Wyse C50 LE, R50 L, R50 LE, X50 c, X50 L, X50 m, Z50 D, Z50 S thin client Administrators Guide
Below you will find brief information for C50LE, R50L, R50LE, X50c, X50L, X50m, Z50D, Z50S. These Wyse thin clients run Wyse Enhanced SUSE Linux Enterprise and offer pre-installed software for most thin computing deployments, including ICA, RDP, Firefox, and PowerTerm. They support central configuration via INI files for streamlined management and offer features like remote desktop access and printer connectivity. Ideal for organizations needing secure, server-based applications.
Advertisement
Advertisement
Administrators Guide
Wyse
®
Enhanced SUSE Linux Enterprise Release 11 SP1
Products: C50LE, R50L, R50LE, X50c, X50L, X50m, Z50D, Z50S
Issue: 113011
PN: 883840-10 Rev. F
Copyright Notices
© 2011, Wyse Technology Inc. All rights reserved.
This manual and the software and firmware described in it are copyrighted. You may not reproduce, transmit, transcribe, store in a retrieval system, or translate into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of this publication without express written permission.
End User License Agreement (“License”)
A copy of the Wyse Technology End User License Agreement is included in the software and provided for your reference only. The License at http://www.wyse.com/license as of the purchase date is the controlling licensing agreement. By copying, using, or installing the software or the product, you agree to be bound by those terms.
Trademarks
The Wyse and PocketCloud logos and Wyse and PocketCloud are trademarks of Wyse Technology Inc. Other product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective companies. Specifications subject to change without notice .
Patents
This product and/or associated software are protected by copyright, international treaties, and various patents, including the following U.S. patents: 6,836,885 and 5,918,039.
Restricted Rights Legend
You acknowledge that the Software is of U.S. origin. You agree to comply with all applicable international and national laws that apply to the Software, including the U.S. Export Administration Regulations, as well as end-user, end-use and country destination restrictions issued by U.S. and other governments. For additional information on exporting the Software, see http://www.microsoft.com/exporting .
Ordering Information
For availability, pricing, and ordering information in the United States and Canada, call 1-800-GET-WYSE
(1-800-438-9973) or visit us at http://www.wyse.com
. In all other countries, contact your sales representative.
FCC Statement
This equipment has been tested and found to comply with the limits for either Class A or Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and shielded AC power cable must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by the system’s manufacturer could void the user’s authority to operate the equipment.
For Hardware with Wireless 802.11 Capabilities
Operation on the 5.15-5.25 GHz frequency band is restricted to indoor use only. The FCC/IC requires indoor use for the 5.15-5.25 GHz band to reduce the potential for harmful interference to co-channel Systems. Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz, and 5.725-5.850 GHz band when associated with an access point (AP).
Caution
Modifications made to the product, unless expressly approved by Wyse Technology, could void the user’s authority to operate the equipment.
Canadian DOC Notices
Class A - This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
Class B - This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
For Hardware with Wireless 802.11 Capabilities
Pour matériel avec capacités 802.11 sans fil
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (identifier l’appareil au moyen du numéro de certification, ou du numéro de modèle si l’appareil relève de la Catégorie II) a été agréé par Industry Canada pour utilisation avec les types d’antennes répertoriées dans la liste ci-dessous, présentant le gain maximum autorisé et l’impédance d’antenne requise pour chaque type d’antenne. L’utilisation avec le présent appareil de types d’antennes qui ne sont pas répertoriées dans ladite liste, présentant un gain supérieur au gain maximum indiqué pour ce type, est strictement interdite.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following tow conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil répond aux normes RSS exemptes de licence d’Industry Canada. Son utilisation est sujette aux deux conditions suivantes : (1) le présent appareil ne peut pas causer de brouillage, et (2) le présent appareil doit accepter tout brouillage, y compris tout brouillage pouvant entraîner des dysfonctionnements.
Regulatory Compliance for Thin Clients
Basic EMC and Safety Requirements
Wyse appliances are compliant with the regulatory requirements in the regions listed below.
U.S.A.—FCC Part 15 (class B), cUL 60950
Canada—IC ICES-003, CAN/CSA-C22 No. 60950
Europe—EN 55022 (class B); EN 55024
Wireless Usage and Requirements
Radio transmitting type devices (RF module) are present in models with the wireless option. These devices operate in the 2.4 GHz band (i.e. 802.11B/G/N LAN & Bluetooth).
As a general guideline, a separation of 20 cm (8 inches) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than
20 cm (8 inches) from the body when wireless devices are on and transmitting.
Some circumstances require restrictions on wireless devices. Examples of common restrictions include:
•
When in environments where you are uncertain of the sanction to use wireless devices, ask the applicable authority for authorization prior to use or turning on the wireless device.
•
Every country has different restrictions on the use of wireless devices. Since your system is equipped with a wireless device, when traveling between countries with your system, check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country.
•
Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Please contact the manufacturer for service.
Device Power Supply
Use only the external power supply that comes with your zero client. For power and voltage ratings, see the serial number label or regulatory label on your device. For power adapter replacement, contact your Wyse Service
Representative. For proper replacement compare the labels on both zero client and power adapter to ensure that their voltages match.
Warning
Use of any other power adapter may damage your zero client or the power adapter. The damage caused by an improper power adapter is not covered by warranty.
Battery Information
Models Cx0, Rx0L, Rx0LE, Xn0L, Xn0m, Xx0C, and Zx0 contain an internal button cell battery replaceable by
Wyse or one of our Authorized Service Centers. For service, visit http://www.wyse.com/serviceandsupport/service/service.asp
.
Warning
There is a risk of explosion if the battery is replaced by an incorrect type. Always dispose of used batteries according to the instructions accompanying the battery.
Warning
Perchlorate Materials – Special Handling May Be Required under California Code of Regulations, title 22. (Only required within the U.S.A.)
Models Xn0L, Xn0m, and Xx0C mobile thin clients contain a user-replaceable battery pack. The battery is designed to work with your Wyse mobile thin client. Do not use a battery from other mobile thin clients or laptop computers with your mobile thin client. Replace the battery only with a compatible battery purchased from Wyse's spare parts provider or one of our authorized service centers. For spare parts visit http://www.wyse.com/serviceandsupport/service/spares.asp
.
Warning
There is a risk of explosion if the battery pack is replaced by an incorrect type. Always dispose of used batteries according to local ordinance and/or regulation.
Caution
Misuse of the battery pack may increase the risk of fire of chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children. Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury or equipment damage.
Contents
1
Introduction
1
Finding the Information You Need in this Guide 2
Related Documentation and Services 2
2
Getting Started: Quickly Learning the Basics
Configuring Thin Client Settings and Connections 5
Connecting to Network and Session Services 6
Shutting Down, Restarting, and Suspending 7
Additional Getting Started Details 7
Accessing Thin Client Boot Menu Settings 8
Restoring Default User Settings 8
Restoring All Original Factory Default Settings When Updating Firmware 8
Enhancing Your Experience with Wyse Software 9
Wyse Virtual Desktop Accelerator 9
3
Configuring Thin Client Settings Locally
11
Installing a Network Printer 15
vi
Contents
Editing and Deleting Drives 24
Trusted Server Configuration 27
Adding Certificates from a Remote Server 28
Adding Certificates from a Local Device 29
Configuring the Image Upgrade Options 31
VNC Server (Preferences for Shadowing/Monitoring) 37
Administrators Only: Details on Using TightVNC Viewer for Remote Administration (to
Shadow/Monitor a Thin Client) 37
4
Configuring Connections Locally
39
®
TEC 42
®
WebConnect 44
Contents
Editing and Deleting Share Names 51
5
Accessing Applications with the Application Browser
57
Displaying and Exporting Log Files (Using the Diagnostics Log Viewer) 58
®
TEC Servers Available for Connections 59
Configuring Volume Control Settings 60
A
Central Configuration: Automating Updates and Configurations
How to Set Up Automatic Configurations and Updates 64
Step 1: Prepare the Root Directory and Folder Structure on the Server 64
Step 2: Direct the Thin Client to the Server 66
Manually Configuring the Server Location 68
Step 3: Reboot the Thin Client 68
Tables
69
vii
viii
Contents
This page intentionally blank.
1
Introduction
Wyse
®
Enhanced SUSE Linux Enterprise (SLE) combines the security, flexibility, and market-leading usability of SUSE Linux Enterprise from Novell
®
with Wyse’s thin computing optimizations in management and user experience. It is ideal for organizations that want to run server-based, Web-based, or local applications (including legacy applications) without the deployment and security concerns of a non-standard Linux distribution.
Wyse Enhanced SLE comes pre-installed with the software needed for most thin computing deployments, including an ICA client, RDP client, Firefox Web browser, and the
PowerTerm
®
Terminal Emulation client. You can extend this base functionality through easy-to-install add-ons qualified and available through Wyse (such as ThinPrint support) or other packages that have been qualified for Novell SUSE Linux Enterprise Thin Client.
As with all Wyse platforms, Wyse Enhanced SLE has built in support for Wyse Device
Manager (WDM) software, Wyse
®
TCX Suite™, and Wyse
®
Virtual Desktop Accelerator.
2
Chapter 1
About this Guide
This guide is intended for administrators of Wyse thin clients running Wyse Enhanced
SUSE Linux Enterprise (SLE). It provides information and detailed system configurations to help you design and manage a Wyse Enhanced SLE environment.
Finding the Information You Need in this Guide
You can use either the Search window or Find toolbar to locate a word, series of words, or partial word in an active PDF document. For detailed information on using these features, refer to the Help in your PDF reader.
Wyse Technical Support
To access Wyse technical resources, visit http://www.wyse.com/support . If you still have questions, you can submit your questions using the Wyse Self-Service Center at http://support.wyse.com/selfservice.html
or call Customer Support at 1-800-800-WYSE
(toll free in U.S. and Canada). Hours of operation are from 6:00 A.M. to 5:00 P.M. Pacific
Time, Monday through Friday.
To access international support, visit http://www.wyse.com/global .
