Motorola MBP41 /2, /3, /4 baby monitor Quick Start Guide
Below you will find brief information for baby monitor MBP41, baby monitor MBP41/2, baby monitor MBP41/3. This is a short document showing the basic steps to set up your baby monitor for the first time. For a full explanation of all features and instructions, please refer to the User's Guide. The guide will help you connect the power supply to the baby unit and the parent unit, install the battery pack for the parent unit, and fasten the cover for the parent unit. It also explains the basic operation of the keys on both units. This quick overview helps you get started using your new baby monitor quickly and easily.
Advertisement
Advertisement
Advertisement
Key features
Connecting power supply
Installing battery pack
Fastening cover
Camera tilt and pan
LCD display on/off
Talk to baby
Menu settings
Frequently asked questions
Connect the small plug of the power adapter to the baby unit and the other end to the electrical outlet. Only use the enclosed adapter (5.9V DC/1000mA).
Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment.
Use a small cross head or flat end screw driver to fasten the cover.