advertisement
CU515_Cover 9/19/07 5:35 PM Page 1
CU515_Cover 9/19/07 5:35 PM Page 2
Copyright © 2007 LG Electronics, Inc. ALL RIGHTS RESERVED.
All materials used herein, including but not limited to trademarks, service marks, and all other commercially valuable rights, properties and products are owned by and proprietary to LG Electronics,
Inc. and may not be reproduced, republished, redistributed or disseminated, either in whole or in part, without the express written permission of LGElectronics, Inc.
All other marks are proprietary to their respective owners. Features and specifications are subject to change without prior notice.
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS :
LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions:
1. The limited warranty for the product extends for TWELVE (12) MONTHS beginning on the date of purchase of the product with valid proof of purchase, or absent valid proof of purchase, FIFTEEN (15) MONTHS from date of manufacture as determined by the unit’s manufacture date code.
2. The limited warranty extends only to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user.
3. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S, including
Alaska, Hawaii, U.S. Territories and Canada.
4. The external housing and cosmetic parts shall be free of defects at the time of shipment and, therefore, shall not be covered under these limited warranty terms.
5. Upon request from LG, the consumer must provide information to reasonably prove the date of purchase.
6. The customer shall bear the cost of shipping the product to the Customer Service
Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.
2. WHAT THIS WARRANTY DOES
NOT COVER :
1. Defects or damages resulting from use of the product in other than its normal and customary manner.
2. Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of LG, including damage caused by shipping, blown fuses, spills of food or liquid.
3. Breakage or damage to antennas unless caused directly by defects in material or workmanship.
4. That the Customer Service Department at
LG was not notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period.
5. Products which have had the serial number removed or made illegible.
6. This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise, including, but not limited to any implied warranty of marketability or fitness for a particular use.
7. Damage resulting from use of non-LG approved accessories.
8. All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use.
9. Products operated outside published maximum ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
3. WHAT LG WILL DO:
LG will, at its sole option, either repair, replace or refund the purchase price of any unit that does not conform to this limited warranty. LG may choose at its option to use functionally equivalent reconditioned, refurbished or new units or parts or any units. In addition, LG will not re-install or back-up any data, applications or software that you have added to your phone. It is therefore recommended that you back-up any such data or information prior to sending the unit to LG to avoid the permanent loss of such information.
4. STATE LAW RIGHTS :
No other express warranty is applicable to this product. THE DURATION OF ANY
IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTY OF
MARKETABILITY, IS LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY
HEREIN. LG INFOCOMM INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF
THE PRODUCT, INCONVENIENCE, LOSS
OR ANY OTHER DAMAGES, DIRECT OR
CONSEQUENTIAL, ARISING OUT OF THE
USE OF, OR INABILITY TO USE, THIS
PRODUCT OR FOR ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS
PRODUCT.
Some states do not allow the exclusive of limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
5. HOW TO GET WARRANTY SERVICE :
To obtain warranty service, please call or fax to the following telephone numbers from anywhere in the continental United
States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit www.lgeservice.com.
Correspondence may also be mailed to:
LG Electronics MobileComm U.S.A., Inc.
201 James Record Road Huntsville, AL
35824
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE
ADDRESS. Please call or write for the location of the LG authorized service center nearest you and for the procedures for obtaining warranty claims.
CU515_Eng_0919 9/19/07 4:43 PM Page 1
CU515
User Guide
CU515_Eng_0919 9/19/07 4:43 PM Page 2
Table of Contents
For Your Safety . . . . . . . . . . . . . . . . . . . . . . . 5
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . 10
Phone Components . . . . . . . . . . . . . . . . . . . . . . . . 10
Your Phone’s Features . . . . . . . . . . . . . . . . . . . . . . 11
Display Information . . . . . . . . . . . . . . . . . . . . . . . . 13
Getting Started . . . . . . . . . . . . . . . . . . . . . . 16
Installing the SmartChip . . . . . . . . . . . . . . . . . . . . 16
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . 17
Memory card slot . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Inserting the memory card . . . . . . . . . . . . . . . . . . 18
Removing the memory card . . . . . . . . . . . . . . . . . 18
Turning Your Phone On and Off . . . . . . . . . . . . . . 19
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Barring Password . . . . . . . . . . . . . . . . . . . . . . . . . 19
General Functions . . . . . . . . . . . . . . . . . . . 20
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making a Call by Send Key . . . . . . . . . . . . . . . . . . . . 20
Making International Calls . . . . . . . . . . . . . . . . . . . . 20
Ending a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Making a Call From the Contacts . . . . . . . . . . . . . . . 20
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . 21
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Vibrate Mode (Quick) . . . . . . . . . . . . . . . . . . . . . . . . . 21
Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Selecting Functions and Options . . . . . .25
2
In-Call Menu . . . . . . . . . . . . . . . . . . . . . . . .26
During a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Making a Second Call . . . . . . . . . . . . . . . . . . . . . . . . 26
Swapping Between Two Calls . . . . . . . . . . . . . . . . . . 26
Answering an Incoming Call . . . . . . . . . . . . . . . . . . . 26
Rejecting an Incoming Call . . . . . . . . . . . . . . . . . . . . 26
Muting the Microphone . . . . . . . . . . . . . . . . . . . . . . . 26
Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . 27
Conference Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Making a Second Call . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting Up a Conference Call . . . . . . . . . . . . . . . . . . 27
Activate the Conference Call on Hold . . . . . . . . . . . . 27
Adding Calls to the Conference Call . . . . . . . . . . . . . 28
Private Call in a Conference Call . . . . . . . . . . . . . . . . 28
Ending a Conference Call . . . . . . . . . . . . . . . . . . . . . . 28
Video Share Calling . . . . . . . . . . . . . . . . . . . . . . . .28
Making and Answering a Video Share Call . . . . . . . 28
Making a Video Share Call in Camera &
Recording mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . .32
Push to Talk (PTT) . . . . . . . . . . . . . . . . . . . 36
PTT Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Add Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Add Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
PTT Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Pending Invitations . . . . . . . . . . . . . . . . . . . . . . . . 43
CU515_Eng_0919 9/19/07 4:43 PM Page 3
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . .45
New Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Mobile Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Drafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Outbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Sent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Text Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Multimedia Templates . . . . . . . . . . . . . . . . . . . . . . . . 54
Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . .55
Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Multimedia Message . . . . . . . . . . . . . . . . . . . . . . . . . 55
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Service Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . .57
Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Dialed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Received Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
All Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Call Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Data Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
MEdia Net . . . . . . . . . . . . . . . . . . . . . . . . . . .59
MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Saved Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Enter URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Recent Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Browser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Primary Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cache Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Cookie Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Character Encoding . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Scrolling Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Show Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
AuthWallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
AT&T Mall . . . . . . . . . . . . . . . . . . . . . . . . . .63
Shop Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Shop Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Shop Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Shop Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Shop Applications . . . . . . . . . . . . . . . . . . . . . . . . . 63
MEdia Net Home . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Cellular Video . . . . . . . . . . . . . . . . . . . . . . . 64
My Stuff . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
AT&T Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Shop Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
MusicID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
3
CU515_Eng_0919 9/19/07 4:43 PM Page 4
XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Music Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
The Buzz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Music Apps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Audio & Ringtones . . . . . . . . . . . . . . . . . . . . . . . . .74
Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Notepad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Unit Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Date Finder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
D-Day Counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Camera & Recordings . . . . . . . . . . . . . . . . . . . . . . .77
Take Photo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Record Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Record Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Other Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Caller Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Speed Dial List . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Copy All Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Delete All Contacts . . . . . . . . . . . . . . . . . . . . . . . . 82
Service Dial Numbers . . . . . . . . . . . . . . . . . . . . . . 82
My Business Card . . . . . . . . . . . . . . . . . . . . . . . . . 82
View Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
My Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Audio & Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . 83
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Date & Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Flight Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Check Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Handset Information . . . . . . . . . . . . . . . . . . . . . . . 94
Reset Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Q&A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Accessories . . . . . . . . . . . . . . . . . . . . . . . . 98
Safety Guidelines . . . . . . . . . . . . . . . . . . 100
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Address Book . . . . . . . . . . . . . . . . . . . . . . .81
Contact List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
New Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
4
CU515_Eng_0919 9/19/07 4:43 PM Page 5
For Your Safety
Important Information
This user guide contains important information on the use and operation of this phone. Please read all the information carefully for optimal performance and to prevent any damage to or misuse of the phone. Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment.
Before You Start
Safety Instructions
WARNING! To reduce the possibility of electric shock, do not expose your phone to high humidity areas, such as the bathroom, swimming pool, etc.
Always store your phone away from heat.
Never store your phone in settings that may expose it to temperatures less than 32°F or greater than 104°F, such as outside during extreme weather conditions or in your car on a hot day. Exposure to excessive cold or heat will result in malfunction, damage and/or catastrophic failure.
Be careful when using your phone near
other electronic devices. RF emissions from your mobile phone may affect nearby in adequately shielded electronic equipment. You should consult with manufacturers of any personal medical devices such as pacemakers and hearing aides to determine if they are susceptible to interference from your mobile phone. Turn off your phone in a medical facility or at a gas station. Never place your phone in a microwave oven as this will cause the battery to explode.
IMPORTANT! Please read the TIA SAFETY
INFORMATION on page 92 before using your phone.
Safety Information
Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.
] Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.
] Never place your phone in a microwave oven as it will cause the battery to explode.
] Do not dispose of your battery by fire or with hazardous or flammable materials.
5
CU515_Eng_0919 9/19/07 4:43 PM Page 6
For Your Safety
] Make sure that no sharp-edged items come into contact with the battery. There is a risk of this causing a fire.
] Store the battery in a place out of reach of children.
] Be careful that children do not swallow any parts such as rubber plugs (earphone, connection parts of the phone, etc.). This could cause asphyxiation or suffocation.
] Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
] When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is activated, you may be seriously injured.
] Do not use a hand-held phone while driving.
] Do not use the phone in areas where its use is prohibited. (For example: aircraft).
] Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.
] Never store your phone in temperatures less than- 4°F or greater than 122°F.
] Do not use harsh chemicals(such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. There is a risk of this causing a fire.
] Do not drop, strike, or shake your phone severely. Such actions may harm the internal circuit boards of the phone.
] Do not use your phone in high explosive areas as the phone may generate sparks.
] Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.
] Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause fire or electric shock.
] Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.
] Do not disassemble the phone.
] Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.
6
CU515_Eng_0919 9/19/07 4:43 PM Page 7
For Your Safety
] Only use the batteries, antennas, and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.
] Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.
] Do not hold or let the antenna come in contact with your body during a call.
] An emergency call can be made only within a service area. For an emergency call, make sure that you are within a service area and that the phone is turned on.
] Use accessories, such as earphones and headsets, with caution. Ensure that cables are tucked away safely and do not touch the antenna unnecessarily.
Memory card information and care
] Always insert/ remove the memory card while the handset power is off. If you remove it while the power is on, it may be damaged.
] If a damage cannot be fixed, format the memory card.
] The memory card cannot be used for recording copyright- protected data.
] Do not write forcefully on the memo area.
] Carry and store the memory card in its case.
] Do not allow the memory card to get wet.
] Do not leave the memory card in extremely hot location.
] Do not disassemble or modify the memory card.
FCC RF Exposure Information
WARNING! Read this information before operating the phone.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
The design of this phone complies with the
FCC guidelines and these international standards.
7
CU515_Eng_0919 9/19/07 4:43 PM Page 8
For Your Safety
CAUTION
Use only the supplied and approved antenna.
Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of
FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with skin, a minor burn may result. Contact your local dealer for a replacement antenna.
Body-worn Operation
This device was tested for typical body-worn operations with the back of the phone kept 0.6
inches (1.5cm) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of 0.6 inches(1.5cm) must be maintained between the user s body and the back of the phone. Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Bodyworn accessories that cannot maintain 0.6
inches(1.5cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.
8
Vehicle Mounted External
Antenna (optional, if available)
A minimum separation distance of 8 inches
(20cm) must be maintained between the user/bystander and the vehicle mounted external antenna to satisfy FCC RF exposure requirements. For more information about RF exposure, visit the FCC website at www.fcc.gov
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that may cause undesired operation.
Cautions for Battery
] Do not disassemble.
] Do not short-circuit.
] Do not expose to high temperature: 60°C
(140°F).]
] Do not incinerate.
CU515_Eng_0919 9/19/07 4:43 PM Page 9
For Your Safety
Battery Disposal
] Please dispose of your battery properly or bring to your local wireless carrier for recycling.
] Do not dispose in fire or with hazardous or flammable materials.
Adapter (Charger) Cautions
] Using the wrong battery charger could damage your phone and void your warranty.
] The adapter or battery charger is intended for indoor use only.
Do not expose the adapter or battery charger to direct sunlight or use it in places with high humidity, such as the bathroom.
Avoid damage to your hearing
] Damage to your hearing can occur if you are exposed to loud sound for long periods of time. We therefore recommend that you do not turn on or off the handset close to your ear. We also recommend that music and call volumes are set to a reasonable level.
] If you are listening to music whilst out and about, please ensure that the volume is at a reasonable level so that you are aware of your surroundings. This is particularly imperative when attempting to cross the street.
9
CU515_Eng_0919 9/19/07 4:43 PM Page 10
Your Phone
Phone Components
1. Earpiece
2. Left soft key
3. Task menu key
4. Send key
5. Push-To-Talk keys
6. Volume keys
7. Alphanumeric keys
8. Display screen
9. Navigation key
10. OK key
11. Right soft key
12. Message key
13. Camera key
14. End /Power key
15. Clear key
16. Microphone
10
CU515_Eng_0919 9/19/07 4:43 PM Page 11
Your Phone
Your Phone’s Features
1. Earpiece
2,11. Left soft key/Right soft key: Each of these keys perform the functions indicated by the text on the display immediately above them.
3. Task menu key: Multitask simultaneously with voice and data - browse the web, make calls, play games, send and receive messages, and listen to MP3s. All at once.
4. Send key: You can dial a phone number and answer incoming calls. Press this key in standby mode to quickly access the most recent incoming, outgoing and missed calls.
5. Push-To-Talk keys: Use for quick access to the PTT function.
• Pressing and releasing this key while idle displays your PTT contacts.
• Pressing and holding this key while idle displays your PTT history.
• Pressing and holding this key while in a
PTT call allows you to speak to the other call participants.
6. Volume keys: These keys are used to control the volume of ringtone in standby mode and speaker volume during a call.
7. Alphanumeric keys: These keys are used to dial a number in standby mode and to enter number or characters in edit mode.
8. Display screen: Displays phone status icons, menu items, web information, pictures and more in full color.
9. Navigation key: Use for quick access to phone functions.
10. OK key: Short press will launch the WAP browser. Allows you to select and confirm menu options.
12. Message key: Use to retrieve or send text messages.
13. Camera key: Press this key to use the camera feature. Directly goes to the camera mode.
14. End/Power key: Allows you to power the phone on or off, end calls, or return to
Standby Mode.
15. Clear key: Allows you to delete the characters entered or return you to the previous screen.
16. Microphone: Can be muted during a call for privacy.
11
CU515_Eng_0919 9/19/07 4:43 PM Page 12
Your Phone
Speaker key
You can use the speakerphone during a call by pressing the or [speakerphone] key located on the top of the phone. The loudspeaker is automatically deactivated when you end the call.
Advice to the customer
In order to allow better antenna sensitivity LG suggests that you hold the handset as depicted in the figure below.
please do not cover the antenna area with your hand during a call and using a bluetooth connection. It may degrade speech quality.
12
CU515_Eng_0919 9/19/07 4:43 PM Page 13
Your Phone
Display Information
Icon area Camera
Headset jack
Text and graphic area
Removable memory port
Side keys
• Control the volume of ringtone in standby mode
• Speaker volume during a call
PTT key - Use for quick access to the PTT function.
• Pressing and releasing this key while idle displays your PTT contacts.
• Pressing and holding this key while idle displays your PTT history.
• Pressing and holding this key while in a PTT call allows you to speak to the other call participants.
Soft key indications
Area Description
First line Displays various icons.
Middle lines
Display messages, instructions and any information that you enter, such as number to be dialed.
Last line
Shows the functions currently assigned to the two soft keys.
13
CU515_Eng_0919 9/19/07 4:43 PM Page 14
Your Phone
On-Screen Icons
The table below describes various display indicators or icons that appear on the phone’s display screen.
Icon Description
Indicates the strength of the 3G network signal.
Indicates the strength of the network signal.
Indicates that GPRS service is available.Indicates that the EDGE service is available. Connection to the
EDGE service allows you to transfer data at a speed of 200Kb/s(depending on network availability). Check with your operator for network coverage and service availability.
Indicates that GPRS service is available.
Indicates that Flight mode has been activated.
Indicates the status of the battery charge.
Icon Description
Indicates that a call is in progress.
Indicates that the alarm has been set and is on.
Indicates the Schedule function.
Indicates the receipt of a message.
Indicates the receipt of a Voicemail.
Indicates that Ring has been set for alert.
Indicates that Ring after vibration has been ser for alert.
Indicates that Ring and vibration has been set for alert.
Indicates that Silent has been set for alert.
Indicates that Vibration has been set for alert.
Indicates that the speakerphone has been activated.
Indicates that the Bluetooth ® has been activated.
function
* The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. Bluetooth QD ID B013133
14
CU515_Eng_0919 9/19/07 4:43 PM Page 15
Your Phone
Icon Description
Indicates that the data is being transmitted using a Bluetooth connection.
Indicates that the connection to a headset with Bluetooth has been activated.
Indicates that the connection to a hands-free with Bluetooth has been activated.
Indicates that the connection to a stereo Bluetooth device has been activated.
Indicates that the connection to a hand-free & stereo with Bluetooth has been activated.
Indicates that the Multitasking function has been activated.
Indicates that the TTY has been set and is on.
Indicates that the connection to a headset with Bluetooth has been activated.
Indicates that the phone is accessing the WAP or data service.
Icon Description
Indicates that the status of PTT is
Available .
Indicates that the status of PTT is
Unavailable.
