Bose QUIETCOMFORT 35 Owner's Manual
Bose QuietComfort 35: Escape into a world of tranquility with our wireless headphones. Experience superior noise cancellation to eliminate distractions and immerse yourself in your music, podcasts, or audiobooks. Seamlessly connect to your devices via Bluetooth and enjoy up to 20 hours of wireless playtime on a single charge. Stay connected and aware with the noise-canceling microphone for clear calls. The lightweight and comfortable design ensures hours of listening pleasure.
Advertisement
Advertisement
Q U I E T C O M F O R T
®
3 5
OW N E R ’ S G U I D E • B R U G E R V E J L E D N I N G • B E D I E N U N G S A N L E I T U N G
G E B R U I K E R S H A N D L E I D I N G • G U Í A D E L U S U A R I O • K ÄY T TÖ O H J E
N OT I C E D ’ U T I L I S AT I O N • M A N U A L E D I I S T R U Z I O N I
K E Z E L É S I Ú T M U TATÓ • B R U K E R V E I L E D N I N G
P O D R Ę C Z N I K U Ż Y T KOW N I K A • M A N U A L D O P R O P R I E TÁ R I O
B R U K S A N V I S N I N G •
用 户 指 南
คู่มืิอผู้ใช้
•
사 용 자 안 내 서
•
使 用 者 指 南
•
オーナーズガイド
• كلاملا ليلد
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
Please read and keep all safety and use instructions.
WARNINGS/CAUTIONS
• Do NOT use the headphones at a high volume for any extended period.
– To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
– Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
• Do NOT use your headphones while driving for phone calls or any other purpose.
• Do NOT use the headphones with noise canceling on at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc.
– Remove the headphones, or use the headphones with noise canceling off and adjust your volume, to ensure you can hear surrounding sounds, including alarms and warning signals.
– Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the
headphones.
• Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact
Bose customer service.
• Remove headphones immediately if you experience a warming sensation or loss of audio.
• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
• Do NOT use the headphones as aviation communication headsets except in case of emergency.
– No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
– Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
– The headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
• Do NOT make unauthorized alterations to this product.
• Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL,
CSA, VDE, CCC).
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
2 - E N G L I S H
R E G U L AT O R Y I N F O R M AT I O N
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population.
It must not be co-located or operating in conjunction with any other antenna or transmitter.
Meets IDA Requirements.
CAN ICES-3 (B)/NMB-3(B)
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the
NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC and all other EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance
Please dispose of used batteries properly, following local regulations. Do not incinerate.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
E N G L I S H - 3
R E G U L AT O R Y I N F O R M AT I O N
Removal of the rechargeable lithium ion battery in this product should be conducted only by a qualified professional.
Please contact your local Bose retailer or see http://products.bose.com/static/compliance/index.html for further information.
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name
PCBs
Metal Parts
Plastic Parts
Speakers
Cables
Lead
(Pb)
X
X
O
X
X
Mercury
(Hg)
O
O
O
O
O
Cadmium
(Cd)
O
O
O
O
O
Hexavalent
(CR(VI))
O
O
O
O
O
Polybrominated
Biphenyl
(PBB)
O
O
O
O
O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of
GB/T 26572.
Polybrominated diphenylether
(PBDE)
O
O
O
O
O
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “5” is 2005 or 2015.
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China
(Shanghai) Pilot Free Trade Zone
EU Importer: Bose GP, Castleblayney Road, Carrickmacross, County Monaghan, Ireland
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless
performance.
iPad, iPhone, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used with a license from Aiphone K.K.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.
The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
©2016 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior written permission.
4 - E N G L I S H
C O N T E N T S
Getting Started
The Bose® Connect App
Charging the Battery
Headphone Status Indicators
Voice Prompts
Bluetooth®
Managing Multiple Connections
Switching between two connected Bluetooth® devices ............................ 18
Identifying connected Bluetooth® devices ...................................................... 18
Connecting a Bluetooth® device from the headphone pairing list ........ 18
E N G L I S H - 5
C O N T E N T S
Headphone Controls
Connecting a Device to the AUX Connector
Care and Maintenance
Troubleshooting
6 - E N G L I S H
G E T T I N G S TA R T E D
Unpacking
Carefully unpack the carton and confirm that the following parts are included:
Bose® QuietComfort® 35 wireless headphones Carry case
USB charging cable Back-up audio cable Airline adapter
If any part of the headphones appears to be damaged, do not attempt to use it.