Related Documentation and Services
Fact Sheets containing the features of hardware products are available on the Wyse Web site. Go to http://www.wyse.com/products/hardware , click the link for your hardware product, and then click the link for the Fact Sheet.
Reference Guide: Wyse
®
Enhanced SUSE Linux Enterprise INI Files is intended for administrators of Wyse thin clients running Wyse Enhanced SUSE Linux Enterprise (SLE).
It provides the detailed information you need to help you understand and use the Wyse
Enhanced SLE INI files. It contains information on the different Wyse Enhanced SLE INI files you can use and the rules for constructing the files. It also provides the parameter details you need (with working examples) to get the most out of your Wyse Enhanced SLE
INI files. In addition, this guide also includes an appendix that contains all of the supported connect options you can use for supported connections. It is available at: http:// www.wyse.com/manuals .
Wyse Cloud Software is available on the Wyse Web site at: http://www.wyse.com/products/software .
Wyse Online Community
Wyse maintains an online community where users of our products can seek and exchange information on user forums. Visit the Wyse Online Community forums at: http://community.wyse.com/forum .
2
Getting Started: Quickly Learning the Basics
Use the following information to quickly learn the basics and get started using your thin client:
•
•
•
"Configuring Thin Client Settings and Connections"
•
"Connecting to Network and Session Services"
•
•
•
"Shutting Down, Restarting, and Suspending"
•
"Additional Getting Started Details"
Tip
While it can be used in environments without central configuration for basic connectivity needs, Wyse thin clients are designed to be centrally managed and configured using INI files. In general, it is recommended that you use central configuration to enable you to automatically push updates and any desired default configuration to all supported thin clients in your environment
(see "Central Configuration Automating Thin Client Configurations and
Updates").
Logging In
Tip
On your initial connection to central configuration it is recommended that you connect using a “wired connection” (plug in the network-connected ethernet cable to your thin client before starting the thin client) to obtain the configurations desired by the administrator (connections, system settings, required certificates and so on). This “wired connection” will also provide any wireless configurations provided by the administrator through the INI files.
If you must initially connect to central configuration through wireless, use the
Edit Wireless Connection dialog box (in the Computer menu, click Control
Center > Network Connections > Wireless tab > Add) to create a wireless connection where you can enter the SSID and encryption configurations
required/set up by the network administrator (see "Network Connections").
After your thin client starts, you can log in to your desktop using the default user name
admin and the default password admin. It is highly recommended that you change the default password by using the User Administration dialog box in the Control Center (see
4
Chapter 2
Using Your Desktop
The desktop provides various applications and tools. Use the following guidelines:
• Computer button - Displays the Computer menu containing frequently used programs and common system areas (you can right-click an icon in the Control Center to add the application to your Favorite Applications area).
·
Connection Manager - Opens the Connection Manager. Use the Connection
Manager to view, use, and locally configure connections on the thin client (see
"Configuring Connections Locally").
·
Firefox - Opens the Firefox Web Browser.
·
More Applications - Opens the Application Browser. Use the Application Browser
·
Control Center - Opens the Control Center. Use the Control Center to configure the hardware, look and feel, and system settings of your thin client (see
"Configuring Thin Client Settings Locally").
·
Lock Screen - Locks your Desktop (desktop displays blank after you click the icon).
To restore your screen, move the mouse, enter your credentials, and then click
Unlock.
·
Logout - Opens the Log Out dialog box (click Log Out to end your session but continue to run the thin client).
·
Shutdown - Opens the Shutdown dialog box (where you can shut down your thin
client, restart your thin client, or put your thin client in Standby mode - see "Shutting
Down, Restarting, and Suspending").
• Power icon - (Mobile Thin Clients Only) Move the pointer over this icon to see a pop-up message that shows you whether your mobile thin client is running on AC power or battery power. The message also shows you (by percentage) your battery charge.
•
Network Manager icon - Manages your network connections (see "Connecting to
Network and Session Services").
• System Information icon - Opens the System Information dialog box. Use this dialog
box to view system information about the thin client (see "Viewing System
•
Display Settings icon - Manages your monitor display settings (see "Display").
• Volume Control icon - Controls the audio volume (use the slider as needed). Note that for settings to take effect, sound must be supported and enabled on the server
used for ICA or RDP connections (see "Configuring Volume Control Settings").
• Calendar - Lists the day of the week, date, and time. You can click the calendar to open the calendar window and reset the date.
Getting Started: Quickly Learning the Basics
Desktop Keyboard Shortcuts
Depending on the type of application window you are using (full screen, standard, or
seamless), you can use shortcut keys (see Table 1) to manage windows.
5
Table 1 Window-related Shortcut Keys
Window Action
Maximize window
Minimize window
Restore maximized window to previous size
Move focus to next window
Move focus to previous window
Switch windows using a dialog box.
Switch panel focus
Show the window menu
Press
Alt+F10
Alt+F9
Alt+F5
Minimize/maximize all windows
Move window with arrow keys
Resize window
Show Computer Menu window
Close the window
Alt+Esc
Alt+Shift+Esc
Alt+DownArrow
Alt+Ctrl+Shift+DownArrow
Alt+Space (you can also right-click the window title bar or border, or click the window icon)
Alt+Ctrl+DownArrow
Alt+F7 and press an arrow key
Alt+F8 and press an arrow key
Alt+F1
Alt+F4
Tip
The shortcut keys Alt+DownArrow (allows you to switch windows using a dialog box) and Alt+Ctrl+DownArrow (minimizes or maximizes all windows) are useful for navigating multiple remote sessions without having to log out.
Configuring Thin Client Settings and Connections
While the use of Wyse INI files is recommended to configure thin client settings and connections available to users (see "Central Configuration Automating Thin Client
Configurations and Updates" and Reference Guide: Wyse
®
Enhanced SUSE Linux
Enterprise INI Files), you can use dialog boxes on a thin client to:
•
Set up your thin client hardware, look and feel, and system settings (see "Configuring
Thin Client Settings Locally").
•
Configure and add connections to your Desktop for use (see "Configuring Connections
6
Chapter 2
Connecting to Network and Session Services
Use the Network Manager icon, located on the right side of the Desktop, to display information about your network connection and to connect or disconnect.
Use the following guidelines:
• Click the Network Manager icon to display the Wired Network and Wireless Network menus. For example you can click the Network Manager icon, and then select an available wired or wireless network to use.
• Right-click the Network Manager icon to display the Enable Networking, Enable
Wireless, Enable Notifications, and Connection Information options. For example, you can right-click the Network Manager icon, and then click Enable Wireless to remove the check and disable wireless.
• Hover your mouse pointer over the icon to view a message displaying the status (No
Network Connection, Wired Network Connection Active, and Wireless Network
Connection Active) and name of the network to which your thin client is connected. For example, connecting your thin client to a wired network (by attaching the network cable to your thin client) displays the Wired Network Connection Active status.
For wireless connections (802.11b/g/n Wireless LAN), you can click the Wireless Network
Connection icon (or click the Network Manager icon) in the menu bar to see if a wireless network connection is available. You can click an available wireless network connection to open and use the Wireless Network Authentication dialog box. After authentication, the wireless network is available for use.
Tip
For information on importing certificates that your network may require, refer
Connecting to a Printer
To connect a printer to your thin client through a USB port, you will need a USB-to-printer adapter cable (not included). Before use, you may need to install the driver for the printer by following the printer driver installation instructions. For information on connecting to
printers, refer to "Printing."
Connecting to a Monitor
Monitor connections can be made using the DVI (digital) monitor port and the proper Wyse monitor cables/splitters. For VGA (analog) monitor connections, you must use the included DVI-to-VGA adapter. For information on configuring display settings, see
Tip
Dual Monitors - When using a DVI to DVI/VGA splitter with VGA and DVI monitors at the same time, note that the VGA monitor will be the primary monitor.
For dual-monitor supported thin clients using a DVI to DVI and Display Port to DVI adapter with both DVI monitors at the same time, note that the Display
Port monitor will be the primary monitor.
Getting Started: Quickly Learning the Basics
Shutting Down, Restarting, and Suspending
After using your thin client, you can click Computer > Shutdown and select:
• Shutdown - Shuts down and turns off your thin client.
• Restart - Shuts down and restarts your thin client.
• Suspend - Places the thin client in Standby mode to preserve power. To exit Standby mode, click the mouse.
Tip
If the ReadyMode feature has been enabled and the thin client is shut down, the session ends, the power button LED is put in a state of OFF, and the thin client is placed in Standby mode to preserve power. Upon pressing the power button, the thin client exits Standby mode, and immediately prompts the user with the login dialog box. For more information on ReadyMode, see the
Advanced tab in "Device Settings."
7
Additional Getting Started Details
This section includes additional details on the following:
•
•
•
"Enhancing Your Experience with Wyse Software"
Viewing System Information
Clicking the System Information icon in the Control Center opens the System
Information dialog box. Use this dialog box to view Identity, Network, System Log, and
Copyright information:
• Identity tab - Displays identity information such as Website, Current User, Terminal
Name, Product Name, Platform, Build, SLETC, OS Version, Uptime, Processor,
Processor, Speed, Total Memory, Free Memory, Flash Size, Serial Number, and BIOS
Version.
• Network tab - Displays network information such as Interface, MAC Address, Network
Speed, MTU, IP Address, IPv6 Address, Netmask, Gateway, Domain, Primary DNS,
Secondary DNS, DHCP Server, Lease, and Elapsed time.
• System Log tab - Displays the System Log information, including various messages generated during the operation of the thin client.
• Copyright tab - Displays the software copyright and patent notices.
8
Chapter 2
Restoring Default Settings
Depending on the default settings you want to restore on the thin client, you can use the:
• Boot Menu to restore default values for all the items in the BIOS setup utility (see
"Accessing Thin Client Boot Menu Settings")
• Restore/Reset options to restore default users settings - that is, user customizations are deleted, however, add-on applications that you installed are retained, and
applications that you removed are not restored (see "Restoring Default User Settings")
•
Force option to restore all original factory default settings (see "Restoring All Original
Factory Default Settings When Updating Firmware")
Accessing Thin Client Boot Menu Settings
Power off the thin client. After starting your thin client you will see a Wyse logo for a short period of time. During this period you can press and hold the F2 key (Models Xn0L and
Xx0C) or the Delete key (Models Cx0, Rx0L, Rx0LE, and Zx0) to enter and use the Boot
Menu to make your modifications (type Fireport as the password).