Indicates that the status of PTT is Do
Not Disturb.
Indicates a PTT Message is waiting in the PTT Menu.
15
CU515_Eng_0919 9/19/07 4:43 PM Page 16
Getting Started
Installing the SmartChip
When you subscribe to a cellular network, you are provided with a plug-in SmartChip loaded with your subscription details, such as your
PIN, any optional services available and many others.
n Important!
The plug-in SmartChip and its contacts can be easily damaged by scratches or bending, so be careful when handling, inserting or removing the card. Keep all SmartChips out of the reach of small children.
1. If necessary, switch off the phone by holding down the [END] key until the power-off image appears.
2. Remove the battery. To do so:
3. Slide the SmartChip into the SmartChip socket so that it locks the card into place.
Make sure that the notched corner is at the top left and the gold contacts of the card face into the phone.
n Note
When you need to remove the SmartChip, slide it, as shown, and take it out of the socket.
4. To insert the battery, align the golden contacts of the battery with the corresponding connectors on the battery compartment. Press down on the opposite end of the battery until it snaps into place.
16
CU515_Eng_0919 9/19/07 4:43 PM Page 17
Getting Started
5. Attach back cover by sliding it up into position until it clicks.
n Warning
The travel charger must be unplugged before you remove the battery, otherwise, the phone could be damaged.
3. When a phone has been charged fully, disconnect the travel charger from the phone by pulling the connector out.
Charging the Battery
Use of unauthorized accessories could damage your phone and void your warranty.
To use the travel charger provided with your phone:
1. With the battery in position in the phone, connect the lead from the travel charger to the bottom of the phone. Check that the arrow on the lead connector is facing towards the front of the phone.
2. Connect the travel charger to a standard AC wall outlet. Only use the travel charger that comes with the package.
n Note
] If your phone is powered on while charging, you’ll see the bars on the battery indicator icon cycle.
When the battery is fully charged, the bars on the battery indicator icon will flash on and off.
17
CU515_Eng_0919 9/19/07 4:43 PM Page 18
Getting Started
] If the sufficient power is not supplied on USB
Port, recharging through USB would not work properly. This matter would be caused by the problems on PC or USB Hub, so we suggest you to contact producers.
If the battery fails to charge completely:
] After turning the phone on and off, please attempt to recharge the battery.
] After detaching and reattaching the battery, please attempt to recharge the battery.
Inserting the memory card
Insert the memory card into the slot until the memory card is fully inserted into the slot, as shown in the figure below: n Note
The gold connectors must be face up and inserted first into the memory card slot.
Memory card slot
The CU515 supports the microSD memory card.
The memory card can be inserted into the side of the CU515 device. You can use this card to save data files such as MP3 songs. n Note
Always insert/remove the memory card with the handset power off.
The gold connectors must be face up and inserted first into the TransFlash memory card slot.
Use only memory cards that have been approved by the manufacturer. Some memory cards might not be compliant with the handset.
Removing the memory card
1. Push the memory card down into the slot with the tip of your finger.
2. Carefully pull the memory card out of slot.
18
CU515_Eng_0919 9/19/07 4:43 PM Page 19
Getting Started
Turning Your Phone On and
Off
1. Hold down the [END] key until the phone switches on.
2. If the phone asks for a PIN, enter the PIN and press the key.
The phone searches for your network and after finding it goes to the idle screen as illustrated below. From the idle screen, you can make or receive a call.
Access Codes
You can use the access codes described in this section to avoid unauthorized use of your phone. The access codes can be changed by using the Change Codes feature (Menu
9.6.4).
Security code (4 digits)
The security code protects the unauthorized use of your phone. The default security code is set to ‘0000’ and the security code is required to delete all phone entries and to activate the
Restore Factory Settings menu. The security code default setting can be modified from the
Security Settings menu.
n Note
The display language is preset to Automatic at the factory. To change the language, use the
Languages menu option (Menu 9.2.6).
3. When you wish to switch the phone off, hold down the [END] key until the power-off image displays.
Barring Password
The barring password function is required when you use the Call Barring function.
The password is obtained from the service provider when you subscribe to this function.
19
CU515_Eng_0919 9/19/07 4:43 PM Page 20
General Functions
Making a Call
1. Make sure your phone is powered on.
2. Enter a phone number including the area code. To edit a number on the display screen, simply press the key to erase one digit at a time.
] Press and hold the key to erase the entire number.
3. Press the [SEND] key to call the number.
4. When finished, press the [END] key.
Making a Call by Send Key
1. Press the [SEND] key, and the most recent incoming, outgoing and missed phone numbers will be displayed.
2. Select the desired number by using the navigation key.
3. Press the [SEND] key.
Making International Calls
1. Press and hold the key and the international access character ‘+’ will appear.
2. Enter the country code, area code, and the phone number.
3. Press the [SEND] key.
Ending a Call
When you have finished a call, press the
[END] key.
Making a Call From the Contacts
You can store names and phone numbers dialed frequently in the SmartChip as well as in the phone memory known as the Contacts.
You can dial a number by simply selecting a name in the contacts and pressing the
[SEND] key.
20
CU515_Eng_0919 9/19/07 4:43 PM Page 21
General Functions
Adjusting the Volume
During a call, if you want to adjust the earpiece volume, use the side keys of the phone.
In idle mode, you can adjust the ring volume using the side keys.
Answering a Call
When you receive a call, the phone rings and the flashing phone icon appears on the screen.
If the caller can be identified, the caller’s phone number (or name if stored in your Address
Book) is displayed.
1. Open the Flip and press the [SEND] key or the left soft key to answer an incoming call. If Any Key has been set as the answer mode (Menu 9.5.4), any key press will answer a call except for the [END] key or the right soft key.
n Note
] To reject an incoming call, press and hold the side keys on the left side of the phone.
] If Open Flip has been set as the Answer
Mode (Menu 9.5.4), you do not need to press any key. You can answer the call simply by opening the flip.
2. End the call by closing the phone or pressing the [END] key.
n Notice
You can answer a call while using the Address
Book or other menu features.
Vibrate Mode (Quick)
Vibrate Mode can be activated by pressing and holding down the [Star] key.
Signal Strength
If you are inside a building, being near a window may give you better reception. You can see the strength of your signal by the signal indicator on your phone’s display screen.
Entering Text
You can enter alphanumeric characters by using the phone’s keypad. For example, storing names in the Address Book, writing a message, or creating scheduling events in the calendar all require entering text.
The following text input methods are available on the phone.
21
CU515_Eng_0919 9/19/07 4:43 PM Page 22
General Functions
T9 Mode
This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter. The T9 mode automatically compares your keystrokes with an internal linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the key labeled with the required letter once, twice, three or four times until the letter is displayed.
123 Mode (Numbers Mode)
Type numbers using one keystroke per number.
To change to 123 mode in a text entry field, press key until 123 mode is displayed.
A long press changes the mode to 123.
Symbolic Mode
This mode allows you to enter special characters.
n Note
You can select a different T9 language from the menu option. The default setting on the phone is
T9 disabled mode.
22
Changing the Text Input Mode
Change the text input mode by pressing .
You can check the current text input mode in the upper right corner of the screen.
Using the T9 Mode
The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the phone begins to display the characters that it thinks you are typing based on a built-in dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary.
1. When you are in the T9 predictive text input mode, start entering a word by pressing keys to . Press one key per letter.
] The word changes as letters are typed ignore what’s on the screen until the word is typed completely.
] If the word is still incorrect after typing completely, press the [Star] key once or more to cycle through the other word options.
] If the desired word is missing from the word choices list, add it by using the ABC mode.
CU515_Eng_0919 9/19/07 4:43 PM Page 23
General Functions
2. Enter the whole word before editing or deleting any keystrokes.
3. Complete each word with a space by pressing the key or the right navigation key.
To delete letters, press . Press and hold down to erase the letters continuously.
n Notice
To exit the text input mode without saving your input, press the [END] key.
Using the ABC Mode
Use the keypad keys to enter your text.
1. Press the key labeled with the required letter:
] Once for the first letter
] Twice for the second letter
] And so on
2. To insert a space, press the key once.
To delete letters, press the key. Press and hold down the key to erase the letters continuously.
n Note
Refer to the table below for more information on the characters available using the keys.
8
9
6
7
3
4
1
2
5
0
Key
Characters in the Order Display
Upper Case Lower Case
. , ' @ ? ! - : / 1
A B C 2
D E F 3
G H I 4
J K L 5
. , ' @ ? ! - : / 1 a b c 2 d e f 3 g h i 4 j k l 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
Space Key,
0 (Long press) m n o 6 p q r s 7 t u v 8 w x y z 9
Space Key,
0 (Long press)
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text message (a telephone number, for example) more quickly.
Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode.
23
CU515_Eng_0919 9/19/07 4:43 PM Page 24
General Functions
Using the Symbol Mode
The Symbol Mode enables you to enter various symbols or special characters.
To enter a symbol, press the [Star] key.
Use the navigation keys to select the desired symbol and press the [OK] key.
T9 dictionary
The T9 dictionary is a feature that allows the user to add any unique or personal words to the T9 standard language database. The T9 dictionary function can be selected from the
Text Entry Settings sub menu under the Options soft key menu. Within the T9 dictionary function, the user can add, modify, delete or reset personal words.
24
CU515_Eng_0919 9/19/07 4:43 PM Page 25
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize the phone. These functions are arranged in menus and sub-menus, accessed via the two soft keys marked the left soft key and the right soft key. Each menu and sub-menu allows you to view and alter the settings of a particular function.
Soft key functions vary depending on the mode of the phone. The label on the bottom of the display screen immediately above the soft keys indicates the current function.
Press the left soft key to access the available Menu.
A short press will launch the WAP browser.
A short press allows you to select and confirm menu options.
Press the right soft key to access the available
Options.
25
CU515_Eng_0919 9/19/07 4:43 PM Page 26
In-Call Menu
Your phone provides a number of control functions that you can use during a call. To access these functions during a call, press the right soft key [Options].
During a Call
The menu displayed on the handset screen during a call is different from the default main menu displayed when in idle screen, and the options are described below.
Making a Second Call
You can select a number you wish to dial from the Address Book to make a second call. Press the right soft key then select Contacts.
Swapping Between Two Calls
By using three methods, you can switch between two calls.
1. Press the [send] key.
2. Press the left/right navigation key.
3. Press the right soft key and then select "
Swap Calls".
Answering an Incoming Call
To answer an incoming call when the handset is ringing, simply press the [SEND] key.
The handset is also able to warn you of an incoming call while you are already on a call. A tone sounds in the earpiece, and the display will show that a second call is waiting. This feature, known as Call Waiting, is only available if your network supports it.
If Call Waiting is on, you can put the first call on hold and answer the second call, by pressing the [SEND] key.
Rejecting an Incoming Call
You can reject an incoming call without answering by simply pressing the [END] key.
During a call, you can reject an incoming call by pressing the [END] key.
Muting the Microphone
You can mute the microphone during a call by pressing the left soft key [Mute]. The handset can be unmuted by pressing the left soft key
[Unmute]. When the handset is muted, the caller cannot hear you, but you can still hear the caller.
26
CU515_Eng_0919 9/19/07 4:43 PM Page 27
In-Call Menu
Using the Speakerphone
You can use the integrated Speakerphone during a call by pressing the key. The loudspeaker is automatically deactivated when you end the call.
n Warning
Due to higher volume levels, don’t place the phone near your ear while the speakerphone is enabled.
Conference Calls
The conference service provides you with the ability to have a simultaneous conversation with more than one caller. The conference call feature can be used only if your network service provider supports this feature.
A conference call can only be set up when you have one call active and one call on hold, meaning both calls must have been answered.
Once a conference call is set up, calls may be added, disconnected or separated (that is, removed from the conference call but still connected to you) by the person who set up the conference call. These options are all available from the In-Call menu. The maximum number of callers in a conference call is five.
Once started, you are in control of the conference call, and only you can add calls to the conference call.
Making a Second Call
You can make a second call while currently on a call simply by entering the second number and pressing the [SEND] key. When the second call is connected, the first call is automatically placed on hold. You can swap between calls, by pressing the [SEND] key.
Setting Up a Conference Call
To set up a conference call, place one call on hold, conference in the second active call by pressing the right soft key and select the Join
Calls sub menu option from the Conference
Call menu.
Activate the Conference Call on
Hold
To activate a conference call on hold, press the
[SEND] key.
27
CU515_Eng_0919 9/19/07 4:43 PM Page 28
In-Call Menu
Adding Calls to the Conference
Call
To add a call to an existing conference call, press the right soft key, and then select the
Join Calls sub menu from the Conference Call option.
Private Call in a Conference Call
To have a private call with one caller from a conference call, press the right soft key and select the Private Menu from the Conference
Call option. When the numbers of the callers are displayed, select the one you wish to speak in private.
Ending a Conference Call
Currently active conference call can be disconnected by pressing the [END] key.
Video Share Calling
Making and Answering a Video
Share Call
You can make and answer a Video Share Call with other 3G video phones. The other party must have a 3G Video-Share capable phone and be in a video service 3G coverage area. n Note
Before you start a Video Share Call you must check the following:
• Phone must be in a AT&T 3G service area.
• Phone needs the presence of ‘GLOBE’ (you can see the on the left hand of the icon bar on the screen.)
• Select the service via the Video Share menu
(see Menu 9.5.8).
To use Video Share follow these steps:
1. Make a phone call by dialing the number, selecting the number from your contact list or selecting the number from the list of calls you have made or received.
2. Once the connection has been established, after a few seconds the ‘Video Share Ready’ prompt will be displayed on the screen provided the other party is also Video Share enabled and in a 3G coverage area. Then, you are ready to begin sharing your video with the other party (or have video shared with you). (If you set Initial Notification to On from the Video Share (Menu 9.5.8), a notification pop-up window will be displayed. Select Yes and you will be connected directly to live Video Share
Calling).
28
CU515_Eng_0919 9/19/07 4:43 PM Page 29
In-Call Menu
3. To send video to the other party, simply press the camera button OR the right soft key [Options] - [Video Share] and select a Video Share type (Live or Recorded).
Simply, press the Camera button and the live
Video Share Call will start.
n Note
The Speakerphone will be automatically activated when a Video Share session begins, unless a hands-free (Bluetooth or wired head set) is connected.
- Live: You can share a real-time video stream with the other party while having a conversation.
- Recorded: You can share a pre-recorded video clip with the other party while having a conversation.
(Note that you can share only H.263 QCIF sized video files)
4. If the other party accepts your request, a video share session begins.
(It takes several seconds for the other party to accept your invitation and start the Video
Share Call.)
During the Video Share session with the other party, you can select a menu item using the navigation keys by pressing the left soft key
.
- Stop: stops video sharing and proceeds with voice call only.
- Brightness: adjusts the brightness of the screen.
- Mute/Unmute: mute/unmute the microphone.
- Spk. Off/Spk. On: when Spk. On is selected, you can have a conversation using the speakerphone. When Spk Off is selected, you can have a conversation using the headset.
You can record a current video clip via Options menu, and the recorded video will be saved in
[My stuff] – [Video].
29
CU515_Eng_0919 9/19/07 4:43 PM Page 30
In-Call Menu
5. Select the STOP menu item to stop sending video, or press the End key [End Call] to finish the call, or turn off the handset.
n Note
1. A Video Share Call will be terminated in the following cases:
• When trying to make a conference call / second call during a call.
• When holding or being held in a Video Share call.
• When the voice call is disconnected.
• When moving out of a AT&T 3G service area.
• When the network connection is poor.
2. A Video Share Call will be unavailable in the following cases (“Video Share Ready” message will be greyed out).
• When trying to make a conference call / second call during a Video Share Call.
• When holding or being held in a call.
• When moving out of a AT&T 3G service area.
“To receive a Video Share session:”
1. If you receive a Video Share request during a call, select [Accept] to accept the request. If you don’t want to accept the request, press [Decline]. When you're a recipient of a Video Share session, the following menu items are available:
30
- Stop: stops video sharing and proceeds with voice call only.
- Landscape: displays the incoming video stream in landscape mode.
- Mute/Unmute: mute/unmute the microphone.
- Spk. Off/Spk. On: when Spk. On is selected, you can have a conversation using the speakerphone. When Spk. Off is selected, you can have a conversation using the headset.
n Note
• The speakerphone will be automatically turned on when a Video Share Call begins, and automatically back to the previous mode when a Video Share Call ends.
• If a hands-free or a Bluetooth headset is connected, then the speakerphone menu will be deactivated.
CU515_Eng_0919 9/19/07 4:43 PM Page 31
In-Call Menu
Making a Video Share Call in
Camera & Recording mode
When you are in Camera & Recording mode, you can easily make a Video Share Call to a person in your Contact List.
1. Press the right soft key [Options] in
Take Photo/Record Video mode and select
[Video Share]. (This menu item is displayed only in 3G coverage. If it is unavailable, you will not be able to select from this menu item.)
2. This screen provides you with three options to make a Video Share Call:
a. Enter a number directly.
b. Select a number from the list of recent video sharers (last five numbers).
c. Select a number from the contact list.
n Note
• If the other party is not available for a Video
Share Call, then the call will remain as a normal voice call.
Saving your Video Share
You can save your Video Share session if you are the sender. There will be a prompt asking if you would like to save or discard the video at the end of the Video Share session. If you choose to save the video, it will be saved in the "My Stuff," folder in your phone.
31
CU515_Eng_0919 9/19/07 4:43 PM Page 32
Menu Tree
The following illustration shows the available menu structure and indicates the:
] Number assigned to each menu option.
] Page where you can find the feature description.