Contact your authorized Bose dealer immediately or call Bose customer service.
For contact information, refer to the quick start guide in the carton.
E N G L I S H - 7
G E T T I N G S TA R T E D
Headphone components
Back-up audio cable connector
Headphone controls
Battery and
Bluetooth® indicators
Power/Bluetooth button
(three-position)
Microphone
NFC touchpoint
USB charging
connector
8 - E N G L I S H
Headphone components
G E T T I N G S TA R T E D
Powering on your headphones
Slide to the right.
Back-up audio cable connector
Headphone controls
Battery and
Bluetooth® indicators
Power/Bluetooth button
(three-position)
Microphone
NFC touchpoint
USB charging
connector
Using noise reduction only
Noise reduction is activated when you power on the headphones.
Note: If the headphone battery is depleted, you cannot use noise reduction.
E N G L I S H - 9
T H E B O S E ® C O N N E C T A P P
Enhance your headphones with the Bose® Connect App.
Features
• Unlock the full potential of your headphones
• Free app compatible with most Apple and Android™ systems
• Easily connect and switch between multiple Bluetooth® devices with a single swipe
• Keep your headphones up-to-date with the latest software
• Customize headphone settings, like voice prompt language and hibernation mode.
1 0 - E N G L I S H
C H A R G I N G T H E B AT T E R Y
Connecting the USB cable
1. Plug the small end of the USB cable into the micro-USB connector on the right earcup.
2. Plug the other end into a USB wall charger or computer that is powered on.
While charging, the battery indicator blinks amber.
When the battery is fully charged, the battery indicator glows green. A full charge powers the headphones for up to 20 hours when connected wirelessly and 40 hours when connected with a wire.
Checking the battery
Each time you power on the headphones, the voice prompt announces the headphone battery charge level. To visually check the battery, the indicator is l ocated on the right earcup.
While the headphones are in use, the battery indicator blinks red when the
battery needs charging. For more information, see “Headphone Status Indicators” on page 12.
If you are connected to an Apple device, the device displays the headphone battery charge level near the upper right corner of the screen.
E N G L I S H - 1 1
H E A D P H O N E S TAT U S I N D I C AT O R S
The battery and Bluetooth® indicators are located on the right earcup.
Bluetooth indicator
Battery indicator
Bluetooth® indicator ( )
Indicator activity
Blinking blue
Blinking white
Solid white (10 seconds) then powers off
System state
Ready to pair
Connecting
Connected
Battery indicator ( )
Indicator activity
Solid green
Blinking amber
Solid amber
Blinking red
Solid red
System state
Medium to full charge
Charging
Low charge
Need to charge
Charging error; out of temperature range
1 2 - E N G L I S H
V O I C E P R O M P T S
Voice prompts guide you through the Bluetooth® pairing and connecting processes.
Pre-installed languages
• English
• Spanish
• French
• German
• Mandarin
• Japanese
• Korean
• Italian
• Portuguese
• Swedish
• Dutch
To download another language
To check for additional languages, please visit: updates.Bose.com/QC35
Changing the language
1. Press and hold and simultaneously until you hear the voice prompt for the first language option.
2. Press or to scroll through the languages.
3. When you hear your language, press and hold to select.
E N G L I S H - 1 3
B L U E T O OT H ®
About Bluetooth
®
wireless technology
Bluetooth® wireless technology lets you stream music from Bluetooth smartphones, tablets, computers or other audio devices to your headphones. Before you can stream music from a Bluetooth device, you must pair the device with your headphones.
Choosing your pairing method
You can pair your Bluetooth® device with your headphones using Bluetooth wireless technology or Near Field Communication (NFC).
What is NFC?
NFC is a technology that enables Bluetooth devices to establish wireless communication with each other by simply touching the devices together. Refer to your device owner’s guide to see if your model supports NFC.
If your Bluetooth device does not support
NFC or if you are unsure:
Follow the instructions for Bluetooth pairing
If your device supports Bluetooth pairing via NFC:
Follow the instructions for NFC pairing on
Note: If your device supports Bluetooth pairing via NFC, you can use either
pairing method.
1 4 - E N G L I S H
B L U E T O OT H ®
Pairing your Bluetooth
®
device
1. Slide the Power/Bluetooth® button ( ) to the Bluetooth® symbol ( ) and hold until you hear “Ready to pair” or the Bluetooth indicator blinks blue.
2. On your Bluetooth device, turn on the Bluetooth feature.
Tip: The Bluetooth menu is usually found in the Settings menu.
3. Select your Bose® QuietComfort® headphones from the device list.
Once paired, you hear “Connected to <device name>” or the Bluetooth indicator glows solid white.
E N G L I S H - 1 5
B L U E T O OT H ®
Pairing your Bluetooth
®
device with NFC
1. Power on the headphones.
2. Unlock your device and turn on the Bluetooth and NFC features. Refer to the owner’s guide for your device to learn more about these features.
3. Tap the NFC touchpoint on your device to the NFC touchpoint on your headphones.
Your device may prompt you to accept pairing.
Once paired, you hear “Connected to <device name>” or the Bluetooth indicator glows solid white.
1 6 - E N G L I S H
B L U E T O OT H ®
Disconnecting a Bluetooth
®
device
• Turn off the Bluetooth® feature on your device.
• If your device supports Bluetooth pairing via NFC, tap the NFC touchpoint on your device to the NFC touchpoint on your headphones.
Reconnecting a Bluetooth
®
device
• When powered on, the headphones try to reconnect with the two most recently
connected devices. Make sure the devices are within range and powered on.
• If your device supports Bluetooth pairing via NFC, tap the NFC touchpoint on your device to the NFC touchpoint on your headphones.
E N G L I S H - 1 7
M A N A G I N G M U LT I P L E C O N N E C T I O N S
Your headphones can remember up to eight paired Bluetooth® devices in its pairing list and can be actively connected to two devices at a time.
Note: You can only play audio from one device at a time.
Switching between two connected Bluetooth® devices
1. Pause audio on your first Bluetooth device.
2. Play audio on your second Bluetooth device.
Identifying connected Bluetooth® devices
Slide to and release to hear which device is currently connected.
Connecting a Bluetooth® device from the headphone pairing list
1. Slide to and release to hear which device is connected.
2. Within two seconds, slide to and release again to connect to the next device in the headphone pairing list. Repeat until you hear the correct device name.
3. Play audio on the connected Bluetooth device.
Clearing the headphone pairing list
1. Slide to and hold for 10 seconds, until you hear “Bluetooth® device list cleared.”
2. Delete your Bose® QuietComfort® headphones from the Bluetooth list on your device.
All Bluetooth devices are cleared and the headphones are ready to pair a new device.
1 8 - E N G L I S H
H E A D P H O N E C O N T R O L S
The headphone controls are located on the side of the right earcup.
Volume up
Multi-function button
Volume down
Media playback and volume functions
Function
Play/Pause
Skip Forward
Fast Forward
Skip Backward
Rewind
Volume Up
Volume Down
What to do
Press
Press twice quickly.
Press
Press
Press
twice quickly and hold the second press.
three times quickly.
three times quickly and hold the third press.
Press
Press
E N G L I S H - 1 9
H E A D P H O N E C O N T R O L S
Call functions
Function
Answer a call
End a call
Decline an incoming call
Answer a second incoming call and put the current call on hold
Decline a second incoming call and stay on current call
Transfer call from headphones to phone
Switch between two calls
Create a conference call
Activate voice control
What to do
Press
Press
Press and hold
While on a call, press
for two seconds.
once.
While on a call, press and hold
While on a call, press and hold
for two seconds.
for three seconds.
With two active calls, press twice.
With two active calls, press and hold for three seconds.
Press and hold
Refer to the owner’s guide for your device for more
information.
C O N N E C T I N G A D E V I C E T O T H E A U X C O N N E C T O R
Using the back-up audio cable
Use the supplied back-up audio cable to connect a non-wireless device, or if the
headphone battery is depleted.
1. Plug the audio cable into the connector on the left earcup.
2. Plug the audio cable into the connector on your device.
E N G L I S H - 2 1
C A R E A N D M A I N T E N A N C E
Storing your headphones
The earcups rotate for easy, convenient storage. Place the headphones flat into the case with the earcups surrounding the two soft dividers.
• Be sure to turn off the headphones when not in use.
• Before storing the headphones for more than a few months, be sure the battery is fully charged.
Cleaning your headphones
The headphones do not require scheduled cleaning. Should cleaning be necessary,
simply wipe the outside surfaces with a soft, dry cloth. Do not allow moisture to get inside the earcups or the audio input connector. Do not use liquids or sprays.
2 2 - E N G L I S H
C A R E A N D M A I N T E N A N C E
Replacement parts and accessories
You can purchase accessories from your Bose® dealer, at global.Bose.com, or by placing an order over the phone.
To contact Bose directly, visit: global.Bose.com or owners.Bose.com/QC35
Limited Warranty
Your Bose® QuietComfort® 35 wireless around-ear headphones are covered by a limited
warranty. Details of the limited warranty are provided on the product registration card that is included in the carton. Please refer to the card for instructions on how to register.
Failure to register will not affect your limited warranty rights.
The warranty information provided with this product does not apply in
Australia and New Zealand. See our website at www.bose.com.au/warranty or www.bose.co.nz/warranty for details of the Australia and New Zealand warranty.
E N G L I S H - 2 3
C A R E A N D M A I N T E N A N C E
Technical Information
Input Rating: 5VDC
1A
Battery Charge Time: 2.25 hours
Serial Number Location
The serial number is located beneath the right scrim. The scrim is the inner screen which covers and protects the components inside the earcup.
To view the serial number, grab the scrim at the top edge and gently peel it away. Be careful not to press down on or remove any other components inside the earcup as this could damage the headphones.
2 4 - E N G L I S H
T R O U B L E S H O O T I N G
Problem
Headphones do not power on
Headphones do not connect with Bluetooth® device
Headphones do not pair with NFC
No sound
Poor sound quality
What to do
• Power on the headphones (see page 9).
• Charge the battery.
• Disconnect the back-up audio cable.
• Disconnect the USB charging cable.
• On your Bluetooth device:
Turn the Bluetooth feature off and then on.
Delete your Bose® QuietComfort® headphones from the
Bluetooth list on your device. Pair again.
• Move your Bluetooth device closer to the headphones and away from any interference or obstructions.
• Pair a different Bluetooth device (see page 15).
• Visit owners.Bose.com/QC35 to see how-to videos.
• Clear the headphone pairing list: Slide to and hold for 10 seconds. Delete your Bose® QuietComfort® headphones from the
Bluetooth list on your device. Pair again.
• Make sure your device supports Bluetooth pairing via NFC.
• Unlock your device and turn on the Bluetooth and NFC features.
• Tap the NFC touchpoint on the back of your Bluetooth device to the NFC touchpoint on the headphones.
• Power on the headphones and charge the battery.
• Increase the volume on your headphones, your Bluetooth device and music source.
• Slide to and release to hear the connected device. Make sure you are using the correct device.
• Move your Bluetooth device closer to the headphones and away from any interference or obstructions.
• Use a different music source.
• Pair a different Bluetooth device (see page 15).
• If two Bluetooth devices are connected, pause your other device first.
• If two Bluetooth devices are connected, move the devices within range of the headphones (30 ft. or 10 m).
• Use a different music source.
• Pair a different Bluetooth device.
• Disconnect the second device.
• Move your Bluetooth device closer to the headphones and away from any interference or obstructions.
E N G L I S H - 2 5
T R O U B L E S H O O T I N G
Problem
No audio from a device connected by the back-up audio cable
Poor sound quality from a device connected by audio cable
Battery won’t charge
What to do
• Power on your device and play music.
• Secure the ends of the back-up audio cable.
• Increase the volume on your headphones, your Bluetooth® device and music source.
• Connect a different device.
• Secure the ends of the back-up audio cable.
• Connect another device.
• Secure the ends of the USB charging cable.
• If your headphones have been exposed to high or low
temperatures, let the headphones return to room temperature and try charging again.
2 6 - E N G L I S H
E N G L I S H - 2 7
©2016 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM767952 Rev. 01
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement