LRC

EPG

TV

SET

SAT DVD

MENU

OK

EXIT

Universal

Splashproof

Learning

Remote

Control

R

VOL

S

1

4

2

5

PVR

7 8

PR

PG.UP

0

PG.DN

TEXT

9

SUB

3

6

TVS/00485/04

www.TileVision.TV

TileVision® Universal Splashproof Learning Remote Control

The remote control is designed to allow the user to control up to three different devices by using the TV, SAT and DVD buttons to select which device is to be controlled.

The remote control is preprogrammed with a library of codes covering all major device brands. The full code lists for televisions, satellite receivers, DVD recorders/players and CBLs are available for download from the www.tilevision.tv web site.

The remote control also has the facility to directly learn remote control codes from other infrared remote controls. This allows the remote control to learn up to 41 functions for each chosen device.

The remote control can be used in replace of the Sky™ satellite receiver remote control. Enabling control of both the Sky™ satellite receiver and the TileVision from a single remote control.

Contents

Page

The Remote Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

Activating the Remote Control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Replacing the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

How to Control a Device

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

TileVision® Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Entering a Brand Code

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Auto Search – All Brand Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Manual Search – All Brand Codes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Checking/Recalling a Device Code

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Entering a Sky™ Satellite Receiver Code

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Manual Programming and Program Deletion

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Deleting All Button Programs for One Device

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Button Assignment Table

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

The Remote Control

7

EPG

1

12

2

TV

4

SAT

5

9

SET

3

DVD

6

MENU

8

OK

13 10

R

18

22

VOL

14

S

19

1

4

7

24

PR

PG.UP

25

PG.DN

11

TVS/00485/04

2

5

8

0

20

TEXT

27

EXIT

15

16

PVR

21

3

6

9

17

23

SUB

26

1 Power On/Off button – Turns the TileVision® on from, or off to, standby

2 Sound Mute button – Turns the sound on or off

3 SET button – for manual programming.

4 TV ‘Device’ button – Selects the TV’s set of button functions

5 SAT ‘Device’ button – Selects the Satellite

Receiver’s set of button functions

6 DVD ‘Device’ button – Selects the DVD Player/

Recorder’s set of button functions

7 EPG button – Displays the Electronic

Programme Guide

8 MENU button – displays or closes menus

9 Up button – Menu/EPG navigation

10 Right button – Menu/EPG navigation

11 Down button – Menu/EPG navigation

12 Left button – Menu and EPG navigation

13 OK button – Accepts menu selections

14 Input Source button – Displays the Input

Source menu and allows source selection

15 EXIT button – Closes all on-screen menus and lists

16 Colour and Teletext buttons – DTV Text and text menu options

17 Rewind, Pause, Play, and Fast Forward buttons

– For use with TV Sky+™, Virgin V+, DVDs, VCRs, etc.

18 Record button – For use with TV Sky+™, Virgin

V+, DVDs, VCRs, etc

19

Time Shift Record button

20 Stop button – For use with TV Sky+™, Virgin V+,

DVDs, VCRs, etc

21

PVR button

22 VOL Volume up/down buttons – Adjust the volume

23

Number entry buttons

24 PR Programme up/down buttons – Selects next or previous programme

25 Page up/down buttons – EPG navigation

26 Sub button – Turns the subtitles on or off

27 TEXT button – Enters or exits teletext

The TV functions above are the defaults for a new remote control which has not been programmed.

1

Activating the Remote Control

Before the remote control can be used an insulating plastic film must be removed from beneath the battery.

Place the remote control face down on a horizontal flat surface and use the opener to release the battery compartment cover by rotating it in an anti-clockwise direction. Set the battery cover and opener to one side.

Rest one finger lightly on the battery and pull the printed tag to ease the insulating film from underneath the battery. Try to avoid touching the black

O-ring as it is coated with light grease.

Replace the battery cover and lock it back in place using the opener.

LiTh ium

CR2

Cell

032

3V

Remote control with battery cover removed

Replacing the Battery

Place the remote control face down on a horizontal flat surface and use the opener to release the battery compartment cover by rotating it in an anti-clockwise direction. Set the battery cover and opener to one side.

Carefully remove the old battery and dispose of it safely.

Try to avoid touching the black O-ring as it is coated in light grease.

Insert the new CR2032 battery with the positive (+) side upwards. Replace the battery cover and lock it back in place using the opener.

2

How to Control a Device

Press and release the device button: TileVision® (

TV

), satellite receiver (

SAT

) or

DVD recorder/player (

DVD

) that you wish to control. Press the function button you require. The LEDs will light to confirm that a signal is being sent and which device is being controlled.

To select a different device to control, press and release the device button:

TileVision® (

TV

), satellite receiver (

SAT

) or DVD recorder/player (

DVD

) that you wish to control. Press the function button you require. The LEDs will light to confirm that a signal is being sent and which device is being controlled.

TileVision® Codes

The TileVision® learning remote control is supplied with the TV device button set to the TileVision® TV22/FR1 and TV26/FR2 model remote control codes. If these remote control codes are accidentally erased, or if an alternative TileVision® model’s remote control codes are required, enter the appropriate three digit code for the TileVision® model as shown below.

TileVision® Model

TV22/FR1, TV26/FR2

TV19/FR1, TV26/FR1

TV17/FR5,TV23/FR3

TV17/FR4, TV17/FR3, TV17/FR2

TV23/FR2, TV23/FR1

Three Digit Code

368

371

369

370

370

For button assignment information see the table on page 9.

Entering a Brand Code

1 Locate the three digit code in the brand list, for the satellite receiver or DVD recorder/player that you wish to control.

2 Press and hold down the Television (

TV

), satellite (

SAT

) or DVD (

DVD

) device button until the red light stays on, then release the device button.

3 Enter the three digit code using the number buttons 0–9.

4

As each digit is entered the red light will flash once and then remain on.

5 If the three digit code is correct the red light will go out. If the three digit code is incorrect the red light will flash twice and then remain on.

6 Press the original device button again to exit the code entry mode.

Note: If a three digit code is not entered within 30 seconds the red light will flash twice and exit code entry mode. Entering a three digit code will delete/erase the programmed buttons for that device.

3

Auto Search – All Brand Codes

1

Switch the chosen device (TV, satellite receiver, DVD recorder/player) that you wish to find the code for, to ON. When the correct code has been found the device will switch OFF.

2

Press and hold down the TV (

TV

), satellite (

SAT

) or DVD (

DVD

) button until the red light stays on, then release the button.

3 Press the power button ( ) once and release, this will start the auto search mode.

4

When the device switches OFF. Immediately press and release the device button that was initially selected, to save the code in the remote control.

When the red light switches off, all the codes have been tried and the auto search mode has been exited.

To exit the auto search mode before all the codes have been tried, press and release the device button that was initially selected.

To learn which three digit code has been set to control the device see Checking/

Recalling the Device Code on page 5.

Manual Search – All Brand Codes

1

Switch the chosen device (TV, satellite receiver, DVD recorder/player) that you wish to find the code for, to ON. When the correct code has been found the device will switch OFF.

2

Press and hold down the TV (

TV

), satellite (

SAT

) or DVD (

DVD

) button until the red light stays on, then release the button.

PR PR

3 Press PR+ ( ) or PR- ( ) once and release. Each time PR+ (

PR

pressed a code is transmitted.

PR

) or PR- ( ) is

PR

To perform a fast search, press and hold down PR+ ( ) or PR- ( ) button.

PR

PR

When the device switches OFF, release the PR+ ( ) or PR- ( ) button.

PR

Step 4 must be executed so that the code is saved in the remote control.

4 Press and release the device button that was initially selected to save the code in the remote control.

To learn which three digit code has been set to control the device see Checking/

Recalling the Device Code on page 5.

4

Checking/Recalling a Device Code

To find out which three digit code is controlling any device:

1

Press and release the device button: TV (

TV

), satellite (

SAT

) or DVD (

DVD

) for which you want to find the code.

2 Press the same device button again, together with the OK (

OK

) button and release both buttons.

3

The red light will flash.

4

Count the number of flashes for each digit in the three digit code.

5

The red light will remain off for a short time between numbers.

6

When all three numbers have been flashed the red light will remain off.

One Flash = 1

Two Flashes = 2

Three Flashes = 3

Four Flashes = 4

Five Flashes = 5

Six Flashes = 6

Seven Flashes = 7

Eight Flashes = 8

Nine Flashes = 9

Ten Flashes = 0

For example:

Press and release the DVD (

DVD

) button.

Press and release the DVD (

DVD

) and OK (

OK

) buttons.

The remote control would then show nine flashes (9), pause, two flashes (2), pause, and one flash (1), to confirm the three digit code of 921.

Entering a Sky™ Satellite Receiver Code

Refer to page 3 - Entering a Brand Code.

Press and hold down the satellite (

SAT

) device button until the red light stays on, then release the device button.

Enter the 3 digit code. 192, 288 to 294 inclusive.

Test the functionality of the control of the Sky™ satellite receiver.

5

Manual Programming and Program Deletion

High levels of ambient light such as natural sunlight or energy efficient fluorescent lights should be avoided when manually programming the remote control.

Any button other than the device buttons

TV

,

SAT

and

DVD

and the

SET

button can be manually programmed.

Manually Programming a Button

1

Place the original remote control and the learning remote control roughly

10 mm apart facing ‘head-to-head’ with each other.

