V1.0

Achiever 507

ELLIPTICAL

T A B L E O F C O N T E N T S

SAFETY INSTRUCTIONS

GETTING STARTED/POWER

MOVING/FOOT POSITION

KNOW YOUR ELLIPTICAL

QUICK START UP

PROGRAMMING

DISPLAY

PROGRAM PROFILES

USING YOUR HRC PROGRAM

USING YOUR FIT-TEST PROGRAM

USING YOUR STEP-TEST PROGRAM

USING YOUR WATTS CONTROL PROGRAM

USING YOUR CUSTOM PROGRAMS

MONITORING YOUR HEART RATE

TARGET HEART RATE ZONE

TROUBLESHOOTING YOUR ELLIPTICAL TRAINER

HEART RATE TROUBLESHOOTING

COMMON PRODUCT QUESTIONS

EXERCISE GUIDELINES

ROUTINE MAINTENANCE

DEVELOPING A FITNESS PROGRAM

THE IMPORTANCE OF WARM UP AND COOL DOWN

ACHIEVING YOUR FITNESS GOALS

WEEKLY LOG SHEET

MONTHLY LOG SHEET

LIMITED HOME USE WARRANTY

!

CAUTION

Read all precautions and instructions in this manual before using this equipment.

Save this manual for future reference.

7

8

9

10

2

5

6

11

13

18

19

20

14

15

16

17

27

28

29

30

22

23

24

26

1

I M P O R T A N T S A F E T Y I N S T R U C T I O N S

S A V E T H E S E I N S T R U C T I O N S

When using an electrical product, basic precautions should always be followed.

Read all instructions before using this exercise product.

WARNING !

To reduce the risk of burns, fire, electrical shock or injury to persons:

• Use this exercise product for its intended use as described in this Owner's guide. Do not use attachments not recommended by the manufacturer.

• Never drop or insert any object into any opening.

• Do not remove the elliptical trainer's side covers.

• N ever operate this elliptical trainer if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in water.

• K eep the cord away from heated surfaces.

• Do not use outdoors.

• Only use the power cord provided with your Horizon Fitness Elliptical Trainer.

• Never place the power cord under carpeting or place any object on top of the power cord, which may pinch or damage it.

• Unplug your Horizon Fitness Elliptical Trainer before moving it.

Information to the check after German Institute for Standardization EN

957:

• Brake system dependent on speed

• W att announcement is calibrated and opposed after EN 957-5

• Device class H

• User's Weight Limit 130kgs

OTHER SAFETY TIPS FOR YOUR HORIZON FITNESS ELLIPTICAL TRAINER

CAUTION!

• If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Do not turn pedal arms by hand.

• Do not wear clothing that might catch on any part of the elliptical trainer.

• Make sure handlebars are secure before each use.

• Read the owner's guide before operating this elliptical trainer.

• Maintain a comfortable pace. Do not 'sprint' above 80 rpms on this machine.

• To maintain balance it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

OPERATION

It is essential that your elliptical trainer is used only indoors, in a climate controlled room.

If your elliptical trainer has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical trainer is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

CHILDREN

• K eep children off of your elliptical trainer at all times.

• When the elliptical is in use, young children and pets should be kept at least 10 feet away.

CLEANING

• Clean with soap with a slightly damp cloth only. Never use solvents.

4

CONGRATULATIONS!

on choosing a Horizon Fitness Elliptical Trainer.

You've taken an important step in developing and sustaining an exercise program!

Your Horizon Fitness elliptical trainer is a tremendously effective tool for achieving your personal fitness goals. Regular use of your Horizon Fitness elliptical trainer can improve the quality of your life in so many ways.

Here are just a few of the health benefits of aerobic exercise

• W eight Loss

• A Healthier Heart

• Improved Muscle Tone

• Increased Daily Energy Levels

• Reduced Stress

• Help in Countering Anxiety and Depression

• An Improved Self Image

The key to reaping these benefits is to develop the exercise habit. Your new Horizon

Fitness elliptical trainer will help you eliminate the obstacles that prevent you from getting in your exercise time. Inclement weather and darkness won't interfere with your workout when you use your Horizon Fitness elliptical trainer in the comfort of your home. This manual provides you with basic information for using and enjoying your new machine. A more complete knowledge of your new Horizon Fitness elliptical trainer will assist you in realizing your goal of a healthy lifestyle.