1. Push to Talk (PTT) (see page 36)
1.1 PTT Contacts
1.2 Add Contact
1.3 Add Group
1.4 PTT Settings
1.5 Pending Invitations
2. Messaging (continued)
2.0 Message Settings
2.0.1 Text Message
2.0.2 Multimedia Message
2.0.3 Voicemail
2.0.4 Service Messages
2. Messaging (see page 45)
2.1 New Message
2.2 Inbox
2.3 IM
2.4 Mobile Email
2.5 Drafts
2.6 Outbox
2.7 Sent
2.8 Voicemail
2.9 Templates
2.9.1 Text Templates
2.9.2 Multimedia Templates
2.9.3 Signature
3. Recent Calls (see page 57)
3.1 Missed Calls
3.2 Dialed Calls
3.3 Received Calls
3.4 All Calls
3.5 Call Duration
3.6 Data Counter
32
CU515_Eng_0919 9/19/07 4:43 PM Page 33
4. MEdia Net (see page 59)
4.1 MEdia Net Home
4.2 Bookmarks
4.3 Saved Pages
4.4 Enter URL
4.5 Recent Pages
4.6 Security
4.7 Browser Settings
4.7.1 Accounts
4.7.2 Primary Storage
4.7.3 Cache Settings
4.7.4 Cookie Settings
4.7.5 Character Encoding
4.7.6 Scrolling Control
4.7.7 Show Image
4.7.8 AuthWallet
5. AT&T Mall (see page 63)
5.1 Shop Tones
5.2 Shop Games
5.3 Shop Graphics
5.4 Shop Multimedia
5.5 Shop Applications
5.6 MEdia Net Home
6. Cellular Video (see page 64)
Menu Tree
7. My Stuff (see page 65)
7.1 Games
7.2 Applications
7.3 AT&T Music
7.4 Audio & Ringtones
7.5 Graphics
7.6 Video
7.7 Tools
7.7.1 Alarm Clock
7.7.2 Calendar
7.7.3 Notepad
7.7.4 Calculator
7.7.5 Tip Calculator
7.7.6 World Clock
7.7.7 Tasks
7.7.8 Stop Watch
7.7.9 Unit Converter
7.7.0 Date Finder
7.7.* D-Day Counter
7.8 Camera & Recordings
7.8.1 Take Photo
7.8.2 Record Video
7.8.3 Record Voice
7.9 Other Files
7.0 Memory Card
33
CU515_Eng_0919 9/19/07 4:43 PM Page 34
Menu Tree
8. Address Book (see page 81)
8.1 Contact List
8.2 New Contact
8.3 Caller Groups
8.4 Speed Dial List
8.5 Copy All Contacts
8.6 Delete All Contacts
8.7 Service Dial Numbers
8.8 My Business Card
8.9 View Options
8.0 My Numbers
9. Settings (see page 83)
9.1 Audio & Ringtones
9.1.1 Shop Tones
9.1.2 Ringtones
9.1.3 Volume
9.1.4 Message Alert Tones
9.1.5 Alert Type
9.1.6 Key Tones
9.1.7 Increasing Ringtone
9.1.8 Power On/Off Tones
9.2 Display
9.2.1 Shop Graphics
9.2.2 Wallpapers
9.2.3 Backlight Timer
9.2.4 Brightness
9.2.5 Menu Styles
9.2.6 Languages
9.2.7 Dialing Fonts
9.2.8 Clocks & Calendar
9.2.9 Color Schemes
9.3 Bluetooth
9.3.1 Turn On/Off
9.3.2 Search New Device
9.3.3 Paired Devices
9.3.4 Settings
34
CU515_Eng_0919 9/19/07 4:43 PM Page 35
9. Settings (continued)
9.4 Date & Time
9.4.1 Set Date
9.4.2 Date Format
9.4.3 Set Time
9.4.4 Time Format
9.4.5 Auto Update
9.5 Call
9.5.1 Call Forwarding
9.5.2 Send My Number
9.5.3 Auto Redial
9.5.4 Answer Mode
9.5.5 Minute Minder
9.5.6 Call Waiting
9.5.7 Call Reject
9.5.8 Video Share
9.5.9 Send DTMF Tones
9.5.0 TTY
9.5.* Hearing Aid
9.6 Security
9.6.1 Lock Handset
9.6.2 PIN Code Request
9.6.3 Fixed Dial Number
9.6.4 Change Codes
9.6.5 PTT Key Lock
Menu Tree
9. Settings (continued)
9.7 Connection
9.7.1 Network Profiles
9.7.2 USB Connection Mode
9.8 Flight Mode
9.9 Software Update
9.0 Check Memory
9.0.1 Common
9.0.2 Reserved
9.0.3 SmartChip
9.0.4 Memory Card
9.* Handset Information
9.# Reset Settings
9.#.1 Clear Memory
9.#.2 Reset Default
35
CU515_Eng_0919 9/19/07 4:43 PM Page 36
Push to Talk (PTT)
Welcome to PTT
Push to Talk (PTT) from AT&T lets you see whether your family, friends, and co-workers are available to talk before you call. You can reach them individually or all at once via a group call, all in an instant. Read on to hear about all of the features AT&T Push to Talk has to offer.
Initialize your PTT Service
Begin initializing your PTT service by pressing the PTT Key (black button on left side of phone) or by entering Push to Talk(1) from the Main
Menu.
You will then register your name and, once initialization completes, begin adding your family, friends, and co-workers who are also
AT&T PTT subscribers.
PTT Tips
PTT is a great way of communicating instantly with the people who are important to you.
Here are a few tips to help you.
1. Make sure you are holding the PTT Key down while you talk.
2. Make sure you don't start talking until
AFTER you hear the tone.
3. Note the location of the speakerphone and microphone to make sure you aren't covering either with your grip.
4. PTT calls can be easily started with the flip closed. During a PTT call with the flip open and speaker OFF, the call will be terminated when the flip is closed. When the speaker is
ON, closing the flip will not terminate the call.
5. Turn the volume up high to more clearly hear your PTT calls.
Icon Descriptions
] My Availability: Your availability icon appears next to the signal indicator on your idle screen. This icon indicates the availability others will see for you when you are listed in their PTT Contacts.
Available
This will be your availability state once you initialize service and it will not change unless you change it as noted below.
36
CU515_Eng_0919 9/19/07 4:43 PM Page 37
Push to Talk (PTT)
Unavailable
This becomes your availability state if you power off your phone, turn PTT Off, or if the system detects you have moved out of coverage.
Do Not Disturb
This becomes your availability state if you change My Availability (Menu 1.4.1) to Do Not Disturb. In this state you may place PTT calls but will not receive a PTT call.
PTT Message
This icon appears in place of your availability status notifying you that a
PTT message is waiting. To access these messages go to Push to Talk (1) on the
Main Menu. The message will either immediately display or may be found under Pending Invitations (5).
] PTT Contact Availability: This section covers the icons which will appear next to individuals and groups in your PTT Contacts list indicating their availability.
• INDIVIDUALS:
Available
This contact is available to talk.
Unavailable
This contact has turned PTT Off, powered down their phone, or moved out of coverage.
Do Not Disturb
This contact is not receiving PTT calls.
Silent/Vibrate
This contact is available to receive PTT calls. However they will be given the option to accept or reject your PTT call.
Invitation in Progress
You are waiting for this contact to accept your invitation.
• GROUPS:
Available
At least one member of the group is available to talk.
Unavailable
Every member has powered down their phone, turned PTT Off, or moved out of coverage.
37
CU515_Eng_0919 9/19/07 4:43 PM Page 38
Push to Talk (PTT)
Do Not Disturb
None of the members of the group can be contacted.
Silent/Vibrate
All members of the group are available to receive a PTT call but each will be given the option to accept or reject your call.
Invitation in Progress
You have sent an invitation to join a group and none of the members have yet accepted. Once one member accepts this status will change and calls will complete to all members who have accepted and are available.
PTT Calls
A PTT call can only be made to individuals or groups you have established in your PTT
Contacts. See PTT Contacts for instructions to set up individuals/groups.
Making a PTT Call
1. Push and quickly release the PTT Key to access your contact list. To access frequently called numbers, Push and hold the PTT Key to access your PTT Call History.
38
2. Select the individual or group you want to call. Make sure an available icon is displayed next to the name.
n Note
Calls can not be placed to Quick Group or
Dynamic Group in your PTT Call History.
3. Press and hold the PTT Key to activate the call. A tone will immediately play indicating you have the floor and may begin speaking.
4. Release the PTT Key when you are done speaking.
Receiving a PTT Call
1. For the best experience your ringer should be set to the highest possible volume.
2. If your status is Available you will hear a PTT
Call tone and then the caller's voice.
3. If your status is Vibrate All your phone will vibrate and then you must accept or reject the call. If set to Silent their will be no call notification tone.
a. Accepting the call then plays the callers voice over the earpiece.
b. Rejecting the call terminates the call. PTT calls are not forwarded to voicemail.
CU515_Eng_0919 9/19/07 4:43 PM Page 39
Push to Talk (PTT)
Convert to Cellular
During a PTT call the call originator may convert the call over to a cellular call.
1. Call originator selects Options and then selects Convert to Cellular. The originator no longer has to press the PTT key to be heard.
2. Other participants on the call will remain in a PTT call until they press the PTT Key.
Call Waiting
• While on a PTT call you will be notified of incoming PTT calls. Accepting the incoming
PTT call suspends the first call. Rejecting the incoming PTT call terminates it.
• While on a PTT call you will be notified of incoming cellular calls. Accepting the incoming cellular call suspends the PTT call. Rejecting the incoming cellular call forwards it to voicemail.
• While on a cellular call you will be notified of incoming PTT calls. Accepting the incoming PTT call suspends the cellular call. Rejecting the incoming PTT call terminates it.
How a PTT call works
When you make a PTT call, you can instantly speak to other AT&T PTT subscribers. During a
PTT call only one person can speak at a time.
You can tell whether it is your turn to speak by listening for the following tones:
PTT Floor Held tone
This tone plays when you press and hold the
PTT Key. It indicates you have the floor and your speech will be heard by the other call participants.
PTT Floor Release tone
When you let go of the PTT Key you will hear this tone as will the other participants on the call. All of your speech prior to this tone has been heard by other participants. Others on the call are now aware that the floor is open and they have an opportunity to speak by pressing their PTT Key.
Error tone
If you attempt to speak by pressing your PTT
Key and someone else still has the floor you will hear this tone.
39
CU515_Eng_0919 9/19/07 4:43 PM Page 40
Push to Talk (PTT)
The PTT Key
The black key on the left hand side of the phone is your PTT Key.
• Pressing and releasing this key while idle displays your PTT contacts.
• Pressing and holding this key while idle displays your PTT history.
• Pressing and holding this key while in a
PTT call allows you to speak to the other call participants.
To make a call press and release your PTT key to display your contacts. Select the person or group you wish to connect with and Press and
Hold the PTT Key.
n Note
Customers should not initiate or participate in a
PTT call while driving. The current version of our
PTT product requires you to press the button while talking. For this reason we advise against using PTT while driving, including with a car kit or personal handsfree kit.
PTT Contacts
Menu 1.1
When accessing your PTT Contacts, Options displays on your Right Soft Key. Options may change depending on whether an individual or a group was highlighted when you selected
Options.
• INDIVIDUALS:
] Quick Group Call: This option allows you to make a group call without pre-establishing it in your PTT Contacts. After selecting this menu item from PTT Contacts, Options, a list of available individuals will present. Select those you wish to include in your call (up to
7). Then press the PTT Key to begin your
Quick Group call.
] Call Me Alert: This option allows you to send a message to an individual in your PTT
Contacts whose status is Available,
Silent/Vibrate, or Do Not Disturb. First select the individual, select Options, and then select Call Me Alert. A message will display on their idle screen "Please Call" and your name. They can simply press their PTT Key to call you back.
] Voice Message: This option allows you to leave a voicemail instantly. For a message to a contact, simply highlight the contact on
40
CU515_Eng_0919 9/19/07 4:43 PM Page 41
Push to Talk (PTT) your PTT Contacts, select Options, and select
Voice Message. Pushing the PTT Key begins the recording. Releasing the PTT Key ends the recording and deposits your message.
] Add Contact: This option allows you to send an invitation to the contact that the user has selected. After the person accepts the invitation, he or she will be listed as an available PTT contact.
] Add Group: This option allows you to create a new PTT group.
] Rename: You can edit the name of the individual.
] Delete: You can delete the individual.
] Copy to Address Book: This option allows you to copy the name and number to your
Address Book.
] New Message: You can send a new text or multimedia message to selected member.
• GROUPS:
] View Members: This option displays all members of a group along with their
Availability.
] Dynamic Call: It is similar to Quick Group
Call however the participants you select from are only those participants in the group.
] Voice Message: This option allows you to leave a voicemail to a group in your PTT
Contacts or select members from the group.
Select the members of Voice Message and press Ok once. Select the group to receive the message. Pushing the PTT Key begins the recording. Releasing the PTT Key ends the recording and deposits your message.
] Add Group: This option allows you to create a new PTT group.
] Leave Group: If you have joined a group originated by another this option allows you to leave the group but the group remains intact for all other participants.
] Add Member: This option displays only when you have highlighted a group which you have originated. After adding any additional members, a notification is sent to the other group participants of the new group members.
] Remove Member: This option displays only when you have highlighted a group which you have originated. After removing a member a notification is sent to the individual.
] Delete Group: Deleting a group which you originated deletes the group from PTT
Contacts for all participants.
41
CU515_Eng_0919 9/19/07 4:43 PM Page 42
Push to Talk (PTT)
] Rename: If you have joined a group originated by another this option allows you to edit the name of the group.
] New Message: You can send a new text message to all members of the selected group.
Add Contact
Menu 1.2
1. Select Add Contact in the PTT menu.
2. Enter the contact's name and phone number and then select [OK]. An invitation to join your PTT Contacts will be sent.
3. The availability icon will be Invitation in
Progress until the individual accepts.
4. Once accepted they are part of your PTT
Contacts and you are part of theirs.
Add Group
Menu 1.3
Setting up a PTT group is a great way to quickly call a group of people you routinely need to reach. A group can be made up of individuals in your PTT Contacts or other AT&T
PTT subscribers you don't necessarily want to add to your PTT Contacts.
1. After selecting Add Group you will be asked to name your group.
42
2. Next step is to choose members. Choosing
Select In Contacts lets you chose from your
PTT Contacts. Choosing New Contact lets you add someone not in your PTT Contacts.
a. If you want to add both types of contacts then you will need to select one option and save the group.
b. Then using Add Member in the PTT
Contacts Options menu you can add the remaining members.
3. Once you have saved your group invitations will be sent to each contact for their acceptance. The Invitation in Progress icon will display next to the group until one member accepts. Availability will then update each time a person accepts.
4. When a participant accepts your invitation the group is now in their PTT Contacts and they may also place calls to the group.
5. Maximum members in a group is 30, 29 participants and yourself. You may have up to 30 groups in your PTT Contacts.
PTT Settings
Menu 1.4
] My Availability: This option allows you to change your Availability status between Do
Not Disturb and Available.
CU515_Eng_0919 9/19/07 4:43 PM Page 43
Push to Talk (PTT)
] Contact Alerts: This feature allows you to be alerted when the availability status of a contact changes from Unavailable or Do Not
Disturb to Available or Silent/Vibrate.
1. Once Contact Alerts is selected a list of individuals from PTT Contacts will display.
Select those individuals for whom you want to receive alerts for availability changes.
2. Once selected you will receive alerts for availability changes until you de-select them.
3. An alert consists of a tone as well as a PTT message when you access the PTT Menu.
] Set Your Name: When you initialized service you set a name for yourself. This name is presented in Contact Invitations.
Changing your name will not impact invitations already sent but will be reflected in future invitations.
] Auto Accept Invites: If you do not want to pre-screen all additions to your PTT Contacts you can use this menu item to automatically accept your invitations.
• Enable All automatically accepts all invitations.
• Contact Only automatically accepts individual invitations.
• Group Only automatically accepts group invitations.
• Disable All allows you to pre-screen all invitations.
] PTT is On/PTT is Off: This menu item allows you to turn your PTT Service off or turn it on.
Pending Invitations
Menu 1.5
This menu item only displays if you have invitations which have been waiting for your review. Selecting this menu item displays a list of invitations pending. Invitations not disposed of within 7 days will expire.
Public Group Service vs
Corporate Group Service
The PTT Service which is described above is called Public Group Service. General users like you can add/delete contact that you want to
PTT and create Group. Whereas, PTT service that is controlled by one administrator in a corporate environment in order to control a person or group to PTT is called Corporate
Group Service.
Administrator can handle centralized corporate contact management via the Push to Talk
43
CU515_Eng_0919 9/19/07 4:43 PM Page 44
Push to Talk (PTT)
Corporate Administrator website. Contact your business sales representative, or www.cingular.com/ptt for more information.
The followings are different functions from
Public Group Service.
Adding a Individual Member (notification when done by the administrator)
• Assume this message appears on the handset of the person who has had an individual contact pushed to his/her phone.
• User Message: <Contact Name> has joined Your Contact List
Adding a Group Member (notification when done by the administrator)
• Assume this message appears on the handset of the person who has had a group contact pushed to his/her phone.
• User Message: <Contact Name> has joined <Group Name>
Deleting an Individual Member (by user)
• This function is not supported. Please contact your Corporate Administrator.
Deleting a Group Member (by user)
• This function is not supported. Please contact your Corporate Administrator.
44
Deleting an Individual Member
(notification, when done by the administrator)
• Assume this message appears on the handset of the person who has had an individual contact deleted from his/her phone by the administrator.
• User Message: < Contact Name > has deleted you from their PTT Contacts.
Deleting a Group Member (notification, when done by the administrator)
• Assume this message appears on the handset of the person who has had a group member deleted from his/her phone by the administrator.
• User Message: <Group member> was deleted from <Group name>.
Deleting a Group (notification, when done by the administrator)
• Assume this message appears on the handset of the person who has had a group member deleted from his/her phone by the administrator.
• User Message : <Group Name> has been deleted from your PTT Contacts.
CU515_Eng_0919 9/19/07 4:43 PM Page 45
Messaging
This menu includes functions related to SMS
(Short Message Service), MMS (Multimedia
Message Service), voice mail, as well as the network’s service messages.