2 On the learning remote control press and release the required device button,

TV (

TV

), satellite (

SAT

) or DVD (

DVD

) as appropriate.

3 Press and hold the SET (

SET

) button on the learning remote control until the red light lights and remains lit, then release the button. The remote control is now in learning mode.

If the red light does not turn on, go back to step 2 and try again.

4

On the learning remote control press and release the button that is to be programmed. The red light will flash rapidly.

5

On the original remote control, press and hold the button that is to be learned.

When the red light on the learning remote control flashes three times and

then remains lit the code has been learnt. If the red light does not flash, repeat steps 4 and 5.

Note: If step 5 is not completed within 15 seconds the learning remote control will exit learning mode and the light will stop flashing.

6 Repeat steps 4 and 5 to program other buttons.

7

Once the required buttons have been programmed press the SET (

SET

) button again on the learning remote control to exit learning mode.

Deleting All Button Programmes for One Device

1

Press and release the appropriate device button TV (

TV

), satellite (

SAT

) or

DVD (

DVD

) to select which device’s programs are to be deleted.

2 Press and hold the chosen device button together with SET (

SET

) button until the red light flashes three times.

3 All of the programmed buttons for the chosen device have now been cleared of their programming.

Deleting programs from buttons does not delete any three digit brand code which has been entered.

6

Troubleshooting

Problem

The red light flashes five times after a button is pressed.

The red light does not flash when any button is pressed.

The red light does not flash when a

‘programmed’ button is pressed.

The red light flashes when a button is pressed but the TileVision® or device does not respond.

The remote control does not operate a device correctly or some commands are not working.

During learning the red light does not flash three times or stays on for a long time after pressing a button to be learnt.

Solution

Replace the battery with a new type

CR2032 battery.

Replace the battery with a new type

CR2032 battery.

The button has not been programmed or has not been programmed correctly. Program the button.

Ensure that the remote control is within three meters of, and pointed at, the TileVision® or piece of equipment.

Try all listed codes for the device as shown in the control code pdfs which are available from the support section of the TileVision® web site or program the buttons from the device’s own remote control.

Memory is full or a bad capture has occurred. For optimum learning, avoid high levels of ambient light such as natural sunlight or energy efficient fluorescent lights. Try adjusting the position of the remote controls before performing the procedure again.

7

Troubleshooting

If the remote control fails to operate after the battery has been installed or replaced.

A. Gently pull forward the small battery terminal.

B. Gently raise up both prongs.

C. Push the battery flat in to the battery compartment, so that it is in contact with both battery terminals for 5 seconds.

D. Remove the battery and insert the battery at an angle, so it rests on the battery terminal A.

Refit the battery cover and wait 15 seconds before operating the remote control.

LiT hi um

CR

C ell

20

32

3V

C

A

B

8

Button Assignment Table

Programmable

Remote Control

Button

Power On/Off

TileVision® Model/Button Function

TV19/FR1

TV26/FR1 - 371

TV17/FR5

TV23/FR3 - 369

TV17/FR4 /FR3 /FR2

TV23/FR2 /FR1 - 370

Power On/Off Power On/Off Power On/Off

Number buttons 0–9 Number buttons 0–9 Number buttons 0–9 Number buttons 0–9

VOL

Volume

Up/Down

VOL

Volume

Up/Down

Volume

Up/Down

Volume

Up/Down

PR

Programme

Up/Down

Input Source

EPG

EPG

PR

Programme

Up/Down

Input Source

EPG

EPG

Programme

Up/Down

TV/ AV

TV/AV

EPG

EPG

Programme

Up/Down

TV/ AV

TV/AV

No Function

FastText/DTV Text

Fast Rewind

Pause

Play

Fast Forward

TEXT

Text

Mute

MENU

Menu

Up

Down

Left

Right

OK

OK

EXIT

EXIT

Sub

FastText/DTV Text

Picture Mode

Sound Mode

Aspect Ratio

Info

Text

Mute

MENU

Menu

Up

Down

Left

Right

OK

OK

EXIT

EXIT

Subtitles

FastText/DTV Text

No Function

FastText

PSM

Picture Memory

No Function

SSM

Sound Memory

Previous Channel

ARC

Aspect Ratio

MENU

Info

Text

Mute

Menu

Sub Page/Time

Text

Mute

MENU

Menu

Up

Down

Left

Right

OK

OK

No Function

No Function

OK

Up

Down

Left

Right

OK

No Function

No Function

9

Porter Lancastrian Limited

Lower Healey Business Park · Froom Street · Chorley

Lancashire · UK · PR6 9AR

Tel: 0870 871 0111 · Fax: 0870 871 0112 eMail: [email protected] · Web: www.tilevision.tv

TileVision

®

Learning Remote Control Operating Instructions – February 2014 – TVS/00527/04