Restoring Default User Settings
You can restore default user settings (user customizations are deleted, however, add-on applications that you installed are retained, and applications that you removed are not restored) by using the:
• Restore factory defaults when upgrading check box in the Thin Client Settings
dialog box when updating firmware (see "INI and Upgrade Settings").
• Reset to Factory Defaults command button in the Advanced tab of the Device
Settings dialog box (see "Device Settings").
• G-key Reset feature. To use this type of restoration, when you see the splash screen during system boot (the screen reads, “SUSE Linux Enterprise Desktop” and displays a progress bar), hold down the G key to restore the default user settings.
Restoring All Original Factory Default Settings When Updating
Firmware
Use the Thin Client Settings dialog box to restore all factory default settings when updating firmware.
1. Click the Computer button on the Desktop and select Control Center to open the
Control Center.
2. Click INI and Upgrade Settings to open the INI and Upgrade Network Settings dialog box.
3. If necessary, clear the Get INI and upgrade server details via DHCP check box.
4. Click Image upgrade settings to open the Thin Client Settings dialog box.
5. Select the Restore factory defaults when upgrading check box.
6. Select the Force base system update check box.
7. Click OK.
Getting Started: Quickly Learning the Basics
9
Enhancing Your Experience with Wyse Software
Wyse provides several software products that are specifically designed to enhance your thin client experience. Wyse Thin Computing Software is available on the Wyse Web site at: http://www.wyse.com/products/software .
Wyse Device Manager (WDM)
Wyse Device Manager
TM
(WDM) servers provide network management services to the thin client (complete user-desktop control—with features such as remote shadow, reboot, shutdown, boot, rename, automatic device check-in support, Wake-On-LAN, change device properties, and so on). With WDM you can manage all of your network devices from one simple-to-use console.
Wyse TCX Suite
Wyse
®
TCX Suite™ provides an enrichment layer above ICA and RDP connections that enable flash acceleration, multiple monitor awareness, rich multimedia playback, high quality bidirectional audio capabilities, and seamless USB device access for Wyse thin clients. Each software component in the suite delivers a specific enhancement designed to work seamlessly within a variety of prevalent backend infrastructure solutions such as
Microsoft
®
Terminal Services, Citrix
®
XenApp, Citrix
®
XenDesktop, and VMware
®
View or
Virtual Desktop Infrastructure.
Wyse TCX Suite includes:
• Wyse® TCX Flash Acceleration™
• Wyse® TCX Multi-display™
• Wyse® TCX Multimedia™
• Wyse® TCX Rich Sound™
• Wyse® TCX USB Virtualizer™
Wyse USB Firmware Tool
The Wyse
®
USB Firmware Tool
TM
provides a simple USB imaging solution to help IT and
Customer Service staff quickly and easily image supported devices.
Using the tool’s flexible windows utility, users can easily:
• Configure a USB key to copy/pull firmware from a source device (to later push to other target devices)
• Configure a USB key to update/push firmware (that you include on the USB key) to target devices (to update firmware)
• Create replicate/duplicate USB keys (containing the original contents) for simultaneous usage on target devices (by users in several locations at the same time)
Wyse Virtual Desktop Accelerator
Wyse
®
Virtual Desktop Accelerator (VDA) is a software product that, when used with
Wyse thin clients and supported PCs, provides an “accelerated” user experience on remote desktop sessions with high round-trip delay between the server and client. By accelerating the remote desktop protocols by a factor of up to 3 times on certain networks, a Wyse VDA session with a server located thousands of miles from your client “feels”
10
Chapter 2 similar to a non-accelerated session with a server located just a few hundred miles from your client.
Built for use on high-bandwidth high-latency networks that are prone to packet loss situations, primary use cases for Wyse VDA include:
• Datacenter Consolidation
• Desktop Cloud Computing
• Remote Off-Shore Desktop Computing
3
Configuring Thin Client Settings
Locally
This chapter contains information to help you set up your thin client hardware, look and feel, and system settings using the Control Center.
Tip
While it is not recommended to use dialog boxes for configuring thin client system settings, they are available in case you want to temporarily override central default configurations or you do not have the option to set up central configuration (smaller environments). In general, it is recommended that you use central configuration to enable you to automatically push updates and any desired default configuration to all supported thin clients in your
environment (see "Central Configuration: Automating Updates and
In addition, the Wyse USB Firmware Tool also provides a simple USB
imaging solution for supported devices (see "Wyse USB Firmware Tool").
Clicking Control Center in the Computer menu (see "Using Your Desktop") or in the
Connection Manager (see "Configuring Connections Locally") opens the Control Center.
Tip
You can right-click an icon in the Control Center to add the application to your
Favorite Applications area (shown in the Computer menu) or to your Startup
Programs.
12
Chapter 3
The Control Center displays the following thin client options that you can configure locally on a thin client using dialog boxes (depending on user privilege level, some dialog boxes and options may not be available for use):
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
"VNC Server (Preferences for Shadowing/Monitoring)"
•
Tip
For details on System Information, see "Viewing System Information."
Configuring Thin Client Settings Locally
13
Display
Use the Display Preferences dialog box (click Display) to set the monitor display settings
(Primary Display Output, Resolution, Refresh Rate, and Rotation). For most monitors, resolution is obtained automatically from the monitor.
Keyboard
Use the Keyboard Preferences dialog box (click Keyboard) to select general (repeat key and cursor blinking), layout (keyboard models and layout options), accessibility (sticky key, slow key, bounce, key audio feedback), mouse keys (keypad control of pointer), and typing break (reminder) preferences.
14
Mouse
Chapter 3
Use the Mouse Preferences dialog box (click Mouse) to select general (mouse orientation, locate pointer, pointer speed, drag-and-drop, double-click time out) and accessibility (simulated secondary click and Dwell click) preferences.
Printing
Use the Printer Configuration dialog box (click Printing) to:
• View the list of currently configured printers.
• Add and configure a network or local printer (click the New icon to open and use the
New Printer wizard).
• Select the default printer (select a printer in the list and click Printer > Set as Default).
Note that administrators can specify system-wide and personal default printers.
• Change printer settings (right-click a printer in the list, select Properties, and then click
Settings).
• Change printer policies (right-click a printer in the list, select Properties, and then click
Policies).
• Change user access to the printer (right-click a printer in the list, select Properties, and then click Access Control).
• Change printer job options (right-click a printer in the list, select Properties, and then click Job Options).
• Delete a printer (right-click a printer in the list, select Delete, and click OK).
Configuring Thin Client Settings Locally
Installing a Network Printer
1. Click the New icon in the Printer Configuration dialog box to open the New Printer wizard.
15
2. Select the printer option you want from the Devices list and follow the New Printer wizard using the following guidelines:
• AppSocket/HP JetDirect - Use this option for a printer connected directly to the network instead of through a computer.
• Forward print job data like a pipe to another command - Use this option to
“pipe” the output of the printing command into another command or to “redirect” the output to a file.
• Internet Printing Protocol (IPP) - Use this option for a printer attached to a different Linux system on the same network running CUPS or a printer configured on another operating system to use IPP (http printing).
• LPD/LPR Host or Printer - Use this option for a printer attached to a different UNIX system that can be accessed over a TCP/IP network (for example, a printer attached to another Linux system on your network) or a thin client used as an LPD
(Line Printer Daemon) server for LPD printing requests from the network. You can enter the DNS or WINS name of the server for the network printer, or an IP address can also be entered. Note that if the printer is attached to another thin client on your network, the entry in the Host box is the name or address of that thin client.
• Windows Printer via SAMBA - Use this option for a printer attached to a different system that is sharing a printer over an SMB network (for example, a printer attached to a Microsoft Windows machine).
• Other - Use this option for other device Uniform Resource Identifier (URI) needs.
16
Chapter 3
Installing a Local Printer
Connect the printer cable to your thin client and use the following guidelines:
1. Click the New icon in the Printer Configuration dialog box to open the New Printer wizard.
2. Be sure the USB printer you connected to your thin client is selected and click
Forward.
Tip
You can use the Serial Port # 1 and Serial Port # 2 options as needed for your local serial port printers.
3. Select the option with which you want to obtain your printer driver and click Forward.
Configuring Thin Client Settings Locally
4. Select the Model and Driver and click Forward.
17
5. Enter the Printer Name, Description, Location, and then click Apply. The printer is added to the Printer Configuration dialog box and is ready for use.
Appearance
Use the Appearance Preferences dialog box (click Appearance) to set the desktop display settings (Theme, Background, Fonts, and Interface). It is recommended to use default settings for best performance.
18
Chapter 3
Configure Panel
Use the Configure Panel dialog box (click Configure Panel) to set whether or not to always display the taskbar on top of all other windows.
Language
Use the Select a Language dialog box (click Language) to select the language of the
User Interface (UI) from the list of supported languages (select the language you want and click OK). Note that currently only English is supported.
Tip
Additional language packs can be downloaded as they become available from Wyse at: www.wyse.com/download .
Configure VDA
Use the Global VDA Config dialog box (click Configure VDA) to enable or disable Wyse
Virtual Desktop Accelerator (to accelerate protocols such as Microsoft RDP and Citrix
ICA).
Configuring Thin Client Settings Locally
19
Desktop Appliance
Use the Desktop Appliance Configuration dialog box (click Desktop Appliance) to configure your thin client to easily access your XenDesktop. Once the thin client is in
Desktop Appliance Mode, a user can login to a XenDesktop with an “Out-of-the-box HDX
Plug-n-play” experience.
Use the following guidelines:
1. Select the Desktop Appliance Mode check box.
2. Enter the XenDesktop URL (this is the location of the XenDesktop server where you can log in and use your desktop). Note that Desktop Appliance Mode can also be enabled through the INI parameters EnableApplianceMode=Yes and Xendesktop
URL=<URL> as described in "Central Configuration Automating Thin Client
Configurations and Updates." Note also that you can connect to your XenDesktop environment by using DCHP Option tag 191 on your DHCP server to specify the
XenDesktop DDC URL (see, "Using DHCP").
3. Click OK to open the confirmation message.
4. Click OK to reboot the thin client.
5. Upon system reboot the thin client will connect to your XenDesktop server and prompt you for your XenDesktop login credentials (enter your login credentials to access your desktop).
Tip
To exit Desktop Appliance Mode and allow normal log in after system start, administrators can use ALT+F4 to display the Desktop Appliance Admin
Login dialog box, where you can enter your administrator login credentials
20
Chapter 3 and access the Control Center to use the Desktop Appliance icon and clear the Desktop Appliance Mode check box (be sure to click OK to reboot the thin client).
6. (Administrators Only) While in Desktop Appliance Mode, administrators can use
ALT+F4 to display the Desktop Appliance Admin Login dialog box, where you can enter your administrator login credentials and access the Control Center for administrative setup.
Device Settings
Use the Device Settings dialog box (click Device Settings) to set the parameters of your device. After configuring the settings you want, be sure to click OK.
Tip
The COM tab will not appear for mobile thin clients.
Terminal Name
Use the Terminal Name tab to obtain the device name:
• Contact DHCP server - Obtains the name from the DHCP server.
• DNS reverse lookup - Obtains the name from a DNS reverse lookup.
• Derive from MAC address - Generates the name from the device MAC address.
• Use the following name - Allows you to manually enter a name.
Configuring Thin Client Settings Locally
21
Hosts
Use the Hosts tab to add mappings of IP addresses to hostnames that are not available through DNS (the names of mapped addresses appear on the Hosts tab):
• Adding an IP address - Click Add to open the /etc hosts entry dialog box, enter an
IP Address, Hostname (and optionally, Aliases), and then click OK.
• Editing a Host - Select a host from the list, click Edit, and configure the host.
• Deleting a Host - Select a host from the list and click Delete.
Ethernet
Use the Ethernet tab to select the Ethernet speed.
COM
Use the COM tab (not available for mobile thin clients, C50LE, or Z50S) to select COM1 and COM2 Speed, Parity, Size, Flow control, and Stop bits (the size of the stop bit with respect to the size of all the other signaling bits in a character).
22
Chapter 3
NTP
Use the NTP tab to enter the IP Address or hostname of the Network Time Protocol (NTP) server (the current NTP server is shown) to synchronize the clock time and date of the thin client.
Advanced
Use the Advanced tab to:
• Enable or disable ReadyMode - You can use ReadyMode for easy login after thin client shut down. If the ReadyMode feature has been enabled (select the ReadyMode check box) and the thin client is shut down, the session ends, the power button LED is put in a state of OFF, and the thin client is placed in Standby mode to preserve power.
Upon pressing the power button, the thin client exits Standby mode, and immediately prompts the user with the login dialog box.
• Restore default user settings - When you use the Reset to Factory Defaults command button, user customizations are deleted. However, add-on applications that you installed are retained, and applications that you removed are not restored.
Configuring Thin Client Settings Locally
ICA (Global Settings)
Clicking the ICA icon in the Control Center opens the ICA Global Settings dialog box.
Use this dialog box to configure the common settings you want for all ICA connections.
After configuring the settings you want, be sure to click OK.
Network
Use the Network tab to configure the servers and reconnection settings.
23
Use the following guidelines:
• PN Agent Server - Enter the PN Agent Server you want to use (this can be a list of servers with each server separated by a semi-colon).
• Metaframe Server - Enter the Metaframe Server you want to use (this can be a list of servers with each server separated by a semi-colon).
• Browsing Protocol - Select the browsing protocol to use from the list.
• PN Logon Domains - Enter the PN logon domains.
• Seamless - Select to display the connection in a seamless window.
• Application Reconnection - Select the Automatic reconnection at logon check box to enable reconnection, and then select the connect option you want.
24
Chapter 3
Drive Mapping
Use the Drive Mapping tab to map drives on the server to devices on the thin client, and to view and manage (add, edit, and delete) the list of current drives (including drive information) mapped on the thin client.
Adding Drives
1. Clear the Dynamic Mapping check box, and then click Add to open the ICA Drive
Map dialog box.
2. Select a drive letter (A to Z) from the Drive Letter list.
3. To enable or disable reading and writing for the drive, select or clear the Enable Read and Enable Write check boxes.
4. Select a drive type (USB Floppy, USB CDROM, USB Disk or Memory Stick, or
Local or Mounted Disk) from the Drive Type list.
5. (Optional) Enter the directory on the USB device to access in the Base Directory text box.
6. Click OK to add the drive to the list of available drives.
Editing and Deleting Drives
To edit or delete a drive, select a drive from the list of available drives and do one of the following:
•
Edit - Click Edit and configure the drive as described in "Adding Drives."
• Delete - Click Delete to remove the drive.
Configuring Thin Client Settings Locally
25
Hotkeys
Use the Hotkeys tab to map hotkeys on the thin client (select a Hotkey option using the
Hotkey lists for each function you want).
COM Ports
Use the COM Ports tab to map COM ports on the server to devices on the thin client, and to view and manage (add and delete) the list of current COM ports (including device information) mapped on the thin client.
Adding COM Ports
1. Click Add to open the Add COM Port Mapping dialog box.
2. Select a COM Port (1 to 4) from the COM Port list.
3. Select a device from the Device list.
4. Click OK to add the COM port and device to the list of available COM Ports.
Deleting COM Ports
To delete a COM Port, select a COM Port from the list of available COM Ports and click
Delete.
26
Chapter 3
Display
Use the Display tab to set:
• Scroll Adjustment - If you encounter over-scrolling when using certain published applications, increase the adjustment by 100 until the display improves (maximum scroll adjustment is 1000).
• PrintScreen - Select to use the Print Screen key to capture an image of the desktop to the Clipboard (used for ICA XCapture support). If the check box is selected, a message appears warning about the influence of this setting on other applications).
Firewall
Use the Firewall tab to set the firewall options on the thin client:
• Automatically detect proxy - Detects proxy servers automatically.
• Use Alternate Address for Firewalls - Enables connections behind a firewall
• Proxy Type - Select a Proxy Type from the list and if necessary (Secure (HTTPS) or
SOCKS, enter the Proxy Address and Port).
Configuring Thin Client Settings Locally
27
Trusted Server Configuration
Use the Trusted Server Configuration tab to set and enforce the trusted server configuration. To enforce a trusted server configuration, select the Enabled option, select the Enforce trusted server configuration check box, enter the Address of the trusted server, and then click OK (you can also use the Enabled or Disabled options to quickly enable or disable the enforcement configuration).
28
Chapter 3
Import Certificates
Clicking the Import Certificates icon in the Control Center opens the Import Certificates dialog box. Use this dialog box to import and manage (add and delete) ICA Digital
Certificates as described in "Adding Certificates from a Remote Server" and "Adding
Certificates from a Local Device."
Adding Certificates from a Remote Server
Use the following guidelines (certificate files you add from a remote server must end with the extension .crt, and be DER-encoded or Base64-encoded):
1. In the Import Certificates dialog box, click Add to open the Add Certificate dialog box.
2. Select the Remote Server option, and then click Next to open the Certificate Import
Server Settings dialog box.
3. Select the Remote Certificate Source server option that contains the certificate you want. If you select the Use the following Server option, enter the Import Server URL
(supported protocols are ftp, http, and https) and the User name, and Password required for that server.
4. Select the certificate file from the Certificate file list (if the Import Server URL, User
name, and Password are entered correctly, this list automatically displays the names of available certificates on the server).
5. After the configuring the Remote Certificate Source server option you selected, click
Add.
Configuring Thin Client Settings Locally
29
Adding Certificates from a Local Device
1. In the Import Certificates dialog box, click Add to open the Add Certificate dialog box.
2. Select the Local Server option, and then click Next to open the Open File dialog box.
3. Use the folders and command buttons to find and select the certificate you want to use.
30
Chapter 3
INI and Upgrade Settings
Use the INI and Upgrade Network Settings dialog box (click INI and Upgrade Settings) to direct the thin client to the source (server location) of INI files and image updates.
Caution
It is recommended to obtain INI files through a DHCP server using DHCP options rather than through a static IP address. For information about how
INI files and images are downloaded from the server, see "How to Set Up
Automatic Configurations and Updates."
Tip
Wyse devices also support INI updates through Wyse Device Manager’s
DDC (see "Wyse Device Manager (WDM)" and "WDM (Agent
Use the following guidelines:
• Do not use INI files - Use this option when you want to use only locally configured settings (using the thin client dialog boxes available) and do not want to use available
INI files on the network or local INI files.
• Use INI files from server only - Use this option when you want to use INI files from the specified server only (for example, you do not want to use local INI files or do not want to allow INI use when disconnected from the server for security reasons). When using this option you can direct the thin client to the server location through either of the following ways:
·
DHCP Server - Select the Get INI and Upgrade server details via DHCP check box. The DHCP server will direct the thin client (using DHCP options) to the server location where the INI files and image updates reside.
·
Manually entered server address - Clear the Get INI and Upgrade server
details via DHCP check box and enter the static INI Settings (INI Server URL, and optionally the Username and Password of the server, if selecting the Server
requires authentication check box).
• If server is available, use INI files from server only; otherwise use local INI files -
Use this option when you want to use INI files from the specified server, however, local
INI files can be used if that server is unavailable. When using this option you can direct the thin client to the server location through either of the following ways:
·
DHCP Server - Select the Get INI and Upgrade server details via DHCP check box. The DHCP server will direct the thin client (using DHCP options) to the server location where the INI files and image updates reside.
·
Manually entered server address - Clear the Get INI and Upgrade server
details via DHCP check box and enter the INI Settings (INI Server URL, and
Configuring Thin Client Settings Locally
31
optionally the Username and Password of the server, if selecting the Server
requires authentication check box).
• Use local INI files only - Use this option when you want to use only local INI files and do not want to use available INI files on the network.
Tip
INI files can be cached locally if using the EnableLocal and LocalCopy INI parameters; see Reference Guide: Wyse
®
Enhanced SUSE Linux
Enterprise INI Files.
• Image Upgrade Settings - You can click Image Upgrade Settings to configure the
INI and upgrade network settings as described in "Configuring the Image Upgrade
Configuring the Image Upgrade Options
Using the INI and Upgrade Network Settings dialog box, you can configure how the image on the thin client is updated if you manually configured the INI server URL as
described in "INI and Upgrade Settings."
In the INI and Upgrade Network Settings dialog box, click the Image Upgrade Settings to open and use the Thin Client Settings dialog box.
Use the following guidelines:
• Update Mode - select either:
·
No Update - Image updates are disabled.
·
Base System & Add-ons - The base image and add-ons are updated at each reboot.
·
Base System Only - Only the base image is updated at each reboot.
·
Add-ons Only - Only add-ons are updated at each reboot.
• Enter the Update Server URL. If the server from which the thin client updates requires authentication, select the Server required authentication check box and enter the
Username and Password.
• Restore factory defaults when updating - When selected, removes all local-machine customizations when software is updated from the file server. This setting is enabled by default and is recommended. However, if you want to keep locally defined connections or custom changes to installed applications, you can clear this check box.
Tip
In order to update with the Restore factory defaults when updating option disabled, you must have a properly set-up addons folder with a directory file that defines which software versions you want on the thin client. Moreover, it
32
Chapter 3 may take two full reboots to restore the latest software as well as your customizations.
• Force base system update - If you want to install the image and add-ons available on the file server regardless of whether or not they are the same as the currently installed image and add-ons on the thin client, select this check box.
Tip
The Restore factory defaults when updating option and the Force base
system update option are useful when you want to fully restore the unit to factory defaults. These options remove any customizations and install only the base image supplied by Wyse.
• Click OK to return to the INI and Upgrade Network Settings dialog box.
Network Connections
Use the Network Connections dialog box (click Network Connections) to configure the settings you want for supported network connections. Use the Wired, Wireless, Mobile
Broadband, VPN, and DSL tabs to view and manage (add, edit, and delete) the list of network connections configured on the thin client. By default, your thin client obtains information from the DHCP server about network connections (highly recommended), but you can manually enter connection information (provided by your network administrator) to connect to other networks (experienced users only).
Configuring Thin Client Settings Locally
33
Novell Add-on Manager
Use the Novell Add-on Manager dialog box (click Novell Add-on Manager) to view and manage (add and remove) the list of add-on packages available. Add-ons that are selected in the list have been installed on your thin client.
To install add-ons, your thin client must be connected to the correct update server and folder on that server. If you receive a Failed to download available add-on list error message, click Server Settings in the Novell Add-on Manager dialog box to open and
use the Thin Client Settings dialog box as described in "Configuring the Image Upgrade
Options" (IMPORTANT: In the Update Server URL text box, be sure to enter the root path
on the server followed by the path to the Addons folder). The Novell Add-On Manager populates the list with add-ons listed in the directory plain text file located in the addons
folder (see "Step 1: Prepare the Root Directory and Folder Structure on the Server").
Use the following guidelines to install and uninstall add-ons:
• Installing add-ons - Select the check box of the add-on and click Execute.
• Uninstalling add-ons - Clear the check box of the add-on and click Execute.
Power Management
Use the Power Management Preferences dialog box (click Power Management) to select On AC Power (actions and display), On Battery Power (actions and display for
mobile thin clients), General (actions, notifications, and extras), and Scheduling
(automatic wake-up) power preferences. Press the Power button to wake the thin client from standby or sleep mode.
34
Chapter 3
Screensaver
Use the Screensaver Preferences dialog box (click Screensaver) to select screen saver theme settings and power management settings (click Power Management to open and
use the Power Management Preferences dialog box - see "Power Management").
Tip
Press the Power button to wake the computer from standby or sleep mode.
Configuring Thin Client Settings Locally
35
TCX USB Virtualizer
Use the TCX USB Virtualizer Configuration Utility dialog box (click TCX USB
Virtualizer) to view and manage (add, edit, and delete) the list of current device classes
(on the Configuration tab) and to view the list USB devices enabled or denied for use on the thin client (on the USB Devices tab). You can deny a device class, but still permit a
USB device in that class to be used, by adding it to the Devices list of the Configuration tab.
Use the following guidelines:
• Enabling USB devices - Select the Enabled check box (default).
• Allowing or denying USB device classes - On the Configuration tab, select or clear the check box of a device class in the Devices list to allow or deny its use. For example, select Smart Card Devices to permit USB smart card devices to be used to log into virtual machines.
• Adding a USB device - On the Configuration tab, click Add to open the Add dialog box, enter a Device Name, select a class for the device from the Class list, enter the
Sub Class, Vendor ID, Protocol, and Product ID, and then click Add. After you reboot your thin client, the name of the new device appears on the Configuration tab.
Tip
You can obtain device Class, Sub Class, Protocol, Vendor ID, and Product ID information by plugging the device into the USB port of your thin client and viewing the information displayed in the USB Devices tab.
• Allowing or denying a USB device - After you add a USB device, its name appears on the Configuration tab. Select or clear a USB device check box to allow or deny its use.
Caution
Use caution when using TCX USB Virtualizer on a terminal server, as allowing use of a USB device is global and not session restricted.
For information on the TCX USB Virtualizer component of Wyse TCX Suite software, refer
36
Chapter 3
User Administration
Use the User Administration dialog box (click User Administration) to view and edit passwords for all users (both built-in defaults and those defined through INI files) and to enable automatic login for a user (automatically log in a user at system start up). In addition, you can manage SSH root User password and login (using the SSH root User tab).
Caution
While this dialog box allows you to edit the passwords and automatic login for users of the thin client, you must use central configuration (INI files) to add or delete users beyond the built-in default users provided. In general, it is recommended that you use user.ini files to manage (add, edit, or delete) users for normal use cases. For example, a new user should be created through a user.ini file with the appropriate privilege level defined in the text file.
To edit a user password, select the change password check box you want, and then enter a new password in the New Password and Confirm Password boxes.
Tip
The Users tab can be a convenient way to locally change the password and enable automatic login for a specific user.
Configuring Thin Client Settings Locally
37
VNC Server (Preferences for Shadowing/Monitoring)
Use the VNC Server Preferences dialog box (click VNC Server) to select Sharing,
Security, and Notification VNC Server preferences for use with remote administration. For example, you can set the Security password (the password an administrator must use when shadowing the thin client) in this dialog box.
Tip
Administrators Only: Details on Using TightVNC Viewer for Remote
Administration (to Shadow/Monitor a Thin Client)
TightVNC Server is installed locally on the thin client (see "VNC Server (Preferences for
Shadowing/Monitoring)"). It allows a thin client to be shadowed/operated/monitored from a
remote machine on which TightVNC Viewer is installed (TightVNC Viewer is available from the TightVNC Web site; it is also included as a component of Wyse Device Manager software and must be installed on the remote/shadowing machine before use).
TightVNC (Server and Viewer) allows a remote administrator to configure or reset a thin client from a remote location rather than making a personal appearance at the thin client site (VNC is intended primarily for support and troubleshooting purposes). TightVNC
Server starts automatically as a service at thin client startup. The service can also be stopped and started by using the Services window (opened by clicking Start > Control
Panel > Administrative Tools > Services).
Before an administrator on a remote machine (on which TightVNC Viewer is installed) can access a thin client (with TightVNC Server) the administrator must know the:
• IP Address (or valid DNS name) of the thin client that is to be shadowed/operated/
monitored (see "Viewing System Information"). To obtain the IP address of an
administrator thin client, hover the mouse arrow over the VNC icon in the system tray of the Administrator taskbar.
• Security Password of the thin client that is to be shadowed/operated/monitored (see
"VNC Server (Preferences for Shadowing/Monitoring)").
38
Chapter 3
To shadow a thin client from a remote machine:
1. Open the New Tight VNC Connection dialog box (for example, Start > All Programs
> TightVNC > TightVNC Viewer).
2. Enter the IP address or valid DNS name of the thin client that is to be shadowed/ operated/monitored (you can also set other options using the command buttons).
3. Click OK to open the VNC Authentication dialog box.
4. Enter the Password of the thin client that is to be shadowed (this is the Security
Password of the thin client that is to be shadowed - see "VNC Server (Preferences for
Shadowing/Monitoring)") and click OK. The thin client that is to be shadowed/operated/
monitored will be displayed for the administrator in a separate window on the remote machine. Use the mouse and keyboard on the remote machine to operate the thin client just as you would if you were operating it locally.
WDM (Agent Configuration)
Use the WDM Agent Configuration dialog box (click Wyse WDM) to configure the Wyse
Device Manager server location.
Tip
It is recommended that after configuring, you reboot the thin client.
To configure the WDM server location:
1. Enter the WDM Server IP address.
2. Enter the Client to Sever Port (default, is 80).
3. Enter the Secure Port (HTTPS port default is 443).
4. Click OK.
4
Configuring Connections Locally
This chapter provides instructions on configuring and adding connections to your Desktop for use (to access the enterprise server environment available to the thin client).
Tip
While it is not recommended to use dialog boxes for configuring connections for thin client use, they are available in case you want to temporarily override central default configurations or you do not have the option to set up central configuration (smaller environments). In general, it is recommended that you use central configuration to enable you to automatically push updates and any desired default configuration to all supported thin clients in your
environment (see "Central Configuration: Automating Updates and
In addition, the Wyse USB Firmware Tool also provides a simple USB
imaging solution for supported devices (see "Wyse USB Firmware Tool").
Clicking Connection Manager in the Computer menu (see "Using Your Desktop") or in
the Application Browser (see "Accessing Applications with the Application Browser")
opens the Connection Manager.
