Account Activation
1 Getting Started
Universal A-GPS Locator
Quick Start Guide
• Power on your ZoombakTM Locator
and use the AC Wall Charger to fully
charge before starting the activation
process (Note: the initial charging
time is about 6 hours)
• Locate the Device ID number on the
bottom of the package (see right)
• Have a credit card available
• Place your Locator outside or near a
window before starting the
activation process
2 Create Your Zoombak Account
• Go to zoombak.com and click on
“Activate” in the top navigation bar
• Log in to your account or, if you are a
new customer, create a login
profile for your account by entering a
username, password, PIN and secret
security question
• Enter your Locator Device ID number
and give your Locator a unique name
3 Enter Your Billing Information
• Select a payment plan
• Enter your contact and credit card
information
• Account activation is complete
Activation and use of the Zoombak Universal A-GPS Locator are subject to Zoombak’s
customer agreement, plans, terms and conditions, which can be found at www.zoombak.com.
Continued over
Using Your Locator
Setting Up Your Safety Zones
1 Using Your Locator
1 Setting Up Your Safety Zones
• Go to zoombak.com and click on
“Locate” in the top navigation bar
• Enter your username and password to
log in to your account
• Under “My Zones” click on the
“create new” button
• Name your safety zone
• Click on the “device location” tab to set
up a zone around your Locator’s current
or last known location, or manually enter
an address where you would like to base
your zone
2 Try Out Your Locator
• Place your Locator outside or near a
window to test for the first time prior to use
• Click on the “connect” button to connect your
Locator to the network for the first time
• Once your Locator is connected,
click on the “find now” button to locate your
device (Note: It may take up to
60 seconds to locate your device)
• You can click on the help icons featured
throughout the application for additional
information on using each service feature
3 Monitoring Your Locator
• Set up email and mobile phone alerts to notify
you when your Locator battery is low or if your
Locator has been turned off
• Select how you would like to be notified
(email, text message or both), making sure to
check the appropriate notification alert box
• Enter a name and mobile phone number or
email address and click on the “add” button for
each notification alert
• Click the “save” button at the bottom
right of the screen to save all of your alert
notifications
Zoombak services are dependent on your Locator’s ability to acquire satellite signals and
wireless network coverage. See www.zoombak.com for coverage map and details.
2 Create Your Safety Zone Boundary
• Select a boundary or create a
customized boundary for your safety
zone
• A safety zone boundary can be set up
for a radius as small as 110 yards (1/8
mile) and as large as a 1/2 mile
3 Create Your Safety Zone Schedules and Alerts
• Select your Locator
• Create a daily or extended schedule for
your safety zone and click the “create
new” button
• Customize the alerts by selecting the
notifications you want to receive (when
your Zoombak leaves a zone, enters a
zone or both)
• Select how you would like to be
notified (email, text message or both),
making sure to “add” each option by
clicking on the appropriate button
• Click the “save” button at the bottom right
of the screen to save all of your schedules
and alert notifications
Zoombak A-GPS Universal Locator © 2008 Zoombak. All rights reserved. Zoombak is a registered trade mark of Zoombak, LLC.
USV1.0
">
