R/RW playback <S = With skip play>
WMA (Windows Media™ Audio) playback with WMA Tag
(3)
MP3 playback with ID3 Tag (3) iTunes® AAC playback
(3)
WAV file playback (3)
Folder/file list search (CD-ROM)
D/A Converters with 8 × oversampling digital filter <24 = Multi 24-bit,
B = Burr Brown, 1 = 1-bit>
Digital direct <C = CD-DA only>
Track scan
CD pause
Track/manual search
Disc exist search
Repeat (CD-DA: disc/track, CD-ROM: file/folder) <C = CD-DA only,
M = Magazine/disc/track> play Magazine,
Disc title memory (48 titles)
CD error code transmission capabilities
One-day memory backup
Last position memory
CD Text
List search <F = Folder search only>
Digital compression
BMX (Bitmetric Equalizer)
MD PLAYER
• • • • • • • • • • •
S S S S
• • •
• • • • • • • • • • •
• • • • • • • • • • •
• • • • • • •
• • • • • • • • • •
• • • •
B 1 1 1 1 1 1 1 1 B 1 1 1 1 1 24
•
C
• • • • •
• • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
•
•
•
•
•
•
•
•
•
•
• • • •
•
•
•
•
•
• • • • • •
• • • •
M M M M C C
•
• •
B
•
• • • •
• • • •
• • • •
• • • • • • • • • • • • • • • • •
• • •
F
•
• • • • • • • • •
• • • • • • • •
•20-bit D/A Converter •ATRAC (Adoptive Transform Acoustic Coding) 3
•MDLP (MiniDisc Long Play, up to 320 min.) •Track scan •Repeat (track/disc)/
Pause/Random play (disc) •Track manual search •Title display •Title scroll
CASSETTE PLAYER
•
Full-logic mechanism
Dual-groove SHC head
Music search/Blank skip/Repeat
Dolby B NR
Automatic tape selector for Metal/Chrome
Radio intercept
Time tape counter
• • •
• • •
• • •
• •
• •
• •
• • •
TUNER
Supertuner® (IIID+ = Supertuner® IIID+, IIID = Supertuner® IIID, III™ = Supertuner® III™) IIID IIID IIID IIID IIID IIID IIID IIID IIID IIID IIID
BSM (Best Stations Memory)
Local seek tuning
• •
III™ III™ IIID+
• • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • •
24-station (18 FM/6 AM) presets
9 kHz/10 kHz AM channel spacing switch <9 = 9 kHz only>
• • • • • • • • • • • • • • • •
• • • • • • • • • • • • •
9 9
•
AUDIO
High precision sound master clock circuitry
Hi-bit conversion
High-power output
MOSFET 50 W × 4 (max.)
45 W × 4 (max.)
Gold-plated 8-channel RCA output (high/mid/low/subwoofer)
Front +
•
• •
• • • • • • • • • • • • •
•
• •
G
2 RCA pre-outs
RCA pre-out
Front + Rear + Subwoofer <G = Gold-plated>
Front + Rear/Front + Subwoofer (selectable)
Subwoofer/Non-fading (selectable)
Rear
• • • • • •
G
• •
•
• • • •
IP-Bus input/output
Optical input/output
Optical input <D = with DEX-P90RS/R = with RS-D7RII>
Frequency change: 96 kHz to 44.1 kHz
DSP/EEQ Built-in DSP (Digital Signal Processor)
EEQ (Easy Equalizer)
Multi 24-bit Burr Brown D/A Converters
Burr Brown advanced segment-type 24-bit D/A Converter
Burr Brown D/A Converter
D
•
• • • • • • •
• • • • • • • • • • • • •
• •
•
• •
(1) Requires use of CD text-ready Multi-CD player. (2) Requires use of digital compression and dynamic bass emphasis-ready Multi-CD player. (3) With CD-ROM and CD-R/RW discs.