CAUTION:

BEFORE BEGINNING ANY EXERCISE PROGRAM, ALWAYS CONSULT YOUR

PHYSICIAN. IF YOU EXPERIENCE CHEST PAINS, NAUSEA, DIZZINESS OR SHORTNESS OF

BREATH, STOP EXERCISING AND CONSULT YOUR PHYSICIAN BEFORE CONTINUING.

IMPORTANT: PLEASE READ BEFORE USE!

ASSEMBLY

CAUTION!

There are several areas during the assembly process of a Horizon Fitness elliptical trainer that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical trainer could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical trainer, the assembly instructions must be reviewed and corrective actions should be taken.

G E T T I N G S T A R T E D

POWER

Your Achiever 507 Elliptical Trainer is powered by a power supply. The power supply must be plugged into the power jack.which is located in the front of machine near the front foot tube.

Power jack

LEVELLING

The elliptical trainer should be level for optimum use. Once you have placed the elliptical trainer where you intend to use it, raise or lower the adjustable levellers located on the outside of each pedal arm. Once you have levelled the elliptical trainer, lock the levellers in place by tightening the wing nuts against the frame.

5

MOVING

Your Horizon Fitness elliptical trainer has a pair of transport wheels built into the front of the frame. To move, firmly grasp the rear foot tube carefully lift and roll.

K N O W Y O U R E L L I P T I C A L T R A I N E R

6

CAUTION!

Our elliptical trainers are well built and heavy, weighting up to 120lbs.! Use care and additional help if necessary when moving.

FOOT POSITION

When using your elliptical trainer, you may notice that your heel raises off of the foot pad. This is a natural walking or running motion and you should not try to prevent this.

7

8

QUICK START UP

Your Elliptical Trainer is powered by a adaptor.

1. Grasp the handlebars and step up onto the foot pedals.

2. Press the 'START' button to begin exercising.

To set the timer to count up as you exercise.

Push and hold Reset button to clear any existing data.

To count up from zero simply start pedalling. Note: if you stop pedalling your data will be retained even if the console shuts down after a period of time unless you push the

Reset button.

To set the timer for a fixed period of time to exercise.

Push and hold the button to scroll the minutes up to your desired length of time.

Releasing the button will start the count down.

3. Begin moving your feet. Gradually increase your pace to your target heart rate or perceived exertion level. Warning! Try not to exceed 140 rpms on this machine. The amount of pedalling resistance can be adjusted by pressing the plus + , or minus - buttons

(easiest #25w through to hardest #400w, with 5w up or down/click)

P R O G R A M M I N G

STARTING YOUR WORKOUT

Press the ' START ' button to begin exercising

FINISHING YOUR WORKOUT

Remember to gradually slow down your pace before stopping your workout. The machine will not stop moving if you stop your feet abruptly. After you have finished your workout, the console will `beep' several times to let you know that your workout has finished.

9

D I S P L A Y

10

LEVEL

Show your exercise

RPM

Shown as your rotational speed per minute

TIME

Shown as Minutes: Seconds. View the time remaining or the time elapsed in your workout.

DISTANCE

Shown as miles or kilometers. View the accumulated distance during your workout.

SPEED

Shown as your speed in miles or kilometers per hour.

CALORIES

Shown as your total accumulated calories burned during your workout.

HR

Shown as Beats Per Minute. Used to monitor your heart rate during your workout

(displayed when contact is made with both grips. Pulse can only be viewed while on the pulse screen).

WATT

A measurement of your expending energy. May be used to evaluate and quantify your fitness progress over time.

P R O G R A M P R O F I L E S

Watts Control

Exercise at a set work level. As you increase your pedal rate(RPM), your resistance will decrease; if you decrease your pedal rate (RPM), your resistance will increase

Interval

Improves your strength, speed, and endurance by raising and lowering the resistance levels throughout your workout to involve both your heart and muscles.

Rolling

Maintains weight by gradually raising and lowering the resistance level to gradually raise and lower your heart rate.

Weight loss

Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat burning zone.

Foot Hill

Improve heart and lung capacity by continuing exercise.

Mountain

Improves performance and stamina by raising the resistance level to high peaks to simulate the most difficult outdoor terrains.

11

12

After Burner

Promotes weight loss by raising and lowering the resistance level, while keeping you in your fat burning zone.

HRC 1.2

Benefits weight loss by maintaining an optimum exercise level to burn fat, while adjusting the resistance to keep you in your target heart rate zone.

Fit-Test

Test your current lenel of physical fitness.At completion of the program,it will provide feedbacd regarding your fitness level for you to monitor your progress

Step test

Short Description for Step-Test Improves your endurance by raising the wattage.Wordout time is 30 minutes.

CUSTOM 1.2.3

Customized workout, time defaults to 15 minutes.

U S I N G Y O U R H R C P R O G R A M

Once the HRC quick program key is selected,wait for 5 seconds and you will see the target heart rate flashing in the Heart Rate window. Using the chart on page 19, determine your target heart rate. Your target heart rate should be set at a number that you will be able to exercise at throughout the majority of your workout. To adjust the target heart rate, Press the plus + or minus - buttons.

Once you have chosen your target heart rate, wait for five seconds and you will see the time flashing in the Time window. Press the plus + or minus - buttons to adjust your time. Once you choose your time, Press the‘Start’button and begin your workout.

The ‘THR Zone’ program will have a 5 minute warm up time before it will get you in your

‘target heart rate zone’.

After the 5 miunte warm up period, the resistance level will increase gradually to get the user to the entered ‘target heart rate zone’. Once the user is at the ‘target heart rate zone’, plus or minus 5 beats, the resistance level will remain at the current resistance level.

The last 5 minutes of the program will begin the cool down period. At this time, the program will gradually decrease the resistance level to give the user a smooth cool down.

Note: The Chest Strap Transmitter is required to use the HRC Program.

CHEST STRAP TRANSMITTER PLACEMENT AND MOISTENING THE

ELECTRODES

LOGO

13

14

U S I N G Y O U R F I T - T E S T P R O G R A M

Your Fit-Test Program is designed for you to test your current level of physical fitness.

Upon completion of the program, it will provide feedback regarding your fitness level for you to monitor your progress. To use your Fit-Test Program, follow these instructions:

1) Choose the "Fit-Test" program using the - or + keys, then press "Select".

2) Use the - or + keys to choose the desired Watts set up. The default Watts set up is 100W, and the Watts range is 25 ~ 400W. Next, please press the "Select" key to confirm the Watts setting.

3) Use the - or + keys to choose your Sex, Men or Women. Next, please press the

"Select" key to confirm.

4) Use the - or + keys to choose your Age. The default Age is 30, and the age range is 20 ~ 70 years old. Next, please press the "Select" key to confirm the your Age.

5) Use the - or + keys to choose the desired Time set up. The default Time set is 10 minutes, and the time range is 5 ~ 15 minutes. For an optimum Fit-Test, the recommended program Time set up is 10 minutes. Next, please press the "Select" key to confirm the Time setting.

6) Use the - or + keys to choose your Weight. The default Weight set up is

68kg/150lbs, and the weight range is 20 ~ 150kg / 50 ~ 400lbs. Next, please press the "Select" key to confirm your Weight.

7) Press the "Start" key to begin your Fit-Test Program.

8) After the Fit-Test Program is over the screen will show feedback regarding your level of physical fitness, which are Low, Fair, Average, Good, or Excellent.

9) Reminder: You are unable to adjust the Resistance Level when using the Fit-Test

Program.

U S I N G Y O U R S T E P - T E S T P R O G R A M

USING YOUR STEP-TEST PROGRAM

1. Choose the Step - Test program using the – or + keys, then press select.

2. Use the – or + keys to choose the desired Starts-Watts set up. The default

Watts set up is 100W, and the Watts range is 25 ~ 400W. Next, please press

Select key to confirm the Watts setting.

3. Use the – or + keys to choose your Weight. The default Weight set up is

68kg/150lbs, and the Weight range is 20-150kg/50-400lbs.

4. Next, please press Start key to start the Step Test

The default time is 30 minutes. Stop your workout if you do not feel good. Try to develop your endurance by the next workout. You shall receive feedback information about your training performance.

15

16

U S I N G Y O U R W A T T S C O N T R O L P R O G R A M

Your Watts Control Program is designed for you to exercise at a set work level. The resistance level will increase or decrease according to the pedal rate (RPM) in order to achieve your desired Watts set. To use your Watts Control Program, follow these instructions:

1) Choose the "Watts Control" program using the - or + keys, then press "Select".

2) Use the - or + keys to choose the desired Watts set up. The default Watts set up is 100W, and the Watts range is 25 ~ 400W. Next, please press the "Select" key to con firm the Watts setting.

3) Use the - or + keys to choose the desired Time set up. The default Time set up is 0 minutes, and the time range is 0 ~ 99 minutes. Next, please press the "Select" key to confirm the Time setting.

4) Use the - or + keys to choose your Weight. The default Weight set up is

68kg/150lbs, and the weight range is 20 ~ 150kg / 50 ~ 400lbs. Next, please press the "Select" key to confirm your Weight.

5) Press the "Start" key to begin your Watts Control Program.

U S I N G Y O U R C U S T O M P R O G R A M S

Your Custom Program is designed to allow you to create your own programming, with the ability to save your program settings for future workouts. to use your Custom

Program, follow these instructions:

1) once the Custom Program has been selected, press 'SELECT'

2) Choose your desired time using the + or - keys and press 'SELECT'

3) Choose your desired watt level using the + or - keys and press 'SELECT'. You will need to select a watt level for all 15 segments, pressing 'SELECT' after each segment.

4) once all 15 watt level segments have been chosen, you will need to input your weight, Choose your desired weight using - or + keys. The default weight set up is

68kg/150lbs, and the weight rage is 20~150kg/50~400lbs. Next, please press the

‘SELECT’ key to confirm your weight.

5）Then you will need to input your name. Choose your desired letter using + and -

keys and press 'SELECT'. once you have chosen your desired name which is no more

than 9 letters, press 'STOP' to begin your program. At this time, your program has

been successfully saved into memory, and can be used for future workouts.

6) to reset your program information and delete it from memory, Press and hold the

'SELECT' button for 5 seconds once you have selected the Custom Program in the

startmenu.

7) while using your saved program in the Custom Program, you are able to adjust the

watt level, But any changes will not be saved.

17

18

M O N I T O R I N G Y O U R H E A R T R A T E

Feedback

Your Horizon Fitness elliptical trainer offers two heart rate feedback options. You may choose to use the heart rate handlebars, or the chest transmitter for a hands free workout.

Heart Rate Handlebar

Place the palm of your hands directly on the heart rate handlebars. Both hands must grip the bars for your heart rate to register. When griping the handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Try to maintain moderate pressure while holding onto the heart rate handlebars. It is recommended that you hold the handlebars only long enough the see your heart rate readout on the console. You may experience an erratic readout if consistently holding the handlebars.

Telemetric Chest Transmitter

Prior to wearing the chest transmitter on your chest, moisten the two rubber electrodes with water. Center the chest strap just below the breast or pectoral muscles, directly over your stermum, with the Horizon Fitness logo facing out Note: The chest strap must be tight and properly placed to receive an accurate and consistent readout. If the chest strap is too loose, or positioned improperly, you may receive an erratic or inconsistent heart rate readout.

If you have any problems with the heart rate function please refer to pages 20 & 21 in the troubleshooting section.

Warning!

The heart rate function is not a medical device. Various factors may affect the accuracy of your heart rate reading. The heart rate reading is intended only as an exercise aid.

T A R G E T H E A R T R A T E Z O N E

Your `Target Heart Rate Zone' is a percentage of your maximum heart rate. Target Zones will vary for each individual, depending on age, current level of conditioning, and personal fitness goals. The American Heart Association recommends working-out at a

`Target Heart Rate Zone' of between 60% and 75% of your maximum heart rate. See the chart below for convenient reference. Example for a 42-year old user: find age along the bottom of the chart (round to 40), follow age column up to the target zone bar. Results:

60% of maximum Heart Rate = 108 Beats Per Minute, 75% of maximum Heart Rate = 135

Beats Per Minute.

Heart Rate Chart

19

20

T R O U B L E S H O O T I N G Y O U R E L L I P T I C A L T R A I N E R

Your Horizon Fitness Elliptical Trainer is designed to be reliable and maintenance free.

However, if you do experience problems with your Elliptical Trainer, please reference the troubleshooting guide listed below.

PROBLEM:

There is no display on the console.

SOLUTION:

Remove the console and verify that the console cable is attached properly, making sure that the cable is securely inserted into the console.

PROBLEM:

The elliptical trainer makes a squeaking or chirping noise.

SOLUTION:

Loosen all bolts attached during the assembly process, grease the threads and tighten again.

PROBLEM:

The resistance levels seem to be incorrect, seeming too hard or too easy.

SOLUTION:

Reset the console and allow the resistance to reset to the default position.

Restart the console and retry the resistance levels.

H E A R T R A T E T R O U B L E S H O O T I N G

PROBLEM:

There is no heart rate reading

SOLUTION:

If you are using the chest strap, there may be a poor connection between the electrodes and the skin. Remoisten the electrodes with water.

SOLUTION:

The chest strap may not be positioned properly. Reposition the chest strap.

It may be necessary to experiment with the fit and position of the chest strap.

SOLUTION:

Verify that the distance between the chest strap and the console is not beyond the recommended range of 36 inches.

SOLUTION:

The battery in the chest strap may be dead. Take the chest strap to a jewellery store or return to Horizon Fitness for a battery replacement.

PROBLEM:

Erratic or Inconsistent Readout.

SOLUTION:

This is often caused by dry electrodes or a loose chest strap. Moisture on the rubber electrodes is required for proper operation. Try a more generous coating of water on the electrodes and tightening the chest strap.

Check your exercise environment for sources of interference such as high power lines, large motors, etc.

You may experience an erratic readout under the following conditions:

• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the heart rate handlebars.

• Constant movement and vibration due to constantly holding the heart rate grips while exercising.

• When you are breathing heavily during a workout.

• When your hands are constricted by wearing a ring.

• When your hands are dry or cold. Try moistening your palms or rubbing them togeth er to warm.

• Anyone with heavy arrhythmia.

• Anyone with arteriosclerosis or peripheral circulation disorder.

• Anyone whose skin on the measuring palms is especially thick.

Note: Outside interference sources such as computers, motors and fluorescent lights may cause the heart rate reading to be erratic.

If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.

Please contact your local dealer for further assistance.

21

22

C O M M O N P R O D U C T Q U E S T I O N S

ARE THE SOUNDS MY ELLIPTICAL MAKES NORMAL?

Our Elliptical Trainer are some of the quietest available because they use belt drives and friction free magnetic resistance. We use the highest grade bearings and belts to minimize noise. However, because the resistance system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our Elliptical

Trainer. These mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts will generate some noise which will transmit through the casing and frame. It is also normal for these sounds to change slightly during a workout and over time because of thermal expansion of the parts.

WHY IS THE ELLIPTICAL TRAINER I HAD DELIVERED LOUDER THAN THE ONE

AT THE STORE?

All fitness products seem quieter in a large store showroom because there is generally more background noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness product is placed close to a wall, there will be more reflected noise.

HOW LONG WILL THE DRIVE BELT LAST?

The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are now commonly used in far more demanding applications such as motorcycle drives.

CAN I MOVE THE ELLIPTICAL TRAINER EASIER ONCE IT IS ASSEMBLED?

Your Horizon Fitness ELLiptical has a pair of transport wheels built into the front foot. It is easy to move your ELLiptical by rolling it on the front transport wheels.

It is important that you place your Horizon Fitness ELLiptical in a comfortable and inviting room. Your ELLiptical is designed to use minimal floor space. Many people will place their ELLiptical facing the TV or a picture window. If at all possible, avoid putting your ELL! ptical in a unfinished basement. To make exercise a desirable daily activity for you, the Elliptical Trainer should be in an attractive setting.

E X E R C I S E G U I D E L I N E S

Always consult your physician before beginning an exercise program.

HOW OFTEN?

The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with more frequent exercise. Whether It's 3 days or

6 days, remember that your ultimate goal should be to make exercise a lifetime habit.

Many people are successful staying with a fitness program if they set aside a specific time of day to exercise. It doesn't matter whether it's in the morning before your shower, during your lunch hour or while watching the evening news. What's more important is that it's a time that allows you to keep a schedule, and a time when you won't be interrupted. If you are to be successful with your fitness program, you have to make it a priority in your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!

HOW LONG?

For aerobic exercise benefits, it's recommended that you exercise from between 24 and

32 minutes per session. But start slowly and gradually increase your exercise times. If you've been sedentary during the past year, it may be a good idea to keep your exercise times to as little as five minutes initially. Your body will need time to adjust to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has been found to be most effective. A workout time of 48 minutes or more is recommended for best weight loss results.

23

24

R O U T I N E M A I N T E N A N C E

WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?

We use sealed bearings throughout our Elliptical Trainer so lubrication is not needed. The most important maintenance step is to simply wipe your perspiration off the trainer after each use.

HOW DO I CLEAN MY HORIZON FITNESS ELLIPTICAL TRAINER?

Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your Horizon Fitness elliptical trainer and its operating environment will keep maintenance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the following preventative maintenance schedule be followed.

AFTER EACH USE (DAILY)

Turn off the elliptical trainer with the on/off switch, and unplug the power cord from the wall outlet.

WARNING!

To remove power from the elliptical, the power cord must be disconnected from the wall outlet.

• Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they can cause damage to the elliptical.

• Inspect the power cord. If the power cord is damaged contact Horizon Fitness.

• Make sure the power cord is not underneath the elliptical trainer or in any other area where it can become pinched or cut.

EVERY WEEK

Clean underneath the elliptical, following these steps:

• Turn off the elliptical trainer with the on/off switch.

• Then unplug the power cord at the wall outlet.

• Move the elliptical trainer to a remote location.

• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the elliptical.

• Return the elliptical trainer to its previous position.

EVERY MONTH

• Inspect all assembly bolts and pedals on the machine for proper tightness.

HOW HARD?

How hard you workout is also determined by your goals. If you use your Horizon Fitness

Elliptical Trainer to prepare for a 5K run, you will probably work out at a higher intensity than if your goal is general fitness. Regardless of your long term goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be beneficial! There are two ways to measure your exercise intensity. The first is by monitoring your heart rate (see page 18), and the second is by evaulating your perceived exertion level (this is simpler than it sounds!).

Note:

Always consult your physician before beginning an exercise program.

PERCEIVED EXERTION LEVEL

The second and simpler way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it's time to slow down. Always be aware of other warning signs of overexertion.

25

D E V E L O P I N G A F I T N E S S P R O G R A M

STRETCH FIRST

Before using your Horizon Fitness product, it is best to take a few minutes doing a few gentle stretching exercises. Stretching prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing these stretches.

WALL PUSH

Stand near a wall with the toes of one foot about 18" from the wall, and the other foot about 12" behind the other foot. Lean forward, pushing against the wall with your palms. Keep your heels flat and hold this position for a count of 15 seconds. Make sure that you do not bounce while stretching. Alternate positions of your feet and repeat for a total of 8 repetitions.

STANDING QUADRICEPS STRETCH

Using a wall to provide balance, grasp your left ankle with your left hand and hold your foot against the back of your thigh for a count of 15 seconds. Repeat with your right ankle and hand, and continue alternating for a total of 8 repetitions.

SEATED TOE TOUCH

Sit on the floor with your legs together and straight out in front of you. Do not lock your knees. Extend your fingers towards your toes and hold for a count of 15 seconds. Make sure that you do not bounce while stretching. Sit upright again. Repeat for a total of 8 repetitions.

26

THE IMPORTANCE OF WARM UP AND COOL DOWN

WARM UP

The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your Horizon Fitness product at a slow pace.

COOL DOWN

Never stop exercising suddenly! A cool-down period allows your heart to readjust to the decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your muscles.

A C H I E V I N G Y O U R F I T N E S S G O A L S

An important step in developing a long term fitness program is to determine your goals.

Is your primary goal for exercising on your Horizon Fitness Elliptical Trainer to lose weight? Improve muscle? Burn Stress? Prepare for the spring racing schedule? Knowing what your goals are will help you develop a more successful exercise program. Below are some common exercise goals:

• W eight Loss

• Improve Body Shape and Tone

• Increased Energy Level

• Improved Sports Performance

• Improved Cardiovascular Endurance

• Weight Maintenance

• Strengthen Leg Muscles

• Improved Sleep Patterns

• Stress Reduction

If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing. The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide them up into monthly and weekly segments.

Longer term goals can lose some of the immediate motivation benefits. Short term goals are easier to achieve. Your Horizon Fitness Elliptical Trainer console provides you with several readouts that can be used to record your progress. You can track Distance,

Calories or Time. Time is the most important and useful of test functions.

KEEPING AN EXERCISE DIARY

Photocopy the weekly and monthly log sheets on the following pages to make your personal exercise log book. As time goes by you'll be able to look back with pride at the work you've done. As your fitness improves, you can look back and see how far you've come.

27

28

W E E K L Y L O G S H E E T

WEEK#

DAY

DATE

SUN

MON

TUES

WED

THUR

FRI

SAT

WEEKLY TOTALS

DISTANCE

WEEKLY GOAL:

CALORIES

TIME COMMENTS

WEEK#

DAY

DATE

SUN

MON

TUES

WED

THUR

FRI

SAT

WEEKLY TOTALS

DISTANCE

WEEKLY GOAL:

CALORIES

TIME COMMENTS

M O N T H L Y L O G S H E E T

MONTH

WEEK#

DISTANCE

MONTHLY GOAL:

CALORIES

TIME

MONTHLY TOTALS

MONTH

WEEK#

DISTANCE

MONTHLY GOAL:

CALORIES

TIME

MONTHLY TOTALS

29

30

L I M I T E D H O M E U S E W A R R A N T Y

FRAME-LIFETIME

Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the original owner.

ELECTRONICS & PARTS

Horizon Fitness warrants the electronic components and all original parts for a period from the date of original purchase, so long as the device remains in the possession of the original owner.

Labour

Horizon Fitness shall cover the labour cost for the repair of the device for a period from the date of the original purchase, so long as the device remains in the possession of the original owner.

EXCLUSIONS AND LIMITATIONS

This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the repair or replacement of a defective frame, electronic component, or defective part and is the sole remedy of the warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the elliptical trainer as sold. The warranty does not apply to damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, or neglect. Horizon Fitness shall not be responsible for incidental or consequential damages. All returns must be pre-authorized by Horizon

Fitness. Horizon Fitness' obligation under this warranty is limited to replacing or repairing, at Horizon Fitness' option, the product at one of its authorized service centers.

An Horizon Fitness authorized service center must receive all products for which a warranty claim is made. These products must be received with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase. Parts and electronic components reconditioned to As New Condition by Horizon Fitness or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty terms.

Please consult your local dealer for more warranty details.