New Message
Menu 2.1
n Note
If you select a graphic or an audio file while writing a multimedia message, the file loading time will take about 5 seconds. You will not be able to activate any key during the file loading time. When the file loading is complete, you will be able to write a multimedia message.
Editing a message
The following options are available for Editing a Message. (Press the left soft key [Insert])
] Symbol: You can insert symbols ranging from sentence notes to emoticons. Select the one you want by navigating the left/right soft keys [Previous/Next].
] Graphic: You can select a graphic image by using the left/right navigation keys. You can preview the selected picture by pressing the left soft key [View].
] Audio: You can insert various ringtones.
n Note vCard, vCalendar, vNote and vTask are created by
Address Book, Calendar, Notepad and Tasks respectively. Go to the Tools and Address Book sections for more detailed information.
] Video: You can insert a video clip by using the center key [Insert].
] New Photo: You can insert a new image taken from the camera by pressing
[Capture]. The following camera options are available when you press [Options]:
• Resolution: The resolution of the image can be captured in 1280*960/640*480/
320*240/160*120.
• Quality: The quality of the captured image can be Super Fine/Fine/Normal.
• Primary Storage: You can assign the primary storage to Handset or Memory
Card.
• View Full Screen: Extends the photo screen to full.
• Self Timer: Camera timer can be set to
Off/ 3 Seconds/5 Seconds/10 Seconds.
• Advanced Settings: Set the White
Balance as Auto/Daylight/
Incandescent/Cloudy/Fluorescent/
45
CU515_Eng_0919 9/19/07 4:43 PM Page 46
Messaging
Night mode. Color Effects includes options such as Color/ Sepia/
Mono/Negative. Shutter Tones can be set to Tone 1/ Tone 2/ Tone 3/ Off.
• Default Settings: Allows you to set to the default settings.
] New Audio: You can record a new audio by pressing the center key [Record]. After recording a new audio, you can cancel it by pressing the right key [Cancel]. To control the new audio menu, choose [Options] by pressing the right key. Under [Options], choose one of following
• Quality: Set the audio’s quality to Fine,
Normal or Economy.
• Primary Storage: You can assign the primary storage to Handset or Memory
Card.
] New Video: You can record new video by pressing the center key [Record].
] Subject: Type a subject into the message.
] Others: Allows you to insert vCard, vCalendar, vNote or vTask.
] Template
- Text: You can easily insert the frequently used sentences in the text message.
46
- Multimedia: The preset multimedia templates are available.
- Signature: Input your own signature created in (Menu 2.9.3). For further details, see page 55.
] Contact: You can browse one of your contacts and insert it.
] Slide: You can insert a slide and place it to
Insert Slide Before or Insert Slide After.
Using Options
Press right soft key [Options].
• Preview: Shows the created multimedia message before sending it. (Only for
Multimedia Message)
• View Attachment: Shows he attached multimedia files. (Only for Multimedia
Message)
• Save to Drafts: Saves the selected message to draft.
• Remove: Removes the selected multimedia or vObject. (Only for
Multimedia Message)
• Select Slide: If the message has more than one slide, you can select and move to the desired slide. (Only for Multimedia
Message)
CU515_Eng_0919 9/19/07 4:43 PM Page 47
Messaging
• Set Slide: Sets the Duration, Text color and background color of the selected slide.
(Only for Multimedia Message)
• Settings (Only for Multimedia Message)
- Priority: You can set the priority of the message you choose.
- Validity Period: This network service allows you to set how long your multimedia messages will be stored at the message center.
- Delivery Receipt: If it is set to On in this menu, you can check whether your message is sent successfully.
- Request Read Receipt: This menu allows you to determine whether to request a read confirmation mail to a recipient.
• Text Entry Mode: Sets the text input mode. For more details, refer to Entering
Text (page 21).
• Text Entry Settings: Text Entry Languages allows you to set the text entry language to English, Spanish or French. T9 Next
Word Prediction is available when it is set to On. Use T9 Dictionary to add words or delete/reset/modify words.
• Cancel: Allows you to exit the text input mode without saving your input message.
Sending a Message
After completing a message using the
Insert/Options, select Send To to send a message.
• Enter the recipient(s) as To, Cc and Bcc. You can use the Contacts option to choose a recipient.
• Press the right soft key [Options].
You can insert symbols, refer to recent messages, recent calls and caller groups to set as a recipient, and edit your message. For the
Save to Drafts, Text Entry Mode, Text Entry
Settings and Cancel options, see the descriptions above.
Inbox
Menu 2.2
You will be alerted when you receive a message. They will be stored in the Inbox. In the Inbox, you can identify each message by icons. If you are notified that you have received a multimedia message, you can download the whole multimedia message by selecting it in the Receive menu.
47
CU515_Eng_0919 9/19/07 4:43 PM Page 48
Messaging
The following [Options] are available in the
Inbox list.
] Save Contact Info: You can save the sender's phone number in the Contact List.
] Delete: You can delete the current message.
] Forward: You can forward the selected message to another party.
] Reply All: Allows you to reply to all recipients on the selected message (Only for
Multimedia messages).
] Information: You can view information about received messages; Message type,
Subject, Sender's address, Message date & time, Priority, Message size, Attached Files
(Only for Multimedia messages).
] Multi Delete: Deletes a number of messages you have selected from the folder.
] Delete All Read Messages: You can delete all read messages.
] Delete All: You can delete all messages.
IM
Menu 2.3
The Instant Messaging feature can only be used with the support of the network operator or communities such as AIM, Windows Live
48 and Y! Messenger. For Instant Messaging users, a valid User ID and Password will be required in order to login and exchange messages as well as checking the online status.
1. Through the Main Menu.
2. Through the IM hotkey (the right navigation key). Short pressing the hotkey will bring up the available IM clients. The menu items below might not appear since not all IM communities support the various options.
Also the menu strings may appear differently based on the selected IM communities. The keywords such as User ID, Login and Contact will be used as general terms in IM menus according to the currently selected communities such as AIM, Windows Live and Y! Messenger.
Offline Menu
Sign On
This allows users to login by filling in the User
ID and Password.
n Note
Once the User ID and Password are saved, you will not be required to type them in again during
Login process. This feature is optional.
CU515_Eng_0919 9/19/07 4:43 PM Page 49
Messaging
Saved Conversations
This is where a user can view saved conversations.
Settings
] Set Sound: Allows you to set on/off an alert for the Contact when they have activity on their session.
] Default Provider: Allows you to set the default IM community to login.
] Auto Sign In: You may set the automatic IM
Login process by choosing between the
’When Power On’ or ’When IM Start’ options.
] Network: You may check your IM Network
Profiles or Server Address information.
IM Information
This indicates the Instant Messaging Client
Information such as Client Name and Version
Number.
Online Menu /
1 to 1 conversation
After a successful Login, a list of contacts with
Screen Names will appear on screen.
Depending on the cursor location in the contacts, the following menu options will be available.
When cursor is located on a
Conversations List
n Note
The Conversations List contains both the active contact where a conversation has taken place as well as an unknown contact.
n Note
When you select the left/right navigation key or the Confirm key on the Conversation List, it offers the ability to view or hide conversations.
] Send to Others: This offers the ability to send a message to an unknown contact.
When selected, a User ID must be typed in prior to starting an IM session or conversation.
] Saved Conversations: You may view or delete the stored conversation session.
] Search: This allows you to search for the contact by Email address or name.
] Settings
• My Status: Allows you to set your status to Available, Busy or Invisible.
49
CU515_Eng_0919 9/19/07 4:43 PM Page 50
Messaging
• Set Sound: Allows you to set an alert for the Contact when they have activity on their session.
• Auto Sign On: You may Login to an IM client automatically with the ‘When Power
On’ or ‘When IM Start’ options.
] Log Out: This begins the Logout process.
When cursor is located on a
Conversation
] End Conversation: This closes the selected conversation. If an unknown contact was selected, that contact is deleted.
] Block/Unblock Contact: This allows you to block/unblock the selected Conversations
Contact.
] View Information: This allows you to view the User ID and Status Text information.
] Search: This allows you to search for the contact by Email address or name.
] Settings: Please refer to the previous
Settings Menu.
] Log Out: This begins the Logout process.
When cursor is located on a
Contact List
] Add Contact: This adds a new contact to the selected contacts’ list; in the meantime this searches for the contact on the basis of
E-mail Address, First Name, or Last Name.
] Refresh List: This refreshes the present information on the contacts within the contacts.
] Send to Others: This offers the ability to send a message to an unknown contact.
When selected, the User ID must be typed in prior to starting an IM session or conversation.
] Saved Conversations: This is where a user can view saved conversations.
] Search: This allows you to search for the contact by Email address or name.
] Settings: Please refer to the previous
Settings Menu.
] Log Out: This begins the Logout process.
When cursor is located on a
Contact
] Add Contact: This adds a new contact to the selected contacts list; in the meantime
50
CU515_Eng_0919 9/19/07 4:43 PM Page 51
Messaging this searches for the contact on the basis of
E-mail Address, First Name, or Last Name.
] Delete Contact: This deletes the selected
Contact.
] Block/Unblock Contact: This allows or blocks conversation with the selected
Contact.
] Refresh Contact: This refreshes the present information on the selected contact.
] View Information: This allows you to view information. It provides User ID, Status Text.
] Search: This allows you to search for the contact by Email address or name.
] Settings: Please refer to the previous
Settings Menu.
] Log Out: This begins the Logout process.
Menu options available in the
Conversation screen
] Back To List: This brings the screen back to the contacts.
] Insert: You can insert Symbol, Template and emoticons in the conversation screen.
] Block/Unblock Contact: This allows or blocks conversation with the selected
Contact.
] Save Conversation: Stores the currently active conversation.
] End Conversation: This ends the active conversation and clears the conversation buffer.
] Settings: Please refer to the previous
Settings Menu.
] Text Entry Mode: Sets the text input mode such as abc, Abc, ABC, T9 abc, T9 Abc, T9
ABC and 123.
] Text Entry Mode Settings: This selects the
T9 predictive mode Language.
n Note
•
In the conversation window, you can use the up/down navigation key for scrolling through the conversation.
•
Maximum number of characters supported by a message is 800 characters for receiving and
127 characters for sending.
• The present information might not update in real time so the “Refresh List”/“Refresh
Contact” option can be used for the most up to date status.
51
CU515_Eng_0919 9/19/07 4:43 PM Page 52
Messaging
Mobile Email
Menu 2.4
Mobile Email allows you to access your Yahoo!
Mail, AOL Mail, AIM Mail, Windows Live Mail,
AT&T Yahoo!, BellSouth Mail and Other providers accounts on your phone. So, now you can quickly and easily check your email while you’re away from your computer.
To Set Up Mobile Email
] Open Mobile Email: Slide out the keyboard, highlight Mobile Email and press OK.
] Select an Email Provider: Use the navigation key to highlight the email provider you wish to use and press OK.
] Log In
1. Highlight the ID entry field, press down on the navigation key, and then type in your existing email ID.
2. Scroll down and highlight the Password field, press down on the navigation key, and enter your password. Quick Tip: Your password is case sensitive. Press the on the keypad to change to lower case or upper case.
3. To save your password scroll down to
Remember Me and press down on the navigation key to check the box.
52
4. Select Sign In.
] Opening an Email: Just scroll down and highlight the email subject line you want to open and press down on the navigation key.
Once the email opens, just select Options to reply, forward, or delete.
] Deleting an Email: Just scroll down to the email you want to delete, press Options, then Delete.
For additional details, visit www.att.com/email
Drafts
Menu 2.5
You can view the messages saved as a draft.
The draft messages are listed with the date and time of when the messages were saved.
The following [Options] are available.
] Information: Allows you to view the information on the message.
] Multi Delete: Allows you to delete multiple messages you select from the folder.
] Delete All: Deletes all messages in the folder.
CU515_Eng_0919 9/19/07 4:43 PM Page 53
Messaging
Outbox
Menu 2.6
Outbox is a temporary storage place for messages waiting to be sent.
When you press the [SEND] key, you can make a call to the number of the recipient number of the selected message.
If the message is not sent from the Outbox, you will receive a sound alert along with a Message
Sending Fail notice on the screen.
Another attempt will be made to send the failed message and after two unsuccessful attempts, the message will no longer be sent automatically order to send the message that has failed, you must press
Resend from the Options menu.
After the maximum number of Send attempts has been reached the Send function has failed.
If you were trying to send a text message, open the message and check that the Sending options are correct.
When the message Send has failed, the following [Options] are available.
] Delete: Deletes the selected message which has failed.
] Edit: Allows you to edit the selected message.
] Error Status: Allows you to see the error status of the failed message (Only for
Multimedia message).
] Information: Allows you to view the information on the message.
] Delete All: Deletes all messages in the folder.
Sent
Menu 2.7
This is where you can view the lists and contents of sent messages and also verify if transmission was successful.
The following [Options] are available.
] Delete: Deletes the selected message from the Sent list.
] Information: Allows you to view information on the message.
] Delete All: Deletes all messages in the folder.
53
CU515_Eng_0919 9/19/07 4:43 PM Page 54
Messaging
Voicemail
Menu 2.8
This menu provides you with a quick way of accessing your voice mailbox (if provided by your network).
Before using this feature, you must enter the voice server number obtained from your service provider.
This may already be available; to check the voicemail, press and hold the key.
When new voicemail is received, the symbol will be displayed on the screen.
n Note
Please check with your network service provider for details of their service in order to configure the handset accordingly.
Templates
Menu 2.9
Text Templates
(Menu 2.9.1)
There are 6 predefined messages in the list.
You can view and edit the template messages or create new messages.
The following [Options] are available.
] Send: Allows you to send the selected template via Message.
54
] Delete: Allows you to delete the selected template message.
] Edit: Allows you to write a new message or edit the selected template message.
] Delete All: Deletes all messages in the folder.
Multimedia Templates
(Menu 2.9.2)
1. You can add new multimedia templates by pressing the left soft key [New].
2. The following choices are available under
Options.
] Preview: You can preview multimedia messages you have created.
] Remove: Removes the selected multimedia or vObject.
] Text Entry Mode: Sets the text input mode as abc, Abc, ABC, T9 abc, T9 Abc, T9 ABC and 123.
] Text Entry Settings: Text Entry
Languages allows you to set the text entry language to English, Spanish or French. T9
Next Word Prediction is available when it is set to On. Use T9 Dictionary to add words or delete/reset/modify words.
] Cancel: Allows you to exit the text input mode without saving your message.
CU515_Eng_0919 9/19/07 4:43 PM Page 55
Messaging
Signature
(Menu 2.9.3)
This feature allows you to create your Text signature. You can use symbols, text templates and contacts as part of the signature.
Message Settings
Menu 2.0
Text Message
(Menu 2.0.1)
] Message Center Number: If you want to send a text message, you can get the address of the SMS center by using this menu.
] Email Gateway: You can send the text message to an Email Address via this gateway.
] Message Subject: You can enter the SMS
Subject from this menu.
] Insert Signature: You can insert your own signature (Menu 2.9.3) that you created.
Multimedia Message
(Menu 2.0.2)
] Priority: You can set the priority of the message you choose.
] Message Subject: You can enter the MMS
Subject when this menu is on.
] Validity Period: This network service allows you to set how long your multimedia messages will be stored at the message center.
] Send Delivery Receipt: Allows you to send a delivery confirmation mail for a Multimedia
Message.
] Send Read Receipt: Allows you to send a message read confirmation mail for a
Multimedia Message.
] Download Options
- Download Without Ask: Allows
Multimedia Message to be downloaded automatically.
- Ask Always: You can download a multimedia message manually.
- Discard: Used when user reject to download Multimedia Message.
] Message Center: The details for the
Multimedia gateway are pre-loaded onto your handset and should not be changed.
55
CU515_Eng_0919 9/19/07 4:43 PM Page 56
Messaging
Voicemail
(Menu 2.0.3)
This menu allows you to set the voicemail center number if this feature is supported by the network service provider. Please check with your network service provider for details of their service in order to configure the handset accordingly.
Service Messages
(Menu 2.0.4)
You can set the Service option to determine whether you will receive service messages or not.
56
CU515_Eng_0919 9/19/07 4:43 PM Page 57
Recent Calls
You can check the record of missed, received, and dialed calls only if the network supports
Calling Line Identification (CLI) within the service area.
The number and name (if available) are displayed together with the date and time of the call. You can also view call times.
Received Calls
Menu 3.3
• View the number, if available, and call it or save it in the Address Book.
• Enter a new name for the number and save both in the Address Book.
• Send a message using this number.
• Delete the call from the list.
Missed Calls
Menu 3.1
• View the number, if available, and call it or save it in the Address Book.
• Enter a new name for the number and save both in the Address Book.
• Send a message using this number.
• Delete the call from the list.
All Calls
Menu 3.4
Allows you to view all of missed, received, and dialed call records.
Dialed Calls
Menu 3.2
• View the number, if available, and call it or save it in the Address Book.
• Enter a new name for the number and save both in the Address Book.
• Send a message using this number.
• Delete the call from the list.
Call Duration
Menu 3.5
This allows you to view the duration of incoming and outgoing calls. You can also reset the call times. The following timers are available:
Last Call
Length of the last call.
Received Call
Length of the incoming calls.
Dialed Calls
Length of outgoing calls.
57
CU515_Eng_0919 9/19/07 4:43 PM Page 58
Recent Calls
All Calls
Total length of all calls made and incoming calls received since the timer was last reset.
Data Counter
Menu 3.6
You can check the Sent, Received or All data volumes and Reset all.
58
CU515_Eng_0919 9/19/07 4:43 PM Page 59
MEdia Net
This menu shows how to access the Internet by launching the WAP browser.
MEdia Net is one of the services provided by
AT&T and it gives you access to all the cool things you can do with your wireless phone. n Note
Check the availability of WAP services, pricing and tariffs with your network operator and/or the service provider whose service you wish to use.