•
• •
R
Head Units Specifications
CD PLAYER
Frequency response [±1 dB] range
TUNER
Frequency range FM
AM [10 kHz]
[9 kHz] separation
AM usable sensitivity [S/N: 20 dB]
COMPONENT ADD-ON DSP UNIT range response
[IEC-A impedance
MHz kHz kHz
Hz
Single-CD
WMA/MP3 Players
Player
DEH-P8850MP DEH-P7950UB DEH-P6950IB DEH-P5950IB DEH-P4950MP DEH-P3950MP DEH-2950MP DEH-1950
Component Add-on DSP Units
RS-P90 DEQ-P90
5 to 20 000 5 to 20 000 5 to 20 000 5 to 20 000 5 to 20 000 5 to 20 000 5 to 20 000 5 to 20 000 — —
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
87.5 to 108.0
530 to 1 640
531 to 1 602
—
—
—
—
—
—
[0.7 µV] 8 —
20
10
20
10
AUDIO
Max. power output
GENERAL
Dimensions [W × H × D] DIN—Chassis
Nose
D—Chassis
Nose
50 W × 4 mm 178 × 50 × 161 mm 188 × 58 × 23 mm 178 × 50 × 166 mm 170 × 45 × 18
50 W × 4
178 × 50 × 162
188 × 58 × 16
178 × 50 × 162
170 × 45 × 16
50 W × 4
178 × 50 × 162
188 × 58 × 15
178 × 50 × 162
170 × 46 × 15
50 W × 4
178 × 50 × 162
188 × 58 × 15
178 × 50 × 162
170 × 46 × 15
50 W × 4
178 × 50 × 162
188 × 58 × 14
178 × 50 × 162
170 × 46 × 14
50 W × 4
178 × 50 × 162
188 × 58 × 14
178 × 50 × 162
170 × 48 × 14
50 W × 4
178 × 50 × 162
188 × 58 × 14
178 × 50 × 162
170 × 47.4 × 14
50 W × 4
178 × 50 × 162
188 × 58 × 14
178 × 50 × 162
170 × 47.4 × 14
— —
240 × 59 × 240
—
—
191 × 49 × 220
—
—
— —
Head Units Features Comparison
DE
H
-P
88
50
DE
H
MP
-P
79
DE
50UB
DE
H
-P
69
50
IB
H
-P
595
0IB
DE
H
-P
49
DE
50MP
DE
H
-P
39
50
H
M
P
-2
95
DE
H
0MP
-1
95
0
FH
-P
92
00
M
FH
-P
50
00
P
FH
M
P
-P
42
00
M
CD
X-
P1
28
0
P
CD
X-
P6
80
CD
X-
FM
12
CD
X-F
87
M
68
7
KE
H
-P
40
25
KE
H
-P
203
5
RS
-D7R
II
DEX
-P
90R
S
DE
H
-P
80R
S
RS
-P90
DEQ
-P
90
AUDIO (continued)
DSP/EEQ
(continued)
Direct Sub Drive
Subwoofer control
Cellular mute
GENERAL
Advanced Segment 24-bit D/A Converter
High-performance 32-bit floating binary point type DSP oversampling filter
Auto EQ for 3-way network
•
•
• • •
P P P P P P P P P P P P P
•
P
• • •
•
4-mode, 4 3
BBE® digital sound processing (4)
Digital listening position selector
16-band digital graphic equalizer <C = L/R common,
L/R = L/R independent>
• • • • •
• • • • • • •
•
A
• •
• •
C L/R
31-band L/R independent equalizer
3-band parametric equalizer <L/R = L/R independent>
L/R independent 3-way crossover: high/mid/low
3-way network
Parametric bass/treble controls
4-way independent L/R crossover network (high/mid/low/subwoofer)
Loudness <2 = 2-mode selectable>
BTB (Bass/Treble Booster)
Fader
Electronic volume/balance controls
Electronic bass/treble controls
Tone control <B = Bass, M = Mid, T = Treble>
SLA (Source level adjuster)
Spectrum analyzer <2 = 2-mode>
Level indicator <2 = 2-mode>
• •
• • •
L/R
•
• •
• • • • •
• • • • • • • • • •
• •
• •
• • • •
2
•
•
• • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • •
B/M/T B/M/T
• •
•
• • • • • • • • • • • • • • • •
• • • • • •
2
• • • • •
2
• • • • • • • • •
Rotary Commander
Rotary volume <P = Pop-up>
Steering remote controller
Face type <A = Auto-slide, F = Flap-type, P = Pop-up>
High-quality hairline aluminum front panel
Detachable Face Security™
Clock <E = Entertainment>
Dot-matrix OEL (Organic EL) display <FC = Full-color, PB = Pure Blue, B = Blue,
W = White>
• • • •
• • • • • •
P
• • • • •
A A F F P P P P
• •
10
•
A A F A A A
•
• • • • • • • • • • • • •
E
FC
E E
• • • • • • • • • • • •
E
W
Segmented OEL (Organic EL) display
•
= MC
Dual illumination (white or red selectable)
System control terminal
Multi-language display (English/Spanish/Portuguese)
Source CD control <E = External unit control>
Source TV control (analog tuner control)
Source DVD control <E = External unit control>
USB direct iPod® direct connection iPod® adapter ready <E = External unit control>
USB adapter ready <E = External unit control>
External unit control via IP-Bus
AUX-In (with optional CD-RB10 and CD-RB20) <20 = CD-RB20 only>
Display off
Gold-plated screw-type power/ground terminals
One-sided terminals and square aluminum bonnet
Copper-plated chassis
OFC power/ground cable included
Battery voltage meter
•Versatile horizontal/vertical mounting: 0° to 90° (5 steps switchable) •IP-Bus output for direct head unit connection •Entire chassis anti-vibration system
•Voice recognition with CD-VC60
•
•
B
• • •
• • • • • • • • • • • • • • • •
• • • •
E E E E E E E E
•
E
• • • • • • • • • • • • • •
• • •
E E E E E
• • • •
•
• • •
•
E
•
2
• • • •
E
•
• •
E E
• • •
E
2 2 2 2 2 2 2 1 2
•
2
• • • • • • • • • • •
20 20
•
•
• • •
• •
•
• •
•
• •
• • • •
6 m IP-Bus cable included
• •
•Display with control key •Built-in FM modulator (usable frequency; 87.9/88.1/88.3/
88.5/88.7/88.9/89.1/89.3/89.5/89.7/89.9/90.1 MHz) •Selectable modulation level
•Selectable pre-emphasis level •Free space design display
• •
Uses 12-disc magazine JD-1212S (one included)
Uses 6-disc magazine JD-612V (one included)
• •
• •
(4) BBE: Licensed by BBE Sound, Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound Inc.
Head Units Specifications
CD PLAYER
Frequency response [±1 dB]
S/N ratio [1 kHz, IEC-A network]
Component Single-CD Players
RS-D7RII DEX-P90RS
2-DIN Players Multi-CD Players Cassette Players
DEH-P80RS FH-P9200MP FH-P5000MP FH-P4200MP CDX-P1280 CDX-P680 CDX-FM1287 CDX-FM687 KEH-P4025 KEH-P2035
Hz 5 to 20 000 dB 70
5 to 20 000
107
5 to 20 000
105
5 to 20 000
94
5 to 20 000
94
5 to 20 000
94
5 to 20 000
92
5 to 20 000
92
—
—
—
—
—
—
—
—
Dynamic range [1 kHz]
MD PLAYER dB — 98 100 92 92 92 90 90 — — — — response Hz
IEC-A — — — 90 — — — — — — — —
[1 kHz] — — — 90 — — — — — — — —
CASSETTE PLAYER flutter %
Tape frequency response [±3 dB]
Tape S/N ratio [IEC-A network]
TUNER
Hz dB
—
—
—
—
—
—
—
—
30 to 19 000 30 to 19 000
Frequency range FM
AM [10 kHz]
[9 kHz]
MHz 87.5 to 108.0 87.5 to 108.0 87.5 to 108.0 87.5 to 108.0 87.5 to 108.0 87.5 to 108.0 kHz — — 530 to 1 640 530 to 1 640 530 to 1 640 530 to 1 640 kHz 531 to 1 602 531 to 1 602 531 to 1 602 531 to 1 602 531 to 1 602 531 to 1 602
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
30 to 16 000 30 to 16 000
87.5 to 108.0 87.5 to 108.0
530 to 1 640 530 to 1 640
531 to 1 602 531 to 1 602
AM usable sensitivity [S/N: 20 dB]
AUDIO
Max. power output
GENERAL
Dimensions [W × H × D] DIN—Chassis
Nose
D—Chassis
*Chassis dimensions only
Nose
— — 50 W × 4 50 W × 4 50 W × 4 50 W × 4 — — — — 50 W × 4 45 W × 4 mm 178 × 50 × 160 178 × 50 × 160 178 × 50 × 159 — — — mm 188 × 58 × 20 188 × 58 × 20 188 × 58 × 30 — — — mm 178 × 50 × 165 178 × 50 × 165 178 × 50 × 164 178 × 100 × 160 178 × 100 × 161 178 × 100 × 161 mm 170 × 45 × 15 170 × 45 × 15 170 × 45 × 25 169 × 94 × 17 169 × 94 × 28 170 × 94 × 25
257 × 94 × 170* 248 × 66 × 168* 257 × 94 × 170* 248 × 66 × 168* 178 × 50 × 157 178 × 50 × 155
—
—
—
—
—
—
—
—
—
—
—
—
188 × 58 × 20 188 × 58 × 20
178 × 50 × 162 178 × 50 × 160
170 × 48 × 15 170 × 48 × 15
33
34
S p e c i f i c a t i o n s & C o m p a r i s o n
Power Amplifier Features Comparison
GM
-7
30
0M
GM
-6
30
0F
GM
-5
30
0T
GM
-4
30
0F
GM
-3
30
0T
GM
-D
51
0M
RS
-A
9
RS
-A
7
PR
S-D
2000
SP
L
PR
S-D
120
0S
PL
PR
S-
D
41
00
F
PR
S-
D
21
00T
PR
S-D
11
00
M
PR
S-
A
500
Bridgeable 2/3/4-channel capability <F = Class-FD>
Bridgeable 1/2/3-channel capability <F = Class-FD>
Mono amplifier <D = Class-D>
Current amplifier
Full balanced system (bridgeable connection)
High-performance 32-bit floating binary point type DSP
Built-in DSP (Digital Signal Processor) (FIR)
Multi 24-bit Burr Brown D/A Converters
Variable LPF/HPF (40 Hz to 500 Hz, –12 dB/oct.)
Variable LPF/HPF (40 Hz to 120 Hz, –12 dB/oct.)
Variable LPF (40 Hz to 240 Hz, –24 dB/oct.)
Variable LPF (40 Hz to 240 Hz, –18 dB/oct.)
Variable LPF (40 Hz to 240 Hz, –12 dB/oct.)
LPF/HPF (80 Hz, –12 dB/oct.) for A and B channels
LPF (80 Hz, –12 dB/oct.)
Input level control (400 mV to 6.5 V)
Input level control (200 mV to 6.5 V)
Input level control (125 mV to 6.5 V)
Bass level control (–22 dB to +12 dB)
Low load impedance capability (4 ohm, 2 ohm to 8 ohm allowable)
Low load impedance capability (1 ohm to 8 ohm)
Optical digital input
IP-Bus input/output
RCA input and output terminals <G = Gold-plated>
RCA input terminals <G = Gold-plated>
Screw-type speaker terminals <G = Gold-plated>
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
F
F
•
D D D D
•
•
•
• •
•
• • •
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• • •
• • •
•
•
•
•
•
•
1 2
• • •
•
•
•
•
•
(1)
•
•
(1)
• •
•
G G
• • • •
G (3) G (3)
G G G
G (2)
•
G G G G G G
Large screw-type power/ground terminals <G = Gold-plated>
Speaker level input (1.6 V to 26 V)
Speaker line input turn-on sensor
Variable Bass Boost (40 Hz to 120 Hz, 0 dB to +12 dB) <R = Remote>
Bass Boost (50 Hz, 0 dB/+6 dB/+9 dB/+12 dB) <R = Remote>
Subsonic filter (20 Hz, –24 dB/oct.)
Subsonic filter (20 Hz, –18 dB/oct.)
SYNC control
PWM regulated power supply with MOSFET switching
High-performance balanced isolator circuit
High-efficiency MOSFET output section
MASS Amplifier
Sound master clock
DAC volume
All placed
Removable terminal/settings cover
Copper-plated chassis
Black heatsink with aluminum plate
• • • • • •
G G G G G G
G (4) G (3)
• • • • •
R R
•
•
•
•
•
•
•
(5)
•
(5)
• •
R R
•
•
•
•
• • • • •
(1) Output for A-channel (2) Carved gold-plated (3) 4-gauge (4) 0/1-gauge (5) Bass Boost level: 0 dB/+6 dB/+12 dB only (6) Input circuit
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(6)
•
•
•
•
•
•
(6)
•
•
•
•
(6)
•
•
•
•
•
•
•
•
Power Amplifier Specifications
Max. power output [14.4 V]
4-channel mode
2-channel mode
1-channel mode
Continuous 4-channel mode power output
[14.4 V]
2-channel mode
1-channel mode
Frequency response
+0 dB, –1 dB
+0 dB, –3 dB
+0.5 dB, –3 dB
Total harmonic distortion
S/N ratio [IEC-A network]
Dimensions (W × H × D)
* Hi-current mode
GM-7300M
—
—
GM-6300F GM-5300T GM-4300F GM-3300T GM-D510M RS-A9
300 W × 2 (4 Ω) 250 2 (4 Ω) 200
—
×
2 (4 Ω)
—
—
100 W × 4 (4 Ω)
300 W × 2 (4 Ω)
RS-A7 PRS-D2000SPL
100 W × 4 (4 Ω) —
300 W × 2 (4 Ω) —
PRS-D1200SPL PRS-D4100F PRS-D2100T PRS-D1100M PRS-A500
— 600
—
300 W × 2 (4 Ω)
—
—
—
200 W × 2 (4 Ω)
500 W × 1 (4 Ω) — 760 × 1 (4 Ω) 600 W × 1 (4 Ω) —
800
— —
75 × 4 (2 Ω)
—
× ×
4 000 W × 1 (1 Ω) 2 400 W × 1 (1 Ω)
4 (2 Ω)
— 1 200 W × 1 (4 Ω) 800 W × 1 (4 Ω) 600 W × 1 (4 Ω)