Use the Connection Manager to manage (edit and delete), connect to, and add the following connections:
•
•
•
•
"Ericom PowerTerm® WebConnect"
•
•
•
•
•
•
NOTE: You can also access the Control Center (click Control Center) and use the Shut
Down dialog box (click Logout). Depending on user privilege level, some dialog boxes and options may not be available for use.
40
Chapter 4
Browser (Mozilla Firefox)
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select Browser from the list and click Next to open the Mozilla Firefox Browser
Configuration dialog box.
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Network
Use the Network tab to configure the description and URL (optional if you want the browser to open to a particular Web page each time you connect). If you want the browser to launch automatically after system startup, select the Auto Connect check box.
Window
Use the Window tab to configure how the browser window is displayed. If you want the browser to appear without any menus or toolbars, select Kiosk Mode. Select the Window
Size you want from the list.
Auto Reconnect
Use the Auto Reconnect tab to enable automatic reconnect after a disconnection (select the Enable Auto Reconnect check box, and then select the amount of time to delay the reconnection attempt after a disconnection occurs).
Configuring Connections Locally
Custom
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select Custom from the list and click Next to open the Custom Connection
Configuration dialog box.
41
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Application
Use the Application tab to configure:
• Description - Enter the description.
• Command Line - Enter the command line for the program on the server.
• Run in terminal window - Runs the application in a terminal window (use with applications that require a terminal window such a console program).
• Auto Connect - Starts the connection automatically after system startup.
Auto Reconnect
Use the Auto Reconnect tab to enable automatic reconnect after a disconnection (select the Enable Auto Reconnect check box, and then select the amount of time to delay the reconnection attempt after a disconnection occurs).
42
Chapter 4
Ericom PowerTerm
®
TEC
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select Ericom_PowerTerm from the list and click Next to open the Terminal
Emulator Configuration dialog box.
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Network
Use the Network tab to configure the network settings:
• Network Connection or Serial Connection - Select Network Connection for connections over TCP/IP, or Serial Connection for connections through a serial port.
• Description - Enter a description for the connection.
• Host - Enter a host name or IP Address (or select one from the list). Host can be populated from the global Ericom — PowerTerm
®
TEC connection application.
• Port - Enter the port of the host.
• Terminal Type - Select a terminal type.
• Terminal Name - Enter a name for the terminal.
• Save Configuration Locally - Saves the font, color, key-mapping and other settings of the Ericom — PowerTerm
®
TEC application locally.
Window
Use the Window tab to select the Window Size you want.
Connection
Use the Connection tab to configure the connection settings:
• Auto Connect - Starts the connection automatically after system startup.
• Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
• Auto Reconnect - Reconnects automatically after a disconnection occurs.
• Delay before retrying - Select the amount of time to delay the reconnection attempt after a disconnection occurs.
Configuring Connections Locally
Setting
Use the Setting tab to automatically run script during user logon (enter the script name and path).
43
Remote Configuration
Use the Remote Configuration tab to configure:
• Remote Configuration Filename - Enter the remote configuration filename for the connection.
• Remote Configuration Path - Enter the remote configuration path for the connection.
View
Use the View tab to select the items that will appear when using the connection (menu, toolbar, status bar, and buttons).
44
Chapter 4
Ericom PowerTerm
®
WebConnect
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select Ericom_Webconnect from the list and click Next to open the Terminal
Emulator Configuration dialog box.
3. Use this dialog box to configure the settings you want (Server can be a host name or
IP Address). After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
ICA
Configuring Connections Locally
45
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select ICA from the list and click Next to open the Citrix ICA Client Settings dialog box.
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Tip
When using multiple ICA connections, you can use the ICA Connection
Center to manage the open ICA connections. For more information on using multiple ICA connections, refer to the Wyse Knowledge Base on the Wyse
Web site.
Network
Use the Network tab to configure the network settings:
• Server or Published Application - Select an option for making the connection.
• Description - Enter a description for the connection.
• Network Protocol - Select a network protocol.
• Browser Server - Enter the Browser Server name (this can be a list of server names with each name separated by a semi-colon).
Tip
You do not need to enter a browser server name if you do not want to connect to either a published application or a server by name. Generating an
ICA connection to a server using a server name in the Server text box for the connection does not require a Browser Server address, as long as the DNS information is properly entered.
• Server or Application Name - Select a server from the Server list or a published application from the Application Name list. If needed, click Refresh to refresh the list of servers or published applications.
Tip
You can enter the IP address of the target server as long as there is no need to resolve a name.
46
Chapter 4
Connection
Use the Connection tab to configure the connection settings:
• Enable compression - Enables compression.
• Low bandwidth - Enables low-bandwidth optimization.
• Enable sound - Enables sound.
• Ping before connect - Pings the connection to see if it is reachable before the connection is attempted.
• Enable Middle Button Paste - Enables middle button paste for the mouse.
• Encryption - Select an encryption type (default is Basic).
Window
Use the Window tab to select the Window Colors and the Window Size you want.
Application
Use the Application tab to enter the command line and Working Directory of the application (if you selected the Published Application option on the Network tab):
• Command Line - Enter the command line for the program on the server.
• Working Directory - Enter the working directory for the program.
Login
Use the Login tab to configure credentials used to automatically log in to the server:
• User Name - Enter a user name for the connection.
• Password - Enter the password.
• Domain - Enter the domain name.
• Serial Number - Enter the serial number for Metaframe environments that require the thin client license serial number.
• Connect automatically after login - Enables an automatic connection after successful login to the thin client.
Tip
The User Name, Password, Domain, and Serial Number fields are optional. If the User Name, Password, and Domain fields are blank, interactive login is required (users must enter the information at login time).
Auto Reconnect
Use the Auto Reconnect tab to enable automatic reconnect after a disconnection (select the Enable Auto Reconnect check box, and then select the amount of time to delay the reconnection attempt after a disconnection occurs).
Firewall
Use the Firewall tab to configure an alternate address for firewalls:
• Automatically detect proxy - Select to automatically detect the proxy type.
• Use Alternate Address for Firewalls - Select Yes to use an alternate address for firewalls.
Configuring Connections Locally
• Proxy Type - Select a proxy type.
• Proxy Address and Port - If you select Secure (HTTPS) or SOCKS as the Proxy
Type, you must enter the Proxy Address and Port.
Tip
Published applications do not support Firewall functions.
47
48
RDP
Chapter 4
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select RDP from the list and click Next to open the Remote Desktop (RDP)
Configuration dialog box.
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Network
Use the Network tab to configure the network settings:
• Description - Enter a description for the connection.
• Server - Enter a server name or IP address.
• Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
• Notify When Disconnected - Notifies you when the connection is broken.
RD Gateway
Use the RD Gateway tab to enable and configure an RD Gateway to connect to your remote computers (if required by your network administrator):
• Use RD Gateway Settings - Select to enable RD Gateway and then do one of the following:
·
Server, Username, Password, Domain - Enter the IP address or URL of the
Remote Desktop Gateway (RD Gateway) server, and then enter the Username,
Password, and Domain of the RD Gateway server (if required).
·
Use Same Connection Credentials for RD Gateway - Select if the server credentials are the same credentials as your RDP host remote computer credentials and then enter the Server IP address or URL of the Remote Desktop
Gateway (RD Gateway) server.
Tip
An RD Gateway server is a type of gateway that enables authorized users to connect to remote computers on a corporate network from any computer with an Internet connection. An RD Gateway server enables Remote Desktop connections to a corporate network from the Internet without having to set up virtual private network (VPN) connections. Ask your network administrator whether you need to specify an RD Gateway server.
Configuring Connections Locally
Connection
Use the Connection tab to configure the connection settings:
• Compression - Enables compression.
• NT4 compatible - Enables RDP protocol version 4.
• Low bandwidth - Enables low-bandwidth optimization.
• Sound - Select audio source for the connection (Local or Remote).
• Encryption Level - Select an encryption level (Normal or None).
Tip
For servers with data encryption settings, you must select Normal for the encryption level.
49
Experience
Use the Experience tab to configure the experience settings for a user desktop:
• Grab ALL keyboard events when window has focus - Enables all keyboard events within the connection window to always be sent to the connection’s applications.
• Menu and window animation - Enables menu and window animation.
• Show contents of window while dragging - Shows the window content when the user drags the window on screen.
• Desktop Background - Displays the desktop background.
• Speed Level - Select a speed level to describe the network connection.
Tip
Consider your network restrictions when you select options on the
Experience tab. For example, be sure to configure the settings appropriately for your bandwidth level and so on.
Window
Use the Window tab to select the Window Colors and the Window Size you want.
Application
Use the Application tab to enter the command line and Working Directory of the application that will run at the beginning of a session:
• Command Line - Enter the command line for the program on the server.
• Working Directory - Enter the working directory for the program.
Login
Use the Login tab to configure credentials used to automatically log in to the connection:
• User Name - Enter a user name for the connection.
• Password - Enter the password.
• Domain - Enter the domain name.
• Use smart card - Enables the use of a smart card when connecting.
• Connect automatically after login - Enables an automatic connection after successful login to the thin client.
50
Chapter 4
• Network Level Authentication - Enables Network Level Authentication (NLA) and is required if NLA is enabled on your remote computer (your remote computer requires
NLA user authentication before you establish a full Remote Desktop connection and the logon screen appears).
Tip
The Username, Password, and Domain fields are optional. If you leave any of these fields blank, interactive login is required (users must enter the information at login time).
Auto Reconnect
Use the Auto Reconnect tab to enable automatic reconnect after a disconnection (select the Enable Auto Reconnect check box, and then select the amount of time to delay the reconnection attempt after a disconnection occurs).
Drive Mapping
Use the Drive Mapping tab to map share names on the server to USB mass storage devices attached to the thin client, and to view and manage (add, edit, and delete) the list of current server share names (including drive information) mapped on the thin client.
Adding Share Names
1. Click Add to open the RDP Drive Map dialog box.
2. Enter a Share Name.
3. Select a Drive Type (USB Floppy, USB CDROM, USB Disk or Memory Stick, or
Local or Mounted Disk).
4. (Optional) Enter the directory on the USB device to access in the Base Directory text box.
5. Click OK to add the Share Name to the list of available Share Names.
Configuring Connections Locally
Editing and Deleting Share Names
To edit or delete a Share Name, select a Share Name from the list of available Share
Names and do one of the following:
•
Edit - Click Edit and configure the Share Name as described in "Adding Share
• Delete - Click Delete to remove the Share Name.
51
Device Mapping
Use the Device Mapping tab to map devices to ports on the thin client, and to view and manage (add and delete) the list of current devices (including device information) mapped on the thin client.
Adding Devices
1. Click Add to open the Add Port Mapping dialog box.
2. Select a port from the Port list.
3. Select the directory of the device to access from the Device list.
4. Click OK to add the device to the list of available devices.
Deleting Devices
To delete a device, select a device from the list of available devices and click Delete.
52
SSH
Chapter 4
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select SSH from the list and click Next to open the SSH Configuration dialog box.
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Network
Use the Network tab to configure the network settings:
• Description - Enter a description for the connection.
• Host - Enter a host name or IP address.
• Remote Username - Enter a username.
• Remote Command - Enter the command to execute on the server.
Connection
Use the Connection tab to configure the connection settings:
• Auto Connect - Starts the connection automatically after system startup.
• Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
• Auto Reconnect - Reconnects automatically after a disconnection occurs.
• Delay before retrying - Select the amount of time to delay the reconnection attempt after a disconnection occurs.
Configuring Connections Locally
VMware View Client
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select VMware_ViewClient from the list and click Next to open the VMware View
Client Settings dialog box.
53
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Tip
No special client-side configuration is needed to enable PCOIP connections.
This is configured on the View broker, and once a user logs in from the client and obtains a list of desktops, they will be presented with an option to choose
PCOIP or RDP (based on server settings).
Network
Use the Network tab to configure the network settings:
• Description - Enter a description for the connection.
• Host - Enter a host name or IP address.
• Port - Enter the port of the host.
• Use Secure Connection (SSL) - Select to use an SSL connection.
• Enable interactive mode - Enables interactive mode.
Window
Use the Window tab to select a Desktop size and whether to use full screen on all monitors.
Login
Use the Login tab to configure credentials used to automatically log in to the connection:
• User Name - Enter a user name for the connection.
• Password - Enter the password.
• Domain Name - Enter the domain name.
• Desktop - Enter the desktop name.
54
Chapter 4
Connection
Use the Connection tab to configure the connection settings:
• Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
• Connect automatically after login - Enables an automatic connection after successful login to the thin client.
• Auto Reconnect - Reconnects automatically after a disconnection occurs.
• Delay before retrying - Select the amount of time to delay the reconnection attempt after a disconnection occurs.
Configuring Connections Locally
VNC Viewer
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select VNC_Viewer from the list and click Next to open the VNC Viewer Settings dialog box.
55
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Network
Use the Network tab to configure the network settings:
• Description - Enter a description for the connection.
• Host - Enter a host name or IP address.
• Connect to - Select a connection type of either Display number (enter the display to connect to on the server) or Port number (enter the port to connect to on the server).
• Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
Connection
Use the Connection tab to configure the connection settings:
• Compression Level - Select a compression level for encoding.
• Shared - Enables or disables a shared connection.
• View Only - Blocks mouse and keyboard events for a view-only connection.
Window
Use the Window tab to configure window settings:
• JPEG Quality - Specifies the image quality for encoding.
• Full Screen - Opens the connection in a full-screen window.
• Color Depth - Controls how many colors to display with each on-screen pixel.
Login
Use the Login tab to configure credentials used to automatically log in to the VNC server:
• Password - Enter the password to connect to the VNC server.
• Connect automatically after login - Enables an automatic connection after successful login to the thin client.
56
XDMCP
Chapter 4
1. In the Connection Manager, click Add to open the Add Connection dialog box.
2. Select XDMCP from the list and click Next to open the XDMCP Client Settings dialog box.
3. Use this dialog box to configure the settings you want. After configuring the settings you want, click OK. The connection appears in the Connection Manager and is ready to use.
Network
Use the Network tab to configure the network settings:
• Description - Enter a description for the connection.
• Host - Enter a host name or IP address of an XDMCP server.
• Connect Style - Select a connection mode: Query, Chooser, or Broadcast.
• Connect Program - Select the program through which the connection is made: Xnest or Xserver.
Window
Use the Window tab to select the Window Colors and the Window Size you want.
Connection
Use the Connection tab to configure the connection settings:
• Auto Connect - Starts the connection automatically after system startup.
• Ping Before Connect - Pings the connection to see if it is reachable before the connection is attempted.
• Auto Reconnect - Reconnects automatically after a disconnection occurs.
• Delay before retrying - Select the amount of time to delay the reconnection attempt after a disconnection occurs.
5
Accessing Applications with the
Application Browser
This chapter provides detailed information about using the Application Browser to access the applications, audio and video, and system features installed on the thin client.
Tip
For a list of supported addons you can install, contact Wyse. For information on adding and managing addons, refer to "Central Configuration Automating
Thin Client Configurations and Updates" and "Novell Add-on Manager."
Clicking More Applications in the Computer menu (see "Using Your Desktop") opens the
Application Browser.
Use the Application Browser to access the applications, audio and video, and system features installed on the thin client. This chapter includes information on:
•
•
"Displaying and Exporting Log Files (Using the Diagnostics Log Viewer)"
•
"Managing the Ericom PowerTerm® TEC Servers Available for Connections"
•
"Configuring Volume Control Settings"
•
•
Tip
Clicking the Connection Manager icon in the Application Browser opens the
Connection Manager. Use the Connection Manager to configure and add
connections to your Desktop for use as described in "Configuring
58
Chapter 5
Performing Diagnostics
Use the Diagnostics dialog box (click Diagnostics) to select and use a diagnostic tool:
• Ping - Enter or select a destination from the Destination list and click Ping.
• Trace Route - Enter or select a destination from the Destination list and click Trace
Route (diagnostic information appears on the Trace Route tab).
• Temporary Settings - View the temporary settings of the thin client.
• Permanent Settings - View the permanent settings of the thin client.
• wlx.ini/wnos.ini - View the wlx.ini or wnos.ini file as copied to the thin client.
• user.ini - View the user.ini file as copied to the thin client.
Displaying and Exporting Log Files (Using the Diagnostics Log Viewer)
Use the Diagnostics Log Viewer dialog box (click Diagnostics Log Viewer) to display and export log files to a USB key or remote server.
The Diagnostics Log Viewer displays the related messages of the log file name you have highlighted (click the name to highlight) in the Log Name list. To include debug messages for log files, select the More Logs check box, click Apply, and then restart the device for the change to take effect (now when you highlight the log file you want to display, debug messages will also display in the results pane).
Accessing Applications with the Application Browser
59
You can export the log files you select (click all or any of the check boxes you want in the Log Name list) to a:
• USB Key - Attach a USB key to the client, open the Diagnostics Log Viewer, select the check boxes you want in the Log Name list, select USB Key, and then click
Next to use the Export Logs dialog box.
• Remote Server - Select the check boxes you want in the Log Name list, select
Remote Server, and then click Next to use the Export Logs dialog box. Note that, you can export the log files to a default server (server from the default registry) or to any server by specifying the URL path and server credentials.
NOTE: Permanent and temporary registry logs will be exported by default.
Managing the Ericom PowerTerm
®
TEC Servers Available for Connections
Use the Ericom PowerTerm Terminal Emulation dialog box (click Ericom PowerTerm) to view and manage (add and delete) the list of servers that are presented when an
Ericom PowerTerm
®
TEC connection is being configured for thin client access to network
resources as described in "Ericom PowerTerm® TEC."
Use the following guidelines:
• Adding a hostname - Click Add to open the Add host dialog box, enter a Hostname, and then click OK. The hostname is added to the Hostname list.
• Deleting a hostname - Select a hostname and click Delete. The hostname is removed from the Hostname list.
60
Chapter 5
Configuring Volume Control Settings
Use the Volume Control dialog box (click Volume Control) to select Playback (system sounds), Recording (application recording sounds), Output Devices (left and right sounds), Input Devices (left and right sounds), and Configuration (profile) volume preferences. You can use the Show list on the Playback, Recording, Output Devices, and
Input Devices tabs to select which items you want shown.
Tip
For these settings to take effect, sound must be supported and enabled on the server used for ICA connections, RDP connections, or MPlayer. Sound requires significant bandwidth that may not be available on some WAN and dial-up connections.
Taking Screenshots
Use the Take Screenshot dialog box (click Take Screenshot) to select screenshot preferences and effects (for example, entire desktop with pointer, current window with a border, or a selected area). After setting your preferences, click Take Screenshot to take the screenshot and open the Save Screenshot dialog box allowing you to name and save the file.
Accessing Applications with the Application Browser
61
Using XTerm
XTerm is the standard terminal emulator for the X Window System. Use the terminal emulator window for X (click XTerm) to access a text terminal and all its applications such as command line interfaces (CLI) and text user interface applications. You can click the
Window menu (upper left icon) to open and use the XTerm menu. You can type help and press Enter to display a verbose message describing XTerm options.
62
Chapter 5
This page intentionally blank.
A
Central Configuration: Automating
Updates and Configurations
This appendix describes how to set up your environment to provide your thin clients running Wyse Enhanced SLE with automatic updates and configurations in three simple steps.
It includes:
•
•
"How to Set Up Automatic Configurations and Updates"
Tip
Wyse thin clients do not require device management software. They are configured to obtain their IP address, as well as the location of firmware and
configuration instructions, from a DHCP server. However, you can use "Wyse
Device Manager (WDM)" or the "Wyse USB Firmware Tool" for a more
hands-on management of client configurations and updates. For information
about configuring thin clients to communicate with a WDM server, see "WDM
(Agent Configuration)" and related INI parameters in Reference Guide: Wyse
®
Enhanced SUSE Linux Enterprise INI Files.
How INI files Are Employed
INI files (created and maintained by the network administrator) determine how the thin client is configured and updated. The thin client accesses INI files from the server during the initialization process. Typically, INI files are accessed through FTP, HTTP, and HTTPS; if no protocol is specified, the default is anonymous FTP.
INI files are employed as follows:
• wlx.ini - This is the global INI file. One wlx.ini file is available to all users. It contains global parameters for all thin clients accessing the server. If the operating system cannot find wlx.ini, it defaults to wnos.ini.
• {username}.ini - This file is unique to each user. The {username}.ini file contains the connection profile for each user. Parameters in the user profile generally supersede the identically named global parameters.
• $MAC.ini - This file can be used for device-specific configuration. If the thin client locates this INI file (it is stored in the same directory as wlx.ini), wlx.ini is not accessed, unless you use the include=wlx.ini parameter.
When a thin client is initialized, it accesses the global wlx.ini file. When a user logs in, the thin client accesses the user’s unique {username}.ini file. For detailed information on constructing and using Wyse Enhanced SLE INI files, refer to Reference Guide: Wyse
®
Enhanced SUSE Linux Enterprise INI Files.
Tip
If both PNLite and a user profile are being used, the username must be defined in the Windows domain to be used, and the password must be the same for the domain and the profile.
64
Appendix A
How to Set Up Automatic Configurations and Updates
For a Wyse thin client running Wyse Enhanced SLE to successfully access INI files and update itself from a server, you must set up the server with the correct folder structure
(where the INI files and other update files are located), direct the thin client to the server, and then reboot or start the thin client.
After DHCP and servers are configured and available, the thin client checks (at each boot up) to see whether or not any updates are available on a predefined server (DCHP Option
#161specifies the server URL, DCHP Option #162 specifies the root path to the server). If updates are available, the updates are automatically installed.
Step 1: Prepare the Root Directory and Folder Structure on the Server
Set up the following folder structure on your server under the C:/inetpub/ftproot folder (for
FTP) or C:/inetpub/wwwroot folder (for HTTP or HTTPS) and place your INI files and other necessary files inside the structure as noted (this list describes the folder structure, starting with the root directory).
/wyse/ The root directory. It stores the wlx folder and the addons folder.
It also stores the following files, which are used for imaging and updating devices:
• Latest-image.raw
•
Latest-image.raw.info
/wyse/wlx The main INI configuration folder. It stores the following:
• wlx.ini file or $MAC.ini file
• bitmap folder
• certs folder
• ini folder
/wyse/wlx/bitmap
/wyse/wlx/certs
/wyse/wlx/ini
/wyse/addons
The folder where you can place custom images you plan to use.
The folder where you can place the CA certificates that can be imported to a thin client.
Note: Use the Certs and ImportCerts INI parameters in the wlx.ini file to import the certificates to thin clients.
The folder where you can place the {username}.ini files.
The folder where you can place the add-ons you want to use.
It also stores the directory file and the *.rpm packages available to be installed on the thin client. The directory file should list all available add-ons. The directory file is required in the addons folder to guarantee that add-ons are properly located.
NOTE: If you want to do an update with the Preserve changes option enabled, ensure that your addons folder includes a copy of your current add-ons. The system may require two reboots to fully update the firmware and add-ons while preserving local changes.
Central Configuration: Automating Updates and Configurations
65
The following figure shows how to set up the folder structure on your file server and where to place INI files and other necessary files inside the structure.
Be sure to create/activate the two required MIME Types (.ini and .) under IIS (on a per site basis) to enable downloading. Also be sure your Web server can identify the file types used by Wyse thin clients.
To create/activate the .ini MIME Type:
1. On your IIS server, use the File Types menu to add a New Type.
2. In the File Type dialog box, enter the Associated extension .ini and Content type
(MIME) text/plain.
3. Click OK to apply the settings.
To create/activate the . MIME Type:
1. On your IIS server, use the File Types menu to add a New Type.
2. In the File Type dialog box, enter the Associated extension . and Content type (MIME)
text/plain.
3. Click OK to apply the settings.
For detailed instructions on adding the .ini and . MIME Types, refer to Wyse Knowledge
Base Solution #21581 (go to the Wyse Knowledge Base at http://www.wyse.com/kb and search for 21581).
66
Appendix A
Step 2: Direct the Thin Client to the Server
After you set up the folder structure and populate it with the correct files, you must then direct the thin client to the location of the server by one of the following ways:
•
•
Manual direction (see "Manually Configuring the Server Location")
Tip
Using DHCP is strongly recommended.
Using DHCP
When using DHCP to direct the thin client to the location of the server (recommended), information about the server and root directory is obtained from the following DHCP options:
• 161 - The server.
• 162 - Root path to the server (ftp/http/https).
·
If no root path is defined, /wyse is assumed.
·
If a root path is defined, the additional path will be appended to the URL supplied by option 161.
• 184 - (Optional) Server username (to server specified in option 161).
• 185 - (Optional) Server password (to server specified in option 161).
Tip
Check-in for firmware updates is done early in the boot process. For that reason, changes in DHCP information may not be propagated to a unit until a full boot is completed. However, you can avoid this by forcing a renewing of the DHCP lease, which makes sure that the unit has the latest file-server location before the next firmware check. Simply, right-click the Network
Manager icon, click Enable Networking to disable it, right-click the
Wireless Manager icon, and then click Enable Networking to enable it again (the DHCP lease is renewed).
Tip
For general instructions on adding DHCP Options #161 and #162, refer to
Wyse Knowledge Base Solution #16132 (go to the Wyse Knowledge Base at http://www.wyse.com/kb and search for 16132).
Use the guidelines shown in Table 2 when creating and adding the DHCP options you
need.
Table 2 DHCP Option Tags
2
3
Option
1
6
Description
Client identifier
Time Offset
Router
Domain Name Server
(DNS)
Notes
Always sent.
Optional.
Optional but recommended. It is not required unless the thin client must interact with servers on a different subnet.
Optional but recommended.
Central Configuration: Automating Updates and Configurations
67
Table 2 DHCP Option Tags, Continued
Option
12
15
28
44
51
52
53
54
55
57
58
59
61
161
162
181
182
Description
Host Name/Terminal
Name
Domain Name
Broadcast Address
WINS servers IP
Address
Notes
Optional string. The host name or terminal name to be set.
Optional but recommended. See Option 6.
Optional.
Optional.
Lease Time
Option Overload
Optional but recommended.
Optional.
DHCP Message Type Recommended.
DHCP Server IP
Address
Recommended.
Sent by appliance.
Parameter Request
List
Maximum DHCP
Message Size
Optional (always sent by thin client).
T1 (renew) Time
T2 (rebind) Time
Client identifier
Server (ftp/http/https)
Optional but recommended.
Optional but recommended.
Always sent.
Optional string. If this is an IP address or resolvable hostname, the protocol is assumed to be FTP; however, it may be the leading portion of a URL that specifies another protocol. If using the
URL form, it should not include a trailing slash
(for example, http://server.example.com or ftp://
192.168.0.1).
Root path to the server
(ftp/http/https)
Wyse PN Server
Wyse Admin List
Optional string. The relative directory starting from the root directory must be given. For example, on an FTP server, the full directory may be C:/Inetpub/ftproot/wyse, where wyse is the directory that contains the firmware. In this example, the correct string value for this DHCP option is /wyse.
On a Linux server, an FTP user-based directory might be /home/test/wyse. In this example, if the FTP user is test, then the FTP root path is
/wyse and not the full path (/home/test/wyse).
This value should use URL path notation (start with a forward slash, /, and use a forward slash as folder separators).
Optional string. IP address or FQDN of the
PNLite server.
Optional string. DHCP equivalent of the
DomainList
ini file parameter.
68
Appendix A
Table 2 DHCP Option Tags, Continued
Option
184
185
186
191
Description
Server Username
Notes
Optional string. Username to use when authenticating to the server specified in Option
161.
Server Password
Wyse Device Manager
(WDM) IP Address
Optional string. Password to use when authenticating to the server specified in Option
161.
Optional binary IP address of the WDM server.
This option can specify up to one Wyse Device
Manager server.
XenDesktop DDC URL
Optional string. See also "Desktop Appliance."
194 Wyse Device Manager
(WDM) FQDN
Optional FQDN of the WDM server. This option can specify up to one Wyse Device Manager server.
Manually Configuring the Server Location
To manually configure the file server location (not recommended), open the INI and
Upgrade Settings dialog box (Computer > Control Panel > INI and Upgrade Settings), and enter the URL (for HTTP or HTTPS; FTP URL is allowed for FTP) for the INI server in
the INI Server URL text box. For more information, see "INI and Upgrade Settings."
Tip
You can also click Image Upgrade Settings to configure the INI and
upgrade network settings as described in "Configuring the Image Upgrade
Step 3: Reboot the Thin Client
After you reboot (or start the thin client), the thin client will look in the defined root path for the latest available image and update if necessary. Additionally, it will check the directory file in the addons folder to see if any updates for installed add-ons are defined. Add-ons that exist in the addons folder but are not listed in the directory file, will be ignored during update check-in.
Tables
Window-related Shortcut Keys 5
Administrators Guide
Wyse
®
Enhanced SUSE Linux Enterprise
Issue: 113011
Written and published by:
Wyse Technology Inc., November 2011
Created using FrameMaker
® and Acrobat
®
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
Security
Flexibility
Usability
Easy-to-install add-ons
Central Management
User Experience Optimization
Frequently asked questions
Wyse Enhanced SUSE Linux Enterprise (SLE) combines the security, flexibility, and market-leading usability of SUSE Linux Enterprise from Novell® with Wyse’s thin computing optimizations in management and user experience.
Wyse Enhanced SLE comes pre-installed with the software needed for most thin computing deployments, including an ICA client, RDP client, Firefox Web browser, and the PowerTerm® Terminal Emulation client.
You can extend this base functionality through easy-to-install add-ons qualified and available through Wyse (such as ThinPrint support) or other packages that have been qualified for Novell SUSE Linux Enterprise Thin Client.