Service providers will also give you instructions on how to use their services.
Please contact your service provider to open an
Internet account.
To launch the browser in standby mode, press and hold down the key.
Once connected, the homepage is displayed.
The content depends on the service provider.
To exit the browser at any time, press the key. The idle screen is displayed.
Menus for the Browser
You can surf the Internet using either the phone keys or the WAP Browser menu.
Using the Navigation Keys
When surfing the Internet, the keys function differently from phone mode.
Key up/down navigation key
Description
Scroll each line of the content area
Using the WAP Browser Menu
There are various menus available when surfing the Internet.
MEdia Net Home
This connects to the homepage which is defined in the activated account. The default account connects to AT&T’s homepage.
Bookmarks
Menu 4.1
Menu 4.2
This function allows you to store and edit frequently accessed sites. The following
[Options] are available.
n Note
Your phone may have some pre-installed bookmarks for sites not affiliated with LG. LG does not warrant or endorse these sites. If you choose to access them, you should take the same precautions for security or content as you would with any site.
] View: Display the bookmark title and URL.
59
CU515_Eng_0919 9/19/07 4:43 PM Page 60
MEdia Net
] Connect: Connect to the selected bookmark site.
] New: Add a new bookmark manually.
] Edit: Modify the existing bookmark item.
] Delete: Allows you to erase the selected bookmark.
] Send URL: Allows the bookmark information to be sent via SMS to another person.
] Delete All: Allows you to erase all bookmarks.
n Note
Pre-installed bookmarks cannot be deleted or edited by users.
In order to change the text input mode for symbol input, please refer to the General Functions section.
Saved Pages
Menu 4.3
This saves the page on display as an off-line file. A maximum of 20 pages can be saved.
Enter URL
Menu 4.4
Input the URL manually to connect to the
Internet site.
Recent Pages
Menu 4.5
You can manage the list of the Internet pages you visited.
Security
Menu 4.6
A list of the available certificates is shown.
] Certificates: You can see the list of certificates and view them in detail.
] Clear Session: Removes the secure session.
Browser Settings
Menu 4.7
Accounts
(Menu 4.7.1)
This includes the network information used to connect the browser to the Internet.
Select the desired account by pressing the soft key, which is labeled as “Activate”. This will activate the account that will be used for future connection.
MEdia Net is the predefined account that is set as default.
] Activate: Select the account among the list of accounts, so it can be used for future connection.
60
CU515_Eng_0919 9/19/07 4:43 PM Page 61
MEdia Net
] View: Allows you to see the specific account information.
] Edit: Allows you to change the account information.
] Delete: Allows you to delete the account.
] New: Allows you to create a maximum of 20 new accounts.
n Note
You cannot edit and delete pre-installed accounts.
In order to create a new account, please fill in the network information.
1. Account Name: Name associated with new account.
2. Homepage: Homepage URL.
3. Connection Mode: Select from TCP with
Proxy, TCP without Proxy, UDP(CO), UDP(CL).
4. Proxy Address: Proxy server address.
5. Proxy Port Number: Proxy server’s port number.
6. Security: Select the secure or non-secure mode.
7. Time Out: Values between 10 to 600 seconds.
8. Network Profile: You can choose one from the network profiles. Note you can create a new network profile by selecting the list option on the center key.
n Note
1. The account information will be available from your operator.
2. Creating or editing an account requires care.
The browser cannot connect to the Internet if the account information is not correct.
Primary Storage
(Menu 4.7.2)
You can assign the primary storage to
Handset or Memory Card.
Cache Settings
(Menu 4.7.3)
The web pages you have accessed are stored in the memory of the phone.
] Clear Cache: Remove all cached data in the memory.
] Allow Cache: Set a value to determine whether a connection attempt is made through the cache or not.
n Note
A cache is a buffer memory, which is used to store data temporarily, especially when it is online.
61
CU515_Eng_0919 9/19/07 4:43 PM Page 62
MEdia Net
Cookie Settings
(Menu 4.7.4)
The information or services you have accessed are stored in the cookie.
] Delete Cookies: Remove all cookies.
] Allow Cookies: Set a value to determine whether a connection attempt is made through the cookie or not.
Character Encoding
(Menu 4.7.5)
Select a character set from the following list:
1 Automatic 2 English(ASCII)
3 English(ISO) 4 English(LATIN)
5 Unicode(UCS2 BE) 6 Unicode(UCS2 LE)
7 Unicode(UCS2 Auto) 8 Unicode(UTF-16 BE)
9 Unicode(UTF-16 LE) 0 Unicode(UTF-16 Auto)
* Unicode(UTF-8)
Scrolling Control
(Menu 4.7.6)
This allows you to determine the scroll speed and select from 1 Line, 2 Lines or 3 Lines.
Show Image
(Menu 4.7.7)
This allows you to view pictures when browsing.
AuthWallet
(Menu 4.7.8)
If set to On, the user’s personal information such as ID and Password used to access the
Internet site will be saved automatically for future use.
Online menu
Once you are connected to the Internet, the following menu options are available:
] Back: Moves to the previous page.
] Forward: Moves to the next page.
] Refresh: Loads the current page again.
] Home: Moves to the initial homepage.
] Enter URL: Connects to the specific URL after editing.
] Recent Pages: You can manage the list of the Internet pages you visited.
] Bookmarks: You can add or save the current page to Bookmark or view the list saved under Bookmark.
] Settings: You can set browser related options such as Clear cache, Clear cookies, etc.
62
CU515_Eng_0919 9/19/07 4:43 PM Page 63
AT&T Mall
Shop Tones
Menu 5.1
This menu option connects to AT&T’s ringtone download site.
n Note
Additional charges may incur when downloading ringtones. Contact your service provider for further information.
Shop Multimedia
This allows you to connect to AT&T's multimedia download site.
Menu 5.4
n Note
Additional charges may incur when downloading multimedia contents. Contact your service provider for further information.
Shop Games
Menu 5.2
This menu option connects to AT&T’s game download site. This allows users to download the various games by connecting to the
Internet. n Note
Additional charges may incur when downloading games. Contact your service provider for further information.
Shop Applications
Menu 5.5
This menu option connects to AT&T’s application download site. This allows users to download the various applications by connecting to the Internet. n Note
Additional charges may incur when downloading applications. Contact your service provider for further information.
Shop Graphics
Menu 5.3
This menu option connects to AT&T’s graphic download site.
n Note
Additional charges may incur when downloading graphics. Contact your service provider for further information.
MEdia Net Home
Menu 5.6
This connects to the homepage. The homepage is the site which is defined in the activated account.
63
CU515_Eng_0919 9/19/07 4:43 PM Page 64
Cellular Video
Cellular Video (CV) brings you quick, ondemand access to crystal clear news, sports, weather and entertainment video clips. Catch up on TV’s hottest shows, funniest comedians, biggest headlines and latest sports scores. You can even personalize your homepage for quick access to your favorites. In addition, the CV service automatically streams localized weather information to your personalized
“News & Weather” page each and every day.
To access CV:
1. From standby mode, press the Left Soft Key to access the Menu.
2. Scroll to and select CV (option 6).
3. Select a category and play a clip.
64
CU515_Eng_0919 9/19/07 4:43 PM Page 65
My Stuff
Games
Menu 7.1
Java is a technology developed by Sun
Microsystems. Similar to the way you would download the Java Applet using the standard
Netscape or MS Internet Explorer browsers,
Java MIDIet can be downloaded using a WAP enabled phone. Depending on the service provider, Java based programs such as Java games can be downloaded and run on a phone.
Once downloaded, the Java program can be viewed within the Games menu where you can select, execute or delete. Java program files saved in the phone or memory card are in .JAD
and .JAR formats.
n Note
The JAR file is a compressed format of the Java program and the JAD file is a description file that includes all detailed information. From the network, prior to download, you can view all detailed file descriptions from the JAD file.
n Warning
Only J2ME (Java 2 Micro Edition) based programs will run in a phone environment.
J2SE (Java 2 Standard Edition) based programs will only run in a PC environment.
] Shop Games: This menu option connects to
AT&T’s game download site.
] Games List: You can see the default and downloaded games in the list.
Applications
Menu 7.2
This menu displays the list of Java programs downloaded using WAP. All previous downloaded programs can be selected, deleted, or viewed in detail within the
Application menu.
] Shop Applications: This menu option connects to AT&T’s application download site.
] Applications List: You can see the downloaded applications in the list.
AT&T Music
Menu 7.3
Music Player
(Menu 7.3.1)
] All Songs: You can view the entire playlist in the internal/external memory.
] Playlists: You can create your own playlists by choosing songs from the All Songs menu list.
65
CU515_Eng_0919 9/19/07 4:43 PM Page 66
My Stuff
] Artists: Shows the list of artists of all the songs in internal/external memory, and shows the song of chosen artist.
] Albums: Shows the list of albums of all the songs in internal/external memory, and shows the song of chosen album.
] Genres: Shows the list of genres of all the songs in internal/external memory, and shows the song of chosen genre.
n Note
Copyrights of music files may be protected by copyright and intellectual property laws.
Therefore, it may be required to obtain necessary permissions or licenses before you can reproduce or copy the materials. In some countries, national law prohibits copying of copyrighted materials for personal archive as well. Prior to downloading or copying the files, please ensure that you adhere to the applicable laws and laws of corresponding countries or regions regarding the Terms of Use of materials.
Playing Music
To listen to music that you have transferred to your phone, follow these quick easy steps:
Playing Music with the Flip Open
1. Press the Menu 7->3, select Music
Player (1), then All Songs (1) or
Playlists (2). Select a song or playlist.
2. Press to play/pause. Press up or
down on the Navigation Key to change the volume, and left or right to go to the previous or next song.
3. Press the Left Soft Key for Minimize to access other phone functionality while music is playing.
4. Press the key to browse for a song or playlist again.
Adding Music To Your Handset
Before You Get Started
To transfer music from your PC to your device, you will need the following:
• Windows Media Player 10 or above
• Music on your PC in one of these formats:
MP3, .AAC, AAC+ or WMA
66
CU515_Eng_0919 9/19/07 4:43 PM Page 67
My Stuff
• A MicroSD card (supports up to 4GB cards)
• USB data cable
*microSD card and USB data cable sold separately; go to att.com/wireless n Note
Music stores may require other software to be downloaded and separately installed or see User
Guide for use of Windows Explorer to drop and drag tracks from you computer to phone.
n Warning
Do not disconnect phone while the transfer is in progress. n Note
Not compatible with iTunes and/or iTunes files.
Drag and Drop Music Using CU515 As A
Mass Storage Device
1. Insert a MicroSD memory card.
2. Power on the phone.
3. Connect the device to a PC using a CU515
USB data cable.
4. A bubble may appear, "Found New Hardware
LG USB Modem".
5. Access My Computer on the PC.
6. The phone's memory card will be listed under
"Devices with Removable Storage" in the same location as an optical drive.
n Note
The PC will automatically assign a drive letter.
7. File explore in a new window for desired music files.
8. Drag and drop the desired music content from the PC window to the "Storage Card" window.
9. Disconnect the device from the cable.
10. Access the Music Player on the phone.
n Note
Sideloading is not supported via Bluetooth.
n Note
If the target computer does not detect the newly connected handset as Mess Storage, please follow steps 11 - 16.
11. When the Idle screen displays, press the
Menu soft key.
12. Select Settings and press the Select soft key or the [OK] key.
13. Select Connection and press the Select soft key or the [OK] key.
67
CU515_Eng_0919 9/19/07 4:43 PM Page 68
My Stuff
14. Use the Up or Down Navigation key to highlight Select USB Connection Mode and press the Select soft key or the [OK] key.
15. Use the Up or Down Navigation key to highlight Mass Storage and press the Select soft key or the [OK] key.
16. Reconnect the device to a PC.
Adding Music to your Handset
Music files can be added to your handset by using one or more of the following methods:
• Download music and ringtones over the AT&T network directly to your device by using the shopping for music feature.
• From your existing digital media collection thru Windows Media Player ® .
• From music stores through the applicable music client.
Transferring Music from the Digital Music
Stores
In order to download music from the computer to your phone, handset, a microSD card and
USB data cable are required. These items are sold separately; go to att.com/wireless
1. Using your computer, open your preferred
WMDRM PC music management client.
2. Download the selected song to your library.
3. Insert the microSD card into the handset.
4. Use the USB adapter cable to connect the handset to the target PC. When you try to connect handset on your PC, the handset displays “Connecting as Music Sync...”
5. Once the USB connection has been established, the handset displays " Connected as Music Sync Mode. Do not disconnect during transfer. " and the computer screen then shows the CU515 device. If the detection occurs, skip to step 11. n Note
If the target computer does not detect the newly connected handset or provide an MTP Player dialog window on the PC screen, please follow steps 6 - 10.
6. When the Idle screen displays, press the
Menu soft key.
7. Select Settings and press the Select soft key or the [OK] key.
8. Select Connection and press the Select soft key or the [OK] key.
9. Use the Up or Down Navigation key to highlight Select USB Connection Mode and press the Select soft key or the [OK] key.
68
CU515_Eng_0919 9/19/07 4:43 PM Page 69
My Stuff
10. Use the Up or Down Navigation key to highlight Music Sync and press the Select soft key or the [OK] key.
11. Highlight the song you wish to download to the handset.
12. Using your right mouse button, click on the highlighted song and select Transfer Track(s) to Portable Device from the drop-down menu. This step begins the download process.
Transferring Music using Windows Media
Player
A USB cable, microSD card, and a current version of the Windows Media Player are required for this procedure.
1. Open Windows Media Player on your computer (version 10.0 or higher).
2. Use the USB adapter cable to connect the handset to the target PC. When you try to connect handset on your PC, the handset displays “Connecting as Music Sync...”
3. Once the USB connection has been established, the handset displays " Connected as Music Sync Mode. Do not disconnect during transfer. " and the computer screen then shows the CU515 device.
n Note
If the target computer does not detect the newly connected handset or provide an MTP Player dialog window on the PC screen, please follow steps 6 - 10 from the previous "Transferring
Music from the Digital Music Stores" on page.
4. From within the Windows Media Player application, click on the Sync tab. Previously downloaded songs are then listed on the left side of the application.
5. Choose the destination location for the media files. The CU515 Music Sync Player appears in a drop-down list on the right side of the screen. n Note
If there are no items present in the playlist, click the Edit Playlist button and begin adding the music files from among the various media categories.
6. Click on the checkmark boxes (to the left of the song entry) to select the song you want to synchronize to your handset.
7. Click the Start Sync button at the upper right corner of the application to download the selected songs to your handset. A
“synchronization in progress” message appears on the application. Do not unplug
69
CU515_Eng_0919 9/19/07 4:43 PM Page 70
My Stuff the handset during this process. Once complete, a Music folder appears below the
CU515 Music Sync Player on the right of the
Sync tab.
8. It is now safe to unplug the USB connector from the handset.
Importing a Playlist from a 3rd Party
Application
1. Open Windows Media Player on your computer (version 10.0 or higher).
2. Use the USB adapter cable to connect the handset to the target PC. When you try to connect handset on your PC, the handset displays “Connecting as Music Sync...”.
3. Once the USB connection has been established, the handset displays " Connected as Music Sync Mode. Do not disconnect during transfer. " and the computer screen then shows the CU515 device.
n Note
If the target computer does not detect the newly connected handset or provide an MTP Player dialog window on the PC screen, please follow steps 6 - 10 from the previous "Transferring
Music from the Digital Music Stores" .
4. From within the Windows Media Player application, click on the Library tab.
70
5. From the left side of the Library tab, click on
All Music. The right side of the page is then populated with all of the songs which the player has previously found.
6. Right click on the song entry and select, Add to.. > Additional Playlists.
7. From the Add to Playlist dialog, click the New button and type in a unique playlist name.
8. Click OK when you are done entering the new playlist name. The new Windows Media playlist is then displayed within the My
Playlist section of the Library tab (left side).
9. Drag and drop the newly created playlist from the My Playlist section to the phone Music
Sync Player listed just above it. The phone
Music Sync Player appears on the left side of the screen.
n Note
If there are no items present in the playlist, click the Edit Playlist button and begin adding the music files from among the various media categories.
10. It is now safe to unplug the USB connector from the handset.
CU515_Eng_0919 9/19/07 4:43 PM Page 71
My Stuff n Note
1. If you connect your handset with a Specific USB
Hub on your PC, the above music sync service will not work. So we recommend a direct USB
Connection on your PC rather than HUB.
2. Once you connect your mobile phone to the
PC, the phone's screen will display the
"Connecting as Music Sync..." message. If the message does not change to "Connected as
Music Sync Mode. Do not disconnect during transfer.", check if your PC is running Windows
XP and Windows Media Player 10 or later. If your PC is running Windows XP and Windows
Media Player 9, please download WMP10 or
WMP11 by visiting Microsoft site. If your PC is running XP and WMP10 or later but
"Connecting as Music Sync..." message does not disappear from the screen after you have tried to establish connection three to four times, perform one of the following methods and try again.
Be aware that all of the existing data will be erased on microSD card if you use the below process.
A. Follow those steps: settings->reset settings-
>Clear Memory->memory card.
B. Format external memory using Mass
Storage.
C. Remove external memory from the phone, and insert external memory to the phone and format.
3. If you have connected your handset to PC, and trying to send file using Music sync, but the function is not working properly, please check the below lists.
A. Check whether the file length you are transmitting is not too long.
B. Check whether license of the file you are transmitting is not expired.
C. Check whether the file you are transmitting is the correct format for your phone (MP3,
WMA, AAC).
If you have checked the above three lists, and still the file is not transmitted, please try the actions on 2.
4. If you transfer files as shown below, the transferred files will not show in a third party application or in Windows Media Player.
A. Transmitted a file using Mass Storage, but not using Music sync function.
B. Transmitted a file by directly inserting external memory on PC.
5. When you have transferred files with Music
Sync feature and you want to delete them from your phone, you should connect the phone to your PC again with Music Sync to delete them. Even if you have deleted files transferred with Music Sync feature as shown below, delete them again with Music Sync.
Otherwise you will not be able to transfer files identical to the deleted files again.
71
CU515_Eng_0919 9/19/07 4:43 PM Page 72
My Stuff
A. Deleted a file using Mass Storage, but not using Music sync function.
B. Deleted a file by directly inserting external memory on PC.
C. Deleted a file using delete function on the phone.
Shop Music
(Menu 7.3.2)
Selecting Shop Music from the AT&T Music sub menu launches the browser to a music landing page from which you can purchase music from 3rd party stores and personalization content from AT&T. Some sites are data intensive (i.e. previews via streaming) so the user should have an unlimited MEdia bundle like the MEdia Max 200.
n Note
Additional charges may incur when downloading ringtone.
Contact your service provider for further information.
MusicID
(Menu 7.3.3)
MusicID is an application which uses the onboard microphone to analyze a song sample and then compare it to a remote database of songs. Once the application completes the analysis of the song sample, it then provides you with the name of the song, artist and album art as well as opportunities to buy related content.
] ID song!: Allows you to find out information of unknown music by sending the sound of the unknown music to the web. If the web identifies the song, it returns with relevant information of the song.
] manage IDs: Once a song has been identified through the MusicID, you can see the list of songs in this folder.
] help me out: Information for how to use this java application.
] exit: Ends the application and exits.
72
CU515_Eng_0919 9/19/07 4:43 PM Page 73
My Stuff
XM Radio
(Menu 7.3.4)
Selecting XM Radio from the AT&T Music sub menu launches a preinstalled java application.
The application allows the user to listen to dozens of channels of digital radio on your mobile phone. Get unlimited access to commercial-free music, the latest Hip Hop,
R&B, Rock, Jazz, Country anywhere you go.
Warning: This product will use a large amount of data and you are responsible for all data charges incurred. AT&T strongly recommends that you subscribe to a MEdia Max data bundle
IN ADDITION to this purchase. Call AT&T at
611 to sign up for the MEdia Max package if needed.
Music Videos
(Menu 7.3.5)
Selecting Music Videos from the AT&T Music sub menu launches a browser which takes you directly into the Music Video section of Cellular
Video. From this menu, you will have access to music videos from the latest artist as well as programming from AT&T, MTV,VHI, and CMT among others. Simply click on a video and begin watching!
n Note
Additional charges may incur when downloading music video contents.
Contact your service provider for further information.
The Buzz
(Menu 7.3.6)
Selecting The Buzz from the AT&T Music sub menu launches a preinstalled java application
(e.g. Billboard). The application allows the user to obtain relevant music industry news and information including charts, news, and concert locations.
Community
(Menu 7.3.7)
Selecting Community from the AT&T Music sub menu launches the browser to either one or more of the hot user communities. The application allows the user to interact with their friends and the community as well as review artist fan sites.
Music Apps
(Menu 7.3.8)
Selecting Music Apps from the AT&T Music sub menu launches the browser to an area where the user can purchase music related applications for download.
73
CU515_Eng_0919 9/19/07 4:43 PM Page 74
My Stuff
Audio & Ringtones
Menu 7.4
] Shop Tones: This menu option connects to
AT&T’s ringtone download site.
] Record Voice: You can record your own audio by pressing the center key [OK].
] Files: You can view the audio files in the list.
Video
Menu 7.6
] Record Video: You can record your own video by pressing the center key [OK].
] Files: You can view the video files in the list.
n Note
DRM (Digital Rights Management) Contents
Copyright protected contents.
DRM sometimes restricts some functions, such as send, and edit. The indicates content controlled by DRM protection.
Graphics
Menu 7.5
] Shop Graphics: This menu option connects to AT&T’s graphic download site.
n Note
Additional charges may be incurred when downloading graphics. Contact your service provider for further information.
] Take Photo: You can take your own photo by pressing the center key [OK].
] Make Animated GIF: You can make an animation file with the selected images in the list.
] Files: You can view the graphic files in the list.
Tools
Menu 7.7
Alarm Clock
(Menu 7.7.1)
The alarm function allows you to set up multiple separate alarms. You can also set the time, repetition interval and alarm sound.
Select your desired alarm setting to configure from the alarm list. If there is no alarm setting, press the left soft key [New] to add a new alarm.
] Time: Select the desired set time mode using the navigation key. Input your desired alarm time by specifying the hour and minute. If the time is in 12 hour clock format, you have to select either am’ or pm’ using the center soft key.
74
CU515_Eng_0919 9/19/07 4:43 PM Page 75
My Stuff
] Repeat: Select the desired repeat mode using the navigation key.
] Alarm Tone: Select the alarm sound to use for the alarm using the key.
] Memo: Input alarm name.
Calendar
(Menu 7.7.2)
When you enter this menu a calendar will be displayed. The square cursor is used to locate a particular day. The bottom bar on the calendar indicates schedule(s) for that day. This function helps to remind you of the schedule.
The phone will sound an alarm tone if it has been set for a specific schedule item.
Key Description up/down navigation key Weekly left/right navigation key key/ key key/ key
Daily
Annually
Monthly
The following [Options] are available:
] Search: Allows you to search the saved schedule(s) by pressing the character keys.
] Delete: Allows you to delete the selected schedule.
] Send via: Sends the selected schedule by
Message or Bluetooth.
] Set Holiday: Allows you to set your personal holiday for the selected date.
] View All: Allows you to view all saved schedules.
] Go to Date: Allows you to jump to a specific date.
] Delete Schedules: Deletes the defined schedules such as Old Schedules or All
Schedules.
Notepad
(Menu 7.7.3)
You can create up to a maximum of 30 memos.
1. Select a memo pad you want to edit.
2. Press the left soft key [New] to create a new memo.
3. Input the memo and press the center key
[Save] to save.
Calculator
(Menu 7.7.4)
The calculator function allows you to add, subtract, multiply and divide. You can input numbers using the number keys, and input operators using the up, down, left, and right navigation keys.
You can input a decimal point by pressing the
[Star] key.
75
CU515_Eng_0919 9/19/07 4:43 PM Page 76
My Stuff
Whenever you press the key, characters are sequentially deleted in reverse order.
Tip Calculator
(Menu 7.7.5)
This feature allows you to quickly and easily calculate the tip amount based on the total bill as well as the split of the total bill based on the number of people.
World Clock
(Menu 7.7.6)
The World clock function provides time information on major cities worldwide.
1. You can select a desired city as a base using the left soft key [Map].
2. You can view the time of desired city using the right soft key [Options] - [Change City].
Tasks
(Menu 7.7.7)
This feature allows you to save and manage a task.
1. To add a new To do item, select the left soft key [New] in the Task enquiry screen.
2. Input due date, notes, priority and status for the new Task.
3. Press the left soft key [Save] to save the
Task item.
The following [Options] are available in the
Task list.
76
] Status: Allows you to change the status of the selected task as In Progress or
Completed.
] Delete: Deletes the selected task.
] Send Via: Enables the selected task to be sent via Message and Bluetooth.
] Edit: Allows you to edit a saved task.
] View Calendar: The calendar pop-up window is displayed.
] Delete Tasks: Deletes All Completed, All
Past Tasks or All Tasks.
Stop Watch
(Menu 7.7.8)
This menu allows you to record the elapsed time of an event. The duration of an individual lap time (up to 20 times) and the total time can be displayed.
] New Time
1. To start timing, press the center key
[Start]. The running time is displayed as
HH.MM.SS.hh (hours, minutes, seconds, hundredths of a second).
2. During the timing, you can record an individual lap time by pressing the right soft key [Lap]. Up to 20 lap times can be recorded.
CU515_Eng_0919 9/19/07 4:43 PM Page 77
My Stuff
3. You can stop or restart timing by pressing the key.
4. To reset the stop watch, press the left soft key [Reset].
] Saved Times: You can see the saved recorded times which are in the lap time list of the New Time option.
Unit Converter
(Menu 7.7.9)
This function converts any measurement into a unit you want.
There are 6 types of units that can be converted: Area, Length, Weight, Temperature,
Volume, and Velocity.
n Note
You can input a decimal number by pressing the
[Star] key.
Date Finder
(Menu 7.7.0)
The date finder shows the start date, the target date and the number of remaining days.
D-Day Counter
(Menu 7.7.*)
1. To add a new D-Day Counter item, select the left soft key [New].
2. Input the Date and notes when you add an item.
3. Press the left soft key [Save] to save the item.
] Edit: You can edit the selected item.
] Delete: You can delete the selected item.
] Show at Idle Screen: You can see the
Remaining days for this item (D-Day) on the
Idle screen top right corner.
] Delete All: Deletes all saved items.
Camera & Recordings
Menu 7.8
Take Photo
(Menu 7.8.1)
Using the camera module built into your phone, you can take pictures of people or events while on the move. Additionally, you can send photos to other people in a picture message. The right soft key [Options] will bring up the following options.
] Change to Video Mode: Go to the video application, enables you to record a video clip.
] Video Share: You can make a Video Share
Call. For more details, refer to ‘Video Share
Calling’ (page 28).
] Resolution: Sets the image size to
1280*960 (default), 640*480, 320*240 or
160*120. The selected image size appears on the capture screen.
77
CU515_Eng_0919 9/19/07 4:43 PM Page 78
My Stuff
] Quality: You can select the desired quality of photo by selecting either Super Fine, Fine or
Normal mode by using the navigation keys.
] Primary Storage: You can assign the primary storage to Handset or Memory Card.
] View Full Screen/Image: Allows you to view the subject in full screen or full image.
n Note
When user takes a picture as Full Image, wallpaper will be shown as full image, while it will display as Full screen after setting the wallpaper on it if user takes a picture using Full screen mode.
] Multishot: This feature enables the amount of continuous frames that can be taken at one time. The number of frames is determined by the image size setting.
] Self Timer: Determines the camera timer.
] Advanced Settings
- White Balance: This adjusts the Light
Effect level and you can select from the following options: Auto / Daylight /
Incandescent / Cloudy / Fluorescent / Night mode
- Color Effects: Allows you to apply special effects to the picture. Press the left or right navigation key to find the tone you want to use from the following options: Color,
Sepia, Mono and Negative.
- Shutter Tones: Allows you to select a sound when you press the shutter. Tone 1 /
Tone 2 / Tone 3 /Off
] Default Settings: This restores the default camera settings (Size, Brightness, Zoom, etc.).
n Note
In Take Photo mode, you can adjust the zoom scale by using the up/down navigation keys. The maximum zoom scale depends on the resolution as follows.
Resolution Zoom scale
1280*960
640*480
Level 1
Level 1~Level 20
320*240
160*120
Level 1~Level 20
Level 1~Level 20
In Take Photo mode, you can adjust the brightness by using the left/right navigation key.
78
CU515_Eng_0919 9/19/07 4:43 PM Page 79
My Stuff n Note
• Zooming: You can zoom in/out using the up/down navigation keys except
1280*960(default phone setting).
• Brightness: You can adjust the brightness level of the screen using the left/right navigation keys and there are 9 level of setting.
[Internal Display]
Brightness
Zooming
[Internal Display]
Record Video
(Menu 7.8.2)
You can record a video clip in this menu by pressing the Camera key. Before starting to record, press the right soft key [Options] to set the following values. Select the desired value and press the key to confirm.
] Change to Photo Mode: Go to the camera application which enables you to take a still picture.
] Video Share: You can make a Video Share
Call. For more details, refer to ‘Video Share
Calling’ (page 28).
] Video Record Mode: Sets the recording mode to either MMS Video Mode, Video
Share Mode or General Mode.
] Quality: Determines the quality of a video clip.
] Primary Storage: You can assign the primary storage to Handset or Memory
Card.
] White Balance: This adjusts the light effect level and you can select from the following options: Auto / Daylight / Incandescent /
Cloudy / Fluorescent/ Night mode.
] Color Effects: Allows you to apply special effects to the video clip. Press the Left/Right
79
CU515_Eng_0919 9/19/07 4:43 PM Page 80
My Stuff
Navigation Keys to find the tone you want to want to use from the following options:
Color, Sepia, Mono and Negative.
] Default Settings: This restores the default camera settings (Size, Brightness, Zoom, etc.).
n Note
In Video Record mode, you can adjust the zoom scale by using the up/down navigation keys. The maximum zoom scale depends on the resolution as follows.
Resolution
176*144
Zoom scale
Level 1~Level 20
In Record Video mode, you can adjust the brightness by using the left/right navigation keys.
Record Voice
(Menu 7.8.3)
You can record an audio clip in this menu. The recorded audio file is saved automatically in the Audio & Ringtones menu (Menu 7.4).
The right soft key [Options] will bring up the following options.
] Record Mode: Sets the recording mode to either MMS or General.
] Quality: Determines the quality of an audio clip.
80
] Primary Storage: You can set the primary storage of the recorded audio to the Handset or the memory Card.
Other Files
Menu 7.9
When you receive files of an undefined format
(such as .vcs, .vcf, etc.) via E-mail, the files are saved in this folder.
The following [Options] are available.
] Delete: You can delete the selected file.
] Rename: You can edit the name of the selected file.
] New Folder: You can create a new folder.
] Sort By: You can sort the folders by name, date and type.
] Delete All: You can delete all files.
] Multi Delete: You can delete several files at once.
] Information: You can view information about the selected folder.
Memory Card
Menu 7.0
This function shows the status of the external microSD card memory.
CU515_Eng_0919 9/19/07 4:43 PM Page 81
Address Book
Contact List
Menu 8.1
This menu allows you to save and manage contact address information. The Contacts’ functions allow you to add a new address or search saved contact addresses by name.
Speed Dial List
Menu 8.4
This menu allows you to configure the speed dial numbers. You can select a number from 2 to 9 as a speed dial. You can configure speed dial numbers for any of the 8 numbers for a specific contact address so that a contact address may have multiple speed dial numbers.
New Contact
Menu 8.2
This menu allows you to add a new contact address. You can enter contact address information including name, phone numbers, email addresses, group information items, memos, ring tones, and image (photograph).
You have to select the Handset or the
SmartChip memory using the left and right navigation keys.
Caller Groups
Menu 8.3
This menu allows you to manage group information. By default, there are 4 groups: family, friends, colleagues and school. You can also configure a ring tone for a group so that the group ring tone sounds when a call from a specific contact address within that group arrives and there is no ring tone configured for the specific contact address.
Copy All Contacts
Menu 8.5
This menu allows you to copy all of the information from your SmartChip, e.g. name, handset number, etc., to your handset. If a name is duplicated during the copying operation, the information is also duplicated.
] SmartChip to Handset: You can copy the entry from the SmartChip card to the phone memory.
] Handset to SmartChip: You can copy the entry from the handset memory to the
SmartChip card (not all the data will be copied).
81
CU515_Eng_0919 9/19/07 4:43 PM Page 82
Address Book
Delete All Contacts
Menu 8.6
You can delete all entries in the SmartChip and the Handset.
Press the [END] key to return to standby mode.
View Options
Menu 8.9
You can select different options by which to display names in your address book: Handset &
Smartchip, Handset Only or Smartchip Only.
My Numbers
Menu 8.0
This displays your phone numbers stored in the
SmartChip.
Service Dial Numbers
Menu 8.7
You can view the list of Service Dialing
Numbers (SDN) assigned by your network provider. Such numbers could include the emergency, directory assistance and voice mail numbers.
1. Select the Service dial number option.
2. The names of the available services will be shown.
3. Use the up/down navigation keys to select a service. Press the [SEND] key.
My Business Card
Menu 8.8
This option allows you to make your own name card. Key in the Name, Mobile number, Office number, Fax number and E-mail address.
82
CU515_Eng_0919 9/19/07 4:43 PM Page 83
Settings
Audio & Ringtones
Menu 9.1
There can be 4 sound modes: General, Vibrate
All, Silent and Ear Mic. General, Vibrate, and
All Silent modes can be changed from the
Volume menu under Ring tone. In addition, pressing and holding the [Star] key on idle screen mode can swap Normal and Manner mode. Ear Mic is available when respective instruments are attached.
Shop Tones
(Menu 9.1.1)
Connects to AT&T Ring tone Shops.
Ringtones
(Menu 9.1.2)
Shows and plays ring tones. These can be downloaded ring tones from Ring tone shops.
Volume
(Menu 9.1.3)
This menu controls Ringtone, Key Tone, Call and Multimedia volume. It is available on Ring tone volume level 1~7.
Message Alert Tones
(Menu 9.1.4)
Allows you to select an alert tone which is played when a message is received. You can select any one from 10 message alert tones.
n Note
Full length music tracks cannot be set as ringtones.
Alert Type
(Menu 9.1.5)
] Ringtones: Supports 3 ring alert types. Ring,
Ring and Vibration, and Ring after Vibration.
] Message Alert Tones: Supports 6 message alert types. Ring Once, Ring Every 2 Min,
Ring Every 15 Min, Ring & Vibrate, Vibrate,
Silent.
] Other Alert Tones: You can elect to turn
Other Alert Tones Ring or Silent.
Key Tones
(Menu 9.1.6)
This menu option allows you to select a tone that the phone sounds when a key is pressed.
You can select an option from Beep and
Voice.
Increasing Ringtone
(Menu 9.1.7)
Allows you to select an Increasing Ringtone type which is played when a incoming call. You can elect to turn this On or Off.
Power On/Off Tones
(Menu 9.1.8)
Allows you to select a Power On/Off tone. You can elect to turn them to be On or Off.
83
CU515_Eng_0919 9/19/07 4:43 PM Page 84
Settings
Display
Menu 9.2
Shop Graphics
(Menu 9.2.1)
Connects to AT&T’s graphic download site.
Wallpapers
(Menu 9.2.2)
You can select the background picture in standby mode.
Backlight Timer
(Menu 9.2.3)
Use this to select whether or not the phone uses the backlight.
Brightness
(Menu 9.2.4)
You can set the brightness of display screen(Internal LCD and External LCD).
Menu Styles
(Menu 9.2.5)
You can configure the menu style to Icon style or List style.
Languages
(Menu 9.2.6)
You can change the language for the display text on your phone. This change will also affect the Language Input mode.
Dialing Fonts
(Menu 9.2.7)
You can configure the font size and color of the numbers which appear in the home screen
84 when you make a call.
Clocks & Calendar
(Menu 9.2.8)
This feature allows you to select the internal
LCD clock or Calendar display on the standby screen.
Color Schemes
(Menu 9.2.9)
You can change the color of the menu, soft key area, title bar area, and cursor by changing the
Color Schemes.
You can select the Color Schemes from
Orange, Metal, and Sky.
Bluetooth
Menu 9.3
Your phone has built-in Bluetooth wireless technology, which makes it possible for you to connect your phone wirelessly to other
Bluetooth devices such as a hands free device,
PC, PDA, a remote screen, or other phones.
Only one of the devices registered in your phone can be connected at a time. (To make a connection to the same type of device or change Bluetooth preferences, disconnect the existing device first.)
You can have a conversation via a cordless
Bluetooth hands-free phone or browse the
CU515_Eng_0919 9/19/07 4:43 PM Page 85
Settings
Internet, wirelessly connected via a mobile phone.
You can also exchange, for example, business cards, calendar items and pictures.
MobiTV or XMRadio is supported through Only
Stereo Bluetooth.
Bluetooth A2DP Music Playing is available in the Music Player Menu.
Hands-free profile
This icon appears when the hands-free profile is used between the hands-free device and the phone. This allows you to call using a Bluetooth connection.
A2DP profile
This icon appears when the A2DP profile is used between the stereo headset device and the phone. This allows you to listen to an audio clip. A2DP is the Advanced
Audio Distribution Profile, which provides support for streaming either mono or stereo audio using Bluetooth.
Hand-free +A2DP profile
This icon appears when both profiles of the hands-free and the A2DP are used between the compatible device and the phone. This allows you to call and listen to an audio clip using a Bluetooth connection.
For using each device, see a manual that comes with the device.
n Note
We recommend that your phone and the
Bluetooth device you are communicating with be no more than 10 meters apart. The connection may be improved if there are no solid objects in between your phone and the other Bluetooth device.
Turn On/Off
(Menu 9.3.1)
This menu sets the Bluetooth on or off using the navigation key.
Search New Device
(Menu 9.3.2)
This function allows you to search and add new device at once.
Paired Devices
(Menu 9.3.3)
This function allows you to view the list of all devices that are paired with your phone at once.
To add a new device, press the left soft key
[New]
85
CU515_Eng_0919 9/19/07 4:43 PM Page 86
Settings
1. Select the [New] key to search the device that can be connected and which is within range.
2. If you want to stop searching, press the right soft key [Cancel].
3. All of the devices found are displayed in the pop-up menu.
Select the desired device by pressing the OK key, and entering the password.
Settings
(Menu 9.3.4)
This menu allows you to configure the profile for a Bluetooth.
] My Device Visibility
1. Selecting the Visible option exposes your phone to other Bluetooth devices.
2. Selecting Hidden shows your phone only to already paired devices.
] My Device Name: Allows you to change the handset's name that can be seen by other Bluetooth devices.
] Supported Services: Shows you all services that CU515 supports.
] My Address: You can check your Bluetooth address. You cannot change the default setting.
86
] Primary Storage: You can assign the primary storage to Handset Memory or
Memory Card.
Date & Time
Menu 9.4
Set Date
(Menu 9.4.1)
This allows you to enter the day, month and year. You can change the date format via the
Date Format menu option.
Date Format
(Menu 9.4.2)
MM/DD/YYYY(month/day/year)
DD/MM/YYYY(day/month/year)
YYYY/MM/DD(year/month/day)
Set Time
(Menu 9.4.3)
This allows you to enter the current time. You can choose the time format via the Time
Format menu option.
Time Format
(Menu 9.4.4)
12 Hours/24 Hours
Auto Update
(Menu 9.4.5)
Select On to set the phone to automatically update the time and date according to the current local time zone.
CU515_Eng_0919 9/19/07 4:43 PM Page 87
Settings
Call
Menu 9.5
Call Forwarding
(Menu 9.5.1)
When this network service is activated, you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact your service provider. Select one of the divert options, for example, select If busy to divert voice calls when your number is busy or when you reject incoming calls.
The following options are available:
] All Voice Calls: Diverts voice calls unconditionally.
] If Busy: Diverts voice calls when the phone is in use.
] If No Answer: Diverts voice calls which you do not answer.
] If Out of Reach: Diverts voice calls when the phone is switched off or out of coverage.
] All Data Calls: Diverts to a number with a
PC connection unconditionally.
] All Fax Calls: Diverts to a number with a fax connection unconditionally.
Send My Number
(Menu 9.5.2)
This network service allows you to set your phone number to be displayed On or hidden
Off from the person you are calling. You can select Set by Network if you prefer to have different settings for different service providers.
Auto Redial
(Menu 9.5.3)
Select On, your phone redials the number you're trying to call up to 10 times after you hear a quick, engaged signal. Press [END] to stop the call attempts.
This feature attempts to redial numbers that are engaged due to the wireless network. It does not redial numbers to an engaged party.
n Note
There will be no alert indicating the call has been connected.
You must stay on the line to hear when the call is connected.
87
CU515_Eng_0919 9/19/07 4:43 PM Page 88
Settings
Answer Mode
(Menu 9.5.4)
This allows you to determine how to answer the phone.
] Any Key: You can answer an incoming call by pressing any key, except the [END] key.
] Send Key Only: You can only answer an incoming call by pressing the [SEND] key.
] Flip Open: When the phone rings, you can answer a call simply by opening the flip.
Minute Minder
(Menu 9.5.5)
This option allows you to specify whether the phone will beep every minute during an outgoing call to keep you informed of the length of the call.
Call Waiting
(Menu 9.5.6)
The network will notify you of a new incoming call while you have a call in progress. Select
Activate to request the network to activate call waiting, Deactivate to request the network to deactivate call waiting, or View
Status, to check if the function is active or not.
Call Reject
(Menu 9.5.7)
This menu allows you to enable or disable call reject for all numbers or a specific number.
] Call Reject On/Off: This feature allows you to reject or not the incoming calls unconditionally by disconnecting. When the
Reject All Calls option is set, all incoming calls are routed directly to Voicemail.
] Call Reject List: Configures conditional call reject mode. Press the left soft key [New] to add the phone number to be rejected to the list. When you add a number to the list, you can add the number by entering it directly or by searching for the number in the Contact
List.
Video Share
(Menu 9.5.8)
] Initial Notification
- On: If the Video Share Call service is available and a voice call has been made, a pop-up window will be shown on the screen to ask whether to make a Video
Share Call or not.
- Off: No notification window is displayed after the phone determines whether or not the Video Share call service is available.
88
CU515_Eng_0919 9/19/07 4:43 PM Page 89
Settings
] Auto Record
- On: Automatically starts recording Video
Share call images. You can view the recorded videos on [My Stuff] – [Video].
- Off: Does not automatically start recording video share call images.
] Service
- On: This option activates the Video Share
Call service.
- Off: If this option is selected, the Video
Share Call service will be unavailable even in a 3G service area. (If the service is Off, you will have to set it to On and restart the phone in order to reactivate the Video
Share Call service).
Send DTMF Tones
(Menu 9.5.9)
You can send the DTMF (dual tone multifrequency) tones of the number on the display during a call.
This option is helpful for entering a password or account number when you call an automated system, like a banking service.
89
CU515_Eng_0919 9/19/07 4:43 PM Page 90
Settings
Menu User Feature
Transmission/
Receiving Mode
TTY Full
For hearing- / speech- impaired
TTY+TALK For hearing-impaired can talk
TTY+HEAR For speech-impaired audible
TTY Off For regular users text message transmission, text message reception voice transmission, text message reception text message transmission, voice reception voice transmission, voice reception
When making communications with a normal terminal operator required operator required operator required
TTY
(Menu 9.5.0)
Allows you to attach a TTY device enabling you to communicate with parties also using a TTY device.
A phone with TTY support is able to translate typed characters to voice. Voice can also be translated into characters and then displayed on the TTY.
TTY mode (Tele Type writer)
TTY modes are as follows :
1. TTY Full:
- Users who cannot talk and hear send and receive a text message through TTY equipment.
2. TTY Talk:
- Users who can talk but cannot hear receive a text message and send voice messages through TTY equipment.
3. TTY Hear:
- Users who can hear but cannot talk send a text message and receive voice messages through TTY equipment.
4. TTY Off:
- Normal users send and receive without TTY equipment.
Connecting TTY Equipment and a
Terminal
1. Connect a TTY cable the TTY connection on the terminal. (the TTY connection location is the same as a hands-free ear socket)
90
CU515_Eng_0919 9/19/07 4:43 PM Page 91
Settings
2. Enter the phone menu and set up the desired
TTY mode. (For a TTY mode, see below)
3. After setting a TTY mode, check the LCD screen of the phone for the TTY icon.
4. Connect the TTY equipment to the power source and turn it on.
5. Make a phone connection to the desired number.
6. When a connection is made, use the TTY equipment to type in and send a text message or send a voice message.
7. The voice or text message from the receiver end appears on the TTY equipment display.
Hearing Aid
(Menu 9.5.*)
If you select On, users having hearing aid with
T-Coil will have better quality of sound. This T-
Coil mode will remain On for all calls.
Security
Menu 9.6
Various codes and passwords are used to protect the features and settings of your phone. They are described in the following sections.
Lock Handset
(Menu 9.6.1)
You can use a security code to avoid unauthorized use of the phone.
If you set phone lock to When Power On, the phone will request a security code whenever you switch the phone on. If you set the phone lock to When SmartChip Changed, your phone will request a security code only when you change your SmartChip. If you set the phone lock to Immediately, your phone will lock immediately.
PIN Code Request
(Menu 9.6.2)
When the PIN code request feature is set to
‘On’, you must enter your PIN each time you switch the phone on. Consequently, any person who does not have your PIN cannot use your phone without your approval.
n Note
Before setting the PIN code request feature to
Off, you must enter your PIN
The following [Options] are available:
] On: You must enter the PIN each time the phone is switched on.
] Off: The phone connects directly to the network when you switch it on.
91
CU515_Eng_0919 9/19/07 4:43 PM Page 92
Settings
Fixed Dial Number
(Menu 9.6.3)
This allows you to restrict your outgoing calls to selected phone numbers, if this function is supported by your SmartChip. The PIN2 code is required.
] FDN On/Off
- On: You can only call phone numbers stored in the Address Book. You must enter your PIN2.
- Off: You can call any number.
] FDN List n Note
Not all SmartChips have a PIN2. If your
SmartChip does not, this menu option is not displayed.
Change Codes
(Menu 9.6.4)
The Change codes feature allows you to change your current password to a new one.
You must enter the current password before you can specify a new one.
You can change the access codes for: Security
Code, PIN1, PIN2 n Note
PIN: Personal Identification Number.
92
PTT Key Lock
(Menu 9.6.5)
This function is used to prevent a PTT call from being made accidentally with a press of the
PTT key when is in your pocket or bag while it is being unused.
] On: When you are logged in to the PTT function, the message "Please press PTT key again" is displayed if you press the PTT key.
Press the PTT key again within two (2) seconds to display the PTT contact list and make a call to a desired opposite.
] Off: If you are logged in to the PTT function, you can use contact list and PTT call using the PTT key.
n Note
The PTT Key Lock works when your phone's flip is closed.
Connection
Menu 9.7
Network Profiles
(Menu 9.7.1)
This menu shows the Network Profile. You can register, delete and edit by using the Options
Menu. However, you cannot delete or edit default configurations provided by AT&T.
CU515_Eng_0919 9/19/07 4:43 PM Page 93
Settings
USB Connection Mode
(Menu 9.7.2)
You can transfer files from a compatible PC to the memory in your phone using the Mass
Storage. When you connect the phone to a PC using the USB cable, this will be displayed as a removable disk through Windows Explorer.
Flight Mode
Menu 9.8
This allows you to use only the phone’s features that do not require the use of the wireless network when you are in an airplane or in places where the wireless network is prevented.
If you set the flight mode on, the icon will be displayed on the screen instead of the network signal icon.
] On: You cannot make (or receive) any calls, including emergency calls, or use other features that require network coverage
] Off: You can deactivate the flight mode and restart your handset to access the network.
Software Update
Menu 9.9
This menu is used to resume a postponed software update. If new software exists, the
AT&T server notifies devices using a WAP push message. Before updating new software after downloading it from the AT&T server, users will whether they would like to postpone the operation. Reminder times can be set to 30 minutes, 1 hour, and 4 hours. When the time is up, users are prompted again or users can resume the postponed operation using this menu at any time.
93
CU515_Eng_0919 9/19/07 4:43 PM Page 94
Settings
Check Memory
Menu 9.0
Common
(Menu 9.0.1)
This function shows the status of the user memory of the handset.
Reserved
(Menu 9.0.2)
This function shows the status of the reserved memory for the user (Text Message, Contact
List, Calendar, Tasks, Memo).
SmartChip
(Menu 9.0.3)
This function shows the status of the
SmartChip card user memory.
Memory Card
(Menu 9.0.4)
If your phone has a multimedia memory card in the card slot, you can save images, sounds, and videos on the memory card. You can check the current status of the external memory card in the Memory status menu.
Handset Information
Menu 9.*
This menu is used to view My Numbers,
Manufacturer and Model Name information etc.
Reset Settings
Menu 9.#
This function allows you to restore factory settings. To do this, you need the security code.
Clear Memory
(Menu 9.#.1)
Deletes downloaded/user created contents
(e.g.: images, videos) from Handset content and the External Memory card.
] Handset Contents: Deletes all downloaded/user created Images, Videos &
Sounds from the Handset Memory.
] Handset Personal Info.: Restores Personal
Information stored in the handset memory
(e.g.: address book, messages, tasks, alarm,
Calendar schedules) to default values.
] Memory Card: Deletes all contents from the External Memory Card.
WARNING! Be careful when you insert Micro
SD Card that is 2GB or under 2GB of memory on CU515: When you activate, Menu->
9.Settings -> #Reset Settings -> 1 Clear
Memory -> 3 Memory Card
It could be limited with the number of files under root directory of Memory Card, since the
Micro SD card is formatted by FAT16 that is inserted on the phone.
94
CU515_Eng_0919 9/19/07 4:43 PM Page 95
Settings
Therefore, you should create a folder under root directory and use that folder when you send/copy a file.
Reset Default
(Menu 9.#.2)
Restores the settings (e.g.: Audio, Display,
Language, Date & Time, Bluetooth Settings) stored in the handset memory to default values.
95
CU515_Eng_0919 9/19/07 4:43 PM Page 96
Q&A
Please check to see if any problems you have encountered with the phone are described in this section before taking the phone in for a service or calling a service engineer.
Q How do I view the list of outgoing calls, incoming calls and missed calls?
A Press the [SEND] key.
Q Why does the LCD not turn on?
A Remove the battery and turn on the power after placing it back in. If there is no change, fully charge the battery and try again.
Q How do I view all numbers stored in the
A memory?
Press the down navigation key.
Q Why is the connection inconsistent or not audible in certain areas?
A When the frequency environment is unstable in a certain area, connection may be inconsistent and not audible. Relocate to another area and try again.
Q Why is the connection not consistent or abruptly disconnects even when established?
A When frequency is unstable or weak or if there are too many users, connection may be cut off even after it was established. Please try again later or attempt after relocating to other areas.
96
Q Why is there an echo when a connection is made with certain telephones in a certain area?
A This is called the ‘Echo Phenomenon’, which occurs if the connection volume is too high or caused by special properties (semielectronic telephone exchange) of the equipment on the other end.
Q Why does the phone heat up?
A The phone may get hot when there is a very long call duration or when games are played or even when surfing the Internet for a long time. This has no effect upon the life of the product or performance.
CU515_Eng_0919 9/19/07 4:43 PM Page 97
Q Why does the battery life get shorter in standby mode?
A The battery is worn out. As time passes, the battery life gradually becomes shorter. If the battery lasts about half the amount of time as when first purchased, it’s time to purchase a new battery.
Q Why does the battery run out so quickly during normal use?
A It is due to the user environment or a large number of calls or a weak signal.
Q Why is no number dialed when you recall an
Address Book entry?
A Check that the number has been stored correctly by using the Address book Search feature. Re-store them, if necessary.
Q&A
97
CU515_Eng_0919 9/19/07 4:43 PM Page 98
Accessories
There are a variety of accessories available for your mobile phone. You can select these options according to your personal communication requirements. Consult your local dealer for availability.
Travel Adapter
This adapter allows you to charge the battery. It supports standard U.S. 120 Volt 60Hz outlets.
It takes under 4 hours to charge a completely discharged battery.
Battery
Standard battery is available.
Vehicle Power Adapter
You can operate the phone and trickle charge the phone battery from your vehicle by using the vehicle power adapter.
It takes 5 hours to charge a completely discharged battery.
98
CU515_Eng_0919 9/19/07 4:43 PM Page 99
Stereo headset
Allows hands-free operation. Includes earpiece and microphone.
Data Cable Kit
* When installing, make sure to connect to the PC after your phone and the cable have been connected. Otherwise, your PC may have a problem.
Accessories n Note
• Always use genuine LG accessories. Failure to do this may invalidate your warranty.
• Accessories may be different in different regions; please check with our regional service company or agent for further enquiries.
99
CU515_Eng_0919 9/19/07 4:43 PM Page 100
Safety Guidelines
TIA Safety Information
Provided herein is the complete TIA Safety
Information for Wireless Handheld phones.
Inclusion of the text covering Pacemakers,
Hearing Aids, and Other Medical Devices is required in the owner’s manual for CTIA
Certification. Use of the remaining TIA language is encouraged when appropriate.
Exposure to Radio Frequency
Signal
Your wireless handheld portable telephone is a low power radio transmitter and receiver.
When it is ON, it receives and also sends out radio frequency (RF) signals.
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
ANSI C95.1 (1992) *
NCRP Report 86 (1986)
ICNIRP (1996)
Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over
120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1).
* American National Standards Institute;
National Council on Radiation Protection and
Measurements; International Commission on
Non-Ionizing Radiation Protection
The design of your phone complies with the
FCC guidelines (and those standards).
Antenna Care
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
100
CU515_Eng_0919 9/19/07 4:43 PM Page 101
Safety Guidelines
Tips on Efficient Operation
For your phone to operate most efficiently:
] Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless phones in the areas where you drive.
Always obey them. Also, if using your phone while driving, please:
] Give full attention to driving - driving safely is your first responsibility;
] Use hands-free operation, if available;
] Pull off the road and park before making or answering a call if driving conditions so require.
Electronic Devices
Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum separation of six
(6’) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent research by and recommendations of Wireless Technology
Research.
Persons with pacemakers:
] Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON;
] Should not carry the phone in a breast pocket.
] Should use the ear opposite the pacemaker to minimize the potential for interference.
] If you have any reason to suspect that interference is taking place, turn your phone
OFF immediately.
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.
101
CU515_Eng_0919 9/19/07 4:43 PM Page 102
Safety Guidelines
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Health Care Facilities
Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that has been added to your vehicle.
Posted Facilities
Turn your phone OFF in any facility where posted notices so require.
Aircraft
FCC regulations prohibit using your phone while in the air. Turn your phone OFF before boarding an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn your phone OFF when in a ‘blasting areas or in areas posted: ‘Turn off two-way radio’.
Obey all signs and instructions.
Potentially Explosive
Atmosphere
Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always, marked clearly.
Potential areas may include: fueling areas
(such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles (such as grain, dust, or metal powders); and any other
102
CU515_Eng_0919 9/19/07 4:43 PM Page 103
Safety Guidelines area where you would normally be advised to turn off your vehicle engine.
For Vehicles Equipped with an
Air Bag
An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.
Safety Information
Please read and observe the following information for safe and proper use of your phone and to prevent damage. Also, keep the user guide in an accessible place at all the times after reading it.
] Do not disassemble or open crush, bend or deform, puncture or shred.
] Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.
] Only use the battery for the system for which it is specified.
] Only use the battery with a charging system that has been qualified with the system per
IEEE-Std- 1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
] Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.
] Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.
] Promptly dispose of used batteries in accordance with local regulations.
] Battery usage by children should be supervised.
] Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.
] At least, one of the Authentication methods may be implemented. (e.g. H/W, S/W,
Mechanical, Hologram, etc.)
] Improper battery use may result in a fire, explosion or other hazard.
103
CU515_Eng_0919 9/19/07 4:43 PM Page 104
Safety Guidelines
Charger and Adapter Safety
] The charger and adapter are intended for indoor use only.
Battery Information and Care
] Please dispose of your battery properly or take it to your local wireless carrier for recycling.
] The battery does not need to be fully discharged before recharging.
] Use only LG-approved chargers specific to your phone model since they are designed to maximize battery life.
] Do not disassemble or impact the battery as it may cause electric shock, short-circuit, and fire. Store the battery in a place out of reach of children.
] Keep the battery’s metal contacts clean.
] Replace the battery when it no longer provides acceptable performance. The battery can be recharged several hundred times before replacement.
] Recharge the battery after long periods of non-use to maximize battery life.
] Battery life will vary due to usage patterns and environmental conditions.
104
] Use of extended backlighting, MEdia Net
Browsing, and data connectivity kits affect battery life and talk/standby times.
] The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on.
Explosion, Shock, and Fire
Hazards
] Do not put your phone in a place subject to excessive dust and keep the minimum required distance between the power cord and heat sources.
] Unplug the power cord prior to cleaning your phone, and clean the power plug pin when it is dirty.
] When using the power plug, ensure that it is firmly connected. If it is not, it may cause excessive heat or fire.
] If you put your phone in a pocket or bag without covering the receptacle of the phone
(power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone. Always cover the receptacle when not in use.
CU515_Eng_0919 9/19/07 4:43 PM Page 105
Safety Guidelines
] Do not short-circuit the battery. Metallic articles such as a coin, paperclip or pen in your pocket or bag may short-circuit the + and – terminals of the battery (metal strips on the battery) upon moving. Short-circuit of the terminal may damage the battery and cause an explosion.
General Notice
] Using a damaged battery or placing a battery in your mouth may cause serious injury.
] Do not place items containing magnetic components such as a credit card, phone card, bank book or subway ticket near your phone. The magnetism of the phone may damage the data stored in the magnetic strip.
] Talking on your phone for a long period of time may reduce call quality due to heat generated during use.
] When the phone is not used for a long period time, store it in a safe place with the power cord unplugged.
] Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference to the phone.
] Do not use the phone if the antenna is damaged. If a damaged antenna contacts skin, it may cause a slight burn. Please contact an LG Authorized Service Centre to replace the damaged antenna.
] Do not immerse your phone in water. If this happens, turn it off immediately and remove the battery. If the phone does not work, take it to an LG Authorized Service Centre.
] Do not paint your phone.
] The data saved in your phone might be deleted due to careless use, repair of the phone, or upgrade of the software. Please backup your important phone numbers. (Ring tones, text messages, voice messages, pictures, and videos could also be deleted.)
The manufacturer is not liable for damage due to the loss of data.
] When you use the phone in public places, set the ring tone to vibration so as not to disturb others.
] Do not turn your phone on or off when putting it in your ear.
105
CU515_Eng_0919 9/19/07 4:43 PM Page 106
Safety Guidelines
FDA Consumer Update
The U.S. Food and Drug Administration Centre for Devices and Radiological Health Consumer
Update on Mobile Phones.
1. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are associated with using wireless phones.
There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency(RF) energy in the microwave range while being used.
They also emit very low levels of RF when in the standby mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.
106
2. What is the FDA’s role concerning the safety of wireless phones?
Under the law, the FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency(RF) energy at a level that is hazardous to the user. In such a case, the FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace, or recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, the FDA has urged the wireless phone industry to take a number of steps, including the following:
] Support needed research into possible biological effects of RF of the type emitted by wireless phones;
] Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and
] Cooperate in providing users of wireless phones with the best possible information
CU515_Eng_0919 9/19/07 4:43 PM Page 107
Safety Guidelines on possible effects of wireless phone use on human health.
The FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:
] National Institute for Occupational Safety and Health
] Environmental Protection Agency
] Occupational Safety and Health
Administration
] National Telecommunications and
Information Administration
] The National Institutes of Health participates in some interagency working group activities, as well.
The FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. The FCC relies on the FDA and other health agencies for safety questions about wireless phones.
The FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.
3. What kinds of phones are the subject of this update?
The term ‘wireless phone’ refers here to handheld wireless phones with built-in antennas, often called ‘cell’, ‘mobile’, or
‘PCS’ phones. These types of wireless phones can expose the user to measurable radio frequency(RF) energy because of the short distance between the phone and the user’s head. These RF exposures are limited by FCC safety guidelines that were developed with the advice of the FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person’s RF exposure decreases rapidly with increasing distance from the source. The so-called
107
CU515_Eng_0919 9/19/07 4:43 PM Page 108
Safety Guidelines
‘cordless phones,’ which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.
4. What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency(RF) energy exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer causing chemicals so as to be predisposed to develop cancer in the absence of
RF exposure. Other studies exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under which people use wireless
108 phones, so we don’t know with certainty what the results of such studies mean for human health. Three large epidemiology studies have been published since December
2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.
5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one
CU515_Eng_0919 9/19/07 4:43 PM Page 109
Safety Guidelines exists. Epidemiological studies can provide data that is directly applicable to human populations, but 10 or more years follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do- may be many, many years. The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.
6. What is the FDA doing to find out more about the possible health effects of wireless phone RF?
The FDA is working with the U.S. National
Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency(RF) energy. The FDA has been a leading participant in the World Health
Organization International Electromagnetic
Fields (EMF) Project since its inception in
1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The project has also helped develop a series of public information documents on EMF issues. The FDA and the
Cellular Telecommunications & Internet
Association (CTIA) have a formal
Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety. The FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts with independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.
7. How can I find out how much radio frequency energy exposure I can get by using my wireless phone?
All phones sold in the United States must comply with Federal Communications
109
CU515_Eng_0919 9/19/07 4:43 PM Page 110
Safety Guidelines
Commission (FCC) guidelines that limit radio frequency(RF) energy exposures. The FCC established these guidelines in consultation with the FDA and the other federal health and safety agencies. The FCC limit for RF exposure from wireless telephones is set at a Specific Absorption Rate (SAR) of 1.6
watts per kilogram (1.6 W/kg). The FCC limit is consistent with the safety standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the
National Council on Radiation Protection and
Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects.
Manufacturers of wireless phones must report the RF exposure level for each model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rfsafety) gives directions for locating the FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.
8. What has the FDA done to measure the radio frequency energy coming from wireless phones?
The Institute of Electrical and Electronic
Engineers (IEEE) is developing a technical standard for measuring the radio frequency energy (RF) exposure from wireless phones and other wireless handsets with the participation and leadership of FDA scientists and engineers. The standard,
‘Recommended Practice for Determining the
Spatial- Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless
Communications Devices: Experimental
Techniques,’ sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head. Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether
110
CU515_Eng_0919 9/19/07 4:43 PM Page 111
Safety Guidelines a wireless phone complies with safety guidelines.
9. What steps can I take to reduce my exposure to radiofrequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency(RF) energy.
Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the
RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency(RF) energy, the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.
Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.
111
CU515_Eng_0919 9/19/07 4:43 PM Page 112
Safety Guidelines
11. What about wireless phone interference with medical equipment?
Radio frequency(RF) energy from wireless phones can interact with some electronic devices. For this reason, the FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the
Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by the
FDA, medical device manufacturers, and many other groups, was completed in late
2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. The FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE).
This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a ‘compatible’ phone and a ‘compatible’ hearing aid at the same time. This standard was approved by the IEEE in 2000. The FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, the FDA will conduct testing to assess the interference and work to resolve the problem.
12. Where can I find additional information?
For additional information, please refer to the following resources:
FDA web page on wireless phones
(http://www.fda.gov/cdrh/phones/ index.html)
Federal Communications Commission (FCC)
RF Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing
Radiation Protection
(http://www.icnirp.de)
World Health Organization (WHO)
International EMF Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.nrpb.org.uk/)
112
CU515_Eng_0919 9/19/07 4:43 PM Page 113
Safety Guidelines
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to communicate by voice almost anywhere, anytime. An important responsibility accompanies the benefits of wireless phones, one that every user must uphold.
When operating a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless phone and its features such as speed dial and redial.
Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.
2. When available, use a hands-free device. A number of hands-free wireless phone accessories are readily available today.
Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.
3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can reach it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voicemail answer it for you.
4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “to-do” list while driving a car, you are not watching where you are going. It is common sense.
Don’t get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to
113
CU515_Eng_0919 9/19/07 4:43 PM Page 114
Safety Guidelines plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip— dial only a few numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be distracting.
Stressful or emotional conversations and driving do not mix; they are distracting and even dangerous when you are behind the wheel of a car. Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.
8. Use your wireless phone to call for help.
Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations — with your phone at your side, help is only three numbers away. Dial 911 or other local emergency number in the case of fire, traffic accident, road hazard or medical emergency.
Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good
Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.
10. Call roadside assistance or a special wireless non-emergency assistance number when necessary. Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you can still use your wireless phone to lend a hand. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured or a vehicle. you know to be stolen, call roadside assistance or other special non-emergency wireless number.
For more information, please call to 888-901-
SAFE, or visit our website www.wow-com.com
114
CU515_Eng_0919 9/19/07 4:43 PM Page 115
Safety Guidelines
Consumer Information on
SAR (Specific Absorption
Rate)
This Model Phone Meets the
Government’s Requirements for Exposure to Radio Waves.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6W/kg. * Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Although SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Because the phone is designed to operate at multiple power levels to use only the power required to reach the network, in general, the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.3 W/kg and when worn on the body, as described in this user’s manual, is 1.05
W/kg. (Body-worn measurements differ among phones models, depending upon available accessories and FCC requirements.) While there may be differences between SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.
115
CU515_Eng_0919 9/19/07 4:43 PM Page 116
Safety Guidelines
The FCC has granted an Equipment
Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID BEJCU515.
Additional information on Specific Absorption
Rate (SAR) can be found on the Cellular
Telecommunications Industry Association
(CTIA) website at http://www.wow-com.com
* In the United States and Canada, the SAR limit for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Hearing Aid Compatibility
(HAC) with Mobile Phones
When some mobile phones are used near some hearing devices (hearing aids and cochlear implants),users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated.
Phones that are rated have the rating on their box or a label on the box. The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the
116
CU515_Eng_0919 9/19/07 4:43 PM Page 117
Safety Guidelines better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil
(“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings.
(Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.
To ensure that the Hearing Aid Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and WLAN components must be disabled during a call.
See Page 73 for instructions to disable these components.
117
CU515_Eng_0919 9/19/07 4:43 PM Page 118
Glossary
To help you understand the main technical terms and abbreviations used in this booklet and take full advantage of the feature on your mobile phone, here are a few definitions.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Divert
Ability to reroute calls to another number.
Call Waiting
Ability to inform users that they have an incoming call when engaged on another call.
GPRS (General Packet Radio
Service)
GPRS guaranties continuous connection to the
Internet for mobile phone and computer users.
It is based on the Global System for Mobile
Communication (GSM) circuit-switched cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication, guaranteeing compatibility between the various network operators. GSM covers most European countries and many other parts of the world.
118
Java
Programming language generating applications that can run on all hardware platforms, whether small, medium or large, without modification.
It has been promoted for and geared heavily to the Web, both for public Web sites and
Intranets. When a Java program runs from a
Web page, it is called a Java applet. When it is run on a mobile phone or pager, it is called a
MIDlet.
Line Identification Services
(Caller ID)
Service allowing subscribers to view or block the telephone numbers of callers.
Conference Calls
Ability to establish a conference call involving up to five additional parties.
Phone Password
Security code used to unlock the phone when you have selected the option to lock it automatically each time it switches on.
CU515_Eng_0919 9/19/07 4:43 PM Page 119
Glossary
Roaming
Use of your phone when you are outside your home area (when traveling for example).
SDN (Service Dial Number)
Telephone numbers supplied by your network provider and giving access to special services, such as voice mail, directory inquiries, customer support and emergency services.
SmartChip
Card containing a chip with all the information required to operate the phone (network and memory information, as well as the subscriber’s personal data). The SmartChip fits into a small slot on the back of the phone and is protected by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and from another subscriber without having to speak to the correspondent.
The message created or received (up to 160 characters long) can be displayed, received, edited or sent.
Patent Information
This product was manufactured under one or more of the following U.S.
patents: 5276765 5749067 6061647
119
CU515_Eng_0919 9/19/07 4:43 PM Page 120
Index
A
Access Codes ............................................................ 19
Address Book ............................................................. 81
Alarm Clock ................................................................ 74
Answer Mode ............................................................ 88
Answering a Call ....................................................... 21
Audio & Ringtones .............................................. 74, 83
AuthWallet ................................................................ 62
Auto Redial ................................................................ 87
B
Backlight Timer .......................................................... 84
Battery Disposal .......................................................... 9
Bluetooth ................................................................... 84
Brightness.................................................................. 84
C
Calculator ................................................................... 75
Calendar ..................................................................... 75
Call ............................................................................. 87
Caller Groups ............................................................. 81
Cellular Video ............................................................ 64
Charging the Battery ................................................. 17
Changing the Text Input Mode ................................. 22
D
Date Format ............................................................... 86
Display Information ....................................................13
During a Call .............................................................. 26
D-Day Counter ........................................................... 77
E
Entering Text .............................................................. 21
F
Fixed Dial Number ..................................................... 92
Flight Mode ................................................................ 93
G
GPRS ........................................................................ 118
I
Inbox ........................................................................... 47
Inserting the memory card ........................................ 18
Installing the SmartChip ........................................... 16
L
Languages .................................................................. 84
Lock Handset ............................................................. 91
120
CU515_Eng_0919 9/19/07 4:43 PM Page 121
Index
M
Making a Call ............................................................ 20
Memory Card ....................................................... 80, 94
Messaging ................................................................. 45
Minute Minder .......................................................... 88
Music Player .............................................................. 65
N
Network Profiles ........................................................ 92
Notepad ..................................................................... 75
O
Outbox ........................................................................ 53
P
Phone Components ................................................... 10
Push to Talk ......................................................... 10, 11
Playing Music ............................................................. 66
R
Record Video .............................................................. 79
Removing the memory card ...................................... 18
S
Security ................................................................ 60, 91
Security code ............................................................. 19
Service Dial Numbers ............................................... 82
Shop Games .............................................................. 63
Software Update ....................................................... 93
Speed Dial List .......................................................... 81
Stop Watch ................................................................ 76
T
Take Photo ................................................................. 77
Tasks ........................................................................... 76
Templates ................................................................... 54
Tip Calculator ............................................................. 76
TTY ............................................................................. 90
U
Unit Converter ........................................................... 77
121
CU515_Eng_0919 9/19/07 4:43 PM Page 122
Index
V
Vibrate Mode ............................................................. 21
Video .......................................................................... 74
Video Share Calling ................................................... 28
View Options .............................................................. 82
Voicemail ............................................................. 54, 56
W
Wallpapers ................................................................ 84
World Clock ............................................................... 76
122
CU515_Eng_0919 9/19/07 4:43 PM Page 123
Memo
CU515_Eng_0919 9/19/07 4:43 PM Page 124
Memo
CU515_Eng_0919 9/19/07 4:43 PM Page 125
Memo
CU515_Eng_0919 9/19/07 4:43 PM Page 126
Memo
advertisement