1 200 W × 1 (2 Ω)
1 200 W × 1 (1 Ω)
— — —
— 150 W × 2 (4 Ω) 125 2 (4 Ω) 100 60 W × 2 (4 Ω) —
× 2 (2 Ω) 75
150 W × 2 (4 Ω) 150
250 W × 1 (4 Ω) — 380
×
1 (4 Ω) 300 W × 1 (4 Ω) —
360
2 (4 Ω) —
— 750
— 300
500 W × 1 (4 Ω)
2 000 W × 1 (1 Ω) 1 200 W × 1 (1 Ω)
—
150 W × 2 (4 Ω)
600 W × 1 (4 Ω)
—
400 W × 1 (4 Ω)
600 W × 1 (2 Ω)
150 W × 1 (4 Ω)*
300 W × 1 (2 Ω)*
600 W × 1 (1 Ω)*
100 W × 2 (4 Ω)
150 W × 2 (2 Ω)
300 W × 1 (4 Ω)
Hz
Hz
Hz
%
—
10 to 240
—
0.03
10 to 50 000
—
—
0.01
10 to 50 000
—
—
0.015
10 to 50 000
—
—
0.01
10 to 50 000
—
—
0.008
—
—
5 to 240 (mono)
0.03
10 to 100 000
—
—
0.002
10 to 100 000
—
—
0.002
—
10 to 240
—
0.3
—
10 to 240
—
0.3
—
10 to 50 000
—
0.005
—
10 to 50 000
—
0.005
—
10 to 240
—
0.5
10 to 80 000
—
—
0.003
dB 100 95 95 95 100 95 105 105 85 80 100 100 92 107 mm 300 × 60 × 334 300 × 60 × 334 300 × 60 × 334 300 × 60 × 269 300 × 60 × 194 268 x 52 × 250 585 × 330 × 71 585 × 330 × 71 586 × 282 × 65 381 × 282 × 65 304 × 56 × 195 304 × 56 × 195 304 × 56 × 195 300 × 63 × 330
Accessories
CD-UB100
IP-Bus USB Adapter
CD-I200
Interface Cable for iPod®
CD-IU50
Interface Cable for iPod®
(for DEH-P7950UB)
CD-IB100 II
iPod® Adapter
CD-HF1
Hands-Free Kit
* Not available for CDMA system
CD-IP150
Optional IP-Bus Extension
Cable
CD-P75FM
Universal Add-on FM
Modulated Controller with
Wireless Remote Controller
CD-R310
Optional Remote Controller for
DEH Series Head Units
CD-R30-02
Optional Remote Controller for
KEH-P4025
CD-SR100
Steering Remote Controller
CD-RB10
RCA Bus Interconnector
CD-RB20
RCA Bus Interconnector
JD-1212S
Multi-Disc Magazine for
CDX-P1280 and CDX-FM1287
JD-612V
Multi-Disc Magazine for
CDX-P680 and CDX-FM687
RD-221
Power Supply Wiring Kit
RD-223
Optional Wiring Kit
RD-983
Alternator Noise Suppressor
RD-984
Alternator Noise Suppressor
RD-985
In-Line RCA Noise Suppressor
RD-SR520
High-Power Speaker Output to
RCA Adapter
Subwoofers & Speakers Specifications
TS-W01RS
TS-M01RS
Size
Max.
Input
Sensitivity
25 cm
17 cm
300 W
120 W
150 W
50 W
TS-S01RS 7.7
W (1)
15 W
20 Hz to 3 000 Hz
35 Hz to 11 000 Hz
86 dB
89 dB
70 Hz to 24 000 Hz (1)
(2)
86 dB
Impedance
4 Ω
4 Ω
4 Ω
Dimensions
ø276 mm × 94 mm
ø174 mm × 75 mm
ø90
× 67 mm
(2)
TS-T01RS
TS-W12PRS
TS-M171PRS
TS-S101PRS
TS-T031PRS
TS-C171PRS
TS-C131PRS
TS-W8102SPL
TS-W5102SPL
TS-W3001D4
TS-W2501D4
TS-W307D2
TS-W307D4
TS-W257D2
TS-W257D4
TS-W307F
TS-W257F
TS-W301R
TS-W251R
TS-SW1241D
TS-SW1041D
TS-SW841D
TS-WX301
TS-WX11A
TS-WX22A
TS-WX206A
TS-D161S
TS-E2096
TS-E1796
TS-E1396
TS-E1076
TS-E1695
TS-C160R
TS-C130R
TS-C1653
TS-C1353
TS-C1625
TS-C1602
TS-C1002
TS-A1682S
TS-A1672S
TS-A2511
TS-A2011
TS-G1641R
TS-G1611R
TS-G1341R
TS-G1311R
TS-G1041R
TS-G1011R
TS-2150
TS-S250
TS-S20
3.5 cm
30 cm
17 cm
10 cm
28 mm
17 cm
13 cm
38 cm
30 cm
30 cm
25 cm
30 cm
30 cm
25 cm
25 cm
30 cm
25 cm
30 cm
25 cm
30 cm
25 cm
20 cm
30 cm
20 cm
20 cm
16 cm
20 cm
17 cm
13 cm
10 cm
16 cm
16 cm
13 cm
16 cm
13 cm
16 cm
16 cm
10 cm
16 cm
16 cm
25 cm
20 cm
16 cm
16 cm
13 cm
13 cm
10 cm
10 cm
20 cm
40 mm
20 mm
120 W
1 200 W
200 W
60 W
200 W
200 W
150 W
8 000 W
6 000 W
3 000 W
2 500 W
1 200 W
1 200 W
1 000 W
1 000 W
900 W
700 W
800 W
600 W
1 400 W
1 000 W
500 W
800 W
(3)
W
(4)
150 W
(3)
W
(4)
150 W (3) W (4)
260 W
360 W
220 W
160 W
110 W
220 W
250 W
180 W
150 W
150 W
220 W
150 W
150 W
280 W
220 W
400 W
350 W
160 W
160 W
130 W
130 W
110 W
110 W
200 W
250 W
200 W
50 W
300 W
50 W
15 W
50 W
50 W
30 W
3 000 W
2 500 W
1 000 W
800 W
400 W
400 W
350 W
350 W
300 W
250 W
150 W
120 W
350 W
250 W
120 W
150 W
80 W
60 W
80 W
90 W
60 W
35 W
25 W
60 W
60 W
40 W
50 W
50 W
60 W
50 W
50 W
80 W
80 W
80 W
40 W
40 W
40 W
50 W
50 W
35 W
100 W
90 W
20 W
30 W
30 W
25 W
25 W
20 W
1 200 Hz to 48 000 Hz
15 Hz to 2 000 Hz
25 Hz to 9 000 Hz
60 Hz to 30 000 Hz
1 200 Hz to 32 000 Hz
25 Hz to 32 000 Hz
35 Hz to 32 000 Hz
15 Hz to 1 500 Hz
18 Hz to 2 000 Hz
18 Hz to 700 Hz
18 Hz to 1 000 Hz
18 Hz to 500 Hz
18 Hz to 500 Hz
18 Hz to 600 Hz
18 Hz to 600 Hz
20 Hz to 1 500 Hz
20 Hz to 2 000 Hz
20 Hz to 4 000 Hz
20 Hz to 4 500 Hz
18 Hz to 1 000 Hz
20 Hz to 1 000 Hz
30 Hz to 1 500 Hz
20 Hz to 4 000 Hz
54 Hz to 200 Hz
40 Hz to 200 Hz
35 Hz to 200 Hz
22 Hz to 32 000 Hz
27 Hz to 32 000 Hz
25 Hz to 32 000 Hz
25 Hz to 32 000 Hz
28 Hz to 32 000 Hz
40 Hz to 32 000 Hz
45 Hz to 30 000 Hz
30 Hz to 32 000 Hz
25 Hz to 32 000 Hz
35 Hz to 32 000 Hz
30 Hz to 32 000 Hz
40 Hz to 32 000 Hz
30 Hz to 32 000 Hz
30 Hz to 25 000 Hz
60 Hz to 25 000 Hz
25 Hz to 35 000 Hz
25 Hz to 33 000 Hz
25 Hz to 30 000 Hz
28 Hz to 28 000 Hz
28 Hz to 33 000 Hz
28 Hz to 28 000 Hz
30 Hz to 32 000 Hz
30 Hz to 33 000 Hz
30 Hz to 33 000 Hz
25 Hz to 30 000 Hz
25 Hz to 30 000 Hz
45 Hz to 30 000 Hz
35 Hz to 22 000 Hz
35 Hz to 20 000 Hz
60 Hz to 22 000 Hz
60 Hz to 20 000 Hz
80 Hz to 22 000 Hz
20 W
20 W
80 W
50 W
80 Hz to 20 000 Hz
45 Hz to 22 000 Hz
28 Hz to 32 000 Hz
28 Hz to 28 000 Hz
50 W 6 000 Hz to 40 000 Hz
50 W
3 000 Hz
(7)
/
95 dB
92 dB
88 dB
86 dB
90 dB
88 dB
88 dB
91 dB
88 dB
89 dB
87 dB
89 dB
89 dB
87 dB
87 dB
94 dB
92 dB
84 dB
6 Ω
2 Ω or 8 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
1 Ω or 4 Ω
1 Ω or 4 Ω
2 Ω or 8 Ω
2 Ω or 8 Ω
2 Ω DVC
4 Ω DVC
2 Ω DVC
4 Ω DVC
4 Ω
4 Ω
4 Ω
ø68 mm × 64 mm
ø322 mm × 152 mm
ø156 mm × 78 mm
ø110 mm × 52 mm
ø55 mm × 27.1 mm
ø156 mm × 78 mm
ø129 mm × 67 mm
ø400 mm × 359.5 mm
ø327 mm × 304 mm
ø329 mm × 214.2 mm
ø283.1 mm × 192.6 mm
ø327 mm × 172 mm
ø327 mm × 172 mm
ø277 mm × 162 mm
ø277 mm × 162 mm
ø327 mm × 162 mm
ø277 mm × 150 mm
ø327 mm × 164 mm
Mounting
75 mm
69 mm
46 mm
133 mm
67 mm
46 mm
12.2 mm
67 mm
57.3 mm
312 mm
266 mm
188.8 mm
169.2 mm
153 mm
153 mm
143 mm
143 mm
143 mm
131 mm
145 mm
83.5 dB
88 dB
87 dB
85 dB
84 dB
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
ø277 mm × 154 mm
ø329.0 mm × 97.9 mm
ø282.0 mm × 89.6 mm
ø218.4 mm × 75.2 mm
135 mm
82.9 mm
75.6 mm
63.5 mm
501 mm × 389 mm × 415 mm —
ø238 mm
ø278 mm
ø238 mm
ø186 mm
—
101 dB
(5)
101 dB
—
—
—
250 mm × 265 mm × 110 mm —
—
—
107 dB
91 dB
(5)
4 Ω
274 mm × 316 mm × 412 mm —
264 mm × 184 mm × 118 mm 89 mm
—
153 mm × 225 mm
90 dB 4 Ω ø171 mm × 83 mm 59 mm ø128 mm
91 dB
91 dB
91 dB
90 dB
90 dB
91 dB
90 dB
90 dB
90 dB
90 dB
91 dB
90 dB
90 dB
93 dB
93 dB
93 dB
93 dB
93 dB
93 dB
89 dB
91 dB
90 dB
93 dB
93 dB
90 dB
91 dB
91 dB
91 dB
91 dB
91 dB
91 dB
91 dB
93 dB
91 dB
97 dB
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
8 Ω
8 Ω
ø244 mm × 128 mm
ø179 mm × 89.5 mm
ø155 mm × 78.3 mm
ø131 mm × 65 mm
ø167 mm × 84 mm 60.5 mm
ø171 mm × 83.5 mm
(6)
60.5
ø155 mm × 77.3 mm (6) 56.5
ø171 mm × 86 mm
ø171 mm × 77.8 mm
ø167 mm × 84 mm
(6)
ø165 mm × 83 mm
(6)
ø130 mm × 59 mm (6)
237 mm × 163 mm × 110 mm
237 mm × 163 mm × 109 mm
60.5 mm (6)
55.3 mm (6)
87 mm
85 mm
237 mm × 163 mm × 107 mm
237 mm × 163 mm × 93.5 mm
237 mm × 163 mm × 94 mm
237 mm × 163 mm × 94 mm
203.7 mm × 145 mm × 72.5 mm
ø158 mm × 75 mm
ø158 mm × 60 mm
ø285 mm × 153 mm
ø244 mm × 132 mm
158 mm × 102 mm × 63 mm
ø158 mm × 54 mm
ø158 mm × 55 mm
ø129 mm × 57 mm
ø129 mm × 57 mm
ø102 mm × 51 mm
ø102 mm × 51 mm
158 mm × 102 mm × 51 mm
250 mm × 175 mm × 123.2 mm
ø44 mm × 24 mm —
Cut-Out
Dimensions
ø238 mm
ø151 mm
ø68 mm
ø278 mm
ø158 mm
ø90 mm
ø47 mm
ø140 mm
ø121 mm
ø352 mm
ø278 mm
ø278 mm
ø238 mm
ø278 mm
ø278 mm
ø238 mm
ø238 mm
ø278 mm
ø238 mm
ø278 mm mm 222 × 150 mm
96 mm
66 mm
57.3 mm
46.3 mm
86 mm
72 mm
72 mm
72 mm
62 mm
57 mm
44 mm
116 mm
97 mm
45 mm
42 mm
44 mm
46 mm
46 mm
43 mm
43 mm
45 mm
90.5 mm
ø186 mm
ø147 mm
ø121 mm
ø117 mm
ø128 mm
151 mm × 220 mm
151 mm × 220 mm
153 mm × 225 mm
153 mm × 225 mm
151 mm × 220 mm
151 mm × 220 mm
133 mm × 191 mm
ø128 mm
ø128 mm
ø232 mm
ø186 mm
83 mm × 141 mm
ø128 mm
ø128 mm
ø121 mm
ø121 mm
ø106 mm
ø106 mm
95 mm × 153 mm
153 mm × 225 mm
85.5 mm × 73.5 mm × 32.8 mm —
—
—
TS-T110
TS-T15
TS-CX900
TS-STX99
TS-MR2040
TS-MR1640
TS-MR1600
22 mm
20 mm
6.6 cm
5.7 cm
20 cm
16 cm
16 cm
120 W
120 W
80 W
80 W
200 W
160 W
100 W
40 W
40 W
20 W
20 W
40 W
30 W
25 W
2 500 Hz to 30 000 Hz
2 500 Hz to 30 000 Hz
80 Hz to 70 000 Hz
90 Hz to 30 000 Hz
25 Hz to 30 000 Hz
30 Hz to 30 000 Hz
30 Hz to 20 000 Hz
90 dB
90 dB
85 dB
83 dB
92 dB
91 dB
90 dB
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
4 Ω
ø47.1 mm × 20.5 mm
ø37.5 mm × 18.9 mm
98 mm × 120.5 mm × 41 mm
83 mm × 82 mm × 114 mm
ø230 mm × 115 mm
ø175 mm × 84.5 mm
ø175 mm × 84.5 mm
—
—
—
—
75 mm
56 mm
56 mm
(1) With speaker unit only (2) With back chamber (3) Maximum output power (4) Nominal output power (5) In-car, at 65 Hz (6) See page 27 for tweeter dimensions (7) With network (8) Without network
—
—
—
—
ø186 mm
ø130 mm
ø130 mm
Dimensions
Subwoofer
Mounting
Depth
Enclosed Subwoofer
W
W
Speakers
W
Cut-Out Dimension
W
Cut-Out Dimension
D
D
Subwoofer Thiele-Small Parameters*
Recommended enclosure
Revc
Levc
Fs
Zmax
Rms
Mms
Cms
BL
TS-W01RS** TS-W12PRS** TS-W8102SPL TS-W5102SPL TS-W3001D4 TS-W2501D4 TS-W307D2 TS-W307D4 TS-W257D2 TS-W257D4 TS-W307F TS-W257F TS-W301R TS-W251R TS-SW1241D TS-SW1041D TS-SW841D
cu. ft. 0.49 to 0.99 1.0 2.5 1.5 0.50 to 1.0 0.35 to 0.7 1.25 1.25 0.80 0.8 0.7 to 1.3 0.50 to 1.0 0.35 to 0.7 0.15 to 0.5
liters
Ω
14 to 28
3.0
28.3
1.8/7.2
70.8
3.0
42.5
3.0
14.15 to 28.31 9.91 to 19.82 35.4
Dual 3.3 Dual 3.3 Dual 1.5
35.4
Dual 3.0
22.64 22.64 150 150
Dual 1.5 Dual 3.0 3.0 3.3 3.0
19.8 to 36.8 14.2 to 28.3 9.9 to 19.8 4.2 to 14.2
3.0 3.3 3.3 3.3
mH
Hz
Ω
0.669
26
64.2
0.4/1.61
24
43.8/175
5.560
23.2
58.56
5.090
9
29.0
70.62
5.55 (8 Ω)
1.39 (2 Ω)
33.3
4.80 (8 Ω)
1.20 (2 Ω)
38.8
2.18 (4 Ω)
0.65 (2 Ω)
33.9
3.55 (8 Ω)
1.04 (2 Ω)
34.8
2.20 (4 Ω)
0.63 (2 Ω)
37.8
3.59 (8 Ω) 0.934 0.856 1.380
1.07 (2 Ω)
39.7 27.7 40.0 28.0
156.07 (8 Ω) 131.86 (8 Ω) 96.90 (4 Ω) 171.14 (8 Ω) 76.75 (4 Ω) 153.38 (8 Ω) 39.28 35.08 35.78
46.54 (2 Ω) 35.26 (2 Ω) 24.32 (2 Ω) 43.08 (2 Ω) 19.27 (2 Ω) 38.64 (2 Ω)
7.600
1.370 2.410 1.850 0.996
28.9 33.1 43.5 67.5
47.38 59.26 42.67 25.21
9.130 11.733 11.248 11.159
0.730 0.781 1.035 1.923
ft.
Ns/m g
2.27
96
3.3
2.3
135
20.367
800.11
Sd sq. 0.041
13.470
550.50
6.003
401.32
4.711
273.53
2.699
166.72
2.561
164.05 m/N 3.78 × 10
–4
3.15 × 10
–4
6.00 × 10
–5
5.350 × 10
–5
× 10
–5
× 10
–5 –4
1.300
–4 –4
1.200
–4
× 10
T•m 11.8 9.73/19.45 33.640 30.180 29.94 24.28 (8 Ω) 15.90 (4 Ω) 20.54 (8 Ω) 14.50 (4 Ω) 19.29 (8 Ω) 9.220 7.930 8.670
15.12 (2 Ω) 11.97 (2 Ω) 7.95 (2 Ω) 10.27 (2 Ω) 7.25 (2 Ω) 9.64 (2 Ω)
–4
0.495
2.829
137.27
2.539 2.343 1.979 2.293
131.52 124.00 84.78 110.82
0.338 0.550 0.387 0.528
0.680 0.732 0.948 1.641
2.045 0.689 0.291 0.067
57.86 19.51 8.25 1.89
1.686 4.985 4.773 4.063
84.73 280.15 196.99 106.67
–4
8.264
–5
× 10
–5 –5
8.650 16.650 13.666 9.349
Hag
61
Xmax inch 0.067
50 29
0.364 0.514 0.371 0.222
3.38E-02 4.77E-02 3.45E-02 2.06E-02
0.799 1.071 0.870 0.594
20.3 27 22 15
0.236 0.394 0.394 0.315
6 10 10 8
0.31 0.26 0.24 0.14
7.8 6.5 6.0 3.5
* Parameter values for reference. ** See page 13 or 14 for product details.
35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement